Building-Envelope-Inspired, Thermomechanically Robust All-Fiber Ceramic Meta-Aerogel for Temperature-Controlled Dominant Infrared Camouflage

The unsatisfactory properties of ceramic aerogels when subjected to thermal shock, such as strength degradation and structural collapse, render them unsuitable for use at large thermal gradients or prolonged exposure to extreme temperatures. Here, a building-envelope-inspired design for fabricating a thermomechanically robust all-fiber ceramic meta-aerogel with interlocked fibrous interfaces and an interwoven cellular structure in the orthogonal directions is presented, which is achieved through a two-stage physical and chemical process. Inspired by the reinforced concrete building envelope, a solid foundation composed of fibrous frames is constructed and enhanced through supramolecular in situ self-assembly to achieve high compressibility, retaining over 90% of maximum stress under a considerable compressive strain of 50% for 10 000 cycles, and showing temperature-invariance when compressed at 60% strain within the range of -100 to 500 °C. As a result of its distinct response to oscillation tolerance coupled with elastic recovery, the all-fiber ceramic meta-aerogel exhibits exceptional suitability for thermal shock resistance and infrared camouflage performance in cold (-196 °C) and hot (1300 °C) fields. This study provides an opportunity for developing ceramic aerogels for effective thermal management under extreme conditions.

Investigation of the ΔI=1/2 Rule and Test of CP Symmetry through the Measurement of Decay Asymmetry Parameters in Ξ^{-} Decays

Using (10087±44)×10^{6}  J/ψ events collected with the BESIII detector, numerous Ξ^{-} and Λ decay asymmetry parameters are simultaneously determined from the process J/ψ→Ξ^{-}Ξ[over ¯]^{+}→Λ(pπ^{-})π^{-}Λ[over ¯](n[over ¯]π^{0})π^{+} and its charge-conjugate channel. The precisions of α_{Λ0} for Λ→nπ^{0} and α[over ¯]_{Λ0} for Λ[over ¯]→n[over ¯]π^{0} compared to world averages are improved by factors of 4 and 1.7, respectively. The ratio of decay asymmetry parameters of Λ→nπ^{0} to that of Λ→pπ^{-}, ⟨α_{Λ0}⟩/⟨α_{Λ-}⟩, is determined to be 0.873±0.012_{-0.010}^{+0.011}, where the first and the second uncertainties are statistical and systematic, respectively. The ratio is smaller than unity more than 5σ, which signifies the existence of the ΔI=3/2 transition in Λ for the first time. Besides, we test for CP symmetry in Ξ^{-}→Λπ^{-} and in Λ→nπ^{0} with the best precision to date.

Observation of D_{s}^{+}→η^{'}μ^{+}ν_{μ}, Precision Test of Lepton Flavor Universality with D_{s}^{+}→η^{(')}l^{+}ν_{l}, and First Measurements of D_{s}^{+}→η^{(')}μ^{+}ν_{μ} Decay Dynamics

By analyzing 7.33  fb^{-1} of e^{+}e^{-} annihilation data collected at center-of-mass energies between 4.128 and 4.226 GeV with the BESIII detector, we report the observation of the semileptonic decay D_{s}^{+}→η^{'}μ^{+}ν_{μ}, with a statistical significance larger than 10σ, and the measurements of the D_{s}^{+}→ημ^{+}ν_{μ} and D_{s}^{+}→η^{'}μ^{+}ν_{μ} decay dynamics for the first time. The branching fractions of D_{s}^{+}→ημ^{+}ν_{μ} and D_{s}^{+}→η^{'}μ^{+}ν_{μ} are determined to be (2.235±0.051_{stat}±0.052_{syst})% and (0.801±0.055_{stat}±0.028_{syst})%, respectively, with precision improved by factors of 6.0 and 6.6 compared to the previous best measurements. Combined with the results for the decays D_{s}^{+}→ηe^{+}ν_{e} and D_{s}^{+}→η^{'}e^{+}ν_{e}, the ratios of the decay widths are examined both inclusively and in several ℓ^{+}ν_{ℓ} four-momentum transfer ranges. No evidence for lepton flavor universality violation is found within the current statistics. The products of the hadronic form factors f_{+,0}^{η^{(')}}(0) and the c→s Cabibbo-Kobayashi-Maskawa matrix element |V_{cs}| are determined. The results based on the two-parameter series expansion are f_{+,0}^{η}(0)|V_{cs}|=0.452±0.010_{stat}±0.007_{syst} and f_{+,0}^{η^{'}}(0)|V_{cs}|=0.504±0.037_{stat}±0.012_{syst}, which help to constrain present models on f_{+,0}^{η^{(')}}(0). The forward-backward asymmetries are determined to be ⟨A_{FB}^{η}⟩=-0.059±0.031_{stat}±0.005_{syst} and ⟨A_{FB}^{η^{'}}⟩=-0.064±0.079_{stat}±0.006_{syst} for the first time, which are consistent with the theoretical calculation.

Engineering self-assembled 2D nano-network membranes through hierarchical phase separation for efficient air filtration

Air pollution has garnered significant worldwide attention; however, the existing air filtration materials still suffer from issues related to monotonous structure and the inherent trade-off between PM rejection and air permeability. Herein, a spider web-inspired composite membrane with continuous monolayer structured 2D nano-networks tightly welded on nanofibers in the electrospun membrane scaffold is designed via a hierarchical phase separation strategy. The resultant biomimetic hierarchical-structured membranes possess the integrated features of hierarchical multiscale structures of 2D ultrafine networks composed of nanowires with a diameter of 31 nm self-assembled by nanoparticles, exceptional characteristics involving small average aperture, extremely low network thickness, high porosity and promising pore channel connectivity, combined with rich surface polar functional groups (3.02D dipole moment). Consequently, the composite membrane exhibits a high PM0.3 capture efficiency of 99.6 % and low pressure drop of 58.8 Pa, less than 0.06 % of atmosphere pressure, with outstanding long-term PM2.5 recycling filtration performance. The hierarchical phase separation-driven 2D nano-networks construction strategy, by virtue of their feasibility and tunability, holds great promise for widespread application across diverse membrane-related domains for air filtration.

Determination of the Σ^{+} Timelike Electromagnetic Form Factors

Based on data samples collected with the BESIII detector at the BEPCII collider, the process e^{+}e^{-}→Σ^{+}Σ[over ¯]^{-} is studied at center-of-mass energies sqrt[s]=2.3960, 2.6454, and 2.9000 GeV. Using a fully differential angular description of the final state particles, both the relative magnitude and phase information of the Σ^{+} electromagnetic form factors in the timelike region are extracted. The relative phase between the electric and magnetic form factors is determined to be sinΔΦ=-0.67±0.29(stat)±0.18(syst) at sqrt[s]=2.3960  GeV, ΔΦ=55°±19°(stat)±14°(syst) at sqrt[s]=2.6454  GeV, and 78°±22°(stat)±9°(syst) at sqrt[s]=2.9000  GeV. For the first time, the phase of the hyperon electromagnetic form factors is explored in a wide range of four-momentum transfer. The evolution of the phase along with four-momentum transfer is an important input for understanding its asymptotic behavior and the dynamics of baryons.

A Breathable Fibrous Membrane with Coaxially Heterogeneous Conductive Networks toward Personal Thermal Management and Electromagnetic Interference Shielding

The expeditious growth of wearable electronic devices has boomed the development of versatile smart textiles for personal health-related applications. In practice, integrated high-performance systems still face challenges of compromised breathability, high cost, and complicated manufacturing processes. Herein, a breathable fibrous membrane with dual-driven heating and electromagnetic interference (EMI) shielding performance is developed through a facile process of electrospinning followed by targeted conformal deposition. The approach constructs a robust hierarchically coaxial heterostructure consisting of elastic polymers as supportive "core" and dual-conductive components of polypyrrole and copper sulfide (CuS) nanosheets as continuous "sheath" at the fiber level. The CuS nanosheets with metal-like electrical conductivity demonstrate the promising potential to substitute the expensive conductive nano-materials with a complex fabricating process. The as-prepared fibrous membrane exhibits high electrical conductivity (70.38 S cm-1 ), exceptional active heating effects, including solar heating (saturation temperature of 69.7 °C at 1 sun) and Joule heating (75.2 °C at 2.9 V), and impressive EMI shielding performance (50.11 dB in the X-band), coupled with favorable air permeability (161.4 mm s-1 at 200 Pa) and efficient water vapor transmittance (118.9 g m-2 h). This work opens up a new avenue to fabricate versatile wearable devices for personal thermal management and health protection.

Full-Color "Off-On" Thermochromic Fluorescent Fibers for Customizable Smart Wearable Displays in Personal Health Monitoring

Responsive thermochromic fiber materials capable of miniaturization and integrating comfortably and compliantly onto the soft and dynamically deforming human body are promising materials for visualized personal health monitoring. However, their development is hindered by monotonous colors, low-contrast color changes, and poor reversibility. Herein, full-color "off-on" thermochromic fluorescent fibers are prepared based on self-crystallinity phase change and Förster resonance energy transfer for long-term and passive body-temperature monitoring, especially for various personalized customization purposes. The off-on switching luminescence characteristic is derived from the reversible conversion of the dispersion state and fluorescent emission by fluorophores and quencher molecules, which are embedded in the matrix of a phase-change material, during the crystallizing/melting processes. The achievement of full-color fluorescence is attributed to the large modulation range of fluorescence colors according to primary color additive theory. These thermochromic fluorescent fibers exhibit good mechanical properties, fluorescent emission contrast, and reversibility, showing their great potential in flexible smart display devices. Moreover, the response temperature of the thermochromic fibers is controllable by adjusting the phase-change material, enabling body-temperature-triggered luminescence; this property highlights their potential for human body-temperature monitoring and personalized customization. This work presents a new strategy for designing and exploring flexible sensors with higher comprehensive performances.

Injectable and self-healable nano-architectured hydrogel for NIR-light responsive chemo- and photothermal bacterial eradication

Hydrogels with multifunctional properties activated at specific times have gained significant attention in the biomedical field. As bacterial infections can cause severe complications that negatively impact wound repair, herein, we present the development of a stimuli-responsive, injectable, and in situ-forming hydrogel with antibacterial, self-healing, and drug-delivery properties. In this study, we prepared a Pluronic F-127 (PF127) and sodium alginate (SA)-based hydrogel that can be targeted to a specific tissue via injection. The PF127/SA hydrogel was incorporated with polymeric short-filaments (SFs) containing an anti-inflammatory drug - ketoprofen, and stimuli-responsive polydopamine (PDA) particles. The hydrogel, after injection, could be in situ gelated at the body temperature, showing great in vitro stability and self-healing ability after 4 h of incubation. The SFs and PDA improved the hydrogel injectability and compressive strength. The introduction of PDA significantly accelerated the KET release under near-infrared light exposure and extended its release validity period. The excellent composites' photo-thermal performance led to antibacterial activity against representative Gram-positive and Gram-negative bacteria, resulting in 99.9% E. coli and S. aureus eradication after 10 min of NIR light irradiation. In vitro, fibroblast L929 cell studies confirmed the materials' biocompatibility and paved the way toward further in vivo and clinical application of the system for chronic wound treatments.

Engineering surgical face masks with photothermal and photodynamic plasmonic nanostructures for enhancing filtration and on-demand pathogen eradication

The shortage of face masks and the lack of antipathogenic functions has been significant since the recent pandemic's inception. Moreover, the disposal of an enormous number of contaminated face masks not only carries a significant environmental impact but also escalates the risk of cross-contamination. This study proposes a strategy to upgrade available surgical masks into antibacterial masks with enhanced particle and bacterial filtration. Plasmonic nanoparticles can provide photodynamic and photothermal functionalities for surgical masks. For this purpose, gold nanorods act as on-demand agents to eliminate pathogens on the surface of the masks upon near-infrared light irradiation. Additionally, the modified masks are furnished with polymer electrospun nanofibrous layers. These electrospun layers can enhance the particle and bacterial filtration efficiency, not at the cost of the pressure drop of the mask. Consequently, fabricating these prototype masks could be a practical approach to upgrading the available masks to alleviate the environmental toll of disposable face masks.

Multiscale Interpenetrated/Interconnected Network Design Confers All-Carbon Aerogels with Unprecedented Thermomechanical Properties for Thermal Insulation under Extreme Environments

With ultralight weight, low thermal conductivity, and extraordinary high-temperature resistance, carbon aerogels hold tremendous potential against severe thermal threats encountered by hypersonic vehicles during the in-orbit operation and re-entry process. However, current 3D aerogels are plagued by irreconcilable contradictions between adiabatic and mechanical performance due to monotonicity of the building blocks or uncontrollable assembly behavior. Herein, a spatially confined assembly strategy of multiscale low-dimensional nanocarbons is reported to decouple the stress and heat transfer. The nanofiber framework, a basis for transferring the loading strain, is covered by a continuous thin-film-like layer formed by the aggregation of nanoparticles, which in combination serve as the fundamental structural units for generating an elastic behavior while yielding compartments in aerogels to suppress the gaseous fluid thermal diffusion within distinct partitions. The resulting all-carbon aerogels with a hierarchical cellular structure and quasi-closed cell walls achieve the best thermomechanical and insulation trade-off, exhibiting flyweight density (24 mg cm-3 ), temperature-constant compressibility (-196-1600 °C), and a low thermal conductivity of 0.04 829 W m-1 K-1 at 300 °C. This strategy provides a remarkable thermal protection material in hostile environments for future aerospace exploration.

Toward Estimating CO2 Solubility in Pure Water and Brine Using Cascade Forward Neural Network and Generalized Regression Neural Network: Application to CO2 Dissolution Trapping in Saline Aquifers

Predicting carbon dioxide (CO2) solubility in water and brine is crucial for understanding carbon capture and storage (CCS) processes. Accurate solubility predictions inform the feasibility and effectiveness of CO2 dissolution trapping, a key mechanism in carbon sequestration in saline aquifers. In this work, a comprehensive data set comprising 1278 experimental solubility data points for CO2-brine systems was assembled, encompassing diverse operating conditions. These data encompassed brines containing six different salts: NaCl, KCl, NaHCO3, CaCl2, MgCl2, and Na2SO4. Also, this databank encompassed temperature spanning from 273.15 to 453.15 K and a pressure range spanning 0.06-100 MPa. To model this solubility databank, cascade forward neural network (CFNN) and generalized regression neural network (GRNN) were employed. Furthermore, three optimization algorithms, namely, Bayesian Regularization (BR), Broyden-Fletcher-Goldfarb-Shanno (BFGS) quasi-Newton, and Levenberg-Marquardt (LM), were applied to enhance the performance of the CFNN models. The CFNN-LM model showcased average absolute percent relative error (AAPRE) values of 5.37% for the overall data set, 5.26% for the training subset, and 5.85% for the testing subset. Overall, the CFNN-LM model stands out as the most accurate among the models crafted in this study, boasting the highest overall R2 value of 0.9949 among the other models. Based on sensitivity analysis, pressure exerts the most significant influence and stands as the sole parameter with a positive impact on CO2 solubility in brine. Conversely, temperature and the concentration of all six salts considered in the model exhibited a negative impact. All salts exert a negative impact on CO2 solubility due to their salting-out effect, with varying degrees of influence. The salting-out effects of the salts can be ranked as follows: from the most pronounced to the least: MgCl2 > CaCl2 > NaCl > KCl > NaHCO3 > Na2SO4. By employing the leverage approach, only a few instances of potential suspected and out-of-leverage data were found. The relatively low count of identified potential suspected and out-of-leverage data, given the expansive solubility database, underscores the reliability and accuracy of both the data set and the CFNN-LM model's performance in this survey.

Controlled Alignment of Carbon Black Nanoparticles in Electrospun Carbon Nanofibers for Flexible Films

Carbon nanofiber (CNF) films or mats have great conductivity and thermal stability and are widely used in different technological processes. Among all the fabrication methods, electrospinning is a simple yet effective technique for preparing CNF mats, but the electrospun CNF mats are often brittle. Here, we report a feasible protocol by which to control the alignment of carbon black nanoparticles (CB NPs) within CNF to enhance the flexibility. The CB NPs (~45 nm) are treated with non-ionic surfactant Triton-X 100 (TX) prior to being blended with a solution containing poly(vinyl butyral) and polyacrylonitrile, followed by electrospinning and then carbonization. The optimized CB-TX@CNF mat has a boosted elongation from 2.25% of pure CNF to 2.49%. On the contrary, the untreated CB loaded in CNF displayed a lower elongation of 1.85% because of the aggregated CB spots created weak joints. The controlled and uniform dispersion of CB NPs helped to scatter the applied bending force in the softness test. This feasible protocol paves the way for using these facile surface-treated CB NPs as a commercial reinforcement for producing flexible CNF films.

First Measurement of the Decay Asymmetry in the Pure W-Boson-Exchange Decay Λ_{c}^{+}→Ξ^{0}K^{+}

Based on 4.4  fb^{-1} of e^{+}e^{-} annihilation data collected at the center-of-mass energies between 4.60 and 4.70 GeV with the BESIII detector at the BEPCII collider, the pure W-boson-exchange decay Λ_{c}^{+}→Ξ^{0}K^{+} is studied with a full angular analysis. The corresponding decay asymmetry is measured for the first time to be α_{Ξ^{0}K^{+}}=0.01±0.16(stat)±0.03(syst). This result reflects the noninterference effect between the S- and P-wave amplitudes. The phase shift between S- and P-wave amplitudes has two solutions, which are δ_{p}-δ_{s}=-1.55±0.25(stat)±0.05(syst)  rad or 1.59±0.25(stat)±0.05(syst)  rad.

Direct synthesis of ultralight, elastic, high-temperature insulation N-doped TiO2 ceramic nanofibrous sponges via conjugate electrospinning

The design of three-dimensional ceramic nanofibrous materials with high-temperature insulation and flame-retardant characteristics is of significant interest due to the effectively improved mechanical properties. However, achieving a pure ceramic monolith with ultra-low density, high elasticity and toughness remains a great challenge. Herein, a low-cost, scalable strategy to fabricate ultralight and mechanically robust N-doped TiO2 ceramic nanofibrous sponges with a continuous stratified structure by conjugate electrospinning is reported. Remarkably, the introduction of dopamine into the precursor nanofibers is engineered, which realizes the nitrogen doping to inhibit the TiO2 grain growth, endowing single nanofibers with a smoother, less defective surface. Besides, the self-polymerization process of dopamine allows the construction of bonding points between nanofibers and optimizes the distribution of inorganic micelles on polymer templates. Moreover, a rotating disk receiving device under different rotating speeds is designed to obtain N-doped TiO2 sponges with various interlamellar spacings, further affecting the maximum compressive deformation capacity. The resulting ceramic sponges, consisting of fluffy crosslinked nanofiber layers, possess low densities of 12-45 mg cm-3, which can quickly recover under a large strain of 80% and have only 9.2% plastic deformation after 100 compression cycles. In addition, the sponge also exhibits a temperature-invariant superelasticity at 25-800 °C and a low heat conductivity of 0.0285 W m-1 K-1, with an outstanding thermal insulation property, making it an ideal insulation material for high-temperature or harsh conditions.

Yolk-shell composite optical sensors with chiral L-histidine/Rhodamine 6G for high-sensitivity "turn-on" detection of L-proline

Chirality is a ubiquitous phenomenon in nature and has attracted wide attention in the biomedicine, pharmaceutics and biosensing research fields. Enantiomeric recognition of chiral compounds, especially chiral drugs and chiral amino acids, is important for human health and nutrition. In this work, through the encapsulation of L-His&R6G (L-His = L-Histidine; R6G = Rhodamine 6G) into MOF@MOF framework ZIF-67@ZIF-8, composited material L-His&R6G@ZIF-67@ZIF-8 can be obtained. Additionally, through the etching process, a unique yolk-shell ZIF-8 chiral composite optical sensors L-His&R6G@ZIF-8 (1) can be successfully prepared. Photo-luminescent (PL) experiment also reveals that 1 can highly sensitively detect L-Proline (L-Pro) through the "turn-on" detection strategy (KBH = 1.22 × 104 M-1 and detection limit 1.9 μM). Further yolk-shell L-His&R6G@ZIF-8-based fabricate flexible mixed-matrix membranes has been prepared using doctor-blading technique, which show significant fluorescence enhancement effect under ultraviolet lamp. This work also provides the unique example of preparing chiral yolk-shell framework composite sensors, which have broad application in chiral sensing area.

Biomimetic Bouligand chiral fibers array enables strong and superelastic ceramic aerogels

Ceramic aerogels are often used when thermal insulation materials are desired; however, they are still plagued by poor mechanical stability under thermal shock. Here, inspired by the dactyl clubs of mantis shrimp found in nature, which form by directed assembly into hierarchical, chiral and Bouligand (twisted plywood) structure exhibiting superior mechanical properties, we present a compositional and structural engineering strategy to develop strong, superelastic and fatigue resistance ceramic aerogels with chiral fibers array resembling Bouligand architecture. Benefiting from the stress dissipation, crack torsion and mechanical reinforcement of micro-/nano-scale Bouligand array, the tensile strength of these aerogels (170.38 MPa) is between one and two orders of magnitude greater than that of state-of-the-art nanofibrous aerogels. In addition, the developed aerogels feature low density and thermal conductivity, good compressive properties with rapid recovery from 80 % strain, and thermal stability up to 1200 °C, making them ideal for thermal insulation applications.

Diphylleia Grayi-Inspired Intelligent Temperature-Responsive Transparent Nanofiber Membranes

Nanofiber membranes (NFMs) have become attractive candidates for next-generation flexible transparent materials due to their exceptional flexibility and breathability. However, improving the transmittance of NFMs is a great challenge due to the enormous reflection and incredibly poor transmission generated by the nanofiber-air interface. In this research, we report a general strategy for the preparation of flexible temperature-responsive transparent (TRT) membranes, which achieves a rapid transformation of NFMs from opaque to highly transparent under a narrow temperature window. In this process, the phase change material eicosane is coated on the surface of the polyurethane nanofibers by electrospray technology. When the temperature rises to 37 °C, eicosane rapidly completes the phase transition and establishes the light transmission path between the nanofibers, preventing light loss from reflection at the nanofiber-air interface. The resulting TRT membrane exhibits high transmittance (> 90%), and fast response (5 s). This study achieves the first TRT transition of NFMs, offering a general strategy for building highly transparent nanofiber materials, shaping the future of next-generation intelligent temperature monitoring, anti-counterfeiting measures, and other high-performance devices.

Sesamin attenuates UVA-induced keratinocyte injury via inhibiting ASK-1-JNK/p38 MAPK pathways

BACKGROUND

Ultraviolet (UV) exposure-stimulated reactive oxygen species (ROS) formation in keratinocytes is a crucial factor in skin aging. Phytochemicals have become widely popular for protecting the skin from UV-induced cell injury. Sesamin (SSM) has been shown to play a role in extensive pharmacological activity and exhibit photoprotective effects.

AIM

To assess the protective effect of SSM on UVA-irradiated keratinocytes and determine its potential antiphotoaging effect.

METHODS

HaCaT keratinocytes pretreated with SSM were exposed to UVA radiation at 8 J/cm2 for 10 min. Cell viability and oxidative stress indicators were evaluated using a cell counting kit-8 and lactate dehydrogenase (LDH), malondialdehyde (MDA), glutathione (GSH), and superoxide dismutase (SOD) assay kits. Apoptosis and intracellular ROS levels were analyzed using annexin V-fluorescein isothiocyanate/propyridine iodide and dichlorodihydrofluorescein diacetate staining, respectively. Protein levels of matrix metalloprotein-1 (MMP-1), MMP-9, Bax/Bcl-2, and mitogen-activated protein kinase (MAPK) pathway proteins, phospho-apoptosis signal-regulating kinase-1 (p-ASK-1)/ASK-1, phospho-c-Jun N-terminal protein kinase (p-JNK)/JNK, and p-p38/p38 were determined using western blotting.

RESULTS

Sesamin showed no cytotoxicity until 160 μmol/L on human keratinocytes. Sesamin pretreatment (20 and 40 μM) reversed the suppressed cell viability, increased LDH release and MDA content, decreased cellular antioxidants GSH and SOD, and elevated intracellular ROS levels, which were induced by UVA irradiation. Additionally, SSM inhibited the expression of Bax, MMP-1, and MMP-9 and stimulated Bcl-2 expression. In terms of the regulatory mechanisms, we demonstrated that SSM inhibits the phosphorylation of ASK-1, JNK, and p38.

CONCLUSION

The results suggest that SSM attenuates UVA-induced keratinocyte injury by inhibiting the ASK-1-JNK/p38 MAPK pathways.

Multiscale Synergetic Bandgap/Structure Engineering in Semiconductor Nanofibrous Aerogels for Enhanced Solar Evaporation

Solar-driven interface evaporation has been identified as a sustainable seawater desalination and water purification technology. Nonetheless, the evaporation performance is still restricted by salt deposition and heat loss owing to weak solar spectrum absorption, tortuous channels, and limited plane area of conventional photothermal material. Herein, the semiconductor nanofibrous aerogels with a narrow bandgap, vertically aligned channels, and a conical architecture are constructed by the multiscale synergetic engineering strategy, encompassing bandgap engineering at the atomic scale and structure engineering at the nano-micro scale. As a proof-of-concept demonstration, a Co-doped MoS2 nanofibrous aerogel is synthesized, which exhibits the entire solar absorption, superhydrophilic, and excellent thermal insulation, achieving a net evaporation rate of 1.62 kg m-2 h-1 under 1 sun irradiation, as well as a synergistically efficient dye ion adsorption function. This work opens up new possibilities for the development of solar evaporators for practical applications in clean water production.

Ultrathin Aerogel Micro/Nanofiber Membranes with Hierarchical Cellular Architecture for High-Performance Warmth Retention

A low temperature environment poses significant challenges to the global economy and public health. However, the existing cold-protective materials still struggle with the trade-off between thickness and thermal resistance, resulting in poor thermal-wet comfort and limited personal cold protection performance. Here, a scalable strategy, based on electrospinning and solution casting, is developed to create aerogel micro/nanofiber membranes with a hierarchical cellular architecture by manipulating the phase separation of the charged jets and of the spreading casting solution. The integration of interconnected nanopores (30-60 nm), ultrafine fiber diameter, and high porosity, enables the aerogel micro/nanofiber membranes with lightweight, ultrathin thickness (∼0.5 mm), and superior warmth retention performance with ultralow thermal conductivity of 14.01 mW m-1 K-1. And the resultant membrane with customized semiclosed walls exhibits both striking wind resistance and satisfactory thermal-wet comfort (3.4 °C warmer than the cutting-edge thermal underwear). This work will inspire the design and development of high-performance fibrous materials for thermal management applications.

Direct Synthesis of Polyimide Curly Nanofibrous Aerogels for High-Performance Thermal Insulation Under Extreme Temperature

Maintaining human body temperature is one of the basic needs for living, which requires high-performance thermal insulation materials to prevent heat exchange with external environment. However, the most widely used fibrous thermal insulation materials always suffer from the heavy weight, weak mechanical property, and moderate capacity to suppress heat transfer, resulting in limited personal cold and thermal protection performance. Here, an ultralight, mechanically robust, and thermally insulating polyimide (PI) aerogel is directly synthesized via constructing 3D interlocked curly nanofibrous networks during electrospinning. Controlling the solution/water molecule interaction enables the rapid phase inversion of charged jets, while the multiple jets are ejected by regulating charge density of the fluids, thus synergistically allowing numerous curly nanofibers to interlock and cross-link with each other to form porous aerogel structure. The resulted PI aerogel integrates the ultralight property with density of 2.4 mg cm-3 , extreme temperature tolerance (mechanical robustness over -196 to 300 °C), and thermal insulation performance with ultralow thermal conductivity of 22.4 mW m-1 K-1 , providing an ideal candidate to keep human thermal comfort under extreme temperature. This work can provide a source of inspiration for the design and development of nanofibrous aerogels for various applications.

Flavor Characteristics of Ten Peanut Varieties from China

To investigate the flavor characteristics of peanuts grown in Jiangsu, China, ten local varieties were selected. The amino acids, 5'-nucleotides and volatile substances were detected, and the flavor and odor characteristics of these varieties were estimated using an electronic tongue and nose. The results showed that the fat and protein contents of ten peanut varieties changed significantly (p < 0.05), and may have been negatively correlated with those of the Taihua 6 variety-in particular, having the highest protein content and the lowest fat content. The amino acid contents of the peanuts were 20.08 g/100 g (Taihua 4)-27.18 g/100 g (Taihua 6). Taihua 6 also contained the highest bitter (10.41 g/100 g) and sweet (6.06 g/100 g) amino acids, and Taihua 10 had the highest monosodium glutamate-like amino acids (7.61 g/100 g). The content of 5'-nucleotides ranged from 0.08 mg/g (Taihua 9725) to 0.14 mg/g (Taihua 0122-601). Additionally, 5'-cytidylate monophosphate (5'-CMP) and 5'-adenosine monophosphate (5'-AMP) were the major 5'-nucleotides detected in the peanuts. A total of 42 kinds of volatile flavor compounds were detected, with both Taihua 4 and 6 showing the most (18 kinds) and the highest content being in Taihua 4 (7.46%). Both Taihua 9725 and 9922 exhibited the fewest kinds (nine kinds) of volatile components, and the lowest content was in Taihua 9725 (3.15%). Formic acid hexyl ester was the most abundant volatile substance in peanuts, and the highest level (3.63%) was detected in Taihua 7506. The electronic tongue and nose indicated that the greatest taste difference among the ten varieties of peanuts was mainly related to sourness, and Taihua 4 and Taihua 9922 had special taste characteristics. On the other hand, the greatest smell difference among the ten varieties of peanuts was mostly for methane and sulfur organic substances, and Taihua 0605-2 had a special and strong smell characteristic. In conclusion, the content and composition differences of the flavor substances of ten peanut varieties were responsible for their divergences in taste and smell. These results will provide guidelines for the further use (freshly consumed or processed) of these ten peanut varieties.

Influence of an Organic Salt-Based Stabilizing Additive on Charge Carrier Dynamics in Triple Cation Perovskite Solar Cells

Besides further improvement in the power conversion efficiency (PCE) of perovskite solar cells (PSC), their long-term stability must also be ensured. Additives such as organic cations with halide counter anions are considered promising candidates to address this challenge, conferring both higher performance and increased stability to perovskite-based devices. Here, a stabilizing additive (N,N-dimethylmethyleneiminium chloride, [Dmmim]Cl) is identified, and its effect on charge carrier mobility and lifetime under thermal stress in triple cation perovskite (Cs0.05 MA0.05 FA0.90 PbI3 ) thin films is investigated. To explore the fundamental mechanisms limiting charge carrier mobility, temperature-dependent microwave conductivity measurements are performed. Different mobility behaviors across two temperature regions are revealed, following the power law Tm , indicating two different dominant scattering mechanisms. The low-temperature region is assigned to charge carrier scattering with polar optical phonons, while a strong decrease in mobility at high temperatures is due to dynamic disorder. The results obtained rationalize the improved stability of the [Dmmim]Cl-doped films and devices compared to the undoped reference samples, by limiting temperature-activated mobile ions and retarding degradation of the perovskite film.

High-Performance Liquid-Repellent and Thermal-Wet Comfortable Membranes Using Triboelectric Nanostructured Nanofiber/Meshes

Skin-like functional membranes with liquid resistance and moisture permeability are in growing demand in various applications. However, the membranes have been facing a long-term dilemma in balancing waterproofness and breathability, as well as resisting internal liquid sweat transport, resulting in poor thermal-wet comfort. Herein, a novel electromeshing technique, based on manipulating the ejection and phase separation of charged liquids, is developed to create triboelectric nanostructured nano-mesh consisting of hydrophobic ferroelectric nanofiber/meshes and hydrophilic nanofiber/meshes. By combining the true nanoscale diameter (≈22 nm), small pore size, and high porosity, high waterproofness (129 kPa) and breathability (3736 g m-2 per day) for the membranes are achieved. Moreover, the membranes can break large water clusters into small water molecules to promote sweat absorption and release by coupling hydrophilic wicking and triboelectric field polarization, exhibiting a satisfactory water evaporation rate (0.64 g h-1 ) and thermal-wet comfort (0.7 °C cooler than the cutting-edge poly(tetrafluoroethylene) protective membranes). This work may shed new light on the design and development of advanced protective textiles.

Electrospinning Photocatalysis Meet In Situ Irradiated XPS: Recent Mechanisms Advances and Challenges

Producing solar fuels over photocatalysts under light irradiation is a considerable way to alleviate energy crises and environmental pollution. To develop the yields of solar fuels, photocatalysts with broad light absorption, fast charge carrier migration, and abundant reaction sites need to be designed. Electrospun 1D nanofibers with large specific areas and high porosity have been widely used in the efficient production of solar fuels. Nevertheless, it is challenging to do in-depth mechanism research on electrospun nanofiber-based photocatalysts since there are multiple charge transfer routes and various reaction sites in these systems. Here, the basic principles of electrospinning and photocatalysis are systemically discussed. Then, the different roles of electrospun nanofibers played in recent research to boost photocatalytic efficiency are highlighted. It is noteworthy that the working principles and main advantages of in situ irradiated photoelectron spectroscopy (ISI-XPS), a new technique to investigate migration routes of charge carriers and identify active sites in electrospun nanofibers based photocatalysts, are summarized for the first time. At last, a brief summary on the future orientation of photocatalysts based on electrospun nanofibers as well as the perspectives on the development of the ISI-XPS technique are also provided.