Copper complexes of anionic nitrogen ligands in the amidation and imidation of aryl halides

Copper(I) imidate and amidate complexes of chelating N,N-donor ligands, which are proposed intermediates in copper-catalyzed amidations of aryl halides, have been synthesized and characterized by X-ray diffraction and detailed solution-phase methods. In some cases, the complexes adopt neutral, three-coordinate trigonal planar structures in the solid state, but in other cases they adopt an ionic form consisting of an L 2Cu (+) cation and a CuX 2 (-) anion. A tetraalkylammonium salt of the CuX 2 (-) anion in which X = phthalimidate was also isolated. Conductivity measurements and (1)H NMR spectra of mixtures of two complexes all indicate that the complexes exist predominantly in the ionic form in DMSO and DMF solutions. One complex was sufficiently soluble for conductance measurements in less polar solvents and was shown to adopt some degree of the ionic form in THF and predominantly the neutral form in benzene. The complexes containing dative nitrogen ligands reacted with iodoarenes and bromoarenes to form products from C-N coupling, but the ammonium salt of [Cu(phth) 2] (-) did not. Similar selectivities for stoichiometric and catalytic reactions with two different iodoarenes and faster rates for the stoichiometric reactions implied that the isolated amidate and imidate complexes are intermediates in the reactions of amides and imides with haloarenes catalyzed by copper complexes containing dative N,N ligands. These amidates and imidates reacted much more slowly with chloroarenes, including chloroarenes that possess more favorable reduction potentials than some bromoarenes and that are known to undergo fast dissociation of chloride from the chloroarene radical anion. The reaction of o-(allyloxy)iodobenzene with [(phen) 2Cu][Cu(pyrr) 2] results in formation of the C-N coupled product in high yield and no detectable amount of the 3-methyl-2,3-dihydrobenzofuran or 3-methylene-2,3-dihydrobenzofuran products that would be expected from a reaction that generated free radicals. These data and computed reaction barriers argue against mechanisms in which the haloarene reacts with a two-coordinate anionic copper species and mechanisms that start with electron transfer to generate a free iodoarene radical anion. Instead, these data are more consistent with mechanisms involving cleavage of the carbon-halogen bond within the coordination sphere of the metal.

Copper(I) Complex O2-Reactivity with a N3S Thioether Ligand: a Copper−Dioxygen Adduct Including Sulfur Ligation, Ligand Oxygenation, and Comparisons with All Nitrogen Ligand Analogues

In order to contribute to an understanding of the effects of thioether sulfur ligation in copper-O(2) reactivity, the tetradentate ligands L(N3S) (2-ethylthio-N,N-bis(pyridin-2-yl)methylethanamine) and L(N3S')(2-ethylthio-N,N-bis(pyridin-2-yl)ethylethanamine) have been synthesized. Corresponding copper(I) complexes, [CuI(L(N3S))]ClO(4) (1-ClO(4)), [CuI(L(N3S))]B(C(6)F(5))(4) (1-B(C(6)F(5))(4)), and [CuI(L(N3S'))]ClO(4) (2), were generated, and their redox properties, CO binding, and O(2)-reactivity were compared to the situation with analogous compounds having all nitrogen donor ligands, [CuI(TMPA)(MeCN)](+) and [Cu(I)(PMAP)](+) (TMPA = tris(2-pyridylmethyl)amine; PMAP = bis[2-(2-pyridyl)ethyl]-(2-pyridyl)methylamine). X-ray structures of 1-B(C(6)F(5))(4), a dimer, and copper(II) complex [Cu(II)(L(N3S))(MeOH)](ClO(4))(2) (3) were obtained; the latter possesses axial thioether coordination. At low temperature in CH(2)Cl(2), acetone, or 2-methyltetrahydrofuran (MeTHF), 1 reacts with O(2) and generates an adduct formulated as an end-on peroxodicopper(II) complex [{Cu(II)(L(N3S))}(2)(mu-1,2-O(2)(2-))](2+) (4)){lambda(max) = 530 (epsilon approximately 9200 M(-1) cm(-1)) and 605 nm (epsilon approximately 11,800 M(-1) cm(-1))}; the number and relative intensity of LMCT UV-vis bands vary from those for [{Cu(II)(TMPA)}(2)(O(2)(2-))](2+) {lambda(max) = 524 nm (epsilon = 11,300 M(-1) cm(-1)) and 615 nm (epsilon = 5800 M(-1) cm(-1))} and are ascribed to electronic structure variation due to coordination geometry changes with the L(N3S) ligand. Resonance Raman spectroscopy confirms the end-on peroxo-formulation {nu(O-O) = 817 cm(-1) (16-18O(2) Delta = 46 cm(-1)) and nu(Cu-O) = 545 cm(-1) (16-18O(2) Delta = 26 cm(-1)); these values are lower in energy than those for [{Cu(II)(TMPA)}(2)(O(2)(2-))](2+) {nu(Cu-O) = 561 cm(-1) and nu(O-O) = 827 cm(-1)} and can be attributed to less electron density donation from the peroxide pi* orbitals to the Cu(II) ion. Complex 4 is the first copper-dioxygen adduct with thioether ligation; direct evidence comes from EXAFS spectroscopy {Cu K-edge; Cu-S = 2.4 Angstrom}. Following a [Cu(I)(L(N3S))](+)/O(2) reaction and warming, the L(N3S) thioether ligand is oxidized to the sulfoxide in a reaction modeling copper monooxygenase activity. By contrast, 2 is unreactive toward dioxygen probably due to its significantly increased Cu(II)/Cu(I) redox potential, an effect of ligand chelate ring size (in comparison to 1). Discussion of the relevance of the chemistry to copper enzyme O(2)-activation, and situations of biological stress involving methionine oxidation, is provided.

Preparation and Structure of a Solid-State Hypervalent-Iodine Polymer Containing Iodine and Oxygen Atoms in Fused 12-Atom Hexagonal Rings

The treatment of dilute aqueous solutions of [hydroxy(tosyloxy)iodo]benzene with aqueous Mg(ClO4)2 produced thin elongated-hexagonal plates exhibiting a supramolecular structure in which tetra-mu-oxopentaiodanyl dication repeat units are joined to each other by significantly ionic bonds and each unit is associated with two perchlorate ions. The linearly extended cationic structure is formed from the 12-atom hexagonal rings of alternating iodine and oxygen atoms, a novel structure. Each 12-membered ring forms a nearly planar hexagonal shape with sides defined by almost linear O-I-O segments (175.7+/-1.6) degrees. The apexes are occupied by bridging oxide ligands where the I-O-I angles deviate only slightly from an ideal 120 degrees hexagonal angle (116.8+/-1.2) degrees, consistent with sp2 hybridization of the bridging oxygen atoms that participate in three-center four-electron bonds with iodine. These 12-atom hexagons are slightly "chair" distorted at the oxygen atoms. The planes of the rings are separated by layers containing the phenyl rings. The perchlorate ions reside in void spaces created by the three-up, three-down arrangement of the phenyl rings around each 12-membered I-O ring and are positioned directly above and below the I-O rings.

Palladium-Catalyzed Asymmetric Phosphination. Scope, Mechanism, and Origin of Enantioselectivity

Asymmetric cross-coupling of aryl iodides (ArI) with secondary arylphosphines (PHMe(Ar'), Ar' = (2,4,6)-R3C6H2; R = i-Pr (Is), Me (Mes), Ph (Phes)) in the presence of the base NaOSiMe3 and a chiral Pd catalyst precursor, such as Pd((R,R)-Me-Duphos)(trans-stilbene), gave the tertiary phosphines PMe(Ar')(Ar) in enantioenriched form. Sterically demanding secondary phosphine substituents (Ar') and aryl iodides with electron-donating para substituents resulted in the highest enantiomeric excess, up to 88%. Phosphination of ortho-substituted aryl iodides required a Pd(Et-FerroTANE) catalyst but gave low enantioselectivity. Observations during catalysis and stoichiometric studies of the individual steps suggested a mechanism for the cross-coupling of PhI and PHMe(Is) (1) initiated by oxidative addition to Pd(0) yielding Pd((R,R)-Me-Duphos)(Ph)(I) (3). Reversible displacement of iodide by PHMe(Is) gave the cation [Pd((R,R)-Me-Duphos)(Ph)(PHMe(Is))][I] (4), which was isolated as the triflate salt and crystallographically characterized. Deprotonation of 4-OTf with NaOSiMe3 gave the phosphido complex Pd((R,R)-Me-Duphos)(Ph)(PMeIs) (5); an equilibrium between its diastereomers was observed by low-temperature NMR spectroscopy. Reductive elimination of 5 yielded different products depending on the conditions. In the absence of a trap, the unstable three-coordinate phosphine complex Pd((R,R)-Me-Duphos)(PMeIs(Ph)) (6) was formed. Decomposition of 5 in the presence of PhI gave PMeIs(Ph) (2) and regenerated 3, while trapping with phosphine 1 during catalysis gave Pd((R,R)-Me-Duphos)(PHMe(Is))2 (7), which reacted with PhI to give 3. Deprotonation of 1:1 or 1.4:1 mixtures of cations 4-OTf gave the same 6:1 ratio of enantiomers of PMeIs(Ph) (2), suggesting that the rate of P inversion in 5 was greater than or equal to the rate of reductive elimination. Kinetic studies of the first-order reductive elimination of 5 were consistent with a Curtin-Hammett-Winstein-Holness (CHWH) scheme, in which pyramidal inversion at the phosphido ligand was much faster than P-C bond formation. The absolute configuration of the phosphine (SP)-PMeIs(p-MeOC6H4) was determined crystallographically; NMR studies and comparison to the stable complex 5-Pt were consistent with an RP-phosphido ligand in the major diastereomer of the intermediate Pd((R,R)-Me-Duphos)(Ph)(PMeIs) (5). Therefore, the favored enantiomer of phosphine 2 appeared to be formed from the major diastereomer of phosphido intermediate 5, although the minor intermediate diastereomer underwent P-C bond formation about three times more rapidly. The effects of the diphosphine ligand, the phosphido substituents, and the aryl group on the ratio of diastereomers of the phosphido intermediates Pd(diphos*)(Ar)(PMeAr'), their rates of reductive elimination, and the formation of three-coordinate complexes were probed by low-temperature 31P NMR spectroscopy; the results were also consistent with the CHWH scheme.

Calorimetric, spectroscopic, and model studies provide insight into the transport of Ti(IV) by human serum transferrin

Evidence suggests that transferrin can bind Ti(IV) in an unhydrolyzed form (without bound hydroxide or oxide) or in a hydrolyzed form. Ti(IV) coordination by N,N'-di(o-hydroxybenzyl)ethylenediamine-N,N'-diacetic acid (HBED) at different pH values models the two forms of Ti(IV)-loaded transferrin spectrally and structurally. 13C NMR and stopped-flow kinetic experiments reveal that when the metal is delivered to the protein using an unhydrolyzed source, Ti(IV) can coordinate in the typical distorted octahedral environment with a bound synergistic anion. The crystal structure of TiHBED obtained at low pH models this type of coordination. The solution structure of the complex compares favorably with the solid state from pH 3.0 to 4.0, and the complex can be reduced with E1/2 = -641 mV vs NHE. Kinetic and thermodynamic competition studies at pH 3.0 reveal that Ti(citrate)3 reacts with HBED via a dissociative mechanism and that the stability of TiHBED (log beta = 34.024) is weaker than that of the Fe(III) complex. pH stability studies show that Ti(IV) hydrolyzes ligand waters at higher pH but still remains bound to HBED until pH 9.5. Similarly, at a pH greater than 8.0 the synergistic anion that binds Ti(IV) in transferrin is readily displaced by irreversible metal hydrolysis although the metal remains bound to the protein until pH 9.5. Thermal denaturation studies conducted optically and by differential scanning calorimetry reveal that Ti(IV)-bound transferrin experiences only minimal enhanced thermal stability unlike when Fe(III) is bound. The C- and N-lobe transition Tm values shift to a few degrees higher. The stability, competition, and redox studies performed provide insight into the possible mechanism of Ti2-Tf transport in cells.

Organometallic Chemistry of Amidate Complexes. Accelerating Effect of Bidentate Ligands on the Reductive Elimination ofN-Aryl Amidates from Palladium(II)

We report a series of arylpalladium complexes of acetamidate, sulfonamidate, and deprotonated oxazolidinone ligands that undergo reductive elimination with rates and yields that depend on the binding mode of the ancillary and amidate ligands. Complexes of the acetamidate ligands containing the bidentate phosphines DPPF and Xantphos as ancillary ligands undergo reductive elimination. The rate and yield were higher from the complex ligated by Xantphos, which contains a larger bite angle. In contrast, the analogous amidate complex containing a single sterically hindered monodentate ligand and a kappa2-bound amidate ligand does not undergo reductive elimination. This trend of faster reductive elimination from complexes containing bidentate ancillary ligands than from a complex with a single monodentate ancillary ligand is unusual and is consistent with an effect of the denticity of the ancillary ligand on the binding mode of the amidate. Complexes of sulfonamidate ligands underwent reductive elimination faster than complexes of acetamidates, and reductive elimination occurred from complexes containing both bidentate and monodentate ancillary ligands. Like reductive elimination from the acetamidate complexes, reductive eliminations from the sulfonamidate complexes were faster when the complexes possessed bidentate Xantphos and kappa1-sulfonamidate ligands.

Molecular Recognition in the Selective Oxygenation of Saturated C-H Bonds by a Dimanganese Catalyst

Although enzymes often incorporate molecular recognition elements to orient substrates selectively, such strategies are rarely achieved by synthetic catalysts. We combined molecular recognition through hydrogen bonding with C-H activation to obtain high-turnover catalytic regioselective functionalization of sp3 C-H bonds remote from the -COOH recognition group. The catalyst contains a Mn(mu-O)2Mn reactive center and a ligand based on Kemp's triacid that directs a -COOH group to anchor the carboxylic acid group of the substrate and thus modify the usual selectivity for oxidation. Control experiments supported the role of hydrogen bonding in orienting the substrate to achieve high selectivity.

Carbon−Oxygen Bond Formation between a Terminal Alkoxo Ligand and a Coordinated Olefin. Evidence for Olefin Insertion into a Rhodium Alkoxide

Preparation and reactivity of a series of bis(phosphine) rhodium(I) alkoxides stabilized by intramolecular olefin coordination are reported. {Rh(PEt3)2[kappa1:eta2-OCRR'(CH2)nCH=CH2]} (n = 1, 2) were prepared via alcoholysis of {Rh(PEt3)2[N(SiMe3)2]} by the corresponding alcohols HOCRR'(CH2)nCH=CH2. The in situ generated {Rh(PEt3)2[kappa1:eta2-OCRR'(CH2)2CH=CH2]} were not stable at ambient temperatures and decomposed in the presence of added PEt3 to afford 2,2-disubstituted-5-methylenetetrahydrofurans and [(PEt3)4Rh-H] in good to high yields. Kinetic and deuterium labeling results support a syn-oxyrhodation pathway via direct olefin insertion into a Rh-O bond, followed by rapid beta-hydride elimination. In comparison, {Rh(PEt3)2[kappa1:eta2-OCRR'CH2CH=CH2]} are isolated as stable crystals, and the Rh-olefin interactions are evidenced by an X-ray structure. Heating of these complexes generated [Rh(PEt3)2(eta2-allyl)] and the corresponding ketones in high yields following an apparent beta-allyl elimination pathway.

Toward Exceeding the Shockley−Queisser Limit: Photoinduced Interfacial Charge Transfer Processes that Store Energy in Excess of the Equilibrated Excited State

Nanocrystalline (anatase), mesoporous TiO2 thin films were functionalized with [Ru(bpy)2(deebq)](PF6)2, [Ru(bq)2(deeb)](PF6)2, [Ru(deebq)2(bpy)](PF6)2, [Ru(bpy)(deebq)(NCS)2], or [Os(bpy)2(deebq)](PF6)2, where bpy is 2,2'-bipyridine, bq is 2,2'-biquinoline, and deeb and deebq are 4,4'-diethylester derivatives. These compounds bind to the nanocrystalline TiO2 films in their carboxylate forms with limiting surface coverages of 8 (+/- 2) x 10(-8) mol/cm2. Electrochemical measurements show that the first reduction of these compounds (-0.70 V vs SCE) occurs prior to TiO2 reduction. Steady state illumination in the presence of the sacrificial electron donor triethylamine leads to the appearance of the reduced sensitizer. The thermally equilibrated metal-to-ligand charge-transfer excited state and the reduced form of these compounds do not inject electrons into TiO2. Nanosecond transient absorption measurements demonstrate the formation of an extremely long-lived charge separated state based on equal concentrations of the reduced and oxidized compounds. The results are consistent with a mechanism of ultrafast excited-state injection into TiO2 followed by interfacial electron transfer to a ground-state compound. The quantum yield for this process was found to increase with excitation energy, a behavior attributed to stronger overlap between the excited sensitizer and the semiconductor acceptor states. For example, the quantum yields for [Os(bpy)2(dcbq)]/TiO2 were phi(417 nm) = 0.18 +/- 0.02, phi(532.5 nm) = 0.08 +/- 0.02, and phi(683 nm) = 0.05 +/- 0.01. Electron transfer to yield ground-state products occurs by lateral intermolecular charge transfer. The driving force for charge recombination was in excess of that stored in the photoluminescent excited state. Chronoabsorption measurements indicate that ligand-based intermolecular electron transfer was an order of magnitude faster than metal-centered intermolecular hole transfer. Charge recombination was quantified with the Kohlrausch-Williams-Watts model.

Direct Observation of β-Aryl Eliminations from Rh(I) Alkoxides

beta-Aryl eliminations from a series of rhodium(I) alkoxides to form rhodium aryl complexes and free ketones are reported. Tertiary phenylmethoxide complexes [Rh(PEt3)n(OCPhRR')] (n = 2, 3) were prepared via alcoholysis of {Rh(PEt3)2[N(SiMe3)2} by the corresponding alcohols HOCPhRR' in the presence and absence of added PEt3. Heating of these complexes in the presence of added PEt3 generated the rhodium phenyl complex, (PEt3)3RhPh, and the corresponding ketones in good to high yields. Kinetic results are most consistent with irreversible beta-phenyl elimination from a bisphosphine-ligated rhodium alkoxide complex. Such bisphosphine complexes result from ligand dissociation from the trisphosphine complexes and have been isolated in some cases. The bisphosphine complexes are stabilized by Rh-Cphenyl interactions, as evidenced by an X-ray structure, and this structure with a metal-aryl interaction likely illustrates the pathway for C-C bond cleavage.

Isothiazolopyridones: synthesis, structure, and biological activity of a new class of antibacterial agents

We report the syntheses of first-generation derivatives of isothiazolopyridones and their in vitro evaluation as antibacterial agents. These compounds, containing a novel heterocyclic nucleus composed of an isothiazolone fused to a quinolizin-4-one (at C-2 and C-3 of the quinolizin-4-one), were prepared using a sequence of seven synthetic transformations. The solid-state structure of 7-chloro-9-ethyl-1-thia-2,4a-diazacyclopenta[b]naphthalene-3,4-dione was determined by X-ray diffraction. The prepared derivatives of desfluoroisothiazolopyridones exhibited (a) antibacterial activity against Gram-negative and Gram-positive organisms, (b) inhibitory activities against DNA gyrase and topoisomerase IV, and (c) no inhibitory activity against human topoisomerase II.

Aqueous Spectroscopy and Redox Properties of Carboxylate-Bound Titanium

The aqueous chemistry of Ti(III) and Ti(IV) in two different chemical environments is investigated given its relevance to environmental, materials, and biological chemistry. Complexes of titanium with the carboxylate ligands citrate and oxalate, found ubiquitously in Nature, were synthesized. The redox properties were studied by using cyclic voltammetry. All the titanium citrate redox couples are quasi-reversible. Electrospray mass spectrometry of the Ti(III) citrate solution shows the presence of a 1:2 Ti/cit complex in solution, in contrast to the predominant 1:3 Ti/cit complex with Ti(IV). The change in the coordination of the ligand to the metal on reduction may explain the quasi-reversible behavior of the electrochemistry. The redox potentials for Ti(IV) citrate in water vary with pH. At pH 7, the approximate E(1/2) is less than -800 mV. This stated change in redox properties is considered in light of the previously reported Ti(IV) citrate solution speciation. Analogous speciation behavior is suggested from the EPR spectroscopy of Ti(III) citrate aqueous solutions. The g tensors are deduced for several pH-dependent species from the simulated data. The X-ray crystal structure of a Ti(III)(2) oxalate dimer Ti(2)(mu-C(2)O(4))(C(2)O(4))(2)(H(2)O)(6).2H(2)O (3), which crystallizes from water below pH 2, is reported. Complex 3 crystallizes in a monoclinic P2(1)/c space group with a = 9.5088(19) Angstroms, b = 6.2382(12) Angstroms, c = 13.494(3) Angstroms, V = 797.8(3) Angstroms(3), and Z = 2. The infrared spectroscopy, EPR spectroscopy, and cyclic voltammetry on complex 3 are reported. The cyclic voltammetry shows an irreversible redox couple approximately -196 mV which likely corresponds to the Ti(IV)(2)/Ti(III)Ti(IV) couple. The EPR spectroscopy on solid complex 3 shows a typical S = 1 triplet-state spectrum. The solid follows non-Curie behavior, and the antiferromagnetic coupling between the two metal centers is determined to be -37.2 cm(-1). However, in solution the complex follows Curie behavior and supports a Ti(III)Ti(IV) oxidation state for the dimer.

A Highly Active Palladium Catalyst for Intermolecular Hydroamination. Factors that Control Reactivity and Additions of Functionalized Anilines to Dienes and Vinylarenes

We report a catalyst for intermolecular hydroamination of vinylarenes that is substantially more active for this process than catalysts published previously. With this more reactive catalyst, we demonstrate that additions of amines to vinylarenes and dienes occur in the presence of potentially reactive functional groups, such as ketones with enolizable hydrogens, free alcohols, free carboxylic acids, free amides, nitriles, and esters. The catalyst for these reactions is generated from [Pd(eta(3)-allyl)Cl](2) (with or without added AgOTf) or [Pd(CH(3)CN)(4)](BF(4))(2) and Xantphos (9,9-dimethyl-4,5-bis(diphenylphosphino)xanthene), which generates complexes with large P-Pd-P bite angles. Studies on the rate of the C-N bond-forming step that occurs by attack of amine on an eta(3)-phenethyl and an eta(3)-allyl complex were conducted to determine the effect of the bite angle on the rate of this nucleophilic attack. Studies on model eta(3)-benzyl complexes containing various bisphosphines showed that the nucleophilic attack was faster for complexes containing larger P-Pd-P bite angles. Studies of substituted unsymmetrical and unsubstituted symmetrical model eta(3)-allyl complexes showed that nucleophilic attack on complexes ligated by Xantphos was faster than on complexes bearing ligands with smaller bite angles and that nucleophilic attack on unsymmetrical allyl complexes with larger bite angle ligands was faster than on unsymmetrical allyl complexes with smaller bite angle ligands. However, monitoring of catalytic reactions of dienes by (31)P NMR spectroscopy showed that the concentration of active catalyst was the major factor that controlled rates for reactions of symmetrical dienes catalyzed by complexes of phosphines with smaller bite angles. The identity of the counterion also affected the rate of attack: reactions of allylpalladium complexes with chloride counterion occurred faster than reactions of allylpalladium complexes with triflate or tetrafluoroborate counterion. As is often observed, the dynamics of the allyl and benzyl complexes also depended on the identity of the counterion.