Lithium Diisopropylamide: Nonequilibrium Kinetics and Lessons Learned about Rate Limitation

The kinetics of lithium diisopropylamide (LDA) in tetrahydrofuran under nonequilibrium conditions are reviewed. These conditions correspond to a class of substrates in which the rates of LDA aggregation and solvation events are comparable to the rates at which various fleeting intermediates react with substrate. Substrates displaying these reactivities, by coincidence, happen to be those that react at tractable rates on laboratory time scales at -78 °C. In this strange region of nonlimiting behavior, rate-limiting steps are often poorly defined, sometimes involve deaggregation, and at other times include reaction with substrate. Changes in conditions routinely cause shifts in the rate-limiting steps, and autocatalysis is prevalent and can be acute. The studies are described in three distinct portions: (1) methods and strategies used to deconvolute complex reaction pathways, (2) the resulting conclusions about organolithium reaction mechanisms, and (3) perspectives on the concept of rate limitation reinforced by studies of LDA in tetrahydrofuran at -78 °C under nonequilibrium conditions.

Lithium Hexamethyldisilazide-Mediated Enolization of Acylated Oxazolidinones: Solvent, Cosolvent, and Isotope Effects on Competing Monomer- and Dimer-Based Pathways

Lithium hexamethyldisilazide (LiHMDS)-mediated enolization of (+)-4-benzyl-3-propionyl-2-oxazolidinone in THF-hydrocarbon mixtures shows unusual sensitivity to the choice of hydrocarbon cosolvent (hexane versus toluene) and to isotopic labeling. Four mechanisms corresponding to monosolvated monomers, trisolvated dimers, octasolvated monomers, and octasolvated dimers were identified. Even under conditions in which the LiHMDS monomer was the dominant observable form, dimer-based metalation was significant. The mechanism-dependent isotope and cosolvent effects are discussed in the context of ground-state stabilization and transition-state tunneling.

Lithium Enolates in the Enantioselective Construction of Tetrasubstituted Carbon Centers with Chiral Lithium Amides as Noncovalent Stereodirecting Auxiliaries

Lithium enolates derived from carboxylic acids are ubiquitous intermediates in organic synthesis. Asymmetric transformations with these intermediates, a central goal of organic synthesis, are typically carried out with covalently attached chiral auxiliaries. An alternative approach is to utilize chiral reagents that form discrete, well-defined aggregates with lithium enolates, providing a chiral environment conducive of asymmetric bond formation. These reagents effectively act as noncovalent, or traceless, chiral auxiliaries. Lithium amides are an obvious choice for such reagents as they are known to form mixed aggregates with lithium enolates. We demonstrate here that mixed aggregates can effect highly enantioselective transformations of lithium enolates in several classes of reactions, most notably in transformations forming tetrasubstituted and quaternary carbon centers. Easy recovery of the chiral reagent by aqueous extraction is another practical advantage of this one-step protocol. Crystallographic, spectroscopic, and computational studies of the central reactive aggregate, which provide insight into the origins of selectivity, are also reported.

Sodium Diisopropylamide in N,N-Dimethylethylamine: Reactivity, Selectivity, and Synthetic Utility

The reactivities and chemoselectivities of sodium diisopropylamide (NaDA) in N,N-dimethylethylamine (DMEA) are compared with those of lithium diisopropylamide (LDA) in tetrahydrofuran (THF). Metalations of arenes, epoxides, ketones, hydrazones, dienes, and alkyl and vinyl halides are represented. The positive attributes of NaDA-DMEA include high solubility, stability, resistance to solvent decomposition, and ease of preparation. The high reactivities and chemoselectivities often complement those of LDA-THF.

Lithium Enolates Derived from Weinreb Amides: Insights into Five-Membered Chelate Rings

Enolization of O-methyl hydroxamic acids (Weinreb amides) in tetrahydrofuran solution with lithium diisopropylamide affords predominantly tetrameric enolates. Aryl substituents on the enolates promote deaggregation. The aggregation states are assigned by using the method of continuous variation in conjunction with 6Li NMR spectroscopy. Decoalescence of the tetramer resonance below -100 °C shows considerable spectral complexity attributed to isomerism of the methoxy-based chelates. Density functional theory calculations were used to examine the consequences of the bite angle of five-membered chelates in cubic tetramers and resulting solvation numbers that were higher than anticipated.

Lithium Enolates Derived from Pyroglutaminol: Mechanism and Stereoselectivity of an Azaaldol Addition

A lithium enolate derived from an acetonide-protected pyroglutaminol undergoes a highly selective azaaldol addition with (E)-N-phenyl-1-[2-(trifluoromethyl)phenyl]methanimine. The selectivity is sensitive to tetrahydrofuran (THF) concentration, temperature, and the presence of excess lithium diisopropylamide base. Rate studies show that the observable tetrasolvated dimeric enolate undergoes reversible deaggregation, with the reaction proceeding via a disolvated-monomer-based transition structure. Limited stereochemical erosion stems from the intervention of a trisolvated-monomer-based pathway, which is suppressed at low THF concentrations and elevated temperature. Endofacial selectivity observed with excess lithium diisopropylamide (LDA) is traced to an intermediate dianion formed by subsequent lithiation of the monomeric azaaldol adduct, which is characterized as both a dilithio form and a trilithio dianion-LDA mixed aggregate.

Mixed Aggregates of the Dilithiated Koga Tetraamine: NMR Spectroscopic and Computational Studies

A combination of (1) H, (6) Li, (13) C, and (15) N NMR spectroscopies and density functional theory computations explores the formation of mixed aggregates by a dilithium salt of a C2 -symmetric chiral tetraamine (Koga's base). Lithium halides, acetylides, alkoxides, and monoalkylamides form isostructural trilithiated mixed aggregates with few exceptions. (6) Li-(13) C and (6) Li-(15) N couplings reveal heretofore undetected transannular contacts (laddering) with lithium acetylides and lithium monoalkylamides. Marked temperature-dependent (15) N chemical shifts seem to be associated with this laddering. Computational studies shed light on the general structures of the aggregates, their penchant for laddering, and the stereochemical consequences of aggregation.

Lithium Enolates Derived from Pyroglutaminol: Aggregation, Solvation, and Atropisomerism

Lithium enolates derived from protected pyroglutaminols were characterized by using (6)Li, (13)C, and (19)F NMR spectroscopies in conjunction with the method of continuous variations. Mixtures of tetrasolvated dimers and tetrasolvated tetramers in different proportions depend on the steric demands of the hemiaminal protecting group, tetrahydrofuran concentration, and the presence or absence of an α-fluoro moiety. The high steric demands of the substituted bicyclo[3.3.0] ring system promote dimers to an unusual extent and allow solvents and atropisomers in cubic tetramers to be observed in the slow-exchange limit. Pyridine used as a (6)Li chemical shift reagent proved useful in assigning solvation numbers.

Structure-Reactivity Relationships in Lithiated Evans Enolates: Influence of Aggregation and Solvation on the Stereochemistry and Mechanism of Aldol Additions

Aldol additions to isobutyraldehyde and cyclohexanone with lithium enolates derived from acylated oxazolidinones (Evans enolates) are described. Previously characterized trisolvated dimeric enolates undergo rapid addition to isobutyraldehyde to give a 12:1 syn:syn selectivity in high yield along with small amounts of one anti isomer. The efficacy of the addition depends critically on aging effects and the reaction quench. Unsolvated tetrameric enolates that form on warming the solutions are unreactive toward isobutyraldehyde and undergo retroaldol reaction under forcing conditions. Additions to cyclohexanone are relatively slow but form a single isomeric adduct in >80% yield. The ketone-derived aldolates are robust. All attempts to control stereoselectivity by controlling aggregation failed. Rate studies of addition to cyclohexanone trace the lack of aggregation-dependent selectivities to a monomer-based mechanism. The synthetic implications and possible utility of lithium enolates in Evans aldol additions are discussed.

Solid-State and Solution Structures of Glycinimine-Derived Lithium Enolates

A combination of crystallographic, spectroscopic, and computational studies was applied to study the structures of lithium enolates derived from glycinimines of benzophenone and (+)-camphor. The solvents examined included toluene and toluene containing various concentrations of tetrahydrofuran, N,N,N',N'-tetramethylethylenediamine (TMEDA), (R,R)-N,N,N',N'-tetramethylcyclohexanediamine [(R,R)-TMCDA], and (S,S)-N,N,N',N'-tetramethylcyclohexanediamine [(S,S)-TMCDA]. Crystal structures show chelated monomers, symmetric disolvated dimers, S4-symmetric tetramers, and both S6- and D3d-symmetric hexamers. (6)Li NMR spectroscopic studies in conjunction with the method of continuous variations show how these species distribute in solution. Density functional theory computations offer insights into experimentally elusive details.

Evans Enolates: Solution Structures of Lithiated Oxazolidinone-Derived Enolates

The results of a combination of (6)Li and (13)C NMR spectroscopic and computational studies of oxazolidinone-based lithium enolates-Evans enolates-in tetrahydrofuran (THF) solution revealed a mixture of dimers, tetramers, and oligomers (possibly ladders). The distribution depended on the structure of the oxazolidinone auxiliary, substituent on the enolate, and THF concentration (in THF/toluene mixtures). The unsolvated tetrameric form contained a D(2d)-symmetric core structure, whereas the dimers were determined experimentally and computationally to be trisolvates with several isomeric forms.

Mechanism of Lithium Diisopropylamide-Mediated Ortholithiation of 1,4-Bis(trifluoromethyl)benzene under Nonequilibrium Conditions: Condition-Dependent Rate Limitation and Lithium Chloride-Catalyzed Inhibition

Lithiation of 1,4-bis(trifluoromethyl)benzene with lithium diisopropylamide in tetrahydrofuran at -78 °C occurs under conditions at which the rates of aggregate exchanges are comparable to the rates of metalation. Under such nonequilibrium conditions, a substantial number of barriers compete to be rate limiting, making the reaction sensitive to trace impurities (LiCl), reactant concentrations, and isotopic substitution. Rate studies using the perdeuterated arene reveal odd effects of LiCl, including catalyzed rate acceleration at lower temperature and catalyzed rate inhibition at higher temperatures. The catalytic effects are accompanied by corresponding changes in the rate law. A kinetic model is presented that captures the critical features of the LiCl catalysis, focusing on the influence of LiCl-catalyzed re-aggregation of the fleeting monomer that can reside above, at, or below the equilibrium population without catalyst.

Lithium diisopropylamide-mediated lithiation of 1,4-difluorobenzene under nonequilibrium conditions: role of monomer-, dimer-, and tetramer-based intermediates and lessons about rate limitation

Lithiation of 1,4-difluorobenzene with lithium diisopropylamide (LDA) in THF at -78 °C joins the ranks of a growing number of metalations that occur under conditions in which the rates of aggregate exchanges are comparable to the rates of metalation. As such, a substantial number of barriers vie for rate limitation. Rate studies reveal that rate-limiting steps and even the choice of reaction coordinate depend on subtle variations in concentration. Deuteration shifts the rate-limiting step and markedly alters the concentration dependencies and overall rate law. This narrative is less about ortholithiation per se and more about rate limitation and the dynamics of LDA aggregate exchange.

Preferential geminal bis-silylation of 3,4-benzothiophane is caused by the dominance of electron withdrawal by R3Si over steric shielding effects

Benzylic C–H lithiation of 3,4-benzothiophane and subsequent treatment with triphenyl- or trimethylchlorosilane under a variety of conditions leads to α,α- rather than α,α′-bis-silylation products as a consequence of anion stabilization by R₃Si and very fast deprotonation of the intermediate monosilylated product, even with a sterically bulky base such as lithium diisopropylamide.

Method of continuous variation: characterization of alkali metal enolates using ¹H and ¹⁹F NMR spectroscopies

The method of continuous variation in conjunction with (1)H and (19)F NMR spectroscopies was used to characterize lithium and sodium enolates solvated by N,N,N',N'-tetramethylethyldiamine (TMEDA) and tetrahydrofuran (THF). A strategy developed using lithium enolates was then applied to the more challenging sodium enolates. A number of sodium enolates solvated by TMEDA or THF afford exclusively tetramers. Evidence suggests that TMEDA chelates sodium on cubic tetramers.

Solution structures of lithium amino alkoxides used in highly enantioselective 1,2-additions

Lithium ephedrates and norcarane-derived lithium amino alkoxides used to effect highly enantioselective 1,2-additions on large scales have been characterized in toluene and tetrahydrofuran. The method of continuous variations in conjunction with (6)Li NMR spectroscopy reveals that the lithium amino alkoxides are tetrameric. In each case, low-temperature (6)Li NMR spectra show stereoisomerically pure homoaggregates displaying resonances consistent with an S4-symmetric cubic core rather than the alternative D2d core. These assignments are supported by density functional theory computations and conform to X-ray crystal structures. Slow aggregate exchanges are discussed in the context of amino alkoxides as chiral auxiliaries.

Enediolate-dilithium amide mixed aggregates in the enantioselective alkylation of arylacetic acids: structural studies and a stereochemical model

A combination of X-ray crystallography, (6)Li, (15)N, and (13)C NMR spectroscopies, and density functional theory computations affords insight into the structures and reactivities of intervening aggregates underlying highly selective asymmetric alkylations of carboxylic acid dianions (enediolates) mediated by the dilithium salt of a C2-symmetric chiral tetraamine. Crystallography shows a trilithiated n-butyllithium-dilithiated amide that has dimerized to a hexalithiated form. Spectroscopic studies implicate the non-dimerized trilithiated mixed aggregate. Reaction of the dilithiated amide with the dilithium enediolate derived from phenylacetic acid affords a tetralithio aggregate comprised of the two dianions in solution and the dimerized octalithio form in the solid state. Computational studies shed light on the details of the solution structures and afford a highly predictive stereochemical model.

Method of continuous variations: applications of job plots to the study of molecular associations in organometallic chemistry

Applications of the method of continuous variations (MCV or the Method of Job) to problems of interest to organometallic chemists are described. MCV provides qualitative and quantitative insights into the stoichiometries underlying association of m molecules of A and n molecules of B to form A(m)B(n) . Applications to complex ensembles probe associations that form metal clusters and aggregates. Job plots in which reaction rates are monitored provide relative stoichiometries in rate-limiting transition structures. In a specialized variant, ligand- or solvent-dependent reaction rates are dissected into contributions in both the ground states and transition states, which affords insights into the full reaction coordinate from a single Job plot. Gaps in the literature are identified and critiqued.

Structure determination using the method of continuous variation: lithium phenolates solvated by protic and dipolar aprotic ligands

The method of continuous variation (MCV) was used in conjunction with (6)Li NMR spectroscopy to characterize four lithium phenolates solvated by a range of solvents, including N,N,N',N'-tetramethylethylenediamine, Et2O, pyridine, protic amines, alcohols, and highly dipolar aprotic solvents. Dimers, trimers, and tetramers were observed, depending on the precise lithium phenolate-solvent combinations. Competition experiments (solvent swaps) provide insights into the relative propensities toward mixed solvation.

Azaaldol condensation of a lithium enolate solvated by N,N,N',N'-tetramethylethylenediamine: dimer-based 1,2-addition to imines

The lithium enolate of tert-amylacetate solvated by N,N,N',N'-tetramethylethylenediamine (TMEDA) is shown to be a doubly chelated dimer. Adding the dimeric enolate to 4-fluorobenzaldehyde-N-phenylimine affords an N-lithiated β-amino ester shown to be monomeric using (6)Li and (15)N NMR spectroscopies. Rate studies using (19)F NMR spectroscopy reveal reaction orders consistent with a transition structure of stoichiometry [(ROLi)2(TMEDA)2(imine)](‡). Density functional theory computations explore several possible dimer-based transition structures with monodentate and bidentate coordination of TMEDA. Supporting rate studies using trans-N,N,N',N'-1,2-tetramethylcyclohexanediamine showing analogous rates and rate law suggest that TMEDA is fully chelated.

Lithium diisopropylamide-mediated ortholithiation of 2-fluoropyridines: rates, mechanisms, and the role of autocatalysis

Lithium diisopropylamide (LDA)-mediated ortholithiations of 2-fluoropyridine and 2,6-difluoropyridine in tetrahydrofuran at -78 °C were studied using a combination of IR and NMR spectroscopic and computational methods. Rate studies show that a substrate-assisted deaggregation of LDA dimer occurs parallel to an unprecedented tetramer-based pathway. Standard and competitive isotope effects confirm post-rate-limiting proton transfer. Autocatalysis stems from ArLi-catalyzed deaggregation of LDA proceeding via 2:2 LDA-ArLi mixed tetramers. A hypersensitivity of the ortholithiation rates to traces of LiCl derives from LiCl-catalyzed LDA dimer-monomer exchange and a subsequent monomer-based ortholithiation. Fleeting 2:2 LDA-LiCl mixed tetramers are suggested to be key intermediates. The mechanisms of both the uncatalyzed and catalyzed deaggregations are discussed. A general mechanistic paradigm is delineated to explain a number of seemingly disparate LDA-mediated reactions, all of which occur in tetrahydrofuran at -78 °C.

Computational studies of lithium diisopropylamide deaggregation

Density functional theory computations [MP2/6-31G(d)//B3LYP/6-31G(d)] on the deaggregation of lithium diisopropylamide (LDA) dimer solvated by two tetrahydrofuran ligands to give the corresponding trisolvated monomer show eight structurally distinct minima. The barriers to exchange are comparable to those expected from experimental studies showing rate-limiting deaggregations. The role of conformational isomerism in deaggregation and the extent that deaggregation rates dictate LDA reactivity under synthetically important conditions are considered.

Regioselective lithium diisopropylamide-mediated ortholithiation of 1-chloro-3-(trifluoromethyl)benzene: role of autocatalysis, lithium chloride catalysis, and reversibility

Ortholithiation of 1-chloro-3-(trifluoromethyl)benzene with lithium diisopropylamide (LDA) in tetrahydrofuran at -78 °C displays characteristics of reactions in which aggregation events are rate limiting. Metalation with lithium-chloride-free LDA involves a rate-limiting deaggregation via dimer-based transition structures. The post-rate-limiting proton transfers are suggested to involve highly solvated triple ions. Autocatalysis by the resulting aryllithiums or catalysis by traces (<100 ppm) of LiCl diverts the reaction through di- and trisolvated monomer-based pathways for metalation at the 2 and 6 positions, respectively. The regiochemistry is dictated by a combination of kinetically controlled metalations overlaid by an equilibration involving diisopropylamine that is shown to occur by the microscopic reverse of the monomer-based metalations.