Antibacterial and Bonding Properties of Universal Adhesive Dental Polymers Doped with Pyrogallol

This study investigated the antibacterial activity, bond strength to dentin (SBS), and ultra-morphology of the polymer-dentin interface of experimental adhesive systems doped with pyrogallol (PY), which is a ubiquitous phenolic moiety that is present in flavonoids and polyphenols. A universal adhesive containing 4-META and 10-MDP was used in this study. PY behaves as an antioxidant and anti-cancerogenic agent and it was incorporated into the adhesive at different concentrations (0.5 and 1 wt.%). The antibacterial activity and SBS were analyzed and the results were statistically analyzed. The ultra-morphology of the polymer-dentin interface was assessed using scanning electron microscopy (SEM). At 24 h, a lower antibacterial activity was observed for the control adhesive compared to those with 0.5% and 1% PY. No difference was seen in SBS between the three groups at 24 h. After 6 months, the SBS of the 0.5% PY adhesive was significantly lower than the other tested adhesives. The specimens created with 1% PY adhesive presented a higher bond strength at six months compared with that found at 24 h. No morphological differences were found at the polymer-dentin interfaces of the tested adhesives. Pyrogallol may be incorporated into modern universal adhesive systems to preserve the polymer-dentin bonding interface and confer a certain degree of antibacterial activity.

Bond Strength of Universal Adhesives to Dentin: A Systematic Review and Meta-Analysis

Currently, the availability of a wide variety of universal adhesives makes it difficult for clinicians to choose the correct system for specific bonding situations to dentin substrate. This study aimed to determine whether there are any alternative techniques or additional strategies available to enhance the bond strength of universal adhesives to dentin through a systematic review and meta-analysis. Two reviewers executed a literature search up to September 2020 in four electronic databases: PubMed, ISI Web of Science, Scopus, and EMBASE. Only in vitro studies that reported the dentin bond strength of universal adhesives using additional strategies were included. An analysis was carried out using Review Manager Software version 5.3.5 (The Nordic Cochrane Centre, The Cochrane Collaboration, Copenhagen, Denmark). The methodological quality of each in vitro study was assessed according to the parameters of a previous systematic. A total of 5671 potentially relevant studies were identified. After title and abstract examination, 74 studies remained in systematic review. From these, a total of 61 studies were included in the meta-analysis. The bond strength of universal adhesives to dentin was improved by the use of one of the following techniques: Previous application of matrix metalloproteinases (MMP) inhibitors (p < 0.001), prolonged application time (p = 0.007), scrubbing technique (p < 0.001), selective dentin etching (p < 0.001), non-atmospheric plasma (p = 0.01), ethanol-wet bonding (p < 0.01), prolonged blowing time (p = 0.02), multiple layer application (p = 0.005), prolonged curing time (p = 0.006), and hydrophobic layer coating (p < 0.001). On the other hand, the use of a shortened application time (p = 0.006), and dentin desensitizers (p = 0.01) impaired the bond strength of universal adhesives to dentin. Most of the analyses performed showed a high heterogenicity. The in vitro evidence suggests that the application of universal adhesives using some alternative techniques or additional strategies may be beneficial for improving their bonding performance to dentin. This research received no external funding. Considering that this systematic review was carried out only with in vitro studies, registration was not performed.

Perceived Preparedness of Dental Academic Institutions to Cope with the COVID-19 Pandemic: A Multi-Country Survey

Dental academic institutions are affected by COVID-19. We assessed the perceived COVID-19 preparedness of these institutions and the characteristics of institutions with greater perceived preparedness. An international cross-sectional survey of dental academics was conducted from March to August 2020 to assess academics’ and institutional attributes, perceived preparedness, and availability of infection prevention and control (IPC) equipment. Principal component analysis (PCA) identified perceived preparedness components. Multilevel linear regression analysis assessed the association between perceived preparedness and fixed effect factors (academics’ and institutions’ attributes) with countries as random effect variable. Of the 1820 dental academics from 28 countries, 78.4% worked in public institutions and 75.2% reported temporary closure. PCA showed five components: clinic apparel, measures before and after patient care, institutional policies, and availability of IPC equipment. Significantly less perceived preparedness was reported in lower-middle income (LMICs) (B = −1.31, p = 0.006) and upper-middle income (UMICs) (B = −0.98, p = 0.02) countries than in high-income countries (HICs), in teaching only (B = −0.55, p < 0.0001) and in research only (B = −1.22, p = 0.003) than teaching and research institutions and in institutions receiving ≤100 patients daily than those receiving >100 patients (B = −0.38, p < 0.0001). More perceived preparedness was reported by academics with administrative roles (B = 0.59, p < 0.0001). Academics from low-income countries (LICs) and LMICs reported less availability of clinic apparel, IPC equipment, measures before patient care, and institutional policies but more measures during patient care. There was greater perceived preparedness in HICs and institutions with greater involvement in teaching, research, and patient care.

Microscopic and chemical evaluation of the filling quality of five obturation techniques in oval-shaped root canals

OBJECTIVES

The aim of this study was to assess the filling quality of five obturation techniques in oval-shaped root canals.

MATERIALS AND METHODS

A total of 212 mandibular first molars with one distal oval canal were selected. Distal canals, shaped with WaveOne Gold Primary, were randomly divided in five groups (n = 40) for obturation: continuous wave condensation, GuttaCore, Thermafil, single cone with AH plus, and single cone with BioRoot RCS. The proportions of gutta-percha-filled areas (GPFA), sealer-filled areas (SFA), void areas (VA), and the sealer/gutta tags into dentinal tubules at 4 mm and 2 mm from the apex were analyzed by an optical numeric microscope, SEM, and energy-dispersive X-ray (EDX). Data were then compared by Kruskal-Wallis one-way ANOVA on ranks (α = 0.05).

RESULTS

At 4 mm, a statistically significant higher GPFA and lower SFA were observed in the GuttaCore and Thermafil groups compared with the 3 other groups. A statistically significant lower VA was observed in the continuous wave condensation, GuttaCore, and Thermafil groups than in the two single-cone groups. At 2 mm, there were a statistically significant higher GPFA and lower SFA and VA in GuttaCore and Thermafil groups than in the 3 other groups. At the two levels investigated, the presence of gutta-percha tags was clearly demonstrated for GuttaCore and Thermafil groups; no tags were observed in the 3 other groups.

CONCLUSIONS

Obturation quality was overall improved in GuttaCore and Thermafil groups.

CLINICAL RELEVANCE

Carrier-based techniques may significantly improve the filling quality compared to continuous wave condensation and single-cone technique. The single-cone technique might have inherent limitations especially in oval root canals regardless of the sealer used.

Knowledge of dental academics about the COVID-19 pandemic: a multi-country online survey

BACKGROUND

COVID-19 is a global pandemic affecting all aspects of life in all countries. We assessed COVID-19 knowledge and associated factors among dental academics in 26 countries.

METHODS

We invited dental academics to participate in a cross-sectional, multi-country, online survey from March to April 2020. The survey collected data on knowledge of COVID-19 regarding the mode of transmission, symptoms, diagnosis, treatment, protection, and dental treatment precautions as well as participants' background variables. Multilevel linear models were used to assess the association between dental academics' knowledge of COVID-19 and individual level (personal and professional) and country-level (number of COVID-19 cases/ million population) factors accounting for random variation among countries.

RESULTS

Two thousand forty-five academics participated in the survey (response rate 14.3%, with 54.7% female and 67% younger than 46 years of age). The mean (SD) knowledge percent score was 73.2 (11.2) %, and the score of knowledge of symptoms was significantly lower than the score of knowledge of diagnostic methods (53.1 and 85.4%, P <  0.0001). Knowledge score was significantly higher among those living with a partner/spouse than among those living alone (regression coefficient (B) = 0.48); higher among those with PhD degrees than among those with Bachelor of Dental Science degrees (B = 0.48); higher among those seeing 21 to 30 patients daily than among those seeing no patients (B = 0.65); and higher among those from countries with a higher number of COVID-19 cases/million population (B = 0.0007).

CONCLUSIONS

Dental academics had poorer knowledge of COVID-19 symptoms than of COVID-19 diagnostic methods. Living arrangements, academic degrees, patient load, and magnitude of the epidemic in the country were associated with COVD-19 knowledge among dental academics. Training of dental academics on COVID-19 can be designed using these findings to recruit those with the greatest need.

In Vitro Evaluation of Different Irrigation Protocols on Intracanal Smear Layer Removal in Teeth with or without Pre-Endodontic Proximal Wall Restoration

To investigate the influence of pre-endodontic coronal wall restoration on smear layer removal during different root canal irrigation strategies, single-root premolars were prepared with a mesio-occlusal cavity. Half were left untreated (G1), while the mesial walls of the remaining half were reconstructed using a resin composite (G2). The specimens were divided into control (ctrl) groups, which used the conventional needle irrigation method, and four experimental subgroups according to irrigation strategy: Sonic activation using the Endoactivator, sonic activation using the EQ-S, mechanical activation using the XP-Endo finisher, and ultrasonic activation using the EndoUltra. Smear layer removal was assessed through SEM and the results were statistically analyzed. At the coronal and middle thirds, no significant difference (p > 0.05) was detected for G1 and G2, except for the control subgroups (G1ctrl vs G2 ctrl) at the middle third. At the apical third, the smear layer removal was significantly greater for G2 than G1. In G1, both at the middle and apical level, EQ-S and EndoUltra showed greater smear layer removal (p < 0.05) compared to the others G1 subgroups. In G2, at the apical level, the EQ-S and EndoUltra were the most effective in smear layer removal. Pre-endodontic coronal wall restoration may improve the smear layer removal during root canal irrigation.

Does Etching of the Enamel with the Rubbing Technique Promote the Bond Strength of a Universal Adhesive System?

AIM

The aim of this in vitro research was to study the effect of etching by phosphoric acid with rubbing technique on the shear bond strength (SBS) of adhesive universal to enamel.

MATERIALS AND METHODS

Sixty extracted teeth were obtained. Three application methods (self-etch, etch-and-rinse, and etch-and-rinse with rubbing technique) were performed to bond the enamel surfaces by a universal adhesive. After 24 hours of immersion in water at 37°C, the specimens were prepared for the SBS test. Scanning electron microscopy was performed to observe the adhesive-enamel interfaces. Optical numeric microscope was used to observe the failure style. Statistical analyses were done with one-way analysis of variance test.

RESULTS

Statistically significant higher bond strength values were observed for etch-and-rinse mode with rubbing technique (25.98 ± 5.70) MPa then for the etch-and-rinse without rubbing (22.07 ± 5.27) MPa and self-etch modes (9.96 ± 2.98) MPa.

CONCLUSION

Enamel etched by 37% phosphoric acid with rubbing technique for 20 seconds showed an increase in the SBS of the universal adhesive to enamel surfaces. The tags of the adhesive can be presented more efficiently by rubbing the acid before the bonding process, consequently, an optimal interface for the bonding.

CLINICAL SIGNIFICANCE

According to the results of this in vitro study, the selective enamel etching mode with rubbing technique is advisable when using the universal adhesive, as it significantly increased the bond strength of this adhesive to enamel surfaces. The clinician should etch the enamel using phosphoric acid with rubbing technique for 20 seconds to promote the bond strength of the universal adhesive system.

Behavior change due to COVID-19 among dental academics-The theory of planned behavior: Stresses, worries, training, and pandemic severity

OBJECTIVE

COVID-19 pandemic led to major life changes. We assessed the psychological impact of COVID-19 on dental academics globally and on changes in their behaviors.

METHODS

We invited dental academics to complete a cross-sectional, online survey from March to May 2020. The survey was based on the Theory of Planned Behavior (TPB). The survey collected data on participants' stress levels (using the Impact of Event Scale), attitude (fears, and worries because of COVID-19 extracted by Principal Component Analysis (PCA), perceived control (resulting from training on public health emergencies), norms (country-level COVID-19 fatality rate), and personal and professional backgrounds. We used multilevel regression models to assess the association between the study outcome variables (frequent handwashing and avoidance of crowded places) and explanatory variables (stress, attitude, perceived control and norms).

RESULTS

1862 academics from 28 countries participated in the survey (response rate = 11.3%). Of those, 53.4% were female, 32.9% were <46 years old and 9.9% had severe stress. PCA extracted three main factors: fear of infection, worries because of professional responsibilities, and worries because of restricted mobility. These factors had significant dose-dependent association with stress and were significantly associated with more frequent handwashing by dental academics (B = 0.56, 0.33, and 0.34) and avoiding crowded places (B = 0.55, 0.30, and 0.28). Low country fatality rates were significantly associated with more handwashing (B = -2.82) and avoiding crowded places (B = -6.61). Training on public health emergencies was not significantly associated with behavior change (B = -0.01 and -0.11).

CONCLUSIONS

COVID-19 had a considerable psychological impact on dental academics. There was a direct, dose-dependent association between change in behaviors and worries but no association between these changes and training on public health emergencies. More change in behaviors was associated with lower country COVID-19 fatality rates. Fears and stresses were associated with greater adoption of preventive measures against the pandemic.

Effect of etching the coronal dentin with the rubbing technique on the microtensile bond strength of a universal adhesive system

BACKGROUND

The adhesion of composite resins to the dentin substrate is influenced by the treatment of the smear layer. While etch-and-rinse systems require dentin to be conditioned with phosphoric acid, self-etching systems preserve the smear layer by incorporating it into the adhesive layer.

OBJECTIVES

The objective of this study was to evaluate the influence of etching with the rubbing technique on the microtensile bond strength (μTBS) of a universal adhesive to dentin.

MATERIAL AND METHODS

Eighteen extracted teeth were selected. Two etch-and-rinse techniques (with and without rubbing) and a self-etching technique were used to bond the dentin surfaces with a universal adhesive system. After 24 h, the bonded samples were prepared for the μTBS testing. The specimens were loaded with a tensile force at a crosshead speed of 0.5 mm/min until failure. The scanning electron microscope (SEM) analyses were used to reveal the failure modes. The data were statistically analyzed with the one-way analysis of variance (ANOVA) and χ2 tests.

RESULTS

The etch-and-rinse system with rubbing produced significantly lower bond strength (42.11 ±9.26 MPa,) than the etch-and-rinse system without rubbing (47.30 ±8.12 MPa) and significantly higher bond strength than the self-etching system (38.07 ±9.49 MPa).

CONCLUSIONS

Under the conditions of this study, dentin etched with phosphoric acid for 3 s in the etchandrinse mode with the rubbing technique for a universal adhesive system decreases the μTBS of the composite to dentin.

Technical Quality of Root Canal Filling in Preclinical Training at Strasbourg University Using Two Teaching Protocols

Objectives  The aim of this study was to compare two teaching protocols according to the technical quality of root canal therapy (RCT) and the procedural errors occurred in preclinical training.

Materials and Methods  Two different groups of students were concerned. The first one (G1) performed a crown-down technique to shape the root canal systems and cold lateral condensation technique to fill them. The second one (G2) performed a step-down technique without initial manual scouting to shape the root canal systems, and cold hydraulic condensation technique, to fill them. G2 used clinical operative microscope to check the access cavity preparation.

Statistical Analysis  The quality of RCTs and procedural errors were recorded and analyzed using chi-squared test and t -test.

Results  Four hundred sixty-eight root canals from 152 maxillary molars were treated by the G1 students: 46.6% canals were judged as acceptable. Four hundred sixty-nine root canals from 152 mandibular molars were treated by G1: 58.8% canals were judged as acceptable. Five hundred fifteen root canals from 156 maxillary molars were treated by G2 students: 84.1% canals were judged as acceptable. Four hundred ninety-three root canals from 156 mandibular molars were treated by G2: 90.9% canals were judged as acceptable. Among the errors, the incidence of “ledges” and “fractured instruments” was statistically significant in G1 compared with G2, both on maxillary and on mandibular molars.

Conclusions  The molar RCTs performed by G2, who got benefit from the new teaching protocol, resulted in a better quality of root filling and in fewer procedural errors compared with the molar RCTs performed by G1.

Microscopic and Chemical Assessments of the Filling Ability in Oval-Shaped Root Canals Using Two Different Carrier-Based Filling Techniques

Objectives The aim of this study was to assess the filling ability in oval-shaped canals using two different carrier-based filling techniques.

Materials and Methods Twenty-four human mandibular premolars with one oval canal were selected. Canals were shaped using WaveOne Gold Primary and ProGlider. Samples were divided into two groups and filled as follows: Thermafil and GuttaCore. The proportions of gutta-percha-filled areas (GPFAs), sealer-filled areas (SFAs), and void areas (VA), at 2 and 5 mm, were analyzed using optical numeric microscope, scanning electron microscope, and energy-dispersive X-ray.

Statistical Analysis Data were compared by Kruskal–Wallis one-way analysis of variance on ranks, with statistical significance set at α = 0.05.

Results At 2 and 5 mm distances from the apex, this study discloses no statistically different filling ability for the two techniques. Concerning each sample treated using both filling systems, the presence of tags was visualized. At working length (WL)-5, and WL-2, the maximum tag penetration depth for the GuttaCore group into the dentinal tubules was, respectively, 96 μm and 48 μm, whereas the values in the thermafil group were 109 μm, and 55 μm, respectively.

Conclusions Our results clearly show that Thermafil and GuttaCore can fill oval-shaped canals in appropriate way. Furthermore, we can state that the GuttaCore obturator allows to preserve the same filling ability than Thermafil obturator, in view of the fact that there was no difference, in terms of GPFA, SFA, and VA between the two different carrier-based obturation techniques.

Effectiveness of Etching by Three Acids on the Morphological and Chemical Features of Dentin Tissue

AIM

The purpose of this study was to evaluate the microscopic and chemical effects of phosphoric acid gel, phosphoric acid liquid, and polyacrylic acid application for 15 seconds (s) on coronal dentin.

MATERIALS AND METHODS

Twelve extracted teeth were selected. Three etching acids were used to prepare the dentin surfaces. Scanning electron microscopy (SEM) and X-ray energy dispersive spectroscopy (EDX) were used to analyze the chemical and morphological changes of the dentinal surfaces, including the depth of demineralization. Collected data were statistically analyzed by the one-way analysis of variance test.

RESULTS

Dentin etched with phosphoric acid gel or liquid showed greater peritubular dentin dissolution, including complete removal of the smear layer. In addition, there were many silica particles on the dentin etched by phosphoric acid gel 37%. The dentin that was etched with 25% polyacrylic acid for 15 seconds showed no smear layer removal. Chemical analysis (EDX) showed that dental surfaces etched with phosphoric acid liquid 37% for 15 seconds showed the strongest mineral dissolution at the calcium surface, with a calcium content of 5.25%. On the other hand, EDX analysis of the dental surface etched with 25% polyacrylic acid showed more surface enrichment in calcium (17.19%).

CONCLUSION

Although phosphoric acid (gel or liquid) 37% cleans the dental surface, phosphoric acid gel precipitates silica particles on the etched dentin surface. These particles cannot be removed by rinsing off this acid. The application of polyacrylic acid for 15 seconds does not noticeably demineralized dentin, nor remove the smear layer.

CLINICAL SIGNIFICANCE

The clinician should use phosphoric acid (gel or liquid) to clean dental surfaces to prepare them for the bonding process. The low demineralizing effects of the polyacrylic acid permits its use near the pulp.

Endodontic Anatomy of Human Mandibular Canines: Three Case Reports

Mandibular canines are usually considered to be single-canal teeth. However, more than one canal and, more rarely, two roots may also occur. Three clinical cases are reported in order to illustrate endodontic anatomical variants in the human mandibular canine. All procedures were performed in conformity with the current state-of-the-art practices in endodontics, which included effective local anaesthesia, rigorous clinical and radiographic pre-access analysis, appropriate tooth restoration to ensure watertight rubber dam installation and surgical microscopic manipulations for precision. The first case involved a mandibular canine with only one root but two canals, including a lateral canal. The second case was a retreatment of a mandibular canine with two roots, two canals and a broken stainless steel K-File in the buccal canal. The third case involved a mandibular canine that revealed a rare root canal configuration (1-3-1): a Sert and Bayirli's type XVII canal. To avoid missing the presence of any root canals in endodontic treatment, clinicians should have a thorough knowledge of the anatomic variants of the root canal system and should take the necessary time to perform a rigorous pre-access analysis. The systematic use of a surgical microscope and ultrasonic endodontic tips facilitates and standardises access cavity preparation and canal localisation.

An In Vivo Study: Location and Instrumentation of the Second Mesiobuccal Canal of the Maxillary Second Molar

AIM

The first purpose of this retrospective observational in vivo study was to determine the incidence of the second mesiobuccal canal (MB2) in maxillary second molars. The second purpose was to propose a modern shaping procedure able to transform a difficult canal, like MB2, into a normal canal.

MATERIALS AND METHODS

This study was led from September 2016 to December 2017, for 15 months. It was conducted on fifty-seven successive cases of root canal therapy on maxillary second molars. All procedures were done in conformity with the current state of the art practices in endodontics. These included rigorous clinical and radiographic pre-access analysis, appropriate tooth restoration to ensure watertight rubber dam installation, surgical microscopic manipulations for precision, the systematic use of ultrasonic endodontic tips to manage the access cavity preparation, and a modern step down technique to shape MB2.

RESULTS

Fifty-seven maxillary second molars were treated: 3.5% had one canal, 7.0% two canals, 24.6% three canals; 64.9% four canals (MB2 presence). Weine's method was used to classify mesiobuccal root canal morphology: 27.4% had a type I canal configuration, 35.3% type II, 37.2% type III canal configuration.

CONCLUSION

The perfect knowledge of endodontic anatomy, a painstaking pre-access analysis of the preoperative radiographs, the systematic identification of the CEJ, using a periodontal probe, the use of surgical microscope coupled with the use of specific endodontic ultrasonic tips and the use of a modern step-down technique allows a high accuracy of the access cavity preparation, canal localization and instrumentation.

CLINICAL SIGNIFICANCE

The rate of MB2 localization and instrumentation on maxillary second molars by our surgical protocol is high. The clinician should take the necessary time to locate and negotiate the MB2. The lack of its location can provoke the failure of endodontic treatment.

Improved single visit management of old infected iatrogenic root perforations using Biodentine®

Aim: The aim of this retrospective observational case series study was to evaluate the middle term outcomes on endodontic management of old infected iatrogenic root perforations using Biodentine. The treatments were always concluded in a single visit, without previous medication with calcium hydroxide. Our goal was to facilitate this kind of treatments and to make them more reproducible and manageable even for a general practitioner or a student. Methodology and methods: Between January 2011 and June 2016, 51 patients with old infected root perforations have been enrolled. All the treatments were performed using Biodentine in a single visit. Infected root perforation repair was performed by supervised dental students (39%) or a qualified endodontist (61%), employing surgical microscope magnification during treatments. After the treatment, the 51 patients were monitored for 18—64 months. We used clinical and radiographic examinations. Results: Of 51 examined teeth, 48 (94%) were classified as healed. The time, the size and the location of the perforations did not have a significant effect on the outcome. We proved the ineffectiveness of the null hypothesis. According to this latter, the single visit treatment of old infected perforations with Biodentine was inadequate. Conclusions: In single visit treatments, Biodentine seems to provide a biocompatible and effective seal in acidic environment, in accidental root perforations, even if the treatment is performed by an inexperienced operator and regardless of the location, the size and the time of occurrence of the perforation.

Root canal treatment of dilacerated second maxillary premolars: Planning the shaping procedure

This article aims at investigating endodontic anatomical variants in the human maxillary premolars allowing the planning of safer and faster shaping procedures. Endodontic literature describes maxillary 2nd premolars as some of the easiest teeth to treat, as they have either one or two straight canals. Rarely they may sometimes have two dilacerated canals. This paper reports two clinical cases of maxillary premolars whose anatomy is quite unusual. In the first case report we describe a maxillary 2nd premolar with a single root and two dilacerated merged canals. The second case report concerns the retreatment of a maxillary 2nd premolar with a single root and two independent dilacerated canals, and even some lateral canal. In dilacerated anatomy, canal scouting step might cause some procedural errors. To avoid these procedural errors, we propose a modern step down technique using at first a rotary NiTi glide path instrument, to go up to the 2/3 of root canal length or until to the first impediment. This would allow an easy apical scouting of the last millimeters of endodont and increase the volume of the irrigants in the apical region. In this way since a safer and faster shaping procedure could be performed.

Key words:Endodontic anatomy, maxillary 2nd premolar, modern step down technique.

[Late onset immunodeficiency with hypo-IgG and hyper-IgM, T CD4+ lymphocytopenia and vitiligo]

The Authors report the clinical case of a patient with a deficit of humoral immunity who developed infections since puberty. The serum levels of IgG and IgA decreased progressively in the fourth decade of life, while serum IgM increased. Moreover, the patient developed a marked CD4+ T lymphocytopenia and a meager B lymphocytopenia, vitiligo, positivity for anti-SSA/Ro autoantibodies and granulomatous phlogosis of the knee. The heterogeneity of the clinical and laboratory data suggests that this patient might present an overlap immunodeficiency syndrome with some of the clinical and immunological features typical of the hyper-IgM syndrome (in the X-linked or autosomal forms) and others that can be referred to a nosologically distinct humoral immunodeficiency such as the common variable immunodeficiency.

Chemiluminescence activity in whole blood phagocytes of dogs naturally infected with Leishmania infantum

Dogs are the domestic reservoir of Leishmania infantum, a vector-borne intracellular protozoan agent of human visceral leishmaniasis. The role of polymorphonuclear leukocytes (PMNs) in the immune defence against this parasite has been poorly studied. We have investigated the function of peripheral blood PMNs in naive beagle dogs that have been naturally exposed to phlebotomine vectors in an area highly endemic for canine leishmaniasis, and found infected by Leishmania at the end of the transmission season. Whole blood phagocyte oxidative metabolism was assessed by a rapid method that determines a luminol-amplified chemiluminescence (CL) emission. This was evaluated using either a soluble stimulant, phorbol mirystate acetate (PMA), or phagocytic stimuli, such as zymosan unopsonized (ZYM) or opsonized with autologous serum (OPZ). In blood samples taken 2 months after exposure to Leishmania transmission, data on CL emission revealed a significant decrease of reactive oxygen intermediates (ROI) production in the presence of both PMA and ZYM, compared with blood samples obtained from dogs before exposure. On the contrary, no variations in CL emission were detected in presence of OPZ. Our data indicate that immunological changes occur early in canine leishmaniasis and confirm that the role of PMNs and their products need to be clarified.

Early suppression of lymphoproliferative response in dogs with natural infection by Leishmania infantum

Dogs are the domestic reservoirs of zoonotic visceral leishmaniasis caused by Leishmania infantum. Early detection of canine infections evolving to clinically patent disease may be important to leishmaniasis control. In this study we firstly investigated the peripheral blood mononuclear cell (PBMC) response to leishmanial antigens and to polyclonal activators concanavalin A, phytohemagglutinin and pokeweed mitogen, of mixed-breed dogs with natural L. infantum infection, either in presymptomatic or in patent disease condition, compared to healthy animals. Leishmania antigens did not induce a clear proliferative response in any of the animals examined. Furthermore, mitogen-induced lymphocyte proliferation was found strongly reduced not only in symptomatic, but also in presymptomatic dogs suggesting that the cell-mediated immunity is suppressed in progressive canine leishmaniasis. To test this finding, naive Beagle dogs were exposed to natural L. infantum infection in a highly endemic area of southern Italy. Two to 10 months after exposure all dogs were found to be infected by Leishmania, and on month 2 of exposure they all showed a significant reduction in PBMC activation by mitogens. Our results indicate that suppression of the lymphoproliferative response is a common occurrence in dogs already at the beginning of an established leishmanial infection.

Functional characteristics of cord blood T lymphocytes after lectin and anti-CD3 stimulation. Differences in the way T cells express activation molecules and proliferate

Newborns are more susceptible than adults to infections, which suggests a relative immaturity of the immune system early after birth. Cord blood T cells differ significantly both in surface phenotype and function from adult T cells. We examined the proliferation and expression of activation molecules by lymphocytes isolated from umbilical cord blood or peripheral blood of adults. The lymphocytes were cultured for 5 days in the presence of phytohemagglutinin, concanavalin A, or anti-CD3 monoclonal antibody. Cord blood T cells expressed the CD45RA molecule, while a low proportion expressed the RO isoform, a marker of primed or activated lymphocytes. Furthermore, more than 95% of neonatal lymphocytes bear the CD38 molecule, but do not express the CD57 molecule. After stimulation by phytohemagglutinin or concanavalin A, the lymphocytes from newborns were activated and proliferated as efficiently as adult T cells. Anti-CD3 did not cause neonatal lymphocytes to proliferate, but these cells expressed activation molecules, such as HLA-DR antigens and the receptor for interleukin-2 and transferrin. The relevance of these findings to tolerance induction in immature cord blood T cells is discussed.

Inhibition of interleukin-1 release and activity by the rat seminal vesicle protein SV-IV

SV-IV, a 9.8-kd protein isolated from rat seminal vesicle secretion, has been shown to have strong non-species-specific immunosuppressive, anti-inflammatory, antithrombotic, and antiphospholipase A2 properties. The present investigation was undertaken to determine the mechanism of action of its immunosuppressive effects. It was found that SV-IV is a potent inhibitor of interleukin-1 (IL-1) release from lipopolysaccharide (LPS)-activated human adherent monocytes and an effective inhibitor of IL-1-induced thymocyte proliferation. The ability of SV-IV to form a noncovalent dimeric association with IL-1 alpha but not with IL-1 beta, its ability to induce a marked decrease of IL-1 binding to its own receptors on the thymocyte surface, and its capacity to bind specifically to the macrophage plasma membrane might play an important role in the molecular mechanism of these inhibitory effects.