Strong antisymmetric spin-orbit coupling and superconducting properties: the case of noncentrosymmetric LaPtSi

In this work we aim to analyze the effect of a strong antisymmetric spin-orbit coupling (ASOC) on the superconductivity of noncentrosymmetric LaPtSi. We study the energy gap structure of polycrystalline LaPtSi by using magnetic penetration depth measurements down to 0.02T _c. We observed a dirty s-wave behavior, which provides compelling evidence that the spin-singlet component of the mixed pairing state is highly dominant. This is consistent with previous results in the sense that the mere presence of a strong ASOC does not lead to unconventional behaviors. Our result also downplays LaPtSi as a good candidate for realizing time-reversal invariant topological superconductivity.

Breakdown of the coherence effects and Fermi liquid behavior in YbAl3 nanoparticles

A change in the Kondo lattice behavior of bulk YbAl₃ has been observed when the alloy is shaped into nanoparticles (≈12 nm). Measurements of the electrical resistivity show inhibited coherence effects and deviation from the standard Fermi liquid behavior (T ²-dependence). These results are interpreted as being due to the effect of the disruption of the periodicity of the array of Kondo ions provoked by the size reduction process. Additionally, the ensemble of randomly placed nanoparticles also triggers an extra source of electronic scattering at very low temperatures (≈15 K) due to quantum interference effects.

Boron-phil and boron-phob structure units in novel borides Ni3Zn2B and Ni2ZnB: experiment and first principles calculations

The crystal structures of two novel borides in the Ni-Zn-B system, τ₅-Ni₃Zn₂B and τ₆-Ni₂ZnB, were determined by single crystal X-ray diffraction (XRSC) in combination with selected area electron diffraction in a transmission electron microscope (SAED-TEM) and electron probe microanalysis (EPMA). Both compounds crystallize in unique structure types (space group C2/m, a = 1.68942(8) nm, b = 0.26332(1) nm, c = 0.61904(3) nm, β = 111.164(2)°, R_F = 0.0219 for Ni₃Zn₂B, and space group C2/m, a = 0.95296(7) nm, b = 0.28371(2) nm, c = 0.59989(1) nm, β = 93.009(4)°, R_F = 0.0163 for Ni₂ZnB). Both compounds have similar building blocks: two triangular prisms centered by boron atoms are arranged along the c-axis separated by Zn layers, which form empty octahedra connecting the boron centered polyhedra. Consistent with the (Ni+Zn)/B ratio, isolated boron atoms are found in τ₅-Ni₃Zn₂B, while B-B pairs exist in τ₆-Ni₂ZnB. The crystal structure of Ni₂ZnB is closely related to that of τ₄-Ni₃ZnB₂, i.e. Ni₂ZnB can be formed by removing the nearly planar nickel layer in Ni₃ZnB₂ and shifting the origin of the unit cell to the center of the B-B pair. The electrical resistivity and specific heat of τ₅-Ni₃Zn₂B reveal the metallic behavior of this compound with an anomaly at low temperature, possibly arising from a Kondo-type interaction. Further analysis on the lattice contribution of the specific heat reveals similarity with τ₄-Ni₃ZnB₂ with some indications of lattice softening in τ₅-Ni₃Zn₂B, which could be related to the increasing metal content and the absence of B-B bonding in τ₅-Ni₃Zn₂B. For the newly found phases, τ₅-Ni₃Zn₂B and τ₆-Ni₂ZnB as well as for τ₃-Ni₂₁Zn₂B₂₀ and τ₄-Ni₃ZnB₂ density functional theory (DFT) calculations were performed by means of the Vienna Ab initio Simulation Package (VASP). Total energies and forces were minimized in order to determine the fully relaxed structural parameters, which agree very well with experiment. Energies of formations in the range of -25.2 to -26.9 kJ mol^-1 were calculated and bulk moduli in the range of 179.7 to 248.9 GPa were derived showing hardening by increasing the B concentration. Charge transfer is discussed in terms of Bader charges resulting in electronic transfer from Zn to the system and electronic charge gain by B. Ni charge contributions vary significantly with crystallographic position depending on B located in the neighbourhood. The electronic structure is presented in terms of densities of states, band structures and contour plots revealing Ni-B and Ni-Zn bonding features.

A Controlled Study of Sorbent Suspension Dialysis in Chronic Liver Disease and Hepatic Encephalopathy

To investigate the role of extracorporeal detoxification in cirrhotic patients with advanced hepatic encephalopathy not responding to medical treatment, 20 patients were randomized to receive six hours of additional sorbent dialysis or ongoing standardized medical treatment. Following treatment, the clinical stage of encephalopathy remained unchanged in both groups. Abnormal sensory evoked potentials improved following sorbent dialysis (N70 latency, 128 ms before versus 110 ms after treatment, P<0,05; cervico-cranial transmission, 7.7 ms versus 6.8 ms, P<0.01) indicating improvement in important aspects of cerebral function. In contrast, brain function remained unchanged following medical treatment (N70 latency, 114 ms versus 113 ms; cervico-cranial transmission, 7.7 ms versus 7.2 ms, P=NS, respectively). Serum benzodiazepine levels decreased significantly after sorbent dialysis but not after medical treatment. Biocompatibility of sorbent dialysis was limited and clinical complications occurred in a proportion of patients. In conclusion, a six-hour treatment with sorbent suspension dialysis did not ameliorate the clinical stage of HE but improved neurophysiologic function in cirrhotic patients who had not responded to conventional medical treatment.

The half Heusler system Ti1+xFe1.33−xSb–TiCoSb with Sb/Sn substitution: phase relations, crystal structures and thermoelectric properties

Phase equilibria for Heusler Phase Ti_1+xFe_1.33−xSb at 800 °C and calculated isosurfaces (ϒ = 0.42) of the electron localization function in TiFe_1.25Sb.

Mechanical properties of non-centrosymmetric CePt3Si and CePt3B

Elastic moduli, hardness (both at room temperature) and thermal expansion (4.2-670 K) have been experimentally determined for polycrystalline CePt₃Si and its prototype compound CePt₃B as well as for single-crystalline CePt₃Si. Resonant ultrasound spectroscopy was used to determine elastic properties (Young's modulus E and Poisson's ratio ν) via the eigenfrequencies of the sample and the knowledge of sample mass and dimensions. Bulk and shear moduli were calculated from E and ν, and the respective Debye temperatures were derived. In addition, ab initio DFT calculations were carried out for both compounds. A comparison of parameters evaluated from DFT with those of experiments revealed, in general, satisfactory agreement. Positive and negative thermal expansion values obtained from CePt₃Si single crystal data are fairly well explained in terms of the crystalline electric field model, using CEF parameters derived recently from inelastic neutron scattering. DFT calculations, in addition, demonstrate that the atomic vibrations keep almost unaffected by the antisymmetric spin-orbit coupling present in systems with crystal structures having no inversion symmetry. This is opposite to electronic properties, where the antisymmetric spin-orbit interaction has shown to distinctly influence features like the superconducting condensate of CePt₃Si.

Structures and processes necessary for providing effective home treatment to severely mentally ill persons: a naturalistic study

BACKGROUND

Home treatment for severely mentally ill persons is becoming increasingly popular. This research aims to identify structures and processes in home treatment that impact on patient-related outcomes.

METHODS

We analysed 17 networks that provide home treatment to severely mentally ill persons using a naturalistic approach. The networks were similar with regard to central components of home treatment such as case management, 24 h crisis hotline and home visits, but differed in all other aspects such as the multidisciplinary teams, time spent with patients, etc. To determine treatment outcome, patients' psychosocial functioning was measured using the Health of the Nation Outcome Scales (HoNOS). Structures and processes were assessed using claims data and questionnaires answered by the different networks. Primary outcome was highlighted by the change in HoNOS scores from the start of home treatment compared with 6 months later. We sought to explain this outcome through patient and network characteristics using regression analysis. Data on 3,567 patients was available.

RESULTS

On average, psychosocial functioning improved by 0.84 across networks between t0 and t1. There were more similarities than differences between the networks with regard to the structures and processes that we tested. A univariate regression analysis found staff's prior experience in mental health care and the effort that they invested in their work correlated positively with patient outcome. This needs to be interpreted under considering that univariate analysis does not show causal relationship. A high case load per case manager, increased and longer patient contact and more family intervention were correlated with worse patient outcome, probably indicating that sicker patients receive more care and intervention.

CONCLUSION

Home treatment networks succeed in delivering care tailored to the needs of patients. In order to improve the quality of care in home treatment, this study suggests employing experienced staff who is ready to invest more effort in their patients. Further research needs to consider a longer follow-up time.

Ba-filled Ni-Sb-Sn based skutterudites with anomalously high lattice thermal conductivity

Novel filled skutterudites BayNi4Sb12-xSnx (ymax = 0.93) have been prepared by arc melting followed by annealing at 250, 350 and 450 °C up to 30 days in vacuum-sealed quartz vials. Extension of the homogeneity region, solidus temperatures and structural investigations were performed for the skutterudite phase in the ternary Ni-Sn-Sb and in the quaternary Ba-Ni-Sb-Sn systems. Phase equilibria in the Ni-Sn-Sb system at 450 °C were established by means of Electron Probe Microanalysis (EPMA) and X-ray Powder Diffraction (XPD). With rather small cages Ni4(Sb,Sn)12, the Ba-Ni-Sn-Sb skutterudite system is perfectly suited to study the influence of filler atoms on the phonon thermal conductivity. Single-phase samples with the composition Ni4Sb8.2Sn3.8, Ba0.42Ni4Sb8.2Sn3.8 and Ba0.92Ni4Sb6.7Sn5.3 were used to measure their physical properties, i.e. temperature dependent electrical resistivity, Seebeck coefficient and thermal conductivity. The resistivity data demonstrate a crossover from metallic to semiconducting behaviour. The corresponding gap width was extracted from the maxima in the Seebeck coefficient data as a function of temperature. Single crystal X-ray structure analyses at 100, 200 and 300 K revealed the thermal expansion coefficients as well as Einstein and Debye temperatures for Ba0.73Ni4Sb8.1Sn3.9 and Ba0.95Ni4Sb6.1Sn5.9. These data were in accordance with the Debye temperatures obtained from the specific heat (4.4 K < T < 140 K) and Mössbauer spectroscopy (10 K < T < 290 K). Rather small atom displacement parameters for the Ba filler atoms indicate a severe reduction in the "rattling behaviour" consistent with the high levels of lattice thermal conductivity. The elastic moduli, collected from Resonant Ultrasonic Spectroscopy ranged from 100 GPa for Ni4Sb8.2Sn3.8 to 116 GPa for Ba0.92Ni4Sb6.7Sn5.3. The thermal expansion coefficients were 11.8 × 10(-6) K(-1) for Ni4Sb8.2Sn3.8 and 13.8 × 10(-6) K(-1) for Ba0.92Ni4Sb6.7Sn5.3. The room temperature Vickers hardness values vary within the range from 2.6 GPa to 4.7 GPa. Severe plastic deformation via high-pressure torsion was used to introduce nanostructuring; however, the physical properties before and after HPT showed no significant effect on the materials thermoelectric behaviour.

Magnetic phase diagram of superantiferromagnetic TbCu₂ nanoparticles

The structural state and static and dynamic magnetic properties of TbCu2 nanoparticles are reported to be produced by mechanical milling under inert atmosphere. The randomly dispersed nanoparticles as detected by TEM retain the bulk symmetry with an orthorhombic Imma lattice and Tb and Cu in the 4e and 8h positions, respectively. Rietveld refinements confirm that the milling produces a controlled reduction of particle sizes reaching ≃6 nm and an increase of the microstrain up to ≃0.6%. The electrical resistivity indicates a metallic behavior and the presence of a magnetic contribution to the electronic scattering which decreases with milling times. The dc-susceptibility shows a reduction of the Néel transition (from 49 K to 43 K) and a progressive increase of a peak (from 9 K to 15 K) in the zero-field-cooled magnetization with size reduction. The exchange anisotropy is very weak (a bias field of ≃30 Oe) and is due to the presence of a disordered (thin) shell coupled to the antiferromagnetic core. The dynamic susceptibility evidences a critical slowing down in the spin-disordered state for the lowest temperature peak associated with a spin glass-like freezing with a tendency of zv and β exponents to increase when the size becomes 6 nm (zv ≃ 6.6 and β ≃ 0.85). A Rietveld analysis of the neutron diffraction patterns 1.8 ≤ T ≤ 60 K, including the magnetic structure determination, reveals that there is a reduction of the expected moment (≃80%), which must be connected to the presence of the disordered particle shell. The core magnetic structure retains the bulk antiferromagnetic arrangement. The overall interpretation is based on a superantiferromagnetic behavior which at low temperatures coexists with a canting of surface moments and a mismatch of the antiferromagnetic sublattices of the nanoparticles. We propose a novel magnetic phase diagram where changes are provoked by a combination of the decrease of size and the increase of microstrain.

Reconstruction of a quadriceps tendon tear using Polyvinylidene fluoride sutures and patellar screw fixation: A biomechanical study

BACKGROUND

Acute quadriceps tendon tears are infrequent injuries requiring surgical treatment. Improved stability after surgical repair may allow for earlier weight-bearing and range of motion. Therefore, a new implant was tested and compared with the "gold standard", using transosseous sutures.

METHODS

Quadriceps tendon tears were constructed using a cadaveric model of 12 fresh matched-pair specimens (aged 61-97; mean age: 82 years). The biomechanical testing compared non-absorbable suture anchors (Polyvinylidene fluoride) versus transosseous absorbable sutures (Polydioxanon). Following anatomic reconstruction, the repaired specimens were loaded until they failed (testing machine: Hounsfield H10KM, Redhill, United Kingdom; maximum force: 1000 N; load speed: 25 mm/min; maximum test length: 150 mm; pre-load: 5 N). Values for load until tear displacement, maximum load until complete failure of the construct (pullout or breakage of the sutures or anchors) and stiffness of the reconstruction were recorded.

RESULTS

The stiffness found in the Polyvinylidene fluoride reconstruction (mean 9.83 N/mm) (standard deviation (SD) 7.75) showed a significant increase compared to the Polydioxanon reconstruction (mean 6.66 N/mm (SD 3.32); P=0.045). Transosseous fixation showed comparable results to the suture anchor system. There was no significant difference found in the maximum load to tear displacement (PVDF: 290.88 N (SD 106.01) vs. PDS: 266.75 N (SD 82.61); P=0.358).

CONCLUSIONS

Using the Polyvinylidene fluoride thread showed comparable results to the established method in reconstruction of ruptured quadriceps tendon. Stiffness of the Polyvinylidene fluoride thread reconstruction was even greater than Polydioxanon thread.

CLINICAL RELEVANCE

Improved stiffness may facilitate healing and is suggested as clinical relevance in reconstruction.

Ba5{V,Nb}12Sb19+x, novel variants of the Ba5Ti12Sb19+x-type: crystal structure and physical properties

The novel compounds Ba5{V,Nb}12Sb19+x, initially found in diffusion zone experiments between Ba-filled skutterudite Ba0.3Co4Sb12 and group V transition metals (V,Nb,Ta), were synthesized via solid state reaction and were characterized by means of X-ray (single crystal and powder) diffraction, electron probe microanalysis (EPMA), and physical (transport and mechanical) properties measurements. Ba5V12Sb19.41 (a = 1.21230(1) nm, space group P4[combining overline]3m; RF(2) = 0.0189) and Ba5Nb12Sb19.14 (a = 1.24979(2) nm, space group P4[combining overline]3m; RF(2) = 0.0219) are the first representatives of the Ba5Ti12Sb19+x-type, however, in contrast to the aristotype, the structure of Ba5V12Sb19.41 shows additional atom disorder. Temperature dependent ADPs and specific heat of Ba5V12Sb19.41 confirmed the rattling behaviour of Ba1,2 and Sb7 atoms within the framework built by V and Sb atoms. Electrical resistivity of both compounds show an upturn at low temperature, and a change from p- to n-type conductivity above 300 K in Ba4.9Nb12Sb19.4. As expected from the complex crystal structure and the presence of defects and disorder, the thermal conductivity is suppressed and lattice thermal conductivity of ∼0.43 W m(-1) K(-1) is near values typical for amorphous systems. Vicker's hardness of (3.8 ± 0.1) GPa (vanadium compound) and (3.5 ± 0.2) GPa (niobium compound) are comparable to Sb-based filled skutterudites. However, the Young's moduli measured by nanoindentation for these compounds EI(Ba4.9V12Sb19.0) = (85 ± 2) GPa and EI(Ba4.9Nb12Sb19.4) = (79 ± 5) GPa are significantly smaller than those of skutterudites, which range from about 130 to 145 GPa.

The significance of caudate volume for age-related associative memory decline

Aging comes along with reduced gray matter (GM) volume in several cerebral areas and with cognitive performance decline in different cognitive domains. Moreover, regional GM volume is linked to specific cognitive sub processes in older adults. However, it remains unclear which regional changes in older individuals are directly associated with decreased cognitive performance. Moreover, most of the studies on this topic focused on hippocampal and prefrontal brain regions and their relation to memory and executive functioning. Interestingly, there are only a few studies that reported an association between striatal brain volume and cognitive performance. This is insofar surprising that striatal structures are (1) highly affected by age and (2) involved in different neural circuits that serve intact cognition. To address these issues, voxel-based morphometry (VBM) was used to analyze GM volume in 18 younger and 18 older adults. Moreover, several neuropsychological tests from different neuropsychological test batteries were applied to assess a broad range of cognitive domains. Older adults showed less GM volume than younger adults within frontal, striatal, and cerebellar brain regions. In the group of older adults, significant correlations were found between striatal GM volume and memory performance and between prefrontal/temporal GM volume and executive functioning. The only direct overlap between brain regions associated with regional atrophy and cognitive performance in older adults was found for the right caudate: older adults showed reduced caudate volume relative to younger adults. Moreover, caudate volume was positively correlated with associative memory accuracy in older adults and older adults showed poorer performances than younger adults in the respective associative memory task. Taken together, the current findings indicate the relevance of the caudate for associative memory decline in the aging brain.

Thermal, magnetic and electronic properties of non-centrosymmetric YbPt₂B

Ternary YbPt2B crystallizes in the non-centrosymmetric hexagonal CePt2B-type structure (space group P6(2)22). Electrical resistivity, specific heat and magnetic measurements reveal a magnetic instability at 5.6 K. Furthermore, a spin-reorientation of presumably a ferromagnetic type occurs around 1.5 K. The behaviour at low temperature is governed by a rather weak Kondo effect, T(K) ⩽ 1 K, in the presence of strong crystalline electric field splitting, with a doublet ground state. Besides, the complex magnetic behaviour presumably results from a Dzyaloshinskii-Moriya interaction triggered by the absence of inversion symmetry in the crystal structure. Scaling according to the de Gennes factor traces back magnetic ordering in YbPt2B to the Rudermann-Kittel-Kasuya-Yoshida (RKKY) interaction and the smooth evolution of the lattice constants and the unit cell volume of REPt2B (RE = rare earths) refers to the 4f(13) electronic configuration of Yb in YbPt2B.

On the constitution and thermodynamic modelling of the system Ti–Ni–Sn

Experimental and calculated phase equilibria for the system Ti–Ni–Sn.

Dent and Flint maize diversity panels reveal important genetic potential for increasing biomass production

Genetic and phenotypic analysis of two complementary maize panels revealed an important variation for biomass yield. Flowering and biomass QTL were discovered by association mapping in both panels. The high whole plant biomass productivity of maize makes it a potential source of energy in animal feeding and biofuel production. The variability and the genetic determinism of traits related to biomass are poorly known. We analyzed two highly diverse panels of Dent and Flint lines representing complementary heterotic groups for Northern Europe. They were genotyped with the 50 k SNP-array and phenotyped as hybrids (crossed to a tester of the complementary pool) in a western European field trial network for traits related to flowering time, plant height, and biomass. The molecular information revealed to be a powerful tool for discovering different levels of structure and relatedness in both panels. This study revealed important variation and potential genetic progress for biomass production, even at constant precocity. Association mapping was run by combining genotypes and phenotypes in a mixed model with a random polygenic effect. This permitted the detection of significant associations, confirming height and flowering time quantitative trait loci (QTL) found in literature. Biomass yield QTL were detected in both panels but were unstable across the environments. Alternative kinship estimator only based on markers unlinked to the tested SNP increased the number of significant associations by around 40% with a satisfying control of the false positive rate. This study gave insights into the variability and the genetic architectures of biomass-related traits in Flint and Dent lines and suggests important potential of these two pools for breeding high biomass yielding hybrid varieties.