2D KBr/Graphene Heterostructures-Influence on Work Function and Friction

The intercalation of graphene is an effective approach to modify the electronic properties of two-dimensional heterostructures for attractive phenomena and applications. In this work, we characterize the growth and surface properties of ionic KBr layers altered by graphene using ultra-high vacuum atomic force microscopy at room temperature. We observed a strong rippling of the KBr islands on Ir(111), which is induced by a specific layer reconstruction but disappears when graphene is introduced in between. The latter causes a consistent change in both the work function and the frictional forces measured by Kelvin probe force microscopy and frictional force microscopy, respectively. Systematic density functional theory calculations of the different systems show that the change in work function is induced by the formation of a surface dipole moment while the friction force is dominated by adhesion forces.

Topographic signatures and manipulations of Fe atoms, CO molecules and NaCl islands on superconducting Pb(111)

Topological superconductivity emerging in one- or two-dimensional hybrid materials is predicted as a key ingredient for quantum computing. However, not only the design of complex heterostructures is primordial for future applications but also the characterization of their electronic and structural properties at the atomic scale using the most advanced scanning probe microscopy techniques with functionalized tips. We report on the topographic signatures observed by scanning tunneling microscopy (STM) of carbon monoxide (CO) molecules, iron (Fe) atoms and sodium chloride (NaCl) islands deposited on superconducting Pb(111). For the CO adsorption a comparison with the Pb(110) substrate is demonstrated. We show a general propensity of these adsorbates to diffuse at low temperature under gentle scanning conditions. Our findings provide new insights into high-resolution probe microscopy imaging with terminated tips, decoupling atoms and molecules by NaCl islands or tip-induced lateral manipulation of iron atoms on top of the prototypical Pb(111) superconducting surface.

Effect of a Nanostructured Titanium Surface on Gingival Cell Adhesion, Viability and Properties against P. gingivalis

OBJECTIVES

The transgingival part of titanium implants is either machined or polished. Cell-surface interactions as a result of nano-modified surfaces could help gingival fibroblast adhesion and support antibacterial properties by means of the physico-mechanical aspects of the surfaces. The aim of the present study was to determine how a nanocavity titanium surface affects the viability and adhesion of human gingival fibroblasts (HGF-1). Additionally, its properties against Porphyromonas gingivalis were tested.

MATERIAL AND METHODS

Two different specimens were evaluated: commercially available machined titanium discs (MD) and nanostructured discs (ND). To obtain ND, machined titanium discs with a diameter of 15 mm were etched with a 1:1 mixture of 98% H₂SO₄ and 30% H₂O₂ (piranha etching) for 5 h at room temperature. Surface topography characterization was performed via scanning electron microscopy (SEM) and atomic force microscopy (AFM). Samples were exposed to HGF-1 to assess the effect on cell viability and adhesion, which were compared between the two groups by means of MTT assay, immunofluorescence and flow cytometry. After incubation with P. gingivalis, antibacterial properties of MD and ND were determined by conventional culturing, live/dead staining and SEM. Results: The present study successfully created a nanostructured surface on commercially available machined titanium discs. The etching process created cavities with a 10-20 nm edge-to-edge diameter. MD and ND show similar adhesion forces equal to about 10-30 nN. The achieved nanostructuration reduced the cell alignment along machining structures and did not negatively affect the proliferation of gingival fibroblasts when compared to MD. No differences in the expression levels of both actin and vinculin proteins, after incubation on MD or ND, were observed. However, the novel ND surface failed to show antibacterial effects against P. gingivalis.

CONCLUSION

Antibacterial effects against P. gingivalis cannot be achieved with nanocavities within a range of 10-20 nm and based on the piranha etching procedure. The proliferation of HGF-1 and the expression levels and localization of the structural proteins actin and vinculin were not influenced by the surface nanostructuration. Further studies on the strength of the gingival cell adhesion should be performed in the future.

CLINICAL RELEVANCE

Since osseointegration is well investigated, mucointegration is an important part of future research and developments. Little is known about how nanostructures on the machined transgingival part of an implant could possibly influence the surrounding tissue. Targeting titanium surfaces with improved antimicrobial properties requires extensive preclinical basic research to gain clinical relevance.

On-Surface Synthesis of Porphyrin-Complex Multi-Block Co-Oligomers by Defluorinative Coupling

On-surface chemical reaction has become a very powerful technique to synthesize nanostructures by linking small molecules in the bottom-up approach. Given the fact that most reactants are simultaneously activated at certain temperatures, a sequential reaction in a controlled way has remained challenging. Here, we present an on-surface synthesis of multi-block co-oligomers from trifluoromethyl (CF₃ ) substituted porphyrin metal complexes. The oligomerization on Au(111) is demonstrated with a combination of bond-resolved scanning probe microscopy and density functional theory (DFT) calculations. Even after the first oligomerization of single monomer unit, the termini of the oligomer keep the CF₃ group, which can be used as a reactant for further coupling in a sequential order. Consequently, copper, cobalt, and palladium complexes of bisanthracene-fused porphyrin oligomers were linked with each other in a designed order.

Exploratory real-time kinetic analysis of the cytotoxicity induced by maize silage mycotoxins in a calf intestinal epithelial cell line

In a temperate climate, the mycotoxins deoxynivalenol (DON), nivalenol (NIV), enniatin B (ENN B), mycophenolic acid (MPA), roquefortine C (ROC) and zearalenone (ZEN) are often found in maize silage. Although rumen microbiota are able to degrade some mycotoxins (e.g. DON), others are known to stay mainly intact (e.g. ROC). In addition, mycotoxin degradation can be hampered by a low ruminal pH or decrease in rumen microbial activity. Hence, these mycotoxins can reach the small intestine and exert a cytotoxic effect on intestinal epithelial cells. In this study, a real-time kinetic analysis of the cytotoxicity of these six mycotoxins and some of their metabolites (α- and β-zearalenol, α- and β-ZOL) was performed in a calf small intestinal epithelial cell line (CIEB). Confluency as well as the cell death parameters apoptosis and necrosis were determined to evaluate the mycotoxin-induced cytotoxicity. A combination of Annexin-V green and Cytotox red staining was used to determine early and late apoptosis as well as necrosis. Six different concentrations were tested ranging from 0.78 to 12.5 μM. Compared to cells not exposed to mycotoxins, DON and NIV exert a fast toxic effect with DON being more toxic than NIV within the first hours of incubation, whereas the inverse was observed at 16 h of incubation. On the other hand, MPA and ZEN induced increased Annexin V green positive cells within several hours of incubation with higher toxicity over time. Increased Annexin V green and Cytotox red positive cells were seen for ROC only at the highest concentration tested. For ENN B, increased Annexin V green positive cells were observed only after 12 h and α- and β-ZOL did not show cytotoxic effects. Hence, mycotoxin exposure causes either severe (DON and NIV) or more limited (ZEN, ROC, MPA, and ENN B) risk of bovine intestinal epithelial damage.

Head-to-Tail Oligomerization by Silylene-Tethered Sonogashira Coupling on Ag(111)

On-surface synthesis is a powerful method for the fabrication of π-conjugated nanomaterials. Herein, we demonstrate chemoselective Sonogashira coupling between (trimethylsilyl)ethynyl and chlorophenyl groups in silylethynyl- and chloro-substituted partially fluorinated phenylene ethynylenes (SiCPFPEs) on Ag(111). The desilylative Sonogashira coupling occurred with high chemoselectivity up to 75 %, while the competing Ullmann and desilylative Glaser homocoupling reactions were suppressed. A combination of bond-resolved scanning tunneling microscopy/atomic force microscopy (STM/AFM) and DFT calculations revealed that the oligomers were obtained by the formation of intermolecular silylene tethers (-Me₂ Si-) through CH₃ -Si bond activation at 130 °C and subsequent elimination of the tethers at an elevated temperature of 200 °C.

Bidirectional reflectance measurement of tungsten samples to assess reflection model in WEST tokamak

This paper presents the measurement of the bidirectional reflectance distribution function of tungsten (W) samples and the resulting reflection models in the nuclear fusion device WEST (tokamak). For this, an experimental gonio-spectrophotometer was developed to fully characterize the material's optical and thermal-radiative properties of metallic samples with different roughnesses. Ray-tracing photonic simulation was then carried out to predict the photon behavior in a fully metallic environment as a function of reflectance measurement. Low emissivity (0.1 at 4 μm) and highly specular reflectance (fitting with a Gaussian distribution around the specular direction with a small width lower than 10°) are found for W samples. These measurements have been used as input for the photonic simulation, and the resulting synthetic image reproduced the reflection features well on the upper divertor, detected in WEST infrared experimental images.

Influence of electrospray deposition on C60 molecular assemblies

Maintaining clean conditions for samples during all steps of preparation and investigation is important for scanning probe studies at the atomic or molecular level. For large or fragile organic molecules, where sublimation cannot be used, high-vacuum electrospray deposition is a good alternative. However, because this method requires the introduction into vacuum of the molecules from solution, clean conditions are more difficult to be maintained. Additionally, because the presence of solvent on the surface cannot be fully eliminated, one has to take care of its possible influence. Here, we compare the high-vacuum electrospray deposition method to thermal evaporation for the preparation of C60 on different surfaces and compare, for sub-monolayer coverages, the influence of the deposition method on the formation of molecular assemblies. Whereas the island location is the main difference for metal surfaces, we observe for alkali halide and metal oxide substrates that the high-vacuum electrospray method can yield single isolated molecules accompanied by surface modifications.

Reconstruction of a 2D layer of KBr on Ir(111) and electromechanical alteration by graphene

A novel reconstruction of a two-dimensional layer of KBr on an Ir(111) surface is observed by high-resolution noncontact atomic force microscopy and verified by density functional theory (DFT). The observed KBr structure is oriented along the main directions of the Ir(111) surface, but forms a characteristic double-line pattern. Comprehensive calculations by DFT, taking into account the observed periodicities, resulted in a new low-energy reconstruction. However, it is fully relaxed into a common cubic structure when a monolayer of graphene is located between substrate and KBr. By using Kelvin probe force microscopy, the work functions of the reconstructed and the cubic configuration of KBr were measured and indicate, in accordance with the DFT calculations, a difference of nearly 900 meV. The difference is due to the strong interaction and local charge displacement of the K+/Br- ions and the Ir(111) surface, which are reduced by the decoupling effect of graphene, thus yielding different electrical and mechanical properties of the top KBr layer.

Detection of osteoarthritis in dogs by metabolic, pro-inflammatory and degenerative synovial fluid biomarkers and traditional radiographic screening: A pilot study

Secondary osteoarthritis (OA) is a slow progressive, common disorder of synovial joints in dogs. It is characterized by a loss of balance between the synthesis and degeneration of articular cartilage components. Its diagnosis is currently based on the presence of clear radiographic changes, which only occur in the later stages of the disease. Hence, early diagnosis of OA remains a major problem. Therefore, interest in synovial fluid (SF) biomarkers has emerged. Besides pro-inflammatory and degenerative markers, i.e. tumor necrosis factor alpha (TNF-alpha), interleukin-1beta (IL-1beta), tenascin-c (TN-C) and matrix metalloproteinase-2 (MMP-2), metabolic parameters, i.e. pH, glucose and lactate, can potentially be used to detect OA. The current study demonstrated statistically significant differences in the SF levels of pH, glucose and lactate between OA-affected and normal joints. In addition, the in-house validated immuno-assays for TNF-alpha, IL-1beta, TN-C and MMP-2 allowed to demonstrate also statistically significant differences in the SF concentrations for all these biomarkers - except TNF-alpha - between OA-affected and normal joints. However, no correlation was found between any of these biomarkers and the currently used radiographic scoring system for OA in dogs. Future research is warranted to explore the potential of these biomarkers in the early detection of OA and in the severity characterization of this disease.

On-Surface Synthesis of Nitrogen-Doped Kagome Graphene

Nitrogen-doped Kagome graphene (N-KG) has been theoretically predicted as a candidate for the emergence of a topological band gap as well as unconventional superconductivity. However, its physical realization still remains very elusive. Here, we report on a substrate-assisted reaction on Ag(111) for the synthesis of two-dimensional graphene sheets possessing a long-range honeycomb Kagome lattice. Low-temperature scanning tunneling microscopy (STM) and atomic force microscopy (AFM) with a CO-terminated tip supported by density functional theory (DFT) are employed to scrutinize the structural and electronic properties of the N-KG down to the atomic scale. We demonstrate its semiconducting character due to the nitrogen doping as well as the emergence of Kagome flat bands near the Fermi level which would open new routes towards the design of graphene-based topological materials.

Rapid and Ultrasensitive Detection of Mutations and Genes Relevant to Antimicrobial Resistance in Bacteria

The worldwide emergence of multidrug-resistant (MDR) bacteria is associated with significant morbidity, mortality, and healthcare costs. Rapid and accurate diagnostic methods to detect antibiotic resistance are critical for antibiotic stewardship and infection control measurements. Here a cantilever nanosensor-based diagnostic assay is shown to detect single nucleotide polymorphisms (SNPs) and genes associated with antibiotic resistance in Gram negative (Pseudomonas aeruginosa) and positive (Enterococcus faecium) bacteria, representing frequent causes for MDR infections. Highly specific RNA capture probes for SNPs (ampRD135G or ampRG154R ) or resistance genes (vanA, vanB, and vanD) allow to detect the binding of bacterial RNA within less than 5 min. Serial dilutions of bacterial RNA indicate an unprecedented sensitivity of 10 fg µL-1 total RNA corresponding to less than ten bacterial cells for SNPs and 1 fg µL-1 total RNA for vanD detection equivalent to single bacterial cell sensitivity.

Serum hyaluronic acid, a marker for improved liver perfusion after gradual surgical attenuation of extrahepatic portosystemic shunt closure in dogs

Current liver function tests used in dogs do not consistently normalise after successful surgical attenuation of portosystemic shunts (PSS). Serum hyaluronic acid (sHA) concentrations in dogs with PSS are reported to be higher at diagnosis than in healthy dogs. The objective of this study was to assess sHA as a marker of liver perfusion by measuring sHA concentrations in dogs before and after gradual surgical attenuation of extrahepatic (EH)PSS and by determining whether sHA concentrations could differentiate closed EHPSS from persistent shunting. Specificity of sHA was assessed by comparing sHA concentrations in dogs with EHPSS to those in dogs with other liver diseases. Twenty dogs with EHPSS had sHA concentrations measured at diagnosis, 1, 3, and 6 months postoperatively. In addition, sHA concentrations were determined in 10 dogs with other liver diseases. At EHPSS diagnosis, median sHA concentration was 335.6 ng/mL (43.0-790.7 ng/mL). All dogs had a significant decrease in sHA concentrations from 1 month postoperatively onwards (P < 0.05), regardless of surgical outcome. At all postoperative follow-up visits, there was a significant difference between the median sHA concentration in dogs with closed EHPSS vs. those with persistent shunting (P < 0.05). Median sHA concentration in dogs with other liver diseases was 89.8 ng/mL (22.9-160.0 ng/mL), which was significantly lower than dogs with EHPSS at diagnosis (P < 0.001). In conclusion, sHA is a promising non-invasive biomarker that can help to determine liver perfusion after surgical attenuation of EHPSS. In addition, sHA could potentially be used to differentiate dogs with EHPSS from dogs with other liver diseases.

Motivational Interviewing for the control of type 2 diabetes mellitus and arterial hypertension

Background

Motivational Interviewing (MI) has been effective in promoting positive changes in various health-related behaviors, including chronic disease management. The main goal of this study was evaluating the effectiveness of this care technology in individual nursing consultations for the control of type 2 Diabetes Mellitus (2DM) and Arterial Hypertension (AH) in primary healthcare.

Methods

Double-blind, controlled, parallel randomized clinical trial conducted in Porto Alegre, Rio Grande do Sul - Brazil, from June 2018 to July 2019. The study subjects suffered from 2DM with associated diagnosis of AH and were randomized individually to the Test/MI Group and Control Group. The Test Group was subjected to an MI-based nursing consultation intervention with a professional who had been trained for 20 hours, while the Control Group received conventional nursing consultation. The variables were collected in order to measure the main glycated hemoglobin and blood pressure outcomes, and for the secondary adherence outcome.

Results

After an average follow-up of 6 months, 175 patients completed the study. There was a significant difference between the groups with improvement in the Test/MI group for the outcomes Systolic Blood Pressure - SBP (p &lt; 0.01), Diastolic Blood Pressure - DBP (p &lt; 0.01), Total Adherence Score in Martín-Bayarre-Grau Questionnaire (p = 0.011) and their dimensions 'Treatment compliance' and 'Personal implication' (p = 0.033; p = 0.031). The blood pressure levels of the patients who received the Motivational Interviewing Intervention showed a significant mean reduction of 15.2 mmHg in SBP and 6.4 mmHg in DBP, compared to the control group. The Test group also showed a significant average intragroup reduction of 0.5% in HbA1c at the completion of the study (p &lt; 0.01).

Conclusions

It is concluded that the MI-based nursing consultation was effective in improving clinical control and adherence in diabetic and hypertensive patients in primary healthcare.

Key messages

MI-based nursing consultation is effective in reducing pressure and glycemic levels in primary healthcare. The MI improves adherence levels in diabetic and hypertensive patients.

Bottom-up Synthesis of Nitrogen-Doped Porous Graphene Nanoribbons

Although methods for a periodic perforation and heteroatom doping of graphene sheets have been developed, patterning closely spaced holes on the nanoscale in graphene nanoribbons is still a challenging task. In this work, nitrogen-doped porous graphene nanoribbons (N-GNRs) were synthesized on Ag(111) using a silver-assisted Ullmann polymerization of brominated tetrabenzophenazine. Insights into the hierarchical reaction pathways from single molecules toward the formation of one-dimensional organometallic complexes and N-GNRs are gained by a combination of scanning tunneling microscopy (STM), atomic force microscopy (AFM) with CO-tip, scanning tunneling spectroscopy (STS), and density functional theory (DFT).