Local CFD kinetic model of cadmium vaporization during fluid bed incineration of municipal solid waste

The emissions of heavy metals during incineration of Municipal Solid Waste (MSW) are a major issue to health and the environment. It is then necessary to well quantify these emissions in order to accomplish an adequate control and prevent the heavy metals from leaving the stacks. In this study the kinetic behavior of Cadmium during Fluidized Bed Incineration (FBI) of artificial MSW pellets, for bed temperatures ranging from 923 to 1073 K, was modeled. FLUENT 12.1.4 was used as the modeling framework for the simulations and implemented together with a complete set of user-defined functions (UDFs). The CFD model combines the combustion of a single solid waste particle with heavy metal (HM) vaporization from the burning particle, and it takes also into account both pyrolysis and volatiles' combustion. A kinetic rate law for the Cd release, derived from the CFD thermal analysis of the combusting particle, is proposed. The simulation results are compared with experimental data obtained in a lab-scale fluidized bed incinerator reported in literature, and with the predicted values from a particulate non-isothermal model, formerly developed by the authors. The comparison shows that the proposed CFD model represents very well the evolution of the HM release for the considered range of bed temperature.

Fractionation of triticale, wheat, barley, oats, canola, and mustard straws for the production of carbohydrates and lignins

Five cereal (triticale, durum wheat, CPS wheat, feed barley, oats) and two oilseed (canola, mustard) straws were fractionated with pressurized low polarity water in a flow-through reactor at 165°C with a flow rate of 115mL/min and a solvent-to-solid ratio of 60mL/g. The conversion and extraction of the major carbohydrates and lignin from the reactor system during hydrothermal treatment was largely completed within the first 20-30min. Glucan content of all straws were enriched by the process. More than 90% of the xylan and nearly 50% of the lignin were extracted and there was no effect on yield due to crop species. However, there were differences in solid residue and liquid extract composition. Cereal crops yielded a residue richer in glucan and lower in lignin. Oilseed crop residues contained very low levels of ash. Xylo-oligosaccharides from oilseed crops contain more acetyl and uronic acid substituents.

Centrality dependence of the charged-particle multiplicity density at midrapidity in Pb-Pb collisions at sqrt[s(NN)] = 2.76 TeV

The centrality dependence of the charged-particle multiplicity density at midrapidity in Pb-Pb collisions at sqrt[s_{NN}]=2.76  TeV is presented. The charged-particle density normalized per participating nucleon pair increases by about a factor of 2 from peripheral (70%-80%) to central (0%-5%) collisions. The centrality dependence is found to be similar to that observed at lower collision energies. The data are compared with models based on different mechanisms for particle production in nuclear collisions.

Optimization of processing conditions for the fractionation of triticale straw using pressurized low polarity water

Pressurized low polarity water (PLPW) fractionation of triticale straw was optimized to maximize hemicellulose and lignin yield, and to produce a cellulose rich fraction for biofuels production. The optimum PLPW conditions for hemicellulose yield was determined to be 165 °C, with a flow rate of 115 mL/min, and a solvent-to-solid ratio of 60 mL/g. Hemicellulose and lignin yield generally increased with increasing temperature and solvent-to-solid ratio. There was a small decrease in hemicellulose yield with an increase in flow rate. Minimum lignin content of the triticale straw residue after extraction was predicted to occur at a processing condition of 206 °C, 160 mL/min, and 67 mL/g. PLPW was successful in removing 73-78% of the hemicellulose, leaving a cellulose rich fraction (65% glucose concentration). Lignin was equally distributed between the solid residues and the extracts and most of the hemicellulose was extracted in oligomer form. Remaining solid residues after fractionation were highly digestible by cellulase enzymes.

Elliptic flow of charged particles in Pb-Pb collisions at sqrt[S(NN)] = 2.76 TeV

We report the first measurement of charged particle elliptic flow in Pb-Pb collisions at sqrt[S(NN)] =2.76 TeV with the ALICE detector at the CERN Large Hadron Collider. The measurement is performed in the central pseudorapidity region (|η|<0.8) and transverse momentum range 0.2<p t<5.0 GeV/c. The elliptic flow signal v₂, measured using the 4-particle correlation method, averaged over transverse momentum and pseudorapidity is 0.087 ± 0.002(stat) ± 0.003(syst) in the 40%-50% centrality class. The differential elliptic flow v₂ p t reaches a maximum of 0.2 near p t =3 GeV/c. Compared to RHIC Au-Au collisions at sqrt[S(NN)] 200 GeV, the elliptic flow increases by about 30%. Some hydrodynamic model predictions which include viscous corrections are in agreement with the observed increase.

Charged-particle multiplicity density at midrapidity in central Pb-Pb collisions at sqrt[S(NN)] = 2.76 TeV

The first measurement of the charged-particle multiplicity density at midrapidity in Pb-Pb collisions at a center-of-mass energy per nucleon pair √ S NN = 2.76 TeV is presented. For an event sample corresponding to the most central 5% of the hadronic cross section, the pseudorapidity density of primary charged particles at midrapidity is 1584 ± 4(stat) ± 76(syst), which corresponds to 8.3 ± 0.4(syst) per participating nucleon pair. This represents an increase of about a factor 1.9 relative to pp collisions at similar collision energies, and about a factor 2.2 to central Au-Au collisions at √ S NN = 2.76 TeV. This measurement provides the first experimental constraint for models of nucleus-nucleus collisions at LHC energies.

Midrapidity antiproton-to-proton ratio in pp collisons at sqrt[s]=0.9 and 7 TeV measured by the ALICE experiment

The ratio of the yields of antiprotons to protons in pp collisions has been measured by the ALICE experiment at sqrt[s]=0.9 and 7 TeV during the initial running periods of the Large Hadron Collider. The measurement covers the transverse momentum interval 0.45<p_{t}<1.05  GeV/c and rapidity |y|<0.5. The ratio is measured to be R_{|y|<0.5}=0.957±0.006(stat)±0.014(syst) at 0.9 TeV and R_{|y|<0.5}=0.991±0.005(stat)±0.014(syst) at 7 TeV and it is independent of both rapidity and transverse momentum. The results are consistent with the conventional model of baryon-number transport and set stringent limits on any additional contributions to baryon-number transfer over very large rapidity intervals in pp collisions.

Extraction and separation of carbohydrates and phenolic compounds in flax shives with pH-controlled pressurized low polarity water

A bench-scale pressurized low polarity water (PLPW) extractor was used for the extraction and separation of hemicellulose, cellulose, lignin, and other phenolic compounds in flax shives. In the first part of this research, the key PLPW extraction process variables of temperature, pH, and flow rate, were optimized using central composite design (CCD). Temperature and pH of water had a significant affect on the fractionation of carbohydrates (cellulose and hemicellulose), lignin, and other phenolics. The optimal extraction conditions for the separation of hemicellulose and lignin, determined by the optimization using CCD, were 170 degrees C, pH 3.0, and a flow rate of 2.5 mL/min. Under these extraction conditions, 39.3% of the initial biomass or feed, 70.1% of the hemicellulose, 35.3% of the lignin, and 5.3% of the cellulose were extracted from the flax shives. In order to improve the purity and yield of the cellulose, a two-stage PLPW extraction was examined. The first stage was designed to remove hemicellulose by water at 170 degrees C and the second stage was intended for delignification by a pH 12 buffer at 220 degrees C. The two-stage PLPW extraction effectively removed 63.2% of the feed, 97.3% of hemicellulose, and 86.3% of lignin, while solubilizing 23.9% of cellulose; resulting in a solid residue containing 0.7 g of hemicellulose, 3.5 g of lignin, and 27.3 g of cellulose/100 g of DFS. The PLPW extraction is able to extract and separate components in flax shives by changing pH and temperature. The best case occurs between pH 9.5 and 12, resulting in maximum solubilization of hemicellulose and lignin.

Effects of pressurized low polarity water extraction parameters on antioxidant properties and composition of cow cockle seed extracts

Antioxidant activity of pressurized low polarity water (PLPW) extracts of cow cockle seed and extraction residues were determined using DPPH, ABTS, and FRAP assays. The effect of extraction conditions (temperature (125, 150 and 175 degrees C) and time) on the antioxidant activity and the relationship amongst the antioxidant activity and extract composition (total phenolics and saponin content) were determined. The antioxidant activity of PLPW extracts increased with extraction temperature. Increasing activity with time was also observed at 175 degrees C. PLPW extraction residues had the highest activity suggesting antioxidant compounds were not completely extracted by PLPW. Antioxidant activity correlated well with total phenolics content of samples (R2>or=0.94), however no correlation was observed with the saponin content. A strong correlation was observed between the antioxidant activity values obtained using different methods (R2>or=0.94). These results point to the potential of PLPW extraction as a method to modify the activity of biological materials for the production of customized extracts.

Biological activities of extracts from sumac (Rhus spp.): a review

Sumac is the common name for a genus (Rhus) that contains over 250 individual species of flowering plants in the family Anacardiaceae. These plants are found in temperate and tropical regions worldwide, often grow in areas of marginal agricultural capacity, and have a long history of use by indigenous people for medicinal and other uses. The research efforts on sumac extracts to date indicate a promising potential for this plant family to provide renewable bioproducts with the following reported desirable bioactivities: antifibrogenic, antifungal, antiinflammatory, antimalarial, antimicrobial, antimutagenic, antioxidant, antithrombin, antitumorigenic, antiviral, cytotoxic, hypoglycaemic, and leukopenic. As well, the bioactive components can be extracted from the plant material using environmentally benign solvents that allow for both food and industrial end-uses. The favorable worldwide distribution of sumac also suggests that desirable bioproducts may be obtained at the source, with minimal transportation requirements from the source through processing to the end consumer. However, previous work has focussed in just a few members of this large plant family. In addition, not all of the species studied to date have been fully characterized for potential bioactive components and bioactivities. Thus, there remains a significant research gap spanning the range from lead chemical discovery through process development and optimization in order to better understand the full potential of the Rhus genus as part of global green technology based on bioproducts and bioprocesses research programs.