Energy Harvester and Cell Proliferation from Biocompatible PMLG Nanofibers Prepared Using Near-Field Electrospinning and Electrospray Technology

This paper describes the application of piezoelectric fibers and films formed using near-field electrospinning (NFES) and electrospray (ESP) technology. Poly(γ-methyl L-glutamate) (PMLG), a biocompatible material, was mixed with poly(ethylene oxide) (PEO) and surfactant to obtain a solution of appropriate viscosity and conductance. Because the orientation of the dipoles in PMLG was enhanced upon applying an electric field, we could use the NFES and ESP processes to align dipoles and enhance the piezoelectric properties of the resulting fibrous materials. The maximum peak voltage of a fiber-based harvester prepared using this approach was 0.056 V. Because the fibers and films were non-toxic biological materials displaying excellent piezoelectric characteristics, we deposited them on glass substrates coated with indium tin oxide to observe their effects on the proliferation of cells. The negative charge of PMLG decreased the proliferation of mouse fibroblast cells (NIH3T3); indeed, decreasing the interspacing between the fibers slightly decreased the proliferation of these cells. Moreover, the migration of the cells was inhibited significantly, or even halted, when the coverage of the ESP films increased, implying a growth inhibition effect.

The effects of electrical stunning voltage on meat quality, plasma parameters, and protein solubility of broiler breast meat

This study was designed to compare the effects of different stunning voltages of pulsed direct current on meat quality of broilers. For this purpose, plasma parameters, blood loss, carcass damage, and meat water holding capacity, color, shear force, pH, and protein solubility were analyzed. A total of 400 broilers were divided into 5 treatment groups and stunned with 5, 15, 25, 35, and 45 V at 750 Hz and 10 s, respectively. Blood samples were collected immediately after cutting the neck. Pectoralis major muscles were removed from the carcass after chilling and placed on ice. Breast muscle pH and meat color were determined at both 2 and 24 h postmortem. Dripping loss, cooking loss, pressing loss, and cooked breast meat shear values were determined after 24 h postmortem. The 5 V treatment significantly increased (P < 0.05) blood plasma corticosterone and lactate concentration compared with the other groups. The carcass damage of wings, Pectoralis major, and Pectoralis minor was significant in the 5, 35, and 45 V groups. The pH of 2 h postmortem in the 5 and 45 V groups was significantly lower (P < 0.05) than in the 15 and 25 V groups. In the 5 and 45 V groups, the protein solubility and shear force value were significantly lower (P < 0.05) and dripping loss was significantly higher (P < 0.05) than the other groups.

High Thermal Dissipation of Al Heat Sink When Inserting Ceramic Powders by Ultrasonic Mechanical Coating and Armoring

Aluminum alloys, which serve as heat sink in light-emitting diode (LED) lighting, are often inherent with a high thermal conductivity, but poor thermal total emissivity. Thus, high emissive coatings on the Al substrate can enhance the thermal dissipation efficiency of radiation. In this study, the ultrasonic mechanical coating and armoring (UMCA) technique was used to insert various ceramic combinations, such as Al₂O₃, SiO₂, or graphite, to enhance thermal dissipation. Analytic models have been established to couple the thermal radiation and convection on the sample surface through heat flow equations. A promising match has been reached between the theoretical predictions and experimental measurements. With the adequate insertion of ceramic powders, the temperature of the Al heat sinks can be lowered by 5–11 °C, which is highly favorable for applications requiring cooling components.

Biocompatibility study on Ni-free Ti-based and Zr-based bulk metallic glasses

Safety and reliability are crucial issues for medical instruments and implants. In the past few decays, bulk metallic glasses (BMGs) have drawn attentions due to their superior mechanical properties, good corrosion resistance, antibacterial and good biocompatibility. However, most Zr-based and Ti-based BMGs contain Ni as an important element which is prone to human allergy problem. In this study, the Ni-free Ti-based and Zr-based BMGs, Ti₄₀Zr₁₀Cu₃₆Pd₁₄, and Zr₄₈Cu₃₆Al₈Ag₈, were selected for systematical evaluation of their biocompatibility. Several biocompatibility tests, co-cultural with L929 murine fibroblast cell line, were carried out on these two BMGs, as well as the comparison samples of Ti6Al4V and pure Cu. The results in terms of cellular adhesion, cytotoxicity, and metallic ion release affection reveal that the Ti₄₀Zr₁₀Cu₃₆Pd₁₄ BMG and Ti6Al4V exhibit the optimum biocompatibility; cells still being attached on the petri dish with good adhesion and exhibiting the spindle shape after direct contact test. Furthermore, the Ti₄₀Zr₁₀Cu₃₆Pd₁₄ BMG showed very low Cu ion release level, in agreement with the MTT results. Based on the current findings, it is believed that Ni-free Ti-based BMG can act as an ideal candidate for medical implant.

[Mutant Rad50 enhances killing effects of radiation on nasopharyngeal carcinoma cell line CNE1]

Objective: To investigate the killing effects of radiation and mutant Rad50 transfection on human nasopharyngeal carcinoma cell line CNE1. Methods: The experimental groups included: control group, Ad-Rad50-GFP group, Ad-EGFP group, irradiation group, Ad-Rad50-GFP combined with irradiation group, and Ad-EGFP combined with irradiation group. CNE1 cells were transfected with recombinant adenoviral vector Ad-Rad50-GFP carrying mutant Rad50 gene. The expressions of Mre11, Rad50, Nbs1, and relevant constituents composing MRN complex were detected by Western Blot. Neutral comet assay was used to detect the effect of mutant Rad50 on restoration process of DNA damage. Cell growth curve was used to evaluate the growth inhibition of CNE1 by mutant Rad50 and radiation. Results: Expressions of Mre11, Rad50, and Nbs1 in cells of Ad-Rad50-GFP group were less significantly than those in control group when irradiation was completed (0.48 vs 0.62, 0.42 vs 0.5, and 0.53 vs 0.69, respectively, P<0.05) and 24 hours after irradiation (0.41 vs 0.69, 0.46 vs 0.58, and 0.34 vs 0.78, respectively, P<0.05). The mean tail moment (MTM) in Ad-Rad50-GFP plus irradiation group was higher than that in irradiation group when irradiation was completed (16.06 vs 14.8, P<0.05), 24 hours after irradiation (58.23 vs 15.89, P<0.05) and 48 hours after irradiation: (45.12 vs 11.42, P<0.05). Seven days after irradiation, the cells in Ad-Rad50-GFP plus irradiation group was less than those in control group or irradiation group (both P<0.05). Conclusion: Mutant Rad50 enhances killing effects of radiation on nasopharyngeal carcinoma cell line CNE1.

Effect of fast pH decline during the early postmortem period on calpain activity and cytoskeletal protein degradation of broiler M. pectoralis major

The objective of this study was to determine the effects of fast pH decline during the early postmortem period on calpain activity and the degradation of cytoskeletal proteins in broilers. Eighty broilers were randomly categorized into two groups: physical restraint (PR) and free struggle (FS). M. pectoralis major (PM) was used for determination of calpain activity, shear value, ultrastructure of myofibrils, and the degradation of desmin, titin, nebulin, and troponin-T. The pH (6.05) of FS group is significantly low than PR group (6.38) at 0.3 h postmortem. Fast pH decline during the early postmortem period led to a decrease of μ/m-calpain activities at 0.3 and 3 h postmortem (P < 0.05), but did not affect the ultimate μ/m-calpain activity. An initial fast decrease in pH increased the degradation of desmin, titin, nebulin, and increased the 30 kDa degradation fragments of troponin-T. Therefore, the fast pH decline during the early postmortem period decreased the μ/m-calpain activity and increased the degradation of cytoskeletal proteins in broiler muscle. It is possible that the fast pH decline experienced an earlier activation of calpains that resulted in earlier protein degradation and ultimately lower shear force.

Designing a stronger interface through graded structures in amorphous/nanocrystalline ZrCu/Cu multilayered films

Many multilayered nano-structures appear to fail due to brittle matter along the interfaces. In order to toughen them, in this study, the microstructure and interface strength of multilayered thin films consisting of amorphous ZrCu and nanocrystalline Cu (with sharp or graded interfaces) are examined and analyzed. The interface possesses a gradient nature in terms of composition, nanocrystalline phase size and volume fraction. The bending results extracted from the nano-scaled cantilever bending samples demonstrate that multilayered films with graded interfaces would have a much higher interface bending strength/strain/modulus, and an overall improvement upgrade of more than 50%. The simple graded interface design of multilayered thin films with improved mechanical properties can offer much more promising performance in structural and functional applications for MEMS or optical coating.

Effects of Laser Annealing Parameters on Optical and Electrical Properties of ITO/Metallic Glass Alloy Bi-layer Films

AgAlMg (AAM) films with three different atomic percentage compositions are prepared, namely, Ag12Al62Mg26 (denoted as A1AM), Ag22Al46Mg32 (denoted as A2AM), and Ag36Al25Mg39 (denoted as A3AM). In addition, the AAM films are deposited with four different thicknesses, i.e., 3, 6, 9, and 12 nm. The indium-tin oxide thickness is assigned a constant value of 30 nm in every case. The results show that the optical transmittance of the AAM/IAAM films improves (i.e., increases) with a reducing AAM film thickness, while the electrical resistivity improves (i.e., reduces) with an increasing film thickness. It is shown that the IA2AM film with an AMM thickness of 9 nm yields the optimal compromise between the optical transmittance and the electrical resistivity. The as-deposited IAAM films are found to have optical transmittance and electric resistivity values of 65 % and 90 Ω/□, respectively. The IA2AM films are annealed using a near-infrared laser at different pulse energies with a wavelength of 1064 nm and repetition rates ranging from 100 ~ 400 kHz. For both films, the optical and electrical properties are enhanced as the pulse energy increases to a certain critical value due to a transition from an amorphous microstructure to a crystalline structure. Given a repetition rate of 400 kHz and a pulse energy of 1.03 μJ, the optical transmittance and sheet resistance of the IAAM film are found to be 80 % and 15 Ω/□, respectively. The corresponding value of the Haacke figure of merit changed from 0.15 × 10(-3) to 7.16 × 10(-3) Ω(-1) due to the optimal laser annealing conditions.

Mesenchymal stromal cells derived from acute myeloid leukemia bone marrow exhibit aberrant cytogenetics and cytokine elaboration

Bone marrow-derived mesenchymal stromal cells (BM-MSCs) play a fundamental role in the BM microenvironment (BME) and abnormalities of these cells may contribute to acute myeloid leukemia (AML) pathogenesis. The aim of the study was to characterize the cytokine and gene expression profile, immunophenotype and cytogenetics of BM-MSCs from AML patients compared to normal BM-MSCs from healthy donors. AML BM-MSCs showed decreased monocyte chemoattractant protein-1 levels compared to normal BM-MSCs. AML BM-MSCs expressed similar β1 integrin, CD44, CD73, CD90 and E-cadherin compared to normal BM-MSCs. Cytogenetic analysis revealed chromosomal aberrations in AML BM-MSCs, some overlapping with and others distinct from their corresponding AML blasts. No significant difference in gene expression was detected between AML BM-MSCs compared to normal BM-MSCs; however, comparing the differences between AML and MSCs from AML patients with the differences between normal hematopoietic cells and normal MSCs by Ingenuity pathway analysis showed key distinctions of the AML setting: (1) upstream gene regulation by transforming growth factor beta 1, tumor necrosis factor, tissue transglutaminase 2, CCAAT/enhancer binding protein alpha and SWItch/Sucrose NonFermentable related, matrix associated, actin dependent regulator of chromatin, subfamily a, member 4; (2) integrin and interleukin 8 signaling as overrepresented canonical pathways; and (3) upregulation of transcription factors FBJ murine osteosarcoma viral oncogene homolog and v-myb avian myeloblastosis viral oncogene homolog. Thus, phenotypic abnormalities of AML BM-MSCs highlight a dysfunctional BME that may impact AML survival and proliferation.

Lens of controllable optical field with thin film metallic glasses for UV-LEDs

In the exposure process of photolithography, a free-form lens is designed and fabricated for UV-LED (Ultraviolet Light-Emitting Diode). Thin film metallic glasses (TFMG) are adopted as UV reflection layers to enhance the irradiance and uniformity. The Polydimethylsiloxane (PDMS) with high transmittance is used as the lens material. The 3-D fast printing is attempted to make the mold of the lens. The results show that the average irradiance can be enhanced by 6.5~6.7%, and high uniformity of 85~86% can be obtained. Exposure on commercial thick photoresist using this UV-LED system shows 3~5% dimensional deviation, lower than the 6~8% deviation for commercial mercury lamp system. This current system shows promising potential to replace the conventional mercury exposure systems.

Promising antimicrobial capability of thin film metallic glasses

Thin film metallic glasses (TFMGs) are demonstrated to exhibit excellent surface flatness, high corrosion resistance and satisfactory hydrophobic properties. Moreover, the antimicrobial and biocompatibility abilities of TFMGs are examined and the results are compared with the behavior of pure Ag and 316L stainless steel. Three TFMGs, Al48Ag37Ti15, Zr54Ti35Si11, and Zr59Ti22Ag19, are prepared by sputtering to assess the antimicrobial performance against Staphylococcus aureus, Escherichia coli and Pseudomonas aeruginosa, which are the most common nosocomial infection pathogens. Experimental results show that the antimicrobial effect of the Al- or Ag-containing AlAgTi and ZrTiAg TFMGs is similar to that of the pure Ag coating. The ZrTiSi TFMG with no Ag or Al shows poor antimicrobial capability. The physical properties of highly smooth surface and hydrophobic nature alone are not sufficient to result in promising antimicrobial ability. The chemical metal ion release still plays a major role, which should be born in mind in designing biomedical devices.

Human infection with novel G3P[25] rotavirus strain in Taiwan

Genotype P[25] rotaviruses are rare and to date have been reported to occur only in a few countries of mainland Asia. Here we report the molecular characterization of a novel human rotavirus genotype combination, G3P[25], detected in a 17-month-old child hospitalized due to severe gastroenteritis during 2009 in central Taiwan. Sequencing and phylogenetic analysis of the VP4 gene demonstrated a distinct origin from other strains bearing the P[25] VP4 gene, whereas the VP7, VP6 and NSP4 gene phylogenies identified common origins with cognate genes of other, presumed human-porcine reassortment Taiwanese strains. These results suggest that interactions between human and animal strains appear to contribute to the generation of genetic and antigenic diversity of rotavirus strains, with potential public health importance in Taiwan.

Identification of sex-specific polymorphic sequences in the goat amelogenin gene for embryo sexing

Amelogenin (AMEL) is a conserved gene located on the sex chromosomes of mammals. It is involved in the formation of enamel, which is the hard, white material that forms the protective outer layer of each tooth. In this study, we first cloned and determined the intron sequences of the goat AMELX and AMELY genes from female and male ear tissues. The polymorphic AMEL alleles were further analyzed by PCR-based RFLP and Southern blot hybridization analyses. Results showed that intron 5 nucleotide sequences of the goat AMELY gene contains multiple deletions/insertions and shares only 48.5% identity to intron 5 of the goat AMELX gene. Based on the polymorphic AMEL intron sequences, a set of sex-specific triplex primers was designed to PCR amplify a single fragment of 264 bp from the X chromosome of female goats and 2 fragments of 264 and 206 bp from the X and Y chromosomes, respectively, of male goats. An increased sensitivity for sex determination was reached with a single blastomere at the blastula stage isolated from goat embryos. A total of 43 goat embryos were used to estimate a 100% accuracy rate of this method confirmed by chromosomal karyotyping and live births. The embryo sexing technique has been successfully applied in different strains of goats including Alpine, Saanen, Nubian, and Taiwan goats.

High T2 signal in primary lateral sclerosis supports the topographic distribution of fibers in the corpus callosum: assessing disease in the primary motor segment

PLS is a disease of the UMN, distinguished from ALS in prognosis and absence of LMN signs. We present, to our knowledge, the first conventional MR imaging visualization of the callosal motor segment, a concept previously supported by primate models, electrophysiologic studies, and postmortem examinations. Modification of the Witelson topographic scheme of the CC is supported by MR tractography. On the basis of 2 cases of PLS, we present conventional imaging confirmation of the revised topographic scheme of fiber distribution across the CC.

Rapid fabrication of a micro-ball lens array by extrusion for optical fiber applications

Batch-fabrication of a micro-ball lens array (MBA) could not only reduce micro assembly costs but also replace conventional ball lenses or costly GRINs (Gradient Refractive Index) without compromising performance. Compared with conventional half-spherical micro-lenses, the MBA is a spherical micro-lens that can focus light in all directions, thus providing the flexibility required for optical applications. Current MBAs are made of SU-8 photoresist by an extrusion process rather than the traditional thermal reflow process. The aim of this study was to develop a new process for MBA batch-fabrication, performed at ambient temperature, by spin-coating SU-8 onto a silicon-wafer surface, which serves as an extrusion plate, and extruding it through a nozzle to form an MBA. The nozzle consists of a nozzle orifice and nozzle cavity, the former being defined and made from SU-8 photoresist using ultra-violet (UV) lithography, which results in good mechanical properties. In this paper, the fabrication of 4 x 4 MBAs with diameters ranging from 60 to 550 um is described. Optical measurements indicated a diameter variance within 3% and a maximum coupling efficiency of approximately 62% when the single mode fiber (SMF) was placed at a distance of 10 um from the MBA. The results of this study proved that MBA fabrication by the extrusion process can enhance the coupling efficiency.

Comparison of cone beam computed tomography imaging with physical measures

OBJECTIVES

The goal of this study was to determine the accuracy of measuring linear distances between landmarks commonly used in orthodontic analysis on a human skull using two cone beam CT (CBCT) systems.

METHODS

Measurements of length were taken using volumetric data from two CBCT systems and were compared with physical measures using a calliper applied to one human adult skull. Landmarks were identified with chromium steel balls embedded at 32 cranial and 33 mandibular landmarks and the linear measures were taken with a digital calliper. The skull was then scanned with two different CBCT systems: the NewTom QR DVT 9000 (Aperio Inc, Sarasota, FL) and the Hitachi MercuRay (Hitachi Medico Technology, Tokyo, Japan). CT data including the landmark point data were threshold segmented using CyberMed's CB Works software (CB Works 1.0, CyberMed Inc., Seoul, Korea). The resulting segmentations were exported from CB Works as VRML (WRL) files to Amira software (Amira 3.1, Mercury Computer Systems GmbH, Berlin, Germany).

RESULTS

The error was small compared with the gold standard of the physical calliper measures for both the NewTom (0.07+/-0.41 mm) and CB MercuRay (0.00+/-0.22 mm) generated data. Absolute error to the gold standard was slightly positive, indicating minor compression relative to the calliper measurement. The error was slightly smaller in the CB MercuRay than in the NewTom, probably related to a broader greyscale range for describing beam attenuation in 12-bit vs 8-bit data.

CONCLUSIONS

The volumetric data rendered with both CBCT systems provided highly accurate data compared with the gold standard of physical measures directly from the skulls, with less than 1% relative error.

Comparing sequence and expression for predicting microRNA targets using GenMiR3

We present a new model and learning algorithm, GenMiR3, which takes into account mRNA sequence features in addition to paired mRNA and miRNA expression profiles when scoring candidate miRNA-mRNA interactions. We evaluate three candidate sequence features for predicting miRNA targets by assessing the expression support for the predictions of each feature and the consistency of Gene Ontology Biological Process annotation of their target sets. We consider as sequence features the total energy of hybridization between the microRNA and target, conservation of the target site and the context score which is a composite of five individual sequence features. We demonstrate that only the total energy of hybridization is predictive of paired miRNA and mRNA expression data and Gene Ontology enrichment but this feature adds little to the total accuracy of GenMiR3 predictions using for expression features alone.

Trichostatin A and nuclear reprogramming of cloned rabbit embryos

To investigate the influence of histone deacetylases on nuclear reprogramming after nuclear transfer, we treated the cloned embryos with a histone deacetylase inhibitor, Trichostatin A (TSA). In the present study, global changes in acetylation of histone H3-lysine 14, histone H4-lysine 12, and histone H4-lysine 5 were studied in rabbit in vivo fertilized embryos, somatic cell nuclear transfer (SCNT) embryos, and TSA-treated SCNT embryos. From the pronuclear to the morula stage, the deacetylation-reacetylation changes in acetylation of histone H3-lysine 14 and histone H4-lysine 12 occurred in both fertilized embryos and TSA-treated cloned embryos; however, the distribution pattern in untreated cloned embryos failed to display such changes. More interesting, the signal of acetylation of histone H4-lysine 12 in cloned embryos was detected in both the inner cell mass and the trophectoderm, whereas TSA-treated cloned embryos showed the same staining pattern as fertilized embryos and the staining was limited to the inner cell mass. The histone acetylation pattern of TSA-treated SCNT embryos appeared to be more similar to that of normal embryos, indicating that TSA could improve nuclear reprogramming after nuclear transfer.

The effect of electrical field strength on activation and development of cloned caprine embryos

The activation procedure used in nuclear transfer (NT) is one of the critical factors affecting the efficiency of animal cloning. The purpose of this study was to compare the effect of two electrical field strengths (EFS) for activation on the developmental competence of caprine NT embryos reconstructed from ear skin fibroblasts of adult Alpine does. The NT embryos were obtained by transfer of the quiescent fibroblasts at the fourth passage into the enucleated metaphase II (M II) oocytes. Four to five hours after electrical fusion, the NT-embryos were activated by EFS either at 1.67 or at 2.33 kV/cm and immediately incubated in 6-DMAP (2 mM) for 4 h. The cleavage rate of the NT-embryos activated with 2.33 kV/cm was greater than that activated with 1.67 kV/cm after in vitro culture for 18 h (65.6% versus 19.6%, p < 0.001). No pregnancy was found in 14 recipient does after transferring 51 NT embryos at 1-2 cell stages activated with 1.67 kV/cm. In contrast, two of the seven recipients were pregnant and gave birth to three kids after transferring 61 NT embryos at 1-2 cell stages activated by 2.33 kV/cm. The birth weights of three cloned kids were within the normal range of Alpine goats. However, one kid died 1h after birth while the remaining two are still healthy. DNA analysis by polymerase chain reaction (single-strand conformation polymorphism, SSCP) confirmed that the three kids were genetically identical to the nuclear donor.

Transient or occult HIV infections may occur more frequently than progressive infections: changing the paradigm about HIV persistence

Evidence of transient HIV infections was found in 8 subjects at high-risk for HIV infection among 47 longitudinally studied over 2-5 (average approximately 3.5) years, whereas only two subjects developed progressive infection. All of these subjects developed serum antibodies (Ab) to conformational epitopes of HIV gp41 (termed "early HIV Ab"), but the 8 transiently infected subjects lost this Ab within 4-18 months, and did not seroconvert to positivity in denatured antigen EIA or Western Blot (WB). However, the two progressively infected subjects eventually seroconverted in the EIA and WB tests within one to two months after the appearance of "early HIV Ab". HIV env and nef sequences were directly PCR amplified from the peripheral blood mononuclear cells (PBMCs) of two of the eight transiently infected subjects during the time of "early HIV Ab"-postivity, and these showed significant sequence divergence from the HIV strains in the laboratory, indicating that they were not laboratory contaminants. Genome identity typing ("paternity-typing") of PBMC samples obtained at the time of "early HIV Ab"-positivity, and later when Ab was absent from each of the 8 subjects, showed that blood samples were not mixed-up. This provides further evidence that transient or occult infection with HIV does occur, and perhaps at a greater frequency than do progressive infections.

High-rate wastewater treatment by aerobic upflow sludge blanket reactor: system performance and characteristics

A laboratory study was conducted to investigate the characteristics of an aerobic upflow sludge blanket reactor (AUSB) treating synthetic wastewater at a high organic loading. The response of the system was evaluated at different operating conditions, such as pressurization, extent of flow recirculation, and hydraulic retention time. Aeration shear to the biomass in the reactor was totally eliminated by employing oxygenation under pressurization in an external chamber. As a result, the biomass concentration in the reactor could be maintained at 7-10 g VSS l(-1). The AUSB system was able to handle efficiently a volumetric loading of as high as 3.8 kg TOC m(-3) d(-1), which was possibly due to high reactor biomass level and higher bioactivity as indicated by higher sludge specific oxygen uptake rates. However, the treatment capacity of the AUSB was somewhat limited by the substrate and oxygen transport in the sludge bed due to low mixing intensity. The effluent TOC of the AUSB system was relatively higher due to its operation at a high organic loading. The AUSB system performed well under a short term loading shock, and the bacterial activity in the oxygenation chamber was demonstrated to contribute to its improved substrate removal capacity under the shock loading.

High rate treatment by aerobic upflow sludge blanket (AUSB) with external oxygenation

A 3-year study was conducted using an aerobic upflow sludge blanket (AUSB) reactor to achieve high-rate biological treatment through maintenance of a high biomass concentration (7-10 g VSS/L) together with a high oxygen flux. The AUSB reactor was not aerated directly; instead, oxygenation was provided in an external chamber with flow recirculation. The oxygenation was provided at four different pressurizations: 0, 15, 20 and 25 psig. The AUSB reactor was also pressurized to avoid the flotation of biomass. The flow recirculation rate was varied from 400% to 1,500% in order to ensure adequate oxygen supply. It was found that the AUSB system was able to handle a volumetric loading of as high as 10 kg COD/m3-day with a removal efficiency of 92%. Despite a high upflow velocity through AUSB, the effluent suspended solid concentration was mostly below 60 mg/L. The active fraction of biomass in the AUSB sludge was about 3 times higher than that of the regular activated sludge. This was indicated by a very high specific oxygen uptake rate (SOUR), up to 180-250 mg O2/g VSS-hr. The sludge yield in the entire system was only 0.09 to 0.13 g VSS/g COD removed. This was mainly caused by additional auto-oxidation of biosolids in the oxygenation chamber due to flow recirculation.

Co-removal of hexavalent chromium through adsorption during copper precipitation

A systematic study was conducted to assess the mechanisms involved in the co-removal of hexavalent chromium during chemical precipitation of divalent copper. Batch tests were used to assess the precipitation phenomena in both pure copper solutions and also mixed copper-Cr(VI) solutions with progressive addition of sodium carbonate to increase pH and induce precipitation. It was found that the co-removal of Cr(VI) was caused by two distinct mechanisms: coprecipitation of copper with Cr(VI) at pH 5.0 to 5.2, leading to the formation of CuCrO4 precipitates. Once the fine crystallites of CuCrO4 were formed, the test solution became heterogeneous and this accelerated the production of copper-carbonate precipitates, mainly in the form of CuCO3 Cu(OH)2, at pH 5.2 to 6.2. The latter precipitates were negatively charged at pH below 7.5, and thus they were able to adsorb a considerable amount of the remaining chromate ions [HCrO4- and CrO4(2-)]. The extent of adsorption depended on both pH and surface loading. Besides electrostatic attraction, ligand exchange was also found to play some role. Maximum adsorption occurred at pH 6.5. When pH was raised to 10.0, approximately 25-30% of the adsorbed chromium could become desorbed due to a surface charge reversal on the adsorbent.

Use of ORP (oxidation-reduction potential) to control oxygen dosing for online sulfide oxidation in anaerobic treatment of high sulfate wastewater

In this study, oxidation-reduction potential (ORP) was used as a controlling parameter to regulate oxygen dosing to the recycled biogas for online sulfide oxidation in an upflow anaerobic filter (UAF) system. The UAF was operated with a constant influent COD of 18,000 mg/L, but with different influent sulfates of 1000, 3000 and 6000 mg/L. The reactor was initially operated under a natural ORP of -290 mV (without oxygen injection), and was then followed by oxygenation to raise its ORP by 25 mV above the natural level for each influent sulfate condition. At 6,000 mg/L sulfate without oxygen injection, the dissolved sulfide reached 733.8 mg S/L with a corresponding free sulfide of 250.3 mg S/L, thus showing a considerable inhibition to methanogens. Upon oxygenation to raise its ORP to -265 mV (i.e., a 25 mV increase), the dissolved sulfide was reduced by more than 98.5% with a concomitant 45.9% increase of the methane yield. Under lower influent sulfate levels of 1,000 and 3,000 mg/L, the levels of sulfides produced, even under the natural ORP, did not impose any noticeable toxicity to methanogens. Upon oxygenation to raise the ORP by +25 mV, the corresponding methane yields were actually reduced by 15.5% and 6.2%, respectively. However, such reductions were not due to the adverse impact of the elevated ORP; instead, they were due to a diversion of some organic carbon to support the facultative activities inside the reactor as a result of excessive oxygenation. In other words, to achieve satisfactory sulfide oxidation for the lower influent sulfate conditions, it was not necessary to raise the ORP by as much as +25 mV. The ORP increase actually needed depended on both the influent sulfate and also actual wastewater characteristics. This study had proved that the ORP controlled oxygenation was reliable for achieving consistent online sulfide control.