[Effects of non-muscle myosin Ⅱ silenced bone marrow-derived mesenchymal stem cells transplantation on lung extracellular matrix in rats after endotoxin/lipopolysaccharide-induced acute lung injury]

Objective: To investigate the effects of non-muscle myosin Ⅱ (NMⅡ) gene silenced bone marrow-derived mesenchymal stem cells (BMMSCs) on pulmonary extracellular matrix (ECM) and fibrosis in rats with acute lung injury (ALI) induced by endotoxin/lipopolysaccharide (LPS). Methods: The experimental research methods were adopted. Cells from femur and tibial bone marrow cavity of four one-week-old male Sprague-Dawley rats were identified as BMMSCs by flow cytometry, and the third passage of BMMSCs were used in the following experiments. The cells were divided into NMⅡ silenced group transfected with pHBLV-U6-ZsGreen-Puro plasmid containing small interference RNA sequence of NMⅡ gene, vector group transfected with empty plasmid, and blank control group without any treatment, and the protein expression of NMⅡ at 72 h after intervention was detected by Western blotting (n=3). The morphology of cells was observed by an inverted phase contrast microscope and cells labeled with chloromethylbenzoine (CM-DiⅠ) in vitro were observed by an inverted fluorescence microscope. Twenty 4-week-old male Sprague-Dawley rats were divided into blank control group, ALI alone group, ALI+BMMSC group, and ALI+NMⅡ silenced BMMSC group according to the random number table, with 5 rats in each group. Rats in blank control group were not treated, and rats in the other 3 groups were given LPS to induce ALI. Immediately after modeling, rats in ALI alone group were injected with 1 mL normal saline via tail vein, rats in ALI+BMMSC group and ALI+NMⅡ silenced BMMSC group were injected with 1×107/mL BMMSCs and NMⅡ gene silenced BMMSCs of 1 mL labelled with CM-DiⅠ via tail vein, and rats in blank control group were injected with 1 mL normal saline via tail vein at the same time point, respectively. At 24 h after intervention, the lung tissue was collected to observe intrapulmonary homing of the BMMSCs by an inverted fluorescence microscope. Lung tissue was collected at 24 h, in 1 week, and in 2 weeks after intervention to observe pulmonary inflammation by hematoxylin eosin staining and to observe pulmonary fibrosis by Masson staining, and the pulmonary fibrosis in 2 weeks after intervention was scored by modified Ashcroft score (n=5). The content of α-smooth muscle actin (α-SMA), matrix metalloproteinase 2 (MMP-2), and MMP-9 was detected by immunohistochemistry in 2 weeks after intervention (n=3), the activity of superoxide dismutase (SOD), malondialdehyde, myeloperoxidase (MPO) was detected by enzyme-linked immunosorbent assay at 24 h after intervention (n=3), and the protein expressions of CD11b and epidermal growth factor like module containing mucin like hormone receptor 1 (EMR1) in 1 week after intervention were detected by immunofluorescence staining (n=3). Data were statistically analyzed with one-way analysis of variance, Bonferroni method, and Kruskal-Wallis H test. Results: At 72 h after intervention, the NMⅡprotein expression of cells in NMⅡ silenced group was significantly lower than those in blank control group and vector group (with P values <0.01). BMMSCs were in long spindle shape and grew in cluster shaped like vortexes, which were labelled with CM-DiⅠ successfully in vitro. At 24 h after intervention, cell homing in lung of rats in ALI+NMⅡ silenced BMMSC group was more pronounced than that in ALI+BMMSC group, while no CM-DiⅠ-labelled BMMSCs were observed in lung of rats in blank control group and ALI alone group. There was no obvious inflammatory cell infiltration in lung tissue of rats in blank control group at all time points, while inflammatory cell infiltration in lung tissue of rats in ALI+BMMSC group and ALI+NMⅡ silenced BMMSC group was significantly less than that in ALI alone group at 24 h after intervention, and alveolar wall turned to be thinner and a small amount of congestion in local lung tissue appeared in rats of the two groups in 1 week and 2 weeks after intervention. In 1 week and 2 weeks after intervention, collagen fiber deposition in lung tissue of rats in ALI alone group, ALI+BMMSC group, and ALI+NMⅡ silenced BMMSC group was significantly aggravated compared with that in blank control group, while collagen fiber deposition in lung tissue of rats in ALI+BMMSC group and ALI+NMⅡ silenced BMMSC group was significantly improved compared with that in ALI alone group. In 2 weeks after intervention, modified Ashcroft scores for pulmonary fibrosis of rats in ALI alone group, ALI+BMMSC group, and ALI+NMⅡ silenced BMMSC group were 2.36±0.22, 1.62±0.16, 1.06±0.26, respectively, significantly higher than 0.30±0.21 in blank control group (P<0.01). Modified Ashcroft scores for pulmonary fibrosis of rats in ALI+BMMSC group and ALI+NMⅡ silenced BMMSC group were significantly lower than that in ALI alone group (P<0.01), and modified Ashcroft score for pulmonary fibrosis of rats in ALI+NMⅡ silenced BMMSC group was significantly lower than that in ALI+BMMSC group (P<0.01). In 2 weeks after intervention, the content of α-SMA in lung tissue of rats in ALI+BMMSC group and ALI+NMⅡ silenced BMMSC group were significantly decreased compared with that in ALI alone group (P<0.05 or P<0.01). The content of MMP-2 in lung tissue of rats in the 4 groups was similar (P>0.05). The content of MMP-9 in lung tissue of rats in ALI alone group was significantly increased compared with that in blank control group (P<0.01), and the content of MMP-9 in lung tissue of rats in ALI+BMMSC group and ALI+NMⅡ silenced BMMSC group was significantly decreased compared with that in ALI alone group (P<0.01). At 24 h after intervention, the activity of malondialdehyde, SOD, and MPO in lung tissue of rats in ALI alone group, ALI+BMMSC group, and ALI+NMⅡ silenced BMMSC group were significantly increased compared with that in blank control group (P<0.01), the activity of malondialdehyde in lung tissue of rats in ALI+NMⅡ silenced BMMSC group and the activity of SOD in lung tissue of rats in ALI+BMMSC group and ALI+NMⅡ silenced BMMSC group were significantly increased compared with that in ALI alone group (P<0.05 or P<0.01), and the activity of SOD in lung tissue of rats in ALI+NMⅡ silenced BMMSC group was significantly decreased compared with that in ALI+BMMSC group (P<0.01). The activity of MPO in lung tissue of rats in ALI+BMMSC group and ALI+NMⅡ silenced BMMSC group was significantly decreased compared with that in ALI alone group (P<0.01), and the activity of MPO in lung tissue of rats in ALI+NMⅡ silenced BMMSC group was significantly decreased compared with that in ALI+BMMSC group (P<0.01). In 1 week after intervention, the protein expression of CD11b in lung tissue of rats in ALI+NMⅡ silenced BMMSC group was significantly increased compared with those in the other three groups (P<0.05 or P<0.01), while the protein expressions of EMR1 in lung tissue of rats in the four groups were similar (P>0.05). Conclusions: Transplantation of NMⅡ gene silenced BMMSCs can significantly improve the activity of ECM components in the lung tissue in LPS-induced ALI rats, remodel its integrity, and enhance its antioxidant capacity, and alleviate lung injury and pulmonary fibrosis.

Precision Medicine Approach for Cardiometabolic Risk Factors in Therapeutic Apheresis

Lipoprotein apheresis (LA) is currently the most powerful intervention possible to reach a maximal reduction of lipids in patients with familial hypercholesterolemia and lipoprotein(a) hyperlipidemia. Although LA is an invasive method, it has few side effects and the best results in preventing further major cardiovascular events. It has been suggested that the highly significant reduction of cardiovascular complications in patients with severe lipid disorders achieved by LA is mediated not only by the potent reduction of lipid levels but also by the removal of other proinflammatory and proatherogenic factors. Here we performed a comprehensive proteomic analysis of patients on LA treatment using intra-individually a set of differently sized apheresis filters with the INUSpheresis system. This study revealed that proteomic analysis correlates well with routine clinical chemistry in these patients. The method is eminently suited to discover new biomarkers and risk factors for cardiovascular disease in these patients. Different filters achieve reduction and removal of proatherogenic proteins in different quantities. This includes not only apolipoproteins, C-reactive protein, fibrinogen, and plasminogen but also proteins like complement factor B (CFAB), protein AMBP, afamin, and the low affinity immunoglobulin gamma Fc region receptor III-A (FcγRIIIa) among others that have been described as atherosclerosis and metabolic vascular diseases promoting factors. We therefore conclude that future trials should be designed to develop an individualized therapy approach for patients on LA based on their metabolic and vascular risk profile. Furthermore, the power of such cascade filter treatment protocols may improve the prevention of cardiometabolic disease and its complications.

Carbon footprint and net carbon gain of major long-term cropping systems under no-tillage

Due to increased contribution from agriculture sector to total greenhouse gas emissions, there is need to study the ability of no-tilled diverse cropping systems including crop sequences and bio-covers to mitigate C equivalent emissions. Thus, C-footprint was calculated for a long-term experiment at the University of Tennessee's Research and Education Center in Milan with six-crop sequences: continuous cotton (Gossypium hirsutum L.), cotton-corn (Zea mays L.), continuous corn, corn-soybean (Glycine max L.), continuous soybean, and soybean-cotton interacted with four bio-covers: poultry litter, hairy vetch (Vicia villosa), winter wheat (Triticum aestivum), and fallow control with three replicates in a strip-plot design. During the experiment duration (2002-2017), field inputs (fertilizers, pesticides, and machinery used for planting, chemical applications, and harvesting) and outputs (crop yield, aboveground, and belowground residue) were assessed for each crop sequence/bio-cover combination to calculate total C equivalence of inputs and outputs, net C gain, C footprint per kg yield, sustainability index, and nitrous oxide emissions. For continuous corn, C-based input emissions were significantly higher by 0.28-0.62 Mg CO₂ eq. ha^-1 yr^-1 than all other sequences, however, a greater net C gain (5.4 Mg C eq. ha^-1 yr^-1) was also observed due to increased crop yield, aboveground and belowground residues. Poultry litter application resulted in lower C-footprint (1.59-2.09 kg CO₂ eq. kg^-1 yield) than hairy vetch, wheat, and fallow under all crop sequences. Hairy vetch also lowered C-footprint per kg yield (∼2-14%) when compared with wheat under continuous systems of corn, soybean, and cotton, and cotton-corn rotation. Poultry litter application increased sustainability index (23-45) of all cropping sequences compared with other bio-covers. Hairy vetch improved sustainability index of corn including cropping sequences as compared with wheat and fallow. Inclusion of soybean and cotton with corn significantly decreased nitrous oxide emissions by 20-25%. The major factor contributing towards C-based input emissions was N fertilizer with 68% contribution to total emissions on average. It is concluded that application of poultry litter can reduce per yield C-footprint and enhance production system sustainability compared with hairy vetch, wheat, and fallow for monocultures or rotations of corn, soybean, cotton. Additionally, hairy vetch can outperform wheat in reducing the per yield C-footprint for continuous corn/soybean/cotton, and cotton-corn rotation. Especially for corn production systems, hairy vetch can enhance sustainability index compared with wheat and fallow. In order to increase per hectare net C gain, reduce per yield C-footprint and enhance sustainability index simultaneously, integration of continuous corn or corn-soybean/cotton rotation with bio-cover poultry litter or hairy vetch may perform better than the monocultures of soybean or cotton integrated with bio-cover wheat or fallow control in the Mid-south USA.

Intrauterine Bigatti Shaver (IBS ® ) successful placental remnants removal, after caesarean section for a cervical pregnancy with placenta accreta

Placenta accreta located in a caesarean section scar is difficult to remove. The Intrauterine Bigatti Shaver (IBS®) has already been proven to be effective in placental remnant removal. Our case report highlights that the IBS® is also a safe method to remove placental remnants attached to a previous caesarean section scar performed for a cervical pregnancy and associated with placenta accreta.

Pembrolizumab versus chemotherapy for patients with esophageal squamous cell carcinoma enrolled in the randomized KEYNOTE-181 trial in Asia

BACKGROUND

In the randomized phase III KEYNOTE-181 study, pembrolizumab prolonged overall survival (OS) compared with chemotherapy as second-line therapy in patients with advanced esophageal cancer and programmed death-ligand 1 (PD-L1) combined positive score (CPS) ≥10. We report a post hoc subgroup analysis of patients with esophageal squamous cell carcinoma (ESCC) enrolled in KEYNOTE-181 in Asia, including patients from the KEYNOTE-181 China extension study.

PATIENTS AND METHODS

Three hundred and forty Asian patients with advanced/metastatic ESCC were enrolled in KEYNOTE-181, including the China cohort. Patients were randomly assigned 1 : 1 to receive pembrolizumab 200 mg every 3 weeks for ≤2 years or investigator's choice of paclitaxel, docetaxel, or irinotecan. OS, progression-free survival, response, and safety were analyzed without formal comparisons. OS was evaluated based on PD-L1 CPS expression level.

RESULTS

In Asian patients with ESCC, median OS was 10.0 months with pembrolizumab and 6.5 months with chemotherapy [hazard ratio (HR), 0.63; 95% CI 0.50-0.80; nominal P < 0.0001]. Median progression-free survival was 2.3 months with pembrolizumab and 3.1 months with chemotherapy (HR, 0.79; 95% CI 0.63-0.99; nominal P = 0.020). Objective response rate was 17.1% with pembrolizumab and 7.1% with chemotherapy; median duration of response was 10.5 months and 7.7 months, respectively. In patients with PD-L1 CPS <1 tumors (pembrolizumab versus chemotherapy), the HR was 0.99 (95% CI 0.56-1.72); the HR (95% CI) for death was better for patients with PD-L1 CPS cut-offs >1 [CPS ≥1, 0.57 (0.44-0.75); CPS ≥5, 0.56 (0.41-0.76); CPS ≥10, 0.53 (0.37-0.75)]. Treatment-related adverse events were reported in 71.8% of patients in the pembrolizumab group and 89.8% in the chemotherapy group; grade 3-5 events were reported in 20.0% and 44.6%, respectively.

CONCLUSIONS

Pembrolizumab monotherapy demonstrated promising efficacy in Asian patients with ESCC, with fewer treatment-related adverse events than chemotherapy. PD-L1 CPS ≥1 is an appropriate cut-off and a predictive marker of pembrolizumab efficacy in Asian patients with ESCC.

Slow light nanocoatings for ultrashort pulse compression

Transparent materials do not absorb light but have profound influence on the phase evolution of transmitted radiation. One consequence is chromatic dispersion, i.e., light of different frequencies travels at different velocities, causing ultrashort laser pulses to elongate in time while propagating. Here we experimentally demonstrate ultrathin nanostructured coatings that resolve this challenge: we tailor the dispersion of silicon nanopillar arrays such that they temporally reshape pulses upon transmission using slow light effects and act as ultrashort laser pulse compressors. The coatings induce anomalous group delay dispersion in the visible to near-infrared spectral region around 800 nm wavelength over an 80 nm bandwidth. We characterize the arrays' performance in the spectral domain via white light interferometry and directly demonstrate the temporal compression of femtosecond laser pulses. Applying these coatings to conventional optics renders them ultrashort pulse compatible and suitable for a wide range of applications.

On-site in situ high-pressure ultrafast pump-probe spectroscopy instrument

We conceive and construct an on-site in situ high-pressure time-resolved ultrafast optical spectroscopy instrument that facilitates ultrafast pump-probe dynamics measurements under high pressure conditions. We integrate an ultrafast pump-probe spectroscopy system with a diamond anvil cell (DAC) system. Significantly, both the DAC and the sample are fixed within the light path without motion and rotation throughout the whole ultrafast spectroscopy experiment, including tuning and calibrating the pressure. This instrument thus avoids introducing artifacts due to sample motion or rotation, enabling precision high-pressure ultrafast pump-probe dynamics investigations. As a demonstrating example, we compare the effect of on-site in situ conditions with off-site in situ conditions on the ultrafast dynamics of Sr₂IrO₄ under 0-44.5 GPa high pressure. Our data and analysis show that conventional possible artifacts are greatly reduced by using the on-site in situ layout. Our work helps the high-pressure ultrafast science investigation develop into a promising new area, which enables the exploration of nonequilibrium excited quantum states in the high-pressure regime.

[The characteristics and change of aeroallergens in children from 2015 to 2020 in a hospital of pediatric in Beijing]

Objective: To analyze the characteristics of clinical distribution and change of aeroallergens in children with allergic diseases from 2015 to 2020. Methods: Children who visited Capital Institute of Pediatrics affiliated Children's Hospital, suspected of allergic diseases and received serum aeroallergens specific immunoglobulin E (sIgE) test were retrospectively enrolled (1 to 14 years old). sIgE was detected by Phadia1000 system with radioallergosorbent test fluorescent enzyme-linked immunoassay. The characteristics and change of the aeroallergens among the 6 years was analyzed. Enumeration data were expressed by percentage and categorical variables were compared by the independent samples t-test and Pearson χ² test. Results: In total 4 608 tests (4 575 patients) of children were enrolled, the average age was (5.4±2.9) years old, with the median age of 5.0 years old. 3 176 were boys (68.9%), and 1 432 were girls (31.1%). 4 294 children were from the north of China (93.2%), 295 children were from the south of China (6.4%), and 19 children were from unknown regions (0.4%). In total the most common aeroallergen was mold mixture (1 956/4 457 tests, 43.9%) and Alternaria alternata (276/630 tests, 43.8%), followed by Artemisia (300/889 tests, 33.7%), Humulus scandens (12/38 tests, 31.6%) and grass mixture (909/2 874 tests, 31.6%). Among the 6 years, mold, grass pollen and tree pollen sensitization increased, and mold [38/130 (29.2%) vs 1 574/3 233 (48.7%)], grass pollen [11/77 (14.3%) vs 1 069/3 072 (34.8%)] increased significantly (χ² was 18.953 and 49.559, respectively, P=0.000). Positive rate of tree pollen increased [1/10 (10.0%) vs 516/2 122 (24.3%)], but did not have statistical significance (χ²=1.111, P=0.292). Dust mite [36/146 (24.7%) vs 321/1 408 (22.8%)] and hair of pets [7/33 (21.2%) vs 321/1 408 (17.1%)] sensitization didn't change greatly (χ² =0.258, P =0.611; χ² =0.379, P =0.538). In 2015, the most common aeroallergens was mold (38/130, 29.2%), followed by dust mite (36/146, 24.7%), while in 2020, the most common aeroallergens was still mold (1 574/3 233, 48.7%), with grass pollen (1 069/3 072, 34.8%) and tree pollen (516/2 122, 24.3%) ranked after. Conclusion: Mold might be the most common aeroallergens in allergic children in Beijing area. With time went on, dust mite was gradually exceeded by grass pollen and tree pollen.

Designing nanofibrous membrane with biomimetic caterpillar-like structured for highly-efficient and simultaneous removal of insoluble emulsified oils and soluble dyes towards sewage remediation

Purification of insoluble emulsified oils and soluble organic pollutants from sewage has attracted tremendous attention in today's society. Herein, a stable and environmentally friendly nanofibrous membrane with hierarchical caterpillar-like structure was fabricated via in-situ hydrothermal growing the nickel-cobalt layered double hydroxides (NiCo-LDHs) on tche polyacrylonitrile (PAN) electrospun nanofibers. The wrapped hydrophilic NiCo-LDHs constructed the hierarchical structure and endowed the membrane attractive superhydrophilicity (≈ 0°)/underwater superoleophobicity (≈ 161°) and enhanced oil-repellency performance. Meanwhile, the NiCo-LDH@PANI/oPAN NFMs can display the ultra-fast flux of SSEs (xylene/water emulsion, 4175 L m^-2 h^-1) and satisfactory separation efficiency (99.07%). Moreover, the introduction of positively charged NiCo-LDHs increased plentiful adsorption active sites for membranes, which is beneficial to demulsify ionic SSEs and adsorb organic pollutants. Finally, for simultaneous purification of complex sewage by the dead-end and cross-flow filtration experiment, the composite membrane both displayed splendid removal rate of oil (> 99.0%) and dyes (> 99.0%), robust regeneration recycle-ability and no secondary pollution. Hence, it is expected that such strategy of combining electrospun and chelating-assisted in-situ hydrothermal can provide a low energy consumption and high decontamination technology for severe environmental crisis.

Multifunctional filtration membrane with anti-viscous-oils-fouling capacity and selective dyes adsorption ability for complex wastewater remediation

Multifunctional filtration membranes (MFMs), which can both effectively separate oil and selectively remove dyes from polluted aquatic system with robust anti-viscous-oil-fouling capacity, strong chemical/physical resistance, and long cycled stability, are highly required but still a challenge to be realized. Herein, a simple route has been demonstrated to address this challenge aforementioned by decorating both halloysite nanotubes (HNTs) and zwitterionic poly (sulfobetaine methyl methacrylate) (PSBMA) on the microporous polyvinylidene fluoride (PVDF) membrane surface via modified polydopamine (PDA) coating route. The as-prepared membrane exhibits super-hydrophilic/underwater super-oleophobic performance and high water permeation flux (32529 ± 278 L m^-2 h^-1 at 0.85 bar) to purify the diverse viscous oil-in-water emulsions from oily wastewater accompanying with good cycled stability (the recovery rate of permeate flux is close to 100% after 5 cycles). Moreover, the as-prepared MFM possesses not only strong chemical resistance under wide range of pH value (from 1 to 12) and high saline (NaCl: 10 wt%) environment, but also physical resistance against ultrasound bath for 30 min. Given the presence of HNTs, PDA, and PSBMA, our MFM shows enough active sites to adsorb the soluble dyes and metallic ions in wastewater. These excellent properties endow our MFM with great potential for the remediation of complex wastewater.

One-step in-situ fabrication of carbon nanotube/stainless steel mesh membrane with excellent anti-fouling properties for effective gravity-driven filtration of oil-in-water emulsions

The occurrence of membrane fouling has resulted in limited wastewater treatment applications. The development of superhydrophilic-underwater superoleophobic materials has received significant attention owing to their good anti-fouling properties. However, to fabricate such materials need costly regents and tedious steps. Thus, developing a one-step process to prepare a low-cost material for oil/water separation is still desired. In this study, bio-inspired from an arachnid, inorganic carbon nanotube stainless steel meshes (CNT@SSMs) having superhydrophilic-underwater superoleophobic and excellent anti-fouling properties and a unique fiber structure were fabricated via a one-step thermal chemical vapor deposition method. The CNT@SSMs had a small pore size enabling a high water flux of 10,639 L m^-2h^-1 and the separation of oily wastewater, including various emulsions, at a high rejection ratio of >98.89%. As a result of its excellent chemical stability under high temperatures, a broad pH range, and saline environments, the CNT@SSM has the potential to be used in extreme conditions. In summary, these CNT@SSMs are easy to fabricate and are low-cost as a result of inexpensive reagents involved. Moreover, these novel superwetting membranes are promising candidates for treatment of hazardous oily wastewater.

A new multi-tracer pellet injection for a simultaneous study of low- and mid/high-Z impurities in high-temperature plasmas

A new multi-tracer technique in the Tracer-Encapsulated Solid Pellet (TESPEL) method has been developed in order to acquire simultaneously the information about the behaviors of various impurities, i.e., to study concurrently the behaviors of low- and mid/high-Z impurities in magnetically confined high-temperature plasmas. In this new technique, an inorganic compound (for example, lithium titanate, Li₂TiO₃) is proposed to be used as a tracer embedded in the core of the TESPEL, instead of pure elements. The results of the proof-of-principle experiment clearly demonstrate the applicability of the new multi-tracer technique in the TESPEL method for the simultaneous study of behaviors of low- and mid/high-Z impurities in high-temperature plasmas.

Three-dimensional vectorcardiographic characteristics of breast cancer patients treated with chemotherapy

Funding Acknowledgements

Type of funding sources: None.

Background

 Patients receiving chemotherapy for breast cancer (BC) may develop cardiac electrophysiological abnormalities. The aim of this study is to examined possible alterations in cardiac electrophysiological parameters detected by three-dimensional vectorcardiograms (3D-VCGs) in BC patients who received chemotherapy.

Methods

This was a prospective single-center cohort study conducted. Patients with BC referred for chemotherapy from May 1, 2019, to October 1, 2019 were invited to participate in the study. 3D-VCG and echocardiography were recorded at rest four times (baseline, after the first cycle, after third cycles and at the end of the regimen, respectively). 

Results

 A total of 63 patients were included. Compared with baseline, decreases in 3-dimensional maximum T vector magnitude (TVM) (0.29 ± 0.10 vs. 0.25 ± 0.10mV; p &lt; 0.05) and 3-dimensional T/QRS ratio (0.26 ± 0.11 vs. 0.21 ± 0.11; p &lt; 0.05) were observed by the end of chemotherapy regimen, while echocardiographic parameters showed no significant variation before and after chemotherapy (all P &gt; 0.05). Maximum TVM showed a significant positive correlation with left ventricular ejection fraction (LVEF) (all p &lt; 0.05). Furthermore, the cut-off value with 0.23 of 3-dimensional T/QRS ratio (the area under the curve [AUC] 0.725) for differentiating LVEF reduction ≥10% following initiation of chemotherapy. The AUC of the front plane T/QRS ratio and horizontal plane T/QRS ratio for the detection of an LVEF reduction ≥10% was 0.725 and 0.763, respectively.

Conclusions

 3D-VCGs can be used to detect electrophysiological abnormalities in BC patients receiving chemotherapy. Subclinical cardiac dysfunction can be revealed by 3D-VCGs before alterations in traditional echocardiographic parameters.

Distance to water source in early childhood affects growth: a cohort study

OBJECTIVES

Approximately 165 million children aged <5 years are at risk of low height-for-age. This study explored whether water quality and distance to water source affected short- and long-term growth, and the critical time windows of such effects.

STUDY DESIGN

This study used data from the China Health and Nutrition Survey (CHNS), which was a cohort study performed in 15 Chinese provinces.

METHODS

Data from the CHNS between 1989 and 2011 were examined. Three cohorts of children who were enrolled at 0-2 years of age in 1989, 1993, and 2000 provided sufficient data for this study. Child height was measured by physicians, and household water supply, including the water quality (safe or unsafe) and distance to the source (in-yard or out-yard), was assessed using a questionnaire when the children were 0-2, 4-6, and 11-13 years of age. Multiple regressions were performed to analyse the associations between water quality and distance to the source at various ages, and height at that age and older ages, with and without adjusting for the household water supply at previous ages. Multiple informant models were created using a generalised estimating equation and these were used to assess whether the exposure coefficients were equal across the three age periods.

RESULTS

A total of 1192 children were included. Water quality was not significantly associated with height over the three age periods. An out-yard water source at the age of 0-2 years was not associated with child height at that age, but it was inversely associated with child height at ages 4-6 and 11-13 years (β = -1.605, 95% confidence interval [CI]: -2.490 to -0.720, and β = -2.817, 95% CI: -4.411 to -1.224, respectively), after adjusting for sociodemographic and economic covariates and baseline child height. Distance to the water source at age 4-6 and 11-13 years was not significantly associated with height. However, significant differences were observed in the associations between distance to water source across the three age periods and height at age 4-6 and 11-13 years (p_int = 0.064 and 0.069, respectively).

CONCLUSIONS

Distance to the water source in early, but not later, childhood exerted a long-term effect on child height. When the water quality is good, efforts should be made to shorten the distance to the source to improve child health and growth.

TiO2@HNTs Robustly Decorated PVDF Membrane Prepared by a Bioinspired Accurate-Deposition Strategy for Complex Corrosive Wastewater Treatment

As industrialization has spread all around the world, the problems of water pollution such as offshore oil spill and industrial sewage discharge have spread with it. Although many new separation materials have been successfully developed to deal with this crisis, a large number of water treatment materials only focus on the treatment of classified single water pollutant under mild conditions. It is a great challenge to treat soluble contaminants such as water-soluble dyes and insoluble contaminants, for example, emulsified oils simultaneously in a strong corrosive environment. Herein, in this work, corrosive resistance and multifunctional surface on a commercial polyvinylidene difluoride (PVDF) membrane via a tunicate-inspired gallic acid-assisted accurate-deposition strategy is created. Owing to the titanium-carboxylic coordination bonding and accurate-deposition strategy, the as-prepared membrane exhibits extraordinary stability, facing various harsh environmental challenges and incredibly corrosive situations (e.g., 4 M NaOH, 4 M HCl, and saturated NaCl solution). The robust multifunctional surface also endows commercial PVDF membrane with the ability for in situ separation and adsorption of surfactant-stabilized oil-in-water (corrosive and dyed) emulsions with high adsorption efficiencies up to 99.9%, separation efficiencies above 99.6%, and permeation flux as high as 15,698 ± 211 L/(m²·h·bar). Furthermore, the resultant membrane can be regenerated facilely and rapidly by flushing a small amount of HCl (4 M) or NaOH (4 M), making the corrosive resistance membrane attain a long-term and high-efficiency application for complex dyed wastewater treatment. Therefore, the multifunctional membrane has a broad application prospect in the industrial field.