Mesoporous silica nanoparticles: A versatile platform for encapsulation and delivery of essential oils for food applications

Essential oils (EOs) are biologically active and volatile substances that have found widespread applications in the food, cosmetics, and pharmaceutical industries. However, there are some challenges to their commercial utilization due to their high volatility, susceptibility to degradation, and hydrophobicity. In their free form, EOs can quickly evaporate, as well as undergo degradation reactions like oxidation, isomerization, dehydrogenation, or polymerization when exposed to light, heat, or air. Encapsulating EOs within mesoporous silica nanoparticles (MSNPs) could overcome these limitations and thereby broaden their usage. MSNPs may endow protection and slow-release properties to EOs, thereby extending their stability, enhancing their efficacy, and improving their dispersion in aqueous environments. This review explores and compares the design and development of different MSNP-based nanoplatforms to encapsulate, protect, and release EOs. Initially, a brief overview of the various types of available MSNPs, their properties, and their synthesis methods is given to better understand their roles as carriers for EOs. Several encapsulation technologies are then examined, including solvent-based and solvent-free methods. The suitability of each technology for EO encapsulation, as well as its impact on their stability and release, is discussed in detail. Opportunities and challenges for using EO-loaded MSNPs as preservatives, flavor enhancers, and antimicrobial agents in the food industry are then highlighted. Overall, this review aims to bridge a knowledge gap by providing a thorough understanding of EO encapsulation within MSNPs, which should facilitate the application of this technology in the food industry.

Constructing mesoporous biochar derived from waste carton: Improving multi-site adsorption of dye wastewater and investigating mechanism

The development of cost-efficient biochar adsorbent with a simple preparation method is essential to constructing efficient wastewater treatment system. Here, a low-cost waste carton biochar (WCB) prepared by a simple two-step carbonization was applied in efficiently removing Rhodamine B (RhB) in aqueous environment. The maximum ability of WCB for RhB adsorption was 222 mg/g, 6 and 10 times higher than both of rice straw biochar (RSB) and broadbean shell biochar (BSB), respectively. It was mainly ascribed to the mesopore structure (3.0-20.4 nm) of WCB possessing more spatial sites compared to RSB (2.2 nm) and BSB (2.4 nm) for RhB (1.4 nm✕1.1 nm✕0.6 nm) adsorption. Furthermore, external mass transfer (EMT) controlled mass transfer resistance (MTR) of the RhB sorption process by WCB which was fitted with the Langmuir model well. Meanwhile, the adsorption process was dominated by physisorption through van der Waals forces and π-π interactions. A mixture of three dyes in river water was well removed by using WCB. This work provides a straightforward method of preparing mesoporous biochar derived from waste carton with high-adsorption capacity for dye wastewater treatment.

Mesoporous graphitic carbon electrodes derived from boat-fruited shells of Sterculia Foetida for symmetric supercapacitors for energy storage applications

In recent years, intensive research efforts have focused on translating biomass waste into value-added carbon materials broadcasted for their significant role in energy and environmental applications. For the first time, high-performance carbonaceous materials for energy storage applications were developed from the multi-void structure of the boat-fruited shells of Sterculia Foetida (SF). In that view, synthesized mesoporous graphitic activated carbon (g-AC) via the combination of carbonization at various elevating temperatures of 700, 800, and 900 °C, respectively, and alkali activation by KOH, with a high specific surface area of 1040.5 m2 g-1 and a mesopore volume of 0.295 cm3 g-1. In a three-electrode configuration, the improved electrode (SF-K900) exhibited excellent electrochemical behavior, which was observed in an aqueous electrolyte (1 M H2SO4) with a high specific capacitance of 308.6 F/g at a current density of 1 A/g, owing to the interconnected mesopore structures and high surface area of SF-K900. The symmetric supercapacitor (SSC) delivered the specific capacitance of 138 F/g at 1 A/g with a high energy density (ED) of 13.4 Wh/kg at the power density (PD) of 24.12 kW/kg with remarkable cycle stability and supercapacitive retention of 93% over 5000 cycles. Based on the findings, it is possible to develop low-cost active electrode materials for high-rate performance SSC using mesoporous g-AC derived from SF boat-fruited shells.

Oxygen vacancies in MnOx regulating reaction kinetics for aqueous zinc-ion batteries

MnO2 cathode materials have presented challenges due to their poor conductivity, unstable structure, and sluggish diffusion kinetics for aqueous zinc-ion batteries (AZIBs). In this study, a nanostructured MnOx cathode material was synthesized using an acid etching method, Which introduced abundant Mn(III) sites, resulting in the formation of numerous oxygen vacancies. Comprehensive characterizations revealed that these oxygen vacancies facilitated the reversible adsorption/desorption of Zn2+ ions and promoted efficient electron transfer. In addition, the designed mesoporous structure offered ample active sites and shortened the diffusion path for Zn2+ and H+ ions. Consequently, the nanosized MnOx cathode exhibited enhanced reaction kinetics, achieving a considerable reversible specific capacity of 388.7 mAh/g at 0.1 A/g and superior durability with 72.0% capacity retention over 2000 cycles at 3.0 A/g. The material delivered a maximum energy density of 639.7 Wh kg-1 at 159.94 W kg-1. Furthermore, a systematic analysis of the zinc storage mechanism was performed. This work demonstrates that engineering oxygen vacancies with nanostructure regulation provides valuable insights into optimizing MnO2 cathode materials for AZIBs.

Oxygen vacancy engineering of mesoporous Bi-Fe2O3@NC multi-channel microspheres for remarkable oxygen reduction and aqueous/flexible Zn-air batteries

Designing multi-channel mesoporous structure and introducing oxygen vacancies to synergistically enhance oxygen reduction reaction (ORR) activity is crucial for the practical application of zinc-air batteries (ZABs) in the field of energy storage and conversion. Herein, a novel multi-channel mesoporous Bi-Fe2O3 microsphere with abundant oxygen vacancies supported on nitrogen-doped carbon (denoted as Bi-Fe2O3@NC) is constructed and the designated catalyst demonstrates a higher half-wave potential (0.88 V), large limiting current density (5.8 mA cm-2@0.4 V), and superior stability. Besides, the aqueous ZAB utilizing Bi-Fe2O3@NC cathode achieves a high power density of 198.6 mW cm-2 and maintains exceptional stability for 459 h at 5 mA cm-2, superior to most previously reported catalysts. Furthermore, a solid-state ZAB assembled with Bi-Fe2O3@NC shows a power density of 55.9 mW cm-2, highlighting its potential for flexible ZAB applications. The prominent ORR performance of Bi-Fe2O3@NC can be ascribed to its unique multi-channel mesoporous structure and abundant oxygen vacancies, which increase the exposure of active sites and facilitate efficient electron/mass transport. This work provides valuable insights for the rational design of advanced ORR catalysts for the practical requirements of aqueous/flexible ZABs in energy storage and conversion.

Bifunctional vanadium doped mesoporous Co3O4 on nickel foam towards highly efficient overall urea and water splitting in the alkaline electrolyte

Developing more active and stable electrode materials for oxygen evolution reaction (OER) and urea oxidation reaction (UOR) is necessary for electrocatalytic water and urea oxidation which can be used to generate hydrogen. Here, a low-cost vanadium-doped mesoporous cobalt oxide on Ni foam (V/meso-Co/NF) electrodes are obtained via the grouping of an in-situ citric acid (CA)-assisted evaporation-induced self-assembly (EISA) method and electrophoretic deposition process, and work as highly efficient and long-lasting electrocatalytic materials for OER/UOR. In particular, V/meso-Co/NF electrodes require 329 mV overpotential to maintain a 50 mA/cm2, with exceptional long-term durability of 30 h. Interestingly, V/meso-Co/NF also exhibits excellent electrocatalytic UOR performance, reaching 50 and 100 mA/cm2 versus RHE at low potentials of 1.34 and 1.35 V, respectively. By employing the V/meso-Co/NF materials as both the anode and cathode, this urea electrolysis assembly V/meso-Co/NF-5 (+,-) reaches current densities of 100 mA cm-2 at 1.62 V in KOH/urea, which is nearly 340 mV lesser than classical water electrolysis. The V/meso-Co/NF-5 electrocatalysts also exhibit remarkable durability for electrocatalytic OERs and UORs. The obtained findings revealed that the synthesized V/meso-Co/NF might be a promising electrode materials for overall urea-rich wastewater management and H2 generation from wastewater.

Degradation performance of methylene blue in metal nanoparticle modified 3D mesoporous wood microchannels

Wood has a rich three-dimensional pore structure and many bottom-up nanochannels. However, the structure of wood itself has limited ability to adsorb dyes, so the effective combination of the unique structure of wood and Pd NPs was studied to achieve efficient degradation of dyes. First, the three-dimensional structure of natural wood is optimized by combining the complex pore structure of wood with Pd NPs to improve the contact process between the dye and Pd NPs. Then, Pd (II) ion can be well reduced to Pd NPs by wood lignin. In addition, Pd NPs can be fixed by hydroxyl groups on cellulose in wood. The flow state inside Pd NPs/wood film and the contact area between catalyst and dye were discussed in detail by hydrodynamic simulation, which filled the gap. It provides reference for composite structure. When Pd NPs/wood membrane was used to treat methylene blue (MB), the degradation efficiency was up to 96.7%, which was 90% higher than that of natural wood. Its TOF value was 1.82 molMB molPd-1min-1, which was higher than that in the previous literature. Therefore, the novelty of this study is that the mechanism of catalytic degradation of MB by Pd nanoparticles/wood composites is reported for the first time. The internal flow mode and contact condition of the new material are understood, which has a good application prospect.

Controllable preparation of mesoporous spike gold nanocrystals for surface-enhanced Raman spectroscopy detection of micro/nanoplastics in water

Microplastics and nanoplastics are emerging classes of environmental contaminants that pose significant threats to human health. In particular, small nanoplastics (<1 μm) have drawn considerable attention owing to their adverse effects on human health; for example, nanoplastics have been found in the placenta and blood. However, reliable detection techniques are lacking. In this study, we developed a fast detection method that combines membrane filtration technology and surface-enhanced Raman spectroscopy (SERS), which can simultaneously enrich and detect nanoplastics with sizes as small as 20 nm. First, we synthesized spiked gold nanocrystals (Au NCs), achieving a controlled preparation of thorns ranging from 25 nm to 200 nm and regulating the number of thorns. Subsequently, mesoporous spiked Au NCs were homogeneously deposited on a glass fiber filter membrane to form an Au film as a SERS sensor. The Au-film SERS sensor achieved in-situ enrichment and sensitive SERS detection of micro/nanoplastics in water. Additionally, it eliminated sample transfer and prevented the loss of small nanoplastics. Using the Au-film SERS sensor, we detected 20 nm to 10 μm standard polystyrene (PS) microspheres with a detection limit of 0.1 mg/L. We also realized the detection of 100 nm PS nanoplastics at the 0.1 mg/L level in tap water and rainwater. This sensor provides a potential tool for rapid and susceptible on-site detection of micro/nanoplastics, especially small-sized nanoplastics.

Mesoporous silica coated core-shell nanoparticles substrate for size-selective SERS detection of chloramphenicol

With the growing popularity of the non-destructive technique, surface-enhanced Raman spectroscopy (SERS) demands a highly sensitive and reproducible plasmonic nanoparticles substrate. In this study, a novel bimetallic core-shell nanoparticles (Au@Ag@mSiO₂NP) substrate consisting of a gold core, silver shell, and a mesoporous silica coating was synthesized. The mesoporous coating structure was created by employing template molecules such as surfactant and their subsequent removal allowing selective screening based on the size of analyte molecules. Results showed that the plasmonic substrate could selectively enhance small molecules by preventing large macromolecules to reach the exciting zone of the substrate core, achieving the detection of chloramphenicol in milk samples with a detection limit of 6.68 × 10^-8 M. Moreover, the mesoporous coating provided additional stability to the Au@Ag nanoparticles, leading to the reusability of the substrate. Thus, this work offered a simple and smart Au@Ag@mSiO₂NP substrate for effective SERS detection of analytes.

Highly porous bio-glass scaffolds fabricated by polyurethane template method with hydrothermal treatment for tissue engineering uses

Objectives

Bioglass scaffolds, which contain a significant percentage of porosity for tissue engineering purposes, have low strength. For increasing the strength and efficiency of such structures for use in tissue engineering, fabrication of hierarchical meso/macro-porous bioglass scaffolds, developing their mechanical strength by hydrothermal treatment and adjusting pH method, and achieving the appropriate mesopore size for loading large biomolecules, were considered in this study.

Materials and Methods

Mesoporous bioglass (MBG) powders were synthesized using cetyltrimethylammonium bromide as a surfactant, with different amounts of calcium sources to obtain the appropriate size of the mesoporous scaffolds. Then MBG scaffolds were fabricated by a polyurethane foam templating method, and for increasing scaffold strength hydrothermal treatment (90 ^°C, for 5 days) and adjustment pH (pH=9) method was used to obtain hierarchical meso/macro-porous structures. The sample characterization was done by Simultaneous thermal analysis, Fourier transform infrared spectroscopy, Field Emission Scanning electron microscopy, small and wide-angle X-ray powder diffractions, transmission electron microscopy, and analysis of nitrogen adsorption-desorption isotherm. The mechanical strength of scaffolds was also determined.

Results

The MBG scaffolds based on 80.28 (wt.) % SiO₂- 17.89 (wt.) % CaO- 1.81 (wt.) % P₂O₅ presented interconnected large pores and pores in the range of 100-150 μm and 6-18 nm, respectively and 0.4 MPa compressive strength.

Conclusion

The total pore volume and specific surface area were obtained from the Brunauer-Emmett-Teller theory, 0.709 cm³ g^-1 and 213.83 m² g^-1, respectively. These findings could be considered in bone-cartilage tissue engineering.

Mesoporous poorly crystalline α-Fe2O3 with abundant oxygen vacancies and acid sites for ozone decomposition

In this work, mesoporous poorly crystalline hematite (α-Fe₂O₃) was prepared using mesoporous silica (KIT-6) functionalized with 3-[(2-aminoethyl)amino]propyltrimethoxysilane as a hard template (SMPC-α-Fe₂O₃). The disordered atomic arrangement structure of SMPC-α-Fe₂O₃ promoted the formation of oxygen vacancies, which was confirmed using X-ray photoelectron spectroscopy (XPS), O₂-temperature-programmed desorption (TPD), H₂-temperature-programmed reduction (TPR), and in situ diffuse reflectance infrared Fourier transform (DRIFT) analyses. Density functional theory calculations (DFT) also proved that reducing the crystallinity of α-Fe₂O₃ decreased the formation energy of oxygen vacancies. TPD and in situ DRIFT analyses of NH₃ adsorption suggested that the surface acidity of SMPC-α-Fe₂O₃ was considerably higher than those of mesoporous poorly crystalline α-Fe₂O₃ (MPC-α-Fe₂O₃) and highly crystalline α-Fe₂O₃ (HC-α-Fe₂O₃). The oxygen vacancies and acid sites formed on α-Fe₂O₃ surface are beneficial for ozone (O₃) decomposition. Compared with MPC-α-Fe₂O₃ and HC-α-Fe₂O₃, SMPC-α-Fe₂O₃ exhibited a higher removal efficiency for 200-ppm O₃ at a space velocity of 720 L g^-1 h^-1 at 25 ± 2 °C under dry conditions. Additionally, in situ DRIFT and XPS results suggested that the accumulation of peroxide (O₂^2-) and the conversion of O₂^2- to lattice oxygen over the oxygen vacancies caused catalyst deactivation. However, O₂^2- could be desorbed completely by continuous N₂ purging at approximately 350 °C. This study provides significant insights for developing highly active α-Fe₂O₃ catalysts for O₃ decomposition.

In-situ catalytic upgrading of bio-oil from rapid pyrolysis of biomass over hollow HZSM-5 with mesoporous shell

To solve the issue of narrow micropores in traditional protonic type Zeolite Socony Mobil-5 (HZSM-5) catalysts in the restricting of large-molecular reactants/products diffusion, hollow HZSM-5 with a mesoporous shell was prepared using a hydrothermal method combined with a tetrapropylammonium hydroxide (TPAOH) treatment process. Applying for in-situ catalyst upgrading of bio-oil from rapid pyrolysis of biomass, the obtained most efficient catalyst of Hollow(30)-TP resulted in aromatic hydrocarbon yields in the range of 78.49-78.67% for cellulose and hemicellulose, which is much greater than those using the traditional HZSM-5 (61.06-68.26%). Furthermore, in the case using real biomass (cedar) with an optimal biomass/catalyst weight ratio of 1:2, the aromatic hydrocarbon yield reached up to 80.16%. In addition, this catalyst exhibited excellent reusability and regeneration property due to the increased accessibility to the acid sites in the hollow HZSM-5 for the improving of the reaction rate as well as the reducing of coking.

Designing nanofibrous membrane with biomimetic caterpillar-like structured for highly-efficient and simultaneous removal of insoluble emulsified oils and soluble dyes towards sewage remediation

Purification of insoluble emulsified oils and soluble organic pollutants from sewage has attracted tremendous attention in today's society. Herein, a stable and environmentally friendly nanofibrous membrane with hierarchical caterpillar-like structure was fabricated via in-situ hydrothermal growing the nickel-cobalt layered double hydroxides (NiCo-LDHs) on tche polyacrylonitrile (PAN) electrospun nanofibers. The wrapped hydrophilic NiCo-LDHs constructed the hierarchical structure and endowed the membrane attractive superhydrophilicity (≈ 0°)/underwater superoleophobicity (≈ 161°) and enhanced oil-repellency performance. Meanwhile, the NiCo-LDH@PANI/oPAN NFMs can display the ultra-fast flux of SSEs (xylene/water emulsion, 4175 L m^-2 h^-1) and satisfactory separation efficiency (99.07%). Moreover, the introduction of positively charged NiCo-LDHs increased plentiful adsorption active sites for membranes, which is beneficial to demulsify ionic SSEs and adsorb organic pollutants. Finally, for simultaneous purification of complex sewage by the dead-end and cross-flow filtration experiment, the composite membrane both displayed splendid removal rate of oil (> 99.0%) and dyes (> 99.0%), robust regeneration recycle-ability and no secondary pollution. Hence, it is expected that such strategy of combining electrospun and chelating-assisted in-situ hydrothermal can provide a low energy consumption and high decontamination technology for severe environmental crisis.

Mesoporous CdxZn1-xS with abundant surface defects for efficient photocatalytic hydrogen production

The practical application of photocatalytic water splitting for hydrogen evolution hinges on the development of high-efficient and low-cost photocatalysts. Defects engineering has emerged as a promising strategy to enhance photocatalytic activity effectively. Herein, a facile and versatile co-precipitation method is proposed to fabricate mesoporous Cd-Zn-S solid solutions (E-Cd_xZn_1-xS) with abundant surface defects by the inorganic salts formed in the reaction system as self-template. Compared with Cd-Zn-S solid solutions (W-Cd_0.65Zn_0.35S) prepared by the traditional co-precipitation method, the enhanced specific surface area and abundant surface defects endow E-Cd_0.65Zn_0.35S with more accessible active sites and effective separation of electron-hole pairs for the photocatalytic water splitting reaction. The E-Cd_0.65Zn_0.35S solid solution exhibits hydrogen evolution rate of 5.2 mmol h^-1 g^-1 without loading noble metal as cocatalyst under visible light, which is 1.13 times higher than that of W-Cd_0.65Zn_0.35S sample. The present work provides a simple, low-cost and prospective strategy for the synthesis of defective Cd-Zn-S solid solutions, and it also delivers guidance to design and develop the advanced visible-light photocatalyst in the future.

Targeted immobilization of titanium (IV) on magnetic mesoporous nanomaterials derived from metal-organic frameworks for high-efficiency phosphopeptide enrichment in biological samples

A selectively modified porous metal/carbon nanocomposite was fabricated to enhance the enrichment of low-abundance phosphopeptides from biological samples. The carbon matrix derived from the metal-organic framework provides a suitable pore size to allow the diffusion of peptides, while the deliberately modified metal nanoparticles within the pores enhance their interaction with the phosphopeptides. This nanocomposite shows extremely high enrichment selectivity for phosphopeptides in the MALDI-TOF MS detection, even when the molar ratio of α-casein digests versus bovine serum albumin digests was up to about 1:20,000. By combining such nanocomposite with nano-LC-MS/MS, 4556 unique phosphopeptides were identified with high selectivity (95.2%) from HeLa cell extracts. Furthermore, phosphopeptides from prostate tissue digests were also determined. A total of 277 and 1242 phosphopeptides were identified from normal and tumor tissues of a patient with prostate cancer, respectively. This indicates that phosphorylation and prostate cancer can be related to each other.

Molecularly imprinted mesoporous silica incorporating C3N4 dots and CdTe quantum dots as ratiometric fluorescent probe for determination of Malachite Green

A new dual-emission ratiometric fluorescent probe was synthesized and successfully used for the determination of Malachite Green (MG) in fish farming water. The ratiometric fluorescent probe was successfully composited by sol-gel method using C₃N₄ and CdTe quantum dots as fluorescent materials combined with mesoporous molecularly imprinted polymers. MG quenches the red fluorescence of the CdTe QDs (with excitation/emission wavelengths at 350/680 nm) while the blue fluorescence of C₃N₄ (with excitation/emission wavelengths at 350/458 nm) remains unchanged. The change of fluorescence color and fluorescence intensity ratio can be successfully used for quantification of malachite green. In addition, the mesoporous structure has a large surface and good adsorption capacity for malachite green. The normalized intensity of fluorescence increases linearly in the 50-1000 ng·mL^-1 MG concentration range, and the detection limit is 10 ng·mL^-1. The imprinting factor is 3.2. The nanoprobe was applied to the determination of MG in fish farming water samples. Recoveries and relative standard deviations were 92.5-97.8% and 2.5-6.2%, respectively. Graphical abstract Schematic representation of synthesis of molecularly imprinted mesoporous silica ratiometric fluorescent probes incorporating C₃N₄ dots and CdTe quantum dots for determination of malachite green.

Preferable phosphate removal by nano-La(III) hydroxides modified mesoporous rice husk biochars: Role of the host pore structure and point of zero charge

Immobilizing La(OH)₃ nanoparticles (NPs) to porous hosts has been widely applied to inhibiting their inherent aggregation as well as the subsequent low utilization efficiency of La. In this study, a series of rice husk biochars (RHBCs) with high mesoporous rates were prepared and the effects of host pore structure and point of zero charge (pH_pzc) on phosphate adsorption by La-modified RHBCs was particularly focused. Characterization results confirmed that La(OH)₃ NPs were both confined in the pore channel and external surface of RHBCs. Adsorption kinetics and isotherms showed that La-modified RHBCs with higher mesoporous rates of the host showed a faster adsorption rate and La-modified RHBCs exhibited superior La utilization efficiency than many reported La-incorporated adsorbents. Phosphate could be effectively captured over a wide pH of 3-10 due to the high pH_pzc of La-modified RHBCs. Moreover, the La-modified RHBCs showed satisfactory affinity towards phosphate in the presence of coexisting anions and the phosphate adsorption by La-RHBC₉ was enhanced in the presence of Ca²⁺, while it was inhibited in the presence of Mg²⁺. The mesoporous structure of RHBCs strengthened the stability of La-modified RHBCs and weakened the inhibition of coexisting humic substances on phosphate adsorption through the "shielding effect".

Kinetic, equilibrium, and thermodynamic studies on the adsorption of ciprofloxacin by activated carbon produced from Jerivá (Syagrus romanzoffiana)

High specific surface area activated carbon prepared from endocarp of Jerivá (Syagrus romanzoffiana) (ACJ) was used for ciprofloxacin (CIP) antibiotic removal from aqueous effluents. The activated carbon (AC) was characterized via scanning electron microscope, Fourier transform infrared spectroscopy, N₂ adsorption/desorption, and pH value at the zero-charge point. Avrami kinetic model was the one that best fit the experimental results in comparison to the pseudo-first-order and pseudo-second-order kinetic models. The equilibrium data obeyed the Liu isotherm equation, showing a maximum adsorption capacity of 335.8 mg g^-1 at 40 °C. The calculated thermodynamic parameters indicate that the adsorption of CIP was spontaneous and endothermic at all studied temperatures. Also, the free enthalpy changes (∆H° = 3.34 kJ mol^-1) suggested physical adsorption between CIP and ACJ. Simulated effluents were utilized to check the potential of the ACJ for wastewater purification. The highly efficient features enable the activated carbon prepared from endocarp of Jerivá, an attractive carbon adsorbent, to remove ciprofloxacin from wastewaters.

Niobium doped tungsten oxide mesoporous film with enhanced electrochromic and electrochemical energy storage properties

Exploring high performance cathode materials is of great means for the development of bi-functional electrochromic energy storage devices. Herein, Nb-doped WO₃ mesoporous films as integrated high-quality cathode are successfully constructed via a facile sol-gel method. Chemical state and crystallinity of the WO₃ based films are significantly influenced by doping concentration. Compared with the pure WO₃, the optimal Nb-doped film shows improved optical-electrochemical properties with high specific capacity (74.4 mAh g^-1 at 2 A g^-1), excellent high-rate capability, large optical contrast (61.7% at 633 nm), and ultra-fast switching speed (3.6 s and 2.1 s for coloring and bleaching process, respectively). These positive features suggest the potential application of Nb-doped WO₃ mesoporous cathode. Our research paves the way for the development of multifunctional photoelectrochemical energy devices.

Two-Dimensional VO2 Mesoporous Microarrays for High-Performance Supercapacitor

Two-dimensional (2D) mesoporous VO₂ microarrays have been prepared using an organic-inorganic liquid interface. The units of microarrays consist of needle-like VO₂ particles with a mesoporous structure, in which crack-like pores with a pore size of about 2 nm and depth of 20-100 nm are distributed on the particle surface. The liquid interface acts as a template for the formation of the 2D microarrays, as identified from the kinetic observation. Due to the mesoporous structure of the units and high conductivity of the microarray, such 2D VO₂ microarrays exhibit a high specific capacitance of 265 F/g at 1 A/g and excellent rate capability (182 F/g at 10 A/g) and cycling stability, suggesting the effect of unique microstructure for improving the electrochemical performance.

An efficient adsorption of indigo carmine dye from aqueous solution on mesoporous Mg/Fe layered double hydroxide nanoparticles prepared by controlled sol-gel route

A new approach for removal of indigo carmine blue (IC) dye which is extensively used in jeans manufacture was successfully performed on novel mesoporous [LDH] nanoparticles prepared by sol-gel route using CTAB as shape and pore directing agent. The physicochemical features were monitored by X-ray diffraction (XRD), Fourier transformer infra-red (FTIR), N₂ adsorption-desorption isotherm, Field emission electron microscope (FESEM) and high resolution transmission electron microscope (HRTEM). The influence of reaction parameters affecting dye adsorption including contact time, initial dye concentration, pH and temperature were investigated. Textural analysis and HRTEM images indicate the existence of mesoporous spherical nanoparticles of size = 26 nm connected to each other's and embedded large numbers of mesopores of average pore radius = 43.5 Å. A successful adsorption of IC on LDH nanoparticles of surface area = 85.6 m²/g at various pH with maximum adsorption capacity = 62.8 mg/g at pH = 9.5. Langmuir model is more favorable to describe the adsorption of IC rather than Freundlich model which reflecting the preferential formation of monolayer on the surface of LDH. Both film diffusion and the intraparticle diffusion affect the dye adsorption. The values of enthalpy change (ΔH) for and (ΔS) are + 28.18 and + 0.118 kJ/mol, respectively indicating that the removal process is endothermic. The results indicated that LDH nanoparticles conserved a good activity even after five consecutive cycles of reuse. Our results suggest that mesoporous LDH nanoparticles are considered a potential novel adsorbent for remediation of wastewater containing IC.

Unique and facile solvothermal synthesis of mesoporous WO3 using a solid precursor and a surfactant template as a photoanode for visible-light-driven water oxidation

Mesoporous tungsten trioxide (WO3) was prepared from tungstic acid (H2WO4) as a tungsten precursor with dodecylamine (DDA) as a template to guide porosity of the nanostructure by a solvothermal technique. The WO3 sample (denoted as WO3-DDA) prepared with DDA was moulded on an electrode to yield efficient performance for visible-light-driven photoelectrochemical (PEC) water oxidation. Powder X-ray diffraction (XRD) data of the WO3-DDA sample calcined at 400°C indicate a crystalline framework of the mesoporous structure with disordered arrangement of pores. N2 physisorption studies show a Brunauer-Emmett-Teller (BET) surface area up to 57 m(2) g(-1) together with type IV isotherms and uniform distribution of a nanoscale pore size in the mesopore region. Scanning electron microscopy (SEM) images exhibit well-connected tiny spherical WO3 particles with a diameter of ca. 5 to 20 nm composing the mesoporous network. The WO3-DDA electrode generated photoanodic current density of 1.1 mA cm(-2) at 1.0 V versus Ag/AgCl under visible light irradiation, which is about three times higher than that of the untemplated WO3. O2 (1.49 μmol; Faraday efficiency, 65.2%) was evolved during the 1-h photoelectrolysis for the WO3-DDA electrode under the conditions employed. The mesoporous electrode turned out to work more efficiently for visible-light-driven water oxidation relative to the untemplated WO3 electrode.

Low temperature biosynthesis of Li2O-MgO-P2O5-TiO2 nanocrystalline glass with mesoporous structure exhibiting fast lithium ion conduction

We demonstrate a biomimetic synthesis methodology that allows us to create Li2O-MgO-P2O5-TiO2 nanocrystalline glass with mesoporous structure at lower temperature. We design a 'nanocrystal-glass' configuration to build a nanoarchitecture by means of yeast cell templates self-assembly followed by the controlled in-situ biomineralization of materials on the cell wall. Electrochemically active nanocrystals are used as the lamellar building blocks of mesopores, and the semiconductive glass phase can act both as the 'glue' between nanocrystals and functionalized component. The Li2O-MgO-P2O5-TiO2 nanocrystalline glass exhibits outstanding thermal stability, high conductivity and wide potential window. This approach could be applied to many other multicomponent glass-ceramics to fabricate mesoporous conducting materials for solid-state lithium batteries.