Stress hyperglycemia ratio and long-term prognosis in patients with acute coronary syndrome: A multicenter, nationwide study

BACKGROUND

Stress hyperglycemia ratio (SHR), a novel biomarker of stress hyperglycemia, was proved to be a reliable predictor of short-term adverse outcomes in patients with acute coronary syndromes (ACS). However, its impact on long-term prognosis remained controversial.

METHODS

A total of 7662 patients with ACS from a large nationwide prospective cohort between January 2015 and May 2019 were included. SHR was calculated by the following formula: SHR = admission glucose (mmol/L)/(1.59 × HbA1c [%]-2.59). The primary end point was a major adverse cardiovascular event (MACE) during follow-up, a composite of all-cause death, myocardial infarction, and unplanned revascularization. The second end point was the separate components of the primary end points.

RESULTS

During a median follow-up of 2.1 years, 779 MACE events occurred. After multivariable adjustment, ACS patients with the highest SHR tertile were significantly associated with increased long-term risks of MACE (hazard ratio [HR] 1.53, 95% confidence interval [CI] 1.24-1.88), all-cause death (HR 1.80, 95% CI 1.29-2.51) and unplanned revascularization (HR 1.44, 95% CI 1.09-1.91). Although significant associations between the highest SHR tertile and risks of MACE and all-cause death were assessed in both diabetic and nondiabetic patients, the patterns of risk were different in these two groups.

CONCLUSION

Elevated SHR was independently associated with a higher risk of long-term outcomes irrespective of diabetic status, suggesting that SHR was a potential biomarker for risk stratification after ACS.

Dual-Phase Inspired Soft Electronic Sensors with Programmable and Tunable Mechanical Properties

Wearable and stretchable sensors are important components to strictly monitor the behavior and health of humans and attract extensive attention. However, traditional sensors are designed with pure horseshoes or chiral metamaterials, which restrict the biological tissue engineer applications due to their narrow regulation ranges of the elastic modulus and the poorly adjustable Poisson's ratio. Inspired by the biological spiral microstructure, a dual-phase metamaterial (chiral-horseshoes) is designed and fabricated in this work, which possesses wide and programmable mechanical properties by tailoring the geometrical parameters. Experimental, numerical, and theoretical studies are conducted, which reveal that the designed microstructures can reproduce mechanical properties of most natural animals such as frogs, snakes, and rabbits skin. Furthermore, a flexible strain sensor with the gauge factor reaching 2 under 35% strain is fabricated, which indicates that the dual-phase metamaterials have a stable monitoring ability and can be potentially applied in the electronic skin. Finally, the flexible strain sensor is attached on the human skin, and it can successfully monitor the physiological behavior signals under various actions. In addition, the dual-phase metamaterial could combine with artificial intelligence algorithms to fabricate a flexible stretchable display. The dual-phase metamaterial with negative Poisson's ratio could decrease the lateral shrinkage and image distortion during the stretching process. This study offers a strategy for designing the flexible strain sensors with programmable, tunable mechanical properties, and the fabricated soft and high-precision wearable strain sensor can accurately monitor the skin signals under different human motions and potentially be applied for flexible display.

Fate mapping RNA-sequencing reveal Malat1 regulates Sca1+ progenitor cells to vascular smooth muscle cells transition in vascular remodeling

Regeneration of smooth muscle cells (SMCs) is vital in vascular remodeling. Sca1⁺ stem/progenitor cells (SPCs) can generate de novo smooth muscle cells after severe vascular injury during vessel repair and regeneration. However, the underlying mechanisms have not been conclusively determined. Here, we reported that lncRNA Metastasis-associated lung adenocarcinoma transcript 1 (Malat1) was down-regulated in various vascular diseases including arteriovenous fistula, artery injury and atherosclerosis. Using genetic lineage tracing mice and veingraft mice surgery model, we found that suppression of lncRNA Malat1 promoted Sca1⁺ cells to differentiate into SMCs in vivo, resulting in excess SMC accumulation in neointima and vessel stenosis. Genetic ablation of Sca1⁺ cells attenuated venous arterialization and impaired vascular structure normalization, and thus, resulting in less Malat1 down-regulation. Single cell sequencing further revealed a fibroblast-like phenotype of Sca1⁺ SPCs-derived SMCs. Protein array sequencing and in vitro assays revealed that SMC regeneration from Sca1⁺ SPCs was regulated by Malat1 through miR125a-5p/Stat3 signaling pathway. These findings delineate the critical role of Sca1⁺ SPCs in vascular remodeling and reveal that lncRNA Malat1 is a key regulator and might serve as a novel biomarker or potential therapeutic target for vascular diseases.

Prevalence and Prognostic Significance of Malnutrition in Patients with Abnormal Glycemic Status and Coronary Artery Disease: A Multicenter Cohort Study in China

This study sought to investigate the prevalence and prognostic significance of malnutrition in patients with an abnormal glycemic status and coronary artery disease (CAD). This secondary analysis of a multicenter prospective cohort included 5710 CAD patients with prediabetes and 9328 with diabetes. Four objective tools were applied to assess the nutritional status of the study population. The primary endpoint was all-cause death. The association of malnutrition with clinical outcomes was examined using Cox proportional hazards regression. The proportion of malnutrition varied from 8% to 57% across the assessment tools. Diabetic patients were more likely to be malnourished than prediabetic patients. During a median follow-up of 2.1 years, 456 all-cause deaths occurred. The adjusted hazard ratios and 95% confidence interval for all-cause deaths of moderate-severe malnutrition defined by different tools ranged from 1.59 (1.03, 2.46) to 2.08 (0.92, 4.73) in prediabetic patients and 1.51 (1.00, 2.34) to 2.41 (1.78, 3.27) in diabetic patients. In conclusion, malnutrition is not rare in CAD patients with abnormal glycemic status. Moderate-severe malnutrition strongly predicted all-cause death regardless of the assessment tool. Assessing the nutritional status for all CAD patients with prediabetes and diabetes to identify individuals at high risk of all-cause death may help the risk assessment and prognosis improvement.

Mechanistic Insights into the Cu(II)/DBU-Catalyzed Incorporation of CO2 into Homopropargylic Amines

The mechanisms of Cu(II)/DBU-catalyzed carboxylation of homopropargylic amines with CO2 construct 6-methylene-1,3-oxazin-2-ones are studied using the density functional theory. The calculations suggest that Cu(II) catalysts exhibit the positive effect on...

Multilineage commitment of Sca-1+ cells in reshaping vein grafts

Vein graft failure remains a significant clinical problem. Similar to other vascular diseases, stenosis of vein grafts is caused by several cell lines; however, the sources of these cells remain unclear. The objective of this study was to investigate the cellular sources that reshape vein grafts. By analyzing transcriptomics data and constructing inducible lineage-tracing mouse models, we investigated the cellular components of vein grafts and their fates. The sc-RNAseq data suggested that Sca-1+ cells were vital players in vein grafts and might serve as progenitors for multilineage commitment. By generating a vein graft model in which the venae cavae from C57BL/6J wild-type mice were transplanted adjacent to the carotid arteries of Sca-1(Ly6a)-CreERT2; Rosa26-tdTomato mice, we demonstrated that the recipient Sca-1+ cells dominated reendothelialization and the formation of adventitial microvessels, especially at the perianastomotic regions. In turn, using chimeric mouse models, we confirmed that the Sca-1+ cells that participated in reendothelialization and the formation of adventitial microvessels all had a non-bone-marrow origin, whereas bone-marrow-derived Sca-1+ cells differentiated into inflammatory cells in vein grafts. Furthermore, using a parabiosis mouse model, we confirmed that non-bone-marrow-derived circulatory Sca-1+ cells were vital for the formation of adventitial microvessels, whereas Sca-1+ cells derived from local carotid arteries were the source of endothelium restoration. Using another mouse model in which venae cavae from Sca-1 (Ly6a)-CreERT2; Rosa26-tdTomato mice were transplanted adjacent to the carotid arteries of C57BL/6J wild-type mice, we confirmed that the donor Sca-1+ cells were mainly responsible for smooth muscle cells commitment in the neointima, particularly at the middle bodies of vein grafts. In addition, we provided evidence that knockdown/knockout of Pdgfrα in Sca-1+ cells decreased the cell potential to generate SMCs in vitro and decreased number of intimal SMCs in vein grafts. Our findings provided cell atlases of vein grafts, which demonstrated that recipient carotid arteries, donor veins, non-bone-marrow circulation, and the bone marrow provided diverse Sca-1+ cells/progenitors that participated in the reshaping of vein grafts.

Globular adiponectin-mediated vascular remodeling by affecting the secretion of adventitial-derived tumor necrosis factor-α induced by urotensin II

OBJECTIVES

In this study, we explored how adiponectin mediated urotensin II (UII)‍-induced tumor necrosis factor-‍α (TNF-‍α) and α‍-smooth muscle actin (α‍-SMA) expression and ensuing intracellular signaling pathways in adventitial fibroblasts (AFs).

METHODS

Growth-arrested AFs and rat tunica adventitia of vessels were incubated with UII and inhibitors of signal transduction pathways for 1‍‒‍24 h. The cells were then harvested for TNF-α receptor (TNF-‍α-R) messenger RNA (mRNA) and TNF-‍α protein expression determination by reverse transcription-polymerase chain reaction (RT-PCR) and enzyme-linked immunosorbent assay (ELISA), respectively. Adiponectin and adiponectin receptor (adipoR) expression was measured by RT-PCR, quantitative real-time PCR (qPCR), immunohistochemical analysis, and cell counting kit-8 (CCK-8) cell proliferation experiments. We then quantified TNF-α and α-SMA mRNA and protein expression levels by qPCR and immunofluorescence (IF) staining. RNA interference (RNAi) was used to explore the function of the adipoR genes. To investigate the signaling pathway, we applied western blotting (WB) to examine phosphorylation of adenosine 5'-monophosphate (AMP)‍-activated protein kinase (AMPK). In vivo, an adiponectin (APN)‍-knockout (APN-KO) mouse model mimicking adventitial inflammation was generated to measure TNF-α and α‍-SMA expression by application of qPCR and IF, with the goal of gaining a comprehensive atlas of adiponectin in vascular remodeling.

RESULTS

In both cells and tissues, UII promoted TNF-α protein and TNF-α-R secretion in a dose- and time-dependent manner via Rho/protein kinase C (PKC) pathway. We detected marked expression of adipoR1, T-cadherin, and calreticulin as well as a moderate presence of adipoR2 in AFs, while no adiponectin was observed. Globular adiponectin (gAd) fostered the growth of AFs, and acted in concert with UII to induce α-SMA and TNF-α through the adipoR1/T-cadherin/calreticulin/AMPK pathway. In AFs, gAd and UII synergistically induced AMPK phosphorylation. In the adventitial inflammation model, APN deficiency up-regulated the expression of α-SMA, UII receptor (UT), and UII while inhibiting TNF-‍α expression.

CONCLUSIONS

From the results of our study, we can speculate that UII induces TNF‍-‍α protein and TNF-‍α‍-R secretion in AFs and rat tunica adventitia of vessels via the Rho and PKC signal transduction pathways. Thus, it is plausible that adiponectin is a major player in adventitial progression and could serve as a novel therapeutic target for cardiovascular disease administration.

The AIM2 inflammasome: A novel biomarker and target in cardiovascular disease

Absent in melanoma 2 (AIM2) is a cytoplasmic sensor that recognises the double-strand DNA. AIM2 inflammasome is a protein platform in the cell that initiates innate immune responses by cleaving pro-caspase-1 and converting IL-1β and IL-18 to their mature forms. Additionally, AIM2 inflammasome promotes pyroptosis by converting Gasdermin-D (GSDMD) to GSDMD-N fragments. An increasing number of studies have indicated the important and decisive roles of the AIM2 inflammasome, IL-1β, and pyroptosis in cardiovascular diseases, such as coronary atherosclerosis, myocardial infarction, ischaemia/reperfusion injury, heart failure, aortic aneurysm and ischaemic stroke. Here, we review the molecular mechanism of the activation and effect of the AIM2 inflammasome in cardiovascular disease, revealing new insights into pathogenic factors that may be targeted to treat cardiovascular disease and related dysfunctions.

Causal associations between CD40/CD40L and aortic diseases: A mendelian randomization study

Background: CD40 and CD40L have been reported as associated with aortic dissection (AD) and aortic aneurysm (AA), but the causality of the associations has not been established yet. Methods: We conducted a two-sample Mendelian randomization (MR) study to assess the causal inference between CD40/CD40L and aortic diseases including AD and AA. The instrumental variables (IVs) for CD40 and CD40L were selected from a high-quality protein quantitative trait loci dataset released by a genomic study involving 30,931 individuals of European ancestry. The genome-wide association studies summary statistics for AD and AA were from the FinnGen Release 7, with 288638 controls for all outcomes of interests, 680 cases for AD and 6,092 cases for AA, also from European ancestry. For AA subtypes, there were 5,881 cases of thoracic AA (TAA) and 2,434 cases of abdominal AA (AAA) respectively. Inverse-variance weighted and Wald ratio were applied for calculating causal estimates. Horizontal pleiotropy and heterogeneity were assessed using MR-Egger regression analysis and Cochran Q test, respectively. Leave-one-out analyses were further performed. Results: Three single-nucleotide polymorphisms (SNPs) for CD40 and one SNP for CD40L were selected as IVs. We found genetic proxied CD40 levels inversely associated with the risk of AD (odds ratio [OR]: 0.777, 95% confidence interval [CI]: 0.618-0.978, p = 0.031) and AA (OR: 0.905, 95% CI: 0.837-0.978, p = 0.012), consistent across TAA (both p < 0.050). There were trends of increased risks of AD and AA in the presence of CD40L while not reaching statistical significance. No significant horizontal pleiotropy or heterogeneity was observed. Conclusion: Our MR study provides evidence supporting the causal association between CD40 and the reduced risks of both AD and AA.

Lack of causal association between heart failure and osteoporosis: a Mendelian randomization study

Objectives

Heart failure (HF) has been implicated in osteoporosis. However, causality remains unestablished. Here, we sought to assess causal associations of genetic liability to HF with osteoporosis using Mendelian randomization (MR) analyses.

Methods

Independent single nucleotide polymorphisms associated with HF at genome-wide significance were derived from a large genome-wide association study (GWAS) (including up to 977,323 individuals). We obtained summary statistics for forearm (FA) bone mineral density (BMD) (n = 8,143), femoral neck (FN) BMD (n = 32,735), lumbar spine (LS) BMD (n = 28,498), heel (HE) BMD (n = 426,824), and fracture (n = 1,214,434) from other GWAS meta-analyses. Inverse variance weighted (IVW) and several supplementary methods were performed to calculate the MR estimates.

Results

Genetically determined HF has no causal effect on FA-BMD (odds ratio (OR) 1.17; 95% confidence interval (CI) 0.82, 1.66; P = 0.389), FN-BMD (OR 1.01; 95% CI 0.85, 1.19; P = 0.936), LS-BMD (OR 0.96; 95% CI 0.80, 1.17; P = 0.705), HE-BMD (OR 1.01; 95% CI 0.90, 1.13; P = 0.884), and fracture risk (OR 1.00; 95% CI 0.92, 1.10; P = 0.927). Complementary analyses returned broadly consistent results.

Conclusion

This MR study provides genetic evidence that HF may not lead to an increased risk of reduced BMDs or fracture.

Supplementary Information

The online version contains supplementary material available at 10.1186/s12920-022-01385-8.

A BCI painting system using a hybrid control approach based on SSVEP and P300

Brain-computer interfaces (BCIs) can help people with disabilities to communicate with others, express themselves, and even create art. In this paper, a BCI painting system using a hybrid control approach based on steady-state visual evoked potential (SSVEP) and P300 was developed, which can enable simple painting through brain-controlled painting tools. The BCI painting system is composed of two parts: a hybrid stimulus interface and a hybrid electroencephalogram (EEG) signal processing module. The user selects the menus and tools through the SSVEP and P300 stimulus matrices, respectively, and the paintings are displayed in the canvas area of the hybrid stimulus interface in real time. Twenty subjects participated in this study. An offline training experiment was performed to construct the P300 and SSVEP recognition models for each subject; an online painting experiment, which included a copy-painting task and a free-painting task, was performed to evaluate the BCI painting system. The results of the online painting experiment showed that the average tool selection accuracy (88.92 ± 3.94%) of the BCI painting system using the hybrid stimulus interface was slightly higher than that of the traditional brain painting system based on the P300 stimulus interface; the average information transfer rate (ITR) (74.20 ± 5.28 bpm, 71.80 ± 5.15 bpm) in the copy-painting and free-painting tasks of the BCI painting system was significantly higher than that of the traditional brain painting system. Our BCI painting system can effectively help users express their artistic creativity and improve their painting efficiency, and can provide new methods and new ideas for developing BCI-controlled applications.

Dynamic and static biomechanical traits of cardiac fibrosis

Cardiac fibrosis is a common pathology in cardiovascular diseases which are reported as the leading cause of death globally. In recent decades, accumulating evidence has shown that the biomechanical traits of fibrosis play important roles in cardiac fibrosis initiation, progression and treatment. In this review, we summarize the four main distinct biomechanical traits (i.e., stretch, fluid shear stress, ECM microarchitecture, and ECM stiffness) and categorize them into two different types (i.e., static and dynamic), mainly consulting the unique characteristic of the heart. Moreover, we also provide a comprehensive overview of the effect of different biomechanical traits on cardiac fibrosis, their transduction mechanisms, and in-vitro engineered models targeting biomechanical traits that will aid the identification and prediction of mechano-based therapeutic targets to ameliorate cardiac fibrosis.

Stretchable Sensors and Electro-Thermal Actuators with Self-Sensing Capability Using the Laser-Induced Graphene Technology

Laser-induced graphene (LIG) represents a fast-speed and low-cost method to prepare the customizable graphene-based patterns in complex configurations with exceptional electrical performance. This paper presents the applications of LIG formed on the commercial polyimide (PI) film as the stretchable strain sensor and electrical-actuated actuators. First, the conductive performances of the LIG were systematically revealed under different fabrication conditions via investigating the effects of processing parameters, and the fluence of the laser was experimentally demonstrated as the only crucial parameter to evaluate the LIG formation, facilitating the selection of optimized manufacturing parameters to prepare the LIG with desired electrical performances. Then, the LIG-based strain sensor which can undergo over 50% tensile strain was fabricated by transfer of the LIG from the PI film to polydimethylsiloxane. The variety of LIG-based electro-thermal actuators to achieve pre-designed 3D architectures was presented, along with their parameter analysis. After incorporating the multimeter system, the actuator can even feedback its transformation from 2D precursor to 3D architecture by monitoring the resistance variation of LIG, revealing the integrated capability of our design in serving as sensors and actuators. Finally, the wearable glove with the LIG sensors was presented to demonstrate its ability to remotely control the soft robotic hand.

Progesterone Receptor Modulates Extraembryonic Mesoderm and Cardiac Progenitor Specification during Mouse Gastrulation

Progesterone treatment is commonly employed to promote and support pregnancy. While maternal tissues are the main progesterone targets in humans and mice, its receptor (PGR) is expressed in the murine embryo, questioning its function during embryonic development. Progesterone has been previously associated with murine blastocyst development. Whether it contributes to lineage specification is largely unknown. Gastrulation initiates lineage specification and generation of the progenitors contributing to all organs. Cells passing through the primitive streak (PS) will give rise to the mesoderm and endoderm. Cells emerging posteriorly will form the extraembryonic mesodermal tissues supporting embryonic growth. Cells arising anteriorly will contribute to the embryonic heart in two sets of distinct progenitors, first (FHF) and second heart field (SHF). We found that PGR is expressed in a posterior–anterior gradient in the PS of gastrulating embryos. We established in vitro differentiation systems inducing posterior (extraembryonic) and anterior (cardiac) mesoderm to unravel PGR function. We discovered that PGR specifically modulates extraembryonic and cardiac mesoderm. Overexpression experiments revealed that PGR safeguards cardiac differentiation, blocking premature SHF progenitor specification and sustaining the FHF progenitor pool. This role of PGR in heart development indicates that progesterone administration should be closely monitored in potential early-pregnancy patients undergoing infertility treatment.

Frailty index and risk of cardiovascular diseases: a mendelian randomization study

Background

Methods

Results

Conclusions

Mitochondrial dysfunction in heart failure and its therapeutic implications

The ATP consumption in heart is very intensive to support muscle contraction and relaxation. Mitochondrion is the power plant of the cell. Mitochondrial dysfunction has long been believed as the primary mechanism responsible for the inability of energy generation and utilization in heart failure. In addition, emerging evidence has demonstrated that mitochondrial dysfunction also contributes to calcium dysregulation, oxidative stress, proteotoxic insults and cardiomyocyte death. These elements interact with each other to form a vicious circle in failing heart. The role of mitochondrial dysfunction in the pathogenesis of heart failure has attracted increasing attention. The complex signaling of mitochondrial quality control provides multiple targets for maintaining mitochondrial function. Design of therapeutic strategies targeting mitochondrial dysfunction holds promise for the prevention and treatment of heart failure.

Protective Effects of Circulating TIMP3 on Coronary Artery Disease and Myocardial Infarction: A Mendelian Randomization Study

Tissue inhibitor of metalloproteinase 3 (TIMP3) is a protease with high expression levels in the heart and plays an essential role in extracellular matrix turnover by maintaining equilibrium with matrix metalloproteinases. Considerable data in experimental models have demonstrated a protective role of TIMP3 in coronary artery disease (CAD) and myocardial infarction (MI). However, causality remains unexplored in population studies. Here, we sought to decipher the potential causality between TIMP3 and CAD/MI using the Mendelian randomization (MR) method. We extracted summary−level datasets for TIMP3 and CAD/MI from the genome−wide association studies performed in the KORA study and CARDIoGRAMplusC4D consortium, respectively. Seven independent SNPs were obtained as instrumental variables for TIMP3. The MR analyses were replicated using FinnGen datasets, and the main results were combined in meta−analyses. Elevated genetically predicted serum TIMP3 levels were causally associated with a lower risk of CAD [odds ratio (OR), 0.97; 95% confidence interval (CI), 0.95, 0.98; p = 5.29 × 10⁻⁵] and MI (OR, 0.96; 95% CI, 0.95, 0.98; p = 3.85 × 10⁻⁵). The association patterns persisted in the meta−analyses combining the different datasets (CAD: OR, 0.97; 95% CI, 0.96, 0.99; p = 4.37 × 10⁻⁵; MI: OR, 0.97; 95% CI, 0.96, 0.99; p = 9.96 × 10⁻⁵) and was broadly consistent across a set of complementary analyses. Evidence of heterogeneity and horizontal pleiotropy was limited for all associations considered. In conclusion, this MR study supports inverse causal associations between serum TIMP3 and the risk of CAD and MI. Strategies for raising TIMP3 levels may offer new avenues for the prevention strategies of atherosclerotic cardiovascular diseases.

Submillimeter-scale multimaterial terrestrial robots

Robots with submillimeter dimensions are of interest for applications that range from tools for minimally invasive surgical procedures in clinical medicine to vehicles for manipulating cells/tissues in biology research. The limited classes of structures and materials that can be used in such robots, however, create challenges in achieving desired performance parameters and modes of operation. Here, we introduce approaches in manufacturing and actuation that address these constraints to enable untethered, terrestrial robots with complex, three-dimensional (3D) geometries and heterogeneous material construction. The manufacturing procedure exploits controlled mechanical buckling to create 3D multimaterial structures in layouts that range from arrays of filaments and origami constructs to biomimetic configurations and others. A balance of forces associated with a one-way shape memory alloy and the elastic resilience of an encapsulating shell provides the basis for reversible deformations of these structures. Modes of locomotion and manipulation span from bending, twisting, and expansion upon global heating to linear/curvilinear crawling, walking, turning, and jumping upon laser-induced local thermal actuation. Photonic structures such as retroreflectors and colorimetric sensing materials support simple forms of wireless monitoring and localization. These collective advances in materials, manufacturing, actuation, and sensing add to a growing body of capabilities in this emerging field of technology.

B, O and N Codoped Biomass-Derived Hierarchical Porous Carbon for High-Performance Electrochemical Energy Storage

High specific surface area, reasonable pore structure and heteroatom doping are beneficial to enhance charge storage, which all depend on the selection of precursors, activators and reasonable preparation methods. Here, B, O and N codoped biomass-derived hierarchical porous carbon was synthesized by using KCl/ZnCl2 as a combined activator and porogen and H3BO3 as both boron source and porogen. Moreover, the cheap, environmentally friendly and heteroatom-rich laver was used as a precursor, and impregnation and freeze-drying methods were used to make the biological cells of laver have sufficient contact with the activator so that the layer was deeply activated. The as-prepared carbon materials exhibit high surface area (1514.3 m2 g−1), three-dimensional (3D) interconnected hierarchical porous structure and abundant heteroatom doping. The synergistic effects of these properties promote the obtained carbon materials with excellent specific capacitance (382.5 F g−1 at 1 A g−1). The symmetric supercapacitor exhibits a maximum energy density of 29.2 W h kg−1 at a power density of 250 W kg−1 in 1 M Na2SO4, and the maximum energy density can reach to 51.3 W h kg−1 at a power density of 250 W kg−1 in 1 M BMIMBF4/AN. Moreover, the as-prepared carbon materials as anode for lithium-ion batteries possess high reversible capacity of 1497 mA h g−1 at 1 A g−1 and outstanding cycling stability (no decay after 2000 cycles).