Investigating sagittal spinal alignment, low back pain, and clinical outcomes after total hip arthroplasty for lumbar hyperlordosis: a retrospective study

INTRODUCTION

Hip-spine syndrome, wherein flexion deformity of the hip might exaggerate normal lumbar lordosis (LL), was first described in 1983. It could result in subluxation of the posterior facets and cause low back pain (LBP). However, the clinical outcomes of total hip arthroplasty (THA) and spinal alignment changes in patients with lumbar hyperlordosis (hyper LL) remain unknown. We aimed to clarify the proportion of patients with hyper LL before THA and compare pre- and post-operative sagittal spinal alignment, LBP, and clinical outcomes between patients with hyper LL and those with normal LL.

MATERIALS AND METHODS

We investigated 278 patients who underwent primary THA between December 2015 and December 2019. Spine radiographs in the standing position were examined preoperatively and 1 year postoperatively. Patients with hyper LL were defined as having a pelvic incidence (PI) minus LL of < - 9° preoperatively. The control group included age- and sex-matched patients with normal LL, defined by a PI minus LL of - 9° to 9°. Clinical outcomes were evaluated using the visual analogue scale (VAS) for LBP, Harris hip score (HHS), Oxford hip score (OHS), and University of California, Los Angeles (UCLA) activity score.

RESULTS

Thirty-eight patients (13.7%) had hyper LL, and they exhibited a lower pelvic tilt, lower sagittal vertical axis, and greater sigmoid curvature than did the controls. Evaluation of changes in the spinal alignment after surgery showed that the pelvis tilted more posteriorly, and LL decreased more in the hyper LL group than in the control group. Pre- and post-operative VAS for LBP, HHS, OHS, and UCLA activity scores were not significantly different between the two groups.

CONCLUSION

Hyper LL in patients with hip osteoarthritis had no adverse effects on LBP and the clinical outcomes of THA. Hyper LL may partially result from a flexible and adaptable lumbo-pelvic structure.

Biophysical analysis of Gaussia Luciferase bioluminescence mechanisms using a non-oxidizable coelenterazine

Gaussia luciferase (GLuc 18.2kDa; 168 residues) is a marine copepod luciferase that emits a bright blue light when oxidizing coelenterazine (CTZ). It is a helical protein where two homologous sequential repeats form two anti-parallel bundles, each made of four helices. We previously identified a hydrophobic cavity as a prime candidate for the catalytic site, but GLuc's fast bioluminescence reaction hampered a detailed analysis. Here, we used azacoelenterazine (Aza-CTZ), a non-oxidizable coelenterazine (CTZ) analog, as a probe to investigate its binding mode to GLuc. While analysing GLuc's activity, we unexpectedly found that salt and monovalent anions are absolutely required for Gluc's bioluminescence, which retrospectively appears reasonable for a sea-dwelling organism. The NMR-based investigation, using chemical shift perturbations monitored by ¹⁵N-¹H HSQC, suggested that Aza-CTZ (and thus unoxidized CTZ) binds to residues in or near the hydrophobic cavity. These NMR data are in line with a recent structural prediction of GLuc, hypothesizing that large structural changes occur in regions remote from the hydrophobic cavity upon the addition of CTZ. Interestingly, these results point toward a unique mode of catalysis to achieve CTZ oxidative decarboxylation.

Reflecting on mutational and biophysical analysis of Gaussia princeps Luciferase from a structural perspective: a unique bioluminescent enzyme

Gaussia princeps luciferase (GLuc 18.2 kDa; 168 residues) is a marine copepod luciferase that emits a bright blue light when oxidizing coelenterazine (CTZ). GLuc is a small luciferase, attracting much attention as a potential reporter protein. However, compared to firefly and Renilla luciferases, which have been thoroughly characterized and are used in a wide range of applications, structural and biophysical studies of GLuc have been slow to appear. Here, we review the biophysical and mutational studies of GLuc's bioluminescence from a structural viewpoint, particularly in view of its recent NMR solution structure, where two homologous sequential repeats form two anti-parallel bundles, each made of four helices, grabbing a short N-terminal helix. Additionally, a long loop classified as an intrinsically disordered region separates the two bundles forming one side of a hydrophobic pocket that is most likely the binding/catalytic site. We compare the NMR-determined structure with a recent AlphaFold2 prediction. Overall, the AlphaFold2 structure was in line with the solution structure; however, it surprisingly revealed a possible, alternative conformation, where the N-terminal helix is replaced by a newly formed α helix in the C-terminal tail that is unfolded in the NMR structure. In addition, we discuss the results of previous mutational analysis focusing on a putative catalytic core identified by chemical shift perturbation analysis and molecular dynamics simulations performed using both the NMR and the AlphaFold2 structures. In particular, we discuss the role of the possible conformational change and the hydrophobic pocket in GLuc's activity. Overall, the discussion points toward GLuc's unexpected and unusual characteristics that appear to be much more flexible than traditional enzymes, resulting in a unique mode of catalysis to achieve CTZ oxidative decarboxylation.

Supplementary Information

The online version contains supplementary material available at 10.1007/s12551-022-01025-6.

Biophysical studies of amorphous protein aggregation and in vivo immunogenicity

Amorphous protein aggregates are oligomers that lack specific, high-order structures. Soluble amorphous aggregates are smaller than ~1 µm. Despite their lack of high-order structure, amorphous protein aggregates exhibit specific biophysical properties such as reversibility of formation, density, conformation, and biochemical stability. Our mutational analysis using a Solubility Controlling Peptide (SCP) tag strongly suggests that amorphous aggregation of small globular proteins can significantly increase in vivo immune response and that the magnitude of enhanced immune responses depends on the aggregates' biophysical and biochemical properties. We propose that SCP tags might help develop subunit (protein) adjuvant-free (immunostimulant-free) vaccines by controlling the aggregation propensity of target proteins.

Bisphosphonate use is associated with a decreased joint narrowing rate in the non-arthritic hip

Aims

The preventive effects of bisphosphonates on articular cartilage in non-arthritic joints are unclear. This study aimed to investigate the effects of oral bisphosphonates on the rate of joint space narrowing in the non-arthritic hip.

Methods

We retrospectively reviewed standing whole-leg radiographs from patients who underwent knee arthroplasties from 2012 to 2020 at our institute. Patients with previous hip surgery, Kellgren–Lawrence grade ≥ II hip osteoarthritis, hip dysplasia, or rheumatoid arthritis were excluded. The rate of hip joint space narrowing was measured in 398 patients (796 hips), and the effects of the use of bisphosphonates were examined using the multivariate regression model and the propensity score matching (1:2) model.

Results

A total of 45 of 398 (11.3%) eligible patients were taking an oral bisphosphonate at the time of knee surgery, with a mean age of 75.8 years (SD 6.2) in bisphosphonate users and 75.7 years (SD 6.8) in non-users. The mean joint space narrowing rate was 0.04 mm/year (SD 0.11) in bisphosphonate users and 0.12 mm/year (SD 0.25) in non-users (p < 0.001). In the multivariate model, age (standardized coefficient = 0.0867, p = 0.016) and the use of a bisphosphonate (standardized coefficient = −0.182, p < 0.001) were associated with the joint space narrowing rate. After successfully matching 43 bisphosphonate users and 86 non-users, the joint narrowing rate was smaller in bisphosphonate users (p < 0.001).

Conclusion

The use of bisphosphonates is associated with decreased joint degeneration in non-arthritic hips after knee arthroplasty. Bisphosphonates slow joint degeneration, thus maintaining the thickness of joint cartilage in the normal joint or during the early phase of osteoarthritis. Cite this article: Bone Joint Res 2022;11(11):826–834.

Direct Analysis of Mitochondrial Damage Caused by Misfolded/Destabilized Proteins

Protein quality control is essential for cellular homeostasis. In this study, we examined the effect of improperly folded proteins that do not form amyloid fibrils on mitochondria, which play important roles in ATP production and cell death. First, we prepared domain 3 of the dengue envelope protein in wild type and four mutants with widely different biophysical properties in misfolded/aggregated or destabilized states. The effects of the different proteins were detected using fluorescence microscopy and Western blotting, which revealed that three of the five proteins disrupted both inner and outer membrane integrity, while the other two proteins, including the wild type, did not. Next, we examined the common characteristics of the proteins that displayed toxicity against mitochondria by measuring oligomer size, molten globule-like properties, and thermal stability. The common feature of all three toxic proteins was thermal instability. Therefore, our data strongly suggest that thermally unstable proteins generated in the cytosol can cause cellular damage by coming into direct contact with mitochondria. More importantly, we revealed that this damage is not amyloid-specific.

The Impact of Spinopelvic Parameters on Hip Degeneration After Spinal Fusion

STUDY DESIGN

Retrospective cohort study.

OBJECTIVE

This study aimed to investigate the effects of spinopelvic alignment parameters after spinal fusion on the rate of joint space narrowing in nonarthritic hips.

SUMMARY OF BACKGROUND DATA

Spinal fusion affects the forces on the adjacent hip joint. Therefore, hip joint narrowing may be increased after spinal fusion surgery. However, the relationship between spinal alignment and hip degeneration remains unclarified.

METHODS

We retrospectively reviewed data from patients who underwent lumbar spinal fusion from 2011 to 2018 at our institute. Patients with hip osteoarthritis (Kellgren-Lawrence grade ≥II) or hip dysplasia were excluded. The rate of hip joint space narrowing after spinal fusion was measured in 191 patients (382 hips). We assessed the effects of the following spinopelvic alignment parameters on the joint narrowing rate: pelvic tilt, sacral slope (SS), pelvic incidence (PI), lumbar lordosis (LL), PI-LL, sagittal vertical axis, and distance between the C7 plumb line, and the central sacral vertical line (C7-CSVL).

RESULTS

The hip joint narrowing rate was greater when four or more levels were fused compared with single-level fusion. After adjusting for the effects of patient-related factors, the alignment parameters significantly associated with the hip joint narrowing rate were the PI ( P = 0.0002), SS ( P = 0.047), and PI-LL ( P = 0.0022). A subgroup analysis of patients who underwent long fusion (four or more levels combined with iliac screws) also indicated that the PI ( P = 0.013), SS ( P = 0.0054), and PI-LL ( P = 0.046) were associated with the hip joint narrowing rate.

CONCLUSION

The PI, SS, and PI-LL were associated with the progression of hip joint narrowing after spinal fusion, especially after fusion of four or more levels. Surgeons need to be aware of the risk of increased hip joint narrowing in patients with a large PI, SS, and PI-LL after fusion surgery.

Estimation of Minimum Biofilm Eradication Concentration (MBEC) on In Vivo Biofilm on Orthopedic Implants in a Rodent Femoral Infection Model

The formation of a biofilm on the implant surface is a major cause of intractable implant-associated infection. To investigate the antibiotic concentration needed to eradicate the bacteria inside a biofilm, the minimum biofilm eradication concentration (MBEC) has been used, mostly against in vitro biofilms on plastic surfaces. To produce a more clinically relevant environment, an MBEC assay against biofilms on stainless-steel implants formed in a rat femoral infection model was developed. The rats were implanted with stainless steel screws contaminated by two Staphylococcus aureus strains (UAMS-1, methicillin-sensitive Staphylococcus aureus; USA300LAC, methicillin-resistant Staphylococcus aureus) and euthanized on days 3 and 14. Implants were harvested, washed, and incubated with various concentrations (64–4096 μg/mL) of gentamicin (GM), vancomycin (VA), or cefazolin (CZ) with or without an accompanying systemic treatment dose of VA (20 μg/mL) or rifampicin (RF) (1.5 μg/mL) for 24 h. The implant was vortexed and sonicated, the biofilm was removed, and the implant was re-incubated to determine bacterial recovery. MBEC on the removed biofilm and implant was defined as in vivo MBEC and in vivo implant MBEC, respectively, and the concentrations of 100% and 60% eradication were defined as MBEC₁₀₀ and MBEC₆₀, respectively. As for in vivo MBEC, MBEC₁₀₀ of GM was 256–1024 μg/mL, but that of VA and CZ ranged from 2048–4096 μg/mL. Surprisingly, the in vivo implant MBEC was much higher, ranging from 2048 μg/mL to more than 4096 μg/mL. The addition of RF, not VA, as a secondary antibiotic was effective, and MBEC₆₀ on day 3 USA300LAC biofilm was reduced from 1024 μg/mL with GM alone to 128 μg/mL in combination with RF and the MBEC₆₀ on day 14 USA300LAC biofilm was reduced from 2048 μg/mL in GM alone to 256 μg/mL in combination with RF. In conclusion, a novel MBEC assay for in vivo biofilms on orthopedic implants was developed. GM was the most effective against both methicillin-sensitive and methicillin-resistant Staphylococcus aureus, in in vivo biofilms, and the addition of a systemic concentration of RF reduced MBEC of GM. Early initiation of treatment is desired because the required concentration of antibiotics increases with biofilm maturation.

Development of a clinical prediction rule to identify physical activity after total hip arthroplasty

OBJECTIVE

To develop clinical prediction rule (CPR) of physical activity at 1-year after total hip arthroplasty (THA).

DESIGN

Retrospective cohort study.

SETTING

University hospital with orthopedic surgery.

PARTICIPANTS

The study group included 321 patients (56 men) who underwent primary THA.

INTERVENTION

Not applicable.

MAIN OUTCOMES MEASURES

The data collected included age, body mass index, clinical score from the questionnaires, hip pain, range of motion, muscle strength, and Physical functions (10-Meter Walk Test, Timed Up and Go test and Sit-to-stand). Patients were classified into sufficient and insufficient activity groups based on their University of California, Los Angeles (UCLA) activity score 1 year after THA. Variables measured preoperatively and at 3 weeks postoperatively were analyzed using univariate and multivariate methods to derive CPR for physical activity.

RESULTS

A CPR was developed using the following five factors and cut-offs: age, ≤70.5 years; preoperative UCLA activity score, ≥3.5; preoperative hip abduction strength, ≥0.54 Nm/kg; preoperative knee extension strength, ≥1.04 Nm/kg; and 10-Meter Walk Test, ≤8.49 s at 3 weeks after surgery. The presence of four of the five factors predicted a sufficient physical activity level at 1-year, with a positive likelihood ratio of 5.94 and probability of 85.4%. The presence of five predictor variables increased the probability of sufficient physical activity after THA to 94.7%.

CONCLUSION

This study developed a CPR for physical activity at 1-year after THA. Having four or more of the five measurements were useful indicators for predicting of physical activity at 1 year postoperatively.

Corticosteroid-associated osteonecrosis of the femoral head after orthotopic liver transplantation and the outcomes of subsequent total hip arthroplasty

BACKGROUND

Corticosteroids are essential for immunosuppression after orthotopic liver transplantation (OLT), but also have many side effects. Osteonecrosis of the femoral head (ONFH) is one of the most serious complications requiring prostheses. However, few studies have investigated ONFH after OLT. The purpose of this study is to survey the incidence of corticosteroid-induced ONFH after OLT and the outcomes of total hip arthroplasty (THA).

METHODS

Between January 2001 and December 2010, a series of 926 patients underwent OLT at our Hospital. A retrospective analysis was performed on a total of 738 patients who survived at least 2 years after OLT. The incidence of symptomatic ONFH, the interval from OLT to the initial diagnosis of ONFH, and the cumulative dose of corticosteroids were analyzed. The side effects related to OLT, such as other osteonecrosis lesions, osteoporotic fractures, and infection, were monitored. For patients who underwent THA, radiological findings and Japanese Orthopaedic Association (JOA) scores were evaluated.

RESULTS

ONFH occurred in 10 patients (13 hips) (6 men [7 hips], 4 women [6 hips]), with an incidence of 1.36%. The average age at OLT was 51.4 years (range, 31-61 years). The average interval from OLT to ONFH was 86.7 months (range, 22-155 months). The average cumulative dose of corticosteroids was 7274 mg (range, 1342-29,514 mg). Twenty patients suffered from side effects related to OLT. Seven patients (8 hips) underwent THA. No adverse events including infection arose during the perioperative process. One hip dislocated, and one femoral stem displayed a radiolucent line. The average JOA score improved from 45.4 (range, 25-76) preoperatively to 86.9 (range, 73-99) at final follow-up. No patients required revision surgery.

CONCLUSIONS

The incidence of symptomatic ONFH after OLT was 1.36%. Once the graft function becomes stable, THA can be a safe and effective treatment option for patients with ONFH after OLT.

Radiodensity measurement is feasible for evaluating fatty infiltration in hip abductors

OBJECTIVE

This retrospective study aimed to compare radiodensity measurements and Goutallier grading systems for the evaluation of fatty infiltration in hip abductors.

METHODS

The radiodensity of the gluteus minimus and medius muscles was measured in 80 hips of 40 patients. These muscles were graded for fatty infiltration using three five-grade classification systems: the original Goutallier classification on both computed tomography (CT) and magnetic resonance imaging (MRI), and a new objective classification based on the percentage of the functional muscle area (defined as 30-100 Hounsfield units). After measuring and grading the abductors, correlation coefficients between them were analyzed.

RESULTS

Spearman's rank correlation coefficients (ρ) between radiodensity measurements of abductors and the Goutallier classification on CT and MRI were -0.701 and -0.552 for the gluteus minimus and -0.832 and -0.740 for the gluteus medius, respectively. Our new classification had correlation coefficients of -0.844 and -0.926 for the gluteus minimus and gluteus medius, respectively.

CONCLUSIONS

Radiodensity measurements showed a strong correlation with the grading systems, particularly with the new classification based on the percentage of the functional muscle area. Considering the subjective nature of the original Goutallier grading systems, we conclude that radiodensity assessment is feasible and more objective for evaluating fatty infiltration in hip abductors.

The superior accuracy of a novel method in total hip wear calculations following radiographic measurement

Background

Polyethylene wear is one of the major concerns of orthopedic surgeons. However, there is no standardized calculation method for the wear rate following radiographic measurement. The purpose of this study was to propose a novel method of wear calculation and to compare its accuracy with a representative conventional method.

Methods

Relative position of the center of the femoral head to that of the cup progresses in one direction following arthroplasty surgery because of bedding-in and wear. We predetermined the amount of bedding-in, wear rate, and random error in measuring the head center position in a 2-dimensional plane. We calculated the wear rate using the head center coordinates over a certain number of measurement periods using a representative conventional method and our novel method. The conventional method consisted of transforming vector data into scalars and conducting a least-squares method. The least-squares method was directly applied to each component of the vector in the novel method. We evaluated the accuracy of these methods by comparing the expected value for the wear rate with their predetermined true values.

Results

If the error were limited to being random, the novel method could provide the predetermined wear rate as the calculation result. However, the conventional method could not.

Conclusion

We recommend using the novel method for the wear calculation rather than the conventional method because of its mathematical accuracy.

Supplementary Information

The online version contains supplementary material available at 10.1186/s12891-021-04964-5.

Wear resistance of first-generation highly cross-linked annealed polyethylene in cementless total hip arthroplasty is maintained 20 years after surgery

AIMS

The aim of this study was to evaluate the performance of first-generation annealed highly cross-linked polyethylene (HXLPE) in cementless total hip arthroplasty (THA).

METHODS

We retrospectively evaluated 29 patients (35 hips) who underwent THA between December 2000 and February 2002. The survival rate was estimated using the Kaplan-Meier method. Hip joint function was evaluated using the Japanese Orthopaedic Association (JOA) score. Two-dimensional polyethylene wear was estimated using Martell's Hip Analysis Suite. We calculated the wear rates between years 1 and 5, 5 and 10, 10 and 15, and 15 and final follow-up.

RESULTS

The mean follow-up period was 19.1 years (SD 0.6; 17.3 to 20.1). The 19-year overall survival rate with the end point of all-cause revision was 97.0% (95% confidence interval (CI) 91 to 100). The mean JOA score improved from 43.2 (SD 10.6; 30 to 76) before surgery to 90.2 (SD 6.4; 76 to 98) at the final follow-up (p < 0.001). There was no osteolysis or loosening of the acetabular or femoral components. The overall steady-state wear rate was 0.013 mm/year (SD 0.012). There was no hip with a steady-state wear rate of > 0.1 mm/year. There was no significant difference in wear rates for each period. We found no significant correlation between the wear rate and age, body weight, BMI, or cup inclination.

CONCLUSION

First-generation annealed HXLPE shows excellent wear resistance and no acceleration of wear for approximately 20 years, with low all-cause revision rates. Cite this article: Bone Joint J 2022;104-B(2):200-205.

Discrepancy in the Responsiveness to Hip Range of Motion Between Harris and Oxford Hip Scores

Background

The primary objectives of total hip arthroplasty (THA) include mobility improvement and pain relief; however, the correlation between hip range of motion (ROM) and function remains unclear. We aimed to explore how ROM affects hip functions after THA and compare the responsiveness of each component of the modified Harris Hip Score (mHHS) and Oxford Hip Score (OHS) to preoperative and postoperative ROM.

Methods

This prospective observational study involved 120 patients who underwent unilateral THA. Univariate regression analyses were performed using the University of California Los Angeles activity score and mHHS and OHS to determine the effects of preoperative and postoperative flex ROM on clinical scores at 12 months. Multivariate regressions were performed to adjust for the confounding effects of patient factors: age, sex, body mass index, and diagnosis.

Results

A larger preoperative flexion ROM was associated with a higher score in the mHHS socks component (standardized coefficient [SC] = 0.26, P = .0041) at 12 months; the effect on the OHS socks component was not significant (P = .34). A larger flexion ROM at 12 months was associated with higher scores in the mHHS support (SC = 0.21, P = .026), stairs (SC = 0.35, P = .0002), and socks (SC = 0.32, P = .0007) components but had no significant effect on any OHS component. The effects of ROM on University of California Los Angeles activity score were limited.

Conclusions

A discrepancy was noted in the responsiveness to ROM between the two major measurement tools; this difference might be because mHHS and OHS are surgeon- and patient-administered questionnaires, respectively. This discrepancy also suggests that the patients have higher satisfaction than that assumed by the surgeons.

Preoperative Factors Associated With Low Back Pain Improvement After Total Hip Arthroplasty in a Japanese Population

BACKGROUND

Spinal disorders and low back pain (LBP) have been associated with worse clinical outcomes of total hip arthroplasty (THA). It is essential to identify spinal factors associated with post-THA LBP improvement. Therefore, we aimed to determine the proportion of patients with improved LBP after THA and to identify the preoperative spinal factors associated with LBP improvement.

METHODS

We included 151 patients who underwent primary THA between December 2015 and December 2019 and had a preoperative visual analog scale score for LBP of ≥2. The patients were classified into the LBP improved or LBP continued group based on a visual analog scale score for LBP at 1 year after THA. Preoperative spinal parameters were compared between the 2 groups.

RESULTS

Ninety-five patients (62.9%) were classified into the LBP improved group. Among the coronal spinal parameters, the Cobb angle was significantly lower in the LBP improved group. Among the sagittal spinal parameters, the LBP continued group showed a significantly more posteriorly titled pelvis, lower lumbar lordosis, greater sagittal vertical axis, and greater pelvic incidence minus lumbar lordosis mismatch, indicating a sagittal spinal imbalance. Logistic regression analysis found that preoperative factors associated with LBP improvement after THA had a low Cobb angle and high anterior pelvic plane angle (anteriorly tilted pelvis).

CONCLUSION

Among patients with LBP before THA, 62.9% had improved LBP. Sagittal spinal imbalance and high Cobb angle were the key spinal factors associated with persistent LBP. Our findings suggest that hip surgeons should evaluate spinal alignment before THA in patients with LBP.

Blocking PSD95-PDZ3's amyloidogenesis through point mutations that inhibit high-temperature reversible oligomerization (RO)

The third PDZ domain of postsynaptic density protein 95 (PSD95-PDZ3; 11 kDa, 103 residues) has a propensity to form amyloid fibrils at high temperatures. At neutral pH, wild type PDZ3 is natively folded, but it exhibits a peculiar three-state thermal unfolding with a reversible oligomerization (RO) equilibrium at high temperatures, which is uncharacteristic in the unfolding of small globular protein as PDZ3 is. Here, we examined RO's role in PDZ3's amyloidogenesis at high-temperature using two variants (F340A and L342A) that suppress the high-temperature RO and five single-alanine-mutated variants, where we mutated surface-exposed hydrophobic residues to alanine. Circular Dichroism (CD), Analytical Ultracentrifuge (AUC), and other spectroscopic measurements confirmed the retention of the native structure at ambient temperature. Differential Scanning Calorimetry (DSC) was used to assess the presence or absence of the high-temperature RO, and the amyloidogenicity of the variants was measured by Thioflavin T (ThT) fluorescence and Transmission Electron Microscopy (TEM). By comparing the fraction of RO and the ThT signal, we found that mutations that suppressed the high-temperature RO strongly inhibited amyloidogenesis. On the other hand, all variants forming RO also formed amyloids under the same conditions as the wild type PDZ3.

Early Breakage of All Proximal Locking Compression Screws under Non-weight-bearing Conditions after Derotational Femoral Osteotomy in a Child with Cerebral Palsy: A Case Report

INTRODUCTION

The locking compression plate (LCP) system for pediatric hips has improved fixation and angular stability. Herein, we report a rare case in which all proximal locking compression screws were broken before weight bearing in the early post-operative period after derotational femoral osteotomy in a child with spastic cerebral palsy (CP).

CASE REPORT

Derotational femoral osteotomy was performed using a LCP system for a 9-year-old boy with spastic CP to correct excessive femoral anteversion, causing unstable toe-in gait. Proximal screw breakage was found 2 weeks postoperatively during hip-spica casting under non-weight-bearing conditions. Implant breakage was considered a result of the excessive spasticity of the lower limb. At the time of reoperation, shortening and varus correction of the femur and muscle tendon release were performed in addition to the refixation of the osteotomy. Intensive pain control was ensured, and anti-spastic medication and botulinum toxin injection were administered. Complete bone healing was successfully achieved 6 months after the second surgery.

CONCLUSION

Surgeons need to consider the spasticity of the lower limb as a cause of implant failure. Management to reduce spasticity and mechanical load to the implant is important for preventing implant failures in patients with spastic CP.

Functional characteristics associated with hip abductor torque in severe hip osteoarthritis

BACKGROUND

Hip abductor weakness due to the progression of hip osteoarthritis (OA) commonly causes poor functional mobility. The hip abductor strength has also been identified as a clinically relevant factor for successful functional outcomes after total hip arthroplasty.

OBJECTIVES

This study aimed to examine the functional characteristics related to hip abductor torque in patients with hip OA.

DESIGN

A cross-sectional survey study.

METHODS

One hundred and eight female patients with severe unilateral hip OA participated in this study. Hip abductor torque and pain were measured. The muscle cross-sectional area (CSA) and skeletal muscle density (SMD) of the gluteal muscles were also measured using computed tomography. To identify the hip parameters associated with hip abductor torque, multiple regression analysis was performed. The healthy model included the CSA and SMD of gluteus maximus, gluteus medius, and gluteus minimus; range of motion in hip abduction; age; and body mass index. The affected model included hip pain in addition to the healthy model.

RESULTS

In the affected limb, multiple regression analysis identified pain and angle of hip abduction as factors that determine hip abductor torque (Adjusted R² = 0.39). In contrast, our analysis identified CSA and SMD of the gluteus medius and SMD of the gluteus minimus as the significant variables related to hip abductor torque in the healthy limb (Adjusted R² = 0.40).

CONCLUSION

The findings of this study indicated that it is necessary to consider that hip pain may inhibit muscle exertion and contraction while training to improve the hip abductor torque in the affected limb.

Radiolucent lines do not affect the longevity of highly cross-linked polyethylene cemented components in total hip arthroplasty

AIMS

We aimed to evaluate the long-term outcome of highly cross-linked polyethylene (HXLPE) cemented acetabular components and assess whether any radiolucent lines (RLLs) which arose were progressive.

METHODS

We retrospectively reviewed 170 patients who underwent 187 total hip arthroplasties at two hospitals with a minimum follow-up of ten years. All interventions were performed using the same combination of HXLPE cemented acetabular components with femoral stems made of titanium alloy. Kaplan-Meier survival analysis was performed for the primary endpoint of acetabular component revision surgery for any reason and secondary endpoint of the appearance of RLLs. RLLs that had appeared once were observed over time. We statistically assessed potential relationships between RLLs and a number of factors, including the technique of femoral head autografting and the Japanese Orthopaedic Association score.

RESULTS

The mean follow-up period was 13.0 years (10.0 to 16.3). Femoral head autografting was performed on 135 hips (72.2%). One acetabular component was retrieved because of deep infection. No revision was performed for the aseptic acetabular loosening. The Kaplan-Meier survival curve for the primary and secondary endpoints were 98.2% (95% confidence interval (CI) 88.6% to 99.8%) and 79.3% (95% CI 72.8% to 84.6%), respectively. RLLs were detected in 38 hips (21.2%), at a mean of 1.7 years (1 month to 6 years) postoperatively. None of the RLLs were progressive, and the presence of RLLs did not show a significant association with the survival and clinical score. RLLs were more frequently observed in hips without femoral head autografts than in those with autografts.

CONCLUSION

The use of HXLPE cemented acetabular components in total hip arthroplasty demonstrated excellent clinical outcomes after ten years, and no RLLs were progressive, and their presence did not affect the outcome. Femoral head autografting did not negatively impact the acetabular component survival or the appearance of RLLs. Cite this article: Bone Joint J 2021;103-B(10):1604-1610.

Assessment of prediction methods for protein structures determined by NMR in CASP14: Impact of AlphaFold2

NMR studies can provide unique information about protein conformations in solution. In CASP14, three reference structures provided by solution NMR methods were available (T1027, T1029, and T1055), as well as a fourth data set of NMR‐derived contacts for an integral membrane protein (T1088). For the three targets with NMR‐based structures, the best prediction results ranged from very good (GDT_TS = 0.90, for T1055) to poor (GDT_TS = 0.47, for T1029). We explored the basis of these results by comparing all CASP14 prediction models against experimental NMR data. For T1027, NMR data reveal extensive internal dynamics, presenting a unique challenge for protein structure prediction methods. The analysis of T1029 motivated exploration of a novel method of “inverse structure determination,” in which an AlphaFold2 model was used to guide NMR data analysis. NMR data provided to CASP predictor groups for target T1088, a 238‐residue integral membrane porin, was also used to assess several NMR‐assisted prediction methods. Most groups involved in this exercise generated similar beta‐barrel models, with good agreement with the experimental data. However, as was also observed in CASP13, some pure prediction groups that did not use any NMR data generated models for T1088 that better fit the NMR data than the models generated using these experimental data. These results demonstrate the remarkable power of modern methods to predict structures of proteins with accuracies rivaling solution NMR structures, and that it is now possible to reliably use prediction models to guide and complement experimental NMR data analysis.