Enhancing polyethylene degradation: a novel bioprocess approach using Acinetobacter nosocomialis pseudo-resting cells

Despite the discovery of several bacteria capable of interacting with polymers, the activity of the natural bacterial isolates is limited. Furthermore, there is a lack of knowledge regarding the development of bioprocesses for polyethylene (PE) degradation. Here, we report a bioprocess using pseudo-resting cells for efficient degradation of PE. The bacterial strain Acinetobacter nosocomialis was isolated from PE-containing landfills and characterized using low-density PE (LDPE) surface oxidation when incubated with LDPE. We optimized culture conditions to generate catalytic pseudo-resting cells of A. nosocomialis that are capable of degrading LDPE films in a bioreactor. After 28 days of bioreactor operation using pseudo-resting cells of A. nosocomialis, we observed the formation of holes on the PE film (39 holes per 217 cm2, a maximum diameter of 1440 μm). This study highlights the potential of bacteria as biocatalysts for the development of PE degradation processes. KEY POINTS: • New bioprocess has been proposed to degrade polyethylene (PE). • Process with pseudo-resting cells results in the formation of holes in PE film. • We demonstrated PE degradation using A. nosocomialis as a biocatalyst.

A green approach for the automatic quantitative analysis of additives in plastic samples using in-tube extraction dynamic headspace sampling technique coupled to GC-MS/MS

BACKGROUND

Many of the chemicals frequently used as additives have been recognised as hazardous substances, and therefore their analysis is necessary to evaluate plastic contamination risk. Additives analysis in plastic samples is usually performed by methods involving high volumes of toxic solvents or having high detection limits. In this work, a novel, fast, solventless and reliable green method was developed for the automated analysis of plastic additives from plastic samples. The proposed method consists of in-tube extraction dynamic headspace sampling (ITEX-DHS) combined with gas chromatography (GC) and mass spectrometry (MS/MS) determination.

RESULTS

Several parameters affecting the ITEX-DHS extraction of 47 additives in plastic samples (including phthalates, bisphenols, adipates, citrates, benzophenones, organophosphorus compounds, among others) were optimised. The use of matrix-matched calibration, together with labelled surrogate standards, minimises matrix effects, resulting in recoveries between 70 and 128%, with good quantitation limits (below 0.1 μg g-1 for most compounds) and precision (<20%). The method proposed can be applied to any type of polymer, but due to the existence of the matrix effect, calibrates with the adequate matrix should be performed for each polymer.

SIGNIFICANCE

This method represents an effective improvement compared to previous methods because it is fast, solvent-free, fully automated, and provides reliable quantification of additives in plastic samples.

Stability and dispersibility of microplastics in experimental exposure medium and their dimensional characterization by SMLS, SAXS, Raman microscopy, and SEM

The plastic production that contributes to the global plastic reservoir presents a major challenge for society in managing plastic waste and mitigating the environmental damage of microplastic (MP) pollution. In the environment, the formation of biomolecular corona around MPs enhance the stability of MP suspensions, influencing the bioavailability and toxicity of MPs. Essential physical properties including MP stability, dispersibility, agglomeration, and dimensional size must be precisely defined and measured in complex media taking into account the formation of a protein corona. Using static multiple light scattering (SMLS), small angle X-ray scattering (SAXS), Raman microscopy, and scanning electron microscopy (SEM), we measured the particle size, density, stability, and agglomeration state of polyethylene and polypropylene MPs stabilized in aqueous suspension by BSA. SEM analysis revealed the formation of nanoplastic debris as MP suspensions aged. Our results suggest that protein adsorption favors the formation of secondary nanoplastics, potentially posing an additional threat to ecosystems. This approach provides analytical methodologies by integrating SEM, SMLS, and SAXS, for characterizing MP suspensions and highlights the effect of the protein corona on size measurements of micro/nanoplastics. Our analysis demonstrates the detectability of secondary nanoplastics by SEM, paving the way for monitoring and controlling human exposure.

Polyethylene, whose surface has been modified by UV irradiation, induces cytotoxicity: A comparison with microplastics found in beaches

Microplastics, plastic particles 5 mm or less in size, are abundant in the environment; hence, the exposure of humans to microplastics is a great concern. Usually, the surface of microplastics found in the environment has undergone degradation by external factors such as ultraviolet rays and water waves. One of the characteristics of changes caused by surface degradation of microplastics is the introduction of oxygen-containing functional groups. Surface degradation alters the physicochemical properties of plastics, suggesting that the biological effects of environmentally degraded plastics may differ from those of pure plastics. However, the biological effects of plastics introduced with oxygen-containing functional groups through degradation are poorly elucidated owing to the lack of a plastic sample that imitates the degradation state of plastics found in the environment. In this study, we investigated the degradation state of microplastics collected from a beach. Next, we degraded a commercially available polyethylene (PE) particles via vacuum ultraviolet (VUV) irradiation and showed that chemical surface state of PE imitates that of microplastics in the environment. We evaluated the cytotoxic effects of degraded PE samples on immune and epithelial cell lines. We found that VUV irradiation was effective in degrading PE within a short period, and concentration-dependent cytotoxicity was induced by degraded PE in all cell lines. Our results indicate that the cytotoxic effect of PE on different cell types depends on the degree of microplastic degradation, which contributes to our understanding of the effects of PE microplastics on humans.

Biodegradation of polyethylene (PE), polypropylene (PP), and polystyrene (PS) microplastics by floc-forming bacteria, Bacillus cereus strain SHBF2, isolated from a commercial aquafarm

The ubiquitous proximity of the commonly used microplastic (MP) particles particularly polyethylene (PE), polypropylene (PP), and polystyrene (PS) poses a serious threat to the environment and human health globally. Biological treatment as an environment-friendly approach to counter MP pollution has recent interest when the bio-agent has beneficial functions in their ecosystem. This study aimed to utilize beneficial floc-forming bacteria Bacillus cereus SHBF2 isolated from an aquaculture farm in reducing the MP particles (PE, PP, and PS) from their environment. The bacteria were inoculated for 60 days in a medium containing MP particle as a sole carbon source. On different days of incubation (DOI), the bacterial growth analysis was monitored and the MP particles were harvested to examine their weight loss, surface changes, and alterations in chemical properties. After 60 DOI, the highest weight loss was recorded for PE, 6.87 ± 0.92%, which was further evaluated to daily reduction rate (k), 0.00118 day-1, and half-life (t1/2), 605.08 ± 138.52 days. The OD value (1.74 ± 0.008 Abs.) indicated the higher efficiency of bacteria for PP utilization, and so for the colony formation per define volume (1.04 × 1011 CFU/mL). Biofilm formation, erosions, cracks, and fragments were evident during the observation of the tested MPs using the scanning electron microscope (SEM). The formation of carbonyl and alcohol group due to the oxidation and hydrolysis by SHBF2 strain were confirmed using the Fourier transform infrared spectroscopic (FTIR) analysis. Additionally, the alterations of pH and CO2 evolution from each of the MP type ensures the bacterial activity and mineralization of the MP particles. The findings of this study have confirmed and indicated a higher degree of biodegradation for all of the selected MP particles. B. cereus SHBF2, the floc-forming bacteria used in aquaculture, has demonstrated a great potential for use as an efficient MP-degrading bacterium in the biofloc farming system in the near future to guarantee a sustainable green aquaculture production.

Polyethylene and sulfa antibiotic remediation in soil using a multifunctional degrading bacterium

To obtain a multifunctional bacterium that can effectively degrade polyethylene (PE) and sulfonamide antibiotics (SAs), PE and SAs were selected as the primary research objects. Multifunctional degrading bacteria were isolated and screened from an environment in which plastics and antibiotics have existed for a long time. An efficient degrading strain, Raoultella sp., was screened by measuring the degradation performance of PE and SAs. We analyzed the changes in the microbial community of indigenous bacteria using 16S rRNA. After 60 d of degradation at 28 °C, the Raoultella strain to PE degradation rate was 4.20 %. The SA degradation rates were 96 % (sulfonathiazole, (ST)), 86 % (sulfamerazine, (SM)), 72 % (sulfamethazine, (SM2)) and 64 % (sulfamethoxazole, (SMX)), respectively. This bacterium increases the surface roughness of PE plastic films and produces numerous gullies, pits, and folds. In addition, after 60 d, the contact angle of the plastic film decreased from 92.965° to 70.205°, indicating a decrease in hydrophobicity. High-throughput sequencing analysis of the degrading bacteria revealed that the Raoultella strain encodes enzymes involved in PE and SA degradation. The results of this study not only provide a theoretical basis for further study of the degradation mechanism of multifunctional and efficient degrading bacteria but also provide potential strain resources for the biodegradation of waste plastics and antibiotics in the environment.

Coupling hyperspectral imaging with machine learning algorithms for detecting polyethylene (PE) and polyamide (PA) in soils

Soil, particularly in agricultural regions, has been recognized as one of the significant reservoirs for the emerging contaminant of MPs. Therefore, developing a rapid and efficient method is critical for their identification in soil. Here, we coupled HSI systems [i.e., VNIR (400-1000 nm), InGaAs (800-1600 nm), and MCT (1000-2500 nm)] with machine learning algorithms to distinguish soils spiked with white PE and PA (average size of 50 and 300 µm, respectively). The soil-normalized SWIR spectra unveiled significant spectral differences not only between control soil and pure MPs (i.e., PE 100% and PA 100%) but also among five soil-MPs mixtures (i.e., PE 1.6%, PE 6.9%, PA 5.0%, and PA 11.3%). This was primarily attributable to the 1st-3rd overtones and combination bands of C-H groups in MPs. Feature reductions visually demonstrated the separability of seven sample types by SWIR and the inseparability of five soil-MPs mixtures by VNIR. The detection models achieved higher accuracies using InGaAs (92-100%) and MCT (97-100%) compared to VNIR (44-87%), classifying 7 sample types. Our study indicated the feasibility of InGaAs and MCT HSI systems in detecting PE (as low as 1.6%) and PA (as low as 5.0%) in soil. SYNOPSIS: One of two SWIR HSI systems (i.e., InGaAs and MCT) with a sample imaging surface area of 3.6 mm² per grid cell was sufficient for detecting PE (as low as 1.6%) and PA (as low as 5.0%) in soils without the digestion and separation procedures.

Discrimination of plastic waste pyrolysis oil feedstocks using supercritical fluid chromatography

Advanced chemical recycling techniques provide new avenues for handling and recycling mixed plastic waste; pyrolysis is a prominent approach involving heating plastic waste in an oxygen-free environment to create pyrolysis oils. Pyrolysis oils must be thoroughly characterized before being refined into fuels and chemical feedstocks. Here, a method based on supercritical fluid chromatography with ultraviolet detection was developed to analyze plastic waste pyrolysis oils. Multiple stationary phases were examined, and 2-ethyl pyridine was chosen as the best stationary phase for resolving pyrolysis oil components. Different standards and different plastic waste pyrolysis oils were compared across the different stationary phases. Up to three columns were serially coupled to increase efficiency and column capacity. It was found that a general method using ethanol as a modifier and two 2-ethyl pyridine columns could effectively resolve plastic waste pyrolysis oils. The potential for differentiating polyethylene and polypropylene feedstocks was demonstrated using principal component analysis.

Co-, Ni-, and Cu-Doped Fe-Based Catalysts for the Microwave-Assisted Catalytic Pyrolysis of Polyethylene

Environmental issues caused by waste polyethylene are becoming increasingly severe. Among potential treatment processes, microwave-assisted catalytic pyrolysis is promising for converting waste plastics into valuable products owing to its energy efficiency and environmental sustainability. Herein, a modified citric acid combustion method was used to prepare a series of metal oxide catalysts with loose porous structures. The prepared Fe-based catalysts doped with Co, Ni, or Cu were employed in the microwave-assisted catalytic pyrolysis of polyethylene. The bimetallic Co1Fe1Ox catalyst exhibited the best performance, yielding hydrogen at a rate of 60.7 mmol/gplastic. Further variation in the Co : Fe ratio revealed that the Co1Fe9Ox catalyst achieved the highest hydrogen production efficiency (63.64 mmol/gplastic). Similar oil-phase products were obtained over the various catalysts, as revealed by infrared spectroscopy and proton nuclear magnetic resonance spectroscopy. Furthermore, scanning electron microscopy (SEM) identified carbon nanotubes as the major solid product of pyrolysis, which were attached to the catalyst surface. Finally, a combination of thermogravimetric analysis, SEM, and energy-dispersive X-ray spectroscopy indicated that the reduction in catalytic activity following recycling was caused by the accumulation of carbonaceous products on the catalyst surface. Overall, Co1Fe9Ox catalysts were favorable for obtaining H2 and carbon nanotubes by the microwave-assisted pyrolysis of polyethylene.

Microplastics, their abundance, and distribution in water and sediments in North Chennai, India: An assessment of pollution risk and human health impacts

Plastic particles, measuring <5 mm in size, mainly originate from larger plastic debris undergoing degradation, fragmenting into even smaller fragments. The goal was to analyze the spatial diversity and polymer composition of microplastics (MPs) in North Chennai, South India, aiming to evaluate their prevalence and features like composition, dimensions, color, and shape. In 60 sediment samples, a combined count of 1589 particles were detected, averaging 26 particles per 5 g-1 of dry sediment. The water samples from the North Chennai vicinity encompassed a sum of 1588 particles across 71 samples, with an average of 22 items/L. The majority of MPs ranged in size from 1 mm to 500 μm. The ATR-FTIR results identified the predominant types of MPs as polystyrene, polyvinyl chloride, polyethylene, polyethylene terephthalate, and polypropylene in sediment and water. The spatial variation analysis revealed high MPs concentration in landfill sites, areas with dense populations, and popular tourist destinations. The pollution load index in water demonstrated that MPs had contaminated all stations. Upon evaluating the polymeric and pollution risks, it was evident that they ranged from 5.13 to 430.15 and 2.83 to 15,963.2, which is relatively low to exceedingly high levels. As the quantity of MPs and hazardous polymers increased, the level of pollution and corresponding risks also escalated significantly. The existence of MPs in lake water, as opposed to open well water, could potentially pose a cancer risk for both children and adults who consume it. Detecting MPs in water samples highlights the significance of implementing precautionary actions to alleviate the potential health hazards they create.

Multi-color polymer carbon dots synthesized from waste polyolefins through phenylenediamine-assisted hydrothermal processing

The large accumulation and low recycling rates of polyolefin waste have posed a threat to the environment and human health. The shortage of chemical recycling methods for polyolefins strongly demands the development of new and sustainable treatment technologies for hydrocarbon plastics to improve their waste management. In this study, polyethylene (PE) and polypropylene (PP) were utilized for the preparation of multi-color polymer carbon dots (PCDs) via a two-step hydrothermal (HT) synthesis involving (i) thermo-oxidative degradation of polyolefins to precursors containing plentiful oxygen-based functional groups, and (ii) modification with phenylenediamine (PDA). The fluorescence of PCDs depends on the structure of isomeric PDA and PCDs modified by ortho-, meta-, and para-PDA emit blue, green, and yellow color fluorescence, respectively. The formation mechanism of PCDs, involving dehydrative condensation and amination of PE or PP-derived precursors by PDA, was proposed. The obtained PCDs were utilized for the detection and quantification of Fe3+ ions at ppm concentrations. The proposed strategy here aims to broaden the scope of the chemical recycling methods for polyolefin plastic waste as well as to develop a conversion route of polyolefin to value-added materials.

strain K30 latex clearing protein

Polyethylene is the most commonly used plastic product, and its biodegradation is a worldwide problem. Latex clearing protein derived from Streptomyces sp. strain K30 (LcpK30) has been reported to be able to break the carbon-carbon double bond inside oxidized polyethylene and is an effective biodegradation enzyme for polyethylene. However, the binding of the substrate to the enzyme was difficult due to the hydrophobic nature of polyethylene. Therefore, to further improve the efficiency of LcpK30, the effect of different anchor peptides on the binding capacity of LcpK30 to the substrate was screened in this study. The results of fluorescence confocal microscopy showed that the anchoring peptide LCI had the most significant improvement in effect and was finally selected for further application in a UV-irradiated PE degradation system. The degradation results showed that LCI was able to improve the degradation efficiency of LcpK30 by approximately 1.15 times in the presence of equimolar amounts of protein compared with wild-type. This study further improves the application of LcpK30 in the field of polyethylene degradation by modification.

Assessment of microplastic contamination in shrimps from the Bay of Bengal and associated human health risk

Microplastics (MPs) were analyzed in seven shrimp species Tiger shrimp (Penaeus monodon), Red tiger shrimp (Caridina cantonensis), Indian shrimp (Penaeus indicus), Red shrimp (Metapenaeus dobsoni), White shrimp (Penaeus merguiensis), Brown shrimp (Metapenaeus monoceros), and Roshna shrimp (Palaemon styliferus) collected from the Bay of Bengal. The abundance and characteristics of MPs were assessed in the gastrointestinal tract (GIT), which certainly translocated to the muscle of shrimp species. The highest MP abundance was found in C. cantonensis with 7.2 items/individual (25.3 items/g in the GIT and 6.3 items/g in muscle). The prominent types of MPs in shrimp samples were fibers (30 %) and fragments (29 %). The ingestion rate of MPs of black and transparent color was comparatively higher, with 64 % of the ingested MPs were < 100 μm. The primary polymer types detected based on Fourier Transform Infrared (FTIR) analysis were Low-Density Polyethylene (LDPE), High-Density Polyethylene (HDPE), Polymethyl Methacrylate (PMMA), Polyvinyl Chloride (PVC), Polypropylene (PP), and Ethylene Vinyl Acetate (EVA). Results from Scanning Electron Microscopy (SEM) showed rough surface textures and adhered particles on the MPs isolated from shrimps. The margin of exposure for females was 71.42, and for males, it was 80.64, indicating that women in Bangladesh are more likely to be exposed to MPs and face a higher risk than men. Sensitivity analysis revealed that MPs particle size was the most sensitive parameter. These findings provide a comprehensive understanding of MP ingestion, human exposure, and contamination in shrimps of Bangladesh, which can help future monitoring efforts.

Biodeterioration of polyethylene by Bacillus cereus and Rhodococcus equi isolated from soil

Polyethylene (PE), a non-biodegradable plastic, is widely used in agriculture as a mulch material, which causes serious plastic pollution when it is discarded. Recent studies have described the biodeterioration of PE by bacteria, but it is difficult for a single bacterial species to effectively degrade PE plastic. We isolated two strains with PE-degrading ability, Bacillus cereus (E1) and Rhodococcus equi (E3), from the soil attached to plastic waste on the south side of Mount Tai, China, using a medium with PE plastic as the only carbon source. By clear zone area analysis, we found that E1 mixed with E3 could improve the degradation of PE plastics. The mixture of E1 and E3 was incubated for 110 days in a medium containing PE and mulch film as the only carbon source, respectively. After 110 days, a decrease in pH and mass was observed. Obvious slits and depressions were observed on the surface of the PE film and the mulch films using scanning electron microscopy. The surface hydrophobicity of both films decreased, and FTIR revealed the formation of new oxidation groups on their surfaces during the degradation process and the destruction of the original CH2 long chains of PE. Besides, we found that surface of the mulch films contained more viable bacteria than the liquid medium. In conclusion, we identified two PE-degrading strains whose mixture can effectively degrade mulch film than pure PE film. Our results provide a reference for understanding PE plastic degradation pathways and their associated degradation processes.

Farmed stage (age)-dependent accumulation and size of microplastics in Litopenaeus vannamei shrimp reared in a super-intensive controlled system

The abundance of microplastics (MPs) in the gastrointestinal tract (GT), gills (GI), and exoskeleton (EX) of Litopenaeus vannamei shrimp cultured in a commercial indoor super-intensive controlled (ISCO) system was investigated. Shrimp of 25 days (postlarvae; PL25), and one, three, five, and seven culture months were analyzed. The postlarvae PL25 MP abundance per individual and gram of PL (wet weight) was 0.2 ± 0.0 MPs and 3.5 ± 0.5 MPs/g. For L. vannamei juveniles at one, three, five, and seven culture months, the MP abundance per juvenile shrimp was 10.0 ± 0.3, 27.2 ± 1.6, 32.3 ± 3.1, and 40.3 ± 3.6 MPs/individual, respectively (expressed in MPs/g of tissue were 1.6 ± 0.1, 2.0 ± 0.2, 2.0 ± 0.3 and 1.5 ± 0.2, respectively). Fibers were the most common MP type in all shrimp age classes (42.1-68.7 %), and the predominant color was transparent (46.1-65.0 %). The MP size in all shrimp stages ranged between 15 and 4686 μm. In general, the predominant polymers identified were PE (37.4 %), NY (21.1 %), and PET (18.5 %). The MP variability through the culture cycle showed that as the age of shrimp increased, and the culture advanced the MP abundance and size also augmented. Conversely, there is a higher MP abundance in L. vannamei cultured in ISCO systems compared to shrimp cultured in traditional semi-intensive and intensive ponds and those from wild environments. The latter is probably due to the extensive use of plasticized materials (geomembrane and greenhouse installations) and their degradation, which cause a greater MP exposure to shrimp. The estimated oral MP intake by ISCO shrimp consumption was 647 MPs/capita/year, which can be 178 % more than from wild shrimp.

Polylactic acid microplastics have stronger positive effects on the qualitative traits of rice (Oryza sativa L.) than polyethylene microplastics: Evidence from a simulated field experiment

Soil pollution by microplastics (MPs) from different types of agricultural films has received substantial attention due to its potential effects on crop quality. To date, the effects of different types of MPs on rice grain quality and their underlying molecular mechanisms have not been clarified. In this study, we examined the effects of polyethylene MPs (PE-MPs) and biodegradable polylactic acid MPs (PLA-MPs) on rice grain quality at the environmental level (0.5 %) and evaluated the molecular mechanism through transcriptome analysis. PE- and PLA-MPs increased the number of rice grains per plant by 19.83 % and 24.66 %, respectively, and decreased the rice empty-shell rate by 55.89 % and 26.53 %, respectively. However, PLA-MPs increased the 1000-seed weight by 11.37 %, whereas PE-MPs had no obvious impact in this respect. Furthermore, MP exposure, especially that of PE-MPs, affected the content of mineral elements, fatty acids, and amino acids of rice grains by disturbing the expression of genes related to these functions and metabolism. Our findings provide insights into the response of rice grains to the stress caused by different MPs.

Mechanistic interpretation of the sorption of terbuthylazine pesticide onto aged microplastics

Microplastics (MPs) pose a global concern due to their ubiquitous distribution. Once in the environment, they are subject to aging, which changes their chemical-physical properties and ability to interact with organic pollutants, such as pesticides. Therefore, this study investigated the interaction of the hydrophobic herbicide terbuthylazine (TBA), which is widely used in agriculture, with artificially aged polyethylene (PE) MP (PE-MP) to understand how aging affects its sorption. PE was aged by an accelerated weathering process including UV irradiation, hydrogen peroxide, and ultrasonic treatment, and aged particles were characterized in comparison to pristine particles. Sorption kinetics were performed for aged and pristine materials, while further sorption studies with aged PE-MP included determining environmental factors such as pH, temperature, and TBA concentration. Sorption of TBA was found to be significantly lower on aged PE-MP compared to pristine particles because aging led to the formation of oxygen-containing functional groups, resulting in a reduction in hydrophobicity and the formation of negatively charged sites on oxidized surfaces. For pristine PE-MP, sorption kinetics were best described by the pseudo-second-order model, while it was intra-particle diffusion for aged PE-MP as a result of crack and pore formation. Sorption followed a decreasing trend with increasing pH, while it became less favorable at higher temperatures. The isotherm data revealed a complex sorption process on altered, heterogeneous surfaces involving hydrophobic interactions, hydrogen bonding, and π-π interactions, and the process was best described by the Sips adsorption isotherm model. Desorption was found to be low, confirming a strong interaction. However, thermodynamic results imply that increased temperatures, such as those resulting from climate change, could promote the re-release of TBA from aged PE-MP into the environment. Time-of-flight secondary ion mass spectrometry (ToF-SIMS) confirmed TBA sorption onto PE.

Biodegradation of polystyrene and polyethylene by Microbacterium esteraromaticum SW3 isolated from soil

Plastic pollution is a common concern of global environmental pollution. Polystyrene (PS) and polyethylene (PE) account for almost one-third of global plastic production. However, so far, there have been few reports on microbial strains capable of simultaneously degrading PS and PE. In this study, Microbacterium esteraromaticum SW3, a non-pathogenic microorganism that can use PS or PE as the only carbon source in the mineral salt medium (MM), was isolated from plastics-contaminated soil and identified. The optimal growth conditions for SW3 in MM were 2% (w/v) PS or 2% (w/v) PE, 35°C and pH 6.3. A large number of bacteria and obvious damaged areas were observed on the surface of PS and PE products after inoculated with SW3 for 21 d. The degradation rates of PS and PE by SW3 (21d) were 13.17% and 5.39%, respectively. Manganese peroxidase and lipase were involved in PS and PE degradation by SW3. Through Fourier infrared spectroscopy detection, different functional groups such as carbonyl, hydroxyl and amidogen groups were produced during the degradation of PS and PE by SW3. Moreover, PS and PE were degraded into alkanes, ketones, carboxylic acids, esters and so on detected by GC-MS. Collectively, we have isolated and identified SW3, which can use PS or PE as the only carbon source in MM as well as degrade PS and PE products. This study not only provides a competitive candidate strain with broad biodegradability for the biodegradation of PS and/or PE pollution, but also provides new insights for the study of plastic biodegradation pathways.

Polyethylene microplastic modulates lettuce root exudates and induces oxidative damage under prolonged hydroponic exposure

Root exudates are pivotal in plant stress responses, however, the impact of microplastics (MPs) on their release and characteristics remains poorly understood. This study delves into the effects of 0.05 % and 0.1 % (w/w) additions of polyethylene (PE) MPs on the growth and physiological properties of lettuce (Lactuca sativa L.) following 28 days of exposure. The release characteristics of root exudates were assessed using UV-vis and 3D-EEM. The results indicated that PE increased leaf number but did not significantly affect other agronomic traits or pigment contents. Notably, 0.05 % PE increased the total root length and surface area compared to the 0.1 % addition, while a non-significant trend towards decreased root activity was observed with PE MPs. PE MPs with 0.1 % addition notably reduced the DOC concentration in root exudates by 37.5 %, while 0.05 % PE had no impact on DOC and DON concentrations. PE addition increased the SUVA254, SUVA260, and SUVA280 values of root exudates, with the most pronounced effect seen in the 0.05 % PE treatment. This suggests an increase of aromaticity and hydrophobic components induced by PE addition. Fluorescence Regional Integration (FRI) analysis of 3D-EEM revealed that aromatic proteins (region I and II) were dominant in root exudates, with a slight increase in fulvic acid-like substances (region III) under 0.1 % PE addition. Moreover, prolonged PE exposure induced ROS damage in lettuce leaves, evidenced by a significant increase in content and production rate of O2·-. The decrease in CAT and POD activities may account for the lettuce's response to environmental stress, potentially surpassing its tolerance threshold or undergoing adaptive regulation. These findings underscore the potential risk of prolonged exposure to PE MPs on lettuce growth.

Abundance and distribution of microplastics on sandy beaches of the eastern Moroccan Mediterranean coast

Microplastics (MPs) were investigated at 19 sandy beaches along the eastern Mediterranean Moroccan coast. Sediment samples (5 mm-63 μm) were analyzed to identify MPs abundance, size, shape, color and nature. MPs concentration ranged from 40 ± 7.4 to 230 ± 48.6 MPs kg-1; fibrous MPs were the most abundant (74.72 %), followed by fragments (20.26 %), films (3.27 %), pellets (1.42 %) and foams (0.33 %). Large MPs (1-5 mm) accounted for 58 %, while small (< 1 mm) for 42 %. The 1-2 mm fraction of sediments presented the greatest amounts (30.67 %) of MPs. Transparent (50 %) and blue (17 %) were most common colors and most of particles were angular and irregularly shaped. Fourier Transform Infrared Spectroscopy (FTIR) analysis showed that PE (Polyethylene), PS (Polystyrene) and PP (Polypropylene) and PVC (Polyvinyl chloride) were the most common polymers. These findings revealed a moderate level of microplastic pollution along the beaches of the eastern Moroccan Mediterranean coast.

Visualization and characterisation of microplastics in aquatic environment using a home-built micro-Raman spectroscopic set up

Microplastics (MP) which are tiny plastic particles of sizes range from 1 μm (μm) to 5 mm (mm), have become a growing cause of concern due to their widespread presence in the environment and their potential impacts on ecosystems and human health. Marine organisms have the potential to consume microplastics, which could lead to physical injuries, blockages, or the transfer of harmful substances up the food chain. Humans may indirectly consume microplastics through contaminated seafood and water, although the complete scope of health risks is currently under investigation. An essential step in gaining a comprehensive understanding of microplastic pollution in waterbodies is the identification of microplastics, which is also crucial for further development of effective environmental regulations to address its adverse impacts. Majority of the researchers are accomplishing it globally using commercial platforms based on Raman spectroscopy. However, the development of indigenous Raman systems, which can enable microplastic identification, particularly in developing nations, is the need of the hour due to the outrageous cost of commercial platforms. In the current study, a custom-designed micro-Raman spectroscopy system was developed to detect and characterize microplastics from waterbodies. The developed system enabled visualization, size measurement and characterization of microplastics. Experimental parameters were fine-tuned, and a standardized Raman database was established for each type of plastic. This system exhibited high resolution which was capable of analysing microparticles of size up to 5 μm. Principal component analysis was carried out on the experimental Raman data, demonstrating good classification amongst different kinds of plastics. The performance of the developed system in analysing real samples was evaluated through experiments conducted on water samples obtained from the shore of Malpe Beach in Udupi district. The results revealed the presence of polyethylene and polyethylene terephthalate in the samples, along with the detection of pigments like copper phthalocyanine and indigo blue.

Susceptibility of flexible plastic foodstuffs packaging against Monomorium indicum (Hymenoptera: Formicidae) household ants

Ants belonging to the Monomorium indicum (Formicidae: Hymenoptera) species are ubiquitous insects that are commonly associated with household settings in Pakistan. Packaged foodstuffs are easily destroyed by household ants when packaging is made with materials that have a high susceptibility. This study evaluated the susceptibility of three common flexible plastic packaging materials namely: opaque polyethylene, transparent polyethylene and polypropylene, which were each tested at thicknesses of 0.02 mm for their susceptibility against M. indicum. Except opaque polyethylene which is only available at 0.02 mm thickness, both transparent polyethylene and polypropylene were tested at higher thickness of 0.04 mm and 0.06 mm also against M. indicum. In order to simulate household settings, experiments were conducted at the faculty building of the agriculture and environment department of The Islamia University of Bahawalpur, Pakistan during summer vacations when the building was quiet. Different corners were selected near water sources for maximum exposure to the largest number of ants. Experimental cages used for the experiment were built with wood and 2 mm iron gauze to allow only ants to enter the cages. Daily activity of ants was used as an infestation source in cages. Experiments were run over three time spans of fifteen days each from June 20th 2022 to August 15th 2022. Results showed all packaging materials were susceptible against M. indicum at the 0.02 mm thickness level. Polypropylene was susceptible at 0.04 mm thickness but resistant to ants at 0.06 mm thickness, whereas polyethylene was still susceptible to ants at the higher thickness of 0.06 mm. Correlation of packaging damage with weather factors showed that temperature had a positive relationship, while relative humidity had a negative association with M. indicum attack. Overall correlation of packaging damage with packaging thickness showed packaging thickness was negatively associated with packaging damage from the ants. Because major cutting role is performed by the mandibles, we studied mandibles of ants and three frequent pests of packaged foodstuff namely Rhyzopertha dominica, Tribolium castaneum and Trogoderma granarium. The results showed that ants had the largest mandible and frontal mandibular tooth lengths compared with the mandibles and frontal teeth of the common stored product pests, indicating M. indicum household ants have a higher pest status for packaged foodstuffs compared to common stored product pests. Although the thickness of the flexible plastic packaging was a major factor against household ants, the study results recommend the use of polypropylene with a thickness of at least 0.06 mm as foodstuff packaging against household ants compared with polyethylene packaging, which was found to be susceptible to ants even at 0.06 mm thickness.

Feeding responses of reef-building corals provide species- and concentration-dependent risk assessment of microplastic

The negative impacts of microplastic on reef-building corals are often attributed to the feeding responses to these particles. Although reactions to and ingestion of microplastic are frequently reported, a quantitative comparison to natural particles and of the factors influencing these responses is largely missing. Thus, this study aims to compare the feeding rates of corals to microplastic and natural particles, considering factors influencing these responses. Specifically, we I) studied the feeding responses of corals to microplastic, natural food, and non-food particles, II) examined the influence of biotic factors (i.e., biofilm on the particles and presence of natural food), III) evaluated species-specific differences in feeding responses to microplastic particles, and IV) applied a toxicodynamic model for species- and concentration-dependent risk assessments. We assessed the feeding responses of 11 coral species, spanning different life-history strategies and growth forms in experimental feeding trials. The results showed that the feeding responses of corals to microplastic differ from those to naturally occurring particles. Reactions to microplastic and natural food occurred equally often, while sand was more frequently rejected. Yet, the ingestion process was much more selective, and microplastic was ingested less frequently than natural food. The presence of a biofilm and natural food had activating effects on the feeding behavior of the corals on microplastic. Generally, coral species that exhibit a higher degree of heterotrophic feeding also reacted more often to microplastic. The species- and concentration-dependent toxicodynamic risk model built on these data reveals that most tested coral species are unlikely to be at risk under present environmental concentration levels. However, highly heterotrophic feeders, such as Blastomussa merleti, or generally vulnerable species, such as Pocillopora verrucosa, need special consideration. These findings help to better evaluate the responses of corals to microplastic and their risk in an increasingly polluted ocean.

Evaluation of microplastic pollution and risk assessment in a tropical monsoonal estuary, with special emphasis on contamination in jellyfish

Estuaries, which serve as vital links between land and coastal ecosystems, play a significant part in facilitating the transfer of plastic waste from the land to the ocean. In this research, we examined the prevalence, characteristics, and ecological risks of microplastics (MPs) in the extensively urbanized Cochin Estuarine System (CES), India. Additionally, it represents one of the initial evidence-based examinations of MPs ingestion by jellyfish in Indian waters, focusing on Acromitus flagellatus, Blackfordia virginica, and Pleurobrachia pileus species. The abundance of MPs found in the surface water of the Cochin Estuarine System (CES) varied between 14.44 ± 9 to 30 ± 15.94 MP/m3, with an average of 21.6 ± 11 MP/m3. In both surface waters and jellyfish from the Cochin Estuarine System (CES), fibers were the most prevalent type of MPs, with polyethylene (PE), polypropylene (PP), and polyamide (PA) being the most common polymer varieties. To evaluate the current levels of MPs and their effect on the CES, the Pollution Load Index (PLI), Potential Ecological Risk Index (PERI), and Polymeric Risk Index (H) were utilized. The high PLIestuary values (20.33), high Hestuary values (234.02), and extreme PERIestuary value (1646.06) indicate that the CES is facing an extreme ecological risk. Among the 280 jellyfish individuals examined, 118 (42.14%) were recognized to contain MPs with an average of 1.54 ± 2.68 MPs/individual. Pearson bivariate analysis revealed a significant correlation between the jellyfish bell size and number of plastics per individual. Comparison between jellyfish species revealed, the majority (66%) of the MPs identified in jellyfish were from A. flagellatus and 44 among the 50 jellyfish examined (88%) had MPs. These findings suggest that A. flagellatus may be a potential sink for MPs and may be utilized to be a bioindicator for monitoring MPs contamination in estuarine systems, aiding in future plastic pollution mitigation efforts.

Sublethal effects induced by different plastic nano-sized particles in Daphnia magna at environmentally relevant concentrations

A growing number of studies have reported the toxic effects of nanoplastics (NPs) on organisms. However, the focus of these studies has almost exclusively been on the use of polystyrene (PS) nanospheres. Herein, we aim to evaluate the sublethal effects on Daphnia magna juveniles of three different NP polymers: PS-NPs with an average size of 200 nm, polyethylene [PE] NPs and polyvinyl chloride [PVC] NPs with a size distribution between 50 and 350 nm and a comparable mean size. For each polymer, five environmentally relevant concentrations were tested (from 2.5 to 250 μg/L) for an exposure time of 48 h. NP effects were assessed at the biochemical level by investigating the amount of reactive oxygen species (ROS) and the activity of the antioxidant enzyme catalase (CAT) and at the behavioral level by evaluating the swimming behavior (distance moved). Our results highlight that exposure to PVC-NPs can have sublethal effects on Daphnia magna at the biochemical and behavioral levels. The potential role of particle size on the measured effects cannot be excluded as PVC and PE showed a wider size range distribution than PS, with particles displaying sizes from 50 to 350 nm. However, we infer that the chemical structure of PVC, which differs from that of PE of the same range size, concurs to explain the observed effects. Consequently, as PS seems not to be the most hazardous polymer, we suggest that the use of data on PS toxicity alone can lead to an underestimation of NP hazards.

Deciphering fluorescent and molecular fingerprint of dissolved organic matter leached from microplastics in water

Despite extensive research into the presence and behavior of microplastics (MPs) in the environment, limited attention has been given to the investigation of the characteristics of dissolved organic matter (DOM) that leaches from MPs (MPs-DOM). Herein, two frequently encountered plastic particles in aquatic environments, specifically polyethylene terephthalate (PET)- and polyethylene (PE)-MPs, were subjected to leaching in the aquatic settings for seven days, both in the absence of light and under UV irradiation. Measurements of dissolved organic carbon (DOC) indicated that UV exposure enhanced the liberation of DOM from PET-MPs, while PE-MPs did not exhibit such leaching. After UV treatment for seven days, the DOM released from PET-MPs increased by 25 times, while that from PE-MPs remained almost unchanged. Then, the molecular diversity and the evolving formation of DOM originating from different MPs were comprehensively analyzed with fluorescence excitation-emission matrix (EEM) and Fourier transform ion cyclotron resonance mass spectrometry (FT-ICR-MS). Specifically, both PET- and PE-DOM exhibited three fluorescence signatures, with the predominant C1 (tryptophan-like) component showing a decline in PET-DOM and a rise in PE-DOM during aging. The FT-ICR-MS analysis unveiled that PET-DOM grew more recalcitrant under UV exposure, while PE-DOM became increasingly labile. In brief, UV irradiation influences MPs-DOM release and transformation differently, depending on the plastic composition. This highlights the significance of exploring MPs-DOM transformation in securing environmental safety.

Enabling Polymer Single Crystals to Be High-Performance Dielectric

Semicrystalline polymer dielectrics (SPDs) are highly sought-after state-of-the-art dielectric materials. As the disorder in SPDs degrades their electrical properties, homogeneously ordered SPDs are desired. However, complex crystallization behaviors of polymers make such homogeneity elusive. Polymer lamellar single crystals (PLSCs), the most regularly-ordered form of SPDs possible under mild crystallizing conditions, are ideal platforms for understanding and developing high-performance dielectric materials. Here, a typical and widely used SPD, polyethylene (PE) is selected as the model material. We successfully obtained, large, uniform, and high-quality PE PLSCs and devised a non-destructive strategy to construct PE PLSC-based vertical capacitors. These nanometer-thick capacitors exhibit exceptional dielectric properties, with a high breakdown strength of 6.95 MV/cm and a low dielectric constant of 2.14±0.07, that outperform the properties of any existing neat PE. This work provides novel insights into exploring the performance possibility of ordered SPDs and reveals the PLSCs as potential high-performance dielectric materials.

Microplastic removal in batch and dynamic coagulation-flocculation-sedimentation systems is controlled by floc size

Most studies examining the removal of microplastics (MPs) during controlled bench-scale trials have applied high coagulant dosages, which are characteristic of sweep flocculation. As such the impact of other typical operating conditions remains largely unknown. The use of bench-scale jar testing is ubiquitous in the literature, however the hydrodynamics of a batch-type approach bear little resemblance to full-scale treatment processes. In this study, a range of microplastics sizes and types were employed to assess their removal via conventional jar tests as well as to compare results to a continuous-flow bench-scale system. Jar tests were performed to identify pH values and alum dosages that are optimal for MP reduction when considering a range of coagulation conditions. The production of large and readily settling aluminum hydroxide (Al(OH)3) floc represented the dominant condition driving MPs removal. However, total MP removal was observed to be lower during continuous-flow trials when compared to jar tests, suggesting that direct extrapolation of results from jar tests may overpredict performance observed at full-scale. Irrespective of microplastic type and size, strong correlations were observed between MP concentration and turbidity reduction, indicating that turbidity may potentially serve as a very useful surrogate. Significant correlations were observed when comparing both floc size, especially 90th percentile floc diameter, and concentration of floc >100 μm to the reduction of MPs.

Responses of lettuce (Lactuca sativa L.) growth and soil properties to conventional non-biodegradable and new biodegradable microplastics

Residual plastic films in soils are posing a potential threat to agricultural ecosystem. However, little is known about the impacts of microplastics (MPs) derived from biodegradable and non-biodegradable plastic films on plant-soil systems. Here, we carried out a pot experiment using soil-cultivated lettuce treated by two types of MPs, degradable poly(butylene adipate-co-terephthalate) (PBAT-MPs) and non-biodegradable polyethylene (PE-MPs). MPs resulted in different degrees of reduction in shoot biomass, chlorophyll content, photosynthetic parameters, and leaf contents of nitrogen (N), phosphorus (P), and potassium (K), accelerated accumulation of hydrogen peroxide and superoxide, and increased malondialdehyde content in lettuce leaves. Moreover, MPs obviously decreased contents of total N, nitrate, ammonium, and available K in soils, and increased available P, thus altering soil nutrient availability. MPs also significantly decreased proportions of macroaggregates, and decreased soil electrical conductivity and microbial activity. PBAT-MPs had significantly greater impacts on oxidative damage, photosynthetic rate, soil aggregation, microbial activity, and soil ammonium than those of PE-MPs. Our results suggested that MPs caused oxidative damages, nutrient uptake inhibition, soil properties alteration, ultimately leading to growth reduction, and PBAT-MPs exhibited stronger impacts. Therefore, it is urgent to further study the ecological effects of MPs, especially biodegradable MPs, on soil-plant systems.

Polyethylene upcycling to aromatics by pulse pressurized catalytic pyrolysis

To address the challenging issues of waste plastic pollution and petroleum shortage, we report herein a pulse pressurized catalytic pyrolysis process where polyethylene is continuously converted into aromatics using HZSM-5 catalyst incorporated with hydrated SiO2. Pressurization improves the activity of single-pulse pyrolysis of polyethylene by 14.42%. In contrast to the linear decrease of BTEXS relative yield with a K value of - 0.23 under non-pressurized conditions, pressurization results in a notable stability in the latter stage, characterized by a K value of only - 0.063. Comprehensive catalyst characterization demonstrates that pressurization promotes the release of water from hydrated SiO2, enabling HZSM-5 to effectively undergo dealumination and obtain suitable acidity and pore structure, and ultimately enhancing the resistance to carbon deposition. In summary, pressurization improves both pyrolysis activity and catalysis stability, offering a promising strategy for the high-value utilization of waste plastics.

Tibial polyethylene post fractures at ten-years in a bicruciate stabilised (BCS) total knee arthroplasty design

INTRODUCTION

This short paper reports a potential emerging mode of failure in three patients with a bicruciate stabilised (BCS) total knee arthroplasty.

METHODS

Three patients presented to our institution with late instability ten years after undergoing total knee arthroplasty (Journey BCS) and were asymptomatic up to this point. Retrieval analysis was performed by an external body commissioned by the NHS and all three cases were reported to the UK Medicines and Healthcare Products Regulatory Agency (MHRA).

RESULTS

Two patients were revised through simple exchange with a polyethylene tibial insert. One patient underwent a full revision of femoral and tibial components. Intra-operative findings revealed that the polyethylene post had fractured in an identical manner in all three cases. Retrieval analysis demonstrated posterior impingement and wear of the polyethylene post resulting in fatigue failure.

CONCLUSIONS

This short paper highlights a potential emerging mode of failure with Journey BCS that requires wider dissemination to raise awareness among surgeons and calls for long-term follow up of those patients who received this specific implant. Early revision with polyethylene exchange is a successful treatment in patients when femoral and tibial components are well-positioned and well-fixed.

Aseptic loosening of the option stemmed tibial tray in the Zimmer NexGen LPS total knee arthroplasty system

BACKGROUND

We investigated the relationship between the backside deformation of polyethylene (PE) tibial inserts and aseptic loosening of the Option stemmed tibial tray used with Zimmer NexGen posterior-stabilised (PS) devices. We hypothesized that explanted inserts used in PS designs would exhibit greater extents of PE backside deformation than those used in equivalent cruciate retaining (CR) designs and that PE inserts retrieved from total knee arthroplasties (TKAs) revised for aseptic tibial tray loosening would exhibit greater extents of backside deformation than TKAs revised for other reasons.

METHODS

A total of 73 explanted fixed-bearing TKAs (42 CR and 31 PS) were examined. PE components underwent geometric examination with a coordinate measuring machine using validated techniques. Multiple regression modelling was used to identify variables associated with revision secondary to aseptic loosing and to determine factors associated with increased PE backside deformation.

RESULTS

PE inserts retrieved from TKAs with aseptic loosening had significantly greater backside deformation than those retrieved from TKAs revised for other reasons (p < 0.001). Greater PE backside deformation was significantly associated with larger tray/insert clearance heights (p < 0.001), thinner inserts (p < 0.001) and PS TKAs (p = 0.001).

CONCLUSION

PE backside deformation was significantly greater in the PS TKAs. This may provide one explanation for the increased rate of aseptic loosening reported with the Option tibial tray used with the Legacy Posterior Stabilised (LPS) system.

Determination of hydrogen gas by 1,4-bis(phenylethynyl)benzene hydrogenation coupled with gas chromatography-mass spectrometry

Knowing the H2 concentration released from polymer materials is essential to understand the degradation degree of polymer materials. In this study, a novel strategy of 1,4-bis(phenylethynyl)benzene (DEB) hydrogenation in combination with gas chromatography - mass spectrometry (GC-MS) determination of hydrogen gas (H2) was developed. In this strategy, DEB was utilized to react with H2 for establishing the quantitative analysis method of H2. A H2 analysis platform that could accurately control H2 concentration was designed and fabricated to be used to establish the quantitative method of H2. The linear regression curve was established between the H2 standard and the MS signal of the reaction products on GC-MS. Finally, the H2 released from polyethylene under gamma radiation was detected by this method. This method could be a powerful auxiliary tool for studying the content changes of H2.

Leaching and transformation of chemical additives from weathered plastic deployed in the marine environment

Plastic pollution causes detrimental environmental impacts, which are increasingly attributed to chemical additives. However, the behaviour of plastic additives in the marine environment is poorly understood. We used a marine deployment experiment to examine the impact of weathering on the extractables profile, analysed by liquid chromatography-mass spectrometry, of four plastics at two locations over nine months in Aotearoa/New Zealand. The concentration of additives in polyethylene and oxo-degradable polyethylene were strongly influenced by artificial weathering, with deployment location and time less influential. By comparison, polyamide 6 and polyethylene terephthalate were comparatively inert with minimal change in response to artificial weathering or deployment time. Non-target analysis revealed extensive differentiation between non-aged and aged polyethylene after deployment, concordant with the targeted analysis. These observations highlight the need to consider the impact of leaching and weathering on plastic composition when quantifying the potential impact and risk of plastic pollution within receiving environments.

Microplastics - A major contaminant in marine macro algal population: Review

Microplastics (MPs) are a significant concern in this modern environment, and the marine environment is a sink for them now. Researchers have taken an interest in marine microplastic studies recently, which has opened the door to research in macroalgae and microalgae. Macroalgae are the primary producers in maritime ecosystems and are economically significant. This review aimed to identify the microplastic interactions with marine macroalgae and the impacts of microplastics on macroalgae based on existing literature while also recognizing knowledge gaps. MPs were mostly fibers and polymers with notable production and application levels; their abundance differed among species. More MPs were found in filamentous species than in other types. The results of this study indicated that, in maritime environments, macroalgae contribute to MP biomagnification and bioaccumulation. Adequate studies are needed to fill the research gaps in this area of MPs in macroalgae and their effects.

STAR® total ankle replacements with BONIT® coating: A prospective 2-17 year follow-up study of 474 ankles from a single center

BACKGROUND

Different coatings of the metal implants of STAR prostheses have been used since 1999. In Europe metal implants with a double calcium-phosphate coating (BONIT) on a titanium sprayed surface have been available since 1999.

METHODS

We present a 2-17 year follow-up of a consecutive series from a single center with 474 STAR ankle replacements where the BONIT type of coating has been used.

RESULTS

55 prostheses (12%) have been revised, the majority of them due to fracture of the mobile bearing. 22 prostheses (5%) have been converted to an arthrodesis. Analysis of survival of the specific components showed an estimated 10-year survival rate of the tibia component, talus component and polyethylene mobile bearing of 99%, 98% and 84%, respectively. The corresponding estimated 15-year survival was 98%, 98% and 74%, respectively.

CONCLUSION

This study showed an extraordinary high survival rate of the metal implants.

LEVEL OF EVIDENCE

Level III, prospective cohort series.

Microplastics contamination in two species of gobies and their estuarine habitat of Indian Sundarbans

Sundarbans, a Ramsar site of India is contaminated with heterogeneous microplastic wastes. Boddart's goggle eye mudskipper and Rubicundus eelgoby, were common gobies of Sundarbans estuary which accumulated microplastics during their normal biological activities. We estimated the abundance of microplastics in water, sediment; skin, gills, bucco-opercular cavity and gastrointestinal tract of these two goby fishes. Microplastic load estimated in gobies were 0.84 and 2.62 particles per fish species with a dominance of transparent, fibrous microplastics with 100-300 μm in length. ATR-FTIR and Raman spectroscopy revealed polyethylene as prevalent polymer. Surface degradations and adsorption of contaminants on microplastic surface were investigated by SEM-EDX analysis. Presence of hazardous polymers influenced high polymer hazard index and potential ecological risk index which indicated acute environmental threat to Sundarbans estuary and its resident organisms. Current study will provide a new information base on the abundance of microplastics and its ecological hazard in this biosphere reserve.

Characterization of Priestia megaterium S1, a polymer degrading gut microbe isolated from the gut of Tenebrio molitor larvae fed on Styrofoam

This study reveals that Tenebrio molitor larvae are fed with two different feeds i.e., barley bran along with Styrofoam, and barley bran without Styrofoam, the survival percentage of mealworms shows 86 and 89%, respectively. Five isolates namely S1, S2, S3, S4, and S5 were isolated from the gut of Styrofoam-feeding Tenebrio molitor larvae and tested for Hydrophobicity percentage, clear zone assay and turbidity measurement. S1 isolate showed best (turbidity percentage of 19.65%, 13.54% hydrophobicity percentage, and 37% zone of clearance) when compared to other isolates, respectively. 16S rRNA characterization of S1 isolate revealed that the isolate belongs to Priestia megaterium S1(ON024787). Biodegradation of PE and PS beads by Priestia megaterium S1 makes physical and structural changes over 180 days, after microbial adhesion to the beads. Growth parameters have shown that the Priestia megaterium S1 thrives more effectively in the pH (6.5), temperature (28 °C) and at 1.5% LDPE/HDPE/PS concentration there is maximum utilization of carbon and a high percentage survival rate. Significant colonization of the isolate after 30 days over beads of LDPE (52.47%), HDPE (49.26%), and PS (48.11%), respectively. Experimental data revealed that Priestia megaterium S1 have PE and PS beads degradation capacity, proven by weight loss studies, at 6th-month percentage weight loss of LDPE (36.1%), HDPE (31.9%), and PS (28.6%), the percentage loss of carbon and hydrogen shows higher when compared to control. One month Biological Oxygen Demand (BOD) showed that LDPE (7.4 mg/l), HDPE (7.2 mg/l), PS (6.7 mg/l), and simultaneous studies on CO2 evolution over LDPE treatment is 5.05 g/l, HDPE (4.26 g/l), and PS (3.91 g/l), respectively. Fourier Transform Infrared Spectroscopy (FTIR) and Scanning Electron Microscope (SEM) prove the occurrence of biodegradation on the surface of beads. This work highlights that Priestia megaterium S1 plays a vital role in effectively degrading PE and PS beads.

Middle concentration of microplastics decreasing soil moisture-temperature and the germination rate and early height of lettuce (Lactuca sativa var. ramosa Hort.) in Mollisols

Microplastics (MPs) have been widely found in soils, however, the mechanism of MPs influencing plant growth is still debated and possibly attributed to the soil environment changed by MPs. In this study, 0.0 %, 0.1 %, 0.5 %, 1.0 %, 2.0 %, and 5.0 % (w/w) content of low-density polyethylene MPs (LDPE-MPs) with the particle sizes of 75-2000 μm was used to test how MPs alter the germination and the early growth of lettuce (Lactuca sativa var. ramosa Hort.) in Mollisols under both natural condition and regular incubation condition. Soil temperature (ST), soil moisture (SM) and the ratio of cracks area to surface soil area (CA) and cracks length to surface soil area (CL) were monitored. As well, the dynamics of water and nutrient infiltration reported by our previous publication were combined to analyze the relationship between soil properties and crop growth influenced by MP concentration. The main results showed that: (1) compared with CK (0.0 %), the germination and plant height of lettuce were lowest in treatments with the middle concentration of MPs (0.5 % and 1 %, w/w), but was highest in treatments of high concentration of MPs (5.0 %, w/w) during the whole 14 days of incubation; (2) increasing MP concentration weakened the influence of SM on ST in Mollisols; (3) the average of SM and ST were highest at 5 % of MP concentration, while was lowest at 0.5 % and 1 % of MP concentration from the 2nd to the 9th day; (3) compared with CK and other treatments, the CA and CL were lowest in 1.0 % MP concentration, but were highest in 0.1 % and 5.0 % of MP concentration. This study provides insight that middle, rather than high and low levels of MP concentration, significantly decrease the SM and ST and increase nitrogen leaching which further leads to negative impacts on emergent and early growth of crops in soils with heavy texture (Mollisols).

Terrestrial Isopods Generate Microplastics from Low-Density Polyethylene Without Effects on Survival

With concern growing regarding the impact of microplastics (MPs) on terrestrial ecosystems, it is important to assess the role invertebrates may play in the fate of MPs within these ecosystems. Commonly, MPs enter these environments through improperly discarded waste or the application of treated biosolids and/or wastewater on agricultural soils. The present study investigated whether three species of terrestrial isopod (Porcellio scaber, Porcellio laevis, and Porcellionides pruinosus) ingest plastic debris and generate MPs during exposures varying from 24 h to 14 days and whether this may have an adverse effect on their health. Test vessels were designed to expose isopods to plastic fragments in the form of polyethylene plastic foam. Isopods were exposed to plastic that was either (1) pristine, or (2) weathered in a soil and water solution prior to incorporation in test vessels. When exposed to weathered polyethylene, all three species generated MPs (minimum-maximum size values for all durations inclusive: P. laevis = 114-1673 µm, P. scaber = 99-1635 µm, P. pruinosus = 85-1113 µm) through the consumption of macroplastic fragments with no observed impact on their health. In the shorter-duration exposures, the number of MPs generated by the isopod species in the present study was highly variable between experimental vessels (minimum-maximum generated MPs for 14-day exposure: P. laevis = 25-420, P. scaber = 50-583, P. pruinosus = 48-311). However, as the exposure durations increased, there was a clear trend of increasing MP generation, indicating that the isopods continued to consume the plastic fragments as long as the surface was weathered. A significant difference in the size of generated MPs was observed as well, with smaller isopod species generating smaller MP fragments on average. The results of the present study confirm that certain species of isopod can contribute to the generation of MPs, which constitutes an additional pathway of MP exposure to soil ecosystems. Environ Toxicol Chem 2024;00:1-9. © 2023 The Authors. Environmental Toxicology and Chemistry published by Wiley Periodicals LLC on behalf of SETAC.

Prepared microplastics interaction with Artemia salina under low pH conditions representing ocean acidification; a simulated environmental exposure

Ocean acidification and microplastic pollution are two of the major ecological concerns. The distribution of large quantities of plastic debris and microplastics all across the oceans emphasises the need to determine the influence of microplastics in ocean acidification and to evaluate its concomitant toxicological effects on aquatic life forms. Studies on the combined impact of both the stressors are very limited, but much needed in the current scenario. Where most of the present-day research use purchased microplastics of defined size and morphology (microspheres, fibres, rods, etc.), the present study employs prepared "true to life microplastics" that resemble the environmental microplastic pollutants in morphology and size heterogeneity. The present study focusses on evaluating the fate and impact of oceanic microplastics on the physiology and development of Artemia salina (Brine shrimp), one among the most ecologically significant zooplankton species. Natural sea water was acidified by controlled perturbation of carbon dioxide using a valve system. The hatching rate of A. salina cysts receded significantly (p < 0.05) upon singular exposures to microplastics and low pH (7.80), whereas combined effect was insignificant. The reactive oxygen species (ROS) elevated as a result of individual exposures to microplastics and low pH. However, only in 0.5 mg mL-1 PE treatments at pH 7.80, an additive impact was reported for ROS activity (p < 0.05). The SOD activities increased significantly but it can be attributed as the individual responses towards exposure to both the stressors. A significant additive impact was not observed for SOD activity (p > 0.05). But during the development, significant morphological anomalies were observed. Changes in the appendages of nauplii and juveniles as a result of combined exposure to microplastics and low pH treatments are significant findings. Our observations suggest that coupled exposure to microplastics and low pH could induce significant oxidative stress in the marine zooplanktons and also adversely affect their normal development. Findings from the current study emphasise the need for further research to understand the coupled toxicological impacts of ocean acidification and predominant pollutants such as microplastics to other marine animals as well.

Transects of polycyclic aromatic hydrocarbons and organochlorine pesticides in an urban estuary using passive samplers

Hydrophobic organic contaminants (HOCs) are tracers of anthropogenic impacts, which can negatively affect water quality. The relative importance of new emissions versus the remobilization of HOCs from legacy reservoirs is not well constrained. Polyethylene passive samplers were deployed in vertical profiles at four sites to determine the concentrations and gradients of atmospheric and freely dissolved polycyclic aromatic hydrocarbons (PAHs) and freely dissolved organochlorinated pesticides (OCPs) in Narragansett Bay, an urban estuary. The concentrations of the sum of 20 PAHs ranged from 4.3 to 240 ng/m3 in the air and 3.2-21 ng/L in the water column, dominated by phenanthrene and pyrene. OCP concentrations varied from below the detection limit to 150 ng/L in the water column. Common OCPs included α-hexachlorocyclohexane, hexachlorobenzene, and aldrin. Gradients displayed net deposition for PAHs, but equilibrium through the water column. Results from this study provided evidence that key OCPs displayed mostly similar concentrations (at or near equilibrium) in the water at both Conimicut Point and Block Island.

Biodegradation of low-density polyethylene (LDPE) through application of indigenous strain Alcaligenes faecalis ISJ128

The resiliency of plastic products against microbial degradation in natural environment often creates devastating changes for humans, plants, and animals on the earth's surface. Biodegradation of plastics using indigenous bacteria may serve as a critical approach to overcome this resulting environmental stress. In the present work, a polyethylene degrading bacterium Alcaligenes faecalis strain ISJ128 (Accession No. MK968769) was isolated from partially degraded polyethylene film buried in the soil at plastic waste disposal site. The biodegradation studies were conducted by employing various methods such as hydrophobicity assessment of the strain ISJ128, measurement of viability and total protein content of bacterial biofilm attached to the polyethylene surface. The proliferation of bacterial cells on polyethylene film, as indicated by high growth response in terms of protein content (85.50 µg mL-1) and viability (1010 CFU mL-1), proposed reasonable suitability of our strain A. faecalis ISJ128 toward polyethylene degradation. The results of biodegradation assay revealed significant degradation (10.40%) of polyethylene film within a short period of time (i.e., 60 days), whereas no signs of degradation were seen in control PE film. A. faecalis strain ISJ128 also demonstrated a removal rate of 0.0018 day-1 along with half-life of 462 days. The scanning electron microscope (SEM) and Fourier transform infrared (FTIR) spectroscopy studies not only displayed changes on polyethylene surface but also altered level of intensity of functional groups and an increase in the carbonyl indexes justifying the degradation of polyethylene film due to bacterial activity. In addition, the secondary structure prediction (M fold software) of 16SrDNA proved the stable nature of the bacterial strain, thereby reflecting the profound scope of A. faecalis strain ISJ128 as a potential degrader for the eco-friendly disposal of polyethylene waste. Schematic representation of methodology.

The molecular level degradation state of drift plastics in the Sea of Japan coastline

Polyethylene (PE) and polyethylene terephthalate (PET) are among the most abundant plastics polluting the oceans. However, their environmental fate depends on how they have been weathered. Due to its unique geography, the Sea of Japan is a pollution hotspot where plastics accumulate. In this study, the structures of plastics, having drifted into the Sea of Japan coastline environment, were analyzed with a particular focus on examining polymer crystallization and carbonyl formation; two factors which influence microplastic formation and the adsorption of contaminants onto plastic surfaces. PE in the coastal environment did not show evidence of crystallization, although carbonyl formation did increase. By contrast, PET bottles were shown to not be uniform in structure, with unaged bottles being less crystalline in the neck component compared to the body. Because of this difference, in environmental PET bottles, it was the bottle neck that showed increases in crystallization and carbonyl group formation.

Biofilm formation promoted biodegradation of polyethylene in Gordonia polyisoprenivorans B251 isolated from bacterial enrichment acclimated by hexadecane for two years

Polyethylene (PE) mulch films have been widely used in agriculture and led to a significant pollution in cultivated soils. It is desirable to develop the sustainable method for the degradation of PE. As an environment friendly approach, microbial or enzymatic degradation of PE could meet this demanding. Thus, more microbial strains are required for illustrating biodegrading pathway and developing efficient biological method. In this study, Gordonia polyisoprenivorans B251 capable of degrading PE was isolated from bacterial enrichment with hexadecane as a sole carbon source for two years, in which genus Gordonia had dominated. As revealed by microbial growth curve, the strain B251 had the highest growth rate than other tested strains in the mediums either with hexadecane or PE particles as sole carbon source. The formation of biofilms in both enriched culture and G. polyisoprenivorans B251 pure culture attached to PE film was observed. The capability for PE degradation of individual strain was screened by 30-day incubation with PE film and confirmed by the presence of hydroxyl, carbonyl, carbon-carbon double bond and ether groups in FT-IR analysis and cracks on the surface of PE film observed by scanning electron microscopy (SEM). Therefore, Gordonia polyisoprenivorans, reported as their degradation of environmental contaminants in previous study, were also identified in current study as a candidate for polyethylene biodegradation.

Combined effects of a high-fat diet and polyethylene microplastic exposure induce impaired lipid metabolism and locomotor behavior in larvae and adult zebrafish

Microplastics (MP), tiny plastic particles, can be ingested by fish through their habitat or contaminated food sources. When combined with a high-fat diet (HFD), MP exposure may lead to increased MP accumulation in fish and negative impacts on their health. However, the underlying mechanisms of how MP and HFD interact to promote fat accumulation in fish remain poorly understood. In this study, we aimed to evaluate the combined effect of HFD and polyethylene MP (PE-MP) in the zebrafish model (Danio rerio) and decipher its molecular mechanisms. Adult zebrafish exposed to the combined HFD and PE-MP showed elevated lipid accumulation, total cholesterol, triglycerides, and abnormal swimming behavior compared to HFD-fed fish. Histological and gene expression analysis revealed severe hepatic inflammation and injury, resembling nonalcoholic fatty liver disease (NAFLD) in the HFD + PE-MP exposed zebrafish. Moreover, HFD and PE-MP exposure upregulated genes related to lipogenesis (SREBP1, FAS, and C/EBPα) and inflammation (tnfα, il1β, and il-6) in the liver. These findings underscore the interactive effect of environmental pollutants and fish diet, emphasizing the importance of improving fish culture practices to safeguard fish health and human consumers from microplastic contamination through the food chain. This research sheds light on the complex interactions between microplastics and diet, providing valuable insights into the potential risks of microplastic pollution in aquatic ecosystems and the implications for human health. Understanding the underlying molecular mechanisms will contribute to international research efforts to mitigate the adverse effects of microplastics on both environmental and public health.

Ethanol, not water, should be used as the dispersant when measuring microplastic particle size distribution by laser diffraction

Size distribution is a crucial characteristic of microplastics (MPs). A typical method for measuring this property is wet laser diffraction. However, when measuring size distributions of MPs, despite it being a poor dispersant for many MPs, water is commonly selected, potentially limiting the reliability of reported measurements. To evaluate dispersant suitability, different aqueous concentrations of ethanol (0, 10, 20, 30, 40, 50, 75, 100 wt%) and aqueous solutions of 0.001 wt% Triton X-100 and a mixture comprising 10 wt% sodium pyrophosphate and 10 wt% methanol were used as dispersants in a laser granulometer (Mastersizer 2000) to determine particle size distributions (PSDs) of granular polyethylene MP35, MP125 and MP500 particles (nominally <35, <125 and, < 500 μm in size). The reliability of the PSDs depended on the dispersant used and size of primary MPs. With increasing ethanol concentrations, PSD curves of MP35 particles shifted from multi-modal to mono-modal distributions. The measured size distribution reduced from 1588.7 to 4.5 μm in water to 39.9 to 0.1 μm in 100 wt% ethanol. Generally, as ethanol concentration increased, uncertainty associated with the PSD parameters decreased. Although Triton X-100 and the mixed solution also showed better dispersion than water, measured particle sizes and coefficient of variation (COV, %) were notably larger than those for 100 wt% ethanol. Similar trends were observed for larger-sized MP125 and MP500 particles, but differences in PSD curves, PSD parameters, and COV (%) among dispersants were less pronounced. In all dispersants, the volume weighted mean diameters (VWMD) in 100 wt% ethanol (MP35: 14.1 μm, MP125: 102.5 μm, MP500: 300.0 μm) were smallest and close to diameters determined from microscope observations (MP35: 14.6 μm, MP125: 109.0 μm, MP500: 310.6 μm). Therefore, for accurate determinations of the PSDs of MP by wet laser diffraction, ethanol rather than water should be used as the dispersant.

Microplastic transport dynamics in surcharging and overflowing manholes

The transport of microplastics within urban water systems remains poorly understood, with little prior research on their behaviour within manhole configurations. This study represents the first to measure and model the transport dynamics of microplastics within circular and square manholes under different hydraulic scenarios. The transport and fate of polyethylene (PE) was quantified and compared to solutes (Rhodamine WT dye) using energy losses, residence time distributions (RTDs), and mixing models within surcharging and overflowing manholes. The bulk mass of solute and PE concentrations followed similar flow paths across all conditions except for 17.3 ± 7.9 % of PE mass that was immobilized in a dead zone above the inlet pipe for manholes with a surcharge to pipe diameter ratio ≥2. Consequently, these microplastics only exit after a significant change in hydraulic regime occurs, causing microplastics to be at risk of being contaminated over a prolonged duration. No significant mixing differences for PE and solutes were found between manhole geometries. The deconvolution method outperformed the ADZ model with goodness of fit (Rt2) values of 0.99 (0.60) and 1.00 (0.89) for PE and solute mixing, respectively. This establishes the deconvolution method as the most accurate and appropriate model to accurately predict microplastic mixing in manholes and urban drainage systems.

Microplastic contamination in commercial fish feeds: A major concern for sustainable aquaculture from a developing country

Plastic pollution has become a global issue nowadays. Due to the increased population in developing countries, we largely depend on fish from our aquaculture industry to meet the required protein demand. Though several studies documented plastic ingestion in freshwater and marine organisms, very limited studies have been conducted to elucidate microplastic (MP) contamination in commercial fish feed. Therefore, this study was designed to identify, quantify, and characterize microplastics (MPs) in commercial fish feeds in Bangladesh and assess possible health risks in fish consuming different commercial fish feeds. All fish feed samples were 100 % contaminated with MPs, where the mean abundance of MPs ranged between 500 and 2200 MPs/kg. No significant differences among different types of feeds (e.g., starter, grower, and finisher) were observed in terms of MPs abundance (F = 0.999, p = 0.385). This study revealed that fiber was the most dominant shape of MPs (90 %), while the most dominant color of MPs was red (34 %), followed by black (31 %) and blue (19 %). The 100-1500 µm size class covers 88 % of the total MPs in the collected fish feed samples. Identified polymers in the samples were polyethylene (PE, 37.71 %), polyvinyl chloride (PVC, 27.14 %), polypropylene (PP, 22.08 %), and polyethylene terephthalate (PET, 13.07 %), respectively, where PE and PVC fall under the risk category IV to V. The Pollution load index (PLI) values of all fish feed samples were <10, indicating the risk category of I (low risk). Therefore, this study highly recommended avoiding plastic materials in the packaging and storing purposes of feed ingredients in the feed mills to ensure contamination-free fish feed for sustainable aquaculture.

Polyethylene Microplastics Affected Survival Rate, Food Intake and Altered Oxidative Stress Parameters in Freshwater Snail Indoplanorbis exustus

Microplastics have a negative impact on aquatic ecosystems. Gastropod mollusks serve as bioindicators and are good model systems for ecotoxicological studies. To assess oxidative damage, we exposed the ram's horn snail, Indoplanorbis exustus, to various concentrations of low-density polyethylene microplastics (size range 8-100 µm). The main objectives were microplastics preparation, characterization, and examination of their effect on the essential organs of I. exustus. Scanning electron microscopy, fourier transform infrared spectroscopy and x-ray diffraction techniques confirmed the polymer type of laboratory prepared polyethylene microplastics. The LC50 value of microplastics for snails was calculated to be 872 mg/L after 96 h of exposure. We observed a significant elevation in superoxide dismutase, catalase and lipid peroxidation levels with increasing concentrations of microplastics. Microplastics exposure also affected protein content, total food intake and total weights. Moreover, snails failed to recover post-treatment. Snails collected from contaminated source of microplastics served as positive control for the study. Hence, we can conclude that microplastics cause overall impairment in the physiological parameters and show adverse effects on the freshwater snail, I. exustus.