Optimization and validation of a micro-QuEChERS method for phthalates detection in small samples of cetacean blubber

In this study, an innovative method was developed to detect and quantify phthalates in fresh cetacean blubber. An adaptation of the ammonium formate QuEChERS method was used and adapted as a micro-extraction for small quantities of samples. Significantly, this technique utilized minimal quantities of reagents and salts, with the additional implementation of rigorous Quality Assurance/Quality Control protocols to further reduce background contamination. To ensure the reliability of this method, comprehensive validation procedures were conducted, with a specific focus on two widely studied cetacean species: the common bottlenose dolphin (Tursiops truncatus) and the short-finned pilot whale (Globicephala macrorhynchus). Determination coefficients (R2) for matrix-matched calibration were >0.93 with limits of quantifications (LOQ) of the method in the range of 5-10 ng/g. Mean recovery values were between 40 and 100 %. This novel methodology holds particular relevance for environmental research studies, offering the capability to detect emerging contaminants with minimal sample requirements. This aspect is particularly valuable in investigations that involve free-ranging animals and rely on biopsy sampling. It allows for the assessment of contaminant levels in healthy individuals within wild populations, enhancing our understanding of ecological impacts and potential conservation measures.•A micro-extraction adaptation of the ammonium formate QuEChERS method was developed and applied to a small quantity of fresh cetacean blubber to detect phthalates.•Small quantities of reagents and salts were used, and additional Quality Assurance/ Quality Control procedures were taken to further minimize background contamination.•Method validation was carried out for two cosmopolitan and extensively studied cetacean species: the common bottlenose dolphin (Tursiops truncatus) and the short-finned pilot whale (Globicephala macrorhynchus).

A green approach for the automatic quantitative analysis of additives in plastic samples using in-tube extraction dynamic headspace sampling technique coupled to GC-MS/MS

BACKGROUND

Many of the chemicals frequently used as additives have been recognised as hazardous substances, and therefore their analysis is necessary to evaluate plastic contamination risk. Additives analysis in plastic samples is usually performed by methods involving high volumes of toxic solvents or having high detection limits. In this work, a novel, fast, solventless and reliable green method was developed for the automated analysis of plastic additives from plastic samples. The proposed method consists of in-tube extraction dynamic headspace sampling (ITEX-DHS) combined with gas chromatography (GC) and mass spectrometry (MS/MS) determination.

RESULTS

Several parameters affecting the ITEX-DHS extraction of 47 additives in plastic samples (including phthalates, bisphenols, adipates, citrates, benzophenones, organophosphorus compounds, among others) were optimised. The use of matrix-matched calibration, together with labelled surrogate standards, minimises matrix effects, resulting in recoveries between 70 and 128%, with good quantitation limits (below 0.1 μg g-1 for most compounds) and precision (<20%). The method proposed can be applied to any type of polymer, but due to the existence of the matrix effect, calibrates with the adequate matrix should be performed for each polymer.

SIGNIFICANCE

This method represents an effective improvement compared to previous methods because it is fast, solvent-free, fully automated, and provides reliable quantification of additives in plastic samples.

Blueprint for the design, construction, and validation of a plastic and phthalate-minimised laboratory

Micro and nanosized plastics (MNPs), and a range of associated additive chemicals, have become pervasive contaminants that humans and the environment are exposed to everyday. However, one of the principal challenges in their analysis is adequate strategies to minimise background contamination. Here a blueprint for a specialised plastics and additive-minimised clean room laboratory built for this purpose is presented. Common laboratory construction materials (n = 23) were tested, including acoustic baffles, ceiling materials, floor materials, glazing rubber, and silicone sealant. The % polymer content ranged from 2-76% w/w while the sum concentration of six phthalates ranged from 0.81 (0.73-0.86) to 21000 (15000-27000) mg/kg, assigning many of these materials as inappropriate for use in a clean room environment. The final design of the laboratory consisted of three interconnected rooms, operated under positive pressure with the inner rooms constructed almost entirely of stainless steel. Background concentrations of MNPs and phthalates in the new laboratory were compared to two Physical Containment Level 2 (PC2) laboratory environments, with concentrations of MNPs reduced by > 100 times and phthalates reduced by up to 120 times. This study reports the first known clean room of its kind and provides a blueprint for reference and use by future plastics research.

Occurrence and abundance of microplastics and plasticizers in landfill leachate from open dumpsites in Sri Lanka

This is the first attempt that investigate the abundance of plasticizers in leachate sediment in the scientific literature, alongside the debut effort to explore the abundance of microplastics and plasticizers in landfill leachate and sediment in Sri Lanka. Microplastics in sizes ranging from ≥2.0-5.0, ≥1.0-2.0, and ≥ 0.5-1.0 mm were extracted from the leachate draining from ten municipal solid waste open dump sites and sediment samples covering seven districts. Microplastics were extracted by density separation (Saturated ZnCl2) followed by wet peroxide digestion and the chemical identification was conducted by Fourier Transform Infrared spectroscopy. Plasticizers were extracted to hexane and analyzed by high-performance liquid chromatography. The total mean microplastic abundance in leachate was 2.06 ± 0.62 mg/L whereas it was 363 ± 111 mg/kg for leachate sediments. The most frequently found polymer type was polyethylene (>50%), and white color was dominant. The average concentration of bisphenol A (BPA), benzophenone (BP) and diethyl-hydrogen phthalate (DHEP) in leachate was 158 ± 84.4, 0.75 ± 0.16 and 170 ± 85.8 μg/L respectively. Furthermore, BP and DHEP in leachate sediment was 100 ± 68.3 and 1034 ± 455 μg/kg respectively. As landfill leachate is directly discharged into nearby surface and groundwater bodies that serve as sources of drinking water, the study highlights the potential concerns of microplastic and plasticizer exposure to the surrounding Sri Lankan community through consumption of contaminated drinking water. Therefore, there is a timely need of develop the effective waste management and pollution control measures to minimize the possible threats to both the environment and human health.

Protective role of fetal bovine serum on PLHC-1 spheroids exposed to a mixture of plastic additives: A lipidomic perspective

The use of fetal bovine serum (FBS) in cell culture is being questioned for scientific and ethical reasons, prompting the exploration of alternative approaches. Nevertheless, the influence of FBS on cell functioning, especially in fish cells, has not been comprehensively examined. This study aims to evaluate the impact of FBS on the lipidome of PLHC-1 spheroids and investigate cellular and molecular responses to plastic additives in the presence/absence of FBS. Lipidomic analyses were conducted on PLHC-1 cell spheroids using liquid chromatography coupled with a high-resolution quadrupole time-of-flight mass spectrometer (HRMS-QToF). The removal of FBS from the culture medium for 24 h significantly changed the lipid profile of spheroids, resulting in a depletion of cholesterol esters (CEs), phosphatidylcholines (PCs) and lyso-phosphatidylcholines (LPCs), while ceramides and certain glycerophospholipids slightly increased. Additionally, the exclusion of FBS from the medium led to increased cytotoxicity caused by a mixture of plastic additives and increased lipidomic alterations, including an elevation of ceramides. This study emphasizes the protective role of serum components in fish liver spheroids against a mixture of plastic additives and underscores the importance of considering exposure conditions when studying metabolomic and lipidomic responses to toxicants.

The effects of plastic additives on swimming activity and startle response in marine amphipod Echinogammarus marinus

Plastic additives are widely used in plastic production and are found in the environment owing to their widespread applications. Among these additives, N-butyl benzenesulfonamide (NBBS) and triphenyl phosphate (TPHP) are under international watchlist for evaluation, with limited studies on amphipods. Di-ethylhexyl phthalate (DEHP) and dibutyl phthalate (DBP) are banned in some countries and categorised as substances of very high concern. This study aimed to investigate the effects of NBBS, TPHP, DEHP and DBP on the swimming activity of a coastal intertidal marine amphipod, Echinogammarus marinus. Furthermore, this study is the first to quantify startle response in E. marinus in response to light stimuli. Amphipods were exposed to 0, 0.5, 5, 50 and 500 μg/l concentrations of all test compounds. Swimming activity and startle responses were assessed by video tracking and analysis using an 8-min alternating dark and light protocol after exposure on days 7 and 14. We observed an overall compound and light effect on the swimming activity of E. marinus. A significant decrease in swimming distance was found in 500 μg/l NBBS and TPHP. We observed that the startle response in E. marinus had a latency period of >2 s and animals were assessed at 1 s and the sum of the first 5 s. There was a clear startle response in E. marinus during dark to light transition, evident with increased swimming distance. NBBS exposure significantly increased startle response at environmental concentrations, while significant effects were only seen in 500 μg/l TPHP at 5 s. We found no significant effects of DEHP and DBP on swimming behaviour at the concentrations assessed. The findings of this study affirm the necessity for a continuous review of plastic additives to combat adverse behavioural effects that may be transferable to the population levels.

Various additive release from microplastics and their toxicity in aquatic environments

Additives may be present in amounts higher than 50% within plastic objects. Additives in plastics can be gradually released from microplastics (MPs) into the aquatic environment during their aging and fragmentation because most of them do not chemically react with the polymers. Some are known to be hazardous substances, which can cause toxicity effects on organisms and pose ecological risks. In this paper, the application of functional additives in MPs and their leaching in the environment are first summarized followed by their release mechanisms including photooxidation, chemical oxidation, biochemical degradation, and physical abrasion. Important factors affecting the additive release from MPs are also reviewed. Generally, smaller particle size, light irradiation, high temperature, dissolved organic matter (DOM) existence and alkaline conditions can promote the release of chemicals from MPs. In addition, the release of additives is also influenced by the polymer's structure, electrolyte types, as well as salinity. These additives may transfer into the organisms after ingestion and disrupt various biological processes, leading to developmental malformations and toxicity in offspring. Nonetheless, challenges on the toxicity of chemicals in MPs remain hindering the risk assessment on human health from MPs in the environment. Future research is suggested to strengthen research on the leaching experiment in the actual environment, develop more techniques and analysis methods to identify leaching products, and evaluate the toxicity effects of additives from MPs based on more model organisms. The work gives a comprehensive overview of current process for MP additive release in natural waters, summarizes their toxicity effects on organisms, and provides recommendations for future research.

Leachates of weathering plastics from an urban sandy beach: Toxicity to sea urchin fertilization and early development

Plastic leachates have chemical and biological implications for marine environments. This study experimentally evaluated acute effects of weathering plastic leachates (0, 25, 50, 75 and 100 %) on fertilization and early development of the sea urchin Lytechinus variegatus. Fertilization, embryonic and larval development were drastically inhibited (~75 %) when gametes were exposed to intermediate and high leachate concentrations or delayed when exposed to the lowest concentration. Fertilization and first cleavage stages were highly affected by exposure to intermediate and high leachate concentrations. None of the cells incubated at concentrations from 50 % reached blastula stage, suggesting that embryonic development was the most sensitive stage. Abnormalities in embryos and larvae were observed in all leachate treatments. Chemical analysis detected high concentration of bisphenol A, which may induce these observed effects. Our results highlight the potential threats of plastic pollution to sea urchin populations, which may severely affect the structure and functioning of coastal ecosystems.

Evaluation of precopulatory pairing behaviour and male fertility in a marine amphipod exposed to plastic additives

Plastics contain a mixture of chemical additives that can leach into the environment and potentially cause harmful effects on reproduction and the endocrine system. Two of these chemicals, N-butyl benzenesulfonamide (NBBS) and triphenyl phosphate (TPHP), are among the top 30 organic chemicals detected in surface and groundwater and are currently placed on international watchlist for evaluation. Although bans have been placed on legacy pollutants such as diethylhexyl phthalate (DEHP) and dibutyl phthalate (DBP), their persistence remains a concern. This study aimed to examine the impact of plastic additives, including NBBS, TPHP, DBP, and DEHP, on the reproductive behaviour and male fertility of the marine amphipod Echinogammarus marinus. Twenty precopulatory pairs of E. marinus were exposed to varying concentrations of the four test chemicals to assess their pairing behaviour. A high-throughput methodology was developed and optimised to record the contact time and re-pair time within 15 min and additional point observations for 96 h. The study found that low levels of NBBS, TPHP, and DEHP prolonged the contact and re-pairing time of amphipods and the proportion of pairs reduced drastically with re-pairing success ranging from 75% to 100% in the control group and 0%-85% in the exposed groups at 96 h. Sperm count declined by 40% and 60% in the 50 μg/l and 500 μg/l DBP groups, respectively, whereas TPHP resulted in significantly lower sperms in 50 μg/l exposed group. Animals exposed to NBBS and DEHP showed high interindividual variability in all exposed groups. Overall, this study provides evidence that plastic additives can disrupt the reproductive mechanisms and sperm counts of amphipods at environmentally relevant concentrations. Our research also demonstrated the usefulness of the precopulatory pairing mechanism as a sensitive endpoint in ecotoxicity assessments to proactively mitigate population-level effects in the aquatic environment.

Immunotoxic, genotoxic, and endocrine disrupting impacts of polyamide microplastic particles and chemicals

Due to their exceptional properties and cost effectiveness, polyamides or nylons have emerged as widely used materials, revolutionizing diverse industries, including industrial 3D printing or additive manufacturing (AM). Powder-based AM technologies employ tonnes of polyamide microplastics to produce complex components every year. However, the lack of comprehensive toxicity assessment of particulate polyamides and polyamide-associated chemicals, especially in the light of the global microplastics crisis, calls for urgent action. This study investigated the physicochemical properties of polyamide-12 microplastics used in AM, and assessed a number of toxicity endpoints focusing on inflammation, immunometabolism, genotoxicity, aryl hydrocarbon receptor (AhR) activation, endocrine disruption, and cell morphology. Specifically, microplastics examination by means of field emission scanning electron microscopy revealed that work flow reuse of material created a fraction of smaller particles with an average size of 1-5 µm, a size range readily available for uptake by human cells. Moreover, chemical analysis by means of gas chromatography high-resolution mass spectrometry detected several polyamide-associated chemicals including starting material, plasticizer, thermal stabilizer/antioxidant, and migrating slip additive. Even if polyamide particles and chemicals did not induce an acute inflammatory response, repeated and prolonged exposure of human primary macrophages disclosed a steady increase in the levels of proinflammatory chemokine Interleukin-8 (IL-8/CXCL-8). Moreover, targeted metabolomics disclosed that polyamide particles modulated the kynurenine pathway and some of its key metabolites. The p53-responsive luciferase reporter gene assay showed that particles per se were able to activate p53, being indicative of a genotoxic stress. Polyamide-associated chemicals triggered moderate activation of AhR and elicited anti-androgenic activity. Finally, a high-throughput and non-targeted morphological profiling by Cell Painting assay outlined major sites of bioactivity of polyamide-associated chemicals and indicated putative mechanisms of toxicity in the cells. These findings reveal that the increasing use of polyamide microplastics may pose a potential health risk for the exposed individuals, and it merits more attention.

Identifying biomarkers of pollutant exposure in ocean sentinels: Characterisation and optimisation of B-esterases in plasma from loggerhead turtles undergoing rehabilitation

Sea turtles are frequently proposed as indicator species for assessing ocean health. To faciliate the use of these species as bioindicators requires the development of tools for rapidly and effectively assessing individual health. Here, we collected 104 blood samples from 69 loggerhead sea turtles, Caretta caretta, undergoing rehabilitation to determine the connection between health status, the activity of B-esterases, and other biochemical parameters. To determine the optimal assay protocol for B-esterases, we measured the activity and kinetics of cholinesterases-(ChEs) and carboxylesterases (CEs) using 3 and 5 commercial substrates, respectively, at different assay conditions. IC50 values for the activity of B-esterases were calculated within a concentration range for model pesticide inhibitors. Turtles' health status was determined via routine veterinary procedures. During rehabilitation (which was associated with improving health status), we observed a decrease in the activity of most enzymes (especially in acetylcholinesterase) alongside an increase in CE when using p-nitrophenyl acetate as a substrate. As such, it is possible that the activity rates of plasmatic B-esterases could serve as an indicator of health status. There is also high potential that B-esterases could be specifically sensitive to marine pollutants although to further validate this would require future studies to specifically correlate B-esterarse activities to pollutant concentrations in blood or excreta.

Spatial and temporal patterns of organophosphate Esters flame retardants and plasticizers in airborne particles over the Mediterranean sea

We studied the co-occurrence of OPEs and other constituents in atmospheric particles at the two edges of the Mediterranean Sea, under the influence of the transport of polluted air from Europe and dust from the Sahara. The highest OPE concentrations were observed during the summer period in the East Mediterranean and in spring for the NW Mediterranean. The total average atmospheric concentration of Σ6OPEs in the NW Mediterranean was 2103 ± 2020 pg m-3 (n = 23) with EHDPP and TCPP to be the predominant OPEs, accounting on average for 46% and 37% of the total Ʃ6OPEs concentrations, respectively. The average concentration of Σ6OPEs in East Mediterranean was 156.4 ± 170.3 pg m-3 (n = 67) with TCPP showing the highest concentration (116.1 ± 92.8 pg m-3), followed by TCEP (67.5 ± 55.8 pg m-3). In both areas, OPEs were mostly associated with fossil fuel combustion and road traffic, while the air masses from Saharan desert influenced the concentration of EHDPP, TCEP in NW Mediterranean and the TCEP concentration levels in the East Mediterranean. The total annual deposition of reported OPEs to the Mediterranean basin was estimated to be 584 tonnes, accounting for about 8.5% of the total deposited anthropogenic phosphorus.

Adverse effects of plastic leachate and its component 2,4-DTBP on the early development of zebrafish embryos

Plastic waste has become a global environmental problem threatening the health of aquatic organisms especially via leachate. In this study, the test of zebrafish embryo showed adverse effects of leachate from some agricultural mulching films after UV light aging for 60 h. A typical phenolic antioxidant 2,4-di-tert-butylphenol (2,4-DTBP) was detected in the leachate and tested further for the zebrafish embryo biotoxicity. The microplastic leachate (6, 8 g/L, mass concentration measured by weight of plastic) increased the death and malformation rates, and reduced the hatching rate, heart rate, and body length of zebrafish larvae in the 96-hour early development period. Similar adverse effects were also caused by the 2,4-DTBP (0.01, 0.1, 1.0 mg/L, corresponding to 0.049, 0.49, and 4.85 μM) to some degree but could not completely explain the significant influences caused by the plastic leachate. Transcriptome analysis of zebrafish embryos exposed to the 2,4-DTBP for 96 h showed that the protein, fat, and carbohydrate digestion and absorption pathways, pancreatic secretion, PPAR signaling pathway, tryptophan metabolism, and adipocytokine signaling pathway were considerably down-regulated, but the cholesterol metabolism pathway was up-regulated in larval zebrafish. The altered transcriptional expression of mRNA at early development stage (96 h post fertilization) of zebrafish suggested that the 2,4-DTBP caused reduction of digestive capacity and pancreatic secretory function, and adversely affected processes associated with energy metabolism and glycolipid metabolism of larval zebrafish. This study helps us further understanding the effects of plastic leachate on the early development of fishes.

Exposure to micro(nano)plastics polymers in water stored in single-use plastic bottles

Human exposure to micro (nano)plastics (MNPLs) has become a significant concern as a potential health threat. Exposure routes include ingestion, inhalation, and dermal contact, being food and drinking water the primary sources of oral exposure. Here we present the quantification of polymers of MNPLs particles from 700 nm to 20 μm in bottled water commercialised in Spain, including an estimation of the potential risk for daily consumers. We evaluated samples from 20 popular brands in 0.5 and 1.5 L plastic bottles. A double-suspect screening approach developed and validated in our research group for drinking water was adapted for bottled water samples. The identification and quantification of MNPLs-polymers in mass units and the tentative identification of plastic additives (PA) until the second level of confidence was carried out based on high-performance liquid chromatography coupled to high-resolution mass spectrometry (HPLC-HRMS). The results showed the presence of polypropylene (PP), polyethylene (PE) and polypropylene terephthalate (PET) in the samples. Among them, PE was the most frequently detected and quantified polymer (55% of samples) followed by PET which was detected in 33% of the samples and showing the highest concentration (4700 ng L-1). The median value of the sum of polymer concentrations was 359 ng L-1. In addition, 28 plastic additives were detected, where at least one of them was present in 100% of the samples. Stabilizers and plasticisers were the most frequently identified. A prioritisation study was performed using a multi-QSAR modelling software, where bis(2-ethylhexyl) adipate and bis(2-ethylhexyl) phthalate were estimated as the most potentially harmful compounds for human health. Overall, findings suggest that bottled water is a non-negligible route to exposure to MNPLs.

A dataset of organic pollutants identified and quantified in recycled polyethylene pellets

Plastics are produced with a staggering array of chemical compounds, with many being known to possess hazardous properties, and others lacking comprehensive hazard data. Furthermore, non-intentionally added substances can contaminate plastics at various stages of their lifecycle, resulting in recycled materials containing an unknown number of chemical compounds at unknown concentrations. While some national and regional regulations exist for permissible concentrations of hazardous chemicals in specific plastic products, less than 1 % of plastics chemicals are subject to international regulation [1]. There are currently no policies mandating transparent reporting of chemicals throughout the plastics value chain or comprehensive monitoring of chemicals in recycled materials. The dataset presented here provides the chemical analysis of 28 samples of recycled High-Density Polyethylene (HDPE) pellets obtained from various regions of the Global South, along with a reference sample of virgin HDPE. The analysis comprises both Target and Non-Targeted Screening approaches, employing Liquid Chromatography-High-Resolution Mass Spectrometry (LC-HRMS) and Gas Chromatography-High-Resolution Mass Spectrometry (GC-HRMS). In total, 491 organic compounds were detected and quantified, with an additional 170 compounds tentatively annotated. These compounds span various classes, including pesticides, pharmaceuticals, industrial chemicals, plastic additives. The results highlight the prevalence of certain chemicals, such as N-ethyl-o-Toluesulfonamide, commonly used in HDPE processing, found in high concentrations. The paper provides a dataset advancing knowledge of the complex chemical composition associated with recycled plastics.

Development of a generic approach for monitoring leachable compounds in hospital pharmacy-prepared prefilled plastic packaging by ultrahigh-performance liquid chromatography coupled to high-resolution mass spectrometry with postcolumn infusion

Prefilled plastic packaging is time- and cost-effective in hospital pharmacy because it prevents waste, preparation errors, dosage errors, microbial contamination and accidents. This packaging mostly includes prefilled syringes (PFS), intravenous (IV) bags and vials intended for long-term storage that can be used for immediate treatment. There is a rising availability in the market for prefilled drug products due to their practical approach. Leachable compounds could be evaluated in hospital pharmacy-prepared prefilled drug solutions. The Pharmacy Department at the Lausanne University Hospital has developed an innovative, highly sensitive, and generic method by postcolumn infusion based on ultrahigh-performance liquid chromatography coupled to high-resolution mass spectrometry (LC-HRMS) for the analysis of plastic additives in hospital pharmacies. The postcolumn infusion solution was developed with 2% ammonium hydroxide in methanol on a representative set of 30 candidate compounds with different physical-chemical properties, such as log P and molecular structure, to represent the most important categories of additives. The LODs obtained for all compounds ranged from 0.03 to 7.91 ng/mL with linearity up to 250 ng/mL. Through this screening method, plastic additives can be rapidly identified due to the combined use of retention time, exact mass (including isotopic pattern) and MS/MS spectra. In addition, the users can screen for vast categories of plastic additives, including plasticizers, epoxy monomers, antioxidants, UV stabilizers, and others. The screening is facilitated by assessments of a complex in-house-built database for extractable and leachable trace assessment (DELTA), containing 205 compounds for unambiguous identification. Relative response factors were established for all analytes to obtain a semiquantitation of compounds. Moreover, the database also contains valuable estimative toxicology information, which was obtained through calculating their permissible dose exposure threshold; thus, estimative toxicology assessment can be performed for identified compounds in prefilled drug products. This method and the database were applied to a hospital pharmacy-prepared prefilled vancomycin syringe for paediatric use. Ultrasound-assisted dispersive liquid-liquid microextraction (UA-DLLME) was used to prepare the samples for leachable analysis. As a result, 17 plastic additives were formally identified, and their concentrations were estimated. A toxicology assessment was performed by comparing their concentrations with their theoretical PDE thresholds. In conclusion, the prefilled drug solution released a negligible amount of known leachables that appeared to be safe for use in neonates and children.

Contribution of free hydroxyl radical to the formation of micro(nano)plastics and release of additives during polyethylene degradation in water

The omnipresence of secondary microplastics (MPs) in aquatic ecosystems has become an increasingly alarming public health concern. Hydrogen peroxide (H2O2) is an important oxidant in nature and the most stable reactive oxygen species occurred in natural water. In order to explore the contribution of free ˙OH generated from H2O2-driven Fenton-like reactions on the degradation of polyethylene (PE) and generation of micro- and nano-scale plastics in water, a batch experiment was conducted over a period of 620 days in water treated with micromolar H2O2. The incorporation of H2O2 in water induced the formation of flake-like micro(nano)-sized particles due to intensified oxidative degradation of PE films. The presence of ˙OH significantly enhanced the generation of both micro- and nano-scale plastics exhibiting a higher proportion of particles in the range of 200-500 nm compared to the Control. Total organic carbon in the H2O2 treated solution was nearly 174-fold higher than that of the Control indicating a substantial liberation of organic compounds due to the oxidative degradation of native carbon chain of PE and subsequent decomposition of its additives. The highly toxic butylated hydroxytoluene detected from the gas chromatography-mass spectrometry (GC-MS) analysis implied the toxicological behavior of secondary micro(nano)plastics influenced by the oxidation and decomposition processes The findings from this study further expand our understanding of the role of ˙OH in degrading PE micro-scale plastics into nanoparticles as an implication of naturally occurring H2O2 in aquatic environments. In the future, further attention should be drawn to the underlying mechanisms of H2O2-driven in-situ Fenton reaction mediated by natural environmental conditions targeting the alternation of light and darkness on the oxidative degradation of plastics.

Role of soil organic matter on the retention and mobility of common plastic additives, Di(2-ethylhexyl) phthalate, bisphenol A and benzophenone, in soil

The objectives of this study were to assess the role of soil organic matter on retaining plastic additives, Di(2-ethylhexyl) phthalate (DEHP), Bisphenol A (BPA) and Benzophenone (BP), to postulate the retention mechanisms and mobility in soil. Batch experiments were conducted for red yellow podzolic soil (OM) and soil subjected to high temperature oxidation at 600 °C for 2 h to remove total organic matter (OMR). Pristine soil, which contains organic matter abbreviated as OM (soil with organic matter) whereas total organic matter removed soil is abbreviated as OMR (organic matter removed soil). The pH edge and kinetic experiments were conducted with 20 g/L soil suspension spiked with 10 mg/L of each additive, whereas 1-20 mg/L concentration range was used in isotherm experiments and analyzed using high performance liquid chromatography. DEHP demonstrated the highest retention, 331 and 615.16 mg/kg in OM and OMR soils respectively, at pH 6.6. However, BPA and BP showed highest retentions of 132 and 128 mg/kg, respectively around pH 4.3 in pristine soil. DEHP interaction with soil OM indicated weak physical bonding whereas chemisorption to OMR soil. In the case of BPA, physisorption governed its interaction with both soil organic matter and mineral fraction. Nevertheless, BP demonstrated chemical interactions with OM and minerals. Desorption of DEHP was close to 100% however, BPA and BP were <15%. Overall, DEHP and BPA could be easily released into soil water and possibly be available for plant uptake while, BP is immobilized in soil.

Bisphenols and phthalates in Australian wastewater: A statistical approach for estimating contributions from diffuse and point sources

Chemicals associated with plastics, such as bisphenols and phthalates, enter sewerage from both diffuse (domestic/commercial) and point (industrial) sources. In this study, we aimed to devise a conservative, statistical baseline to estimate contributions from these source types when sampling of specific sources is not possible. Population-normalised mass loads of two bisphenols and nine phthalates were estimated in wastewater samples from 22 sewage treatment plants (STPs) in 2019. Two multiday (10 and 7 day) pools were created for each STP. Baseline (diffuse) release thresholds were set at the mean of the first quartile (Q1) plus 10 times the standard deviation (STDV) of this quartile [Q1 mean + (10 x STDV)], with contributions over this considered to come from point sources. Chemicals with at least one population-normalised mass load more than three times their baseline were classified as point-source dominant and the remaining as diffuse-source dominant. Eleven of the twelve chemicals examined were detected above limits of quantification in all wastewater samples. Bisphenol A (BPA), bisphenol S (BPS), di-isononyl phthalate (DiNP) and di-methyl phthalate (DMP) were classified as point-source dominant chemicals. The total annual mass loads entering STPs across Australia were estimated to be 4.2 tonnes/year from diffuse sources and 4.5 tonnes/year from point sources for bisphenols, and 47 tonnes/year from diffuse sources and 5.9 tonnes/year from point sources for phthalates.

The unusual suspects: Screening for persistent, mobile, and toxic plastic additives in plastic leachates

Plastic additives are a diverse group of chemical compounds added to plastic products to give them their unique physical-chemical properties. Persistent, mobile, and toxic (PMT) plastic additives are a highly polar, environmentally stable sub-group of plastic additives with a variety of uses in plastic products. Due to their mobility into water, they can pose a significant long-term risk to the aquatic environment. Despite the potential threat, PMT plastic additives remain largely unregulated and under-studied. Notably, there is a need for dedicated analytical methodology and leaching studies to determine their potential emission from plastic products. Here we present an optimized leaching protocol and novel instrumental analysis method for the screening of 124 PMT plastic additives registered for use in Canada using high performance liquid chromatography with quantitative time-of-flight mass spectrometry (HPLC-QToF-MS). The analytical method covered a log Kow/Dow range between 0.21 and 6.02, which covered 72% of the PMT plastic additives used in Canada. A total of 52 PMT plastic additive suspects were leached in the optimization experiments, 44 of which were unique based on accurate mass and retention time. The conditions that resulted in the greatest numbers of PMT plastic additives leached were lake water, UV light exposure, and a timeframe of approximately 30 days. The analytical and leaching methods presented here offer new tools to study PMT plastic additives and assess their leaching in an environmentally relevant matrix, which can inform monitoring, threat assessment, and regulatory efforts moving forward.

Impact of accelerated weathering on the leaching kinetics of stabiliser additives from microplastics

The release of additives from microplastics is known to harm organisms. In the environment, microplastics are exposed to weathering processes which are suspected to influence additive leaching kinetics, the extent and mechanism of which remain poorly understood. We examined the impact of weathering on stabiliser additive leaching kinetics using environmentally relevant accelerated weathering and leaching procedures. Nine binary polymer-additive formulations were specifically prepared, weathered, analysed, and evaluated for their leaching characteristics. Cumulative additive release (Ce) varied widely between formulations, ranging from 0.009 to 1162 µg/g. Values of Ce generally increased by polymer type in the order polyethylene terephthalate < polyamide 6 < polyethylene. The change in leaching kinetics after accelerated weathering was incongruous across the nine formulations, with a significant change in Ce only observed for three out of nine formulations. Physicochemical characterisation of the microplastics demonstrated that additive blooming was the primary mechanism influencing the leaching response to weathering. These findings highlight the dependency of additive fate on the polymer type, additive chemistry, and the extent of weathering exposure. This has significant implications for risk assessment and mitigation, where the general assumption that polymer weathering increases additive leaching may be too simplistic.

Abnormality of mussel in the early developmental stages induced by graphene and triphenyl phosphate: In silico toxicogenomic data-mining, in vivo, and toxicity pathway-oriented approach

Increasing number of complex mixtures of organic pollutants in coastal area (especially for nanomaterials and micro/nanoplastics associated chemicals) threaten aquatic ecosystems and their joint hazards are complex and demanding tasks. Mussels are the most sensitive marine faunal groups in the world, and their early developmental stages (embryo and larvae) are particularly susceptible to environmental contaminants, which can distinguish the probable mechanisms of mixture-induced growth toxicity. In this study, the potential critical target and biological processes affected by graphene and triphenyl phosphate (TPP) were developed by mining public toxicogenomic data. And their combined toxic effects were verified by toxicological assay at early developmental stages in filter-feeding mussels (embryo and larvae). It showed that interactions among graphene/TPP with 111 genes (ABCB1, TP53, SOD, CAT, HSP, etc.) affected phenotypes along conceptual framework linking these chemicals to developmental abnormality endpoints. The PPAR signaling pathway, monocarboxylic acid metabolic process, regulation of lipid metabolic process, response to oxidative stress, and gonad development were noted as the key molecular pathways that contributed to the developmental abnormality. Enriched phenotype analysis revealed biological processes (cell proliferation, cell apoptosis, inflammatory response, response to oxidative stress, and lipid metabolism) affected by the investigated mixture. Combined, our results supported that adverse effects induced by contaminants/ mixture could not only be mediated by single receptor signaling or be predicted by the simple additive effect of contaminants. The results offer a framework for better comprehending the developmental toxicity of environmental contaminants in mussels and other invertebrate species, which have considerable potential for hazard assessment of coastal mixture.

Concentrations of bisphenols and phthalate esters in the muscle of Mediterranean striped dolphins (Stenella coeruleoalba)

Bisphenols (BPs) and phthalate esters (PAEs) are important compounds for the plastics industry, also called "everywhere chemicals" due to their ubiquity in daily use products. Both chemical groups are well-known environmental contaminants, whose presence has been reported in all environmental compartments, and whose effects, mainly associated to endocrine disruption, are detrimental to living organisms. Cetaceans, due to their long life-span, low reproduction rate and high position in the trophic web, are especially vulnerable to the effects of contaminants. However, little is known about BP and PAE concentrations in cetacean tissues, their potential relation to individual biological variables, or their trends over time. Here, the concentration of 10 BPs and 13 PAEs was assessed in the muscle of 30 striped dolphins (Stenella coeruleoalba) stranded along the Spanish Catalan coast (NW Mediterranean) between 1990 and 2018. Six BP and 6 PAE compounds were detected, of which only 4,4'-(cyclohexane-1,1-diyl)diphenol (BPZ) was detected in all the samples, at the highest concentration (mean 16.06 μg g-1 lipid weight). Sex or reproductive condition were largely uninfluential on concentrations: only dimethylphthalate (DMP) concentrations were significantly higher in immature individuals than in adults, and the overall PAE concentrations were significantly higher in males than in females. Temporal variations were only detected in bis(4-hydroxyphenyl)ethane (BPE), diethylphthalate (DEP) and dimethylphthalate (DMP), whose concentrations were lower, and 9,9-Bis(4-hydroxyphenyl)fluorene (BPFL), which were higher, respectively, in samples taken between 2014 and 2018, probably reflecting shifts in the production and use of these chemicals. These results provide the first assessment of concentrations of several BP and PAE compounds in the muscle of an odontocete cetacean.

Phthalates and their effects on human health: Focus on erythrocytes and the reproductive system

Plastics, long-chain artificial polymers, are used worldwide with a global production of 350 million tonnes per year. Various degradation processes transform plastics into smaller fragments divided into micro, meso and macroplastics. In various industries, such as construction, certain plastic additives are used to improve flexibility and enhance performance. Plastic additives include phthalates (PAE), dibutyl phthalate (DPB) and diethyl phthalate (DEP). Due to the use of plastics and plastic additives, these small fragments of different shapes and colours are present in all environmental compartments. For their characteristics, PAEs can be introduced particularly by ingestion, inhalation and dermal absorption. They can accumulate in the human body, where they have already been identified in blood, amniotic fluid and urine. The purpose of this review is to gather the effects that these plastic additives have on various systems in the human body. Being endocrine disruptors, the effects they have on erythrocytes and how they can be considered targets for xenobiotics have been analysed. The influence on the reproductive system was also examined. Phthalates are therefore often overused. Due to their properties, they can reach human tissues and have a negative impact on health. The aim of this review is to give an overview of the presence of phthalates and their hazards. Therefore, the use of these plastic additives should be reduced, replaced and their disposal improved.

Environmental occurrence and ecotoxicity of aquaculture-derived plastic leachates

Plastic products such as fishing nets and foam buoys have been widely used in aquaculture. To enhance the desirable characteristics of the final equipment, plastic gear for aquaculture is mixed with a wide range of additives. Recent studies have shown that additives could be leached out to the environment with a long-term use of aquaculture plastics, forming aquaculture-derived plastic leachates. It should be emphasized that some leachates such as phthalic acid esters (PAEs) and organophosphate esters (OPEs) are endocrine disruptors, which could increase the exposure risk of aquatic products and subsequently display potential threats to human health via food chain. However, systematic studies on the release, occurrence, bioaccumulation, and toxic effects of aquaculture-derived plastic leachates are missing, overlooking their potential sources and ecotoxicological risks in aquatic environments. We have reviewed and compared the concentrations of major plastic leachates in the water environment and organisms of global aquaculture and non-farmed areas, confirming that aquaculture leachate is an important source of contaminants in the environment. Moreover, the toxic effects of aquaculture-derived plastic additives and the related mechanisms are summarized with fish as a representative, revealing their potential health risk. In addition, we proposed current challenges and future research needs, which provides scientific guidance for the use and management of plastic products in aquaculture industries.

Monk seal faeces as a non-invasive technique to monitor the incidence of ingested microplastics and potential presence of plastic additives

Anthropogenic debris, including plastics, has recently been identified as a major threat for marine mammals and the Marine Strategy Framework Directive aims to achieve the good environmental status of European waters by addressing among other criteria, the effects of marine litter on biota. This study implemented for the first time a non-invasive technique for collecting monk seal samples to assess microdebris ingestion in combination with identifying plastic additives and porphyrins biomarkers. A total of 12 samples of monk seal faeces were collected from marine caves in Zakynthos Island, Greece. A total of 166 microplastic particles were identified; 75 % of the particles were smaller than 3 mm. Nine phthalates and three porphyrins were detected. A strong correlation was found between the number of microplastics and the concentration of phthalates. The values of both phthalates and porphyrins were found lower than in other marine mammal tissues, suggesting that seals might not be impacted by them yet.

Microplastic ingestion and plastic additive detection in pelagic squid and fish: Implications for bioindicators and plastic tracers in open oceanic food webs

The ubiquitous presence of microplastics (MPs) in the ocean represents a potential threat to marine organisms, with poorly understood long-term adverse effects, including exposure to plastic additives. The present study investigated the ingestion of MPs in two epipelagic fish species (Trachurus picturatus and Scomber colias) and three pelagic squid species (Loligo vulgaris, Ommastrephes caroli and Sthenoteuthis pteropus) from an open oceanic region of the Northeast Atlantic. Seven phthalate esters (PAEs) were also analysed in the organisms' tissue, and the potential correlation between PAEs concentrations and ingested MPs was investigated. Seventy-two fish and 20 squid specimens were collected and analysed. MPs were found in the digestive tract of all species and in the squid species' gills and ink sacs. The highest occurrence of MPs was in the stomach of S. colias (85 %) and the lowest in the stomach and ink sac of O. caroli and L. vulgaris (12 %). Most of the particles identified (>90 %) were fibres. Among all the ecological and biological factors considered (dietary preferences, season, body size, total weight, liver weight, hepatosomatic index and gastrosomatic index), only gastrosomatic index (GSI) and season were significant predictors of MPs ingestion in fish species, with a greater likelihood of ingestion in the cold season and in specimens with higher GSI values (i.e. higher feeding intensity). Four PAEs (DEP, DIBP, BBP, DEHP) were detected in all the species analysed, with average ∑PAEs concentrations ranging between 10.31 and 30.86 ng/g (wet weight). DIBP was positively correlated with ingested MPs, suggesting this compound might represent a "plastic tracer". This study highlights the problem of MPs ingestion for pelagic species in an open ocean region, highlighting the most suitable bioindicators and providing essential insights into the factors that may influence ingestion rates. Additionally, the detection of PAEs in all species indicates the need for further research on the contamination sources, the effects of these chemicals on marine organisms, and the potential risks to human health through seafood consumption.

Microplastics in aquatic environments: A comprehensive review of toxicity, removal, and remediation strategies

The occurrence of microplastics (MPs) in aquatic environments has been a global concern because they are toxic and persistent and may serve as a vector for many legacies and emerging pollutants. MPs are discharged to aquatic environments from different sources, especially from wastewater plants (WWPs), causing severe impacts on aquatic organisms. This study mainly aims to review the Toxicity of MPs along with plastic additives in aquatic organisms at various trophic compartments and available remediation methods/strategies for MPs in aquatic environments. Occurrences of oxidative stress, neurotoxicity, and alterations in enzyme activity, growth, and feeding performance were identical in fish due to MPs toxicity. On the other hand, growth inhibition and ROS formation were observed in most of the microalgae species. In zooplankton, potential impacts were acceleration of premature molting, growth retardation, mortality increase, feeding behaviour, lipid accumulation, and decreased reproduction activity. MPs togather with additive contaminants could also exert some toxicological impacts on polychaete, including neurotoxicity, destabilization of the cytoskeleton, reduced feeding rate, growth, survivability and burrowing ability, weight loss, and high rate of mRNA transcription. Among different chemical and biological treatments for MPs, high removal rates have been reported for coagulation and filtration (>86.5 %), electrocoagulation (>90 %), advanced oxidation process (AOPs) (30 % to 95 %), primary sedimentation/Grit chamber (16.5 % to 58.84 %), adsorption removal technique (>95 %), magnetic filtration (78 % to 93 %), oil film extraction (>95 %), and density separation (95 % to 100 %). However, desirable extraction methods are required for large-scale research in MPs removal from aquatic environments.

Organic chemicals associated with rubber are more toxic to marine algae and bacteria than those of thermoplastics

The current study investigated the chemical complexity of fifty plastic (36) and elastomer/rubber (14) methanol extracts from consumer products, focusing on the association with toxicity in two screening assays (bacteria luminescence and marine microalgae). The chemical composition varied considerably between the products and polymers. The most complex sample (car tire rubber) contained 2456 chemical features and the least complex (disposable water bottle) only 39 features, with a median of 386 features across all products. Individual extract toxicity also varied significantly across the products and polymers, with the two toxicity assays showing comparable results in terms of defining low and high toxicity extracts, and correlation between medium toxicity extracts. Chemical complexity and abundance both correlated with toxicity in both assays. However, there were strong differences in toxicity between plastic and elastomer extracts. Overall, 86-93 % of the 14 elastomer extracts and only 33-36 % of other polymer extracts (n = 36) were more toxic than the median. A range of compounds were tentatively identified across the sample set, with several concerning compounds being identified, mostly in the elastomers. While the current focus on plastic chemicals is towards thermoplastics, we show that elastomers may be of more concern from an environmental and human health perspective.

Interactions of human drug transporters with chemical additives present in plastics: Potential consequences for toxicokinetics and health

Human membrane drug transporters are recognized as major actors of pharmacokinetics; they also handle endogenous compounds, including hormones and metabolites. Chemical additives present in plastics interact with human drug transporters, which may have consequences for the toxicokinetics and toxicity of these widely-distributed environmental and/or dietary pollutants, to which humans are highly exposed. The present review summarizes key findings about this topic. In vitro assays have demonstrated that various plastic additives, including bisphenols, phthalates, brominated flame retardants, poly-alkyl phenols and per- and poly-fluoroalkyl substances, can inhibit the activities of solute carrier uptake transporters and/or ATP-binding cassette efflux pumps. Some are substrates for transporters or can regulate their expression. The relatively low human concentration of plastic additives from environmental or dietary exposure is a key parameter to consider to appreciate the in vivo relevance of plasticizer-transporter interactions and their consequences for human toxicokinetics and toxicity of plastic additives, although even low concentrations of pollutants (in the nM range) may have clinical effects. Existing data about interactions of plastic additives with drug transporters remain somewhat sparse and incomplete. A more systematic characterization of plasticizer-transporter relationships is needed. The potential effects of chemical additive mixtures towards transporter activities and the identification of transporter substrates among plasticizers, as well as their interactions with transporters of emerging relevance deserve particular attention. A better understanding of the human toxicokinetics of plastic additives may help to fully integrate the possible contribution of transporters to the absorption, distribution, metabolism and excretion of plastics-related chemicals, as well as to their deleterious effects towards human health.

Development of fish liver PLHC-1 spheroids and its applicability to investigate the toxicity of plastic additives

Fish liver cell lines are valuable tools to understand the toxicity of chemicals in aquatic vertebrates. While conventional 2D cell cultures grown in monolayers are well established, they fail to emulate toxic gradients and cellular functions as in in-vivo conditions. To overcome these limitations, this work focuses on the development of Poeciliopsis lucida (PLHC-1) spheroids as a testing platform to evaluate the toxicity of a mixture of plastic additives. The growth of spheroids was monitored over a period of 30 days, and spheroids 2-8 days old and sized between 150 and 250 µm were considered optimal for conducting toxicity tests due to their excellent viability and metabolic activity. Eight-day-old spheroids were selected for lipidomic characterization. Compared to 2D-cells, the lipidome of spheroids was relatively enriched in highly unsaturated phosphatidylcholines (PCs), sphingosines (SPBs), sphingomyelins (SMs) and cholesterol esters (CEs). When exposed to a mixture of plastic additives, spheroids were less responsive in terms of decreased cell viability and generation of reactive oxygen species (ROS), but were more sensitive than cells growing in monolayers for lipidomic responses. The lipid profile of 3D-spheroids was similar to a liver-like phenotype and it was strongly modulated by exposure to plastic additives. The development of PLHC-1 spheroids represents an important step towards the application of more realistic in-vitro methods in aquatic toxicity studies.

The influence of ecological factors in the modulation of pollution biomarkers of two small pelagic marine fish

Biomarkers are useful tools for the detection of marine pollution, which is poorly monitored in the pelagic environment. In this study, we investigated the role of key biological and environmental factors on three hepatic xenobiotic biomarkers: carboxylesterases (CEs), glutathione S-transferase (GST) and catalase (CAT). Additionally, ethoxyresorufin-O-deethylase (EROD) and benzyloxy-4-[trifluoromethyl]-coumarin-O-debenzyloxylase (BFCOD) activities were determined for comparative purposes. The pelagic species targeted were the European anchovy (Engraulis encrasicolus) and the European sardine (Sardina pilchardus). The results revealed sex-dependent CE activities in sardine. CEs and GST activities were significantly affected by reproduction and, in anchovy, CE activities were also influenced by temperature. In vitro incubations revealed that the pesticide dichlorvos caused up to 90 % inhibition of basal CEs activity. This work highlights that the reproductive status, temperature and sex, modulate biomarker responses, and that anchovy would be more suitable pelagic bioindicator due to its higher in vitro sensitivity to dichlorvos and sex-independent biomarker responses.

Bioplastic leachates characterization and impacts on early larval stages and adult mussel cellular, biochemical and physiological responses

Bioplastics are promoted as safer alternatives to tackle the long-term persistence of conventional plastics. However, information on the potential release of additives and non-intentionally added substances (NIAS) in the surrounding environment is limited, and biological effects of the leachates have been little studied. Leachates produced from three bioplastics, i.e. compostable bags (CB), bio-polyethylene terephthalate bottles (bioPET) and polylactic acid cups (PLA), and a control polymeric material, i.e. rubber tire (TR), were examined. The chemical nature of bioplastic polyesters PET, PLA and poly (butylene adipate-co-terephthalate) (PBAT) in CB, was confirmed by analytical pyrolysis. Fragments were incubated in artificial sea water for 14 days at 20 °C in darkness and leachate contents examined by GC-MS and HPLC-MS/MS. Catalysts and stabilizers represented the majority of chemicals in TR, while NIAS (e.g. 1,6-dioxacyclododecane-7,12-dione) were the main components of CB. Bisphenol A occurred in all leachates at a concentration range 0.3-4.8 μg/L. Trace metals at concentrations higher than control water were found in all leachates, albeit more represented in leachates from CB and TR. A dose response to 11 dilutions of leachates (in the range 0.6-100%) was tested for biological effects on early embryo stages of Mytilus galloprovincialis. Embryotoxicity was observed in the whole range of tested concentrations, the magnitude of effect depending on the polymers. The highest concentrations caused reduction of egg fertilization (CB, bioPET, TR) and of larvae motility (CB, PLA, TR). TR leachates also provoked larvae mortality in the range 10-100%. Effects on adult mussel physiology were evaluated after a 7-day in vivo exposure to the different leachates at 0.6% concentration. Nine biomarkers concerning lysosomal functionality, neurotransmission, antioxidant and immune responses were assessed. All lysosomal parameters were affected, and serum lysozyme activity inhibited. Harmonized chemical and biological approaches are recommended to assess bioplastic safety and support production of sustainable bioplastics.

Abundance, characteristics, and spatial-temporal distribution of microplastics in sea salts along the Cox's Bazar coastal area, Bangladesh

Microplastics (MPs), together with microfibers, have emerged as a contaminant of concern all around the globe. MPs have been detected in freshwater, seawater, sediment, and aquatic species among others. As suggested by several recent investigations, sea salts, a daily intake item by humans, are also contaminated by MPs. The current article describes MPs' occurrence, distribution, type, and timeline variation in raw sea salts from Cox's Bazar, Bangladesh. MPs have been detected in every collected salt sample, and quantity varied from 28.53 ± 2.43 to 93.53 ± 4.21 particles per kg, which was about 52.48 ± 1.72 to 67.46 ± 3.81 µg/kg of raw salt. Microfibers were MPs' dominant shape category, and the plastic types were mainly polyester or nylon. Other types of MPs were polyethylene (PE), polypropylene (PP), polycarbonate (PC), polyurethane (PU), and polystyrene (PS) in decreasing amounts. The majority of the MPs in the sea salts were in the size range of ˂ 3-1 mm. The total amount of MPs and plastic-type variation due to sampling location (p ˃ 0.05) and because of the time period (p ˃ 0.05) was found insignificant. Acetaldehyde, a volatile toxic substance produced by the degradation of polyester polymer chains, was detected in MPs in the range of 0.37 to 1.72 µg/g by headspace GC-MS analysis. Hence, the sea salts contaminated with MPs pose a public health hazard. Microplastics extraction from sea salts and their characterization.

Quantification and identification of airborne small microplastics (<100 μm) and other microlitter components in atmospheric aerosol via a novel elutriation and oleo-extraction method

The atmosphere is a significant pathway for distributing plastic particles and other micro-litter particles from their sources to other environmental compartments. There is a big gap regarding the standardized method for the quantification and identification of airborne microplastics (MPs), especially those in the range of 5-100 μm (small microplastics, SMPs) and airborne micro-litter components (MLCs), i.e., plastic additives, natural fibers and non-plastics synthetic fibers. This study aimed to develop and optimize a pre-treatment method (i.e., elutriation, oleoextraction, and purification) to extract SMPs and MLCs simultaneously from urban aerosol samples. The quantification and simultaneous chemical characterization were performed via Micro-FTIR. The method developed was then applied to two samples from different seasons, i.e., summer and late fall - winter. Micro-litter particles followed the Poisson distribution, and the fiducial limit (confidence interval) was calculated accordingly. Non-parametric statistical tests were performed to evaluate significant differences among the samples. The most abundant plastic polymers were polyethylene (HDPE) and polytetrafluoroethylene (PTFE). Among MLCs, flame retardants, UV filters, stabilizers, and rayon were identified. The results of this study will contribute significantly to establishing standardized and accredited methods to quantify and identify airborne SMPs and MLCs.

Occurrence and distribution of contaminants of legacy and emerging concern in surface waters of two Western Mediterranean coastal areas: Mar Menor Lagoon and Ebro Delta

The occurrence and distribution of UV filters, plastic additives, synthetic musks, other personal care products (Other PCPs), triazines, polycyclic aromatic hydrocarbons (PAHs), organochlorine pesticides (OCPs), organophosphorus pesticides (OPPs), polychlorinated biphenyls (PCBs) and other current-use pesticides (Other CUPs) were characterised during summer 2018 and winter 2019 in surface waters of two sensitive areas of the Spanish coast located on the Mediterranean Sea (Mar Menor lagoon and Ebro Delta). Sixty-three organic contaminants out of a total of 100 compounds were detected, thus confirming the presence of all groups of pollutants studied in surface water at concentrations of ng/L. Both areas are affected by agricultural, urban and recreational activities, PCPs (mainly UV filters) being the predominant compounds found in both seasons which showed significant increases in concentrations in summer. The contaminants found at the highest concentrations were octocrylene, homosalate and ethylhexyl salicylate, which showed risk quotients higher than 1, indicating a potential risk to aquatic organisms, particularly in summer.

Cytotoxicity assessment and suspected screening of PLASTIC ADDITIVES in bioplastics of single-use household items

Bioplastics made of renewable sources provide an excellent alternative to fossil-based materials. However, similar or greater quantities of plastic additives than fossil-based plastics are used in the formulations of bioplastics to improve their performance and barrier properties. Nowadays, there is an increasing concern about sources of chemical exposure. However, there is an important knowledge gap regarding complex additive mixtures, particularly in bio-based materials. In this study, we have characterised the presence of plastic additives in single-use materials (collected from retail shops in Spain), which are made of the most common bio-based biodegradable materials, poly(lactic acid) (PLA) and poly(hydroxybutyrate) (PHB), in contrast with a fossil-based plastic material that is extensively made from high-density polyethylene (HDPE). The approach consisted of the pulverization of material in the nano-micro range (100 nm-10 μm), with the materials being extracted using different solvents and ultrasonic-assisted solvent extraction (UASE). 100% of the additives in the material cannot be extracted, but since they were performed in the same condition for all materials can inform about the fingerprint of primary organics and the relative abundances between the different materials. The extracts were analysed by high-performance liquid chromatography coupled with high-resolution mass spectrometry equipped with a heated electrospray ionisation source operated in positive and negative ionisation conditions (HPLC-HESI(+/-)-HRMS), separately, using a suspect screening approach. A total number of 203 additives were tentatively identified (confidence level 2) in the bioplastics items of this study. An average of 123 plastic additives were found in PLA items and 121 in PHB items. Plasticisers were the most abundant additives; the phthalates group was the most commonly found, while 63 plastic additives were confirmed by standards and quantified. In parallel, the cytotoxicity of plastic particles in terms of cell viability and oxidative stress was studied using A549 alveolar basal epithelial cells, and the toxicity of the different extracts was also established using HepG2 adenocarcinoma cells. The main results of this study demonstrate that the plastic particles did not show a significant reduction in cell viability, but oxidative stress was significant, with PLA being the material that showed the highest effect. On the other hand, extracts of plastic particles did not show inhibition of cell viability except for HDPE extract, but the different extracts produced oxidative stress, with PLA showing the highest effect. Although the item showing the highest concentrations of additives was the extract of PLA material while also showing the most elevated oxidative stress, the low migration of toxicants from plastic materials ensures their safe use. However, this also supports the idea that bioplastics can contain many toxic substances in their formulations, some of which are unknown and should be studied in more depth.

The interfacial behaviors of different arsenic species on polyethylene mulching film microplastics: Roles of the plastic additives

Plastic additives widely existed in plastic mulching films, but their roles in microplastics (MPs) derived from these plastics as vectors of pollutants were not clear. This work clarified the role of plastic additives on the sorption-desorption behaviors of four arsenic species (arsenite (As(Ⅲ)), arsenate (As(Ⅴ)), roxarsone (ROX), and p-arsanilic acid (p-ASA)) on/from virgin polyethylene (V-PE), white PE mulching film (W-PE, with Si-containing additives), and black PE mulching film (B-PE, with CaCO₃ and TiO₂ additives) MPs. The maximum sorption amounts of arsenic species on V-PE (3.33-20.10 mg/kg) and W-PE MPs (4.78-21.93 mg/kg) had no significant difference, while those on B-PE (43.02-252.19 mg/kg) facilitated by its additives were up to one order of magnitude greater than V-PE or W-PE (p < 0.05). Desorption hysteresis index (HI) indicated the irreversible arsenic sorption on three PE MPs, especially for B-PE containing additives that can co-precipitate and complex with arsenicals. The effects of pH, humic substances, and coexisting anions on arsenic sorption by B-PE were more obvious than that by V-PE or W-PE MPs, attributing to electrostatic interaction enhanced by CaCO₃ and TiO₂ additives. This work provides theoretical basis for migration of arsenic species on MPs containing plastic additives and their potential environmental risk assessment.

Plastic debris as a mobile source of additive chemicals in marine environments: In-situ evidence

Plastic debris can act as a source of hazardous chemicals in the ocean, but the significance of its role in the environment is not yet known. To address this question, a comprehensive field study of highly contaminated and non-contaminated islands was conducted. Comparison of the plastic additive hexabromocyclododecanes and ubiquitous contaminants polychlorinated biphenyls in marine invertebrates showed that the load of stranded plastics plays a significant role in the bioaccumulation of plastic additives in the marine debris-contaminated island. Fugacity analysis indicates that net flow of hexabromocyclododecanes occurred from plastics to environmental reservoirs. Additionally, significantly higher levels of antioxidants, 2,4-di-tert-butylphenol and butylated hydroxytoluene, was found in the marine invertebrates inhabiting the marine debris-contaminated island than those inhabiting the marine debris-noncontaminated island, but ultraviolet stabilizers did not show the regional difference. This study provides the first field evidence that the movement of plastic debris in the ocean drives the dispersal of plastic additives to pristine waters.

A generic scenario analysis of end-of-life plastic management: Chemical additives

Plastic growing demand and the increment in global plastics production have raised the number of spent plastics, out of which over 90% are either landfilled or incinerated. Both methods for handling spent plastics are susceptible to releasing toxic substances, damaging air, water, soil, organisms, and public health. Improvements to the existing infrastructure for plastics management are needed to limit chemical additive release and exposure resulting from the end-of-life (EoL) stage. This article analyzes the current plastic waste management infrastructure and identifies chemical additive releases through a material flow analysis. Additionally, we performed a facility-level generic scenario analysis of the current U.S. EoL stage of plastic additives to track and estimate their potential migration, releases, and occupational exposure. Potential scenarios were analyzed through sensitivity analysis to examine the merit of increasing recycling rates, using chemical recycling, and implementing additive extraction post-recycling. Our analyses identified that the current state of plastic EoL management possesses high mass flow intensity toward incineration and landfilling. Although maximizing the plastic recycling rate is a reasonably straightforward goal for enhancing material circularity, the conventional mechanical recycling method requires improvement because major chemical additive release and contamination routes act as obstacles to achieving high-quality plastics for future reuse and should be mitigated through chemical recycling and additive extraction. The potential hazards and risks identified in this research create an opportunity to design a safer closed-loop plastic recycling infrastructure to handle additives strategically and support sustainable materials management efforts to transform the US plastic economy from linear to circular.

Chemical and toxicological assessment of leachates from UV-degraded plastic materials using in-vitro bioassays

The broad use of plastics and the persistence of the material results in plastic residues being found practically everywhere in the environment. If plastics remain in the (aquatic) environment, natural weathering leads to degradation processes and compounds may leach from plastic into the environment. To investigate the impact of degradation process on toxicity of leachates, different types of UV irradiation (UV-C, UV-A/B) were used to simulate weathering processes of different plastic material containing virgin as well as recyclate material and biodegradable polymers. The leached substances were investigated toxicologically using in-vitro bioassays. Cytotoxicity was determined by the MTT-assay, genotoxicity by using the p53-CALUX and Umu-assay, and estrogenic effects by the ERα-CALUX. Genotoxic as well as estrogenic effects were detected in different samples depending on the material and the irradiation type. In four leachates of 12 plastic species estrogenic effects were detected above the recommended safety level of 0.4 ng 17β-estradiol equivalents/L for surface water samples. In the p53-CALUX and in the Umu-assay leachates from three and two, respectively, of 12 plastic species were found to be genotoxic. The results of the chemical analysis show that plastic material releases a variety of known and unknown substances especially under UV radiation, leading to a complex mixture with potentially harmful effects. In order to investigate these aspects further and to be able to give recommendations for the use of additives in plastics, further effect-related investigations are advisable.

Uptake and photoinduced degradation of phthalic acid esters (PAEs) in Ulva lactuca highlight its potential application in environmental bioremediation

The bioaccumulation of phthalates was studied in fragments of Ulva lactuca exposed for a maximum of 31 days at different concentrations of a solution of six phthalic acid esters (PAEs). The algal matrix showed rapid uptake since the first sampling, which increased over the time of the experimental period, at the end of which seaweed's bioaccumulation potential was also evaluated. After the uptake, the algal matrix was subjected to UV irradiation in order to verify the removal of the phthalates. PAEs with higher octanol-water partition coefficients (logK_ow) and molecular weights were preferentially uptaken by U. lactuca in all the exposure experiments. It was observed that both accumulation (biota-sediment accumulation factor (log₁₀BSAF) ranging from 3.75 to 4.02) and photodegradation (higher than 70% removal for all phthalates in 8 h) are more efficient at lower concentration levels. These results suggest the potential use of the algal matrices for environmental bioremediation, in order to mitigate the impact of pollution from ubiquitous pollutants such as PAEs.

Short- and medium-chain chlorinated paraffins in polyvinyl chloride consumer goods available in the Japanese market

Chlorinated paraffins (CPs), including short-chain CPs (SCCPs) and medium-chain CPs (MCCPs), are hazardous chemical additives widely applied as plasticizers and flame retardants in polymers, mainly in polyvinyl chloride (PVC). In 2017, SCCPs were listed under the Stockholm Convention on Persistent Organic Pollutants (POPs). MCCPs were proposed for listing as POPs in 2021. SCCPs are also restricted under the Basel Convention, with two tentative low POP content (LPC) limits (100 and 10,000 mg kg^-1) for SCCPs in waste. As a signatory Party of both conventions, Japan must ensure their implementation and manage SCCP wastes in environmentally sound ways. Therefore, we aimed to assess the occurrence of SCCPs and MCCPs in PVC consumer goods (n = 87) available in the Japanese market. CPs were detected in 48% of the samples. Regarding positive samples, children's products and toys (1.3-120,000 mg kg^-1) were more impacted by SCCPs whereas electrical and electronic cables (1.2-59,000 mg kg^-1) and house interior products (3.5-550 mg kg^-1) were more impacted by MCCPs. Fourteen and four samples exceeded the LPC limit of 100 and 10,000 mg kg^-1 for SCCPs, respectively. Most products were impacted by CP contents (<1 % w/w) considerably below those reported as intentional CP uses in PVC. However, 11 samples with total CP contents ranging from 1.3% to 15 % (w/w) might have been impacted by intentional CP use as secondary plasticizer in PVC. Most of the impacted consumer goods available in the Japanese market were manufactured overseas, highlighting that only restricting POPs nationally is not enough for thorough implementation of the Basel and Stockholm Conventions. Therefore, imported PVC consumer goods, PVC waste and PVC recycling streams need to be monitored as relevant potential sources of SCCPs worldwide, even where the national industry strictly follows the restriction of such chemicals.

Effect of storage on the levels of phthalates in high-density polyethylene (HDPE) film-packaged drinking water

High-Density Polyethylene (HDPE)-packaged water is a popular choice for urban potable water across Africa. However, the sources and fate of priority chemical contaminants have not been adequately reported. The present study seeks to determine the effect of storage and labelling on the levels of phthalates - dimethyl phthalate (DMP), diethyl phthalate (DEP), dibutyl phthalate (DBP), benzyl butyl phthalate (BBP) and di(2-hexylethyl) phthalate (DEHP) - in HDPE packaged water. Printed and unprinted 500 mL packet samples, treated water and raw water samples were collected from two major companies in Accra and stored at three temperature levels for 28 days. Phthalates were extracted and pre-concentrated for analysis by GC-MS weekly. The results indicated that phthalates loading became detectable within the first 7 days of incubation, with printed samples showing higher concentrations than unprinted samples at every incubation temperature. The highest concentration was recorded for BBP (1.03 μg/L between a lower and upper confidence limits of 0.62 μg/L and 1.42 μg/L). Temperature significantly affected the concentration of DMP for printed packets (p-value = 0.05) and unprinted samples (p-value = 0.06), BBP across all samples, and DEHP in printed samples (p-value = 0.06). On the other hand, storage duration significantly affected the concentration of BBP across all samples. There was a very strong correlation between printing and the concentration of phthalates in the water samples (p-values <0.001) across the storage temperatures. Effect size analysis established significant differences between site-specific printed and unprinted samples. The present study revealed weak interactions between the selected phthalates and the HDPE matrix, and recommends alternative packaging that can restrict the presence of phthalates and other priority chemicals in plastic packaged drinking water.

Plasmatic B-esterases as potential biomarkers of exposure to marine plastics in loggerhead turtles

Sea turtles are particularly vulnerable to plastic exposures, and the associated chemical additives, due to their feeding strategies. The species Caretta caretta is a proposed sentinel of plastic pollution worldwide. Thus, there is a need to find adequate biomarkers of plastic exposure through non-invasive protocols for this IUCN protected species. Plasmatic acetylcholinesterase (AChE), butyrylcholinesterase (BuChE) and carboxylesterase (CE) which participate in xenobiotic and endogenous metabolic reactions could all serve as biomarkers, as they are responsive to plasticizers and have already proved adequate for identifying organophosphorus esters exposures. Here we measured plasmatic B-esterases in wild specimens captured as accidental by-catch. Measurements were taken in each individual either at entry into the rehabilitation program or immediately before release after a recovery period. For CE measurements, 4 commercial substrates were used as potentially indicative of distinct enzyme isoforms. Increased activity was seen with the butyrate-derived substrates. Plasmatic CE activities were over one order of magnitude higher than AChE and BuChE substrates. Moreover, an in vitro protocol with the inclusion of plastic additives such as tetrabromobisphenol A (TBBPA), bisphenol A and some of its analogues was considered a proxy of enzymatic interactions. A clear inhibition by TBBPA was found when using commercially purified AChE and recombinant CE proteins. Overall, from in vitro and in vivo evidences, CEs in plasma are sensitive and easily measurable and have been shown to significantly increase after turtles have been rehabilitated in rescue centres. Nevertheless, the inclusion of plastic (or plasticizers) characterisation would help to confirm its association with plasmatic enzyme modifications before they can be adopted as biomarkers of plastic contamination.

Leaching of microplastic-associated additives in aquatic environments: A critical review

Microplastic pollution has attracted significant attention as an emerging global environmental problem. One of the most important issues with microplastics is the leaching of harmful additives. This review summarizes the recent advances in the understanding of the leaching phenomena in the context of the phase equilibrium between microplastics and water, and the release kinetics. Organic additives, which are widely used in plastic products, have been introduced because they have diverse physicochemical properties and mass fractions in plastics. Many theoretical and empirical models have been utilized in laboratory and field studies. However, the partition or distribution constant between microplastics and water (K_p) and the diffusivity of an additive in microplastics (D) are the two key properties explaining the leaching equilibrium and kinetics of hydrophobic organic additives. Because microplastics in aquatic environments undergo dynamic weathering, leaching of organic additives with high K_p and/or low D cannot be described by a leaching model that only considers microplastic and water phases with a fixed boundary. Surface modifications of microplastics as well as biofilms colonizing microplastic surfaces can alter the leaching equilibrium and kinetics and transform additives. Further studies on the release of hydrophobic organic additives and their transformation products under various conditions are required to extend our understanding of the environmental fate and transport of these additives in aquatic environments.

Generation of micro(nano)plastics and migration of plastic additives from Poly(vinyl chloride) in water under radiation-free ambient conditions

A batch experiment was conducted to observe the liberation of micro- and nano-sized plastic particles and plastic additive-originated organic compounds from poly(vinyl chloride) under radiation-free ambient conditions. The weathering of PVC films in deionized water resulted in isolated pockets of surface erosion. Additional ^●OH from Fenton reaction enhanced PVC degradation and caused cavity erosion. The detachment of plastic fragments from the PVC film surfaces was driven by autocatalyzed oxidative degradation. Over 90% of micro-sized plastic particles were <60 μm in length. The detached plastic fragments underwent intensified weathering, which involved strong dehydrochlorination and oxidative degradation. Further fragmentation of micro-sized particles into nano-sized particles was driven by oxidative degradation with complete dehydrochlorination being achieved following formation of nanoplastics. 20 organic compounds released from the PVC films into the solutions were identified. And some of them can be clearly linked to common plastic additives. In the presence of additional ^●OH, the coarser nanoplastic particles (>500 nm) tended to be rapidly disintegrated into finer plastic particles (<500 nm), while the finest fraction of nanoplastics (<100 nm) could be completely decomposed and disappeared from the filtrates. The micro(nano)plastics generated from the PVC weathering were highly irregular in shape.

B-esterases characterisation in the digestive tract of the common octopus and the European cuttlefish and their in vitro responses to contaminants of environmental concern

Cephalopods are a group of marine invertebrates that have received little attention as sentinel species in comparison to other molluscs, such as bivalves. Consequently, their physiological and biochemical xenobiotic metabolism responses are poorly understood. Here we undertake a comparative analysis of the enzymatic activities involved in detoxification reactions and neural transmission in the digestive tract of two commercial cephalopods: the Common octopus, Octopus vulgaris, and the European cuttlefish, Sepia officinalis. For methodological purposes, several common B-esterases (five carboxylesterase (CE) substrates and three cholinesterase (ChE) determinations) were assayed as a proxy of metabolic and neuronal activities, respectively. Four components of the digestive tract in each species were considered: salivary glands, the stomach, the digestive gland and the caecum. The in vitro responses of digestive gland homogenates to model chemicals and contaminants of environmental concern were contrasted between both cephalopod species. The baseline biochemical activities in the four digestive tract components were also determined. Moreover, in order to validate the protocol, purified proteins, recombinant human CE (CE1 and CE2) and purified eel acetylcholinesterase (AChE) were included in the analysis. Overall, carboxylesterase activities were higher in octopus than in cuttlefish, with the activity quantified in the digestive tract components in the following order: digestive gland ≈ caecum > stomach ≈ salivary glands, with higher hydrolysis rates reached with naphthyl-derived substrates. In contrast, cuttlefish hydrolysis rates with ChE substrates were higher than in octopus. This trend was also reflected in a higher sensitivity to CE inhibitors in octopus and to AChE inhibitors in cuttlefish. Given the detoxification character of CEs and its protective role preventing AChE inhibition, octopus could be regarded as more efficiently protected than cuttlefish from neurotoxic exposures. A full characterisation of B-esterases in the digestive tract of the two common cephalopods is also provided.

The polymers and their additives in particulate plastics: What makes them hazardous to the fauna?

Due to the increasing concerns on global ecosystems and human health, the environmental risks posed by microplastics (MPs) and nanoplastics (NPs) have become an important topic of research. Their ecological impacts on various faunal species have been extensively researched and reviewed. However, the majority of those studies perceive these micro(nano)-plastics (MNPs) as a single entity rather than a collective term for a group of chemically distinct polymeric particulates. Each of the plastic polymers can possess unique physical and chemical behavior, which, in turn, can determine the possible environmental impacts. Furthermore, many studies explore the adsorption, absorption, and release of other environmental pollutants by MNPs. But only a handful of them explore the leaching of additives possessed by these polymers. Data on the environmental behavior and toxicity of individual additives associated with different polymer particulates are scarce. Knowledge about the leachability and ecotoxicity of the additives associated with environmental MNPs (unlike large plastic particles) remains limited. The ecological impacts of different MNPs together with their additives and the basis of their toxicity have not been explored yet. The present review systematically explores the potential implications of environmentally predominant polymers and their associated additives and discusses their physicochemical characteristics. The review ultimately aims to provide novel insights on what components precisely make MNPs hazardous to the fauna. The paper also discusses the major challenges proposed in the available literature along with recommendations for future research to throw light on possible solutions to overcome the hazards of MNPs.

Toxicity of di-2-ethylhexyl phthalate and tris (2-butoxyethyl) phosphate to a tropical micro-crustacean (Ceriodaphnia cornuta) is higher in Mekong River water than in standard laboratory medium

Plasticizers such as di(2-ethylhexyl) phthalate (DEHP) and tris (2-butoxyethyl) phosphate (TBOEP) are manufactured chemicals produced in high volumes. These chemicals are frequently detected in the aquatic environment and cause toxic effects on organisms. In this study, we assessed the chronic impacts of DEHP and TBOEP, respectively, at the concentration of 100 µg L^-1 dissolved in the artificial medium (M4/4) and Mekong River water on life history traits of a tropical micro-crustacean, Ceriodaphnia cornuta, for 14 days. DEHP and TBOEP substantially reduced the survival of C. cornuta. In M4/4 medium, both plasticizers strongly enhanced reproduction but did not influence the growth of C. cornuta. Mekong River water, plasticizers-exposed C. cornuta produced less neonates than those in the control. The detrimental impacts of DEHP and TBOEP on the fitness of C. cornuta were much stronger in natural river water than in M4/4. Our results suggest that plasticizers can cause adverse effects on tropical freshwater cladocerans, particularly in natural water. These results are of a deep concern, as national and international regulatory guidelines which are based on ecotoxicological tests using standard media may not fully capture these effects.