CeCu composite oxide for chlorophenol effective removal by heterogeneous catalytic wet peroxide oxidation

CeCu solid solution oxide catalysts were prepared by the complex method and characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), Brunauer-Emmett-Teller (BET), and X-ray photoelectron spectroscopy (XPS). And its activity in the catalytic wet peroxide oxidation (CWPO) of 4-chlorophenol (4-CP) and 2,4-dichlorophenol (2,4-DCP) in water was investigated. The results showed that the Cu²⁺ ions dissolved into the CeO₂ lattice to form CeCu solid solution oxide with a coarse, interconnected, porous, and cotton-like morphology. The metal-oxygen bonds were weakened by the formation of solid solution in the CeCu oxide catalyst. This weakening facilitated the activation and decomposition of the H₂O₂ to form highly oxidative HO· species that can lead to significant chlorophenol mineralization. The formation of CeCu solid solution oxide can effectively inhibit the Cu ions to be leached from the used CeCu oxide catalysts, which can ensure the CeCu oxide catalysts to adapt to a wide pH range of 2.1-7.9 and exhibit good reusability. CWPO reaction of 4-CP and 2,4-DCP molecules on CeCu oxide catalysts conforms to the first-order kinetic equation: y = 6959.3x - 17.2 and y = 9725x - 25.4, respectively. And the reaction activation energies are 57.8 and 80.8 kJ/mol, respectively. The TOC removals of 4-CP and 2,4-DCP can exceed 88 and 82%, and the dechlorination rates of 4-CP and 2,4-DCP are higher than 95 and 99.5%, respectively.

Fe3 O4 @GO on silica sand as an efficient and economical adsorbent; Typical application for removal of phenol and 2,4-dichlorophenol from water samples

In this research, the layer-by-layer coating of silica sand surface with monolayer of graphene oxide (GO) immobilized on magnetite nanoparticles (Fe₃ O₄ MNPs) sublayer was investigated as a novel, low-cost, effective, and green nanocomposite material for adsorption of phenol and 2,4-dichloro-phenol (DCP). Several characterization techniques such as FTIR spectroscopy, X-ray diffraction (XRD) analysis, and scanning electron microscopy (SEM) were used to confirm the successful synthesis of Fe₃ O₄ MNPs@GO on silica. The efficiency of Fe₃ O₄ MNPs@GO-coated silica (SiO₂ ) for the removal of the target phenolic compounds from water samples was evaluated. The maximum removal of phenol (52%) and DCP (73%) was observed using 1.0 g adsorbent, initial concentration of 12.5 mg/dm³ (for phenol) and 15 mg/dm³ (for DCP), sample volume of 10 ml (for phenol) and 15 ml (for DCP), contact time of 20 min (for phenol) and 10 min (for DCP), and pH = 5. The adsorption isotherm models of Langmuir, Freundlich, Temkin, and Dubinin-Radushkevich as well as kinetic and intraparticle diffusion models were also examined. Eventually, SiO₂ /Fe₃ O₄ MNPs@GO was regenerated five times for removal of examined contaminants and their removal efficiency from the water inlet of a water treatment plant was assessed. PRACTITIONER POINTS: Immobilizing monolayer of GO nanosheets on silica sands surface for the first time has been achieved. GO monolayer anchors on silica sands through Fe₃ O₄ nanoparticles as sublayer without using very expensive tris(hydroxymethyl) aminomethane agent. Modified silica sands are introduced as a novel and economic pollutants adsorbent, which can be used in filter sands of water treatment industry. The SiO₂ /Fe₃ O₄ MNPs@GO significantly reduces the amount of phenol and 2,4-dichloro-phenol (DCP) as model organic pollutants from water samples.

2,4-Dichlorophenol removal from water using an electrochemical method improved by a composite molecularly imprinted membrane/bipolar membrane

Low efficiency is often a problem in electrochemical reductive hydrodechlorination (ERHD) to remove chlorinated compounds such as 2,4-dichlorophenol (24DCP) from water. In this study, a composite molecularly imprinted membrane (MIM)/bipolar membrane (BPM) was introduced onto a palladium-coated titanium mesh electrode (BPM/MIM@Pd/Ti) to increase the concentration of 24DCP on the surface of electrode and ERHD efficiency. The efficiency of ERHD of 24DCP increased from 70 to 88% by introduction of the two membranes, from 71 to 89% by increasing current density from 5.0 to 30 mA/cm², and from 80 to 94% by increasing the electrolyte concentration from 0.25 to 1.00 mol/L. Treatment with Fenton's reagent after ERHD achieved 100% 24DCP removal, with chemical oxygen demand and total organic carbon reductions of 91 and 87%, respectively. Notably, these reductions were greater than obtained from the direct oxidation of the 24DCP solution by Fenton's reagent alone (i.e., 98, 84, and 72%, respectively). No products were detected in solution by GC-MS after treatment with the proposed combination technology. The mechanism of 24DCP removal and degradation involved adsorption, electrochemical hydrodechlorination via H_ads, and Fenton oxidation. Results show the process has high potential for removing 24DCP from aqueous solution.

Radiolytic oxidation and degradation of 2,4-dichlorophenol in aqueous solutions

Radiolytic oxidation of 2,4-dichlorophenol (2,4-DClP) in aqueous solutions demonstrated that ·OH predominantly adds to the unsubstituted positions of the aromatic ring and that elimination of chloride at the 4 position is important because the -OH group enhances the electron density at this position, which is favorable for the electrophilic reactions. The total yield obtained was 0.540 μmol/J. Radiation-induced degradation of 2,4-DClP was conducted in oxygen-free aqueous solutions (0.1, 0.25, 0.50, and 0.7 mmol/dm³), saturated with N₂O, and aerated and under irradiation at low and high doses. The results demonstrate that the largest degradation occurred in oxygen-free solutions due to oxidation (·OH) and reduction reactions (H· and [Formula: see text]) and attack of the [Formula: see text] at the ipso position of -Cl, producing HCl. The degradation was affected to a large extent by the concentration and to a lesser extent by the presence or absence of oxygen in which the 2,4-DClP solution was irradiated. At concentrations less than 1 mmol/dm³, 2,4-DClP was degraded in the solution at an absorbed dose level of 1 kGy. At higher doses, the product concentrations increased to up to 30% of the dose required for the total degradation of 2,4-DClP; then, they decreased. A graph plotting the logarithm of the relative concentration as a function of the dose shows a linear correlation, which indicates that the radiolytic degradation followed pseudo-first-order reaction kinetics. The oxidation was followed by the chemical oxygen demand (COD). COD decreases when the solute concentration increases. This fact has a dependence on the presence or absence of oxygen too.

One-step preparation of polyimide-inlaid amine-rich porous organic block copolymer for efficient removal of chlorophenols from aqueous solution

A novel polyimide-inlaid amine-rich porous organic block copolymer (PI-b-ARPOP) was prepared via one-step polymerization by using different molar ratios of melamine (MA)/terephthalaldehyde (TA)/pyromellitic dianhydride (PMDA), at molar ratios of 4/3/1, 4/2/2 and 4/1/3. The copolymer contained both aminal groups belonging to ARPOP and imide groups belonging to PI, and the bonding styles of the monomers and growth orientations of the polymeric chains were diversiform, forming an excellent porous structure. Notably, MA/TA/PMDA (4/2/2) had a surface area and pore volume of 487.27 m²/g and 1.169 cm³/g, respectively. The adsorption performance of the materials towards 2,4-dichlorophenol (2,4-DCP) in ultra-pure water was systematically studied. The pH value of 7 was optimal in aqueous solution. Na⁺ and Cl^- ions did not negatively affect the adsorption process, while humic acid (HA) slightly decreased the capacity. The equilibrium time was 40 sec, and the maximum adsorption capacity reached 282.49 mg/g at 298 K. The removal process was endothermic and spontaneous, and the copolymer could maintain its porous structure and consistent performance after regeneration by treatment with alkali. Moreover, to further assess the practical applicability of the material, the adsorption performance towards 2,4-DCP in river water was also investigated. This paper demonstrated that the PI-b-ARPOP can be an efficient and practical adsorbent to remove chlorophenols from aqueous solution.

Effects of process variables and kinetics on the degradation of 2,4-dichlorophenol using advanced reduction processes (ARP)

This study aims at investigating the efficiency and kinetics of 2,4-DCP degradation via advanced reduction processes (ARP). Using UV light as activation method, the highest degradation efficiency of 2,4-DCP was obtained when using sulphite as a reducing agent. The highest degradation efficiency was observed under alkaline conditions (pH = 10.0), for high sulphite dosage and UV intensity, and low 2,4-DCP concentration. For all process conditions, first-order reaction rate kinetics were applicable. A quadratic polynomial equation fitted by a Box-Behnken Design was used as a statistical model and proved to be precise and reliable in describing the significance of the different process variables. The analysis of variance demonstrated that the experimental results were in good agreement with the predicted model (R² = 0.9343), and solution pH, sulphite dose and UV intensity were found to be key process variables in the sulphite/UV ARP. Consequently, the present study provides a promising approach for the efficient degradation of 2,4-DCP with fast degradation kinetics.

Ultrasound-assisted preparation of a nanostructured zinc(II) amine pillar metal-organic framework as a potential sorbent for 2,4-dichlorophenol adsorption from aqueous solution

Using a green and simple route with ultrasound illumination under atmospheric pressure and at room temperature, the nanosized preparation of a Zn(II) metal-organic framework, [Zn(ATA)(BPD)]_∞ (ATA = 2-aminoterephthalic acid), BPD = 1,4-bis(4-pyridyl)-2,3-diaza-1,3-butadiene), having nano-plate shape and 3D channel framework, was considered and the product was named as compound 1. The X-ray diffraction (XRD), scanning electron microscopy (SEM), IR spectroscopy, Brunauer-Emmett-Teller (BET), and thermogravimetric analysis (TGA) were used for characterization of the synthesized micro/nano-structures. Further, impact of different sonication times and initial reagent contents on the shape and size of the micro/nano-structures was investigated. The results show that under ultrasound irradiation non-aggregated plates with uniform morphology can be obtained with content of [0.0125] M of the initial reagents in the presence of triethylamine (TEA) at 120 min. Moreover, through N₂ adsorption, effect of the preparation route on the porosity was explored. The bulk and nano-plates of compound 1 were also studied for adsorption of 2,4-dichlorophenol as a pollutant sample. Kinetic studies indicated that 2,4-dichlorophenol adsorption via MOF nano-plates are of first-order kinetics. Also, MOF nano-plates have significantly been reutilized for five times while their adsorption properties have remained unchanged.

Comparative toxicity of three phenolic compounds on the embryo of fathead minnow, Pimephales promelas

Phenols are classified as polar narcotics, which are thought to cause toxicity by non-specific mechanisms, possibly by disrupting membrane structure and function. Here we test three phenolic chemicals, phenol, 2,4-dichlorphenol and pentachlorophenol on embryo development, heartbeat rate and mitochondrial respiration in fathead minnow (Pimephales promelas). While these chemicals have been used on isolated mitochondria, they have not yet been used to verify respiration in intact embryos. Mitochondrial respiration in intact embryos was measured after optimizing the Seahorse XFe24 Extracellular Flux Analyzer. Heartbeat rate and mitochondrial respiration patterns of fathead minnow embryos at different developmental stages were also characterized. Exposures of embryos at developmental stage 20 occurred for 24 h with five concentrations of each phenolic compound ranging from 0.85 to 255 μM for phenol, 0.49 to 147 μM for 2,4-dichlorophenol and 0.3 to 90 μM for pentachlorophenol. Exposure to phenol at the concentrations tested had no effects on development, heartbeat or mitochondrial respiration. However, both 2,4-dichlorophenol and pentachlorophenol showed dose-dependent effects on development, heartbeat rate, and mitochondrial respiration, with the effects occurring at lower concentrations of pentachlorophenol, compared to 2,4-dichlorophenol, highlighting the higher toxicity of the more chlorinated phenols. Both 2,4-dichlorophenol and pentachlorophenol decreased basal mitochondrial respiration of embryos and ATP production. These results indicate that higher chlorinated phenolic chemicals cause developmental toxicity in fathead minnow embryos by decreasing mitochondrial respiration and heartbeat rate.

Degradation of 2, 4-dichlorophenol in aqueous solution by dielectric barrier discharge: Effects of plasma-working gases, degradation pathways and toxicity assessment

Chlorinated phenols are a class of contaminants found in water and have been regarded as a great potential risk to environment and human health. It is thus urgent to develop effective techniques to remove chlorinated phenols in wastewater. For this purpose, we employed dielectric barrier discharge (DBD) in this work and studied the efficiency of DBD for the degradation of 2,4-dichlorophenol (2,4-DCP), one of the most typical chlorophenols in the environment. The effects of pH value, applied voltage and plasma-working gases on the dichlorophenol-removal efficiency were investigated. The results demonstrate that DBD plasma could successfully degrade 2,4-DCP, achieving efficiency of 98.16% (k = 1.09 min^-1) in the Ar-DBD system, and 77.60% (k = 0.48 min^-1) in the N₂-DBD system, with the process following the first-order kinetics. The removal efficiency was reduced in the presence of radical scavengers, confirming that hydroxyl radicals played a key role in the degradation process, while other active substances were also found such as nitrogen radicals in the N₂-DBD system, which was found to have also contribution to the degradation of 2,4-DCP. The intermediates and final products generated in the degradation process were analyzed using gas chromatography-mass spectrometry (GC-MS). Based on the identification of intermediates, the degradation pathways and mechanism were proposed and discussed. Besides, the toxicity of the DBD treated 2,4-DCP solution was also assessed using GFP-expressing recombinant Escherichia coli (E. coli) as the testing organism, showing that plasma treatment could substantially reduce the toxic effect of 2,4-DCP.

In situ generation of hydroxyl radical for efficient degradation of 2,4-dichlorophenol from aqueous solutions

Since 2,4-dichlorophenol (2,4-DCP) as a priority pollutant is used in numerous industrial processes, its removal from the aqueous environment is of utmost importance and desire. Herein, the authors describe an electrochemical treatment process for efficient removal of 2,4-DCP from aqueous solutions using electro-Fenton (EF) process. Response surface methodology (RSM) was applied to optimize the operating parameters. Analysis of variance (ANOVA) confirmed the significance of the predicted model. The effect of independent variables on the removal of 2,4-DCP was investigated and the best removal efficiency of 98.28% achieved under the optimal experimental condition including initial pH of 3, H₂O₂ dosage of 80 μL, initial 2,4-DCP concentration of 3.25 mg L^-1, current density of 3.32 mA cm^-2, and inter-electrode distance of 5.04 cm. The predicted removal efficiency was in satisfactory agreement with the obtained experimental removal efficiency of 99.21%. According to the obtained polynomial model, H₂O₂ dosage revealed the most significant effect on degradation process. The kinetic investigation revealed that the first-order model with the correlation coefficient of 0.9907 and rate constant (K_app) of 0.831 min^-1 best fitted with the experimental results. Generation of the hydroxyl radicals throughout the EF process controlled the degradation process.

Efficient degradation of 2,4-dichlorophenol in aqueous solution by peroxymonosulfate activated with magnetic spinel FeCo2O4 nanoparticles

Magnetic spinel FeCo₂O₄ nanoparticles (NPs) were synthesized and proposed as a catalyst of peroxymonosulfate (PMS) for the degradation of 2,4-dichlorophenol (2,4-DCP). The catalyst was characterized by XRD, TEM, XPS, nitrogen adsorption-desorption isotherms, and magnetization curve. In addition, the effects of parameters, such as initial pH, PMS dosage, FeCo₂O₄ addition, and initial concentration of 2,4-DCP were studied. The results showed that FeCo₂O₄ NPs exhibit good properties for the degradation and mineralization of 2,4-DCP, achieving 95.8% and 44.7% removal of 2,4-DCP and TOC, respectively, within 90 min under reaction conditions of 4 mM PMS, 0.06 g L^-1 FeCo₂O₄, 100 mg L^-1 2,4-DCP, pH = 7.0, and T = 30 °C. Furthermore, SO₄^- and HO were main radical species in the reaction system was explored. The 2,4-DCP degradation efficiency could reach 91.8% even after FeCo₂O₄ NPs were used for the fifth run. Moreover, the degradation efficiencies of metronidazole (MNZ), methylene blue (MB), and rhodamine B (RhB) could reach 74.8%, 86.7%, and 96.1% under the same reaction conditions, respectively. Results revealed that the FeCo₂O₄/PMS system shows potential for degrading contaminants in the environment.

Photodegradation of 2,4-dichlorophenol by supported Pd(X2) catalyst (X = Cl, Br, N3): a HOMO manipulating point of view

Three different palladium(II) complexes with ligands containing nitrogenized aromatic rings were investigated theoretically as model to obtain the computational band gap energies. The results demonstrated promising possibility for designing palladium(II) complexes with photocatalytic properties at visible light irradiation. Deliberated products were synthesized via grafting on the silica-coated Fe₃O₄ magnetic nanoparticles (Fe₃O₄@SiO₂). Formation of complexes on the surface of Fe₃O₄@SiO₂, as insoluble and reusable photocatalysts, was proved by Fourier transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), thermogravimetric (TGA), X-ray photoelectron spectroscopy (XPS), vibrating sample magnetometer (VSM), transmission electron microscope (TEM), and scanning electron microscopy (SEM) analyses. The trend of the band gap energies of prepared structures was calculated via experimental and theoretical methods. The photocatalytic capability of these nanoparticles was investigated in degradation of 2,4-dichlorophenol by means of HPLC analysis. A tentative reaction mechanism for the formation of intermediates was proposed. Graphical abstract ᅟ.

Mimicking new receptors based on molecular imprinting and their application to potentiometric assessment of 2,4-dichlorophenol as a food taint

Innovative host-tailored polymers were prepared, characterized and used as recognition elements in potentiometric transducers for the selective quantification of 2,4-dichlorophenol (DCP).The polymer beads were synthesized using DCP as a template molecule, acrylamide (AM),methacrylic acid (MAA) and ethyl methacrylate (EMA) as functional monomers and divinylbenzene (DVB) and ethylene glycol dimethacrylate (EGDMA) as cross-linkers. The sensors were fabricated by the inclusion of MIPs in plasticized polyvinyl chloride (PVC) matrix. Response characteristics of the proposed sensors revealed anionic slopes of -59.2, -49.7 and -80.6 mV/decade with detection limits of 5.6 × 10^-5,5.9 × 10^-5 and 13.2 × 10^-5 mol/L for MIP/AM/DVB, MIP/MAA/DVB and MIP/EMA/EGDMA membrane based sensors, respectively. Good selectivity was observed over common inorganic/organic anions. Validation of the assay method according to IUPAC recommendations was justified ensuring the synthesis of good reliable novel sensors for DCP determination. The method was successfully applied for routine analysis of food taint in fish and fish farms water samples.

Sonochemical synthesis of polyoxometalate based of ionic crystal nanostructure: A photocatalyst for degradation of 2,4-dichlorophenol

Single crystals of new polyoxometalate based ionic crystal [Fe(phen)₃]₂[SiW₁₂O₄₀]·3DMF (IC-Fe), (phen=1,10-phenanthroline, DMF=N,N-dimethylformamide) and their nanoparticles (IC-Fe-NPs) have been synthesized via self-assembly of constituent ions and sonochemical reaction, respectively. All materials have been characterized by field emission scanning electron microscopy (FE-SEM), transmission electron microscopy (TEM), thermal gravimetric (TG), powder X-ray diffraction (PXRD), FT-IR spectroscopy and elemental analyses. Effect of sonication conditions on size and morphology of IC-Fe was investigated including time, concentrations of initial reagents and power of irradiation. Further studies have shown that IC-Fe is not only active in photocatalytic degradation of 2,4-dichlorophenol under visible light irradiation, but also is very stable in the various solvents and it can be easily separated and reused for cycles of reaction.

Degradation of 2,4-dichlorophenol using combined approach based on ultrasound, ozone and catalyst

The present work investigates the application of ultrasound and ozone operated individually and in combination with catalyst (ZnO and CuO) for establishing the possible synergistic effects for the degradation of 2,4-dichlorophenol. The dependency of extent of degradation on the operating parameters like temperature (over the range of 30-36°C), initial pH (3-9), catalyst as ZnO (loading of 0.025-0.15g/L) and CuO (loading of 0.02-0.1g/L) and initial concentration of 2,4-DCP (20-50ppm) has been established to maximize the efficacy of ultrasound (US) induced degradation. Using only US, the maximum degradation of 2,4-DCP obtained was 28.85% under optimized conditions of initial concentration as 20ppm, pH of 5 and temperature of 34°C. Study of effect of ozone flow rate for approach of only ozone revealed that maximum degradation was obtained at 400mg/h ozone flow rate. The combined approaches such as US+O₃, US+ZnO, US+CuO, O₃+ZnO, O₃+CuO, US+O₃+ZnO and US+O₃+CuO have been subsequently investigated under optimized conditions and observed to be more efficient as compared to individual approaches. The maximum extent of degradation for the combined operation of US+O₃ (400mg/h)+ZnO (0.1g/L) and US+O₃ (400mg/h)+CuO (0.08g/L) has been obtained as 95.66% and 97.03% respectively. The degradation products of 2,4-DCP have been identified using GC-MS analysis and the toxicity analysis has also been performed based on the anti-microbial activity test (agar-well diffusion method) for the different treatment strategies. The present work has conclusively established that the combined approach of US+O₃+CuO was the most efficient treatment scheme resulting in near complete degradation of 2,4-DCP with production of less toxic intermediates.

Typha latifolia as potential phytoremediator of 2,4-dichlorophenol: Analysis of tolerance, uptake and possible transformation processes

2,4-Dichlorophenol (2,4-DCP) is considered a priority pollutant due to its high toxicity. Therefore, it is urgent to develop technologies for the disposal of this pollutant. Various remediation processes have been proposed for the elimination of 2,4-DCP in contaminated water, however, most of them involve high costs of operation and maintenance. This study aimed to determine the capacity of remediation of 2,4-DCP in water by Typha latifolia L. wild plants. For that, the tolerance, removal, accumulation and biotransformation of 2,4-DCP by T. latifolia were investigated. The plants were exposed to 2,4-DCP solutions with a concentration range from 1.5 to 300 mgL^-1 for 10 days. They exhibited a reduction in chlorophyll levels and growth rate when 2,4-DCP solutions were ≥30 mgL^-1 and ≥50 mgL^-1, respectively. The removal of contaminant was dose-depended, being 99.7% at 1.5-3 mgL^-1, 59-70% at 10-70 mgL^-1 and 35-42% at 100-300 mgL^-1 of 2,4-DCP in the solution. Studies indicated that 2,4-DCP was mainly accumulated in root tissue rather than in shoot tissue. Acid hydrolysis of biomass extracts suggests 2,4-DCP bioconjugates formation in root tissue as a response mechanism. Additionally, an increment in glutathione S-transferase (GST) activity could indicate a 2,4-DCP conjugation with glutathione as a detoxification mechanism of T. latifolia.

Toxicity mechanisms and synergies of silver nanoparticles in 2,4-dichlorophenol degradation by Phanerochaete chrysosporium

Mechanisms of silver nanoparticles-mediated toxicity to Phanerochaete chrysosporium and the influence of silver nanoparticles (AgNPs) on the biodegradation of 2,4-dichlorophenol (2,4-DCP) have been systematically investigated. AgNPs at low doses (0-60μM) have greatly enhanced the degradation ability of P. chrysosporium to 2,4-DCP with the maximum degradation rates of more than 94%, exhibiting excellent synergies between AgNPs and P. chrysosporium in the degradation of 2,4-DCP. Meanwhile, removal of total Ag was also at high levels and highly pH dependent. However, significant inhibition was highlighted on 2,4-DCP biodegradation and Ag removal upon treatment with AgNPs at high doses and AgNO₃ at low-level exposure. Results also suggested that AgNPs-induced cytotoxicity could arise from the "Trojan-horse" mechanism executing particle effects, ion effects, or both, ruling out extracellularly released Ag⁺. Moreover, under relatively low concentrations of AgNPs exposure, 2,4-DCP was broken into linear chain organics, and eventually turned into CO₂ and H₂O through reductive dechlorination and reaction with hydroxyl radicals. FTIR analysis showed that amino, carboxyl, carbonyl, and sulfur-containing functional groups played crucial roles in Ag transportation and the reduction of Ag⁺ to Ag⁰.

Multi-substrate biodegradation of chlorophenols by defined microbial consortium

In the present study, a defined mixed microbial consortium was investigated for their ability to utilize three different monochlorophenols (MCPs) and 2,4-DCP individually and in the mixture. None of the individual strains were able to utilize 3-CP and 4-CP, but when they were mixed to form defined consortium, they have shown great potential and degradation of high concentration of 3-CP and 4-CP. Spectrophotometric analysis of metabolites during MCPs degradation establishes the presence of 2-chloromaleylacetate. Multi-substrate degradation study of 2,4-DCP in the presence of three MCPs showed the great prospect of microbial consortium for in situ bioremediation. During multi-substrate degradation, the biodegradation rate (mg L-1 day-1) was observed in the order of 2,4-DCP > 2CP > 3CP > 4CP. Biodegradation kinetic of three MCPs using Andrew's model showed maximum removal rate (R m) of 2.78, 0.91, 1.82 mg L-1 h-1 for 2-CP, 3-CP and 4-CP, respectively.

Preparation of functionalized Pd/Fe-Fe3O4@MWCNTs nanomaterials for aqueous 2,4-dichlorophenol removal: Interactions, influence factors, and kinetics

Magnetic multi-walled carbon nanotubes (MWCNTs) were prepared to support Pd/Fe nanoparticles, inhibit the aggregation and passivation, and achieve magnetic separation to avoid the environmental risk of nanoparticles. Rapid adsorption of initial contaminant, steady dechlorination, and gradual desorption of final product was observed. The micromorphology, chemical structure, and components of the nanohybrids were comprehensively characterized by a series of analysis technologies, such as EDX, XRD, SEM, TEM, and XPS. The interactions between the nanohybrids compositions were discussed according to the characterization and experimental data. The whole insight of 2,4-dichlorophenol (2,4-DCP) adsorption- dechlorination-desorption was studied in detail, including the pathways, influence factors, dechlorination kinetics and selectivity. Weak acidity (pH=5.0 and 6.5) favored the 2,4-DCP removal. Satisfactory reactivity of the Pd/Fe-Fe3O4@MWCNTs nanohybrids was observed in five consecutive runs, and 99.2%, 89.6%, 92.1%, 99.8%, and 99.9% of 2,4-DCP was removed, respectively. Most of the final product (phenol) was steadily desorbed to the liquid phase, resulted in the re-exposure of active sites on the nanohybrids and maintained a longer activity.

Enhanced dechlorination of 2,4-dichlorophenol by recoverable Ni/Fe-Fe3O4 nanocomposites

Ni/Fe-Fe₃O₄ nanocomposites were synthesized for dechlorination of 2,4-dichlorophenol (2,4-DCP). The effects of the Ni content in Ni/Fe-Fe₃O₄ nanocomposites, solution pH, and common dissolved ions on the dechlorination efficiency were investigated, in addition to the reusability of the nanocomposites. The results showed that increasing content of Ni in Ni/Fe-Fe₃O₄ nanocomposites, from 1 to 5wt.%, greatly increased the dechlorination efficiency; the Ni/Fe-Fe₃O₄ nanocomposites had much higher dechlorination efficiency than bare Ni/Fe nanoparticles. Ni content of 5wt.% and initial pH below 6.0 was found to be the optimal conditions for the catalytic dechlorination of 2,4-DCP. Both 2,4-DCP and the intermediate product 2-chlorophenol (2-CP) were completely removed, and the concentration of the final product phenol was close to the theoretical phenol production from complete dechlorination of 20mg/L of 2,4-DCP, after 3hr reaction at initial pH value of 6.0, 3g/L Ni/Fe-Fe₃O₄, 5wt.% Ni content in the composite, and temperature of 22°C. 2,4-DCP dechlorination was enhanced by Cl^- and inhibited by NO₃^- and SO₄^2-. The nanocomposites were easily separated from the solution by an applied magnetic field. When the catalyst was reused, the removal efficiency of 2,4-DCP was almost 100% for the first seven uses, and gradually decreased to 75% in cycles 8-10. Therefore, the Ni/Fe-Fe₃O₄ nanocomposites can be considered as a potentially effective tool for remediation of pollution by 2,4-DCP.

Response of selenium-dependent glutathione peroxidase in the freshwater bivalve Anodonta woodiana exposed to 2,4-dichlorophenol,2,4,6-trichlorophenol and pentachlorophenol

2,4-dichlorophenol (2,4-DCP), 2,4,6-trichlorophenol (2,4,6-TCP), and pentachlorophenol (PCP) pose a health risk to aquatic organism and humans, and are recognized as persistent priority pollutants. Selenium dependent glutathione peroxidase (Se-GPx) belongs to the family of selenoprotein, which acts mainly as an antioxidant role in the cellular defense system. In the current study, a Se-GPx full length cDNA was cloned from Anodonta woodiana and named as AwSeGPx. It had a characteristic codon at 165TGA167 that corresponds to selenocysteine(Sec) amino acid as U44. The full length cDNA consists of 870 bp, an open reading frame (ORF) of 585 bp encoded a polypeptide of 195 amino in which conserved domain (68LGFPCNQF75) and a glutathione peroxide-1 GPx active site (32GKVILVENVASLUGTT47) were observed. Additionally, the eukaryotic selenocysteine insertion sequence (SECIS) was conserved in the 3'UTR. The AwSeGPx amino acid sequence exhibited a high similarity with that of other Se-GPx. Real-time PCR analysis revealed that AwSeGPx mRNA had a widely distribution, but the highest level was observed in hepatopancreas. AwSeGPx mRNA expression was significantly up-regulated in hepatopancreas, gill and hemocytes after 2,4-DCP, 2,4,6-TCP and PCP exposure. Under similar environment, clams A. woodiana showed a more sensitive to PCP than that of 2,4-DCP and 2,4,6-TCP. These results indicate that AwSeGPx plays a protective role in eliminating oxidative stress derived from 2,4-DCP, 2,4,6-TCP and PCP treatment.

Transformation, products, and pathways of chlorophenols via electro-enzymatic catalysis: How to control toxic intermediate products

Chlorophenols can be easily oxidized into chlorobenzoquinones (CBQs), which are highly toxic and have been linked to bladder cancer risk. Herein, we report the transformation, products, and pathways of 2,4-dichlorophenol (DCP) by horseradish peroxidase (HRP) and electro-generated hydrogen peroxide (H2O2) and suggest methods to control the formation of toxic intermediate products. After a 10-min electroenzymatic process, 99.7% DCP removal may be achieved under optimal conditions. A total of 16 reaction products, most of which are subsequently verified as DCP polymers and related quinone derivatives, are identified by using ultra-performance liquid chromatography-time-of-flight mass spectrometry (UPLC-TOF-MS). A five-step reaction pathway for DCP transformation, including HRP-driven substrate oxidation, substitution and radical coupling, quick redox equilibrium, nucleophilic reaction and precipitation from aqueous solution, is proposed. Current variations and the presence of CO2 could significantly affect these reaction pathways. In particular, higher currents enhance the hydroxylation process by promoting alkaline conditions and abundant H2O2 formation. As both OH(-) and H2O2 are strong nucleophiles, they easily react with CBQ products to form hydroxylated products, which can significantly reduce solution toxicity. An adequate supply of CO2 can provide favorable pH conditions and facilitate enzymatic steps, such as substrate oxidation and radical coupling, to generate precipitable polymerized products. All of the results suggest that toxic intermediate products can be effectively reduced and controlled during the electro-enzymatic process to remove DCP and other phenolic pollutants from wastewaters.

Cagelike mesoporous silica encapsulated with microcapsules for immobilized laccase and 2, 4-DCP degradation

In this study, cage-like mesoporous silica was used as the carrier to immobilize laccase by a physical approach, followed by encapsulating with chitosan/alginate microcapsule membranes to form microcapsules of immobilized laccase based on layer-by-layer technology. The relationship between laccase activity recovery/leakage rate and the coating thickness was simultaneously investigated. Because the microcapsule layers have a substantial network of pores, they act as semipermeable membranes, while the laccase immobilized inside the microcapsules acts as a processing plant for degradation of 2,4-dichlorophenol. The microcapsules of immobilized laccase were able to degrade 2,4-dichlorophenol within a wide range of 2,4-dichlorophenol concentration, temperature and pH, with mean degradation rate around 62%. Under the optimal conditions, the thermal stability and reusability of immobilized laccase were shown to be improved significantly, as the removal rate and degradation rate remained over 40.2% and 33.8% respectively after 6cycles of operation. Using mass spectrometry (MS) and nuclear magnetic resonance (NMR), diisobutyl phthalate and dibutyl phthalate were identified as the products of 2,4-dichlorophenol degradation by the microcapsules of immobilized laccase and laccase immobilized by a physical approach, respectively, further demonstrating the degradation mechanism of 2,4-dichlorophenol by microcapsule-immobilized laccase.

Synthesis and characterization of Ag₃PO₄ immobilized with graphene oxide (GO) for enhanced photocatalytic activity and stability over 2,4-dichlorophenol under visible light irradiation

A series of visible-light responsive photocatalysts prepared using Ag3PO4 immobilized with graphene oxide (GO) with varying GO content were obtained by an electrostatically driven method, and 2,4-dichlorophenol (2,4-DCP) was used to evaluate the performance of the photocatalysts. The composites exhibited superior photocatalytic activity and stability compared with pure Ag3PO4. When the content of GO was 5%, the degradation efficiency of 2,4-DCP could reach 98.95%, and 55.91% of the total organic (TOC) content was removed within 60 min irradiation. Meanwhile, the efficiency of 91.77% was achieved for 2,4-DCP degradation even after four times of recycling in the photocatalysis/Ag3PO4-GO (5%) system. Reactive species of O2(˙-), OH˙ and h(+) were considered as the main participants for oxidizing 2,4-DCP, as confirmed by the free radical capture experiments. And some organic intermediates including 4-chlorophenol (4-CP), hydroquinone (HQ), benzoquinone (BZQ), 2-chlorohydroquinone and hydroxyhydroquinone (HHQ) were detected by comparison with the standard retention times from the high performance liquid chromatography (HPLC). In short, the enhanced photocatalytic property of Ag3PO4-GO was closely related to the strong absorption ability of GO relative to 2,4-DCP, the effective separation of photogenerated electron-hole pairs, and the excellent electron capture capability of GO.

Physiological fluxes and antioxidative enzymes activities of immobilized Phanerochaete chrysosporium loaded with TiO2 nanoparticles after exposure to toxic pollutants in solution

Immobilized Phanerochaete chrysosporium loaded with TiO2 nanoparticles (PTNs) are novel high-value bioremediation materials for adsorbing cadmium and for degrading 2,4-dichlorophenol (2,4-DCP). The real-time changes in H(+) and O2 fluxes were measured using the noninvasive microtest technique (NMT). The H(+) influx increased after the addition of 2,4-DCP, and shifted to efflux following the addition of Cd(2+). The O2 flux decreased after the addition of both 2,4-DCP and Cd(2+). A larger Cd(2+) flux was immediately observed after exposure to 0.5mM Cd(2+) (-351.25 pmol cm(-2) s(-1)) than to 0.1 mM Cd(2+) (-107.47 pmol cm(-2) s(-1)). The removal of Cd(2+) by the PTNs increased more after treatment with the 0.5 mM exposure solution (27.6 mg g(-1)) than with the 0.1 mM exposure solution (3.49 mg g(-1)). The enzyme activities were analyzed to review the antioxidative defense system of PTNs in a solution containing various concentrations of Cd(2+). The activities of the coenzyme nicotinamide adenine dinucleotide (NADH) oxidase as well as the enzyme catalase (CAT) plateaued at 6.5 U g(-1) FW and 9.7 U g(-1) FW, respectively, after exposure to 0.25 mM Cd(2+). The activity of superoxide dismutase (SOD) increased gradually in solutions containing 0.1-0.6 mM Cd(2+), and eventually reached a maximum (68.86 U g(-1) FW). These results illustrate how the antioxidative defense system and the physiological fluxes of PTNs respond to the stress caused by toxic pollutants.