Development of a molecularly imprinted membrane for selective, high-sensitive, and on-site detection of antibiotics in waters and drugs: Application for sulfamethoxazole

Sulfonamides are among the widespread bacterial antibiotics. Despite this, their quick emergence constitutes a serious problem for ecosystems and human health. Therefore, there is an increased interest in developing relevant detection method for antibiotics in different matrices. In this work, a straightforward, green, and cost-effective protocol was proposed for the preparation of a selective molecularly imprinted membrane (MIM) of sulfamethoxazole (SMX), a commonly used antibiotic. Thus, cellulose acetate was used as the functional polymer, while polyethylene glycol served as a pore-former. The developed MIM was successfully characterized through scanning electron microscopy (SEM), atomic force microscopy (AFM), Fourier transform infrared spectroscopy (FT-IR), X-ray diffraction (XRD), and thermogravimetric analysis (TGA). The MIM was used as a sensing platform in conjunction with a smartphone for optical readout, enabling on-site, selective, and highly sensitive detection of SMX. In this way, a satisfactory imprinting factor of around 3.6 and a limit of detection of 2 ng mL-1 were reached after applying response surface methodologies, including Box-Behnken and central composite designs. Besides, MIM demonstrated its applicability for the accurate and selective detection of SMX in river waters, wastewater, and drugs. Additionally, the MIM was shown to be a valuable sorbent in a solid-phase extraction protocol, employing a spin column setup that offered rapid and reproducible results. Furthermore, the developed sensing platform exhibited notable regeneration properties over multiple cycles and long shelf-life in different storage conditions. The newly developed methodology is of crucial importance to overcome the limitations of classical imprinting polymers. Furthermore, the smartphone-based platform was used to surpass the typically expensive and complicated methods of detection.

A surface multiple imprinting layers membrane with well-oriented recognition sites for selective separation of chlorogenic acid from Ficus carica L

Chlorogenic acid (CGA), known as an important natural antioxidative compound in Ficus carica L, has valuable application prospects on health food, functional food, nutrition and dietary formulations. In this study, a surface multiple imprinting layers membrane (SMILM) was developed and applied to separate CGA from F. carica. Two different imprinting layers were integrated onto the membrane surface in sequence. The first imprinting layer was formed by dopamine polymerization and the second imprinting layer was fabricated by atom transfer radical polymerization (ATRP) and boronate affinity. The prepared SMILM with well-oriented multiple recognition sites exhibited high adsorption capacity (52.08 mg·g-1 in 60 min) for CGA and specific selectivity with imprinting factor (IF) of 3.06. Furthermore, the recognition mechanism of SMILM was clarified by molecular simulation and NMR. The SMILM was successfully applied to separate CGA from the fruits, peels and leaves of F. carica with recoveries of 90.22, 83.31 and 84.95 %, respectively.

Antifouling molecularly imprinted membranes for pretreatment of milk samples: Selective separation and detection of lincomycin

As a veterinary antibiotic, lincomycin (LIN) residues in milk are raising concerns of public on account of potential harm to human health. Efficient strategy is eagerly desired for detection of LIN from milk samples. Hence, lincomycin molecularly imprinted membranes (LINMIMs) were developed for selective separation of LIN as an efficient pretreatment of milk samples. The synergistic effect of polyethylenimine and dopamine provided effective antifouling performance by improving the hydrophilicity. Based on click chemistry, specific recognition sites were facilely formed on membranes using 4-vinylpyridine as functional monomers. The satisfactory rebinding capacity (151.62 mg g^-1), permselectivity (4.43), together with the linear dependence (R² = 0.9902) of concentrations in eluents and original samples. Moreover, the method was utilized to determine LIN from milk, with good recovery and relative standard deviation. Achievements in this work will actively promote the development of efficient detection technology.

2,4-Dichlorophenol removal from water using an electrochemical method improved by a composite molecularly imprinted membrane/bipolar membrane

Low efficiency is often a problem in electrochemical reductive hydrodechlorination (ERHD) to remove chlorinated compounds such as 2,4-dichlorophenol (24DCP) from water. In this study, a composite molecularly imprinted membrane (MIM)/bipolar membrane (BPM) was introduced onto a palladium-coated titanium mesh electrode (BPM/MIM@Pd/Ti) to increase the concentration of 24DCP on the surface of electrode and ERHD efficiency. The efficiency of ERHD of 24DCP increased from 70 to 88% by introduction of the two membranes, from 71 to 89% by increasing current density from 5.0 to 30 mA/cm², and from 80 to 94% by increasing the electrolyte concentration from 0.25 to 1.00 mol/L. Treatment with Fenton's reagent after ERHD achieved 100% 24DCP removal, with chemical oxygen demand and total organic carbon reductions of 91 and 87%, respectively. Notably, these reductions were greater than obtained from the direct oxidation of the 24DCP solution by Fenton's reagent alone (i.e., 98, 84, and 72%, respectively). No products were detected in solution by GC-MS after treatment with the proposed combination technology. The mechanism of 24DCP removal and degradation involved adsorption, electrochemical hydrodechlorination via H_ads, and Fenton oxidation. Results show the process has high potential for removing 24DCP from aqueous solution.

Bioinspired synthesis of high-performance nanocomposite imprinted membrane by a polydopamine-assisted metal-organic method

Significant efforts have been focused on the functionalization and simplification of membrane-associated molecularly imprinted materials, which can rapidly recognize and separate specific compound. However, issues such as low permselectivity and unstable composite structures are restricting it from developing stage to a higher level. In this work, with the bioinspired design of polydopamine (pDA)-assisted inorganic film, we present a novel molecular imprinting strategy to integrate multilevel nanocomposites (Ag/pDA) into the porous membrane structure. The molecularly imprinted nanocomposite membranes were then obtained through an in situ photoinitiated ATRP method by using tetracycline (TC) as the template molecule. Importantly, attributing to the formation of the Ag/pDA-based TC-imprinted layers, largely enhance TC-rebinding capacity (35.41mg/g), adsorption selectivity and structural stability (still maintained 92.1% of the maximum adsorption capacity after 10 cycling operations) could been easily achieved. Moreover, largely enhanced permselectivity performance toward template molecule (the permeability factor β values were also more than 5.95) was also obtained. Finally, all synthesis methods were conducted in aqueous solution at ambient temperature, which was environmental friendly for scaling up without causing pollution.