Unveiling the influence of microaeration and sludge recirculation on enhancement of pharmaceutical removal and microbial community change of the novel anaerobic baffled biofilm - membrane bioreactor in treating building wastewater

This research aims to conduct a comparative investigation of the role played by microaeration and sludge recirculation in the novel anaerobic baffled biofilm-membrane bioreactor (AnBB-MBR) for enhancing pharmaceutical removal from building wastewater. Three AnBB-MBRs - R1: AnBB-MBR, R2: AnBB-MBR with microaeration and R3: AnBB-MBR with microaeration and sludge recirculation - were operated simultaneously to remove Ciprofloxacin (CIP), Caffeine (CAF), Sulfamethoxazole (SMX) and Diclofenac (DCF) from real building wastewater at the hydraulic retention time (HRT) of 30 h for 115 days. From the removal profiles of the targeted pharmaceuticals in the AnBB-MBRs, it was found that the fixed-film compartment (C1) could significantly reduce the targeted pharmaceuticals. The remaining pharmaceuticals were further removed with the microaeration compartment. R2 exhibited the utmost removal efficiency for CIP (78.0 %) and DCF (40.8 %), while SMX was removed most successfully by R3 (microaeration with sludge recirculation) at 91.3 %, followed by microaeration in R2 (88.5 %). For CAF, it was easily removed by all AnBB-MBR systems (>90 %). The removal mechanisms indicate that the microaeration in R2 facilitated the adsorption of CIP onto microaerobic biomass, while the enhanced biodegradation of CAF, SMX and DCF was confirmed by batch biotransformation kinetics and the adsorption isotherms of the targeted pharmaceuticals. The microbial groups involved in biodegradation of the targeted compounds under microaeration were identified as nitrogen removal microbials (Nitrosomonas, Nitrospira, Thiobacillus, and Denitratisoma) and methanotrophs (Methylosarcina, Methylocaldum, and Methylocystis). Overall, explication of the integration of AnBB-MBR with microaeration (R2) confirmed it as a prospective technology for pharmaceutical removal from building wastewater due to its energy-efficient approach characterized by minimal aeration supply.

Unlocking the power of activated carbon-mediated peracetic acid activation for efficient antibiotics abatement in groundwater: Coupling the processes of electron transfer, radical production, and adsorption

The activation of peracetic acid (PAA) by activated carbon (AC) is a promising approach for reducing micropollutants in groundwater. However, to harness the PAA/AC system's potential and achieve sustainable and low-impact groundwater remediation, it is crucial to quantify the individual contributions of active species. In this study, we developed a combined degradation kinetic and adsorption mass transfer model to elucidate the roles of free radicals, electron transfer processes (ETP), and adsorption on the degradation of antibiotics by PAA in groundwater. Our findings reveal that ETP predominantly facilitated the activation of PAA by modified activated carbon (AC600), contributing to ∼61% of the overall degradation of sulfamethoxazole (SMX). The carbonyl group (CO) on the surface of AC600 was identified as a probable site for the ETP. Free radicals contributed to ∼39% of the degradation, while adsorption was negligible. Thermodynamic and activation energy analyses indicate that the degradation of SMX within the PAA/AC600 system requires a relatively low energy input (27.66 kJ/mol), which is within the lower range of various heterogeneous Fenton-like reactions, thus making it easily achievable. These novel insights enhance our understanding of the AC600-mediated PAA activation mechanism and lay the groundwork for developing efficient and sustainable technologies for mitigating groundwater pollution. ENVIRONMENTAL IMPLICATION: The antibiotics in groundwater raises alarming environmental concerns. As groundwater serves as a primary source of drinking water for nearly half the global population, the development of eco-friendly technologies for antibiotic-contaminated groundwater remediation becomes imperative. The innovative PAA/AC600 system demonstrates significant efficacy in degrading micropollutants, particularly sulfonamide antibiotics. By integrating degradation kinetics and adsorption mass transfer models, this study sheds light on the intricate mechanisms involved, emphasizing the potential of carbon materials as sustainable tools in the ongoing battle for clean and safe groundwater.

Biochar and zero-valent iron alleviated sulfamethoxazole and tetracycline co-stress on the long-term system performance of bioretention cells: Insights into microbial community, antibiotic resistance genes and functional genes

Antibiotics and antibiotic resistance genes (ARGs), known as emerging contaminants, have raised widespread concern due to their potential environmental and human health risks. In this study, a conventional bioretention cell (C-BRC) and three modified bioretention cells with biochar (BC-BRC), microbial fuel cell coupled/biochar (EBC-BRC) and zero-valent iron/biochar (Fe/BC-BRC) were established and two antibiotics, namely sulfamethoxazole (SMX) and tetracycline (TC), were introduced into the systems in order to thoroughly investigate the co-stress associated with the long-term removal of pollutants, dynamics of microbial community, ARGs and functional genes in wastewater treatment. The results demonstrated that the SMX and TC co-stress significantly inhibited the removal of total nitrogen (TN) (C-BRC: 37.46%; BC-BRC: 41.64%; EBC-BRC: 55.60%) and total phosphorous (TP) (C-BRC: 53.11%; BC-BRC: 55.36%; EBC-BRC: 62.87%) in C-BRC, BC-BRC and EBC-BRC, respectively, while Fe/BC-BRC exhibited profoundly stable and high removal efficiencies (TN: 89.33%; TP: 98.36%). Remarkably, greater than 99% removals of SMX and TC were achieved in three modified BRCs compared with C-BRC (SMX: 30.86 %; TC: 59.29%). The decreasing absolute abundances of denitrifying bacteria and the low denitrification functional genes (nirK: 2.80 × 105-5.97 × 105 copies/g; nirS: 7.22 × 105-1.69 × 106 copies/g) were responsible for the lower TN removals in C-BRC, BC-BRC and EBC-BRC. The amendment of Fe/BC successfully detoxified SMX and TC to functional bacteria. Furthermore, the co-stress of antibiotics stimulated the propagation of ARGs (sulI, sulII, tetA and tetC) in substrates of all BRCs and only Fe/BC-BRC effectively reduced all the ARGs in effluent by an order of magnitude. The findings contribute to developing robust ecological wastewater treatment technologies to simultaneously remove nutrients and multiple antibiotics.

Drought impact on pharmaceuticals in surface waters in Europe: Case study for the Rhine and Elbe basins

Hydrological droughts are expected to increase in frequency and severity in many regions due to climate change. Over the last two decades, several droughts occurred in Europe, including the 2018-drought, which showed major adverse impacts for nature and different sectoral uses (e.g. irrigation, drinking water). While drought impacts on water quantity are well studied, little understanding exists on the impacts on water quality, particularly regarding pharmaceutical concentrations in surface waters. This study investigates the impact of the 2018-drought on concentrations of four selected pharmaceuticals (carbamazepine, sulfamethoxazole, diclofenac and metoprolol) in surface waters in Europe, with a major focus on the Elbe and Rhine rivers. Monitoring data were analysed for the period of 2010-2020 to estimate the spatiotemporal patterns of pharmaceuticals and assess the concentration responses in rivers during the 2018-drought compared to reference years. Our results indicate an overall deterioration in water quality, which can be attributed to the extremely low flow and higher water temperatures (∼ + 1.5 °C and + 2.0 °C in Elbe and Rhine, respectively) during the 2018-drought. Our results show an increase in the concentrations of carbamazepine, sulfamethoxazole, and metoprolol, but reduced concentrations of diclofenac during the 2018-drought. Significant increases in carbamazepine concentrations (+45 %) were observed at 3/6 monitoring stations in the upstream part of the Elbe, which was mainly attributed to less dilution of chemical loads from wastewater treatment plants under drought conditions. However, reduced diclofenac concentrations could be attributed to increased degradation processes under higher water temperatures (R2 = 0.60). Moreover, the rainfed-dominated Elbe exhibited more severe water quality deterioration than the snowmelt-dominated Rhine river, as the Elbe's reduction in dilution capacity was larger. Our findings highlight the need to account for the impacts of climate change and associated increases in droughts in water quality management plans, to improve the provision of water of good quality for ecosystems and sectoral needs.

Sulfur Vacancies in Pyrite Trigger the Path to Nonradical Singlet Oxygen and Spontaneous Sulfamethoxazole Degradation: Unveiling the Hidden Potential in Sediments

Pharmaceutical residues in sediments are concerning as ubiquitous emerging contaminants. Pyrite is the most abundant sulfide minerals in the estuarine and coastal sediments, making it a major sink for pharmaceutical pollutants such as sulfamethoxazole (SMX). However, research on the adsorption and redox behaviors of SMX on the pyrite surface is limited. Here, we investigated the impact of the nonphotochemical process of pyrite on the fate of coexisting SMX. Remarkably, sulfur vacancies (SVs) on pyrite promoted the generation of nonradical species (hydrogen peroxide, H2O2 and singlet oxygen, 1O2), thereby exhibiting prominent SMX degradation performance under darkness. Nonradical 1O2 contributed approximately 73.1% of the total SMX degradation. The SVs with high surrounding electron density showed an advanced affinity for adsorbing O2 and then initiated redox reactions in the sediment electron-storing geobattery pyrite, resulting in the extensive generation of H2O2 through a two-electron oxygen reduction pathway. Surface Fe(III) (hydro)oxides on pyrite facilitated the decomposition of H2O2 to 1O2 generation. Distinct nonradical products were observed in all investigated estuarine and coastal samples with the concentrations of H2O2 ranging from 1.96 to 2.94 μM, while the concentrations of 1O2 ranged from 4.63 × 10-15 to 8.93 × 10-15 M. This dark-redox pathway outperformed traditional photochemical routes for pollutant degradation, broadening the possibilities for nonradical species use in estuarine and coastal sediments. Our study highlighted the SV-triggered process as a ubiquitous yet previously overlooked source of nonradical species, which offered fresh insights into geochemical processes and the dynamics of pollutants in regions of frequent redox oscillations and sulfur-rich sediments.

Photocatalytic degradation process of antibiotic sulfamethoxazole by ZnO in aquatic systems: a dynamic kinetic model based on contributions of OH radical, oxygenated radical intermediates and dissolved oxygen

The photocatalytic degradation process of sulfamethoxazole (SMX) using ZnO in aquatic systems has been systematically studied by varying initial SMX concentration from 0 to 15 mgL-1, ZnO dosage from 0 to 4 gL-1 and UV light intensity at the light source from 0 to 18 W(m-lamp length)-1 at natural pH. Almost complete degradations of SMX were achieved within 120 min for the initial SMX concentration ≤15 mgL-1 with ZnO dosage of 3 gL-1 and UV light intensity of 18 W(m-lamp length)-1. The photocatalytic degradation process was found to be interacted with the dissolved oxygen (DO) consumption. With oxygen supply through the gas-liquid free-surface, the DO concentration decreased significantly in the initial SMX degradation phase and increased asymptotically to the saturated DO concentration after achieving about 80% SMX degradation. The change in DO concentration was probably controlled by the oxygen consumption in the formation of oxygenated radical intermediates. A novel dynamic kinetic model based on the fundamental reactions of photocatalysis and the formation of oxygenated radical intermediates was developed. In the modeling the dynamic concentration profiles of OH radical and DO are considered. The dynamics of SMX degradation process by ZnO was simulated reasonably by the proposed model.

Innovative approaches to suppress non-specific adsorption in molecularly imprinted polymers for sensing applications

Molecularly imprinted polymers (MIPs) are synthetic antibodies developed to bind selectively with specific molecules. They function through a particular recognition process involving their cavities and functional groups. Nevertheless, functional groups located outside these cavities are the main cause of non-specific molecule binding, thus reducing the effectiveness of MIPs in sensing applications. This work focused on enhancing the selectivity and performance of MIPs through electrostatic modification with surfactants. The study investigates the use of two surfactants, namely sodium dodecyl sulfate (SDS) and cetyl trimethyl ammonium bromide (CTAB), to eliminate non-specific adsorption in MIPs. The binding isotherms of the target molecule sulfamethoxazole (SMX) on MIPs and non-imprinted polymers (NIPs) were analyzed, showing higher adsorption capacity of MIPs due to the specific cavities. The modification with SDS or CTAB effectively eliminated non-specific adsorption in MIPs. The kinetic adsorption behavior further demonstrated the efficacy of MIP+--SDS/CTAB in the selective adsorption of SMX. Calibration curves showcase the methodology's analytical capabilities, achieving low limit of detection for SMX 6 ng mL-1 using MIP +-SDS. The stability study confirmed that the developed MIP +/--SDS/CTAB remains stable even at high temperatures, demonstrating its suitability for on-site applications. The methodology was successfully applied to detect SMX in milk and water samples, achieving promising recoveries. Overall, the electrostatic modification of MIPs with surfactants emerges as a valuable strategy for enhancing selectivity and performance in target molecule recognition and detection.

Green synthesis of BiVO4/Eco-graphene nanostructures for the elimination of sulfamethoxazole by adsorption and photo-degradation using blue LED light

Photo-catalysts based on BiVO4 (BV) and Eco-graphene (EG) were synthesized and obtained in a single step with high-quality properties. These nanostructures (NEs) were obtained through a green chemistry route and by adding 2, 3, and 5 wt% of a homemade EG. The BV/X EG NEs (where X = corresponds to the weight % of EG) demonstrated high photocatalytic activity, obtaining Sulfamethoxazole degradation percentages of 40, 45, 52, and 57 for BV, BV/2 EG, BV/3 EG, and BV/5 EG respectively, using a blue LED light. In addition, it was observed that the presence of EG slightly affected the surface area and porosity of BV. Moreover, it was observed that the presence of EG stabilized the scheelite monoclinic phase (m-s), and decreased the crystal size and band-gap values of BV-based samples. It was detected that EG contents increased the BV reduction, creating oxygen vacancies and V4+ states, which favored electron transfer, enhanced the photo-catalytic activity, and decreased the recombination rate. The adsorption influence of the BV/EG system was also studied. Finally, the stability tests of these materials after four cycles of reuse allowed keeping practically the full degradation capacity, demonstrating that these NEs represent a promising material driven by visible light that can be used for wastewater decontamination in the presence of drugs.

Development and validation of an UPLC-MS/MS assay for the simultaneous quantification of seven commonly used antibiotics in human plasma and its application in therapeutic drug monitoring

OBJECTIVE

To develop and validate an UPLC-MS/MS assay for simultaneous determination of the total concentration of ceftazidime, ciprofloxacin, flucloxacillin, piperacillin, tazobactam, sulfamethoxazole, N-acetyl sulfamethoxazole and trimethoprim, and the protein-unbound concentration of flucloxacillin, in human plasma to be used for research and clinical practice.

METHODS

Sample pretreatment included protein precipitation with methanol. For the measurement of protein-unbound flucloxacillin, ultrafiltration was performed at physiological temperature. For all compounds, a stable isotopically labelled internal standard was used. Reliability of the results was assessed by participation in an international quality control programme.

RESULTS

The assay was successfully validated according to the EMA guidelines over a concentration range of 0.5-100 mg/L for ceftazidime, 0.05-10 mg/L for ciprofloxacin, 0.4-125 mg/L for flucloxacillin, 0.2-60 mg/L for piperacillin, 0.15-30 mg/L for tazobactam, 1-200 mg/L for sulfamethoxazole and N-acetyl sulfamethoxazole, 0.05-10 mg/L for trimethoprim and 0.10-50 mg/L for unbound flucloxacillin. For measurement of total concentrations, the within- and between-day accuracy ranged from 90.0% to 109%, and 93.4% to 108%, respectively. Within- and between-day precision (variation coefficients, CVs) ranged from 1.70% to 11.2%, and 0.290% to 5.30%, respectively. For unbound flucloxacillin, within-day accuracy ranged from 103% to 106% and between-day accuracy from 102% to 105%. The within- and between-day CVs ranged from 1.92% to 7.11%. Results of the international quality control programme showed that the assay is reliable.

CONCLUSIONS

The method provided reliable, precise and accurate measurement of seven commonly prescribed antibiotics, including the unbound concentration of flucloxacillin. This method is now routinely applied in research and clinical practice.

Peroxymonosulfate activation by nanocomposites towards the removal of sulfamethoxazole: Performance and mechanism

Heterogeneous activation of peroxomonosulfate (PMS) has been extensively studied for the degradation of antibiotics. The cobalt ferrite spinel exhibits good activity in the PMS activation, but suffers from the disadvantage of low PMS utilization efficiency. Herein, the nanocomposites including FeS, CoS2, CoFe2O4 and Fe2O3 were synthesized by hydrothermal method and used for the first time to activate PMS for the removal of sulfamethoxazole (SMX). The nanocomposites showed superior catalytic activity in which the SMX could be completely removed at 40 min, 0.1 g L-1 nanocomposites and 0.4 mM PMS with the first order kinetic constant of 0.2739 min-1. The PMS utilization efficiency was increased by 29.4% compared to CoFe2O4. Both radicals and non-radicals contributed to the SMX degradation in which high-valent metal oxo dominated. The mechanism analysis indicated that sulfur modification, on one hand, enhanced the adsorption of nanocomposites for PMS, and promoted the redox cycles of Fe2+/Fe3+ and Co2+/Co3+ on the other hand. This study provides new way to enhance the catalytic activity and PMS utilization efficiency of spinel cobalt ferrite.

Removal of sulfamethoxazole and Cu, Cd compound pollution by arbuscular mycorrhizal fungi enhanced vertical flow constructed wetlands

The combined pollution of antibiotics and heavy metals (HMs) has a serious impact on the water ecological environment. Previous researches mainly focused on the removal of antibiotics or HMs as single pollutants, with limited investigation into the treatment efficiencies and underlying mechanisms associated with their co-occurring pollution. In this study, 16 micro vertical flow constructed wetlands (MVFCWs) were constructed to treat composite wastewater consisting of sulfamethoxazole (SMX), copper (Cu) and cadmium (Cd), involving two different inoculation treatments (arbuscular mycorrhizal fungi (AMF) inoculated and uninoculated) and eight kinds of pollutant exposure (Control Check (CK), SMX, Cu, Cd, SMX + Cu, SMX + Cd, Cu + Cd, SMX + Cu + Cd). The findings of this study demonstrated that the inoculation of AMF in MVFCWs resulted in removal efficiencies of SMX, Cu, and Cd ranging from 18.70% to 80.52%, 75.18% to 96.61%, and 40.50% to 89.23%, respectively. Cu and CuCd promoted the degradation of SMX in the early stage and inhibited the degradation of SMX in the later stage. Cd did not demonstrate a comparable promotive impact on SMX degradation, and its addition hindered Cu removal. However, comparatively, the presence of Cu exerted a more pronounced inhibitory effect on Cd removal. Furthermore, the addition of Cu augmented the abundances of Proteobacteria, Bacteroidetes (at the phylum level) and Rhodobacter, Lacunisphaera and Flavobacterium (at the genus level), and Cu exposure showed a substantially stronger influence on the microbial community than that of Cd and SMX. AMF might confer protection to plants against HMs and antibiotics by enriching Nakamurella and Lacunisphaera. These findings proved that AMF-C. indica MVFCW was a promising system, and the inoculation of AMF effectively enhanced the simultaneous removal of compound pollution.

Removal of sulfonamide antibiotics by non-free radical dominated peroxymonosulfate oxidation catalyzed by cobalt-doped sulfur-containing biochar from sludge

The reuse of activated sludge as a solid waste is severely underutilized due to the limitations of traditional treatment and disposal methods. Given that, the sulfur-containing activated sludge catalyst doped with cobalt (SK-Co(1.0)) was successfully prepared by one-step pyrolysis and calcinated at 850 ℃. The generation of CoSx was successfully characterized by X-ray diffraction (XRD) and X-ray photoelectron spectroscopy (XPS), indicating that the sulfur inside the sludge was the anchoring site for the externally doped cobalt. Cobalt (Ⅱ) (Co2+), as the main adsorption site for peroxymonosulfate(PMS), formed a complex (SK-Co(1.0)-PMS* ) and created the conditions for the generation of surface radicals. The SK-Co(1.0)/PMS system showed high degradation efficiency and apparent rate constants for Sulfamethoxazole (SMX) (91.56% and 0.187 min-1) and Sulfadiazine (SDZ) (90.73% and 0.047 min-1) within 10 min and 30 min, respectively. Three sites of generation of 1O2, which played a dominant role in the degradation of SMX and SDZ in the SK-Co(1.0)/PMS system, were summarized as：sulfur vacancies (SVs), the Co3+/Co2+ cycles promoted by sulfur(S) species, oxygen-containing functional groups (C-O). The degradation mechanisms and pathways had been thoroughly investigated using DFT calculations. In view of this, a new idea for the resource utilization of activated sludge solid waste was provided and a new strategy for wastewater remediation was proposed.

Autotrophic degradation of sulfamethoxazole using sulfate-reducing biocathode in microbial photo-electrolysis system

Sulfamethoxazole is a representative of sulfonamide antibiotic pollutants. This study aims to investigate the degradation pathways of sulfamethoxazole and the response of microbial communities using the autotrophic biocathode in microbial photo-electrolysis systems (MPESs). Sulfamethoxazole with an initial concentration of 2 mg L-1 was degraded into small molecule propanol within 6 h with the biocathode. Elemental sulfur (S0) was detected in the cathode chamber, accounting for 57 % of the removed sulfate. The conversion from sulfate to S0 indicated that autotrophic microorganisms might adopt a novel pathway for sulfamethoxazole removal in the MPES. In the abiotic cathode, sulfamethoxazole degradation rate was 0.09 mg L-1 h-1 with the electrochemistry process. However, sulfamethoxazole was converted to products that still contain benzene rings, including p-aminothiophenol, 3-amino-5-methylisoxazole, and sulfonamide. The microbial community analysis indicated that the synergistic interaction of Desulfovibrio and Acetobacterium promoted the autotrophic degradation of sulfamethoxazole. The results suggested that autotrophic microorganisms may play an important role in the environmental transformation of sulfamethoxazole.

Cytoprotective alginate microcapsule serves as a shield for microalgal encapsulation defensing sulfamethoxazole threats and safeguarding nutrient recovery

Microalgal encapsulation technology is expected to broaden more possibilities for employing microalgae for upgrading conventional biological wastewater treatment. However, only limited and fragmented information is currently available on microalgal encapsulation and pollutant removal. It is ambiguous whether it hold potential for wastewater treatment. Particularly, it remains to be determined whether this technology can provide more possibilities in harsh sewage environments. Here, potential of encapsulated technology to recover nutrients from wastewater was examined, simultaneously compared with commonly adopted suspended system. Results indicate the encapsulated microalgal system showed outstanding advantages in nutrient recovery and defense against antibiotic threats. Moreover, by examining the cellular oxidative stress response and changes of the photosynthetic system, the encapsulated system exhibited potential cytoprotective advantages to microalgal cells for defensing antibiotic threats. Molecular dynamics simulation revealed that the differences among superficial aggregation between the nutrients' ions and molecular sulfamethoxazole on the cross-linked alginate microcapsule surface dominated the nutrient recovery and cytoprotective functions. Ultimately, the molecular nature of pollutants was found to be the most critical aspect for predicting application of this microalgal microcapsule. Cytoprotective systems created with alginate microcapsules can potentially handle more diverse threats with a single type of surface charge in their outermost layer.

The critical role of microplastics in the fate and transformation of sulfamethoxazole and antibiotic resistance genes within vertical subsurface-flow constructed wetlands

Constructed wetlands (CWs) are reservoirs of microplastics (MPs) in the environment. However, knowledge about the impact of MPs on antibiotic removal and the fate of antibiotic resistance genes (ARGs) is limited. We focused on sulfamethoxazole (SMX) as a representative compound to examine the effects of MPs on SMX removal and the proliferation and dissemination of two SMX-related ARGs (sul1 and sul2) in vertical subsurface-flow CW (VFCW) microcosm. The presence of MPs in the substrate was found to enhance the proliferation of microorganisms owing to the large specific surface area of the MPs and the release of dissolved organic carbon (DOC) on MP surfaces, which resulted in a high SMX removal ranging from 97.80 % to 99.80 %. However, the presence of MPs promoted microbial interactions and the horizontal gene transfer (HGT) of ARGs, which led to a significant increase in the abundances of sul1 and sul2 of 68.47 % and 17.20 %, respectively. It is thus imperative to implement rigorous monitoring strategies for MPs to mitigate their potential ecological hazards.

Side effects of the addition of an adsorbent for the nitrification performance of a microbiome in the treatment of an antibiotic mixture

This work determined the effect of biochar (BC) as an adsorbent on the nitrifying microbiome in regulating the removal, transformation, fate, toxicity, and potential environmental consequences of an antibiotic mixture containing oxytetracycline (OTC) and sulfamethoxazole (SMX). Despite the beneficial role of BC as reported in the literature, the present study revealed side effects for the nitrifying microbiome and its functioning arising from the presence of BC. Long-term monitoring revealed severe disruption to nitratation via the inhibition of both nitrite oxidizers (e.g., Nitrospira defluvii) and potential comammox species (e.g., Ca. Nitrospira nitrificans). Byproducts (BPs) more toxic than the parent compounds were found to persist at a high relative abundance, particularly in the presence of BC. Quantitative structure-activity relationship modeling determined that the physicochemical properties of the toxic BPs significantly differed from those of OTC and SMX. The results suggested that the BPs tended to mobilize and accumulate on the surface of the solids in the system (i.e., the BC and biofilm), disrupting the nitrifiers growing at the interface. Collectively, this study provides novel insights, demonstrating that the addition of adsorbents to biological systems may not necessarily be beneficial; rather, they may generate side effects for specific bacteria that have important ecosystem functions.

Is the reliability of wastewater-based epidemiology affected by season? Comparative analysis with pharmaceuticals prescriptions

Wastewater-based epidemiology (WBE) has been already proposed by several authors for estimating the consumption of drugs, mainly the illicit ones. However, not much information is available about the actual reliability of this tool given the absence of comparison with the actual consumption. This work aims to evaluate the reliability of the WBE as a tool for estimating the consumption of pharmaceuticals in urban area. Measured consumption back-calculated with a WBE approach was compared with prescription of pharmaceutical products as "control." Moreover, seasonal influence on (i) pharmaceutical consumption, (ii) load of pharmaceutical products in the sewer system, and (iii) reliability of WBE was evaluated. Ciprofloxacin, sulfamethoxazole, metoprolol, carbamazepine, and citalopram were estimated by WBE with a difference respect to the "control" value lower than 0.2 order of magnitude while only trimethoprim and sotalol exceeded the 0.5 order of magnitude of difference but below the 1 order of magnitude. Sedatives were the best represented by WBE (on average 0.15 order of magnitude of difference compared to prescription data). However, further studies are suggested to fully estimate the influence of the type of APs on the reliability of the WBE. Seasonal patterns were found for the load of ciprofloxacin in the sewer and for the consumption of sulfamethoxazole and trimethoprim by population but seasonal changes did not have a significant impact (p > 0.05) on the reliability of WBE. Despite some gaps remained to optimize the reliability of the tool, WBE can be considered a valid method to estimate the consumption of prescribed drugs from the analysis of the sewer system.

Advanced treatment of antibiotic-polluted wastewater by a consortium composed of bacteria and mixed cyanobacteria

This study constructed a cyanobacteria-bacteria consortium using a mixture of non-toxic cyanobacteria (Synechococcus sp. and Chroococcus sp.) immobilized in calcium alginate and native bacteria in wastewater. The consortium was used for the advanced treatment of sulfamethoxazole-polluted wastewater and the production of cyanobacterial lipid. Mixed cyanobacteria increased the abundances of denitrifying bacteria and phosphorus-accumulating bacteria as well as stimulated various functional enzymes in the wastewater bacterial community, which efficiently removed 70.01-71.86% of TN, 91.45-97.04% of TP and 70.72-76.85% of COD from the wastewater. The removal efficiency of 55.29-69.90% for sulfamethoxazole was mainly attributed to the upregulation of genes encoding oxidases, reductases, oxidoreductases and transferases in two cyanobacterial species as well as the increased abundances of Stenotrophomonas, Sediminibacterium, Arenimonas, Novosphingobium, Flavobacterium and Hydrogenophaga in wastewater bacterial community. Transcriptomic responses proved that mixed cyanobacteria presented an elevated lipid productivity of 33.90 mg/L/day as an adaptive stress response to sulfamethoxazole. Sediminibacterium, Flavobacterium and Exiguobacterium in the wastewater bacterial community may also promote cyanobacterial lipid synthesis through symbiosis. Results of this study proved that the mixed cyanobacteria-bacteria consortium was a promising approach for advanced wastewater treatment coupled to cyanobacterial lipid production.

Iron hydroxyphosphate electro-Fenton catalyst for efficient removal of sulfamethoxazole and resource recycling into slow-release fertiliser ammonium ferrous phosphate

Although the electro-Fenton (EF) process is effective for wastewater treatment, recycling spent catalysts remain a major challenge. Therefore, we introduce a reuse strategy for spent catalysts where an iron hydroxyphosphate [Fe5(PO4)4(OH)3·2H2O] catalyst is utilized. Fe5(PO4)4(OH)3·2H2O obtained •OH and •O2- by activating in-situ produced H2O2, and the degradation rate of sulfamethoxazole reached 94.5% after 120 min and showed excellent stability (maintained above 90%) for 10 cycles. Finally, the used catalyst was converted into slow-release ammonium ferrous phosphate (NH4FePO4·H2O) fertiliser at a conversion rate of 85.6%. NH4FePO4·H2O significantly promoted plant and seed growth within 6 days, highlighting the contribution of the resource recycling of the spent catalyst. This study serves as a valuable reference for the efficient utilization of spent catalysts. This study successfully applied EF catalysts and explored the recycling of spent catalysts.

Environmental consequences of transformation products from an antibiotic mixture and their mitigation in a wastewater microbiome using an HCl-modified adsorbent

This study enhanced our understanding of antibiotic mixtures' occurrence, transformation, toxicity, and ecological risks. The role of acid-modified biochar (BC) in treating antibiotic residues was explored, shedding light on how BC influences the fate, mobility, and environmental impact of antibiotics and transformation products (TPs) in an activated sludge (AS) microbiome. A mixture of oxytetracycline and sulfamethoxazole was found to synergistically (or additively) inhibit cell growth of AS and disrupt the microbiome structure, species richness/diversity, and function. The formation of TPs with potentially higher toxicity and persistence than the original compounds was identified, explaining the microbiome disruption. Agricultural waste-derived BC was optimized for contaminant adsorption, leading to a reduction in toxicity when added to AS by sequestering TPs on its surface. This work highlighted adsorbents as a practical engineering strategy for mitigating liquid-phase contaminants' toxicological consequences, proactively controlling the fate and effects of antibiotics and TPs.

Oxidation of emerging contaminants by S(IV) activated ferrate: Identification of reactive species

Studies on the Fe(VI)/S(IV) process have focused on improving the efficiency of emerging contaminants (ECs) degradation under alkaline conditions. However, the performance and mechanisms under varying pH levels remain insufficiently investigated. This tudy delved into the efficiency and mechanism of Fe(VI)/S(IV) process using sulfamethoxazole (SMX) and ibuprofen (IBU) as model contaminants. We found that pH was crucial in governing the generation of reactive species, and both Fe(V/IV) and SO4•- were identified in the reaction system. Specifically, an increase in pH favored the formation of SO4•-, while the formation of Fe(VI) to Fe(V/IV) became more significant at lower pH. At pH 3.2, Fe(III) resulting from the Fe(VI) self-decay reactedwith HSO3-to produce SO4•-and •OH. Under near-neutral conditions, the coexistance of Fe(V/IV) and SO4•- in abundance contributed to the optimal oxidation of both pollutants in the Fe(VI)/S(IV) process, with the removal exceeding 74% in 5 min. Competitive quenching experiments showed that the contributions of Fe(V/IV) to SMX and IBU destruction dimished, while the contributions of radicals increased with an increase in pH. However, this evolution was slower during SMX degradation compared to IBU degradation. A comprehensive understnding of pH as the key factor is essential for the optimization of the sulfite-activated Fe(VI) oxidation process in water treatment.

Removal of selected sulfonamides and sulfonamide resistance genes from wastewater in full-scale constructed wetlands

Sulfonamides are high-consumption antibiotics that reach the aquatic environment. The threat related to their presence in wastewater and the environment is not only associated with their antibacterial properties, but also with risk of the spread of drug resistance in bacteria. Therefore, the aim of this work was to evaluate the occurrence of eight commonly used sulfonamides, sulfonamide resistance genes (sul1-3) and integrase genes intI1-3 in five full-scale constructed wetlands (CWs) differing in design (including hybrid systems) and in the source of wastewater (agricultural drainage, domestic sewage/surface runoff, and animal runs runoff in a zoo). The CWs were located in low-urbanized areas in Poland and in Czechia. No sulfonamides were detected in the CW treating agricultural tile drainage water. In the other four systems, four sulfonamide compounds were detected. Sulfamethoxazole exhibited the highest concentration in those four CWs and its highest was 12,603.23 ± 1000.66 ng/L in a CW treating a mixture of domestic sewage and surface runoff. Despite the high removal efficiencies of sulfamethoxazole in the tested CWs (86 %-99 %), it was still detected in the treated wastewater. The sul1 genes occurred in all samples of raw and treated wastewater and their abundance did not change significantly after the treatment process and it was, predominantly, at the level 105 gene copies numbers/mL. Noteworthy, sul2 genes were only found in the influents, and sul3 were not detected. The sulfonamides can be removed in CWs, but their elimination is not complete. However, hybrid CWs treating sewage were superior in decreasing the relative abundance of genes and the concentration of SMX. CWs may play a role in the dissemination of sulfonamide resistance genes of the sul1 type and other determinants of drug resistance, such as the intI1 gene, in the environment, however, the magnitude of this phenomenon is a matter of further research.

Antibiotic Combination to Effectively Postpone or Inhibit the In Vitro Induction and Selection of Levofloxacin-Resistant Mutants in Elizabethkingia anophelis

Fluoroquinolones are potentially active against Elizabethkingia anophelis. Rapidly increased minimum inhibitory concentrations (MICs) and emerging point mutations in the quinolone resistance-determining regions (QRDRs) following exposure to fluoroquinolones have been reported in E. anophelis. We aimed to investigate point mutations in QRDRs through exposure to levofloxacin (1 × MIC) combinations with different concentrations (0.5× and 1 × MIC) of minocycline, rifampin, cefoperazone/sulbactam, or sulfamethoxazole/trimethoprim in comparison with exposure to levofloxacin alone. Of the four E. anophelis isolates that were clinically collected, lower MICs of levofloxacin were disclosed in cycle 2 and 3 of induction and selection in all levofloxacin combination groups other than levofloxacin alone (all p = 0.04). Overall, no mutations were discovered in parC and parE throughout the multicycles inducted by levofloxacin and all its combinations. Regarding the vastly increased MICs, the second point mutations in gyrA and/or gyrB in one isolate (strain no. 1) occurred in cycle 2 following exposure to levofloxacin plus 0.5 × MIC minocycline, but they were delayed appearing in cycle 5 following exposure to levofloxacin plus 1 × MIC minocycline. Similarly, the second point mutation in gyrA and/or gyrB occurred in another isolate (strain no. 3) in cycle 4 following exposure to levofloxacin plus 0.5 × MIC sulfamethoxazole/trimethoprim, but no mutation following exposure to levofloxacin plus 1 × MIC sulfamethoxazole/trimethoprim was disclosed. In conclusion, the rapid selection of E. anophelis mutants with high MICs after levofloxacin exposure could be effectively delayed or postponed by antimicrobial combination with other in vitro active antibiotics.

Co-exposure of microplastics and sulfamethoxazole propagated antibiotic resistance genes in sediments by regulating the microbial carbon metabolism

The concerns on the carriers of microplastics (MPs) on co-existing pollutants in aquatic environments are sharply rising in recent years. However, little is known about their interactions on the colonization of microbiota, especially for the spread of pathogens and antibiotic resistance genes (ARGs). Therefore, this study aimed to investigate the influences on the propagation of ARGs in sediments by the co-exposure of different MPs and sulfamethoxazole (SMX). The results showed that the presence of MPs significantly enhanced the contents of total organic carbon, while having no effects on the removal of SMX in sediments. Exposure to SMX and MPs obviously activated the microbial carbon utilization capacities based on the BIOLOG method. The propagation of ARGs in sediments was activated by SMX, which was further promoted by the presence of polylactic acid (PLA) MPs, but significantly lowered by the co-exposed polyethylene (PE) MPs. This apparent difference may be attributed to the distinct influence on the antibiotic efflux pumps of two MPs. Moreover, the propagation of ARGs may be also dominated by microbial carbon metabolism in sediments, especially through regulating the carbon sources of carboxylic acids, carbohydrates, and amino acids. This study provides new insights into the carrier effects of MPs in sediments.

Performance and mechanism of SMX removal by an electrolysis-integrated ecological floating bed at low temperatures: A new perspective of plant activity, iron plaque, and microbial functions

Improvements in plant activity and functional microbial communities are important to ensure the stability and efficiency of pollutant removal measures in cold regions. Although electrochemistry is known to accelerate pollutant degradation, cold stress acclimation of plants and the stability and activity of plant-microbial synergism remain poorly understood. The sulfamethoxazole (SMX) removal, iron plaque morphology, plant activity, microbial community, and function responses were investigated in an electrolysis-integrated ecological floating bed (EFB) at 6 ± 2 ℃. Electrochemistry significantly improved SMX removal and plant activity. Dense and uniform iron plaque was found on root surfaces in L-E-Fe which improved the plant adaptability at low temperatures and provided more adsorption sites for bacteria. The microbial community structure was optimized and the key functional bacteria for SMX degradation (e.g., Actinobacteriota, Pseudomonas) were enriched. Electrochemistry improves the relative abundance of enzymes related to energy metabolism, thereby increasing energy responses to SMX and low temperatures. Notably, electrochemistry improved the expression of target genes (sadB and sadC, especially sadC) involved in SMX degradation. Electrochemistry enhances hydrogen bonding and electrostatic interactions between SMX and sadC, thereby enhancing SMX degradation and transformation. This study provides a deeper understanding of the electrochemical stability of antibiotic degradation at low temperatures.

Development of a molecularly imprinted membrane for selective, high-sensitive, and on-site detection of antibiotics in waters and drugs: Application for sulfamethoxazole

Sulfonamides are among the widespread bacterial antibiotics. Despite this, their quick emergence constitutes a serious problem for ecosystems and human health. Therefore, there is an increased interest in developing relevant detection method for antibiotics in different matrices. In this work, a straightforward, green, and cost-effective protocol was proposed for the preparation of a selective molecularly imprinted membrane (MIM) of sulfamethoxazole (SMX), a commonly used antibiotic. Thus, cellulose acetate was used as the functional polymer, while polyethylene glycol served as a pore-former. The developed MIM was successfully characterized through scanning electron microscopy (SEM), atomic force microscopy (AFM), Fourier transform infrared spectroscopy (FT-IR), X-ray diffraction (XRD), and thermogravimetric analysis (TGA). The MIM was used as a sensing platform in conjunction with a smartphone for optical readout, enabling on-site, selective, and highly sensitive detection of SMX. In this way, a satisfactory imprinting factor of around 3.6 and a limit of detection of 2 ng mL-1 were reached after applying response surface methodologies, including Box-Behnken and central composite designs. Besides, MIM demonstrated its applicability for the accurate and selective detection of SMX in river waters, wastewater, and drugs. Additionally, the MIM was shown to be a valuable sorbent in a solid-phase extraction protocol, employing a spin column setup that offered rapid and reproducible results. Furthermore, the developed sensing platform exhibited notable regeneration properties over multiple cycles and long shelf-life in different storage conditions. The newly developed methodology is of crucial importance to overcome the limitations of classical imprinting polymers. Furthermore, the smartphone-based platform was used to surpass the typically expensive and complicated methods of detection.

Performance analysis of hydrochar derived from catalytic hydrothermal carbonization in the multicomponent emerging contaminant systems: Selectivity and modeling studies

In this work, as an alternative to pyrochar, catalytic hydrothermal carbonization has been employed to synthesize hydrochar to eliminate emerging contaminants in multicomponent systems. The hydrochar has been synthesized using a single step catalytic hydrothermal carbonization at low temperature (200 °C) without any secondary activation with high specific surface area and very good adsorption efficiency for the removal of emerging contaminants. The synthesized hydrochar (HC200) was characterized using various analytical techniques and found to have porous structure with 114.84 m2.g-1 of specific surface area and also contained various oxygen-containing functionalities. The maximum adsorption efficiencies of 92.4 %, 85.4 %, and 82 % were obtained for ibuprofen, sulfamethoxazole, and bisphenol A, respectively. Humic acid, a naturally occurring organic compound had a negligible effect on the adsorption of the selected contaminants. The hydrochar's selectivity towards the emerging contaminants in binary and ternary multicomponent systems was in the order of ibuprofen > sulfamethoxazole > bisphenol A.

A workflow for the detection of antibiotic residues, measurement of water chemistry and preservation of hospital sink drain samples for metagenomic sequencing

BACKGROUND

Hospital sinks are environmental reservoirs that harbour healthcare-associated (HCA) pathogens. Selective pressures in sink environments, such as antibiotic residues, nutrient waste and hardness ions, may promote antibiotic resistance gene (ARG) exchange between bacteria. However, cheap and accurate sampling methods to characterize these factors are lacking.

AIMS

To validate a workflow to detect antibiotic residues and evaluate water chemistry using dipsticks. Secondarily, to validate boric acid to preserve the taxonomic and ARG ('resistome') composition of sink trap samples for metagenomic sequencing.

METHODS

Antibiotic residue dipsticks were validated against serial dilutions of ampicillin, doxycycline, sulfamethoxazole and ciprofloxacin, and water chemistry dipsticks against serial dilutions of chemical calibration standards. Sink trap aspirates were used for a 'real-world' pilot evaluation of dipsticks. To assess boric acid as a preservative of microbial diversity, the impact of incubation with and without boric acid at ∼22 °C on metagenomic sequencing outputs was evaluated at Day 2 and Day 5 compared with baseline (Day 0).

FINDINGS

The limits of detection for each antibiotic were: 3 μg/L (ampicillin), 10 μg/L (doxycycline), 20 μg/L (sulfamethoxazole) and 8 μg/L (ciprofloxacin). The best performing water chemistry dipstick correctly characterized 34/40 (85%) standards in a concentration-dependent manner. One trap sample tested positive for the presence of tetracyclines and sulphonamides. Taxonomic and resistome composition were largely maintained after storage with boric acid at ∼22 °C for up to five days.

CONCLUSIONS

Dipsticks can be used to detect antibiotic residues and characterize water chemistry in sink trap samples. Boric acid was an effective preservative of trap sample composition, representing a low-cost alternative to cold-chain transport.

Covalent organic framework in-situ immobilized laccase for the covalent polymerization removal of sulfamethoxazole in the presence of natural phenols: Prominent enzyme stability and activity

In current water treatment processes, pollutants are typically degraded into small molecules and CO2 for detoxification. This study employed laccase-mediated aggregation of new pollutants with natural phenolic compounds to remove pollutants by forming large molecular substances, effectively sequestering carbon. Free laccase is susceptible to environmental influences, causing deactivation. However, immobilizing laccase onto a carrier enhances enzyme stability. In the experiment, laccase was immobilized onto the covalent organic framework TpPa-1 through an in-situ loading process, resulting in immobilized laccase Lac@TpPa-1. Stability studies revealed that immobilized laccase outperformed free laccase in terms of pH, temperature, and recyclability. Moreover, immobilized laccase was employed for catalyzing the removal of emerging pollutants containing natural phenolic compounds, achieving an 80.53% removal rate with the addition of 0.02 g of laccase within 5 h. Analytical techniques like Fourier-transform ion cyclotron resonance mass spectrometry were used to uncover reaction pathways, demonstrating the presence of radical polymerization and 1, 4 nucleophilic addition. This research utilized TpPa-1 as a carrier for laccase immobilization, promoting oxidation-induced polymerization for efficient pollutant removal. It provides a theoretical foundation for understanding the interplay between emerging pollutants and phenolic compounds in natural environments and enhances the practical application of laccase through immobilization.

Characteristics of gut bacterial microbiota of black soldier fly (Diptera: Stratiomyidae) larvae effected by typical antibiotics

As agents in an emerging technology, Hermetia illucens (Linnaeus, 1758) (Diptera: Stratiomyidae) larvae, black soldier fly, have shown exciting potential for degrading antibiotics in organic solid waste, a process for which gut microorganisms play an important role. This study investigated the characteristics of larval gut bacterial communities effected by typical antibiotics. Initially, antibiotics significantly reduced the diversity of gut bacterial species. After 8 days, diversity recovered to similar to that of the control group in the chlortetracycline, tylosin, and sulfamethoxazole groups. Proteobacteria, Firmicutes, and Actinobacteriota were the dominant phyla at the initial BSFL gut. However, after 4 days treatment, the proportion of Actinobacteriota significantly decreased, but Bacteroidota notably increased. During the conversion process, 18, 18, 17, 21, and 19 core genera were present in the chlortetracycline, sulfamethoxazole, tylosin, norfloxacin, and gentamicin groups, respectively. Pseudomonas, Actinomyces, Morganella, Providencia and Klebsiella might be the important genera with extraordinary resistance and degradation to antibiotics. Statistical analyses of COGs showed that antibiotics changed the microbial community functions of BSFL gut. Compared with the control group, (i) the chlortetracycline, sulfamethoxazole, and tylosin groups showed significant increase in the classification functions of transcription, RNA processing and modification，and so on, (ii) the norfloxacin and gentamicin groups showed significant increase in defense mechanisms and other functions. Note that we categorized the response mechanisms of these classification functions to antibiotics into resistance and degradation. This provides a new perspective to deeply understand the joint biodegradation behavior of antibiotics in environments, and serves as an important reference for further development and utilization of microorganisms-assisted larvae for efficient degradation of antibiotics.

A promising electrochemical sensor based on PVP-induced shape control of a hydrothermally synthesized layered structured vanadium disulfide for the sensitive detection of a sulfamethoxazole antibiotic

The presence of sulfamethoxazole (SMX) in natural waters has become a significant concern recently because of its detrimental effects on human health and the ecological environment. To address this issue, it is of utmost urgency to develop a reliable method that can determine SMX at ultra-low levels. In our research, we utilized PVP-induced shape control of a hydrothermal synthesis method to fabricate layer-like structured VS2, and employed it as an electrode modification material to prepare an electrochemical sensor for the sensitive determination of SMX. Thus, our prepared VS2 electrodes exhibited a linear range of 0.06-10.0 μM and a limit of detection (LOD) as low as 47.0 nM (S/N = 3) towards SMX detection. Additionally, the electrochemical sensor presented good agreement with the HPLC method, and afforded perfect recovery results (97.4-106.8%) in the practical analysis. The results validated the detection accuracy of VS2 electrodes, and demonstrated their successful applicability toward the sensitive determination of SMX in natural waters. In conclusion, this research provides a promising approach for the development of electrochemical sensors based on VS2 composite materials.

Insights into the influence and mechanism of biomass substrate and thermal conversion conditions on FeN doped biochar as a persulfate activator for sulfamethoxazole removal

Fe-N-doped biochar is a promising material for advanced-oxidation heterogeneous catalysis, but its adsorption-catalytic performance is significantly affected by biomass feedstock compositions and thermal conversion conditions and is not yet conclusive. In this paper, four lignocellulosic biomasses (rice straw, bamboo, poplar wood, and corn stover) were selected as raw materials to prepare Fe-N-biochar as persulfate activators by hydrothermal-thermolysis composite. Their lignocellulosic fractions and elemental contents were detected, and a variety of thermal conversion conditions were investigated for the rice straw-based Fe-N-biochar with the best activation performance among them. It was found that the holocellulose and lignin contents of the biomass affected the catalytic activity of the prepared catalysts with correlation coefficients of 0.57 and -0.93, respectively. Increasing the pyrolysis temperature from 500 °C to 800 °C could increase the ratio of Fe2+/Fe3+ and the relative amounts of CC, graphitized N, and oxidized N in the catalyst by 0.17 %, 7 %, 12 %, and 18 %, respectively. Extending the pyrolysis time from 0.5 to 2 h was able to increase the relative content of CC, graphitized N, and oxidized N by 0.18 %, 3 %, 9 %, and 4 %, respectively. The most catalytically active rice straw-derived Fe-NRBC was able to remove 91.7 % of sulfamethoxazole (SMX) and 93.07 % of TOC mainly via ·SO4- and ·OH in an adsorption-catalytic reaction of 60 min with a k of 0.047 min-1 and the main active sites are FeN, Fe0, pyridine N, oxidized N and CO. Finally, degradation intermediates and pathways were also characterized. This paper is expected to provide a basis for the future targeted regulation of Fe-N biochar for water pollution treatment.

Rational design of animal-derived biochar composite for peroxymonosulfate activation: Understanding the mechanism of singlet oxygen-mediated degradation of sulfamethoxazole

Animal-derived biochar are identified as a promising candidate for peroxymonosulfate (PMS) activation due to the abundant aromatics and oxygen-containing functional groups. The current investigation focuses on pig carcass-derived biochar (800-BA-PBC) by ball milling-assisted alkali activation. The results showed that 800-BA-PBC could effectively activate PMS and degraded 94.2% sulfamethoxazole (SMX, 10 mg/L) within 40 min. The reaction rate constant was found to be 47 times higher than that observed with PBC. The enhanced catalytic activity is mainly attributed to the increase in specific surface area, the increase content of oxygen-containing groups on the surface, and the formation of graphitic nitrogen. The quenching tests and electron paramagnetic resonance (EPR) analysis demonstrated that 1O2 is the main active species in the degradation of SMX. Moreover, the 800-BA-PBC + PMS system can maintain excellent degradation rate under different water quality, wide pH range, and the presence of different anions. The degradation pathways of SMX in the optimal system are also evaluated through intermediate identification and DFT calculation. These results indicate that the catalytic system has high anti-interference ability and practical application potential. This investigation provides new insight into the rational design of animal-derived biochar and develops a low-cost technology for the treatment of antibiotic containing wastewater.

Synergistic interface engineering in n-p-n type heterojunction Co3O4/MIL/Mn-STO with dual S-scheme multi-charge migration to enhance visible-light photocatalytic degradation of antibiotics

Constructing an effective multi-heterojunction photocatalyst with maximum charge carrier separation remains challenging. Herein, a high-efficient Co3O4/MIL-88A/Mn-SrTiO3 (Co3O4/MIL/Mn-STO) n-p-n heterojunction photocatalyst was successfully prepared by a simple hydrothermal method for the photodegradation of sulfamethoxazole (SMX). The combination of MIL and Co3O4/Mn-STO established an internal electric field and heterojunction, accelerating the separation of carriers, and thus improved photocatalytic performance. In the Co3O4/MIL/Mn-STO photocatalytic system, 95.5 % of SMX was degraded in 90 min. The photocatalytic kinetic removal rate of Co3O4/MIL/Mn-STO reached 0.0337 min-1, 8 times of Co3O4 (0.0041 min-1), 5.2 times of Mn-STO (0.0062 min-1), 4.6 times of MIL (0.0078 min-1), and 3.6 times of MIL/Mn-STO (0.0095 min-1). Remarkably, superoxide radicals (•O2-) and holes (h+) have been recognized as the main active species in the degradation process through reactive species elimination experiments and electron spin resonance (ESR) tests. The experimental and theoretical proved the in-built interfacial contact and synergistic effect between the photocatalyst accomplished with low bandgaps, high specific surface area, more reaction sites, high electron-hole pair separation, and maximum solar-light utilization. The molecular structure and possible degradation routes with intermediate products in the photocatalytic system were investigated using a liquid chromatography-mass spectrometer (LC-MS) and DFT calculations. This work provided new insight into the guidelines of rational design/growth of new multicomponent photocatalysts to remove antibiotics and other emerging contaminants in wastewater.

Interface engineering of 0D/2D Cu2O/BiOBr Z-scheme heterojunction for efficient degradation of sulfamethoxazole: Mechanism, degradation pathway, and DFT calculation

Constructed heterojunction has been considered an efficient strategy to enhance the migration and transfer of photoinduced charge carriers. Herein, a Z-scheme Cu2O/BiOBr heterojunction with 0D/2D structure was fabricated by microwave hydrothermal method. It was found that the optimal composites photocatalyst showed excellent activity for sulfamethoxazole (SMZ) illumination, and the removal rate reached 90.7%, which was higher than pristine Cu2O (53.0%) and BiOBr (60.0%). Subsequently, the operational parameters such as catalyst dosage, concentrations of pollutants, and pH of solution were investigated. According to the ultraviolet-visible diffuse reflectance spectroscopy (UV-Vis DRs), Mott-Schottky curve, and density functional theory (DFT) analysis, the Z-scheme degradation mechanism of Cu2O/BiOBr heterostructure was proposed. Among them, the interface structure of 0-dimensions/2-dimensions (0D/2D) can significantly increase the number of heterojunctions in the composite catalyst, and Z-scheme heterostructures can accelerate the generation and migration of photoinduced charge carriers, which has a facilitation effect on improving the decomposition activity of the photocatalyst. Moreover, three possible pathways for SMZ degradation were inferred. This study provides a promising strategy for constructing novel heterojunctions with high photocatalytic performance.

Sulfamethoxazole removal from wastewater via anoxic/oxic moving bed biofilm reactor: Degradation pathways and toxicity assessment

The effects of sulfamethoxazole (SMZ), an antibiotic commonly detected in the water environment, on the performance of a single staged anoxic/oxic moving bed biofilm reactor (A/O MBBR), was investigated. The anoxic zone played a key role in the removal of SMZ with a percentage of contribution accounting for around 85% in the overall removal. Denitrifying heterotrophic microbes present in the anoxic zone showed relatively more resistance to higher SMZ loads. It was found that in extracellular polymeric substances, protein content was increased consistently with the increase in SMZ concentration. Based on the detected biotransformation products, four degradation pathways were proposed and the toxicity was evaluated. Metagenomic analysis revealed that at higher SMZ load the activity of genera, such as Proteobacteria and Actinobacteria was significantly affected. In summary, proper design and operation of staged A/O MBBR can offer a resilient and robust treatment towards SMZ removal from wastewater.

The environmental risk assessment of constructed wetlands filled with iron and manganese ores in typical antibiotic treatment

Constructed wetlands (CWs) is considered as an efficient and environmentally friendly technology for advanced wastewater treatment to eliminate organic pollutants such as sulfamethoxazole (SMX) and trimethoprim (TMP). Iron (Fe) and manganese (Mn) ores have attracted more and more attention as CWs substrates in treating SMX and TMP, but the potentially negative environmental effects of wetland effluents, ore contaminants leached from the substrates and the risk of transmission of antibiotic resistance genes (ARGs) are still not clear. Three CW groups with different substrates (river sand (C-CW), Fe ore (Fe-CW), and Mn ore (Mn-CW)) were set up to evaluate the average removal rates and environmental risk in treating wastewater containing SMX and TMP. The results showed that the average removal rates of SMX and TMP by Fe-CW and Mn-CW were significantly higher than that of C-CW by 12.46%, 6.59% and 38.93%,15.39% respectively (p < 0.05), suggesting that both Fe and Mn ores facilitated the removal of antibiotics. However, the least abundance of ARGs was found in the layer of Fe ore at the middle layer (ML) in Fe-CW among all CWs, which suggested that Fe ore could reduce the risk of ARGs transmission. Although the environmental risk of Fe-CW and Mn-CW effluent was low, Fe-CW effluent inhibited the growth of Chlorella in both 48h and 72h experiments, while Mn-CW effluent showed an inhibitory effect in 48h and then promoted the growth in 72h. Meanwhile, these findings offer valuable insights for wetland health assessment and substrate selection for CWs.

Common teratogenic medication exposures-a population-based study of pregnancies in the United States

BACKGROUND

Risk mitigation for most teratogenic medications relies on risk communication via drug label, and prenatal exposures remain common. Information on the types of and risk factors for prenatal exposures to medications with teratogenic risk can guide strategies to reduce exposure.

OBJECTIVE

This study aimed to identify medications with known or potential teratogenic risk commonly used during pregnancy among privately insured persons.

STUDY DESIGN

We used the Merative™ MarketScan® Commercial Database to identify pregnancies with live or nonlive (ectopic pregnancies, spontaneous and elective abortions, stillbirths) outcomes among persons aged 12 to 55 years from 2011 to 2018. Start/end dates of medication exposure and pregnancy outcomes were identified via an adapted algorithm based on validation studies. We required continuous health plan enrollment from 90 days before conception until 30 days after the pregnancy end date. Medications with known or potential teratogenic risk were selected from TERIS (Teratogen Information System) and drug monographs based on the level of risk and quality of evidence (138 with known and 60 with potential risk). We defined prenatal exposure on the basis of ≥1 outpatient pharmacy claim or medical encounter for medication administration during target pregnancy periods considering medication risk profiles (eg, risk only in the first trimester or at a certain dose threshold). Sex hormones and hormone analogs, and abortion and postpartum/abortion hemorrhage treatments were not considered as teratogenic medications because of challenges in separating pregnancy-related indications, nor were opioids (because of complex risk-benefit considerations) or antiobesity medications if their only teratogenic mechanism was weight loss.

RESULTS

Among all pregnancies, the 10 medications with known teratogenic risk and the highest prenatal exposures were sulfamethoxazole/trimethoprim (1988 per 100,000 pregnancy-years), high-dose fluconazole (1248), topiramate (351), lisinopril (144), warfarin (57), losartan (56), carbamazepine (50), valproate (49), vedolizumab (28 since 2015), and valsartan (25). Prevalence of exposure to sulfamethoxazole/trimethoprim decreased from 2346 to 1453 per 100,000 pregnancy-years from 2011 to 2018, but prevalence of exposure to vedolizumab increased 6-fold since its approval in 2015. Prenatal exposures in the first trimester were higher among nonlive pregnancies than among live-birth pregnancies, with the largest difference observed for warfarin (nonlive 370 vs live birth 78), followed by valproate (258 vs 86) and topiramate (1728 vs 674). Prenatal exposures to medications with potential teratogenic risk were most prevalent for low-dose fluconazole (6495), metoprolol (1325), and atenolol (448). The largest first-trimester exposure differences between nonlive and live-birth pregnancies were observed for lithium (242 vs 89), gabapentin (1639 vs 653), and duloxetine (1914 vs 860). Steady increases in hydralazine and gabapentin exposures were observed during the study years, whereas atenolol exposure decreased (561 to 280).

CONCLUSION

Several medications with teratogenic risk for which there are potentially safer alternatives continue to be used during pregnancy. The fluctuating rates of prenatal exposure observed for select teratogenic medications suggest that regular reevaluation of risk mitigation strategies is needed. Future research focusing on understanding the clinical context of medication use is necessary to develop effective strategies for reducing exposures to medications with teratogenic risk during pregnancy.

Development of a national antibiotic multimetric index for identifying watersheds vulnerable to antibiotic pollution

Improved surveillance of antibiotics and antibiotic resistance (AR) throughout the environment is an important aspect of the prevention and control of threats posed to human and ecological health. In response to field investigations often limited by resources and time, this study aims to develop a systematic approach to assess watershed vulnerability to antibiotic pollution and AR by integrating modeling and field studies. The national antibiotic pollution vulnerability index was developed to identify watersheds most impacted by antibiotic sources. The index incorporates multiple metrics representing antibiotic pollution driven by both agricultural activities and municipal wastewater (i.e. outpatient antibiotic prescriptions, wastewater treatment plant effluent flow, stream order and dilution factor of effluent-receiving streams, manure application, and animal facilities), alongside climate change indicators (i.e., temperature, precipitation, and runoff). The pollution index was applied at a state level in North Carolina to identify the most-impacted watersheds and inform site selection for targeted field study quantifying azithromycin, ciprofloxacin, sulfamethoxazole, and trimethoprim concentrations. Modeled-informed sites in NC demonstrated the highest reported concentrations of azithromycin, trimethoprim, and sulfamethoxazole compared to previous NC studies, confirming the index effectiveness in identifying watersheds with higher antibiotic concentrations. At the national scale, watersheds relatively more vulnerable to antibiotic pollution are predominantly located in the Midwest, South, and Northeast regions of the U.S., with Iowa and Indiana being the most impacted states. Climate change is expected to exacerbate watershed vulnerability to agriculture-driven AR in the Midwest and Northeast due to an increase in precipitation and mean temperature coupled with intense agricultural activities. In addition, due to climate change-induced reductions in precipitation and runoff, watersheds in the Midwest, Mid-Atlantic, and South Central are dominantly at higher risk of effluent-driven AR occurrences. We have disseminated the developed indices as open-source online tools to aid in prioritizing strategies to mitigate AR occurrence across the U.S.

Effects of zero-valent iron (ZVI) on nitrogen conversion, transformation of sulfamethoxazole (SMX) and abundance of antibiotic resistance genes (ARGs) in aerobic granular sludge process

Even after pre-treatment, livestock and poultry wastewater still contain high concentrations of ammonia and residual antibiotics. These could be removed economically using the aerobic granular sludge (AGS) process with zero-valent iron (ZVI). The interaction of antibiotics and nitrogen in this process needs to be clarified and controlled, however, to achieve good removal performance. Otherwise, antibiotics might generate transformation products (TPs) with higher toxicity and lead to the emergence of antibiotic-resistant bacteria carrying antibiotic resistance genes (ARGs), which could cause persistent toxicity and the risk of disease transmission to the ecological environment. This study investigated the impact of ZVI on AGS for nitrogen and sulfamethoxazole (SMX) removal. The results show that AGS could maintain good ammonia removal performance and that the existence of SMX had a negative impact on ammonia oxidation activities. ZVI contributed to an increase in the abundance of nitrite oxidation bacteria, denitrifying bacteria and the functional genes of nitrogen removal. This led to better total nitrogen removal and a decrease in N2O emission. Accompanied by biological nitrogen transformation, SMX could be transformed into 14 TPs through five pathways. ZVI has the potential to enhance transformation pathways with TPs of lower ecotoxicity, thereby reducing the acute and chronic toxicity of the effluent. Unfortunately, ZVI might enhance the abundance of sul1, sul2, and sul3 in AGS, which increases the risk of sulfonamide antibiotic resistance. In AGS, Opitutaceae, Xanthomonas, Spartobacteria and Mesorhizobium were potential hosts for ARGs. This study provides theoretical references for the interaction of typical antibiotics and nitrogen in the biological treatment process of wastewater and bioremediation of natural water bodies.

An integrated framework to develop an efficient valid green (EVG) HPLC method for the assessment of antimicrobial pollutants with potential threats to human health in aquatic systems

The persistence of antimicrobial drugs in aquatic environments has raised critical concerns about their possible impact on drinkable water quality and human health. The Nile River is experiencing water pollution owing to increasing discharges of highly contaminated home and industrial effluents and inadequate water management systems. Investigations of the presence of three antimicrobial agents, ciprofloxacin (CIP), sulfamethoxazole (SMZ), and albendazole (ALB), in the Egyptian aquatic system are recommended using a chromatographic method because of their reported existence in the African aquatic environment. In this study, an integrated framework, Efficient Valid Green (EVG), for analytical techniques is proposed and displayed via its radar chart. The EVG framework is achieved through three main pillars: efficiency, validation, and greenness. The proposed EVG-HPLC method was developed and optimized using the AQbD methodology via a face-centered composite (FCC) design by identifying the proper critical method parameters (CMPs) that influence critical quality attributes (CQAs). The method was fully validated according to ICH guidelines, including a factorial robustness study within concentration ranges of 1-100 μg mL-1, 2-100 μg mL-1, and 10-100 μg mL-1 for CIP, SMZ, and ALB, respectively. The proposed method was evaluated in terms of greenness using AGREE (score 0.55) and ComplexGAPI metrics. The optimized chromatographic conditions included a C18 column and a mobile phase of water : acetonitrile : methanol in a ratio of 60 : 19 : 21, v/v/v, respectively, with an aqueous solution of pH 3.5 adjusted with phosphoric acid at a flow rate of 1.57 mL min-1 at 285 nm. The raw water samples collected from Nile River freshwater at different locations were treated using Oasis® PRiME HLB cartridges with satisfactory recoveries for the three analytes (>90%), and the three drugs were detected using the proposed EVG-HPLC method.

[Epidemiologic characteristics and drug resistance of isolated from blood culture escherichia coli in a hospital in Qinghai Province from 2016 to 2022]

Objective: To explore the drug resistance of Isolated From Blood Culture Escherichia coli (E. coli) in a hospital in Qinghai over the past seven years, to evaluate the ability of matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOF MS) to analyze the homologous origin of E. coli, and to establish a protein fingerprint library to match with it, adjuvant clinical experience medication so as to provide the basis for the prevention and control of hospital-acquired infections. Methods: Retrospective analysis of blood cultures sent to hospitals from January 2016 to December 2022. Drug resistance and resistance changes in E. coli.A total of 1 841 E. coli strains were isolated from Qinghai Provincial People's Hospital from January 2016 to December 2022; all strains were identified by MALDI-TOF MS, and the VITEK2.0 drug sensitivity analyzer was applied for drug sensitivity analysis of the strains, and the mass spectrometry homology analysis and self-constructed protein fingerprint library were carried out by MALDI-Biotyper software; the protein fingerprint library was built by using WHONET5.6 software was used to statistically analyze the drug sensitivity results, SPSS23.0 software was used to analyze the relationship between fingerprint typing and drug sensitivity, and the χ2 test was used for intergroup comparisons. Results: A total of 1 841 strains of E. coli were detected in 4 582 positive blood culture specimens from January 2016 to December 2022, with a detection rate of 40.17%; the resistance rate of E. coli from blood sources to piperacillin/tazobactam and ceftriaxone was on the rise, and it was slightly decreased to cefepime, amikacin, levofloxacin, and sulfamethoxazole, and there was not much change to the rest of the drugs; After MALDI-Biotyper clustering analysis, the 1841 E. coli strains from Isolated From Blood Culture were classified into two major clusters and five subtypes, of which type Ⅰa1 accounted for about 40%, type Ⅰa2 accounted for about 2.7%, type Ⅰb accounted for about 3.8, type Ⅱa accounted for about 46%, and type Ⅱb accounted for about 7.5%. The detection rate of type Ⅰa1 E. coli was higher in general surgery (50.45%) and emergency surgery (50.92%), and the detection rate of type Ⅰb E. coli was higher in emergency medicine(10.05%)than in other departments. The drug sensitivity results of different subtypes were compared with each other, the resistance rate of type Ⅰa1 E. coli to cefepime was 21.3% higher than that of the remaining four types, and the difference was statistically significant (χ2=37.74,P=0.000); the resistance rate of type Ⅱ E. coli(>60%) to sulfamethoxazole was higher than that of type Ⅰ (<60%) as a whole, and the difference was statistically significant (χ2=15.248,P=0.004); and a preliminary database of homologous protein fingerprints of E. coli has been established E. coli homologous protein fingerprint library and validated. The drug susceptibility results of 1 288 E. coli strains in the validation set were statistically analyzed and compared with those in the training set. There was no significant difference(P>0.05). Conclusion: In recent years, the resistance rate of E. coli isolated from a hospital in Qinghai province to piperacillin/Tazobactam, cefepime, amicacin and other antibiotics has changed greatly. A fingerprint database of E. coli homologous protein was established, and it was found that the drug sensitivity data of E. coli were different among different fingerprint types. According to drug sensitivity, drug use could assist clinical experience and provide evidence for prevention and control of hospital illness.

SUNLIGHT-INDUCED decontamination of water from emerging pharmaceutical pollutants using ZnO nanoparticles

A new class of environmental pollutants that have become a significant concern for the entire world's population over the last few decades are pharmaceutical contaminants due to the potential risks they pose to the environment and human health. An investigation on the photocatalytic degradation of four different model pharmaceutical contaminants: Tetracycline (TCT), Sulfamethoxazole (SMX), Chloroquine (CLQ), and Diclofenac (DCF) has been carried out using ZnO nanoparticles as the photocatalyst, and sunlight as the source of energy in a batch photocatalytic reactor. This process resulted in the degradation of about 51% for TCT, 65% for SMX, 61% for CLQ, and 55% for DCF within 30 min of solar irradiation. Complete degradation and COD reduction were achieved after a prolonged irradiation. The slow decay is attributed to the evolution of the intermediate compounds, which were identified using the liquid chromatography quadrupole time-of-flight mass spectrometry (LC-Q-TOF-MS) method. The possible intermediates formed were identified for each molecule (i.e., TCT having 6 products, SMX, having 4 products, DCF having 8 products and CLQ having 8 products), and the mechanism for each pollutant is proposed. The effect on distinct operational parameters, like catalyst loading, and pH, environmentally relevant parameters such as ionic effect, and multiple contaminants system were investigated. It was found that the anions such as Cl-, SO42-, CO32-, HCO3-, NO3-, F-, Br-, and I-both individually as well as in combination had no effect on the degradation except for SMX. For multiple component systems, when two pollutants are mixed, each pollutant affects the degradation of the other and in the case of CLQ/TCT system, CLQ inhibits the degradation of TCT drastically. The study demonstrates that ZnO is an effective and convenient option for photocatalytic decontamination of water sources contaminated with a variety of pharmaceutical contaminants.

The role of biochar and green compost amendments in the adsorption, leaching, and degradation of sulfamethoxazole in basic soil

The fate of the antibiotic sulfamethoxazole in amended soils remains unclear, moreover in basic soils. This work aimed to assess the adsorption, leaching, and biodegradation of sulfamethoxazole in unamended and biochar from holm oak pruning (BC)- and green compost from urban pruning (CG)-amended basic soil. Adsorption properties of the organic amendments and soil were determined by adsorption isotherms of sulfamethoxazole. The leachability of this antibiotic from unamended (Soil) and BC- (Soil + BC) and GC- (Soil + GC) amended soil was determined by leaching columns using water as solvent up to 250 mL. Finally, Soil, Soil + BC, and Soil + GC were spiked with sulfamethoxazole and incubated for 42 days. The degradation rate and microbial activity were periodically monitored. Adsorption isotherms showed poor adsorption of sulfamethoxazole in unamended basic soil. BC and CG showed good adsorption capacity. Soil + BC and Soil + GC increased the sulfamethoxazole adsorption capacity of the soil. The low sulfamethoxazole adsorption of Soil produced quick and intense sulfamethoxazole leaching. Soil + BC reduced the sulfamethoxazole leaching, unlike to Soil + GC which enhanced it concerning Soil. The pH of adsorption isotherms and leachates indicate that the anion of sulfamethoxazole was the major specie in unamended and amended soil. CG enhanced the microbial activity of the soil and promoted the degradability of sulfamethoxazole. In contrast, the high adsorption and low biostimulation effect of BC in soil reduced the degradation of sulfamethoxazole. The half-life of sulfamethoxazole was 2.6, 6.9, and 11.9 days for Soil + GC, Soil, and Soil + BC, respectively. This work shows the benefits and risks of two organic amendments, BC and GC, for the environmental fate of sulfamethoxazole. The different nature of the organic carbon of the amendments was responsible for the different effects on the soil.

Enhanced degradation of micropollutants by visible light photocatalysts with strong oxygen activation ability

Visible light photocatalysis is widely considered a sustainable approach to break down micropollutants without chemical addition. To promote the output of photogenerated carriers under visible light, a Z-scheme plasmonic photocatalyst Bi-CeO2/Ag0/BiO2 was designed and fabricated to activate dissolved oxygen in water for micropollutant degradation. The doped Bi not only improved the separation of electron-hole, but also narrowed the band gap of CeO2 to enhance its absorption of visible light. Notably, metallic silver (Ag0) works as an electronic transmission vehicle from Bi-CeO2 to BiO2 in a Z-scheme mechanism. Likewise, the surface plasmon resonance effect of Ag0 also enhanced the absorption of visible light. Furthermore, the Bi doping induced abundant surface oxygen vacancies on CeO2 for enhanced capability and selectivity towards O2 adsorption and activation, which favored the generation of O2•- by photogenerated electrons to degrade sulfamethoxazole, enrofloxacin, and bisphenol A. Theoretical calculation results also confirmed the O2•--driven degradation pathway for sulfamethoxazole. Therefore, the Z-scheme Bi-CeO2/Ag0/BiO2 not only extends the photocatalytic reactivity of CeO2-based catalysts to the visible light range, but also provides a chemical-free method to effectively degrade micropollutants.

Unveiling the mechanisms of peracetic acid activation by iron-rich sludge biochar for sulfamethoxazole degradation with wide adaptability

Advanced oxidation processes (AOPs) based on peracetic acid (PAA) has been extensively concerned for the degradation of organic pollutants. In this study, metallic iron-modified sludge biochar (Fe-SBC) was employed to activate PAA for the removal of sulfamethoxazole (SMX). The characterization results indicated that FeO and Fe2O3 were successfully loaded on the surface of the sludge biochar (SBC). Fe-SBC/PAA system achieved 92% SMX removal after 30 min. The pseudo-first-order kinetic reaction constant of the Fe-SBC/PAA system was 7.34 × 10-2 min-1, which was 2.4 times higher than the SBC/PAA system. The degradation of SMX was enhanced with increasing the Fe-SBC dosage and PAA concentration. Apart from Cl-, NO3- and SO42- had a negligible influence on the degradation of SMX. Quenching experiments and electron paramagnetic resonance (EPR) techniques identified the existence of reactive species, of which CH3C(O)OO•, 1O2, and O2•- were dominant reactive species in Fe-SBC/PAA system. The effect of different water matrices on the removal of SMX was investigated. The removal of SMX in tap water and lake water were 79% and 69%, respectively. Four possible pathways for the decay of SMX were presented according to the identification of oxidation products. In addition, following the ecological structure-activity relationship model (ECOSAR) procedure and the germination experiments with lettuce seeds to predict the toxicity of the intermediates. The acute and chronic ecotoxicity of SMX solution was dramatically diminished by processing with Fe-SBC/PAA system. In general, this study offered a prospective strategy for the degradation of organic pollutants.

Evaluation of the probable synergistic toxicity of selected potentiated antiretroviral and antibiotics on some aquatic biomarker organisms

Environmental effects of active pharmaceutical compounds (APCs) in the environment are not well characterized, hence the need for comprehensive evaluation. This study employed three bioassays using three organisms, namely, Allium cepa, Daphnia magna, and Salmonella typhimurium, in the ecotoxicity study of lone and a mixture of selected APCs, namely, lamivudine (L), an antiretroviral, and ciprofloxacin (C) and sulfamethoxazole (S), antibiotics, at a concentration range between 10 and 100 ppb, in order to evaluate the potential of the lone and ternary mixture to exert synergistic toxicity. Study results from exposure to lone APCs showed that the L, C, and S trio individually had fatal impacts on daphnids, with mortality rates of 100, 75, and 95%, respectively, after 48 h. Sulfamethoxazole showed a mutagenic tendency, with a mutation ratio (background/sample ratio) of 2.0. Lamivudine showed a lethal impact on the root length of A. cepa (p > 0.05, p = 3.60E-3). Further microscopic examination of the A. cepa root tip revealed chromosomal aberrations on exposure to each compound. The LCS-mix ecotoxicology bioassays indicated a synergistic effect on the daphnids, probably due to potentiation. Although the LCS mix had a cytotoxic effect (evidenced by the absence of bacteria colonies) on exposed TA 98 P450 Salmonella typhimurium strain, this effect was not observed in other bacterial strains. Microscopic examination of A. cepa exposed to the LCS-mix revealed an aberration in the mitotic stage of the cell. The impact of combination of the pharmaceuticals in aqueous ecosystems was greater than when exposed to the tested individual pharmaceutical compounds. Study result showed that these compounds have tendencies to pose a higher risk to exposed living entities when in combined/potentiated forms, and this could lead to distortion of the regular functioning of the ecosystem, particularly bacterial and other microbial populations that are listed among primary producers of the aquatic food web.

Green synthesis of zero valent iron using tannins to activate persulfate for sulfamethoxazole degradation

Majority zero-valent iron (ZVI) materials are prepared by reducing agents in liquid phase, resulting in the high environmental pollution and poor particle size distribution uniformity. Therefore, this study employed a green synthesis method to prepare ZVI. Tannins (TA) with phenolic hydroxyl groups that are characterized by strong reducing capacity were employed to synthesize ZVI (TA@ZVI). The dispersity and stability of ZVI was improved by TA, which inhibited the agglomeration of ZVI. Meanwhile, the specific surface area of TA@ZVI was higher than chemical prepared ZVI, increasing the reactive sites. The organic matter components enriched on TA could promote the adsorption of pollutants and complex with Fe(II/III) to enhance the reactivity of TA@ZVI. Also, the polyphenol structure in TA was oxidized to quinone, which facilitated electron transport. In order further test the performance of TA@ZVI, SMX was chosen as a target pollutant to study the oxidative degradation performance of TA@ZVI. SO4•- degraded about 16.4%-25.5% SMX and •OH degraded about 49.8%-63.9% SMX in the pH range of 4-6 while •OH played a dominant role in the neutral and alkaline conditions. Moreover, the presence of TA reduced Fe(III) to Fe(II) and promoted the release of Fe(II), providing a continuous source of •OH for the oxidative degradation of SMX. Besides, the conversion of Fe(II/III) was accelerated due to TA, which delayed the formation of passivation layer. Thus, TA enhanced the antioxidant capacity of ZVI. Generally, this study provided an environmental-friendly technology to synthesize and improve the reactivity of ZVI.

Mutual influence mechanism of nitrate and sulfamethoxazole on their biotransformation in poly (3-hydroxybutyrate-3-hydroxyvalerate) supported denitrification biofilter for a long-term operation

Nitrate and SMX both play a critical role in their biotransformation in biodegradable polymer-supported denitrification biofilters. However, the mutual influences of nitrate and SMX on their biotransformation for long-term operation remained obscure. Results showed SMX and nitrate had divergent effects on SMX removal. SMX removal rates was positively related with its loading rates, whereas they were negatively related to NLRs. The most abundant metabolite C10H14O3N3S (the reduced form of SMX moiety) from the N-O bond cleavage pathway by UHPLC-LTQ-Orbitrap-MS/MS and effluent TOC variations confirmed the presence of electron donor competition between nitrate and SMX. SMX less than 1000 μg/L had a negligible influence on denitrification performance. Denitrifiers such as Azospira and Denitratisoma were still enriched after chronic exposure, and nosZ/narG positively correlated with sul1/sul2 resistance genes, which were both responsible for the negligible influence of SMX. This work could guide the operational management of denitrification biofilters for simultaneous nitrate and antibiotics removal.

Facile synthesis of bimetallic ACF/CC@FeOCl-Cu composite cathode for efficient degradation of sulfamethoxazole at neutral pH by a flow-through heterogeneous electro-Fenton process

Flow-through heterogeneous electro-Fenton (FHEF) process shows a broad prospect for refractory organic pollutants removal. However, maintaining a long-term service life of higher catalytic cathode is crucial for the development of cathode materials, especially for iron-functionalized cathode operated under harsh conditions. In this study, a novel bimetallic CC@FeOCl-Cu composite was synthesized through one-step calcination, coupled with a series of microstructure characterization methodology, including XRD, SEM-EDS, XPS, and FTIR. The superior catalytic activity of CC@FeOCl-Cu could be ascribed to Fe-Cu synergy and better dispersion of FeOCl nanosheets. With the optimal Cu:Fe ratio of 1:60, the bifunctional ACF/CC@FeOCl-Cu cathode was employed in FHEF process, exhibiting an outstanding performance for sulfamethoxazole (SMX) removal over a wide pH range (3.0-9.0). Comparison of experimental results indicated that the ACF/CC@FeOCl-Cu-FHEF process showed higher performance than ACF/CC@FeOCl-FHEF and homogeneous EF processes. The average SMX removal efficiency was 98% and TOC removal efficiency was more than 57% even after 10 cycles. Radical quenching experiments and electron spin resonance test confirmed that •OH was the primary active species. More •OH was generated in the ACF/CC@FeOCl-Cu-FHEF process because the doping of Cu could enhance catalytic activity of cathode. In addition, the satisfactory performance could be observed in the ACF/CC@FeOCl-Cu-FHEF process for the treatment of real landfill leachate, indicating its potential for practical application in wastewater treatment.