In-situ texturing hollow carbon host anchored with Fe single atoms accelerating solid-phase redox for Li-Se batteries

Se-based cathodes have caught tremendous attention owing to their comparable volumetric capacity and better electronic conductivity to S cathodes. However, its low utilization ratio and sluggish redox kinetics due to the high reaction barrier of solid-phase transformation from Se to Li2Se limit its practical application. Herein, an in-situ texturing hollow carbon host by gas-solid interface reaction anchored with Fe single-atomic catalyst is designed and prepared for advanced Li-Se batteries. This Se host presents high pore volume of 1.49 cm3 g-1, Fe single atom content of 1.53 wt%, and its specific structure protects single-atomic catalyst from the destructive reaction environment, thus balancing catalytic activity and durability. After Se loading by reduction of H2SeO3, this homogenous Se-based cathode delivers a superior rate capacity of 431.3 mA h g-1 at 4C, and great discharge capacity of 301.8 mA h g-1 after 1000 cycles at 10C, with high Li-ion diffusion coefficient and capacitance-contributed ratio. The distribution of relaxation times analysis verifies solid-phase transformation mechanism of this cathode and density functional theory calculations confirm the adsorption and bidirectionally catalysis effect of Fe single-atomic catalyst. This work provides a new strategy to prepare high-efficient Se cathode associated with non-noble metal single atoms for high-performance Li-Se batteries.

Regulation of electron density redistribution for efficient alkaline hydrogen evolution reaction and overall water splitting

The rational design of morphology and heterogeneous interfaces for non-precious metal electrocatalysts is crucial in electrochemical water decomposition. In this paper, a bifunctional electrocatalyst (Ni/NiFe LDH), which coupling nickel with nickel-iron layer double hydroxide (NiFe LDH), is synthesized on carbon cloth. At current density of 10 mA cm-2, the Ni/NiFe LDH exhibits a low hydrogen evolution reaction (HER) overpotential of only 36 mV due to the accelerated electrolyte penetration, which is caused by superhydrophilic interface. Moreover, an alkaline electrolyzer is formed and provide a current density of 10 mA cm-2 with a voltage of only 1.49 V. It is confirmed by the density functional theory (DFT) that electron from the Ni layer is transferred to NiFe LDH layer, redistributing the local electron density around the heterogeneous phase interface. Thus, the Gibbs free energy for hydrogen adsorption is optimized. This work provides a promising strategy for the rational regulation of electrons at heterogeneous interfaces and the synthesis of flexible electrocatalysts.

Silver(I) complexes with voriconazole as promising anti-Candida agents

Recognizing that metal ions play an important role in modifying the pharmacological properties of known organic-based drugs, the present manuscript addresses the complexation of the antifungal agent voriconazole (vcz) with the biologically relevant silver(I) ion as a strategy for the development of new antimycotics. The synthesized silver(I) complexes with vcz were characterized by mass spectrometry, IR, UV-Vis and NMR spectroscopy and single-crystal X-ray diffraction analysis. The crystallographic results showed that complexes {[Ag(vcz)(H2O)]CH3SO3}n (1), {[Ag(vcz)2]BF4}n (2) and {[Ag(vcz)2]PF6}n (3) have polymeric structures in the solid state, in which silver(I) ions have a distorted tetrahedral geometry. On the other hand, DFT calculations revealed that the investigated silver(I) complexes 1-3 in DMSO exist as linear [Ag(vcz-N2)(vcz-N19)]+ (1a), [Ag(vcz-N2)(vcz-N4)]+ (2a) and [Ag(vcz-N4)2]+ (3a) species, respectively. The evaluated complexes showed an enhanced anti-Candida activity compared to the parent drug with minimal inhibitory concentration (MIC) values in the range of 0.02-1.05 μM. In comparison with vcz, the corresponding silver(I) complexes showed better activity in prevention hyphae and biofilm formation of C. albicans, indicating that they could be considered as promising agents against Candida that significantly inhibit its virulence. Also, these complexes are much better inhibitors of ergosterol synthesis in the cell membrane of C. albicans at the concentration of 0.5 × MIC. This is also confirmed by a molecular docking, which revealed that complexes 1a - 3a showed better inhibitory activity than vcz against the sterol 14α-demethylase enzyme cytochrome P450 (CYP51B), which plays a crucial role in the formation of ergosterol.

Predicting the propene stereoselectivity on transition metal catalysts: A daunting task for density functional theory

Thanks to recent developments in hardware and software, quantum chemical methods are increasingly used for interpreting the complex mechanisms underlying polymerization reaction by homogeneous catalysis. Unfortunately, the dimensions of even the smallest realistic models are too large to permit the use of state-of-the-art composite wave function methods. Under these circumstances, density functional theory still offers the best compromise between cost and accuracy. However, comprehensive benchmarks of different functionals are not yet available for this important research field. The main aim of the present paper is to fill this gap by performing an unbiased comparison of several density functionals and continuum solvent models for the stereo-control in the propylene polymerization on prototypical catalysts inducing different reaction mechanisms. While it was not possible to define a unique computational protocol providing the best results in all the situations, the B3PW91 functional in conjunction with D3 empirical dispersions and the solvent model density solvent model performs remarkably well for three out of the four investigated catalysts. Under such circumstances, it is recommended to compare the results delivered by different models when approaching additional classes of catalysts.

Construction of porous flower-like Ru-doped CoNiFe layered double hydroxide for supercapacitors and oxygen evolution reaction catalysts

In recent years, ternary layered double hydroxide (LDH) has become a research hotspot for electrode materials and oxygen evolution reaction (OER) catalyst due to the enhanced synergistic effect between individual elements. However, the application of LDH is greatly limited by its low electrical conductivity and the disadvantage that nanosheets tend to accumulate and mask the active sites. Herein, a novel Ru-doped CoNiFe - LDH was prepared via a facile hydrothermal method. According to the density functional theory (DFT) calculations, the doping of Ru element could improve electron state density and band gaps of LDH and consequently boosted the electrochemical reaction kinetics as well as electrical conductivity. Furthermore, introduction of Ru atom induced the formation of porous flower-like structures in nanosheets. Compared to CoNiFe - LDH (28.9 m2/g), Ru-doped CoNiFe - LDH performed larger specific surface area of 53.1 m2/g, resulting in more electrochemically active sites. In these case, Ru-doped CoNiFe - LDH demonstrated better energy storage performance of 176.0 mAh/g at 1 A/g compared to original CoNiFe - LDH (78.9 mAh/g at 1 A/g). Besides, the assembled Ru-doped CoNiFe - LDH//activated carbon (AC) device delivered a maximum energy density of 36.4 W h kg-1 at the power density of 740.3 W kg-1 and an outstanding cycle life (78.7 % after 10,000 cycles). Meanwhile, Ru-doped CoNiFe - LDH exhibited lower overpotential (339 mV at 50 mA cm-2) and Tafel slope (93.2 mV dec-1). Therefore, this work provided novel and valuable insights into the rational doping of Ru elements for the controlled synthesis of supercapacitor electrode materials and OER catalysts.

Application of atomic-scale mechanistic insights into carbon-catalyzed N2O reduction for kinetic modeling construction

To achieve the collaborative elimination of N2O and carbon of potent greenhouse pollutants from automotive mobile sources, a chemical kinetic model is developed to accurately track the heterogeneous process of carbon-catalyzed N2O reduction based on density functional theory, with experimental data used to validate the model's reliability. The influence of carbon structure, site density, and surface chemical properties on N2O catalytic reduction can be analyzed within this system. Results reveal that the free-edge site of carbon accurately describes the catalytic reduction process of N2O. Adsorption of N2O to carbon edges in O-down, N-down, or parallel orientations exhibits an exothermic process with energy barriers. The N2O with O-down reduction pathway predominates due to the limitations imposed by the unitary carbon site. As the number of active carbon atoms at carbon edges increases, the N2O reaction mode tends towards parallel and N-down pathways, resulting in a significant enhancement of N2O conversion rates and a reduction in catalytic temperatures, with the lowest achievable temperature being 300 K. Furthermore, the triplet carbon structure exhibits higher efficiency in N2O catalytic reduction compared to the singlet carbon structure, achieving a remarkable N2O conversion rate of 93.8 % within the typical temperature exhaust window of diesel engines. This study supplies a breakthrough for carbon materials as catalysts for achieving high N2O conversion rates at low cost, which is important for the collaborative catalytic elimination of N2O and carbon black pollutants.

Experimental and density functional theory investigation of surface-modified biopolymer for improved adsorption of mixtures of per- and polyfluoroalkyl substances in water

Glutaraldehyde (GTH) cross-linked chitosan (CTN) biopolymer-based and polyethyleneimine (PEI) functionalized (GTHCTNPEI) aerogels were proven promising for removing mixtures of long- and short chain per- and polyfluoroalkyl substances (PFAS) in water. In this study, to further improve the performance of the aerogel for short-chain PFAS and undecafluoro-2-methyl-3-oxahexanoic acid (GenX) removal, GTHCTNPEI aerogel chunks with an average size of 13.4 mm were turned into flakes with an average size of 9.1 mm. The GTHCTNPEI flakes achieved >99 % removal of all target PFAS, including long- and short-chain PFAS and >97 % for GenX after 10 h. In addition, the flakes can be regenerated and reused for at least four cycles. When added to tap water spiked with PFAS at initial concentrations of 30, 70, or 100 ng/L, the flakes removed almost 100 % of all tested PFAS. Mechanistic investigations using density functional theory (DFT) revealed strong stabilizing hydrophobic and electrostatic interactions between the aerogels and PFAS, with GTHCTNPEI to PFAS binding energies ranging between -24.0 - -30.1 kcal/mol for PFOA; -41.3 - -48.5 kcal/mol for PFOS; and -40.5 - -47.3 kcal/mol for PFBS. These results demonstrate the great potential of the flakes for removing PFAS from drinking water, surface water, and groundwater.

Indium(III)-Catalyzed Haloalkynylation Reaction of Alkynes

Green chemistry strives for sustainability at the molecular level and is gaining increasing relevance in the development of chemical reactions. The haloalkynylation reaction is a highly atom-economical C-C coupling reaction that was previously only achieved using transition metal catalysts. It enables the introduction of an alkyne unit and a halogen atom into the target molecule. Herein, we present a haloalkynylation reaction catalyzed by indium(III) halides. The use of indium(III) bromide as a catalyst leads exclusively to the cis addition products with yields up to 86 %. In addition, iodoacetylenes can be applied for the first time for the haloalkynylation reaction of internal alkynes which is an important step forward in the development of industrially relevant and sustainable catalysts. In contrast to gold catalysis, which proceeds via a similar mechanism, the use of alkyl-substituted haloacetylenes as reagents is also possible. Based on 13C labeling experiments and quantum chemical calculations, we postulate two possible mechanisms for the indium(III)-catalyzed haloalkynylation reactions.

Machine Learning-Accelerated High-Throughput Computational Screening: Unveiling Bimetallic Nanoparticles with Peroxidase-Like Activity

Bimetallic nanoparticles (NPs) with peroxidase-like (POD-like) activity play a crucial role in biosensing, disease treatment, environmental management, and other fields. However, their development is impeded by a vast range of tunable properties in components and structures, making the establishment of structure-effect relationships and the discovery of active materials challenging. Addressing this, we established robust scaling relationships by meticulously analyzing the catalytic reaction networks of pure metal NPs, which laid the volcano-shaped correlation between the activity and O* adsorption energy. Utilizing these relationships, we introduced an innovative and versatile descriptor of the NPs, which was then integrated into a machine learning-accelerated high-throughput computational workflow, significantly boosting the predictive accuracy for the POD-like activity of bimetallic NPs. Our methodological approach enabled the successful prediction of activities for 1260 bimetallic NPs, leading to the identification of several highly effective catalysts. Furthermore, we distilled several strategies for designing efficient bimetallic NPs based on our screening results.

Synthesis, molecular modelling, and antibacterial evaluation of new sulfonamide-dyes based pyrrole compounds

In this study, we synthesized new series of 5-oxo-2-phenyl-4-(arylsulfamoyl)sulphenyl) hydrazono)-4,5-dihydro-1H-pyrrole-3-carboxylate hybrids 4a-f with the goal of overcoming sulfonamide resistance and identifying novel therapeutic candidates by chemical changes. The chemical structures of the synthesized hybrids were established over the spectroscopic tools. The frontier molecular orbitals configuration and energetic possessions of the synthesized compounds were discovered utilizing DFT/B3LYP/6-311++ G** procedure. The 3D plots of both HOMO and LUMO showed comparable configuration of both HOMO and LUMO led to close values of their energies. Amongst the prepared analogues, the sulfonamide hybrids 4a-f, hybrid 4a presented potent inhibitory towards S. typhimurium with (IZD = 15 mm, MIC = 19.24 µg/mL) and significant inhibition with (IZD = 19 mm, MIC = 11.31 µg/mL) against E.coli in contrast to sulfonamide (Sulfamethoxazole) reference Whereas, hybrid 4d demonstrated potent inhibition with (IZD = 16 mm, MIC = 19.24 µg/mL) against S. typhimurium with enhanced inhibition against E. Coli, Additionally, the generated sulfonamide analogues'' molecular docking was estimated over (PDB: 3TZF and 6CLV) proteins. Analogue 4e had the highest documented binding score as soon as linked to the other analogues. The docking consequences were fitting and addressed with the antibacterial valuation.

Revealing the Mechanistic Features of an Electrosynthetic Catalytic Reaction and the Role of Redox Mediators through DFT Calculations and Microkinetic Modeling

Organic electrosynthesis is an emerging field that provides original selectivity while adding features of atom economy, sustainability, and selectivity. Electrosynthesis is often enhanced by redox mediators or electroauxiliaries. The mechanistic understanding of organic electrosynthesis is however often limited by the low lifetime of intermediates and its difficult detection. In this work, we report a computational analysis of the mechanism of an appealing reaction previously reported by Mei and co-workers which is catalyzed by copper and employs iodide as redox mediator. Our scheme combines DFT calculations with microkinetic modeling and covers both the reaction in solution and the electrodic steps. A detailed mechanistic scheme is obtained which reproduces well experimental data and opens perspectives for the general treatment of these processes.

Enhancement of Li/S Battery Performance by a Modified Reduced Graphene Oxide Carbon Host Decorated with MoO3

Electrochemical energy storage systems based on sulfur and lithium can theoretically delivery high energy with the further benefit of low cost. However, the working mechanism of this device involves the dissolutions of sulfur to high-molecular weight lithium polysulfide (LiPs with general formula Li2Sn, n>4) in the electrolyte during the discharge process. Therefore, the resulting migration of partially dissociated LiPs, by diffusion or under the effect of the electric field, to the lithium anode activates an internal shuttle mechanism, reduces the active material and in general leads to loss of performance and a reduced cycling stability. These drawbacks poses challenges to the commercialization of Li/S cells in the short term. In this study, we report on the decoration of reduced graphene oxide with MoO3 particles to enhance interactions with LiPs and retain sulfur at the cathode side. The combination of experiments and density functional theory calculation demonstrated improvements in binding interactions between the cathode and sulfur species, enhancing the cycling stability of the Li/S half-cell.

From Stilbenes to carbo-Stilbenes: an Encouraging Prospect

Beyond previously described carbo-naphthalene and carbo-biphenyl, a novel type of bis-carbo-benzenic molecules is envisaged from the stilbene parent. The synthesis, structure, spectroscopic and electrochemical properties of two such carbo-stilbenes are described at complementary experimental and computational DFT levels. In the selected targets, the bare skeletal carbo-mer of carbo-stilbene is decorated by 8 or 10 phenyl groups, 0 or 2 tert-butyl groups, and 2 n-octyl chains, the later substituents being introduced to compensate anticipated solubility issues. As in the parent stilbene series, isomers of the phenylated carbo-stilbenes are characterized. The cis- and trans-isomers are, however, formed in almost equal amounts and could not be separated by either chromatography or crystallization. Nevertheless, due to a slow interconversion at the NMR time scale (up to 55 °C) the 1H NMR signals of both isomers of the two carbo-stilbenes could be tentatively assigned. The calculated structure of the cis-isomer exhibits a helical shape, consistent with the observed magnetic shielding of phenyl p-CH nuclei residing inside the shielding cone of the facing C18 ring. The presence of the two isomers in solution also gives rise to quite broad UV-vis absorption spectra with main bands at ca 460, 560 and 710 nm, and a significant bathochromic shift for the decaphenylated carbo-stilbene vs the di-tert-butyl-octaphenylated counterpart. Square wave voltammograms do not show any resolution of the two isomers, giving a reversible reduction wave at -0.65 or -0.58 V/SCE, and an irreversible oxidation peak at 1.11 V/SCE, those values being classical for most carbo-benzene derivatives. Calculated NICS values (NICS(1)=-12.5±0.2 ppm) also indicate that the aromatic nature of the C18 rings is not markedly affected by the dialkynylbutatriene (DAB) connector between them.

Computational and Spectroscopic Studies on the Formation of Halogen-Bonded Complexes Between Tertiary Amines and CBr4 and Application in the Light-mediated Amino Acid Coupling

In recent years, halogen-bonded complexes (XBCs), in solution, have played a pivotal role in inducing photochemical organic reactions. In this work, we explore the ability of various tertiary amines to act as XB acceptors in the presence of the XB donor CBr4 by computational and spectroscopic studies. DFT studies clearly showcase the formation of XBCs between the studied tertiary amines and CBr4. Simultaneously, computational and experimental UV-Vis studies display intense red shifts that are consistent with charge transfer observed from tertiary amines to CBr4. A detailed NMR study revealed a clear chemical shift of the carbon carrying the bromine atoms upon mixing the XB acceptor with the donor, suggesting that this spectroscopic technique is indeed an experimental tool to identify the generation of XBCs. An application of the ability of such XBCs to activate a carboxylic acid under UVA irradiation or sunlight is presented for amino acid coupling. Among the various tertiary amines studied, the pair DABCO-CBr4 was found to work well for the photochemical amide bond formation. Direct infusion-HRMS studies allowed us to propose a general mechanism for the photochemical amino acid coupling in the presence of a tertiary amine and CBr4, initiated by the photoactivation of an XBC.

Oxidative Addition of E-H (E = C, N) Bonds to Transient Uranium(II) Centers

Two-electron oxidative addition is one of the most important elementary reactions for d-block transition metals but it is uncommon for f-block elements. Here, we report the first examples of intermolecular oxidative addition of E-H (E = C, N) bonds to uranium(II) centers. The transient U(II) species was formed in-situ by reducing a heterometallic cluster featuring U(IV)-Pd(0) bonds with potassium-graphite (KC8). Oxidative addition of C-H or N-H bonds to the U(II) centers was observed when this transient U(II) species was treated with benzene, carbazole or 1-adamantylamine, respectively. The U(II) centers could also react with tetracene, biphenylene or N2O, leading to the formation of arene reduced U(IV) products and uranyl(VI) species via two- or four-electron processes. This study demonstrates that the intermolecular two-electron oxidative addition reactions are viable for actinide elements.

Growth of Single Crystalline 2D Materials beyond Graphene on Non-metallic Substrates

The advent of 2D materials has ushered in the exploration of their synthesis, characterization and application. While plenty of 2D materials have been synthesized on various metallic substrates, interfacial interaction significantly affects their intrinsic electronic properties. Additionally, the complex transfer process presents further challenges. In this context, experimental efforts are devoted to the direct growth on technologically important semiconductor/insulator substrates. This review aims to uncover the effects of substrate on the growth of 2D materials. The focus is on non-metallic substrate used for epitaxial growth and how this highlights the necessity for phase engineering and advanced characterization at atomic scale. Special attention is paid to monoelemental 2D structures with topological properties. The conclusion is drawn through a discussion of the requirements for integrating 2D materials with current semiconductor-based technology and the unique properties of heterostructures based on 2D materials. Overall, this review describes how 2D materials can be fabricated directly on non-metallic substrates and the exploration of growth mechanism at atomic scale.

Theoretical investigations of structural, electronic, magnetic, and optical properties of group V (X = V, Nb, Ta) added CeO2-X materials for optoelectronic applications

CONTEXT

Depletion of natural resources, responsible for energy production, is a serious concern for researchers to develop alternate energy resources or materials. Scientists have proposed various energy materials which are based on semiconductors and their underlying physics. Cerium oxide (CeO2) is a versatile energy material which receives much attention owing to excellent photocatalytic, photonic, thermal stability, and optoelectronic applications. Even though CeO2 exhibited remarkable physical properties, but yet, they can be enhanced upon suitable doping. Focus on current research is to dope group V elements into CeO2 in order to enhance its electronic and optical response. The density of states (DOS) and band gaps of proposed materials are calculated, and significant improvement is noted after applying TB-mbj method. Optical absorption spectra of V/Nb/Ta-doped CeO2 show blueshift and decrease in reflectivity along with the presence of magnetism illustrate potential uses of these materials in future UV optoelectronics, spintronics, sensing, and energy harvesting devices.

METHODS

This research is based on computational work carried using Wien2k code where PBE-GGA approximation is used to approximate exchange and correlation potentials. Supercells of vanadium/niobium/tantalum-doped CeO2 are constructed, and spin-polarized density of states (DOS) along with optical constant are calculated. TB-mbj method is used to bring improvements in DOS and band gaps of proposed materials. Iterations are conducted using convergence criterion, and non-relativistic calculations are performed.

N-methyl Formamide Electrolyte Additive Enabling Highly Reversible Zn Anodes

Parasitic side reactions and dendrites formation hinder the application of aqueous zinc ion batteries due to inferior cycling life and low reversibility. Against this background, N-methyl formamide (NMF), a multi-function electrolyte additive is applied to enhance the electrochemical performance. Studied via advanced synchrotron radiation spectroscopy and DFT calculations, the NMF additive simultaneously modifies the Zn2+ solvation structure and ensures uniform zinc deposition, thus suppressing both parasitic side reactions and dendrite formation. More importantly, an ultralong cycling life of 3115 h in the Zn||Zn symmetric cell at a current density of 0.5 mA cm-2 is achieved with the NMF additive. Practically, the Zn||PANI full cell utilizing NMF electrolyte shows better rate and cycling performance compared to the pristine ZnSO4 aqueous electrolyte. This work provides useful insights for the development of high-performance aqueous metal batteries.

Efficient removal of per/polyfluoroalkyl substances from water using recyclable chitosan-coated covalent organic frameworks: Experimental and theoretical methods

Covalent organic frameworks (COFs) demonstrate remarkable potential for adsorbing per/polyfluoroalkyl substances (PFAS). Nevertheless, the challenge of recycling powdered COFs hampers their practical application in water treatment. In this research, a quaternary amine COF with inherent positive surface charge was synthesised to adsorb perfluorooctanoic acid (PFOA) via electrostatic interactions. The COF was then combined with chitosan (CS) through a simple dissolution-evaporation process, resulting in a composite gel material termed COF@CS. The findings indicated that the adsorption capacity of COF@CS significantly surpassed that of the original COF and CS. According to the Langmuir model, COF@CS achieved a maximum PFOA capacity of 2.8 mmol g-1 at pH 5. Furthermore, the adsorption rate increased significantly to 6.2 mmol g-1 h-1, compared to 5.9 mmol g-1 h-1 for COF and 3.4 mmol g-1 h-1 for CS. Notably, COF@CS exhibited excellent removal efficacy for ten other types of PFAS. Moreover, COF@CS could be successfully regenerated using a mixture of 70% ethanol and 1 wt% NaCl, and it exhibited stable reusability for up to five cycles. X-ray photoelectron spectroscopy (XPS), Fourier transform infrared spectroscopy (FTIR) characterisation, and theoretical calculations revealed that the quaternary amine functional group in COF served as the primary adsorption site in the composite gel material, while the protonated amino group on CS enhanced PFOA adsorption through electrostatic interaction. This study highlights the significant practical potential of COF@CS in the removal of PFAS from aqueous solution and environmental remediation.

Reaction of Pyrrolobenzothiazines with Schiff Bases and Carbodiimides: Approach to Angular 6/5/5/5-Tetracyclic Spiroheterocycles

1H-Pyrrole-2,3-diones, fused at [e]-side with a heterocycle, are suitable platforms for the synthesis of various angular polycyclic alkaloid-like spiroheterocycles. Recently discovered sulfur-containing [e]-fused 1H-pyrrole-2,3-diones (aroylpyrrolobenzothiazinetriones) tend to exhibit unusual reactivity. Based on these peculiar representatives of [e]-fused 1H-pyrrole-2,3-diones, we have developed an approach to an unprecedented 6/5/5/5-tetracyclic alkaloid-like spiroheterocyclic system of benzo[d]pyrrolo[3',4':2,3]pyrrolo[2,1-b]thiazole via their reaction with Schiff bases and carbodiimides. The experimental results have been supplemented with DFT computational studies. The synthesized alkaloid-like 6/5/5/5-tetracyclic compounds have been tested for their biotechnological potential as growth stimulants in the green algae Chlorella vulgaris.

Disclosing the intrinsic nature of efficient removal of antibiotics in N/S dual-doped porous carbon-based materials: The manipulation of internal electric field

N/S co-doping has emerged as a prevailing strategy for carbon-based adsorbents to facilitate the antibiotic removal efficiency. Nevertheless, the underlying interplay among N, S, and their adjacent vacancy defects remains overlooked. Herein, we present a novel in situ strategy for fabricating pyridinic-N dominated and S dual-doped porous carbon adsorbent with rich vacancy defects (VNSC). The experimental results revealed that N (acting as the electron donor) and S (acting as the electron acceptor) form an internal electric field (IEF), with a stronger IEF generated between pyridinic-N and S, while their adjacent vacancy defects activate carbon π electrons, thus enhancing the charge transfer of the IEF. Density functional theory (DFT) calculations further demonstrated that the rich charge transfer in the IEF facilitated the π-π electron donor-acceptor (EDA) interaction between VNSC and tetracycline (TC) as well as norfloxacin (NOR), and thus is the key to adsorption performance of VNSC. Consequently, VNSC exhibited high adsorption capacities toward TC (573.1 mg g-1) and NOR (517.0 mg g-1), and its potential for environmental applications was demonstrated by interference, environmentally relevant concentrations, fixed-bed column, and regeneration tests. This work discloses the natures of adsorption capacity for N/S dual-doped carbon-based materials for antibiotics.

N2 Functionalization via Molybdenum-Nitride Complex: Stepwise BH Bond Additions

Reactivity of (triphosphine)MoIV-nitrido complex generated by N2 splitting, toward boranes is reported. The simple adduct Mo≡N→BH3 is observed with BH3.SMe2 while 1,2 addition is evidenced with 9-BBN leading to H-Mo=NBR2. A second addition of BH3.SMe2 is facile and forms an unprecedented complex featuring two bridging H between two B and the Mo centers. Addition of PMe3 or BH3.SMe2 promotes reductive elimination and N-H bond formation. The full sequence of functionalization at Mo≡N obtained after N2 splitting is therefore evidenced in this work.

A Triazine Membrane for Sustainable Acquisition of Au(III) from Wastewater

The recovery of Au(III) from solution using adsorbents in the form of granules or powders is challenging due to issues such as instability during the recovery process or mass loss caused by small particle size. This study introduces a PEI-TCT/PVDF composite membrane designed to intercept and capture Au(III) in wastewater. Experimental results demonstrated that the PEI-TCT/PVDF membrane exhibits a broad pH range (1-8) and a high retention efficiency for Au(III) of 97.8%, with a maximum adsorption capacity of 294.5 mg/g. The mechanism of Au(III) adsorption on the PEI-TCT/PVDF membrane was mainly through electrostatic adsorption, which caused AuCl4- to aggregate on the surface of the membrane and gradually reduced to Au0 and Au+. Furthermore, the membrane can be entirely regenerated within 20 min and maintains its performance in subsequent adsorption cycles. This study highlights the potential of PEI-TCT/PVDF membranes for the recovery of precious Au(III).

Thermal Stability and Non-Linear Optical and Dielectric Properties of Lead-Free K0.5Bi0.5TiO3 Ceramics

Lead-free K0.5Bi0.5TiO3 (KBT) ceramics with high density (~5.36 g/cm3, 90% of X-ray density) and compositional purity (up to 90%) were synthesized using a solid-state reaction method. Strongly condensed KBT ceramics revealed homogenous local microstructures. TG/DSC (Thermogravimetry-differential scanning calorimetry) techniques characterized the thermal and structural stability of KBT. High mass stability (>0.4%) has proven no KBT thermal decomposition or other phase precipitation up to 1000 °C except for the co-existing K2Ti6O13 impurity. A strong influence of crystallites size and sintering conditions on improved dielectric and non-linear optical properties was reported. A significant increase (more than twice) in dielectric permittivity (εR), substantial for potential applications, was found in the KBT-24h specimen with extensive milling time. Moreover, it was observed that the second harmonic generation (λSHG = 532 nm) was activated at remarkably low fundamental beam intensity. Finally, spectroscopic experiments (Fourier transform Raman and far-infrared spectroscopy (FT-IR)) were supported by DFT (Density functional theory) calculations with a 2 × 2 × 2 supercell (P42mc symmetry and C4v point group). Moreover, the energy band gap was calculated (Eg = 2.46 eV), and a strong hybridization of the O-2p and Ti-3d orbitals at Eg explained the nature of band-gap transition (Γ → Γ).

Composite Nanomaterials Based on Polymethylmethacrylate Doped with Carbon Nanotubes and Nanoparticles: A Review

Composite polymer materials have high strength and lightness, which makes them attractive for use in a variety of structures and products. The present article contains an overview of modern works devoted to the production of composite materials based on poly(methyl methacrylate) (PMMA) with improved characteristics. The possibility of obtaining such materials can be a key area for creating more efficient and durable products in various industries. Various methods were considered to improve the characteristics of PMMA by doping the polymer matrix with carbon nanotubes (CNTs), graphite, nanohydroxyapatite particles, micro-zirconia nanoparticles, titanium dioxide, etc. The possibilities of using the obtained composite materials in various industries such as aviation, automotive, construction, medical and others are discussed. This article also presents the results of our own research on the mechanisms of interaction of PMMA with single-layer CNTs, leading to the creation of a composite polymer system "PMMA+CNT", achieved using the modern quantum chemical method DFT. This article presents a review of the recent research on the effect of CNTs on the mechanical and electrically conductive properties of nanocomposite materials. The outcomes of this study can be important for the development of science and technology in various fields, from fundamental chemistry to applied scientific research.

Antiangiogenic potential of phytochemicals from Clerodendrum inerme (L.) Gaertn investigated through in silico and quantum computational methods

Suppressing vascular endothelial growth factor (VEGF), its receptor (VEGFR2), and the VEGF/VEGFR2 signaling cascade system to inhibit angiogenesis has emerged as a possible cancer therapeutic target. The present work was designed to discover and evaluate bioactive phytochemicals from the Clerodendrum inerme (L.) Gaertn plant for their anti-angiogenic potential. Molecular docking of twenty-one phytochemicals against the VEGFR-2 (PDB ID: 3VHE) protein was performed, followed by ADMET profiling and molecular docking simulations. These investigations unveiled two hit compounds, cirsimaritin (- 12.29 kcal/mol) and salvigenin (- 12.14 kcal/mol), with the highest binding energy values when compared to the reference drug, Sorafenib (- 15.14 kcal/mol). Furthermore, only nine phytochemicals (cirsimaritin and salvigenin included) obeyed Lipinski's rule of five and passed ADMET filters. Molecular dynamics simulations run over 100 ns revealed that the protein-ligand complexes remained stable with minimal backbone fluctuations. The binding free energy values of cirsimaritin (- 52.35 kcal/mol) and salvigenin (- 55.89 kcal/mol), deciphered by MM-GBSA analyses, further corroborated the docking interactions. The HOMO-LUMO band energy gap (ΔE) was calculated using density-functional theory (DFT) and substantiated using density of state (DOS) spectra. The chemical reactivity analyses revealed that salvigenin exhibited the highest chemical softness value (6.384 eV), the lowest hardness value (0.07831 eV), and the lowest ΔE value (0.1566 eV), which implies salvigenin was less stable and chemically more reactive than cirsimaritin and sorafenib. These findings provide further evidence that cirsimaritin and salvigenin have the ability to prevent angiogenesis and the development of cancer. Nevertheless, more in vitro and in vivo confirmation is necessary.

Conformation Analysis and Stereodynamics of Symmetrically ortho-Disubstituted Carvacrol Derivatives

The design and synthesis of analogs of natural products can be a valuable source of medicinal preparations for the pharmaceutical industry. In the present study, the structural elucidation of eleven derivatives of 2,4-dihalogeno substituted synthetic analogues of the natural compound carvacrol was carried out by means of NMR experiments, and of another thirteen by DFT calculations. By selective NOE experiments and the irradiation of CH signals of the isopropyl group, individual conformers were assigned as syn and anti. By comparing GIAO/B3LYP/6-311++G(d,p)-calculated and experimentally measured vicinal 3JCH spin-spin constants, this assignment was confirmed. An unusual relationship is reported for proton-carbon vicinal couplings: 3JCH (180°) < 3JCH (0°). The conformational mobility of carvacrols was studied by 2D EXSY spectra. The application of homonuclear decoupling technique (HOBS) to these spectra simplifies the spectra, improves resolution without reducing the sensitivity, and allows a systematic examination of the rotational barrier of all compounds via their CH signals of the isopropyl group in a wider temperature interval. The rate constants of the isopropyl rotation between syn and anti conformers were determined and the corresponding energy barriers (14-17 kcal/mol) were calculated. DFT calculations of the energy barriers in carvacrol derivatives allowed the determination of the steric origin of the restricted isopropyl rotation. The barrier height depends on the size of the 2- and 4-position substituents, and is independent of the derivatization of the OH group.

Electride pureα-Zr: interstitial electrons induced type-II nodal line

Electrides have attracted significant attention in the fields of physics, materials science, and chemistry due to their distinctive electron properties characterized by weak nuclear binding. In this study, based on first-principles calculations and symmetry analysis, we report that the pure zirconium with alpha-phase (α-Zr) is expected to be the electrically neutral electride with topological nodal loop. Furthermore, the nodal loop located at thekz= 0 plane exhibits a clear drumhead-like surface state. The energy levels of the topological nodal loop can be regulated by applying uniaxial strain, resulting in the topological nodal loop being closer to the Fermi level. Remarkably, the work function of the electride Zr shows a significant anisotropy along the (001), (100), and (110) directions, particularly with a low work function of 3.14 eV along the (110) surface. Therefore, we predict thatα-Zr provides a promising platform for future research on topological electrides.

Mechanisms of Mn(V)-oxo to Mn(IV)-oxyl Conversion: From Closed-Cubane Photosystem II to Mn(V) Catalysts and the Role of the Entering Ligands

The low activation barrier for O-O coupling in the closed-cubane Oxygen-Evolving Centre (OEC) of Photosystem II (PSII) requires water coordination with the Mn4 'dangler' ion in the Mn(V)-oxo fragment. This coordination transforms the Mn(V)-oxo into a more reactive Mn4(IV)-oxyl species, enhancing O-O coupling. This study explains the mechanism behind this and indicates that in the most stable form of the OEC, the Mn4 fragment adopts a trigonal bipyramidal geometry but needs to transition to a square pyramidal form to be activated for O-O coupling. This transition stabilizes the Mn4 dxy orbital, enabling electron transfer from the oxo ligand to the dxy orbital, converting the oxo ligand into an oxyl species. The role of the water is to coordinate with the square pyramidal structure, reducing the energy gap between the oxo and oxyl forms, thereby lowering the activation energy for O-O coupling. This mechanism applies not only to the OEC system but also to other Mn(V)-based catalysts. For other catalysts, ligands like OH- stabilize the Mn(IV)-oxyl species better than water, improving catalyst activation for reactions like C-H bond activation. This study is the first to explain the Mn(V)-oxo to Mn(IV)-oxyl conversion, providing new foundation for Mn-based catalyst design.

Room Temperature Diels-Alder Reactions of 4-Vinylimidazoles

In the course of studying Diels-Alder reactions of 4-vinylimidazoles with N-phenylmaleimide, it was discovered that they engage in cycloaddition at room temperature to give high yields of the initial cycloadduct as a single stereoisomer. In certain cases, the product precipitated out of the reaction mixture and could be isolated by simple filtration, thereby avoiding issues with aromatization observed during chromatographic purification. Given these results, intramolecular variants using doubly activated dienophiles were also investigated at room temperature. Amides underwent cycloaddition at room temperature in modest yields, but the initial adducts were not isolable with Nimid-benzyl-protected systems. Attempts to extend these results to the corresponding esters and hydroxamate were less successful with these substrates only undergoing cycloaddition at elevated temperatures in lower yields. Density functional theory calculations were performed to evaluate the putative transition states for both the inter- and intramolecular variants to rationalize experimental observations.

Exploring long-range fluorine-carbon J-coupling for conformational analysis of deoxyfluorinated disaccharides: A combined computational and NMR study

In this study, we investigated the potential of long-range fluorine-carbon J-coupling for determining the structures of deoxyfluorinated disaccharides. Three disaccharides, previously synthesized as potential galectin inhibitors, exhibited through-space fluorine-carbon J-couplings. In our independent conformational analysis of these disaccharide derivatives, we employed a combination of density functional theory (DFT) calculations and nuclear magnetic resonance (NMR) experiments. By comparing the calculated nuclear shieldings with the experimental carbon chemical shifts, we were able to identify the most probable conformers for each compound. A model comprising fluoromethane and methane molecules was used to study the relationship between molecular arrangements and intermolecular through-space J-coupling. Our study demonstrates the important effect of internuclear distance and molecular orientation on the magnitude of fluorine-carbon coupling. The experimental values for the fluorine-carbon through-space couplings (TSCs) of the disaccharides corresponded with values calculated for the most probable conformers identified by the conformational analysis. These results unlock the broader application of fluorine-carbon TSCs as powerful tools for conformational analysis of flexible molecules, offering valuable insights for future structural investigations.

Theory-Guided Experimental Design of Covalent Triazine Frameworks for Efficient Photocatalytic Hydrogen Production

The high crystalline covalent triazine framework-1 (CTF-1), composed of alternating triazine and phenylene, has emerged as an efficient photocatalyst for solar-driven hydrogen evolution reaction (HER). However, it is of great challenge to further improve photocatalytic HER performance via increasing crystallinity due to its near-perfect crystallization. Herein, an alternative strategy of scaffold functionalization is employed to optimize the energy band structure of crystalline CTF-1 for boosting hydrogen-evolving activity. Guided by the computational predictions, versatile CTF-based polymer photocatalysts are prepared with different functional groups (OH, NH2, COOH) using binary polymerization for practical hydrogen production. Experiment evidence verifies that the introduction of a limited number of electron-donating groups is sufficient to maintain high crystallinity in CTF, modulate the band structure, broaden visible light absorption, and consequently enhance its photophysical properties. Notably, the functionalization with OH exhibits the most positive effect on CTF-1, delivering a photocatalytic activity with a hydrogen-producing rate exceeding 100 µmol h-1.

Strategic design, theoretical insights, synthesis, and unveiling antioxidant potential in a novel ascorbic acid analog

CONTEXT

In this study, we investigated the antioxidant potential of a novel ascorbic acid analog, DsD, assessing its interactions with the methylperoxyl (CH3OO·) radical in aqueous and lipid environments. Our focus was on understanding the acid-base equilibrium and how pH affects DsD's primary reaction mechanisms. Our findings indicate a marked preference for hydrogen atom transfer in lipid media, contrasting with sequential proton loss electron transfer (SPLET) in aqueous solutions. Remarkably, DsD's radical scavenging activity significantly outperforms ascorbic acid, being 4.05 and 9469.70 times more potent in polar and lipid contexts, respectively. This suggests DsD's superior efficacy as an antioxidant, potentially offering enhanced protection in biological systems. Additionally, we have demonstrated DsD's synthetic feasibility through a straightforward condensation reaction between ascorbic acid and 1,2-diaminoethane, followed by comprehensive physicochemical and spectroscopic characterization.

METHODS

All computational analyses in this study were conducted using the Gaussian 09 software suite, employing the M05-2X functional and the 6-31 + G(d) basis set. Enthalpy calculations were executed under standard conditions (298.15 K and 1 atm), incorporating appropriate thermodynamic corrections. Rate constants were evaluated using transition state theory (TST), and the overall assessment of radical scavenging activity was guided by the Quantum Mechanics-based Test for Overall Radical Scavenging Activity (QMORSA) protocol.

Maltodextrin as a Commercial-Grade Electrolyte Additive Against Dendrite Formation and Side Reactions for Aqueous Zinc-Ion Batteries

Aqueous zinc-ion batteries (AZIBs) directly using zinc metal anodes are promising candidates for grid-scale energy storage systems due to their intrinsic high theoretical capacity, high safety, and environmental friendliness. However, the uncontrolled dendrite growth and water-triggered side reactions seriously plague its practical application. Herein, a cost-effective and green additive, maltodextrin (MD) is presented, to simultaneously guide the smooth Zn deposition and inhibit the occurrence of water-related side reactions. Combing experimental characterizations and theoretical calculations shows that the MD molecules could reconstruct the Helmholtz plane, induces a preferential growth of zinc along the (002) plane, and the optimized regulation of the Zn2+ diffusion path and deposition location also results in the formation of fine-grained Zn deposition layers, thereby inhibiting dendrite growth. In addition, MD molecules readily adsorb to the zinc anode surface, which isolates water molecules from direct contact with the zinc metal, reducing hydrogen precipitation reactions and inhibiting the formation of by-products. Consequently, the Zn||Zn symmetric cell with MD achieves ultra-long stable cycles of up to 5430 h at 1 mA cm-2 and 1 mA h cm-2, and the Cu||Zn asymmetric cell can stable cycle 1000 cycles with an average coulomb efficiency of 99.78%.

Solid-State Synthesis of B←N Adducts by the Amine-Facilitated Trimerization of the Phenylboronic Acid

Stable boroxine-amine adducts comprising dative B←N bond(s) were prepared by mechanochemically-induced reactions of phenylboronic acid (PBA) and amines (pyridine, DMAP, 1H-pyrazole, piperidine, DABCO, hexamethylenetetramine, or 4,4'-bipyridine). In-situ Raman monitoring, ex-situ PXRD and DFT calculations were used for product identification. Stoichiometry of the product (3 : 1, 3 : 2 or 6 : 1 adduct) was controlled by the amine structure and the molar ratio of the reactants. The 1 : 2 H-bonded assembly of PBA and 4,4'-bipyridine (bpy) was confirmed as an intermediate in the adduct formation for bpy. Competitive binding experiments indicated that the exchange of the amines in the 3 : 1 adducts follows the computed adduct stabilities that increase with the amine basicity. Following the DFT prediction, the first adduct with two different amines, DMAP and pip, bound to one boroxine moiety was isolated and structurally characterized. Results show that calculations can be used to predict possible and preferred product(s) and their spectral characteristics.

Dynamics of Coordinated Phosphonate Group Directly Observed by 17O-NMR in Lanthanide(III) Complexes of a Mono(ethyl phosphonate) DOTA Analogue

Biological phosphates can coordinate metal ions and their complexes are common in living systems. Dynamics of mutual oxygen atom exchange in the tetrahedral group in complexes has not been investigated. Here, we present a direct experimental proof of the exchange ("phosphonate rotation") in model Ln(III) complexes of monophosphonate H4dota analogue which alters phosphorus atom chirality of coordinated phosphonate monoester. Combination of macrocycle-based isomerism with P-based chirality leads to several diastereoisomers. The (non)-coordinated oxygens were distinguished through 17O-labelled phosphonate group and their mutual exchange was followed by various NMR techniques and DFT calculations. The process is sterically demanding and occurs through bulky bidentate (k2-PO2)- coordination. It was observed on complexes of large Ln(III) ions in twisted-square antiprism diastereoisomers. The process energy increases for smaller Ln(III) ions (298ΔG‡(exp./DFT) = 51.8/52.1 and 61.0 / 71.5 kJ mol-1 for La(III) and Eu(III), respectively). These results are helpful in design of such complexes for MRI and protein paramagnetic NMR probes. It demonstrates usefulness of 17O NMR to study solution dynamics in complexes involving phosphorus acid derivatives. The results may inspire use of this method to study dynamics of phosphoric acid derivatives (as e.g. phosphorus acid-based inhibitors of metalloenzymes) in different areas of chemistry.

On the Existence of Pnictogen Bonding Interactions in As(III) S-Adenosylmethionine Methyltransferase Enzymes

As(III) S-adenosylmethionine methyltransferases, pivotal enzymes in arsenic metabolism, facilitate the methylation of arsenic up to three times. This process predominantly yields trivalent mono- and dimethylarsenite, with trimethylarsine forming in smaller amounts. While this enzyme acts as a detoxifier in microbial systems by altering As(III), in humans, it paradoxically generates more toxic and potentially carcinogenic methylated arsenic species. The strong affinity of As(III) for cysteine residues, forming As(III)-thiolate bonds, is exploited in medical treatments, notably in arsenic trioxide (Trisenox®), an FDA-approved drug for leukemia. The effectiveness of this drug is partly due to its interaction with cysteine residues, leading to the breakdown of key oncogenic fusion proteins. In this study, we extend the understanding of As(III)'s binding mechanisms, showing that, in addition to As(III)-S covalent bonds, noncovalent O⋅⋅⋅As pnictogen bonding plays a vital role. This interaction significantly contributes to the structural stability of the As(III) complexes. Our crystallographic analysis using the PDB database of As(III) S-adenosylmethionine methyltransferases, augmented by comprehensive theoretical studies including molecular electrostatic potential (MEP), quantum theory of atoms in molecules (QTAIM), and natural bond orbital (NBO) analysis, emphasizes the critical role of pnictogen bonding in these systems. We also undertake a detailed evaluation of the energy characteristics of these pnictogen bonds using various theoretical models. To our knowledge, this is the first time pnictogen bonds in As(III) derivatives have been reported in biological systems, marking a significant advancement in our understanding of arsenic's molecular interactions.

MOF-derived xPd-NPs@ZnO porous nanocomposites for ultrasensitive ppb-level gas detection with photoexcitation: Design, diverse-scenario characterization, and mechanism

Metal-organic frameworks (MOFs) have been regarded as a potential candidate with great application prospects in the field of gas sensing. Although plenty of previous efforts have been made to improve the sensitivity of MOF-based nanocomposites, it is still a great challenge to realize ultrafast and high selectivity to typical flammable gases in a wide range. Herein, porous xPd-NPs@ZnO were prepared by optimized heat treatment, which maintained the controllable morphology and high specific surface area of 471.08 m2g-1. The coupling effects of photoexcitation and thermal excitation on the gas-sensing properties of nanocomposites were systematically studied. An ultrafast high response of 88.37 % towards 200 ppm H2 was realized within 1.2 s by 5.0Pd-NPs@ZnO under UV photoexcitation. All xPd-NPs@ZnO exhibited favorable linearity over an extremely wide range (0.2-4000 ppm H2) of experimental tests, indicating the great potential in quantitative detection. The photoexcited carriers enabled the nanocomposites a considerable response at lower operating temperatures, which made diverse applications of the sensors. The mechanisms of high sensing performances and the photoexcitation enhancement were systematically explained by DFT calculations. This work provides a solid experimental foundation and theoretical basis for the design of controllable porous materials and novel photoexcited gas detection.

Ultrafast synthesis of efficient TS-PtCoCu/CNTs composite with high feed-to-product conversion rate by Joule heating for electrocatalytic oxidation of ethanol

Due to the challenges involved in achieving high metal load, uniform metal dispersion and nanosized metal particles simultaneously, it is difficult to develop a simple protocol for the rapid and efficient synthesis of Pt-based composites for electrocatalytic ethanol oxidation reaction (EOR). In this study, a facile ultrafast thermal shock strategy via Joule heating was applied to fabricate a series of PtCoCu ternary nanoalloys decorated carbon nanotube composites (TS-PtCoCu/CNTs), without the need for a reducing agent or surfactant. The TS-PtCoCu/CNTs with optimal Pt content (∼15 %) exhibited excellent EOR activity, with mass and specific activity of 3.58 A mgPt-1 and 5.79 mA cm-2, respectively, which are 3.8 and 13.5 times higher than those of Pt/C. Compared with the control prepared through the traditional furnace annealing, the catalyst also showed excellent activity and stability. DFT calculations revealed that the TS-PtCoCu/CNTs possesses a downshifted d-band center, weakened CO adsorption and higher OH affinity compared with monometallic Pt, all of which lead to the preferred C1 pathway for EOR. This study demonstrates an ultrafast construction of a highly efficient Pt-Co-Cu ternary catalyst for EOR. Additionally, it provides insights into the reaction mechanism based on structural characterization, electrochemical characterization, and theoretical calculations.

Enantioselective and Regiodivergent Synthesis of Propargyl- and Allenylsilanes through Catalytic Propargylic C-H Deprotonation

We report a highly enantioselective intermolecular C-H bond silylation catalyzed by a phosphoramidite-ligated iridium catalyst. Under reagent-controlled protocols, propargylsilanes resulting from C(sp3)-H functionalization, as well the regioisomeric and synthetically versatile allenylsilanes, could be obtained with excellent levels of enantioselectivity and good to excellent control of propargyl/allenyl selectivity. In the case of unsymmetrical dialkyl acetylenes, good to excellent selectivity for functionalization at the less-hindered site was also observed. A variety of electrophilic silyl sources (R3SiOTf and R3SiNTf2), either commercial or in situ-generated, were used as the silylation reagents, and a broad range of simple and functionalized alkynes, including aryl alkyl acetylenes, dialkyl acetylenes, 1,3-enynes, and drug derivatives were successfully employed as substrates. Detailed mechanistic experiments and DFT calculations suggest that an η3-propargyl/allenyl Ir intermediate is generated upon π-complexation-assisted deprotonation and undergoes outer-sphere attack by the electrophilic silylating reagent to give propargylic silanes, with the latter step identified as the enantiodetermining step.

Schiff base functionalized dialdehyde starch for enhanced removal of Cu (II): Preparation, performances, DFT calculations

Dialdehyde starch modified by 2-hydrazinopyridine (HYD-DAS) based on the reaction of dialdehyde starch (DAS) and 2-hydrazinopyridine was synthesized and characterized by FT-IR spectra, element analysis and SEM. HYD-DAS can efficiently adsorb Cu (II) ion to demonstrate visual color changes from yellow to dark brown in aqueous solutions. The influence on HYD-DAS to Cu (II) adsorption including pH value of solution, isotherm, kinetics, thermodynamics and possible mechanism had also been examined. Batch experiments indicate that HYD-DAS's to Cu (II) adsorption reaches equilibrium within 250 min, and its adsorption capacity and rate are 195.75 mg/g and 98.63 %, respectively. Moreover, HYD-DAS to Cu (II) adsorption remains robust and underscoring after five cycles to exhibit good selectivity and reusability. Kinetics studies suggest the absorption process follows a quasi-second-order with isotherms aligning to the Langmuir monolayer model, and thermodynamics reveals that it is a spontaneous endothermic nature of adsorption. Based on the analyses of XPS and DFT calculations, a possible mechanism for HYD-DAS to Cu (II) adsorption is that Cu (II) combined with nitrogen atoms from Schiff base and hydrazine pyridine ring in HYD-DAS.

Vacancy-Enhanced Sb-N4 Sites for the Oxygen Reduction Reaction and Zn-Air Battery

With the advantages of a Fenton-inactive characteristic and unique p electrons that can hybridize with O2 molecules, p-block metal-based single-atom catalysts (SACs) for the oxygen reduction reaction (ORR) have tremendous potential. Nevertheless, their undesirable intrinsic activity caused by the closed d10 electronic configuration remains a major challenge. Herein, an Sb-based SAC featuring carbon vacancy-enhanced Sb-N4 active centers, corroborated by the results of high-angle annular dark-field scanning transmission electron microscopy and X-ray absorption fine structure, has been developed for an incredibly effective ORR. The obtained SbSA-N-C demonstrates a positive half-wave potential of 0.905 V and excellent structural stability in alkaline environments. Density functional theory calculations reveal that the carbon vacancies weaken the adsorption between Sb atoms and the OH* intermediate, thus promoting the ORR performance. Practically, the SbSA-N-C-based Zn-air batteries achieve impressive outcomes, such as a high power density of 181 mW cm-2, showing great potential in real-world applications.

Design of New Schiff Bases and Their Heavy Metal Ion Complexes for Environmental Applications: A Molecular Dynamics and Density Function Theory Study

Schiff bases (SBs) are important ligands in coordination chemistry due to their unique structural properties. Their ability to form complexes with metal ions has been exploited for the environmental detection of emerging water contaminants. In this work, we evaluated the complexation ability of three newly proposed SBs, 1-3, by complete conformational analysis, using a combination of Molecular Dynamics and Density Functional Theory studies, to understand their ability to coordinate toxic heavy metal (HMs) ions. From this study, it emerges that all the ligands present geometries that make them suitable to complex HMs through the N-imino moieties or, in the case of 3, with the support of the oxygen atoms of the ethylene diether chain. In particular, this ligand shows the most promising coordination behavior, particularly with Pb2+.

Electrochemical Dearomatizing Methoxylation of Phenols and Naphthols: Synthetic and Computational Studies

The electrochemical oxidative dearomatizing methoxylation of phenols and naphthols was developed. It provides an alternative route for the preparation of methoxycyclohexadienones, important and versatile synthetic intermediates, that eliminates the need for stoichiometric high-energy chemical oxidants and generates hydrogen as a sole by-product. The reaction proceeds in a simple constant current mode, in an undivided cell, and it employs standardized instrumentation. A collection of methoxycyclohexadienones derived from various 2,4,6-tri-substituted phenols and 1-substituted-2-naphthols was obtained in moderate to excellent yields. These include a complex derivative of estrone, as well as methoxylated dearomatized 1,1'-bi-2-naphthols (BINOLs). The mechanism of the reaction was subject to profound investigations using density functional theory calculations. In particular, the reactivity of two key intermediates, phenoxyl radical and phenoxenium ion, was carefully examined. The obtained results shed light on the pathway leading to the desired product and rationalize experimentally observed selectivities regarding a side benzylic methoxylation and the preference for the functionalization at the para over the ortho position. They also uncover the structure-selectivity relationship, inversely correlating the steric bulk of the substrate with its propensity to undergo the side-reaction. Moreover, the loss of stereochemical information from enantiopure BINOL substrates during the reaction is rationalized by the computations.

Molecular Dynamics of Steroidal Rotors Probed by Theoretical, Spectroscopic and Dielectric Methods

Our study focuses on molecular rotors with fast-moving rotators and their potential applications in the development of new amphidynamic crystals. Steroidal molecular rotors with a dipolar fluorine-substituted phenyl group as the rotator were synthesized and characterized. Three different rotors were investigated with varying numbers of fluorine atoms. A comprehensive analysis was performed using vibrational spectroscopy (Raman, FT-IR), electronic circular dichroism (ECD), and dielectric response to understand the behavior of the investigated model rotors. The results were supported by theoretical calculations using Density Functional Theory (DFT) methods. The angle-dependent polarized Raman spectra confirmed the crystallinity of the samples. Nearly frequency and temperature-independent permittivity suggest low-frequency librational motion of stators. An in-depth analysis of ECD spectra revealed high conformational flexibility in solution, resulting in low ECD effects, while in the solid-state with restricted rotation, significant ECD effects were observed. These findings shed light on the conformational behavior and potential applications of the studied steroidal molecular rotors.

Electrochemical Nitrogen Reduction to Ammonia at Ambient Condition on the (111) Facets of Transition Metal Carbonitrides

We conducted Density Functional Theory calculations to investigate a class of materials with the goal of enabling nitrogen activation and electrochemical ammonia production under ambient conditions. The source of protons at the anode could originate from either water splitting or H2, but our specific focus was on the cathode reaction, where nitrogen is reduced into ammonia. We examined the conventional associative mechanism, dissociative mechanism, and Mars-van Krevelen mechanism on the (111) facets of the NaCl-type structure found in early transition metal carbonitrides, including Ti, V, Cr, Zr, Nb, Mo, Hf, Ta, Sc, Y, and W. We explored the catalytic activity by calculating the free energy of all intermediates along the reaction pathway and constructing free energy diagrams to identify the steps that determine the reaction's feasibility. Additionally, we closely examined the potential for catalyst poisoning within the electrochemical environment, considering the bias required to drive the reaction. Furthermore, we assessed the likelihood of catalyst decomposition and the potential for catalyst regeneration among the most intriguing carbonitrides. Our findings revealed that the only carbonitride catalyst considered here exhibiting both activity and stability, capable of self-regeneration and nitrogen-to-ammonia activation, is NbCN with a low potential-determining step energy of 0.58 eV. This material can facilitate ammonia formation via a mixed associative-MvK mechanism. In contrast, other carbonitrides of this crystallographic orientation are likely to undergo decomposition, reverting to their parent metals under operational conditions.

Puzzling Structure of the Key Intermediates in Gold(I)-catalyzed Cyclization Reactions of Enynes and Allenenes

We identify the dominant structures of the intermediates of gold(I)-catalyzed cyclizations of 1,5-enynes and 1,5-allenenes through computational analysis as gold(I) cyclopropylcarbenes, endocyclic vinylgold complexes and previously unreported non-classical carbocationic minima. In contrast to 1,6-enynes, the exocyclic carbocations are found to be less stable. Cyclopropylcarbene structures are consistently favoured as the most stable intermediates for all studied substitution patterns. We validate the computational methods used by using DLPNO-CCSD(T) energies as a benchmark, indicating that the B3LYP-D3 and M06-D3 functionals are most accurate for energy determination, while NPA charges are mostly insensitive to functional. The evolution of a 1,6-enyne in a single-cleavage or double-cleavage rearrangement is attributed to the barrierless evolution of a common cyclopropyl-gold(I) carbocation non-stationary geometry. Our findings provide insights into reaction pathways and substrate dependence of the cycloisomerization processes.

Unveiling the antioxidant superiority of α-tocopherol: Implications for vitamin E nomenclature and classification

Since the discovery of tocopherols a century ago, α-tocopherol has been distinguished for its unique biological functions. In this study, we aim to elucidate the unique characteristics of α-tocopherol from a chemical perspective. Utilizing density functional theory (DFT) calculations, we evaluated the thermodynamic and kinetic properties of tocopherols, tocotrienols and their oxidation products. Our findings highlight the superior thermodynamic and kinetic properties of α-tocopherol. Although tocopherol substrates generally exhibit similar reactivities, α-tocopherol is distinguished by a larger gap between the highest occupied molecular orbital (HOMO) and lowest unoccupied molecular orbital (LUMO) in intermediates, indicating a potential for greater energy release and favoring reaction progression. Moreover, α-tocopherol shows enhanced efficiency in quenching radical intermediates, especially when combined with vitamin C. All these dates provide valuable support for the naming of vitamin E.

NMR crystallography of amino acids

The development of NMR crystallography methods requires a reliable database of chemical shifts measured for systems with known crystal structure. We measured and assigned carbon and hydrogen chemical shifts of twenty solid natural amino acids of known polymorphic structure, meticulously determined using powder X-ray diffraction. We then correlated the experimental data with DFT-calculated isotropic shieldings. The small size of the unit cell of most amino acids allowed for advanced computations using various families of DFT functionals, including generalized gradient approximation (GGA), meta-GGA and hybrid DFT functionals. We tested several combinations of functionals for geometry optimizations and NMR calculations. For carbon shieldings, the widely used GGA functional PBE performed very well, although an improvement could be achieved by adding shielding corrections calculated for isolated molecules using a hybrid functional. For hydrogen nuclei, we observed the best performance for NMR calculations carried out with structures optimized at the hybrid DFT level. The high fidelity of the calculations made it possible to assign additional signals that could not be assigned based on experiments alone, for example signals of two non-equivalent molecules in the unit cell of some of the amino acids.

Resonant Raman Scattering Study of Strain and Defects in Chemical Vapor Deposition Grown MoS2 Monolayers

The development of bottom-up synthesis routes for semiconducting transition metal dichalcogenides (TMDs) and the assessment of their defects are of paramount importance to achieve their applications. TMD monolayers grown by chemical vapor deposition (CVD) can be subjected to significant strain and, here, Raman and photoluminescence spectroscopies are combined to characterize strain in over one hundred MoS2 monolayer samples grown by CVD. The frequency changes of phonons as a function of strain are analyzed, and used to extract the Grüneisen parameter of both zone-center and edge phonons. Additionally, the intensity of the defect-induced longitudinal acoustic (LA) and transverse acoustic (TA) Raman bands are discussed in relation to strain and electronic doping. The experimental mode-Grüneisen parameters obtained are compared with those calculated by density functional theory (DFT), to better characterize the type of strain and its resulting effects on Grüneisen parameters. The findings indicate that the use of Raman spectra to determine defect densities in 2D MoS2 must be always conducted considering strain effects. To the best of the authors' knowledge, this work constitutes the first report on double resonance Raman processes studied as a function of strain in 2D-MoS2. The new approach to obtain the Grüneisen parameter from zone-edge phonons in MoS2 can also be extended to other 2D semiconducting TMDs.