Three-dimensional printing technique aids screw insertion into the sustentaculum tali of the internal fixation of intra-articular calcaneal fractures

INTRODUCTION

Treating complex calcaneus fractures remains challenging. This study evaluated the influence of 3D printing and simulation on precision screw insertion into the calcaneus sustentaculum tali (ST).

HYPOTHESIS

3D printing and simulation improve the treatment for calcaneal fracture.

PATIENTS AND METHODS

This retrospective cohort study included 85 patients admitted with 93 Sanders type II-IV intra-articular fractures from January 2015 to June 2020. Multi-slice computed tomography (MSCT) images were used in the conventional group, and MSCT data were used to construct a 3D model of the calcaneus to simulate screw insertion and verify parameter accuracy in the 3D group.

RESULTS

The designed parameters (upward and backward oblique angles and screw-path length) were similar to the actual values in the 3D group (p=0.428,0.287,0.585) but not in the conventional group (p=0.01,0.002,0.023). The Maryland foot functional score, accuracy rate, and average screw number were higher and operative time was shorter in the 3D group (p=0.005,0.007,0.000,0.000).

DISCUSSION

Preoperative simulation using the 3D printing model helped guide the screws into the ST more accurately, lending better-quality treatment for Sanders type II-IV calcaneal fractures.

LEVEL OF PROOF

III; Retrospective case-control study.

Arthroscopic assisted percutaneous fixation in ankle pilon fracture: A case report

INTRODUCTION

Results of operative fixation for ankle fractures had been suboptimal, with cases of posttraumatic osteoarthritis occurring following the surgeries. Intra-articular injuries have been suggested as the cause of this problem. This case report aims to present an ankle pilon fracture Ruedi Allgower type II case treated with percutaneous fixation and arthroscopy evaluation.

PRESENTATION OF CASE

Female, 17 years old, complained of pain and swelling at the right ankle. The physical examination revealed swelling, deformity, tenderness, and limited range of motion at the right ankle. The radiological examination showed a Ruedi Allgower type II pilon fracture with right ankle dislocation. The patient underwent closed reduction, arthroscopy to evaluate her right ankle and percutaneous internal fixation. The post-surgery evaluation showed a stable ankle.

DISCUSSION

Patients undergoing ankle fracture surgery may benefit from ankle arthroscopy because it may increase visualization of articular reductions, assess and repair cartilage and ligament damage, remove loose bodies, decrease soft tissue exposure, preservative vascularity, and evaluate syndesmosis. Moreover, rapid arthroscopic evaluation has a low complication rate. The ability of arthroscopy to improve syndesmotic instability diagnosis suggests that arthroscopy may play a significant role in managing ankle fractures.

CONCLUSION

Arthroscopy-assisted internal fixation provides more benefits and information as a single case report, and more studies are warranted; regarding patients' intra-articular injuries, preventing future complications, such as posttraumatic osteoarthritis.

Biomechanics of internal fixation in Hoffa fractures - A comparison of four different constructs

OBJECTIVE

Compare the biomechanical effectiveness of four different bone-implant constructs in preventing fracture displacement under axial loading.

METHODS

Twenty artificial femora had a standardized coronally oriented fracture of the lateral femoral condyle, representing a Hoffa fracture classified as a Letenneur type I. Four different fixation constructs were applied to the synthetic bones for biomechanical testing. The constructs consisted of a posterolateral (PL) buttressing locking plate in conjunction with two cannulated lag screws inserted from posterior to anterior (PA) - Group 1; Two cannulated screws inserted from anterior to posterior (AP) without plating- Group 2; A posterolateral (PL) buttressing locking plate in isolation - Group 3; and a combination of two lag screws from anterior to posterior (AP) in addition to a horizontal one-third tubular locking plate - Group 4. An axial load was applied to the fracture site with a constant displacement speed of 20 mm/min, and the test was interrupted when a secondary displacement was detected determining a fixation failure. We recorded the maximum applied force and the maximum fracture displacement values.

RESULTS

Group 1 demonstrated the highest overall bone-implant axial stiffness with the lowest secondary displacement under loading. Groups 3 and 4 showed equivalent mechanical behavior. Group 2 presented the lowest mechanical stiffness to axial loading. The combination of the one-third tubular locking plate with anterior-to-posterior lag screws (Group 4) resulted in 302 % increase in fixation stiffness when compared to anterior-to-posterior lag screws only (Group 2).

CONCLUSIONS

This study confirms the mechanical superiority of having a plate applied parallel to the main fracture plane in the setting of coronally oriented femoral condyle fractures. The addition of a horizontal plate, perpendicular to the main fracture plane, significantly increased the resistance to shearing forces at the fracture site when compared to constructs adopting just cannulated screws.

LEVEL OF EVIDENCE

Biomechanical study.

Treatment of Unfixable Inferior Pole Fractures of the Patella Using an All-Suture Internal Fixation Technique

Inferior pole fractures of the patella are a type of patellar fracture that has various complexities. Most current techniques are associated with hardware-related complications, which is one of the main concerns when treating this complex fracture. We present a new technique that does not require metal implant removal, causes little to no irritation of the quadriceps muscle, and provides strong fixation that allows for early range of motion postoperatively.

Assessing the effectiveness of intramedullary nailing for tibial shaft fractures in a low-income setting: a prospective study in Yemen

BACKGROUND

Tibial shaft fractures are common injuries that can be treated with various methods, including interlocked intramedullary nail (IMN). However, there is limited data on the clinical outcomes of IMN for tibial shaft fractures in Yemen.

OBJECTIVE

To evaluate the clinical outcomes of primary IMN for tibial shaft fractures in Yemen.

METHODS

This was a prospective study of 134 patients who underwent primary IMN for tibial shaft fractures et al.-Thawra Modern General Hospital in Sana'a, Yemen, between June 2016 and June 2020. The patients were between 18 and 70 years old, and the fractures were classified according to the AO classification system. The fractures were treated with IMN using a standard technique. The patients were followed up for a minimum of 2 years. The outcome measures included union time, complications, and functional scores.

RESULTS

The mean union time was 17 weeks. The overall complication rate was 18.7%. The most common complications were infection (8.2%), delayed union (6.7%), and nonunion (3.7%). The mean functional scores at the final follow-up were 91.4 for the Knee Society Score and 90.2 for the American Orthopaedic Foot and Ankle Society Score.

CONCLUSION

Primary IMN is an effective and reliable method for treating tibial shaft fractures in Yemen, with acceptable union time, complication rate, and functional outcomes.

Geographical Differences in Wound Complication Rates Following the Sinus Tarsi Approach in Displaced Intra-articular Calcaneal Fractures: A Systematic Review of the Literature

Background

The sinus tarsi approach (STA) has gained popularity for the treatment of displaced intra-articular calcaneal fractures. No large studies comparing wound complications worldwide after STA surgery are available. The aim of this systematic review was to compare postoperative wound complication (POWC) and postoperative wound infection (POWI) rates following STA surgery between continents and countries and their differences in climate.

Methods

A literature search was performed using the databases of PubMed, Embase, and the Cochrane Library. Studies published before January 1, 2000, including < 10 patients and written in a language other than English were excluded.

Results

In total, 86 studies containing 4,392 surgeries via STA from 20 different countries were included. The mean POWC was 5.9% and the mean POWI was 4.4%. The highest median POWC rate was in North America (8.5%) and the lowest in South America (2.0%). No significant differences were found in the POWC and POWI rates between countries (p = 0.178 and p = 0.570, respectively), but significant differences were found between the POWC and POWI rates between continents (p = 0.011 and p = 0.036, respectively). The number of surgeries per year and climate differences, as represented by mean local temperature, were not correlated with both the POWC/POWI rates and functional outcome scores.

Conclusions

Significant differences between the POWC and POWI rates were found between continents but not between individual countries. With a mean POWC of 5.9% and a mean POWI rate of 4.4%, STA has an intrinsic low risk for complications given the minimally invasive nature of the approach and is inevitably becoming the gold standard for calcaneal surgery.

[Meta-analysis of the role of fibular fixation in tibiofibular fractures]

OBJECTIVE

To compare the role and importance of fibular fixation in tibiofibular fractures by Meta-analysis.

METHODS

The literature related to the comparison of the efficacy of fixation of the fibula with or without fixation on the treatment of tibiofibular fractures was searched through the databases of China Knowledge Network, Wipu, Wanfang, The Cochrane Library, Web of science and Pubmed, and statistical analysis was performed using RevMan 5.3 software. The rates of malrotation, rotational deformity, internal/external deformity, anterior/posterior deformity, non-union, infection, secondary surgery and operative time were compared between the fibula fixation and non-fixation groups.

RESULTS

A total of 11 publications were included, six randomised controlled trials and five case-control trials, eight of which were of high quality. A total of 813 cases were included, of which 383 were treated with fibula fixation and 430 with unfixed fibulae.Meta-analysis results showed that fixation of the fibulae in the treatment of tibiofibular fractures reduced the rates of postoperative rotational deformity[RR=0.22, 95%CI(0.10, 0.45), P<0.000 1] and internal/external deformity[RR=0.34, 95%CI(0.14, 0.84), P=0.02] and promoted fracture healing [RR=0.76, 95%CI(0.58, 0.99), P=0.04]. In contrast, the rates of poor reduction [RR=0.48, 95% CI(0.10, 2.33), P=0.36], anterior/posterior deformity[RR=1.50, 95%CI(0.76, 2.96), P=0.24], infection[RR=1.43, 95%CI(0.76, 2.72), P=0.27], secondary surgery[RR=1.32, 95%CI(0.82, 2.11), P=0.25], and operative time[MD=10.21, 95%CI(-17.79, 38.21), P=0.47] were not statistically significant (P>0.05) for comparison.

CONCLUSION

Simultaneous fixation of the tibia and fibula is clinically more effective in the treatment of tibiofibular fractures.

Traumatic bilateral acetabular fracture secondary to high-energy trauma in healthy adults

BACKGROUND

Bilateral acetabular fracture is a very rare presentation among the trauma patients, as the pattern and the degree of the forces required to fracture both acetabula is very unique. The primary purpose of this study is to report a series of adult patients presenting with post-traumatic bilateral acetabular fracture without any history of pathological or metabolic bone disease.

PATIENTS AND METHODS

In this retrospective study, 18 cases of traumatic bilateral acetabular fracture were included. There was predominance of both column (four patients on left and six on right) followed by anterior column (two patients left and four on right) and posterior wall (three patients left and right). They were treated surgically through open reduction and internal fixation. All cases were followed up for at least 13 months. Matta's criteria were used for radiological evaluation on plain radiographs. Functional outcome was evaluated using the Merle d'Aubigne and postel score at final follow-up.

RESULTS

No patients were lost during the follow-up period; there was one case of surgical site infection. There were three cases of postoperative osteoarthritis, one case of heterotrophic ossification, one case of persistent sciatic nerve palsy and one case of lateral femoral cutaneous nerve palsy. The radiological evaluation according to Matta's criteria revealed anatomic reduction in 12 patients, imperfect reduction in three patients while other three patients had poor reduction. According to modified Merle d'Aubigne and Postel score, 10 cases were rated as excellent, five cases as good and three cases presented fair (one case) to poor (two cases) results.

CONCLUSION

We report an unusual case series of bilateral acetabular fracture successfully managed surgically with good clinical outcome. With the increasing incidence of route traffic accidents, such cases would probably be recurrent in the upcoming years.

Improved weight bearing during gait at 6 weeks post-surgery with an angle stable locking system after distal tibial fracture

BACKGROUND

Functional recovery after intramedullary nailing of distal tibial fractures can be monitored using ipsilateral vertical ground reaction forces (vGRF), giving insight into recovery of patients' gait symmetry. Previous work compared patient cohorts to healthy controls, but it remains unclear if these metrics can identify treatment-based differences in return to function post-surgery.

RESEARCH QUESTION

Is treatment of a distal tibial fracture with intramedullary nailing with an angle stable locking system (ASLS) associated with higher ipsilateral vGRF and improved symmetry compared to conventional intramedullary nailing at an early time point?

METHODS

Thirty-nine patients treated with ASLS intramedullary nailing were retrospectively compared to thirty-nine patients with conventional locking. vGRFs were collected at 1, 6, 12, 26, and 52 weeks post-surgery during standing and gait. Discrete metrics of ipsilateral vGRF (maximal force, impulse) and asymmetry were compared between treatments at each time point. Time-scale comparisons of ipsilateral vGRF and lower limb asymmetry were additionally performed for gait trials. Mann-Whitney Test or a two-way analysis of variance tested discrete comparisons; statistical non-parametric mapping tested time-scale data between treatment groups.

RESULTS

During gait, ASLS-treated patients applied more load on the operated limb (17-38% stance, p = 0.015) and consequently loaded limbs more symmetrically (8-37% stance, p = 0.008) during the loading response at 6 weeks post-surgery compared to conventional IM treatment. Discrete measures of symmetry at the same time point identified treatment-based differences in maximal force (p = 0.039) and impulse (p = 0.012), with ASLS-treated patients exhibiting more symmetry. No differences were identified in gait trials at later time points nor from all standing trials.

SIGNIFICANCE

During the initial loading response of gait, increased ipsilateral vGRF and improved weightbearing symmetry were identified in ASLS patients at 6 weeks post-surgery compared to conventional IM nailing. Early and objective metrics of dynamic movement are suggested to identify treatment-based differences in functional recovery.

Functionally graded 3D printed plates for rib fracture fixation

BACKGROUND

Design freedom offered by additive manufacturing allows for the implementation of functional gradients - where mechanical stiffness is decreased along the length of the implant. It is unclear if such changes will influence failure mechanisms in the context of rib fracture repair. We hypothesized that our novel functionally graded rib implants would be less stiff than controls and decrease occurrence of secondary fracture at implant ends.

METHODS

Five novel additively manufactured rib implants were tested along with a clinically used Control implant. Fracture reconstructions were modeled with custom synthetic rib bones with a transverse B1 fracture. Ribs were compressed in a cyclic two-point bend test for 360,000 cycles followed by a ramp to failure test. Differences in cyclic stiffness, 3D interfragmentary motions, ramp-to-failure stiffness, maximum load, and work to failure were determined.

FINDINGS

The Control group had lower construct stiffness (0.76 ± 0.28 N/mm), compared to all novel implant designs (means: 1.35-1.61 N/mm, p < 0.05) and rotated significantly more about the bending axis (2.7° ± 1.3°) than the additively manufactured groups (means between 1.2° - 1.6°, p < 0.05). All constructs failed via bone fracture at the most posterior screw hole. Experimental implants were stiffer than Controls, and there were few significant differences between functional gradient groups.

INTERPRETATION

Additively manufactured, functionally graded designs have the potential to change the form and function of trauma implants. Here, the impact of functional gradients was limited because implants had small cross-sectional areas.

Outcomes of the Modified Stoppa Approach in Acetabular Fracture Management: Incidence of Nerve Injuries

Objectives

Displaced acetabular fractures are complex injuries that necessitate precise surgical intervention. Obturator nerve injuries occur in approximately 2% of cases. The modified Stoppa approach, offering enhanced exposure of the quadrilateral plate, has gained attraction as an alternative technique for anterior acetabular fractures. However, its proximity to the obturator nerve poses a risk of iatrogenic injury. This study aimed to investigate the incidence of nerve injuries and functional outcomes in patients undergoing the modified Stoppa approach for traumatic acetabular fractures.

Methods

This retrospective study involved 86 patients with anterior column fractures, whose data were prospectively collected. The fractures were treated using the modified Stoppa approach. Exclusion criteria were pathological fractures, alternative surgical approaches, prior nerve injuries, hip issues, refusal to participate, or inadequate follow-up. Data collection involved pre-operative imaging, thorough post-operative neurological assessments, and post-operative radiographic evaluation. Functional outcomes were assessed using the Harris Hip Score (HHS).

Results

Most patients were male (n=54) with a mean age of 40±17.3 years. Post-operative infection occurred in six cases, with resolution in four through antibiotics and two necessitating device removal. Obturator nerve damage was detected in 14 patients, comprising nine traumatic and five iatrogenic cases. During the follow-up, symptoms improved in all patients, except for the four patients with iatrogenic nerve damage.

Conclusion

Traumatic nerve injuries generally heal naturally over time. In contrast, iatrogenic injuries have a less optimistic prognosis, potentially resulting in lasting neurological deficits.

Finite element analysis and a pilot study of different fixation constructs for Danis-Weber A and B lateral malleolus fractures

BACKGROUND

Displaced lateral malleolus fractures are typically stabilised through open reduction and internal fixation. The biomechanically and clinically efficacy of locking plates and lag screws, particularly in Weber A and B distal fibular fractures remains a subject of contention. This study examines two locking plate designs for lateral malleolus fractures, evaluating their performance with and without interfragmentary screws using finite element models.

METHODS

Utilising CT images of a healthy adult male volunteer, a three-dimensional finite element model was constructed. The Fibula-specific Flank Multiaxial Locking Anatomic Plate (FMLP) and the Conventional Locking Plate (CLP) were subjected to stabilisation, both with and without an interfragmentary screw, mimicking the Danis-Weber A and B lateral malleolus oblique fracture fixation. Loads of 140 N and 70 N, equivalent to 20% of the body weight, were applied to simulate the single-leg and two-leg standing conditions in the axial direction. The von Mises stress (VMS) distributions and element displacements were subsequently analyzed.

RESULTS

In the Danis-Weber A fracture model group, the FMLP with an interfragmentary screw fixation exhibited the lowest peak VMS values: 51.9 MPa in the fibula, 89.0 MPa in the plate, and 61.3 MPa in the screws for simulating single-leg conditions. Under two-leg standing conditions, these peak VMS values decreased to 25.9 MPa in the fibula, 44.5 MPa in the plate, and 30.6 MPa in the screws, respectively. Furthermore, the overall structural peak displacements during single-leg standing for both Weber-A and B fractures with different implants ranged from 1.61 to 2.54 mm. While standing on two feet, the ranged was from 0.80 to 1.27 mm. An interfragmentary screw at the oblique fracture site resulted in reduced the peak value of VMS in the fibula, plate, screws, consequently decreased the overall structural displacement for FMLP and CLP fixation in lateral malleolus fractures.

CONCLUSIONS

The current finite element analysis (FEA) demonstrates that FMLP exhibits superior mechanical characteristics in Danis-Weber A and B lateral malleolus fractures compared to CLP. The inclusion of an interfragmentary screw, combined with locking plate design, enhances stability for simple oblique distal fibular fractures. The FMLP presents itself as potential as an alternative for lateral malleolus fractures from a biomechanical perspective. Nevertheless, further verification of these results is imperative through subsequent clinical studies.

Does the Surgical Approach Matter in Treating Odontoid Fractures? A Comparison of Mechanical Complication Rates Between Anterior Versus Posterior Surgical Approaches: A Meta-Analysis and Systematic Review

Objective

Odontoid fractures are treated surgically through the anterior or posterior approach. Each surgical approach has its advantages and disadvantages, so the preferred approach remains debatable. There are few meta-analyses or systemic reviews on the mechanical complications of surgical treatment for odontoid fractures. This meta-analysis aimed to compare the operation-related morbidity, including mechanical complications, and mortality of patients with odontoid fractures, treated via the anterior or posterior approach.

Methods

A systematic search was performed on PubMed/Medline, Embase, and the Cochrane Library for the studies up to October 2023 on the complication rate of the surgical treatment of odontoid fractures, related to the surgical approach. The risk ratios (RR) with the 95% confidence intervals (CIs) were pooled to assess the mechanical complication rates, other complications, revision surgery, and mortality, depending on the surgical approach.

Results

A total of 1,519 studies were retrieved using the search strategy, and 782 patients from 15 articles were included in this meta-analysis. Mechanical complications were significantly more frequent in the anterior surgical group with low heterogeneity. The incidences of fracture nonunion and revision surgery were also higher in the anterior surgery group. However, there was no significant difference in systemic complications and mortality rates between the two groups.

Conclusion

The posterior approach was more advantageous than the anterior approach in terms of mechanical complications, fusion rates, and incidence of revision surgery. However, further studies, should be performed to strengthen these results.

Feasibility of Two-Screw Anterior Fixation for Odontoid Fractures in a Chinese Population: A Morphometric Study Based on Computed Tomography

Background

To evaluate the feasibility of treating odontoid fractures in the Chinese population with two cortical screws based on computed tomography (CT) scans and describe a new measurement strategy to guide screw insertion in treating these fractures.

Methods

A retrospective review of cervical computed tomographic scans of 128 patients (aged 18-76 years; men, 55 [43.0%]) was performed. The minimum external transverse diameter (METD), minimum external anteroposterior diameter (MEAD), maximum screw length (MSL), and screw projection back angle (SPBA) of the odontoid process were measured on coronal and sagittal CT images.

Results

The mean values of METD and MEAD were 10.0 ± 1.1 mm and 12.0 ± 1.0 mm, respectively, in men and 9.2 ± 1.0 mm and 11.0 ± 1.0 mm, respectively, in women. Both measurements were significantly higher in men (p < 0.001). In total, 87 individuals (68%) had METD > 9.0 mm that could accommodate two 3.5-mm cortical screws. The mean MSL value and SPBA range were 34.4 ± 2.9 mm and 13.5°-24.2°, respectively, with no statistically significant difference between men and women.

Conclusions

The insertion of two 3.5-mm cortical screws was possible for anterior fixation of odontoid fractures in 87 patients (68%) in our study, and there was a statistically significant difference between men and women.

Design considerations for patient-specific bone fixation plates: a literature review

In orthopedic surgery, patient-specific bone plates are used for fixation when conventional bone plates do not fit the specific anatomy of a patient. However, plate failure can occur due to a lack of properly established design parameters that support optimal biomechanical properties of the plate.This review provides an overview of design parameters and biomechanical properties of patient-specific bone plates, which can assist in the design of the optimal plate.A literature search was conducted through PubMed and Embase, resulting in the inclusion of 78 studies, comprising clinical studies using patient-specific bone plates for fracture fixation or experimental studies that evaluated biomechanical properties or design parameters of bone plates. Biomechanical properties of the plates, including elastic stiffness, yield strength, tensile strength, and Poisson's ratio are influenced by various factors, such as material properties, geometry, interface distance, fixation mechanism, screw pattern, working length and manufacturing techniques.Although variations within studies challenge direct translation of experimental results into clinical practice, this review serves as a useful reference guide to determine which parameters must be carefully considered during the design and manufacturing process to achieve the desired biomechanical properties of a plate for fixation of a specific type of fracture.

Mechanical evaluation of the effect of the rod to rod distance on the stiffness of uniplanar external fixator frames

PURPOSE

To investigate the effect of the rod-to-rod distance on the mechanical stability of single-rod and double-rod external fixator frames.

METHODS

 Four different constructs, one single-rod and three double-rod constructs with different rod-rod distances, were subjected to the axial, bending, and torsional forces. The stiffness of different configurations was calculated.

RESULTS

 Single-rod configuration had statistically the lowest stiffness when subjected to the axial, bending, and torsional forces. Maximum stiffness against the axial and anterior-posterior bending forces was achieved when the rod-rod distance was adjusted to 50 mm (halfway between the first rod and the end of the Schanz pins). There was no statistically significant difference in lateral bending stiffness among different double-rod configurations (p value: 0.435). The maximum stiffness against torsional forces was achieved when the rod-rod distance was adjusted to 100 mm (the second rod at the end of the Schanz pins).

CONCLUSION

 Double-rod uniplanar external fixator frames are significantly stiffer than the single-rod constructs, and however, the rod-rod distance can significantly affect the construct stiffness. We found that a frame with 50 mm rod-rod distance was the optimum fixator among tested configurations that allowed a balance between axial, bending, and torsional stiffness of the construct.

Surgical versus non-surgical treatment of flail chest: a meta-analysis of randomized controlled trials

PURPOSE

Conflicting evidence exists on the choice of surgical or non-surgical treatment of flail chest injuries. We aimed to perform a meta-analysis comparing outcomes in patients presenting flail chest undergoing surgical or non-surgical treatment.

METHODS

Embase, PubMed, and Cochrane databases were searched for randomized controlled trials (RCTs) comparing surgery to no surgery in patients with acute unstable chest wall injuries. We computed weighted mean differences (WMDs) for continuous outcomes and risk ratios (RRs) for binary endpoints, with 95% confidence intervals (CIs). Random effects meta-analyses were performed. Heterogeneity was assessed using I2 statistics.

RESULTS

Six RCTs (544 patients) were included, and surgical treatment was used in 269 (49.4%). Compared to no surgery, surgery reduced mechanical ventilation days (WMD - 4.34, 95% CI - 6.98, - 1.69; p < 0.01; I2 = 87%; GRADE: very low; PI - 13.51, 4.84); length of intensive care unit stay (WMD - 4.62, 95% CI - 7.19, - 2.05; p < 0.01; I2 = 78%; GRADE: low; PI - 12.86, 3.61) and the incidence of pneumonia (RR 0.50, 95% CI 0.31, 0.81; p = 0.005; I2 = 54%; GRADE: moderate; PI 0.13, 1.91). No difference in mortality (RR 0.56, 95% CI 0.19, 1.65; p = 0.27; I2 = 23%; GRADE: moderate; PI 0.04, 7.25), length of hospital stay (WMD - 5.39, 95% CI - 11.38, - 0.60; p = 0.08; I2 = 89%; GRADE: very low; PI - 11.38, 0.60), or need for tracheostomy (RR 0.59, 95% CI 0.34, 1.03; p = 0.06; I2 = 54%; GRADE: moderate; PI 0.11, 3.24) was found.

CONCLUSIONS

Our results suggest that surgical treatment is advantageous compared to non-surgical treatment for patients with flail chest secondary to rib fractures.

Treatment of Distal Third Humeral Shaft Fracture with Intramedullary Nail Combined with Anterior Minimally Invasive Plate Osteosynthesis

OBJECTIVE

The treatment of distal third humeral shaft fracture is difficult. Studies have shown that anterior minimally invasive plate has lower probability of complication and higher healing rate. However there is no applicable anatomical plate at present. This study is to investigate the clinical effect of intramedullary nail combined with anterior minimally invasive plate in the treatment of distal humeral shaft fractures.

METHODS

The data of 83 patients with lower humerus shaft fracture treated from September 2015 to January 2020 were analyzed. According to different treatment methods, they were divided into two groups: 40 patients were treated with intramedullary nailing combined with minimally invasive anterior plate fixation (group A), and 43 patients were treated with double plate fixation through posterior approach (group B). General preoperative data, operative time, intraoperative blood loss, total incision length, fracture healing time, shoulder and elbow visual analogue scale (VAS) score, Constant-Murley shoulder function score, Mayo elbow function score, and complications were recorded and compared between the two groups. Two independent sample t-tests was used for follow-up, age, BMI, operation time, intraoperative bleeding, total incision length, fracture healing time, Constant-Murley score and Mayo score, and rank sum test was used for VAS score of shoulder and elbow.

RESULTS

There was no significant difference in preoperative general data between the two groups (p > 0.05), indicating comparability. There were no significant differences in operation time, total incision length, fracture healing time, Constant-Murley shoulder function score at the last follow-up, Mayo elbow function score, and shoulder and elbow VAS pain score between 2 groups (p > 0.05). The amount of intraoperative blood loss in observation group was 76.98 ± 16.46, which was significantly less than that in control group, and the difference was statistically significant (p < 0.01). There were no radial nerve injury, musculocutaneous nerve injury, incision infection and fracture nonunion in the observation group. In the control group, four cases of iatrogenic radial nerve injury, three cases of incision infection and three cases of fracture nonunion were found. The complication rate was 23.3% (10/43). There was statistical difference in the incidence of complications between the two groups (p < 0.01).

CONCLUSION

A humeral intramedullary nail combined with an anterior minimally invasive plate in the treatment of distal humeral shaft fracture has the advantages of less soft tissue damage, less blood transfusion, high fracture healing rate and low risk of iatrogenic radial nerve injury, which is an effective method for clinical treatment of this type of fracture.

Treatment of Unstable Sacral Fractures with Robotically-aided Minimally Invasive Triangular Fixation

OBJECTIVE

The treatment of unstable sacral fractures is huge challenge to surgeons. Robotically-aided minimally invasive triangular fixation (RoboTFX) is the most advanced technique up to now. This study is to evaluate the clinical outcomes of unstable sacral fractures treated with RoboTFX.

METHODS

From March 2017 to October 2021, 48 consecutive patients with unstable sacral fractures were included in the study. All patients received surgical treatment with triangular fixation (TFX). Patients were divided into four groups according to the number of fractures (uni- or bilateral) and surgical method employed (RoboTFX or traditional open TFX). Between these four groups, clinical data on operation time, intraoperative bleeding, intraoperative fluoroscopy time, infection rate, fracture healing rates, insertion accuracy, Majeed pelvic outcome score, Mears' criterion, and Gibbons score were compared. Quantitative data were expressed as mean ± standard deviation and compared using Student's t-test. Categorical variable were compared using the Pearson's χ2 test.

RESULTS

Comparing unilateral RoboTFX versus open TFX, neither fracture healing rate, infection rate, Majeed pelvic outcome score, Mears' radiological evaluation criterion, nor Gibbons score of the two groups were statistically significantly different (p > 0.05). However, operation time, intraoperative bleeding, intraoperative fluoroscopy time, and insertion accuracy in the RoboTFX group were all significantly better than those of the traditional open group (p < 0.05). Likewise, operation time, intraoperative bleeding, intraoperative fluoroscopy time, and accuracy of fixation insertion of the bilateral RoboTFX group were significantly better than those of the bilateral open group (p < 0.05). Meanwhile infection rate, fracture healing rate, Majeed score, Mears' criterion, and Gibbons score of two groups were not significantly different (p > 0.05).

CONCLUSION

RoboTFX has the advantages of less operation time, less intraoperative bleeding and fluoroscopy, more accurate fixation insertion, and a higher healing rate compared to traditional open methods in the treatment of unstable sacral fractures. However, RoboTFX requires a few critical considerations, and the indications of its operation should be strictly evaluated.

Clinical and radiographic outcomes after paediatric supracondylar humeral fractures treated with combined intramedullary and lateral wire fixation: our experience in fifty-one cases

PURPOSE

Displaced supracondylar humerus fractures in children are known for their high rate of complications and require urgent surgical treatment. Basically, there are two methods of fracture fixation: the lateral pin technique and the crossed pin technique. However, the best technique remains debated. The aim of this study was to evaluate the clinical and radiographic outcomes of our method of fixation using combined intramedullary and lateral wires for treatment of displaced supracondylar humeral fractures in paediatric patients.

METHOD

Fifty-one paediatric patients were treated for displaced supracondylar humeral fractures. The method of fracture fixation used consists of two Kirschner wires inserted one intramedullary and the other laterally. Clinical and radiographic outcomes were assessed at last follow-up.

RESULTS

According to Gartland's classification, 17 fractures (33%) were type 2 and 34 (67%) were type 3. The mean follow-up period was 7.8 months. Functional outcome according to Flynn's criteria was satisfactory in all cases with 92% graded as excellent or good. Cosmetic outcome according to Flynn's criteria was satisfactory in all cases. Radiologically, at last follow-up, the mean Baumann angle was 69° (63-82°) and the mean lateral capitellohumeral angle was 41° (32-50°).

CONCLUSION

Patients managed with combined intramedullary and lateral wires experience satisfactory results. Moreover, this technique, without risk for the ulnar nerve, can be interesting in the treatment of infrafossal fractures and fractures with anterior displacement.

Coupling biomechanical models of implants with biodegradation models: A case study for biodegradable mandibular bone fixation plates

In fracture fixation, biodegradable implant materials are an interesting alternative to conventional non-biodegradable materials as the latter often require a second implant removal surgery to avoid long-term complications. In this study, we present an in silico strategy to design/study biodegradable metal implants focusing on mandibular fracture fixation plates of WE43 (Mg alloy). The in silico strategy is composed of an orchestrated interaction between three separate computational models. The first model simulates the mass loss of the degradable implant based on the chemistry of Mg biodegradation. A second model estimates the loading on the jaw plate in the physiological environment, incorporating a phenomenological dynamic bone regeneration process. The third model characterizes the mechanical behavior of the jaw plate and the influence of material degradation on the mechanical behavior. A sensitivity analysis was performed on parameters related to choices regarding numerical implementation and parameter dependencies were implemented to guarantee robust and correct results. Different clinical scenarios were tested, related to the amount of screws used to fix the plate. The results showed a lower initial strength when more screw holes were left open, as well as a faster decrease over time in strength due to the increased area available for surface degradation. The obtained degradation results were found to be in accordance with previously reported data of in vivo studies with biodegradable plates. The combination of these three models allows for the design of patient-specific biodegradable fixation implants able to deliver the desired mechanical behavior tuned to the bone regeneration process.

Percutaneous helical plate fixation in humeral shaft fractures with proximal extension

BACKGROUND

Humeral shaft fractures with extension to the proximal third are increasingly frequent and technically more demanding. Surgical management of proximal metaphyseal junction humeral fractures is challenging. The aim of this study was to assess the safety, reproducibility, and possibility of early and completed rehabilitation in the percutaneous treatment with helical plates in humeral shaft fractures with proximal extension.

PATIENTS AND METHODS

This was a descriptive, retrospective, single-centre cohort study based on consecutive patients with proximal metaphyseal junction humeral fractures (MIPO-helical-plate-Broggi's cohort). Surgical technique (minimally invasive approach and osteosynthesis): percutaneous treatment with a twisted plate (helical plates).

STUDY VARIABLES

i): Intraoperative and postoperative (up to 1 year after surgery) safety; ii) Reproducibility of the surgical technique [number (percentage) of patients with surgical technique success]. The surgical technique success was defined as the recovering without neurovascular, implant failures and infection issues after one year follow up; and iii) Early and completed (3 months) rehabilitation [number (percentage) of patients]. A descriptive analysis was performed.

RESULTS

Between April 2010 to January 2022, we received 443 humeral shaft fractures at our unit. Of these, 350 fractures were treated surgically. 157 (44.9%) were treated using the minimally invasive approach and osteosynthesis technique with extramedullary implants, of which 46 (46/157, 29.3%, 9 men and 37 women) were performed with almost orthogonally twisted Philos® helical plates. The median (range) age was 67 (51-94) years.

STUDY OUTCOMES

i) Safety: None intraoperative events were gathered. No neurovascular, implant failure and infection issues were reported one year after surgery.; ii) Reproducibility of the surgical technique: only 1 failure (2%, 95%CI:0-11%), who was reoperated; and iii) Early and 3 month of rehabilitation was completed in 45 (98%, 95%CI:89-100%) patients. Forty-five (98%, 95%CI:89-100%) patients recovered their previous function the year after surgery.

CONCLUSIONS

The treatment of humeral shaft fractures with proximal extension based on a minimally invasive approach and osteosynthesis: percutaneous treatment with a twisted plate (helical plates), as this is a submuscular and extraperiosteal technique, is a safe and reproducible technique, and promotes early rehabilitation. In our opinion, it is surgical technique whose main requirement is a good knowledge of topographic anatomy.

Treatment of fracture-related infection in Latin America (FRILA). Proposal for a multicentre regional registry

Postoperative bone infection is a severe complication in the treatment of fractures. The management of this pathology is challenging, but recent advances have been made to achieve standardization that can help diagnosis and decision-making. However, we are unaware of studies validating these models in Latin America. Therefore, this study aims to collect data from patients with fracture-related infections treated in different institutions in Latin America to create a registry that will assist in future clinical decision-making regarding the diagnostic process and the surgical and medical treatment of these patients.

Minimally invasive surgery technique for unstable pelvic ring fractures with severe vertical shear displacement: A retrospective study

BACKGROUND

Unstable pelvic fractures, especially vertical shear fractures, require surgery for correct reduction, rigid fixation, and improved postoperative outcomes. Herein, we assess the effectiveness of our minimally invasive procedure for the management of unstable pelvic fractures.

HYPOTHESIS

We hypothesized that this procedure would be useful for the management of unstable pelvic fractures.

PATIENTS AND METHODS

This study included 28 patients with unstable pelvic fractures (vertical shear injuries; AO types C1-3) treated using minimally invasive surgery for spinopelvic fixation (MIS-SP) between 2014 and 2020 (mean follow-up time, 15 months). The MIS-SP requires four percutaneous pedicle screws and four iliac screw insertions. Subsequently, reduction and fixation are performed.

RESULTS

The mean preoperative displacement of the posterior pelvic elements in craniocaudal correction was 17.6 (range, 9.0-32.2) mm. The mean length of the craniocaudal reduction was 16.5 (8.1-30.1) mm, with a mean reduction rate of 93.5% (78%-100%). The mean length of the mediolateral reduction was 11.3 (3.9-19.6) mm, with a mean reduction rate of 87.3% (76%-100%).

DISCUSSION

Our novel reduction and fixation procedure is a powerful, minimally invasive option for the treatment of unstable pelvic ring fractures.

LEVEL OF EVIDENCE

III.