Effect of zeta potential of innovative lipid nanocapsules on triamcinolone transdermal delivery

Two pegylated lipid nanocapsules for triamcinolone transdermal delivery were designed. Both present a size close to 50 nm and a single monomodal distribution in particle size (PI < 0.2), with a zeta potential of - 20 ± 2 and + 18 ± 1, respectively. The triamcinolone encapsulation efficacy varied between 68 and 80%. They proved to be stable under storage conditions (4 °C) for at least 6 months and at a physiological temperature, using different media, for 48 h. Also, they were shown not to affect cell viability at the concentrations used. For ex vivo transdermal experiments, newborn pig skin was used. With respect to the triamcinolone transdermal penetration, the nanocapsules were demonstrated to have an absorption promoting effect, both when the drug nanocapsules were in solution or loaded into the hydrogel, quantifying between 2 and 15 times more absorbed drug than the control. In addition, regarding the triamcinolone retained in the skin, it is observed that lipid nanocapsules act as triamcinolone promoters when the nanosystems were in solution and when they were included in the hydrogel. This vehicle showed a greater triamcinolone reservoir effect in comparison to the nanocapsules, proving to be a good vehicle to formulate triamcinolone transdermal delivery.

Photoprotection and skin irritation effect of hydrogels containing hydroalcoholic extract of red propolis: A natural pathway against skin cancer

The use of natural products in sunscreen formulations as a prophylactic measure against skin cancer is receiving special attention attributed to the photoprotective and antioxidant properties of their chemical components. In this work, we describe the development of topical hydrogel formulations containing hydroalcoholic extract of red propolis (HERP), and the evaluation of the dermal sensitizing effect of the developed products. Sunscreen formulations composed of HERP in different concentrations (1.5, 2.5 or 3.5% w/w) alone or in combination with a chemical (octyl methoxycinnamate) and/or physical (titanium dioxide) filters were developed using poloxamer 407 as gel basis. The preliminary and accelerated stability tests, texture analysis and spreadability tests were performed. All formulations revealed to be stable in preliminary stability assessment. The formulations containing HERP 1.5 and 2.5% alone or associated with the filters showed intense modifications during accelerated stability test, which were confirmed by rheological analyses. The incorporation of HERP and filters in the poloxamer hydrogel decreased the toughness of product (p < 0.05) and the formulation containing HERP alone presented the lowest adhesivity (p < 0.001). The incorporation of HERP in the hydrogel decreased the poloxamer transition temperature, showing different rheological behavior with the increase of HERP concentration. The developed formulations were stable, exhibited non-Newtonian and pseudoplastic behavior, showing in vivo skin compatibility and no skin irritancy.

Prevention of Intra-Abdominal Adhesions Using the Combination of Mediclore® and a Statin

PURPOSE

This study investigated the antiadhesive effects of Mediclore®, rosuvastatin, and a combination of Mediclore and rosuvastatin in a rat adhesion model.

METHODS

The adhesion models (a total of 58 adult male rats) were divided into 4 groups. The control group (group C) received no special materials except for a saline. The experimental groups were treated with 5 mL of Mediclore (group M), rosuvastatin (group R), or rosuvastatin and Mediclore (group RM), and these materials were intraperitoneally placed under the incision. At postoperative day 14, the rats underwent re-laparotomy and adhesiolysis. Three investigators blinded to group assignment scored the extent of adhesion formation, the numbers of remote adhesions, and the extent of acute/chronic inflammation, fibrosis, edema, and congestion on resected specimens via histologic examination.

RESULTS

The macroscopic adhesion score in group RM (7.27 ± 3.51) was significantly lower than those in groups C (13.36 ± 2.24) and R (11.71 ± 1.98); group M (9.13 ± 4.09) had a significantly lower adhesion score than group C. The number of remote adhesions was significantly lower in groups R and RM than in group C. The acute inflammation score, chronic inflammation score, and fibrosis score in group RM; the acute inflammation score in group R; and the fibrosis score in group M were significantly lower than those in group C.

CONCLUSION

The intraperitoneal application of Mediclore and a combination of Mediclore and rosuvastatin effectively reduced postoperative adhesions.

Hyaluronan-coated nanoparticles for active tumor targeting: Influence of polysaccharide molecular weight on cell uptake

Here we aimed to correlate different molecular weights of hyaluronic acid (HA), 200, 800 and 1437 kDa, used to decorate poly(lactic-co-glycolic acid) (PLGA)-based nanoparticles (NPs), to their cell uptakes. NP internalization kinetics in CD44-overexpressing breast carcinoma cells were quantified, using healthy fibroblast cells as reference. Actually, NP uptake and selectivity by tumor cells were maximized for NPs HA 800 kDa, while being minimum for NPs HA1400 kDa. This unexpected result could be explained considering that the interaction between NPs and tumor cells is dictated by rearrangement and conformation of that segment of HA chain that actually protrudes from the NPs. Overall, results obtained in this work point at how HA molecular weight, is pivotal project parameter in NP formulation to promote active targeting in the CD44 overexpressing cancer cells.

Phase behavior of poloxamer 188 in frozen aqueous solutions - Influence of processing conditions and cosolutes

The aim of the study is to investigate the thermal behavior of poloxamer 188 (P188) in binary (P188-water) and ternary (P188-trehalose-water) solutions during freezing and thawing. The thermal behavior of P188 in frozen (binary and ternary) systems was characterized by differential scanning calorimetry (DSC) and low-temperature X-ray powder diffractometry (XPRD) as a complementary technique. The influence of processing conditions (cooling rate, annealing) and a noncrystallizing co-solute (addition of trehalose) on the behavior of P188 was evaluated during freezing as well as thawing. In rapidly cooled (10 °C/min) aqueous binary solutions, P188 (10% w/v) was retained in the amorphous state. At slower cooling rates (0.5-5 °C/min), the extent of crystallization depended on the cooling rate. In ternary P188-trehalose-water systems (P188 4% w/v, trehalose 0-10% w/v), a concentration dependent inhibition of P188 crystallization was observed with increasing trehalose concentration. However, irrespective of trehalose concentration, annealing resulted in P188 crystallization. The presence of trehalose as well as the processing conditions (cooling rate and annealing) influenced the physical state of P188 at different stages of freezing and thawing. As the cooling rate decreased, the extent of P188 crystallization progressively increased. In presence of trehalose (≥4.0% w/v) crystallization of P188 (4.0% w/v) was inhibited and this effect could be reversed by annealing. Depending on the intended application, the physical form of P188 could be modulated, by annealing even in presence of a noncrystallizing solute.

Interactions between poloxamer, PEOx-PPOy-PEOx, and non-ionic surfactant, sucrose monolaurate: A study on potential allergenic effect using model phospholipid membrane

Sugar-based surfactants are involved in skin related allergy cases in the past decade. Skin irritation starts with the interaction of the surfactant with the skin lipids leading to lipid emulsification and eventual barrier damage. Polymers or co-surfactants can be used to mitigate the allergenic effect but the mechanism of formulation mildness on skin remains unclear. We have used the quartz crystal microbalance (QCM) together with dissipative particle dynamics (DPD) simulation, small angle x-ray scattering (SAXS) as well as cell viability tests to decipher the interactions between poloxamers and sucrose monolaurate (SML), and how these interactions could prevent the disruption of a model supported phospholipid bilayer (SLB). Poloxamer addition to the SML solution can delay or totally prevent the disruption of the SLB depending on poloxamer type and concentration. Poloxamer P407 (Pluronic® F127) delays the onset of disruption while poloxamer P188 (Pluronic® F68) does not preserve the bilayer integrity even at high concentration of up to 15% w/w. Preservation of the SLB is likely due to the differences in the aggregates formation between SML-F127 and SML-F68 mixtures with corresponding retarded motion of SML micelles through the SML-F127 polymer matrix that improved cell viability.

Sulforaphane-loaded hyaluronic acid-poloxamer hybrid hydrogel enhances cartilage protection in osteoarthritis models

Sulforaphane (SFN) is an isothiocyanate with anti-arthritic and immuno-regulatory activities, supported by the downregulation of NF-κB pathway, reduction on metalloproteinases expression and prevention of cytokine-induced cartilage degeneration implicated in OA progression. SFN promising pharmacological effects associated to its possible use, by intra-articular route and directly in contact to the site of action, highlight SFN as promising candidate for the development of drug-delivery systems. The association of poloxamers (PL) and hyaluronic acid (HA) supports the development of osteotrophic and chondroprotective pharmaceutical formulations. This study aims to develop PL-HA hybrid hydrogels as delivery systems for SFN intra-articular release and evaluate their biocompatibility and efficacy for osteoarthritis treatment. All formulations showed viscoelastic behavior and cubic phase organization. SFN incorporation and drug loading showed a concentration-dependent behavior following HA addition. Drug release profiles were influenced by both diffusion and relaxation of polymeric chains mechanisms. The PL407-PL338-HA-SFN hydrogel did not evoke pronounced cytotoxic effects on either osteoblast or chondrosarcoma cell lines. In vitro/ex vivo pharmacological evaluation interfered with an elevated activation of NF-κB and COX-2, increased the type II collagen expression, and inhibited proteoglycan depletion. These results highlight the biocompatibility and the pharmacological efficacy of PL-HA hybrid hydrogels as delivery systems for SFN intra-articular release for OA treatment.

Effects of quinolone and poloxamer otic suspension on rat tympanic membranes

OBJECTIVES

Commercial quinolone ear drops (0.3%) delivered twice daily for 10 days cause tympanic membrane perforations (TMPs) in rats. We aimed to evaluate if a single application of 6% quinolone in poloxamer causes TMPs in rats.

METHODS

Rats were randomized to 5 groups (10/group), with one ear receiving a single otic instillation of 16% poloxamer 407 or 188 (as found in a commercial otic preparation and a wound dressing), or ofloxacin, ciprofloxacin, or neomycin at 6% in suspension with 16% poloxamer 407. The contralateral ear received saline. Rats were assessed over 42 days.

RESULTS

No TMPs were seen in ears treated with saline, poloxamer 407 or 188, or in ears treated with ofloxacin-, ciprofloxacin-, or neomycin-poloxamer suspension. White precipitates were observed on the canal or tympanic membrane of ciprofloxacin and ofloxacin-treated ears. Precipitates were more common in ciprofloxacin-treated ears until day 10 (p < 0.0001 to p = 0.0004). Tympanic membrane surface irregularities, were also observed mostly in the ciprofloxacin-treated ears from day 3-42 (p = 0.03 to p = 0.0033).

CONCLUSIONS

Quinolone in poloxamer otic preparations may be a safer therapeutic alternative to conventional quinolone ear drops in ears with intact TMs, particularly those felt to be at risk for developing TMPs.

Bioactive glass/poloxamer 407 hydrogel composite as a drug delivery system: The interplay between glass dissolution and drug release kinetics

Since patients suffer pain in the post-surgery of bone repair interventions, bioactive glass/hydrogel drug delivery systems containing local anesthetics, such as ropivacaine, could improve patient life quality by combining bone regeneration with anesthetics. However, poloxamer-based hydrogel properties are sensitive to ions, temperature, and water contents and could be structurally influenced by the ionic dissolution products from bioactive glasses of different compositions. Therefore, this study evaluated the interplay between bioactive glass dissolution kinetics and poloxamer 407 properties, establishing a correlation between changes in the hydrogel and drug release kinetics. Three glass compositions were produced, yielding Ca-rich, Na-rich, and an intermediate glass composition. The influence of Ca/Na ratios on the glass structure and dissolution was investigated. Further, the glasses and ropivacaine were incorporated in the poloxamer hydrogel, and the self-assembly ability of poloxamer, the degradation rate, and the drug release kinetics of the composites were evaluated. The results suggested that glass connectivity affected the early-stage of glass dissolution, while sodium mobility influenced the long-term. The dissolution products from the glasses interact with the supramolecular structure of the poloxamer, causing structural changes responsible for hydrogel degradation. Consequently, by changing the Ca/Na ratio in the glasses, it is possible to modulate glass dissolution that, in turn, influences the ropivacaine release. Thus, we propose that the Ca/Na ratio in quaternary bioactive glasses can be used to modulate drug-delivery properties from systems based on bioactive glasses and poloxamer 407.

The development and qualification of liquid adsorption chromatography for poloxamer 188 characterization

Poloxamer 188 (P188) is formulated in proteinaceous therapeutics as an alternative surfactant to polysorbate because of its good chemical stability and surfactant properties, which enable interfacial protection, preventing visible and sub-visible particle formation. However, due to the nature of polymer heterogeneity and limited analytical approaches to resolve the superimposed components of P188, the impact of its quality variance on protein stability is still not well understood. In this study, we developed an analytical method to evaluate the components of P188 as a function of the length of polypropylene oxide (PPO), by maintaining polyethylene oxide (PEO) at the critical point of adsorption (CPA) to eliminate its chromatographic interference. The effectiveness of the separation was confirmed by nuclear magnetic resonance (NMR) spectroscopy and mass spectroscopy (MS) of the individual fractions corresponding to each peak. Additionally, a design of experiments (DoE) and method qualification were carried out to identify and optimize the key operation parameters, including column temperature and evaporative light scattering detector (ELSD) settings that need to be strictly controlled for reliable analytical results. In conclusion, this method is sensitive and reliable to compare the quality variance of commercial P188 and is suitable for routine quality control purposes. The application of this method could help in further understanding the Critical Material Attributes (CMA) that may affect the quality attributes of proteins in formulations.

Sutureless venous microanastomosis using thermosensitive poloxamer and cyanoacrylate: experimental study on a rat model

INTRODUCTION

Sutureless microvascular anastomoses could simplify the microvascular field, shortening operative time and improving the final outcome. The use of thermosensitive poloxamers (TP407) together with the application of cyanoacrylate as an alternative method for conventional sutures was well-documented for arteries, but not for veins. The purpose of our study was to prove the feasibility of this technique for venous anastomoses and compare it with the traditional hand-sewn technique on a rat model.

MATERIALS AND METHODS

Twenty male Sprague-Dawley rats that weighed between 265 and 310 g were used. In the sutureless group (SG), 20 left external jugular veins (LEJV) end-to-end anastomoses were performed using a T704 and cyanoacrylate glue. They were compared to 20 right external jugular veins (REJV) anastomoses sutured with conventional 10-0 stitches (control group - CG). Diameters of veins, anastomosis time, and patency rate at 15 days were reported. Foreign body reaction was assessed histologically.

RESULTS

The mean diameter of the LEJV was 0.94 ± 0.1 mm and 0.95 ± 0.09 mm for the REJV. The mean anastomosis time was 11.9 ± 1.37 min for the SG and 27.75 ± 3.31 min for the CG. In the latter group, the immediate patency rate was 95% and 90% at 15 days. For the SG group, 90% of the anastomoses were patent immediately and 85% at 15 days.

CONCLUSION

TP407 and cyanoacrylate could offer a fast and reliable technique for sutureless venous anastomoses. Before human application, effectiveness of this method remains to be confirmed in larger animals in a long-term follow-up.

Effect of Poloxamer-Based Thermo-Sensitive Sol-Gel Agent on Upper Limb Dysfunction after Axillary Lymph Node Dissection: A Double-Blind Randomized Clinical Trial

Purpose

Restricted shoulder motion is a major morbidity associated with a lower quality of life and disability after axillary lymph node dissection (ALND) in patients with breast cancer. This study sought to evaluate the antiadhesive effect of a poloxamer-based thermosensitive sol-gel (PTAS) agent after ALND.

Methods

We designed a double-blind, multicenter randomized controlled study to evaluate the clinical efficacy and safety of PTAS in reducing upper-limb dysfunction after ALND. The primary outcome was the change in the range of motion (ROM) of the shoulder before surgery and 4 weeks after ALND (early postoperative period). Secondary outcomes were shoulder ROM at six months, axillary web syndrome, and lymphedema (late postoperative period).

Results

A total of 170 patients with planned ALND were randomly assigned to one of 2 groups (poloxamer and control) and 15 patients were excluded. In the poloxamer group (n = 76), PTAS was applied to the surface of the operative field after ALND. ALND was performed without the use of poloxamer in the control group (n = 79). Relative to the control group, the poloxamer group had significantly lower early postoperative restrictions in total shoulder ROM at four weeks (−30.04 ± 27.76 vs. −42.59 ± 36.79; p = 0.0236). In particular, the poloxamer group showed greater reductions in horizontal abduction at four weeks (−3.92 ± 9.80 vs. −10.25 ± 15.42; p = 0.0050). The ROM of the shoulder at 24 weeks, axillary web syndrome, and lymphedema were not significantly different between the two groups. No adverse effects were observed in either group.

Conclusion

We suggest that poloxamer might improve the early postoperative shoulder ROM in patients with breast cancer who have undergone ALND.

Trial Registration

ClinicalTrials.gov Identifier: NCT02967146

Multifunctional PLGA nanoparticles combining transferrin-targetability and pH-stimuli sensitivity enhanced doxorubicin intracellular delivery and in vitro antineoplastic activity in MDR tumor cells

Targeted delivery aims to enhance cellular uptake and improve therapeutic outcome with higher disease specificity. The expression of transferrin receptor (TfR) is upregulated on tumor cells, which make the protein Tf and its receptor vastly relevant when applied to targeting strategies. Here, we proposed Tf-decorated pH-sensitive PLGA nanoparticles containing the chemosensitizer poloxamer as a carrier for doxorubicin delivery to tumor cells (Tf-DOX-PLGA-NPs), aiming at alleviating multidrug resistance (MDR). We performed a range of in vitro studies to assess whether targeted NPs have the ability to improve DOX antitumor potential on resistant NCI/ADR-RES cells. All evaluations of the Tf-decorated NPs were performed comparatively to the nontargeted counterparts, aiming to evidence the real role of NP surface functionalization, along with the benefits of pH-sensitivity and poloxamer, in the improvement of antiproliferative activity and reversal of MDR. Tf-DOX-PLGA-NPs induced higher number of apoptotic events and ROS generation, along with cell cycle arrest. Moreover, they were efficiently internalized by NCI/ADR-RES cells, increasing DOX intracellular accumulation, which supports the greater cell killing ability of these targeted NPs with respect to MDR cells. Altogether, these findings supported the effectiveness of the Tf-surface modification of DOX-PLGA-NPs for an improved antiproliferative activity. Therefore, our pH-responsive Tf-inspired NPs are a promising smart drug delivery system to overcome MDR effect at some extent, enhancing the efficacy of DOX antitumor therapy.

Highlights in poloxamer-based drug delivery systems as strategy at local application for vaginal infections

Infectious diseases related to the vagina include diseases caused by the imbalance of the vaginal flora and by sexually transmitted infections. Some of these present themselves as a public health problem due to the lack of efficient treatment that leads to their complete cure, and others due to the growing resistance to drugs used in therapy. In this sense, new treatment strategies are desirable, with vaginal administration rout being a great choice since can bypass first-pass metabolism and decrease drug interactions and adverse effects. However, it is worth highlighting limitations related to patient's discomfort at application time. Thereby, the use of poloxamer-based drug delivery systems is desirable due its stimuli-sensitive characteristic. Therefore, the present review reports a brief overview of poloxamer properties, biological behavior and advances in poloxamer applications in controlled drug release systems for infectious diseases related to the vagina treatment and prevention.

Poloxamer 188 and hydroxyethyl starch have a cryoprotective synergic effect improving post-thawing quality and fertility of rooster spermatozoa

Poloxamer and hydroxyethyl starch have cytoprotective effects. In the present study, effectiveness was evaluated of these compounds as a cryoprotectant for rooster semen. In Experiment 1 (E1), poloxamer 188 (1%, P188), poloxamer 407 (1%, P407), and control groups were compared after sperm cryopreservation. Experiment 2 (E2) was conducted with 3%, 5%, and 7% of hydroxyethyl starch (H3, H5, H7), also combined with P188 (H3P188, H5P188, H7P188), based on results from E1. Sperm motility was assessed using CASA, abnormal forms and hypo-osmotic swelling (HOS) were evaluated using microscopy, and viability, apoptotic-like changes, and mitochondrial activity were determined using flow cytometry. In E2, there were assessments of fertility and hatching capacity. Results from E1 indicated total and progressive motility, velocity, membrane functionality, viability, and mitochondrial activity were greater with inclusion of P188 in semen extender, with less apoptotic-like changes (P < 0.05). In E2, HES inclusion in semen extender improved total motility, membrane functionality, and mitochondrial activity (P < 0.05), especially H5, which also markedly increased sperm viability and decreased apoptotic-like changes. The combination of P188 with HES increased sperm quality overall, with inclusion of H5P188 resulting in increases of progressive motility and VSL (P < 0.05). The H5 inclusion also increased proportion of fertilized eggs (P < 0.05). Furthermore, the combination of HES and P188 increased proportions of fertilized and hatched eggs compared with the control, with inclusion of H5P188 having the greatest effects. In conclusion, supplementation of semen extender with H5P188 increases post-thawing quality and fertility of rooster sperm, being a safe and effective method for the poultry industry.

Alginate/poloxamer hydrogel obtained by thiol-acrylate photopolymerization for the alleviation of the inflammatory response of human keratinocytes

Hydrogel-based wound dressings have been intensively studied as promising materials for wound healing and care. The mixed-mode thiol-acrylate photopolymerization is used in this paper for alginate/poloxamer hydrogels formation. First, the alginate was modified with thiol groups using the esterification reaction with cysteamine, and second, the terminal hydroxyl groups of poloxamer were esterified with acryloyl chloride to introduce polymerizable acrylate groups. Finally, the cross-linking reaction between the two macromers was performed to produce degradable alginate/poloxamer hydrogels. The optimum conditions for the photo-initiated reaction were studied in order to obtain high gel fractions. The resulting hydrogels have high swelling capacity in simulated physiological conditions, good elasticity and strength, and appropriate porosity, some of the physico-chemical properties required for their applications as wound dressings/patches. The biological assays show that the alginate/poloxamer hydrogels induce proliferation of human keratinocyte and have an anti-inflammatory effect on lipopolysaccharides (LPS)-activated keratinocytes by inhibiting the extracellular signal-regulated kinases (ERK)/ nuclear factor (NF)-kB/ tumor necrosis factor (TNF)-α signalling pathway. Taken together, the results showed that the chemical cross-linked alginate/poloxamer hydrogels may function as a dressing/patch applied directly on the skin lesion to heal the wound by reducing the exacerbated inflammation, the main cause of wound healing delay and local infection.

Physicochemical Excipient-Container Interactions in Prefilled Syringes and Their Impact on Syringe Functionality

Previous studies have shown that parenteral formulation excipients can interact with the silicone oil in prefilled syringes, thereby causing variations in glide force that affect the performance of autoinjectors. Thus, it is crucial to control the glide force of the prefilled syringes to mitigate the potential risk of dose inaccuracies. This study provided a systematic understanding of the chemical interactions between the excipients, physical interactions between the excipients and the container, as well as their impact on the functional performance of prefilled syringes. The design of experiment approach used in this study generated statistically meaningful data, which confirmed that different excipients caused varying increase in glide force in siliconized prefilled syringes. The data indicated that poloxamer 188 can more effectively maintain stable glide forces during accelerated storage conditions compared with polysorbate 80. This finding was further enhanced using Hansen solubility parameters theory, which provided a fundamental understanding of the mechanisms behind the physical interactions. Chemical stability analysis of the surfactants suggested that degradation of excipients also impacts syringe functionality. In summary, the results revealed the unique interactions between parenteral pharmaceutical excipients and primary packaging systems and the physicochemical foundation behind them.

Co-grinding with surfactants as a new approach to enhance in vitro dissolution of praziquantel

This paper evaluates the process of co-grinding with a surfactant as a new approach to enhance physicochemical and biopharmaceutical properties of praziquantel (PZQ), a poorly soluble drug that is essential for the treatment of schistosomiasis, a neglected tropical disease. Surfactants used in this study were poloxamer F-127 and sucrose stearate (C-1816), selected based on their well-documented biocompatibility and solubilizing activity. A series of products were prepared by mechanochemical activation using vibrational ball-mill at different drug to surfactant ratio and milling times. The obtained products were characterised in terms of drug recovery, solubility and in vitro dissolution rates. The obtained results were correlated to solid-state properties of the products analysed by differential scanning calorimetry, powder X-ray diffraction and particle size analysis. Results of UPLC-MS analysis and ¹H-NMR spectroscopy showed that the used surfactants and applied grinding procedures caused no chemical degradation of the PZQ. The physicochemical properties, solubility and the in vitro dissolution enhancement of the co-ground products were related to the drug to surfactant ratio and the grinding protocol applied. The highest enhancement of the in vitro dissolution rate was achieved at the drug to surfactant ratio of 10:3 and 10:2 for F-127 and C-1816, respectively with the milling time of 30 min. The MTT assay on Caco-2 cell line demonstrated the biocompatibility of both co-ground products. Furthermore, the surfactants used did not change intrinsically high intestinal permeability of PZQ (Papp ∼ 4.00 × 10^-5 cm s^-1). The presented results confirmed that the co-grinding with surfactant is a promising new approach in enhancing in vitro dissolution of poorly soluble drugs like PZQ.

Association between Nonionic Amphiphilic Polymer and Ionic Surfactant in Aqueous Solutions: Effect of Polymer Hydrophobicity and Micellization

The interaction in aqueous solutions of surfactants with amphiphilic polymers can be more complex than the surfactant interactions with homopolymers. Interactions between the common ionic surfactant sodium dodecyl sulfate (SDS) and nonionic amphiphilic polymers of the poly(ethylene oxide)-poly(propylene oxide)-poly(ethylene oxide) (PEO-PPO-PEO) type have been probed utilizing a variety of experimental techniques. The polymer amphiphiles studied here are Pluronic F127 (EO₁₀₀PO₆₅EO₁₀₀) and Pluronic P123 (EO₁₉PO₆₉EO₁₉), having the same length PPO block but different length PEO blocks and, accordingly, very different critical micellization concentrations (CMC). With increasing surfactant concentration in aqueous solutions of fixed polymer content, SDS interacts with unassociated PEO-PPO-PEO molecules to first form SDS-rich SDS/Pluronic assemblies and then free SDS micelles. SDS interacts with micellized PEO-PPO-PEO to form Pluronic-rich SDS/Pluronic assemblies, which upon further increase in surfactant concentration, break down and transition into SDS-rich SDS/Pluronic assemblies, followed by free SDS micelle formation. The SDS-rich SDS/Pluronic assemblies exhibit polyelectrolyte characteristics. The interactions and mode of association between nonionic macromolecular amphiphiles and short-chain ionic amphiphiles are affected by the polymer hydrophobicity and its concentration in the aqueous solution. For example, SDS binds to Pluronic F127 micelles at much lower concentrations (~0.01 mM) when compared to Pluronic P123 micelles (~1 mM). The critical association concentration (CAC) values of SDS in aqueous PEO-PPO-PEO solutions are much lower than CAC in aqueous PEO homopolymer solutions.

Novel glucosamine-loaded thermosensitive hydrogels based on poloxamers for osteoarthritis therapy by intra-articular injection

Glucosamine (GlcN) is a common drug used to treat osteoarthritis (OA). To prolong the action time of glucosamine on OA and improve its therapeutic effect, this research explored the potential application of GlcN-loaded thermosensitive hydrogels based on poloxamer 407 and poloxamer 188 for OA therapy by intra-articular injection. The thermosensitive hydrogels were prepared by cold method, and the effects of P407, P188, and GlcN on sol-gel transition temperature (T_sol-gel) were compared. After screening was performed, the optimized formulation showed good temperature sensitivity, and T_sol-gel was approximately 35 °C. In vitro release tests showed that GlcN was slowly released from the thermosensitive hydrogels. After the gels were intra-articularly administered to treat OA in rabbits, the degree of swelling and inflammatory factors were significantly decreased in the hydrogel group compared with those in the OA model group (P < 0.05). Histological results showed that the GlcN-administered group had a good repair effect on damaged cartilage. At the same dose, the effect of the thermosensitive hydrogels was better than that of the aqueous solution. Therefore, GlcN-loaded thermosensitive hydrogels based on poloxamers are promising sustainable delivery systems for OA therapy by intra-articular injection.

Impact of Surfactants on the Functionality of Prefilled Syringes

Previous studies revealed the impact of formulation factors (excipients and pH) on the functionality of prefilled syringes. Surfactant, a critical formulation component for therapeutic proteins and antibodies, aids in minimizing protein adsorption onto interfaces and reduces protein aggregation or particulate formation. This study evaluated the impact of different surfactants and protein concentration on the functionality of prefilled syringes. Syringes filled with solution formulations with different surfactants were stored at various temperatures and evaluated at selected time points. Upon thermal stress, polysorbate 80 and dodecyl-β-d-maltoside containing formulations showed significantly greater increase in glide force when compared with poloxamer 407 containing formulations. In contrast, syringes filled with poloxamer 188 containing formulations did not show any increase in glide force under the same conditions. Based on the results from this study, the increase in syringe glide force was inversely correlated with hydrophobic-lipophilic balance values and surface tension of different surfactants. The mechanism of increase in glide force was primarily the change of silicone oil coverage and lubricity in the barrel of syringes.

Effect of curcumin and cosolvents on the micellization of Pluronic F127 in aqueous solution

The drug solubilization capacity of poloxamers like Pluronic F127 (PF127, poloxamer 407) is dependent on the physical form of the polymer; i.e. the distribution between unimers, aggregates, and micelles. Further, the formation of micelles can alter the stability and pharmacological activity of a drug molecule. It is therefore important to understand how the micellization process is influenced by the addition of excipients and drug molecules. Curcumin is considered a photosensitizer in antimicrobial photodynamic therapy (aPDT). The aPDT effect is optimized at a poloxamer concentration just below the critical micellar concentration (CMC). We aimed to evaluate the effect of curcumin in the presence of 1% ethanol (EtOH) or dimethyl sulfoxide (DMSO) on PF127 micellization. These organic solvents are commonly used in topical preparations as a cosolvent or penetration enhancer (in the case of DMSO). The micellization process was investigated by UV-vis spectroscopy, dynamic light scattering (DLS), and differential scanning calorimetry (DSC). The micellization process of PF127 was slightly influenced by the addition of 1% EtOH or DMSO; however, the presence of 20 μM curcumin enhanced the effect. Micellization was favored in PBS compared to MilliQ water. Structures were formed between PF127 and curcumin at poloxamer concentrations ≥0.3 μM which facilitated solubilization of the photosensitizer. The optimal PF127 concentration required to solubilize 20 μM curcumin but avoid micellization was in the range 0.3 μM-0.04 mM in PBS in the presence of 1 % EtOH or DMSO. A careful consideration of the curcumin, cosolvents, and PF127 concentrations is required to enhance the curcumin solubility and prevent the PF127 micellization.

Poloxamer: A versatile tri-block copolymer for biomedical applications

Poloxamers, also called Pluronic, belong to a unique class of synthetic tri-block copolymers containing central hydrophobic chains of poly(propylene oxide) sandwiched between two hydrophilic chains of poly(ethylene oxide). Some chemical characteristics of poloxamers such as temperature-dependent self-assembly and thermo-reversible behavior along with biocompatibility and physiochemical properties make poloxamer-based biomaterials promising candidates for biomedical application such as tissue engineering and drug delivery. The microstructure, bioactivity, and mechanical properties of poloxamers can be tailored to mimic the behavior of various types of tissues. Moreover, their amphiphilic nature and the potential to self-assemble into the micelles make them promising drug carriers with the ability to improve the drug availability to make cancer cells more vulnerable to drugs. Poloxamers are also used for the modification of hydrophobic tissue-engineered constructs. This article collects the recent advances in design and application of poloxamer-based biomaterials in tissue engineering, drug/gene delivery, theranostic devices, and bioinks for 3D printing. STATEMENT OF SIGNIFICANCE: Poloxamers, also called Pluronic, belong to a unique class of synthetic tri-block copolymers containing central hydrophobic chains of poly(propylene oxide) sandwiched between two hydrophilic chains of poly(ethylene oxide). The microstructure, bioactivity, and mechanical properties of poloxamers can be tailored to mimic the behavior of various types of tissues. Moreover, their amphiphilic nature and the potential to self-assemble into the micelles make them promising drug carriers with the ability to improve the drug availability to make cancer cells more vulnerable to drugs. However, no reports have systematically reviewed the critical role of poloxamer for biomedical applications. Research on poloxamers is growing today opening new scenarios that expand the potential of these biomaterials from "traditional" treatments to a new era of tissue engineering. To the best of our knowledge, this is the first review article in which such issue is systematically reviewed and critically discussed in the light of the existing literature.

Alginate-poloxamer beads for clotrimazole delivery: Molecular interactions, mechanical properties, and anticandidal activity

Calcium alginate (CA) beads loaded with clotrimazole (CZ) were modified by adding poloxamer (PLX) in this study. Blends of PLX188 or PLX407 into sodium alginate (SA) dispersions caused a decrease in the SA zeta potential and led to viscosity synergism. SA with carboxyl and hydroxyl groups can interact with the hydroxyl groups of PLX via hydrogen bonding. A stronger interaction of SA with PLX407 was found when compared to the interaction between SA and PLX188. The PLX-CA beads gave a higher CZ entrapment efficiency than the CA beads. The highest PLX content used created an amorphous form of CZ in the beads because of the CZ solubilization by the PLX micelles. The addition of 0.5 or 1% w/v PLX can strengthen the CZ-loaded CA beads. Furthermore, the PLX-CA beads display a lower water uptake than the CA beads. PLX micellization can enhance CZ release and enhance the efficacy of CZ against Candida albicans. This study indicates that the molecular interaction of SA with PLX and the PLX micellization of CZ can improve the characteristics of CZ-loaded CA beads, which offer good potential for use as drug delivery systems or drug reservoirs in tablets for oral candidiasis.

A systematic evaluation of poloxamers as tablet lubricants

Lubricants are important for both preserving the tooling of high-speed tablet presses and attaining quality tablets. Magnesium stearate (MgSt) is most commonly used due to its superior lubrication efficiency; however, it can lead to negative effects on tabletability and dissolution. In this study, we have systematically evaluated two poloxamers, P188 and P407, for their suitability as alternative tablet lubricants. For two excipients with different mechanical properties, i.e., microcrystalline cellulose and lactose, both poloxamers exhibit acceptable lubrication efficiency without negatively impacting tabletability. Compared to 1% MgSt, the performance of 2% of both poloxamers in an experimental tablet formulation of ritonavir led to better lubrication, higher tabletability, and enhanced in vitro drug release. Thus, the use of P188 and P407 as alternative tablet lubricants deserves further evaluations.