Mechanism behind the Controlled Generation of Liquid Metal Nanoparticles by Mechanical Agitation

The size-controlled synthesis of liquid metal nanoparticles is necessary in a variety of applications. Sonication is a common method for breaking down bulk liquid metals into small particles, yet the influence of critical factors such as liquid metal composition has remained elusive. Our study employs high-speed imaging to unravel the mechanism of liquid metal particle formation during mechanical agitation. Gallium-based liquid metals, with and without secondary metals of bismuth, indium, and tin, are analyzed to observe the effect of cavitation and surface eruption during sonication and particle release. The impact of the secondary metal inclusion is investigated on liquid metals' surface tension, solution turbidity, and size distribution of the generated particles. Our work evidences that there is an inverse relationship between the surface tension and the ability of liquid metals to be broken down by sonication. We show that even for 0.22 at. % of bismuth in gallium, the surface tension is significantly decreased from 558 to 417 mN/m (measured in Milli-Q water), resulting in an enhanced particle generation rate: 3.6 times increase in turbidity and ∼43% reduction in the size of particles for bismuth in gallium liquid alloy compared to liquid gallium for the same sonication duration. The effect of particles' size on the photocatalysis of the annealed particles is also presented to show the applicability of the process in a proof-of-concept demonstration. This work contributes to a broader understanding of the synthesis of nanoparticles, with controlled size and characteristics, via mechanical agitation of liquid metals for diverse applications.

A Study of the Micellar Formation of N-Alkyl Betaine Ethyl Ester Chlorides Based on the Physicochemical Properties of Their Aqueous Solutions

In this study, a series of four surface-active compounds-N-alkyl betaine ethyl ester chlorides, CnBetC2Cl-were synthesized and characterized in aqueous solutions. As with other alkyl betaines, these amphiphiles can be practically used, for example, as co-surfactants and/or solubility enhancers acting according to hydrotropic or micellar mechanisms, depending on the alkyl chain length in the amine. We focused on the representatives of the medium alkyl chain length (C6-C12) to find the dependence between the alkyl chain length in N-alkyl betaine ethyl ester chlorides and the surface, volumetric, acoustic, and viscometric properties of their solutions. Ethyl esters, the derivatives of amino acids, were chosen to increase functionality and take advantage of possible hydrolysis in solutions at higher pH, which is also a key parameter in biodegradability. The micellization parameters were calculated based on the physicochemical characteristics. We focused our interest on the ester with a dodecyl substituent since we can compare and discuss its properties with some other C12 representatives that are available in literature. Surprisingly, its micellization characteristic is almost temperature-independent in the investigated temperature range, t = (15-45) °C. Particularly interesting are the results of dynamic light scattering (DLS), which show that the changes in physicochemical parameters of the C12 homolog around the CMC are caused by the two types of micelles of different sizes present in solutions.

Study on the Synthesis, Surface Activity, and Self-Assembly Behavior of Anionic Non-Ionic Gemini Surfactants

The use of surfactants in oil recovery can effectively improve crude oil recovery rate. Due to the enhanced salt and temperature resistance of surfactant molecules by non-ionic chain segments, anionic groups have good emulsifying stability. Currently, there are many studies on anionic non-ionic surfactants for oil recovery in China, but there is relatively little systematic research on introducing EOs into hydrophobic alkyl chains, especially on their self-assembly behavior. This article proposes a simple and effective synthesis method, using 3-aminopropane sulfonic acid, fatty alcohol polyoxyethylene ether, and epichlorohydrin as raw materials, to insert EO into hydrophobic alkyl chains and synthesize a series of new anionic non-ionic Gemini surfactants (CnEO-5, n = 8, 12, 16). The surface activity, thermodynamic properties, and self-assembly behavior of these surfactants were systematically studied through surface tension, conductivity, steady-state fluorescence probes, transmission electron microscopy, and molecular dynamics simulations. The surface tension test results show that CnEO-5 has high surface activity and is higher than traditional single chain surfactants and structurally similar anionic non-ionic Gemini surfactants. Additionally, thermodynamic parameters (e.g., ΔG°mic ΔH°mic ΔS°mic et al. indicate that CnEO-5 molecules are exothermic and spontaneous during the micellization process. DLS, p-values, and TEM results indicate that anionic non-ionic Gemini surfactants with shorter hydrophobic chains (such as C8EO-5) tend to form larger vesicles in aqueous solutions, which are formed in a tail to tail and staggered manner; Negative non-ionic Gemini surfactants with longer hydrophobic chains (such as C12EO-5, C16EO-5) tend to form small micelles. The test results indicate that CnEO-5 anionic non-ionic Gemini surfactants have certain application prospects in improving crude oil recovery.

Coalescence-Induced Self-Propelled Particle Transport with Asymmetry Arrangement

We experimentally investigated the coalescence-induced droplet-particle jumping phenomenon on a submillimeter scale in symmetric and asymmetric particle arrangements with poly(methyl methacrylate) (PMMA) particles and stainless steel (SS) particles. Coalescence-induced droplet-particle jumping exhibited excellent capability and interesting behavior for both droplet jumping enhancement and particle transport. The particle increased the normalized droplet jumping velocity from 0.250 for no particle case to 0.315 and 0.320 for symmetric and asymmetric particle cases. Compared with similar-sized macrostructures fixed between droplets, better jumping performance with particles may be attributed to avoiding the work of adhesion during droplet-macrostructure separation. Besides, all particles always sunk at the bottom in the symmetric cases, while the stick mode for PMMA particles and sink, wander, and jet modes for SS particles appeared in the asymmetry cases. We revealed that the asymmetric particle arrangement induces an unbalanced surface tension force, which may provide a driving force in the vertical direction. Additionally, a small enough resistive force caused by hydrophobic particles is another necessary condition for the wonder and jet mode. Finally, we realized a significantly superior particle transport in the asymmetric SS particle cases with maximum particle height reaching ∼2.1 mm, ∼12.4 times the particle radius, the most significant vertical self-propelled transport distance currently.

Mechanical Tester Driven by Surface Tension

The measurement of in-plane mechanical properties, such as Young's modulus and strength, of thin and stretchable materials has long been a challenge. Existing measurements, including wrinkle instability and nano indentation, are either indirect or destructive, and are inapplicable to meshes or porous materials, while the conventional tension test fails to measure the mechanical properties of nanoscale films. Here, we report a technique to test thin and stretchable films by loading a thin film afloat via differential surface tension and recording its deformation. We have demonstrated the method by measuring the Young's moduli of homogeneous films of soft materials including polydimethylsiloxane and Ecoflex and verified the results with known values. We further measured the strain distributions of meshes, both isotropic and anisotropic, which were otherwise nearly impossible to measure. The method proposed herein is expected to be generally applicable to many material systems that are thin, stretchable, and water-insoluble.

An experimental and modeling approach to describe the deactivation of cellulases at the air-liquid interface

Understanding the reaction mechanisms involved in the enzymatic hydrolysis of cellulose is important because it is kinetically the most limiting step of the bioethanol production process. The present work focuses on the enzymatic deactivation at the air-liquid interface, which is one of the aspects contributing to this global deactivation. This phenomenon has already been experimentally proven, but this is the first time that a model has been proposed to describe it. Experiments were performed by incubating Celluclast cocktail solutions on an orbital stirring system at different enzyme concentrations and different surface-to-volume ratios. A 5-day follow-up was carried out by measuring the global FPase activity of cellulases for each condition tested. The activity loss was proven to depend on both the air-liquid surface area and the enzyme concentration. Both observations suggest that the loss of activity takes place at the air-liquid surface, the total amount of enzymes varying with volume or enzyme concentration. Furthermore, tests performed using five individual enzymes purified from a Trichoderma reesei cocktail showed that the only cellulase that is deactivated at the air-liquid interface is cellobiohydrolase II. From the experimental data collected by varying the initial enzyme concentration and the ratio surface to volume, it was possible to develop, for the first time, a model that describes the loss of activity at the air-liquid interface for this configuration.

Dynamics of Microcystis surface scum formation under different wind conditions: the role of hydrodynamic processes at the air-water interface

Due to climate change, Microcystis blooms occur at increasing frequencies in aquatic ecosystems worldwide. Wind-generated turbulence is a crucial environmental stressor that can vertically disperse the Microcystis surface scum, reducing its light availability. Yet, the interactions of Microcystis scum with the wind-generated hydrodynamic processes, particularly those at the air-water interface, remain poorly understood. Here, we explore the response of Microcystis (including colony size and migration dynamics) to varying magnitudes and durations of intermittent wind disturbances in a mesocosm system. The flow velocities, size of Microcystis colonies, and the areal coverage of the water surface by scum were measured through video observations. Our results demonstrate that low wind speeds increase colony size by providing a stable condition where Microcystis forms a scum layer and aggregates into large colonies at the air-water interface. In contrast, wind disturbances disperse scum and generate turbulence, resulting in smaller colonies with higher magnitudes of wind disturbance. We observed that surface scum can form rapidly following a long period (6 h) of high-magnitude (4.5 m s-1) wind disturbance. Furthermore, our results indicate reduced water surface tension caused by the presence of Microcystis, which can decrease surface flow velocity and counteract wind-driven mixing. The reduced surface tension may also drive lateral convection at the water surface. These findings suggest that Microcystis reduces surface tension, likely by releasing surface-active materials, as an adaptive response to various wind conditions. This could result in an increased rate of surface scum re-formation under wind conditions and potentially facilitate the lateral expansion of scum patches during weak wind periods. This study reveals new insights into how Microcystis copes with different wind conditions and highlights the importance of the air-water interface for Microcystis scum dynamics.

Increasing the Adhesion of Bitumen to the Surface of Mineral Fillers through Modification with a Recycled Polymer and Surfactant Obtained from Oil Refining Waste

The purpose of this study was to optimize the processes of wetting fillers by varying the content of such additives as a surfactant and polymer in bitumen-mineral compositions in order to achieve optimal performance. The cosine of the contact angle was used as a criterion for assessing the adhesion of the bitumen binder to the surface of crushed stone. The effect of the additives' concentration on surface tension and adhesive efficiency in binary and ternary bitumen compositions was studied. The following chemicals were used as additives: the original product AS-1, industrial additive AMDOR-10, and used sealant AG-4I, a product based on polyisobutylene and petroleum oils. AS-1 was obtained from the oil refining waste in the laboratory of M. Kozybayev North Kazakhstan University. The ternary "bitumen-AG-4I-AS-1" composition provided a maximum decrease in the contact angle by 15.96° (gray crushed stone) and by 14.06° (red crushed stone) relative to original bitumen, providing better wettability of the mineral filler particles with the bitumen, and as a result, maximum adhesion between the bitumen and crushed stone. The optimal performance of the bitumen-mineral composition was recorded with the joint presence of additives in the bitumen: AS-1 at a level of 1.0 g/dm3 and AG-4I at a level of 1.0 g/dm3.

The Impact of Marangoni and Buoyancy Convections on Flow and Segregation Patterns during the Solidification of Fe-0.82wt%C Steel

Due to the high computational costs of the Eulerian multiphase model, which solves the conservation equations for each considered phase, a two-phase mixture model is proposed to reduce these costs in the current study. Only one single equation for each the momentum and enthalpy equations has to be solved for the mixture phase. The Navier-Stokes and energy equations were solved using the 3D finite volume method. The model was used to simulate the liquid-solid phase transformation of a Fe-0.82wt%C steel alloy under the effect of both thermocapillary and buoyancy convections. The alloy was cooled in a rectangular ingot (100 × 100 × 10 mm3) from the bottom cold surface to the top hot free surface by applying a heat transfer coefficient of h = 600 W/m2/K, which allows for heat exchange with the outer medium. The purpose of this work is to study the effect of the surface tension on the flow and segregation patterns. The results before solidification show that Marangoni flow was formed at the free surface of the molten alloy, extending into the liquid depth and creating polygonized hexagonal patterns. The size and the number of these hexagons were found to be dependent on the Marangoni number, where the number of convective cells increases with the increase in the Marangoni number. During solidification, the solid front grew in a concave morphology, as the centers of the cells were hotter; a macro-segregation pattern with hexagonal cells was formed, which was analogous to the hexagonal flow cells generated by the Marangoni effect. After full solidification, the segregation was found to be in perfect hexagonal shapes with a strong compositional variation at the free surface. This study illuminates the crucial role of surface-tension-driven Marangoni flow in producing hexagonal patterns before and during the solidification process and provides valuable insights into the complex interplay between the Marangoni flow, buoyancy convection, and solidification phenomena.

Synthesis and Modification of Polycarboxylate Superplasticizers-A Review

The molecular-scale structural changes in polycarboxylic superplasticizer (PCE) can influence dispersion and water retention. Polycarboxylate superplasticizer, synthesized using different methods, may alter dispersion and water-reducing effects. The synthesis of PCE involves creating a novel macromolecular monomer with a controllable molecular mass, adjustable lipophilic, and hydrophilic moieties, as outlined in this study. This article reviews processes for synthesizing polycarboxylates and identifies the optimal method through orthogonal experiments to produce a modified polycarboxylate superplasticizer (PCE-P). The study investigated the effects of different PCE types and concentrations on the surface tension, fluidity, and ζ potential of cement paste. PCE-P, synthesized at room temperature, showed comparable performances in initial hydration and conversion rate in cement to PCE synthesized at high temperatures. PCE-P exhibited an increased slump but had a wider molecular weight distribution and longer main and side chains, leading to a 24.04% decrease in surface tension, indicating a good dispersibility.

Evaluating Novel SP-B and SP-C Synthetic Analogues for Pulmonary Surfactant Efficacy

Pulmonary surfactants, a complex assembly of phospholipids and surfactant proteins such as SP-B and SP-C, are critical for maintaining respiratory system functionality by lowering surface tension (ST) and preventing alveolar collapse. Our study introduced five synthetic SP-B peptides and one SP-C peptide, leading to the synthesis of CHAsurf candidates (CHAsurf-1 to CHAsurf-5) for evaluation. We utilized a modified Wilhelmy balance test to assess the surface tension properties of the surfactants, measuring spreading rate, surface adsorption, and ST-area diagrams to comprehensively evaluate their performance. Animal experiments were performed on New Zealand white rabbits to test the efficacy of CHAsurf-4B, a variant chosen for its economic viability and promising ST reduction properties, comparable to Curosurf®. The study confirmed that higher doses of SP-B in CHAsurf-4 are associated with improved ST reduction. However, due to cost constraints, CHAsurf-4B was selected for in vivo assessment. The animal model revealed that CHAsurf-4B could restore alveolar structure and improve lung elasticity, akin to Curosurf®. Our research highlights the significance of cysteine residues and disulfide bonds in the structural integrity and function of synthetic SP-B analogues, offering a foundation for future surfactant therapy in respiratory disorders. This study's findings support the potential of CHAsurf-4B as a therapeutic agent, meriting further investigation to solidify its role in clinical applications.

Mechanistic Insights into the Adsorption of Monoclonal Antibodies at the Water/Vapor Interface

Monoclonal antibodies (mAbs) are active components of therapeutic formulations that interact with the water-vapor interface during manufacturing, storage, and administration. Surface adsorption has been demonstrated to mediate antibody aggregation, which leads to a loss of therapeutic efficacy. Controlling mAb adsorption at interfaces requires a deep understanding of the microscopic processes that lead to adsorption and identification of the protein regions that drive mAb surface activity. Here, we report all-atom molecular dynamics (MD) simulations of the adsorption behavior of a full IgG1-type antibody at the water/vapor interface. We demonstrate that small local changes in the protein structure play a crucial role in promoting adsorption. Also, interfacial adsorption triggers structural changes in the antibody, potentially contributing to the further enhancement of surface activity. Moreover, we identify key amino acid sequences that determine the adsorption of antibodies at the water-air interface and outline strategies to control the surface activity of these important therapeutic proteins.

Development of Cholinium-Based API Ionic Liquids with Enhanced Drug Solubility: Biological Evaluation and Interfacial Properties

We report an efficient sustainable two-step anion exchange synthetic procedure for the preparation of choline API ionic liquids (Cho-API-ILs) that contain active pharmaceutical ingredients (APIs) as anions combined with choline-based cations. We have evaluated the in vitro cytotoxicity for the synthesized compounds using three different cells lines, namely, HEK293 (normal kidney cell line), SW480, and HCT 116 (colon carcinoma cells). The solubility of APIs and Cho-API-ILs was evaluated in water/buffer solutions and was found higher for Cho-API-ILs. Further, we have investigated the antimicrobial potential of the pure APIs, ILs, and Cho-API-ILs against clinically relevant microorganisms, and the results demonstrated the promise of Cho-API-ILs as potent antimicrobial agents to treat bacterial infections. Moreover, the aggregation and adsorption properties of the Cho-API-ILs were observed by using a surface tension technique. The aggregation behavior of these Cho-API-ILs was further supported by conductivity and pyrene probe fluorescence. The thermodynamics of aggregation for Cho-API-ILs has been assessed from the temperature dependence of surface tension. The micellar size and their stability have been studied by dynamic light scattering, transmission electron microscopy, and zeta potential. Therefore, the duality in the nature of Cho-API-ILs has been explored with the upgradation of their physical, chemical, and biopharmaceutical properties, which enhance the opportunities for advances in pharmaceutical sciences.

Pulmonary Surfactant Homeostasis Dysfunction Mediates Multiwalled Carbon Nanotubes Induced Lung Fibrosis via Elevating Surface Tension

Multiwalled carbon nanotubes (MWCNTs) have been widely used in many disciplines and raised great concerns about their negative health impacts, especially environmental and occupational exposure. MWCNTs have been reported to induce fibrotic responses; however, the underlying mechanisms remain largely veiled. Here, we reported that MWCNTs inhalation induced lung fibrosis together with decreased lung compliance, increased elastance in the mice model, and elevated surface tension in vitro. Specifically, MWCNTs increased surface tension by impairing the function of the pulmonary surfactant. Mechanistically, MWCNTs induced lamellar body (LB) dysfunction through autophagy dysfunction, which then leads to surface tension elevated by pulmonary surfactant dysfunction in the context of lung fibrosis. This is a study to investigate the molecular mechanism of MWCNTs-induced lung fibrosis and focus on surface tension. A direct mechanistic link among impaired LBs, surface tension, and fibrosis has been established. This finding elucidates the detailed molecular mechanisms of lung fibrosis induced by MWCNTs. It also highlights that pulmonary surfactants are expected to be potential therapeutic targets for the prevention and treatment of lung fibrosis induced by MWCNTs.

Study on the Performance Mechanism of Polyformaldehyde Glycol Ether Polymer for Crude Oil Recovery Enhancement

The demand for energy continues to increase as the global economy continues to grow. The role of oilfield chemicals in the process of oil and gas exploration, development, and production is becoming more and more important, and the demand is rising year by year. The support of national policies and the formulation of environmental protection regulations have put forward higher requirements for oilfield chemical products, which has promoted the innovative research and development and market application of oilfield chemicals. Polyformaldehyde glycol ether polymer (PGEP) is simple to synthesize, easily biodegradable, green and environmentally friendly, and in line with the development trend of chemicals used in oil and gas development. The interfacial tension performance of PGEP after compounding with different surfactants can reach as low as 0.00034 mN/m, which meets the requirements of the oilfield (interfacial tension ≤ 5 × 10-3 mN/m). The best oil washing efficiency performance of PGEP compounded with different surfactants reached 78.2%, which meets the requirements of the oilfield (oil washing efficiency ≥ 40%). The fracturing fluid drainage efficiency of PGEP after compounding with different surfactants reaches 22%, which meets the requirements of the oilfield (drainage efficiency ≥ 15%). The surface interfacial tension of the system remains constant after the concentration exceeds 0.2% and decreases with lower concentrations. The drainage efficiency increases with increasing concentrations in the range below 0.6%. It was determined that PGEP can be used as a surfactant instead of fatty-alcohol ethoxylates (FAE) in oilfield development.

Interfacial Rheological Study of β-Casein/Pectin Mixtures at the Air/Water Interface

Colloidal food products, such as emulsions, foams, gels, and dispersions, are complex systems that need the presence of stabilizing agents to enable their formation and provide stability. Proteins are often used for food foams and emulsions because of their ability to lower interfacial tension and make viscoelastic interfaces. Generally, to improve the resistance against rupture, polysaccharides are used in association with the proteins. Pectin is a complex polysaccharide that can help to stabilize foams or emulsions. This work aims at studying the mechanical resistance of the interface formed by mixtures of β-casein and pectin at high and low methoxylation degrees at the air/water interface using dilatational and shear kinematics. Frequency sweep tests, in the linear region, were performed in shear at different aging times and in dilatational mode, and the rheological data were analyzed. The transient data of the surface tension were analyzed by kinetic models to obtain the characteristic rates of the interfacial phenomena. The kinetic mechanisms of the protein/pectin mixed systems are controlled by protein and show a weak gel behavior for short aging times. The interfaces obtained with both pectins in a mixture with β-casein evolved with time, gelling and showing a solid-like behavior at concentrations of 1 and 10 g/L and after 3.5 h of aging time. The interfacial shear trend obtained suggests a good stabilizing effect of the pectins from citrus with long aging times.

Interaction between Sophorolipids and β-glucan in Aqueous Solutions

Skin disorders, including acne vulgaris, atopic dermatitis, and rosacea, are characterized by the presence of biofilms, which are communities of microorganisms. The mechanical stability of biofilms is attributed to one of their constituents-polysaccharides-which are secreted by microorganisms. Sophorolipids are biosurfactants with biofilm disruption and removal abilities and are expected to become alternatives for classical petrochemical-based surfactants in cosmetics. In this study, we investigated the influence of sophorolipids on β-glucan such as dispersion status, interaction mechanism, and configuration change as a model polysaccharide of biofilm in aqueous solution. Dynamic light scattering measurements showed that sophorolipids interfere with the aggregation of β- glucan in aqueous solutions. In contrast, sodium dodecyl sulfate (SDS), which is used as a typical surfactant reference, promotes the aggregation of β-glucan. The interaction between sophorolipids and β-glucan were investigated using surface tension measurements and isothermal titration calorimetry (ITC). Surface tension increased only near critical micelle concentration (CMC) region of sophorolipids in the presence of β-glucan. This suggests that the interaction occurred in the solution rather than at the air-liquid interface. Moreover, the results of ITC indicate that hydrophobic interactions were involved in this interaction. In addition, the results of optical rotation measurements indicate that sophorolipids did not unfold the triple helical structure of β-glucan. β-glucan dispersion was expected to be caused steric hindrance and electrostatic repulsion when sophorolipids interacted with β-glucan via hydrophobic interactions owing to the unique molecular structure of sophorolipids attributed by a bulky sugar moiety and a carboxyl functional group. These results demonstrated unique performances of sophorolipids on β-glucan and provided more insights on the efficacy of sophorolipids as good anti-biofilms.

Liquid Metal Actuators: A Comparative Analysis of Surface Tension Controlled Actuation

Liquid metals, with their unique combination of electrical and mechanical properties, offer great opportunities for actuation based on surface tension modulation. Thanks to the scaling laws of surface tension, which can be electrochemically controlled at low voltages, liquid metal actuators stand out from other soft actuators for their remarkable characteristics such as high contractile strain rates and higher work densities at smaller length scales. This review summarizes the principles of liquid metal actuators and discusses their performance as well as theoretical pathways toward higher performances. The objective is to provide a comparative analysis of the ongoing development of liquid metal actuators. The design principles of the liquid metal actuators are analyzed, including low-level elemental principles (kinematics and electrochemistry), mid-level structural principles (reversibility, integrity, and scalability), and high-level functionalities. A wide range of practical use cases of liquid metal actuators from robotic locomotion and object manipulation to logic and computation is reviewed. From an energy perspective, strategies are compared for coupling the liquid metal actuators with an energy source toward fully untethered robots. The review concludes by offering a roadmap of future research directions of liquid metal actuators.

Comparative Study of Latanoprost Drug Delivery Systems for Glaucoma Treatment and Their Interaction with the Tear Film Lipid Layer Models

This study investigates the interaction of two approved and one newly developed latanoprost formulation with in vitro and in silico models of the tear film and tear film lipid layer (TFLL). Latanoprost, a prostaglandin analogue used for intraocular elevated pressure treatment, is topically delivered by nanocarriers within aqueous solutions or emulsions. The study focuses on the impact of these carriers on drug interactions with the tear film and their effect on the TFLL. Three different types of latanoprost carriers, micellar, nanoemulsion, and polymer-based, were compared, and each revealed distinct interaction patterns with the TFLL. Surface pressure kinetics demonstrated a rapid increase for the benzalkonium chloride formulation and a slow rise for the preservative-free variants. Visualization of the acellular in vitro TFLL model revealed different patterns of incorporation for each formulation, indicating unique interaction mechanisms. Molecular dynamics simulations further revealed different mechanisms of drug release in the TFLL between micellar and nanoemulsion formulations. In-depth examination highlighted the role of triglyceride molecules in replenishing the nonpolar layer of the TFLL, which suggests potential improvements in ocular surface compatibility by adjusting the quality and concentration of the oily phase. These findings suggest the potential for optimizing latanoprost formulations by tuning the oily phase-to-surfactant ratio and selecting suitable surfactants.

Combined Activity of Saponin B Isolated from Dodonaea viscosa Seeds with Pesticide Azadirachtin against the Pest Spodoptera litura

Azadirachtin is regarded as one of the best botanical pesticides due to its broad spectrum of insecticides and low interference with natural enemies. To enhance the effect of azadirachtin and slow down the generation of resistance, the combined activity was studied. Here, we found that Dodonaea viscosa saponin B (DVSB) isolated from the seeds of Dodonaea viscosa has good combined activity with the azadirachtin. The mixture of DVSB and azadirachtin in a volume ratio of 1:4 had the strongest combined effect against Spodoptera litura, with a co-toxicity coefficient (CTC) of 212.87. DVSB exerted its combined activity by affecting the contact angle, surface tension, maximum retention and cell membrane permeability. When mixed with DVSB, the contact angle and surface tension decreased by 30.38% and 23.68%, and the maximum retention increased by 77.15%. DVSB was screened as an effective combined activity botanical compound of azadirachtin upon the control of S. litura and highlights the potential application of botanical compounds as pesticide adjuvants in the pest management.

Phospholipid Molecular Layer that Enhances Distinction of Odors Based on Artificial Sniffing

We propose a novel odor-sensing system based on the dynamic response of phospholipid molecular layers for artificial olfaction. Organisms obtain information about their surroundings based on multidimensional information obtained from sniffing, i.e., periodic perturbations. Semiconductor- and receptor-based odor sensors have been developed previously. However, these sensors predominantly identify odors based on one-dimensional information, which limits the type of odor molecule they can identify. Therefore, the development of odor sensors that mimic the olfactory systems of living organisms is useful to overcome this limitation. In this study, we developed a novel odor-sensing system based on the dynamics of phospholipids that responds delicately to chemical substances at room temperature using multidimensional information obtained from periodic perturbations. Odor molecules are periodically supplied to the phospholipid molecular layer as an input sample. The waveform of the surface tension of the phospholipid molecular layer changes depending on the odor molecules and serves as an output. Such characteristic responses originating from the dynamics of odor molecules on the phospholipid molecular layer can be reproduced numerically. The phospholipid molecular layer amplified the information originating from the odor molecule, and the mechanism was evaluated by using surface pressure-area isotherms. This paper offers a platform for an interface-chemistry-based artificial sniffing system as an active sensor and a novel olfactory mechanism via physicochemical responses of the receptor-independent membranes of the organism.

A Review on the Coalescence of Confined Drops with a Focus on Scaling Laws for the Growth of the Liquid Bridge

The surface-tension-driven coalescence of drops has been extensively studied because of the omnipresence of the phenomenon and its significance in various natural and engineering systems. When two drops come into contact, a liquid bridge is formed between them and then grows in its lateral dimensions. As a result, the two drops merge to become a bigger drop. The growth dynamics of the bridge are governed by a balance between the driving force and the viscous and inertial resistances of involved liquids, and it is usually represented by power-law scaling relations on the temporal evolution of the bridge dimension. Such scaling laws have been well-characterized for the coalescence of unconfined or freely suspended drops. However, drops are often confined by solid or liquid surfaces and thus are a different shape from spheres, which affects their coalescence dynamics. As such, the coalescence of confined drops poses more complicated interfacial fluid dynamics challenges compared to that of unconfined drops. Although there have been several studies on the coalescence of confined drops, they have not been systematically reviewed in terms of the properties and geometry of the confining surface. Thus, we aim to review the current literature on the coalescence of confined drops in three categories: drop coalescence on a solid surface, drop coalescence on a deformable surface, and drop coalescence between two parallel surfaces with a small gap (i.e., Hele-Shaw cell), with a focus on power-law scaling relations, and to suggest challenges and outlooks for future research on the phenomena.

Droplet Manipulation on Lubricant Self-Mediating Slippery PDMS Films

Further exploration is needed for sustainable and precise droplet manipulation on intelligent surfaces, especially the problem of SLIPS failure caused by lubricant loss. In this work, a self-mediating photothermal lubrication surface was designed. Through a simple preparation method, it was possible to generate a new lubrication layer through near-infrared light (NIL) and perform sustainable and precise droplet manipulation even after the surface lubricant was consumed. The thermal expansion film obtained from polydimethylsiloxane (PDMS) and nano ferric oxide, combined with the connected structure obtained through laser etching technology, effectively preserve lubricating oil. After the surface lubricating oil is consumed, under the action of NIL, the lubricating oil inside the film is squeezed out, forming a new lubricating layer. At the same time, programmable droplet transport can be achieved by inducing the direction of NIL. After turning off NIL, the lubricating oil is absorbed into the network structure, achieving good circulation. This not only reduces the loss of lubricating oil, but also facilitates the manipulation of droplets. In addition, the movement (plane and antigravity) and splitting behavior of droplets are also discussed. This sustainable and precise manipulation of liquid droplets on the LSSPF (lubricant self-mediating slippery PDMS films) surface can be widely applied in various micro reaction devices.

Machine learning (ML)-assisted surface tension and oscillation-induced elastic modulus studies of oxide-coated liquid metal (LM) alloys

Pendant drops of oxide-coated high-surface tension fluids frequently produce perturbed shapes that impede interfacial studies. Eutectic gallium indium or Galinstan are high-surface tension fluids coated with a ∼5 nm gallium oxide (Ga2O3) film and falls under this fluid classification, also known as liquid metals (LMs). The recent emergence of LM-based applications often cannot proceed without analyzing interfacial energetics in different environments. While numerous techniques are available in the literature for interfacial studies- pendant droplet-based analyses are the simplest. However, the perturbed shape of the pendant drops due to the presence of surface oxide has been ignored frequently as a source of error. Also, exploratory investigations of surface oxide leveraging oscillatory pendant droplets have remained untapped. We address both challenges and present two contributing novelties- (a) by utilizing the machine learning (ML) technique, we predict the approximate surface tension value of perturbed pendant droplets, (ii) by leveraging the oscillation-induced bubble tensiometry method, we study the dynamic elastic modulus of the oxide-coated LM droplets. We have created our dataset from LM's pendant drop shape parameters and trained different models for comparison. We have achieved >99% accuracy with all models and added versatility to work with other fluids. The best-performing model was leveraged further to predict the approximate values of the nonaxisymmetric LM droplets. Then, we analyzed LM's elastic and viscous moduli in air, harnessing oscillation-induced pendant droplets, which provides complementary opportunities for interfacial studies alternative to expensive rheometers. We believe it will enable more fundamental studies of the oxide layer on LM, leveraging both symmetric and perturbed droplets. Our study broadens the materials science horizon, where researchers from ML and artificial intelligence domains can work synergistically to solve more complex problems related to surface science, interfacial studies, and other studies relevant to LM-based systems.

Constrained drop surfactometry for studying adsorbed pulmonary surfactant at physiologically relevant high concentrations

Exogenous surfactant therapy has been used as a standard clinical intervention for treating premature newborns with respiratory distress syndrome. The phospholipid concentrations of exogenous surfactants used in clinical practice are consistently higher than 25 mg/mL; while it was estimated that the phospholipid concentration of endogenous surfactant is approximately in the range between 15 and 50 mg/mL. However, most in vitro biophysical simulations of pulmonary surfactants were only capable of studying surfactant concentrations up to 3 mg/mL, one order of magnitude lower than the physiologically relevant concentration. Using a new in vitro biophysical model, called constrained drop surfactometry, in conjunction with atomic force microscopy and other technological advances, we have investigated the biophysical properties, ultrastructure, and topography of the pulmonary surfactant film adsorbed from the subphase at physiologically relevant high surfactant concentrations of 10-35 mg/mL. It was found that the effect of surfactant concentration on the dynamic surface activity of the surfactant film was only important when the surface area of the surfactant film varied no more than 15%, mimicking normal tidal breathing. The adsorbed surfactant film depicts a multilayer conformation consisting of a layer-by-layer assembly of stacked bilayers with the height of the multilayers proportional to the surfactant concentration. Our experimental data suggest that the biophysical function of these multilayer structures formed after de novo adsorption is to act as a buffer zone to store surface-active materials ejected from the interfacial monolayer under extreme conditions such as deep breathing.NEW & NOTEWORTHY An in vitro biophysical model, called constrained drop surfactometry, was developed to study the biophysical properties, ultrastructure, and topography of the pulmonary surfactant film adsorbed from the subphase at physiologically relevant high surfactant concentrations of 10-35 mg/mL. These results suggest that the biophysical function of multilayers formed after de novo adsorption is to act as a buffer zone to store surface-active materials ejected from the interfacial monolayer under extreme conditions such as deep breathing.

Understanding the Buoy Effect of Surface-Enriched Pt Complexes in Ionic Liquids: A Combined ARXPS and Pendant Drop Study

Recently, we demonstrated that Pt catalyst complexes dissolved in the ionic liquid (IL) [C4 C1 Im][PF6 ] can be deliberately enriched at the IL surface by introducing perfluorinated substituents, which act like buoys dragging the metal complex towards the surface. Herein, we extend our previous angle-resolved X-ray photoelectron spectroscopy (ARXPS) studies at complex concentrations between 30 and 5 %mol down to 1 %mol and present complementary surface tension pendant drop (PD) measurements under ultraclean vacuum conditions. This combination allows for connecting the microscopic information on the IL/gas interface derived from ARXPS with the macroscopic property surface tension. The surface enrichment of the Pt complexes is found to be most pronounced at 1 %mol . It also displays a strong temperature dependence, which was not observed for 5 %mol and above, where the surface is already saturated with the complex. The surface enrichment deduced from ARXPS is also reflected by the pronounced decrease in surface tension with increasing concentration of the catalyst. We furthermore observe by ARXPS and PD a much stronger surface affinity of the buoy-complex as compared to the free ligands in solution. Our results are highly interesting for an optimum design of IL-based catalyst systems with large contact areas to the surrounding reactant/product phase, such as in supported IL phase (SILP) catalysis.

Evidence of Small Fungal Cysteine-Rich Proteins Acting as Biosurfactants and Self-Assembling into Large Fibers

Fungi produce surface-active proteins, among which hydrophobins are the most characterized and attractive also for their ability to form functional amyloids. Our most recent findings show that these abilities are shared with other classes of fungal proteins. Indeed, in this paper, we compared the characteristics of a class I hydrophobin (Vmh2 from Pleurotus ostreatus) and an unknown protein (named PAC3), extracted from the marine fungal strain Acremonium sclerotigenum, which does not belong to the same protein family based on its sequence features. They both proved to be good biosurfactants, stabilizing emulsions in several conditions (concentration, pH, and salinity) and decreasing surface tension to a comparable value to that of some synthetic surfactants. After that, we observed for both Vmh2 and PAC3 the formation of giant fibers without the need for harsh conditions or long incubation time, a remarkable ability herein reported for the first time.

Effects of Charged Surfactants on Interfacial Water Structure and Macroscopic Properties of the Air-Water Interface

Surfactants are used to control the macroscopic properties of the air-water interface. However, the link between the surfactant molecular structure and the macroscopic properties remains unclear. Using sum-frequency generation spectroscopy and molecular dynamics simulations, two ionic surfactants (dodecyl trimethylammonium bromide, DTAB, and sodium dodecyl sulphate, SDS) with the same carbon chain lengths and charge magnitude (but different signs) of head groups interact and reorient interfacial water molecules differently. DTAB forms a thicker but sparser interfacial layer than SDS. It is due to the deep penetration into the adsorption zone of Br- counterions compared to smaller Na+ ones, and also due to the flip-flop orientation of water molecules. SDS alters two distinctive interfacial water layers into a layer where H+ points to the air, forming strong hydrogen bonding with the sulphate headgroup. In contrast, only weaker dipole-dipole interactions with the DTAB headgroup are formed as they reorient water molecules with H+ point down to the aqueous phase. Hence, with more molecules adsorbed at the interface, SDS builds up a higher interfacial pressure than DTAB, producing lower surface tension and higher foam stability at a similar bulk concentration. Our findings offer improved knowledge for understanding various processes in the industry and nature.

Surface tension-induced biomimetic assembly of cell-laden fibrous bundle construct for muscle tissue engineering

The field of tissue engineering has been long seeking to develop functional muscle tissue that closely resembles natural muscle. This study used a bio-inspired assembly based on the surface tension mechanism to develop a novel method for engineering muscle tissue. This approach enabled uniaxially ordered electrospun fibers to naturally collide into an aligned bundle without the need for manual handling, thereby reducing cell damage during the cell culture procedure. During the assembly procedure, C2C12 myoblasts were cultured in a viscous collagen hydrogel that caused wetting while providing adequate structural stability for the cell-fiber construct. In addition, gene expression analysis of the resulting muscle-like fibril bundle revealed improved myogenic differentiation. These findings highlight the potential of using a collagen hydrogel and the surface tension mechanism to construct biologically relevant muscle tissue, offering a promising strategy that may outperform existing approaches. Overall, this study contributes to the development of advanced tissue engineering methods and brings us a step closer to creating functional muscle tissue for therapeutic and regenerative medicine applications.

Surface Tension and Neuronal Sorting in Magnetically Engineered Brain-Like Tissue

Engineered 3D brain-like models have advanced the understanding of neurological mechanisms and disease, yet their mechanical signature, while fundamental for brain function, remains understudied. The surface tension for instance controls brain development and is a marker of cell-cell interactions. Here, 3D magnetic brain-like tissue spheroids composed of intermixed primary glial and neuronal cells at different ratios are engineered. Remarkably, the two cell types self-assemble into a functional tissue, with the sorting of the neuronal cells toward the periphery of the spheroids, whereas the glial cells constitute the core. The magnetic fingerprint of the spheroids then allows their deformation when placed under a magnetic field gradient, at a force equivalent to a 70 g increased gravity at the spheroid level. The tissue surface tension and elasticity can be directly inferred from the resulting deformation, revealing a transitional dependence on the glia/neuron ratio, with the surface tension of neuronal tissue being much lower. The results suggest an underlying mechanical contribution to the exclusion of the neurons toward the outer spheroid region, and depict the glia/neuron organization as a sophisticated mechanism that should in turn influence tissue development and homeostasis relevant in the neuroengineering field.

Investigation of the Effects of Polyurethane-Modified Polycarboxylate at Ambient Temperature on the Characteristics of Cement with Supplementary Cementitious Materials

Via radical polymerization, three polyurethane-modified polycarboxylate molecules of various comb topologies were synthesized. This study investigated the effects of varying types and concentrations of supplementary cementitious materials (SCMs) on the surface tension, flowability, and zeta potential of cement. An elevation in the molar ratio between isoamyl alcohol polyoxyethylene (TPEG) and acrylic acid (AA) from 1:1 to 5:1 reduced the surface tension of the polycarboxylate molecule from 47.70 mN/m to 35.53 mN/m and increased flowability from 280 mm to 310 mm, as the results indicated. An increase in the SCM and polycarboxylate dosage proportionally decreased liquid-phase surface tension and increased flowability. A decrease in the water-to-cement (w/c) ratio from 0.5 to 0.3 corresponded to an observed increase in the zeta potential of cement pastes. However, a rise in the quantity of polycarboxylate and SCMs corresponded to a decrease in the zeta potential at a w/c ratio of 0.3.

Biophysical function of pulmonary surfactant in liquid ventilation

Liquid ventilation is a mechanical ventilation technique in which the entire or part of the lung is filled with oxygenated perfluorocarbon (PFC) liquids rather than air in conventional mechanical ventilation. Despite its many ideal biophysicochemical properties for assisting liquid breathing, a general misconception about PFC is to use it as a replacement for pulmonary surfactant. Because of the high PFC-water interfacial tension (59 mN/m), pulmonary surfactant is indispensable in liquid ventilation to increase lung compliance. However, the biophysical function of pulmonary surfactant in liquid ventilation is still unknown. Here, we have studied the adsorption and dynamic surface activity of a natural surfactant preparation, Infasurf, at the PFC-water interface using constrained drop surfactometry. The constrained drop surfactometry is capable of simulating the intra-alveolar microenvironment of liquid ventilation under physiologically relevant conditions. It was found that Infasurf adsorbed to the PFC-water interface reduces the PFC-water interfacial tension from 59 mN/m to an equilibrium value of 9 mN/m within seconds. Atomic force microscopy revealed that after de novo adsorption, Infasurf forms multilayered structures at the PFC-water interface with an average thickness of 10-20 nm, depending on the adsorbing surfactant concentration. It was found that the adsorbed Infasurf film is capable of regulating the interfacial tension of the PFC-water interface within a narrow range, between ∼12 and ∼1 mN/m, during dynamic compression-expansion cycles that mimic liquid ventilation. These findings have novel implications in understanding the physiological and biophysical functions of the pulmonary surfactant film at the PFC-water interface, and may offer new translational insights into the development of liquid ventilation and liquid breathing techniques.

Physical forces guide curvature sensing and cell migration mode bifurcating

The ability of cells to sense and adapt to curvy topographical features has been implicated in organ morphogenesis, tissue repair, and tumor metastasis. However, how individual cells or multicellular assemblies sense and differentiate curvatures remains elusive. Here, we reveal a curvature sensing mechanism in which surface tension can selectively activate either actin or integrin flows, leading to bifurcating cell migration modes: focal adhesion formation that enables cell crawling at convex front edges and actin cable assembly that pulls cells forward at concave front edges. The molecular flows and curved front morphogenesis are sustained by coordinated cellular tension generation and transmission. We track the molecular flows and mechanical force transduction pathways by a phase-field model, which predicts that multicellular curvature sensing is more efficient than individual cells, suggesting collective intelligence of cells. The unique ability of cells in curvature sensing and migration mode bifurcating may offer insights into emergent collective patterns and functions of living active systems at different length scales.

Comparative Biophysical Study of Meibomian Lipids of Wild Type and Soat1-Null Mice: Implications to Meibomian Gland Dysfunction and Dry Eye Disease

Purpose

The biophysical roles of Meibomian lipids (MLs) played in health and meibomian gland dysfunction (MGD) are still unclear. The purpose of this research is to establish the composition-structure-functional correlations of the ML film (MLF) using Soat1-null mice and comprehensive in vitro biophysical simulations.

Methods

MLs were extracted from tarsal plates of wild type (WT) and Soat1 knockout (KO) mice. The chemical composition of ML samples was characterized using liquid chromatography - mass spectrometry. Comprehensive biophysical studies of the MLFs, including their dynamic surface activity, interfacial rheology, evaporation resistance, and ultrastructure and topography, were performed with a novel experimental methodology called the constrained drop surfactometry.

Results

Soat1 inactivation caused multiple alternations in the ML profile. Compared to their WT siblings, the MLs of KO mice were completely devoid of cholesteryl esters (CEs) longer than C18 to C20, but contained 7 times more free cholesterol (Chl). Biophysical assays consistently suggested that the KO-MLF became stiffer than that of WT mice, revealed by reduced film compressibility, increased elastic modulus, and decreased loss tangent, thus causing more energy loss per blinking cycle of the MLF. Moreover, the KO mice showed thinning of their MLF, and reduced evaporation resistance.

Conclusions

These findings delineated the composition-structure-functional correlations of the MLF and suggested a potential biophysical function of long-chain CEs in optimizing the surface activity, interfacial rheology, and evaporation resistance of the MLF. This study may provide novel implications to pathophysiological and translational understanding of MGD and dry eye disease.

Quantification of Surface Tension Effects and Nucleation-and-Growth Rates during Self-Assembly of Biological Condensates

Liquid-solid and liquid-liquid phase separation (PS) drives the formation of functional and disease-associated biological assemblies. Principles of phase equilibrium are here employed to derive a general kinetic solution that predicts the evolution of the mass and size of biological assemblies. Thermodynamically, protein PS is determined by two measurable concentration limits: the saturation concentration and the critical solubility. Due to surface tension effects, the critical solubility can be higher than the saturation concentration for small, curved nuclei. Kinetically, PS is characterized by the primary nucleation rate constant and a combined rate constant accounting for growth and secondary nucleation. It is demonstrated that the formation of a limited number of large condensates is possible without active mechanisms of size control and in the absence of coalescence phenomena. The exact analytical solution can be used to interrogate how the elementary steps of PS are affected by candidate drugs.

Purification effects show seed and root mucilage's ability to respond to changing rhizosphere conditions

Mucilage, a polysaccharide-containing hydrogel, is hypothesized to play a key role in the rhizosphere as a self-organized system because it may vary its supramolecular structure with changes in the surrounding solution. However, there is currently limited research on how these changes are reflected in the physical properties of real mucilage. This study examines the role of solutes in maize root, wheat root, chia seed, and flax seed mucilage in relation to their physical properties. Two purification methods, dialysis and ethanol precipitation, were applied to determine the purification yield, cation content, pH, electrical conductivity, surface tension, viscosity, transverse 1 H relaxation time, and contact angle after drying of mucilage before and after purification. The two seed mucilage types contain more polar polymers that are connected to larger assemblies via multivalent cation crosslinks, resulting in a denser network. This is reflected in higher viscosity and water retention ability compared to root mucilage. Seed mucilage also contains fewer surfactants, making them better wettable after drying compared to the two root mucilage types. The root mucilage types, on the other hand, contain smaller polymers or polymer assemblies and become less wettable after drying. However, wettability not only depends on the amount of surfactants but also on their mobility, as well as the strength and mesh size of the network structure. The changes in physical properties and cation composition observed after ethanol precipitation and dialysis suggest that the polymer network of seed mucilage is more stable and specialized in protecting the seeds from unfavorable environmental conditions. In contrast, root mucilage is characterized by fewer cationic interactions and its network relies more on hydrophobic interactions. This allows root mucilage to be more flexible in responding to changing environmental conditions, facilitating nutrient and water exchange between root surfaces and the rhizosphere soil.

Not the Usual Suspects: Alternative Surfactants for Biopharmaceuticals

Therapeutically relevant proteins naturally adsorb to interfaces, causing aggregation which in turn potentially leads to numerous adverse consequences such as loss of activity or unwanted immunogenic reactions. Surfactants are ubiquitously used in biotherapeutics drug development to oppose interfacial stress, yet, the choice of the surfactant is extremely limited: to date, only polysorbates (PS20/80) and poloxamer 188 are used in commercial products. However, both surfactant families suffer from severe degradation and impurities of the raw material, which frequently increases the risk of particle generation, chemical protein degradation, and potential adverse immune reactions. Herein, we assessed a total of 40 suitable alternative surfactant candidates and subsequently performed a selection through a three-gate screening process employing four protein modalities encompassing six different formulations. The screening is based on short-term agitation-induced aggregation studies coupled to particle analysis and surface tension characterization, followed by long-term quiescence stability studies connected to protein purity measurements and particle analysis. The study concludes by assessing the surfactant's chemical and enzymatic degradation propensity. The candidates emerging from the screening are de novo α-tocopherol-derivatives named VEDG-2.2 and VEDS, produced ad hoc for this study. They display protein stabilization potential comparable or better than polysorbates together with an increased resistance to chemical and enzymatic degradation, thus representing valuable alternative surfactants for biotherapeutics.

Bubble-Mediated Large-Scale Hierarchical Assembly of Ultrathin Pt Nanowire Network Monolayer at Gas/Liquid Interfaces

Extensive macroscale two-dimensional (2-D) platinum (Pt) nanowire network (NWN) sheets are created through a hierarchical self-assembly process with the aid of biomolecular ligands. The Pt NWN sheet is assembled from the attachment growth of 1.9 nm-sized 0-D nanocrystals into 1-D nanowires featuring a high density of grain boundaries, which then interconnect to form monolayer network structures extending into centimeter-scale size. Further investigation into the formation mechanism reveals that the initial emergence of NWN sheets occurs at the gas/liquid interfaces of the bubbles produced by sodium borohydride (NaBH₄) during the synthesis process. Upon the rupture of these bubbles, an exocytosis-like process releases the Pt NWN sheets at the gas/liquid surface, which subsequently merge into a continuous monolayer Pt NWN sheet. The Pt NWN sheets exhibit outstanding oxygen reduction reaction (ORR) activities, with specific and mass activities 12.0 times and 21.2 times greater, respectively, than those of current state-of-the-art commercial Pt/C electrocatalysts.

The influence of selected polymers on the surface tension of solutions developed for the preparation of eye drops

BACKGROUND

Many substances are used to increase the viscosity of eye drops and reduce their surface tension. Their function is to prolong the persistence of the product on the surface of the eyeball and to increase the bioavailability of the pharmacologically active ingredient.

OBJECTIVES

To investigate the surface tension of substances added to the eye drops, with the main aim of modulating properties of the preparation.

MATERIAL AND METHODS

Five substances contained in solutions proposed for the development of eye drops were studied: sodium hyaluronate macromolecular (H-Na W), sodium hyaluronate ultramolecular (H-Na UM), hyaluronic acid 4% (K-H), methylcellulose (MC), and polyacrylic acid (PA). The main method was to study the surface tension using the du Noüy ring tensiometer.

RESULTS

The research presented in this paper shows the various effects of different eye drop ingredients on the surface tension of the solutions. The surface tension values of PA solutions are in the range of 48.89-56.03 mN/m, of MC in the range of 68.94-89.32 mN/m, of K-H 54.54-65.66 mN/m, of H-Na UM 67.18-70.97 mN/m, and of H-Na W 67.09-71.73 mN/m.

CONCLUSIONS

The use of different polymers affects the surface tension of model solutions proposed for use in ophthalmic preparations. Compounds containing carboxyl groups and anionic polymers have a similar effect on reducing the surface tension of the solution as classical surfactant compounds.

The Effect of Terbinafine and Its Ionic Salts on Certain Fungal Plant Pathogens

Terbinafine, an inhibitor of squalene epoxidase in ergosterol biosynthesis, is chiefly utilized as an antifungal medication with potential uses in pesticide applications. This study explores the fungicidal efficacy of terbinafine against prevalent plant pathogens and confirms its effectiveness. To augment its water solubility, five ionic salts of terbinafine were synthesized by pairing them with organic acids. Among these salts, TIS 5 delivered the most impressive results, amplifying the water solubility of terbinafine by three orders of magnitude and lessening its surface tension to facilitate better dispersion during spraying. The in vivo experiments on cherry tomatoes showed that TIS 5 had a superior therapeutic activity compared to its parent compound and two commonly used broad-spectrum fungicides, pyraclostrobin and carbendazim. The results highlight the potential of terbinafine and its ionic salts, particularly TIS 5, for use as fungicides in agriculture due to their synergistic effects with furan-2-carboxylate.

Proximity to criticality predicts surface properties of biomolecular condensates

It has recently become appreciated that cells self-organize their interiors through the formation of biomolecular condensates. These condensates, typically formed through liquid-liquid phase separation of proteins, nucleic acids, and other biopolymers, exhibit reversible assembly/disassembly in response to changing conditions. Condensates play many functional roles, aiding in biochemical reactions, signal transduction, and sequestration of certain components. Ultimately, these functions depend on the physical properties of condensates, which are encoded in the microscopic features of the constituent biomolecules. In general, the mapping from microscopic features to macroscopic properties is complex, but it is known that near a critical point, macroscopic properties follow power laws with only a small number of parameters, making it easier to identify underlying principles. How far does this critical region extend for biomolecular condensates and what principles govern condensate properties in the critical regime? Using coarse-grained molecular-dynamics simulations of a representative class of biomolecular condensates, we found that the critical regime can be wide enough to cover the full physiological range of temperatures. Within this critical regime, we identified that polymer sequence influences surface tension predominately via shifting the critical temperature. Finally, we show that condensate surface tension over a wide range of temperatures can be calculated from the critical temperature and a single measurement of the interface width.

Supplemental methionine selenium effects on egg yolk physicochemical, functional, and protein structure during storage

To clarify the effect of the addition of methionine selenium on the physicochemical, functional, and protein structural properties of egg yolk during storage. We analyzed the changes in the main indicators of egg yolks stored at 4°C and 25°C for 28 days. The results showed that the increase in water content and pH, and the decrease in absolute zeta potential and apparent viscosity of the selenium-rich egg yolks (Se-group) during storage were smaller than those of the control group egg yolks (C-group). In addition, the antioxidant capacity and emulsifying ability of the Se-group during storage were better than those of the C-group. Simultaneously, the hardness and chewiness of the Se-group gel during storage were lower than those of the C-group. The protein structure results showed that selenium rich treatment did not affect the secondary structure of egg yolk protein during storage but could improve the fluorescence intensity of the egg yolk protein. Therefore, the addition of methionine selenium can reduce the degree of deterioration in the physicochemical properties of egg yolk during storage and extend its shelf life.

Conditions for the stable adsorption of lipid monolayers to solid surfaces

Lipid monolayers are ubiquitous in biological systems and have multiple roles in biotechnological applications, such as lipid coatings that enhance colloidal stability or prevent surface fouling. Despite the great technological importance of surface-adsorbed lipid monolayers, the connection between their formation and the chemical characteristics of the underlying surfaces has remained poorly understood. Here, we elucidate the conditions required for stable lipid monolayers nonspecifically adsorbed on solid surfaces in aqueous solutions and water/alcohol mixtures. We use a framework that combines the general thermodynamic principles of monolayer adsorption with fully atomistic molecular dynamics simulations. We find that, very universally, the chief descriptor of adsorption free energy is the wetting contact angle of the solvent on the surface. It turns out that monolayers can form and remain thermodynamically stable only on substrates with contact angles above the adsorption contact angle, θads. Our analysis establishes that θads falls into a narrow range of around 60∘-70∘ in aqueous media and is only weakly dependent on the surface chemistry. Moreover, to a good approximation, θads is roughly determined by the ratio between the surface tensions of hydrocarbons and the solvent. Adding small amounts of alcohol to the aqueous medium lowers θads and thereby facilitates monolayer formation on hydrophilic solid surfaces. At the same time, alcohol addition weakens the adsorption strength on hydrophobic surfaces and results in a slowdown of the adsorption kinetics, which can be useful for the preparation of defect-free monolayers.

Study on Reversible Solubilization by Adjusting Surfactant Properties

Solubilization allows us to dissolve hydrophobic materials in water and to carry them to where they are needed. The purpose of this study is to control solubilization, especially the release of solubilized materials, via external stimulation. An amphoteric surfactant, dodecyldimethyl(3-sulfopropyl)ammonium hydroxide inner salt (SB-12), was employed, and a pH change was chosen as the external stimulus. We measured the surface tension of an SB-12 solution via the Wilhelmy method, and the absorbance of a solubilized solution was determined using UV-Vis spectroscopy at various pH values. The surface tension was almost the same at any pH, contrary to our expectations. This result suggests that the adsorption behavior and micelle formation of SB-12 were not affected by pH very much. On the other hand, the solubilization behavior remarkably depended on the pH. In particular, the solubilization ability under the basic condition was much larger than that under the acidic and neutral conditions. Taking advantage of such a difference in solubilization ability under some pH conditions, the solubilized material could be completely removed from the solution. Thus, we clarified the mechanism of release for solubilized materials due to a pH change.

A Review of Continuum Mechanics for Mechanical Deformation of Lipid Membranes

Mechanical deformation of lipid membranes plays important roles in various cellular tasks. Curvature deformation and lateral stretching are two major energy contributions to the mechanical deformation of lipid membranes. In this paper, continuum theories for these two major membrane deformation events were reviewed. Theories based on curvature elasticity and lateral surface tension were introduced. Numerical methods as well as biological applications of the theories were discussed.

Surface Active Salivary Metabolites Indicate Oxidative Stress and Inflammation in Obstructive Sleep Apnea

PURPOSE

Obstructive sleep apnea (OSA), a highly prevalent and potentially serious sleep disorder, requires effective screening tools. Saliva is a useful biological fluid with various metabolites that might also influence upper airway patency by affecting surface tension in the upper airway. However, little is known about the composition and role of salivary metabolites in OSA. Therefore, we investigated the metabolomics signature in saliva from the OSA patients and evaluated the associations between identified metabolites and salivary surface tension.

METHODS

We studied 68 subjects who visited sleep clinic due to the symptoms of OSA. All underwent full-night in-lab polysomnography. Patients with apnea-hypopnea index (AHI) < 10 were classified to the control, and those with AHI ≥ 10 were the OSA groups. Saliva samples were collected before and after sleep. The centrifuged saliva samples were analyzed by liquid chromatography with high-resolution mass spectrometry (ultra-performance liquid chromatography-tandem mass spectrometry; UPLC-MS/MS). Differentially expressed salivary metabolites were identified using open source software (XCMS) and Compound Discoverer 2.1. Metabolite set enrichment analysis (MSEA) was performed using MetaboAnalyst 5.0. The surface tension of the saliva samples was determined by the pendant drop method.

RESULTS

Three human-derived metabolites (1-palmitoyl-2-[5-hydroxyl-8-oxo-6-octenoyl]-sn-glycerol-3-phosphatidylcholine [PHOOA-PC], 1-palmitoyl-2-[5-keto-8-oxo-6-octenoyl]-sn-glycerol-3-phosphatidylcholine [KPOO-PC], and 9-nitrooleate) were significantly upregulated in the after-sleep salivary samples from the OSA patients compared to the control group samples. Among the candidate metabolites, only PHOOA-PC was correlated with the AHI. In OSA samples, salivary surface tension decreased after sleep. The differences in surface tension were negatively correlated with PHOOA-PC and 9-nitrooleate concentrations. Furthermore, MSEA revealed that arachidonic acid-related metabolism pathways were upregulated in the after-sleep samples from the OSA group.

CONCLUSIONS

This study revealed that salivary PHOOA-PC was correlated positively with the AHI and negatively with salivary surface tension in the OSA group. Salivary metabolomic analysis may improve our understanding of upper airway dynamics and provide new insights into novel biomarkers and therapeutic targets in OSA.

Marangoni-driven nonlinear dynamics of bimolecular frontal systems: a general classification for equal diffusion coefficients

When bimolecular fronts form in solutions, their dynamics is likely to be affected by chemically driven convection such as buoyancy- and Marangoni-driven flows. It is known that front dynamics in the presence of buoyancy-driven convection can be predicted solely on the basis of the one-dimensional reaction-diffusion concentration profiles but that those predictions fail for Marangoni-driven convection. With a two-dimensional reaction-diffusion-Marangoni convection model, we analyze here convective effects on the time scalings of the front properties, together with the influence of reaction reversibility and of the ratio of initial reactants' concentrations on the front dynamics. The effect of buoyancy forces is here neglected by assuming the reactive system to be in zero-gravity condition and/or the solution density to be spatially homogenous. This article is part of the theme issue 'New trends in pattern formation and nonlinear dynamics of extended systems'.

Extracellular matrix assembly stress initiates Drosophila central nervous system morphogenesis

Forces controlling tissue morphogenesis are attributed to cellular-driven activities, and any role for extracellular matrix (ECM) is assumed to be passive. However, all polymer networks, including ECM, can develop autonomous stresses during their assembly. Here, we examine the morphogenetic function of an ECM before reaching homeostatic equilibrium by analyzing de novo ECM assembly during Drosophila ventral nerve cord (VNC) condensation. Asymmetric VNC shortening and a rapid decrease in surface area correlate with the exponential assembly of collagen IV (Col4) surrounding the tissue. Concomitantly, a transient developmentally induced Col4 gradient leads to coherent long-range flow of ECM, which equilibrates the Col4 network. Finite element analysis and perturbation of Col4 network formation through the generation of dominant Col4 mutations that affect assembly reveal that VNC morphodynamics is partially driven by a sudden increase in ECM-driven surface tension. These data suggest that ECM assembly stress and associated network instabilities can actively participate in tissue morphogenesis.

Surface tension of cavitation bubbles

We have studied homogeneous cavitation in liquid nitrogen and normal liquid helium. We monitor the fluid content in a large number of independent mesopores with an ink-bottle shape, either when the fluid in the pores is quenched to a constant pressure or submitted to a pressure decreasing at a controlled rate. For both fluids, we show that, close enough to their critical point, the cavitation pressure threshold is in good agreement with the Classical Nucleation Theory (CNT). In contrast, at lower temperatures, deviations are observed, consistent with a reduction of the surface tension for bubbles smaller than two nanometers in radius. For nitrogen, we could accurately measure the nucleation rate as a function of the liquid pressure down to the triple point, where the critical bubble radius is about one nanometer. We find that CNT still holds, provided that the curvature dependence of the surface tension is taken into account. Furthermore, we evaluate the first- and second-order corrections in curvature, which are in reasonable agreement with recent calculations for a Lennard-Jones fluid.

Phase Transitions of the Pulmonary Surfactant Film at the Perfluorocarbon-Water Interface

Pulmonary surfactant is a lipid-protein complex that forms a thin film at the air-water surface of the lungs. This surfactant film defines the elastic recoil and respiratory mechanics of the lungs. One generally accepted rationale of using oxygenated perfluorocarbon (PFC) as a respiratory medium in liquid ventilation is to take advantage of its low surface tensions (14-18 mN/m), which was believed to make PFC an ideal replacement of the exogenous surfactant. In comparison to the extensive studies of the phospholipid phase behavior of the pulmonary surfactant film at the air-water surface, its phase behavior at the PFC-water interface is essentially unknown. Here we reported the first detailed biophysical study of phospholipid phase transitions in two animal-derived natural pulmonary surfactant films, Infasurf and Survanta, at the PFC-water interface using constrained drop surfactometry (CDS). The CDS allows in situ Langmuir-Blodgett transfer from the PFC-water interface, thus permitting direct visualization of lipid polymorphism in pulmonary surfactant films using atomic force microscopy. Our data suggested that regardless of its low surface tension, the PFC cannot be used as a replacement of pulmonary surfactant in liquid ventilation where the air-water surface of the lungs is replaced with the PFC-water interface that features an intrinsically high interfacial tension. The pulmonary surfactant film at the PFC-water interface undergoes continuous phase transitions at surface pressures less than the equilibrium spreading pressure of 50 mN/m, and a monolayer-to-multilayer transition above this critical pressure. These results provided not only novel biophysical insight into the phase behavior of natural pulmonary surfactant at the oil-water interface but also translational implications into the further development of liquid ventilation and liquid breathing techniques.