A New Theory about Interfacial Proton Diffusion Revisited: The Commonly Accepted Laws of Electrostatics and Diffusion Prevail

The high propensity of protons to stay at interfaces has attracted much attention over the decades. It enables long-range interfacial proton diffusion without relying on titratable residues or electrostatic attraction. As a result, various phenomena manifest themselves, ranging from spillover in material sciences to local proton circuits between proton pumps and ATP synthases in bioenergetics. In an attempt to replace all existing theoretical and experimental insight into the origin of protons' preference for interfaces, TELP, the "Transmembrane Electrostatically-Localized Protons" hypothesis, has been proposed. The TELP hypothesis envisions static H+ and OH- layers on opposite sides of interfaces that are up to 75 µm thick. Yet, the separation at which the electrostatic interaction between two elementary charges is comparable in magnitude to the thermal energy is more than two orders of magnitude smaller and, as a result, the H+ and OH- layers cannot mutually stabilize each other, rendering proton accumulation at the interface energetically unfavorable. We show that (i) the law of electroneutrality, (ii) Fick's law of diffusion, and (iii) Coulomb's law prevail. Using them does not hinder but helps to interpret previously published experimental results, and also helps us understand the high entropy release barrier enabling long-range proton diffusion along the membrane surface.

Effects of Charged Surfactants on Interfacial Water Structure and Macroscopic Properties of the Air-Water Interface

Surfactants are used to control the macroscopic properties of the air-water interface. However, the link between the surfactant molecular structure and the macroscopic properties remains unclear. Using sum-frequency generation spectroscopy and molecular dynamics simulations, two ionic surfactants (dodecyl trimethylammonium bromide, DTAB, and sodium dodecyl sulphate, SDS) with the same carbon chain lengths and charge magnitude (but different signs) of head groups interact and reorient interfacial water molecules differently. DTAB forms a thicker but sparser interfacial layer than SDS. It is due to the deep penetration into the adsorption zone of Br- counterions compared to smaller Na+ ones, and also due to the flip-flop orientation of water molecules. SDS alters two distinctive interfacial water layers into a layer where H+ points to the air, forming strong hydrogen bonding with the sulphate headgroup. In contrast, only weaker dipole-dipole interactions with the DTAB headgroup are formed as they reorient water molecules with H+ point down to the aqueous phase. Hence, with more molecules adsorbed at the interface, SDS builds up a higher interfacial pressure than DTAB, producing lower surface tension and higher foam stability at a similar bulk concentration. Our findings offer improved knowledge for understanding various processes in the industry and nature.

Water-assisted strong underwater adhesion via interfacial water removal and self-adaptive gelation

In nearly all cases of underwater adhesion, water molecules typically act as a destroyer. Thus, removing interfacial water from the substrate surfaces is essential for forming super-strong underwater adhesion. However, current methods mainly rely on physical means to dislodge interfacial water, such as absorption, hydrophobic repulsion, or extrusion, which are inefficient in removing obstinate hydrated water at contact interface, resulting in poor adhesion. Herein, we present a unique means of reversing the role of water to assist in realizing a self-strengthening liquid underwater adhesive (SLU-adhesive) that can effectively remove water at contact interface. This is achieved through multiscale physical-chemical coupling methods across millimeter to molecular levels and self-adaptive strengthening of the cohesion during underwater operations. As a result, strong adhesion over 1,600 kPa (compared to ~100 to 1,000 kPa in current state of the art) can be achieved on various materials, including inorganic metal and organic plastic materials, without preloading in different environments such as pure water, a wide range of pH solutions (pH = 3 to 11), and seawater. Intriguingly, SLU-adhesive/photothermal nanoparticles (carbon nanotubes) hybrid materials can significantly reduce the time required for complete curing from 24 h to 40 min using near-infrared laser radiation due to unique thermal-response of the chemical reaction rate. The excellent adhesion property and self-adaptive adhesion procedure allow SLU-adhesive materials to demonstrate great potential for broad applications in underwater sand stabilization, underwater repair, and even adhesion failure detection as a self-reporting adhesive. This concept of "water helper" has potential to advance underwater adhesion and manufacturing strategies.

Structural water molecules dominated p band intermediate states as a unified model for the origin on the photoluminescence emission of noble metal nanoclusters: from monolayer protected clusters to cage confined nanoclusters

In the past several decades, noble metal nanoclusters (NMNCs) have been developed as an emerging class of luminescent materials due to their superior photo-stability and biocompatibility, but their luminous quantum yield is relatively low and the physical origin of the bright photoluminescence (PL) of NMNCs remain elusive, which limited their practical application. As the well-defined structure and composition of NMNCs have been determined, in this mini-review, the effect of each component (metal core, ligand shell and interfacial water) on their PL properties and corresponded working mechanism were comprehensively introduced, and a model that structural water molecules dominated p band intermediate state was proposed to give a unified understanding on the PL mechanism of NMNCs and a further perspective to the future developments of NMNCs by revisiting the development of our studies on the PL mechanism of NMNCs in the past decade.

Interfacial water molecules contribute to antibody binding to the receptor-binding domain of SARS-CoV-2 spike protein

Antibodies that recognize the spike protein of severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2), especially the neutralizing antibodies, carry great hope in the treatment and final elimination of COVID-19. Driven by a synchronized global effort, thousands of antibodies against the spike protein have been identified during the past two years, with the structural information available at atomistic detail for hundreds of these antibodies. We developed an improved molecular mechanics/Poisson-Boltzmann surface area (MM/PBSA) method including explicitly treated interfacial water to calculate the binding free energy between representative antibodies and the receptor binding domain (RBD) domain of SARS-COV-2 spike proteins. We discovered that explicit treatment of water molecules located at the interface between RBD and antibody effectively improves the results for the WT and variants of concern (VOC) systems. Interfacial water molecules, together with surface and internal water molecules, behave drastically from bulk water and exert peculiar impacts on protein dynamics and energy, and thus warrant explicit treatment to complement implicit solvent models. Our results illustrate the importance of including interfacial water molecules to approach efficient and reliable prediction of binding free energy.Communicated by Ramaswamy H. Sarma.

The Role of Interfacial Water in CO2 Electrolysis over Ni-N-C Catalyst in a Membrane Electrode Assembly Electrolyzer

CO₂ electrolysis is a promising route for achieving net-zero emission through decarbonization. To realize CO₂ electrolysis toward practical application, beyond catalyst structures, it is also critical to rationally manipulate catalyst microenvironments such as the water at the electrode/electrolyte interface. Here, the role of interfacial water in CO₂ electrolysis over Ni-N-C catalyst modified with different polymers is investigated. Benefiting from a hydrophilic electrode/electrolyte interface, the Ni-N-C catalyst modified with quaternary ammonia poly(N-methyl-piperidine-co-p-terphenyl) shows a Faradaic efficiency of 95% and a partial current density of 665 mA cm^-2 for CO production in an alkaline membrane electrode assembly electrolyzer. A scale-up demonstration using a 100 cm² electrolyzer achieves a CO production rate of 514 mL min^-1 at a current of 80 A. In-situ microscopy and spectroscopy measurements indicate that the hydrophilic interface significantly promotes the formation of the *COOH intermediate, rationalizing the high CO₂ electrolysis performance.

Interfacial-Water-Modulated Photoluminescence of Single-Layer WS(2) on Mica

Because of their bandgap tunability and strong light-matter interactions, two-dimensional (2D) semiconductors are considered promising candidates for next-generation optoelectronic devices. However, their photophysical properties are greatly affected by their surrounding environment because of their 2D nature. In this work, we report that the photoluminescence (PL) of single-layer WS₂ is substantially affected by interfacial water that is inevitably present between it and the supporting mica substrates. Using PL spectroscopy and wide-field imaging, we show that the emission signals from A excitons and their negative trions decreased at distinctively different rates with increasing excitation power, which could be attributed to the more efficient annihilation between excitons than between trions. By gas-controlled PL imaging, we also prove that the interfacial water converted the trions into excitons by depleting native negative charges through an oxygen reduction reaction, which rendered the excited WS₂ more susceptible to nonradiative decay via exciton-exciton annihilation. Understanding the role of nanoscopic water in complex low-dimensional materials will eventually contribute to devising their novel functions and related devices.

Interfacial Liquid Water on Graphite, Graphene, and 2D Materials

The optical, electronic, and mechanical properties of graphite, few-layer, and two-dimensional (2D) materials have prompted a considerable number of applications. Biosensing, energy storage, and water desalination illustrate applications that require a molecular-scale understanding of the interfacial water structure on 2D materials. This review introduces the most recent experimental and theoretical advances on the structure of interfacial liquid water on graphite-like and 2D materials surfaces. On pristine conditions, atomic-scale resolution experiments revealed the existence of 1-3 hydration layers. Those layers were separated by ∼0.3 nm. The experimental data were supported by molecular dynamics simulations. However, under standard working conditions, atomic-scale resolution experiments revealed the presence of 2-3 hydrocarbon layers. Those layers were separated by ∼0.5 nm. Linear alkanes were the dominant molecular specie within the hydrocarbon layers. Paradoxically, the interface of an aged 2D material surface immersed in water does not have water molecules on its vicinity. Free-energy considerations favored the replacement of water by alkanes.

Vibrational Analysis of Hydration-Layer Water around Ubiquitin, Unpeeled Layer by Layer: Molecular-Dynamics Perceptions

Classical molecular-dynamics simulations have been performed to examine the interplay between ubiquitin and its hydration-water sub-layers, chiefly from a vibrational-mode and IR viewpoint-where we analyse individual sub-layers characteristics. The vibrational Density of States (VDOS) revealed that the first solvation sub-shell indicates a confined character therein. For layers of increasing distance from the surface, the adoption of greater bulk-like spectral behaviour was evident, suggesting that vibrational harmonisation to bulk occurs within 6-7 Å of the surface.

Coacervate-Derived Hydrogel with Effective Water Repulsion and Robust Underwater Bioadhesion Promotes Wound Healing

Achieving robust underwater adhesion by bioadhesives remains a challenge due to interfacial water. Herein a coacervate-to-hydrogel strategy to enhance interfacial water repulsion and bulk adhesion of bioadhesives is reported. The polyethyleneimine/thioctic acid (PEI/TA) coacervate is deposited onto underwater substrates, which can effectively repel interfacial water and completely spread into substrate surface irregularities due to its liquid and water-immiscible nature. The physical interactions between coacervate and substrate can further enhance interfacial adhesion. Furthermore, driven by the spontaneous hydrophobic aggregation of TA molecules and strong electrostatic interaction between PEI and TA, the coacervate can turn into a hydrogel in situ within minutes without additional stimuli to develop enhanced matrix cohesion and robust bulk adhesion on diverse underwater substrates. Molecular dynamics simulations further reveal atomistic details of the formation and wet adhesion of the PEI/TA coacervate via multimode physical interactions. Lastly, it is demonstrated that the PEI/TA coacervate-derived hydrogel can effectively repel blood and therefore efficiently deliver the carried growth factors at wound sites, thereby enhancing wound healing in an animal model. The advantages of the PEI/TA coacervate-derived hydrogel including body fluid-immiscibility, strong underwater adhesion, adaptability to fit irregular target sites, and excellent biocompatibility make it a promising bioadhesive for diverse biomedical applications.

The dielectric function profile across the water interface through surface-specific vibrational spectroscopy and simulations

The dielectric properties of interfacial water on subnanometer length scales govern chemical reactions, carrier transfer, and ion transport at interfaces. Yet, the nature of the interfacial dielectric function has remained under debate as it is challenging to access the interfacial dielectric with subnanometer resolution. Here we use the vibrational response of interfacial water molecules probed using surface-specific sum-frequency generation (SFG) spectra to obtain exquisite depth resolution. Different responses originate from water molecules at different depths and report back on the local interfacial dielectric environment via their spectral amplitudes. From experimental and simulated SFG spectra at the air/water interface, we find that the interfacial dielectric constant changes drastically across an ∼1 Å thin interfacial water region. The strong gradient of the interfacial dielectric constant leads, at charged planar interfaces, to the formation of an electric triple layer that goes beyond the standard double-layer model.

Role of Interfacial Water in the Tribological Behavior of Graphene in an Electric Field

Friction properties in the electric field are important for the application of graphene as a solid lubricant in graphene-based micro/nanoelectromechanical systems. The studies based on conductive atomic force microscopy show that interfacial water between graphene and the SiO₂/Si substrate affects the friction of graphene in the electric field. Friction without applying voltage remains low because the interfacial water retains a stable ice-like network. However, friction after applying voltage increases because the polar water molecules are attracted by the electric field and gather around the tip. The gathered interfacial water not only increases the deformation of graphene but is also pushed by the tip during frictional sliding, which results in the increased friction. These studies provide beneficial guidelines for the applications of graphene as a solid lubricant in the electric field.

A phenomenological model for interfacial water near hydrophilic polymers

We propose a minimalist phenomenological model for the 'interfacial water' phenomenon that occurs near hydrophilic polymeric surfaces. We achieve this by combining a Ginzburg-Landau approach with Maxwell's equations which leads us to a well-posed model providing a macroscopic interpretation of experimental observations. From the derived governing equations, we estimate the unknown parameters using experimental measurements from the literature. The resulting profiles of the polarization and electric potential show exponential decay near the surface, in qualitative agreement with experiments. Furthermore, the model's quantitative prediction of the electric potential at the hydrophilic surface is in excellent agreement with experiments. The proposed model is a first step towards a more complete parsimonious macroscopic model that will, for example, help to elucidate the effects of interfacial water on cells (e.g. neuronal excitability), the effects of infrared neural stimulation or the effects of drugs mediated by interfacial water.

Double-layer structure of the Pt(111)-aqueous electrolyte interface

We present detailed measurements of the double-layer capacitance of the Pt(111)-electrolyte interface close to the potential of zero charge (PZC) in the presence of several different electrolytes consisting of anions and cations that are considered to be nonspecifically adsorbed. For low electrolyte concentrations, we show strong deviations from traditional Gouy-Chapman-Stern (GCS) behavior that appear to be independent of the nature of the electrolyte ions. Focusing on the capacitance further away from PZC and the trends for increasing ion concentration, we observe ion-specific capacitance effects that appear to be related to the size or hydration strength of the ions. We formulate a model for the structure of the electric double layer of the Pt(111)-electrolyte interface that goes significantly beyond the GCS theory. By combining two existing models, namely, one capturing the water reorganization on Pt close to the PZC and one accounting for an attractive ion-surface interaction not included in the GCS model, we can reproduce and interpret the main features the experimental capacitance of the Pt(111)-electrolyte interface. The model suggests a picture of the double layer with an increased ion concentration close to the interface as a consequence of a weak attractive ion-surface interaction, and a changing polarizability of the Pt(111)-water interface due to the potential-dependent water adsorption and orientation.

Cation- and pH-Dependent Hydrogen Evolution and Oxidation Reaction Kinetics

The production of molecular hydrogen by catalyzing water splitting is central to achieving the decarbonization of sustainable fuels and chemical transformations. In this work, a series of structure-making/breaking cations in the electrolyte were investigated as spectator cations in hydrogen evolution and oxidation reactions (HER/HOR) in the pH range of 1 to 14, whose kinetics was found to be altered by up to 2 orders of magnitude by these cations. The exchange current density of HER/HOR was shown to increase with greater structure-making tendency of cations in the order of Cs⁺ < Rb⁺ < K⁺ < Na⁺ < Li⁺, which was accompanied by decreasing reorganization energy from the Marcus-Hush-Chidsey formalism and increasing reaction entropy. Invoking the Born model of reorganization energy and reaction entropy, the static dielectric constant of the electrolyte at the electrified interface was found to be significantly lower than that of bulk, decreasing with the structure-making tendency of cations at the negatively charged Pt surface. The physical origin of cation-dependent HER/HOR kinetics can be rationalized by an increase in concentration of cations on the negatively charged Pt surface, altering the interfacial water structure and the H-bonding network, which is supported by classical molecular dynamics simulation and surface-enhanced infrared absorption spectroscopy. This work highlights immense opportunities to control the reaction rates by tuning interfacial structures of cation and solvents.

Interfacial Proton Transfer for Hydrogen Evolution at the Sub-Nanometric Platinum/Electrolyte Interface

Understanding the dynamic process of interfacial charge transfer prior to chemisorption is crucial to the development of electrocatalysis. Recently, interfacial water has been highlighted in transferring protons through the electrode/electrolyte interface; however, the identification of the related structural configurations and their influences on the catalytic mechanism is largely complicated by the amorphous and mutable structure of the electrical double layer (EDL). To this end, sub-nanometric Pt electrocatalysts, potentially offering intriguing activity and featuring fully exposed atoms, are studied to uncover the elusive electrode/electrolyte interface via operando X-ray absorption spectroscopy during the hydrogen evolution reaction (HER). Our results show that the metallic Pt clusters derived from the reduction of sub-nanometric Pt clusters (SNM-Pt) exhibit excellent HER activity, with an only 18 mV overpotential at 10 mA/cm² and one-magnitude-higher mass activity than commercial Pt/C. More importantly, a unique Pt-interfacial water configuration with a Pt (from Pt clusters)-O (from water) radial distance of approximately 2.5 Å is experimentally identified as the structural foundation for the interfacial proton transfer. Toward high overpotentials, the interfacial water that structurally evolves from "O-close" to "O-far" accelerates the proton transfer and is responsible for the improved reaction rate by increasing the hydrogen coverage.

Advances in Atomic Force Microscopy: Imaging of Two- and Three-Dimensional Interfacial Water

Interfacial water is closely related to many core scientific and technological issues, covering a broad range of fields, such as material science, geochemistry, electrochemistry and biology. The understanding of the structure and dynamics of interfacial water is the basis of dealing with a series of issues in science and technology. In recent years, atomic force microscopy (AFM) with ultrahigh resolution has become a very powerful option for the understanding of the complex structural and dynamic properties of interfacial water on solid surfaces. In this perspective, we provide an overview of the application of AFM in the study of two dimensional (2D) or three dimensional (3D) interfacial water, and present the prospect and challenges of the AFM-related techniques in experiments and simulations, in order to gain a better understanding of the physicochemical properties of interfacial water.

In Situ Atomic-Scale Imaging of Interfacial Water under 3D Nanoscale Confinement

Capillary condensation of water from vapor is an everyday phenomenon which has a wide range of scientific and technological implications. Many aspects of capillary condensation are not well understood such as the structure of interfacial water, the existence of distinct properties of confined water, or the validity of the Kelvin equation at nanoscale. We note the absence of high-spatial resolution images inside a meniscus. Here, we develop an AFM-based method to provide in situ atomic-scale resolution maps of the solid-water interface of a nanomeniscus (80-250 nm³). The separation between the first two hydration layers on graphite is 0.30 nm, while on mica it is 0.28 nm. Those values are very close to the ones expected for the same surfaces immersed in bulk water. Thus, the hydration layer structure on a crystalline surface is independent of the water volume.

Direct Measurement of Water-Assisted Ion Desorption and Solvation on Isolated Carbon Nanotubes

We have investigated the change in mean residence time of gaseous ions adsorbed on the surface of suspended carbon nanotube field-effect transistors (CNT-FETs) with and without native surface water layers that exists in atmospheric conditions. Devices were characterized electrically before and after dehydration by thermal, dry gas, and vacuum desiccation and in each scenario were found to have substantially higher mean ion residence times. It is proposed that water molecules native to the CNT surface in ambient conditions provide a reduction pathway for incoming gaseous ions, yielding hydronium ions (H₃O⁺). This is supported by the appearance of frequent clustered readsorption events in the presence of surface water, caused by the rapid hopping of H⁺ between the device surface and the lowest water layer, which are not present in data collected from desiccated devices. After desiccation of the device, a thermal trial was conducted to determine the adsorption energy of N₂⁺ ions on the CNT surface. This work has profound implications for our understanding of wetting in one-dimensional systems and the chemistry of ion chemisorption and solvation on the surfaces of materials in general.

Single-water-dipole-layer-driven Reversible Charge Order Transition in 1T-TaS2

Water-solid interactions are crucial for many fundamental phenomena and technological processes. Here, we report a scanning tunneling microscopy study about the charge density wave (CDW) transition in 1T-TaS₂ driven by a single water dipole layer. At low temperature, pristine 1T-TaS₂ is a prototypical CDW compound with 13 × 13 charge order. After growing a highly ordered water adlayer, a new charge order with 3 × 3 periodicity emerges on water-covered 1T-TaS₂. After water desorption, the entire 1T-TaS₂ surface appears as localized 13 × 13 CDW domains that are separated by residual-water-cluster-pinned CDW domain walls. First-principles calculations show that the electric dipole moments in the water adlayer attract electrons to the top layer of 1T-TaS₂, which shifts the phonon softening mode and induces the 13 × 13 to 3 × 3 charge order transition. Our results pave the way for creating new collective quantum states of matter with a molecular dipole layer.

Hidden Isolated OH at the Charged Hydrophobic Interface Revealed by Two-Dimensional Heterodyne-Detected VSFG Spectroscopy

Water around hydrophobic groups mediates hydrophobic interactions that play key roles in many chemical and biological processes. Thus, the molecular-level elucidation of the properties of water in the vicinity of hydrophobic groups is important. We report on the structure and dynamics of water at two oppositely charged hydrophobic ion/water interfaces, that is, the tetraphenylborate-ion (TPB^- )/water and tetraphenylarsonium-ion (TPA⁺ )/water interfaces, which are clarified by two-dimensional heterodyne-detected vibrational sum-frequency generation (2D HD-VSFG) spectroscopy. The obtained 2D HD-VSFG spectra of the anionic TPB^- interface reveal the existence of distinct π-hydrogen bonded OH groups in addition to the usual hydrogen-bonded OH groups, which are hidden in the steady-state spectrum. In contrast, 2D HD-VSFG spectra of the cationic TPA⁺ interface only show the presence of usual hydrogen-bonded OH groups. The present study demonstrates that the sign of the interfacial charge governs the structure and dynamics of water molecules that face the hydrophobic region.

Quantum biology in low level light therapy: death of a dogma

Background

It is shown that despite exponential increase in the number of clinically exciting results in low level light therapy (LLLT), scientific progress in the field is retarded by a wrong fundamental model employed to explain the photon-cell interaction as well as by an inadequate terminology. This is reflected by a methodological stagnation in LLLT, persisting since 1985. The choice of the topics is, by necessity, somewhat arbitrary. Obviously, we are writing more about the fields we know more about. In some cases, there are obvious objective reasons for the choice. Progress in LLLT is currently realized by a trial and error process, as opposed to a systematic approach based on a valid photon-cell interaction model.

Methods

The strategy to overcome the current problem consists in a comprehensive analysis of the theoretical foundation of LLLT, and if necessary, by introducing new interaction models and checking their validity on the basis of the two pillars of scientific advance (I) agreement with experiment and (II) predictive capability. The list of references used in this work, does contain a representative part of what has been done in the photon-cell interaction theory in recent years, considered as ascertained by the scientific community.

Results

Despite the immense literature on the involvement of cytochrome c oxidase (COX) in LLLT, the assumption that COX is the main mitochondrial photoacceptor for R-NIR photons no longer can be counted as part of the theoretical framework proper, at least not after we have addressed the misleading points in the literature. Here, we report the discovery of a coupled system in mitochondria whose working principle corresponds to that of field-effect transistor (FET). The functional interplay of cytochrome c (emitter) and COX (drain) with a nanoscopic interfacial water layer (gate) between the two enzymes forms a biological FET in which the gate is controlled by R-NIR photons. By reducing the viscosity of the nanoscopic interfacial water layers within and around the mitochondrial rotary motor in oxidatively stressed cells R-NIR light promotes the synthesis of extra adenosine triphosphate (ATP).

Conclusions

Based on the results of our own work and a review of the published literature, we present the effect of R-NIR photons on nanoscopic interfacial water layers in mitochondria and cells as a novel understanding of the biomedical effects R-NIR light. The novel paradigm is in radical contrast to the theory that COX is the main absorber for R-NIR photons and responsible for the increase in ATP synthesis, a dogma propagated for more than 20 years.

Advances in Atomic Force Microscopy: Weakly Perturbative Imaging of the Interfacial Water

The structure and dynamics of interfacial water, determined by the water-interface interactions, are important for a wide range of applied fields and natural processes, such as water diffusion (Kim et al., 2013), electrochemistry (Markovic, 2013), heterogeneous catalysis (Over et al., 2000), and lubrication (Zilibotti et al., 2013). The precise understanding of water-interface interactions largely relies on the development of atomic-scale experimental techniques (Guo et al., 2014) and computational methods (Hapala et al., 2014b). Scanning probe microscopy has been extensively applied to probe interfacial water in many interdisciplinary fields (Ichii et al., 2012; Shiotari and Sugimoto, 2017; Peng et al., 2018a). In this perspective, we review the recent progress in the noncontact atomic force microscopy (nc-AFM) imaging and AFM simulation techniques and discuss how the newly developed techniques are applied to study the properties of interfacial water. The nc-AFM with the quadrupole-like CO-terminated tip can achieve ultrahigh-resolution imaging of the interfacial water on different surfaces, trace the reconstruction of H-bonding network and determine the intrinsic structures of the weakly bonded water clusters and even their metastable states. In the end, we present an outlook on the directions of future AFM studies of interfacial water as well as the challenges faced by this field.

Formation and surface-stabilizing contributions to bare nanoemulsions created with negligible surface charge

The stabilization of nanoemulsions, nanosized oil droplets dispersed in water, is commonly achieved through the addition of surfactants and polymers. However, nanoemulsions in the absence of emulsifiers have been observed to acquire a significant negative charge at their surface, which ultimately contributes to their stability. While the source of this negative charge is disputed to this day, its presence is taken as an inherent property of the aqueous-hydrophobic interface. This report provides a look at the molecular structure and bonding characteristics of bare aqueous-hydrophobic nanoemulsion interfaces. We report the creation of bare nanoemulsions with near zero surface charge, which are marginally stable for several days. The process of creating these low-charge nanoemulsions (LCNEs) required rigorous cleaning procedures and proper solvent storage conditions. Using vibrational sum-frequency scattering spectroscopy, we measure the structure and bonding of the interfacial aqueous and hydrophobic phases. The surfaces of these LCNE samples possess a measurable free OH vibration, not found in previous studies and indicative of a clean interface. Tuning the nanoemulsion charge through addition of anionic surfactants, modeling potential surface-active contaminants, we observe the free OH to disappear and a reorientation of the interfacial hydrophobic molecules at micromolar surfactant concentrations. Notably, the free OH vibration provides evidence for stronger dispersion interactions between water molecules and the hydrophobic phase at the LCNE surface compared with similar planar water-alkane interfaces. We propose the stronger bonding interactions, in addition to an ordered interfacial aqueous layer, contribute to the delayed droplet coalescence and subsequent phase separation.

Affinity Improvement of a Cancer-Targeted Antibody through Alanine-Induced Adjustment of Antigen-Antibody Interface

To investigate favorable single amino acid substitutions that improve antigen-antibody interactions, alanine (Ala) mutagenesis scanning of the interfacial residues of a cancer-targeted antibody, B5209B, was performed based on X-ray crystallography analysis. Two substitutions were shown to significantly enhance the binding affinity for the antigen, by up to 30-fold. One substitution improved the affinity by a gain of binding enthalpy, whereas the other substitution improved the affinity by a gain of binding entropy. Molecular dynamics simulations showed that the enthalpic improvement could be attributed to the stabilization of distant salt bridges located at the periphery of the antigen-antibody interface. The entropic improvement was due to the release of water molecules that were stably trapped in the antigen-antibody interface of the wild-type antibody. Importantly, these effects of the Ala substitutions were caused by subtle adjustments of the binding interface. These results will be helpful to design high-affinity antibodies with avoiding entropy-enthalpy compensation.

Hydration Layer Structure of Biofouling-Resistant Nanoparticles

Hydrophilic surface chemistries can strongly bind water to produce surfaces that are highly resistant to protein adsorption and fouling. The interfacial bound water and its distinct properties have intrigued researchers for decades, yet the relationship between the water three-dimensional structure and function in antifouling coatings remains elusive. Here, we use hydrophilic, epoxy organosilane modified silica nanoparticles to demonstrate cheap, robust, and practically applied coatings that we discover have broad-ranging, ultralow fouling properties when challenged by various proteins, bacteria, and fungal spores. To understand their excellent antifouling properties, frequency modulation-atomic force microscopy is used to directly observe the interfacial water structure at subatomic resolution, which we validate using all-atom molecular dynamic simulations that strikingly predict similar structures of water layers on the original and ultralow fouling surfaces. The convergence of experimental and modeling data reveals that suitably spaced, flexible chains with hydrophilic groups interact with water molecules to produce a connective, quasi-stable layer, consisting of dynamic interfacial water, that provides a basis for antifouling performance of ultrathin, hydrophilic surface chemistries.

Preordering of water is not needed for ice recognition by hyperactive antifreeze proteins

Antifreeze proteins (AFPs) inhibit ice growth in organisms living in cold environments. Hyperactive insect AFPs are particularly effective, binding ice through "anchored clathrate" motifs. It has been hypothesized that the binding of hyperactive AFPs to ice is facilitated by preordering of water at the ice-binding site (IBS) of the protein in solution. The antifreeze protein TmAFP displays the best matching of its binding site to ice, making it the optimal candidate to develop ice-like order in solution. Here we use multiresolution simulations to unravel the mechanism by which TmAFP recognizes and binds ice. We find that water at the IBS of the antifreeze protein in solution does not acquire ice-like or anchored clathrate-like order. Ice recognition occurs by slow diffusion of the protein to achieve the proper orientation with respect to the ice surface, followed by fast collective organization of the hydration water at the IBS to form an anchored clathrate motif that latches the protein to the ice surface. The simulations suggest that anchored clathrate order could develop on the large ice-binding surfaces of aggregates of ice-nucleating proteins (INP). We compute the infrared and Raman spectra of water in the anchored clathrate motif. The signatures of the OH stretch of water in the anchored clathrate motif can be distinguished from those of bulk liquid in the Raman spectra, but not in the infrared spectra. We thus suggest that Raman spectroscopy may be used to probe the anchored clathrate order at the ice-binding surface of INP aggregates.

Controlling Water Intercalation Is Key to a Direct Graphene Transfer

The key steps of a transfer of two-dimensional (2D) materials are the delamination of the as-grown material from a growth substrate and the lamination of the 2D material on a target substrate. In state-of-the-art transfer experiments, these steps remain very challenging, and transfer variations often result in unreliable 2D material properties. Here, it is demonstrated that interfacial water can insert between graphene and its growth substrate despite the hydrophobic behavior of graphene. It is understood that interfacial water is essential for an electrochemistry-based graphene delamination from a Pt surface. Additionally, the lamination of graphene to a target wafer is hindered by intercalation effects, which can even result in graphene delamination from the target wafer. For circumvention of these issues, a direct, support-free graphene transfer process is demonstrated, which relies on the formation of interfacial water between graphene and its growth surface, while avoiding water intercalation between graphene and the target wafer by using hydrophobic silane layers on the target wafer. The proposed direct graphene transfer also avoids polymer contamination (no temporary support layer) and eliminates the need for etching of the catalyst metal. Therefore, recycling of the growth template becomes feasible. The proposed transfer process might even open the door for the suggested atomic-scale interlocking-toy-brick-based stacking of different 2D materials, which will enable a more reliable fabrication of van der Waals heterostructure-based devices and applications.

Interfacial Mechanical Properties of Graphene on Self-Assembled Monolayers: Experiments and Simulations

Self-assembled monolayers (SAMs) have been widely used to engineer the electronic properties of substrate-supported graphene devices. However, little is known about how the surface chemistry of SAMs affects the interfacial mechanical properties of graphene supported on SAMs. Fluctuations and changes in these properties affect the stress transfer between substrate and the supported graphene and thus the performance of graphene-based devices. The changes in interfacial mechanical properties can be characterized by measuring the out-of-plane elastic properties. Combining contact resonance atomic force microcopy experiments with molecular dynamics simulations, we show that the head group chemistry of a SAM, which affects the interfacial interactions, can have a significant effect on the out-of-plane elastic modulus of the graphene-SAM heterostructure. Graphene supported on hydrophobic SAMs leads to heterostructures stiffer than those of graphene supported on hydrophilic SAMs, which is largely due to fewer water molecules present at the graphene-SAM interface. Our results provide an important, and often overlooked, insight into the mechanical properties of substrate-supported graphene electronics.

Janus effect of antifreeze proteins on ice nucleation

The mechanism of ice nucleation at the molecular level remains largely unknown. Nature endows antifreeze proteins (AFPs) with the unique capability of controlling ice formation. However, the effect of AFPs on ice nucleation has been under debate. Here we report the observation of both depression and promotion effects of AFPs on ice nucleation via selectively binding the ice-binding face (IBF) and the non-ice-binding face (NIBF) of AFPs to solid substrates. Freezing temperature and delay time assays show that ice nucleation is depressed with the NIBF exposed to liquid water, whereas ice nucleation is facilitated with the IBF exposed to liquid water. The generality of this Janus effect is verified by investigating three representative AFPs. Molecular dynamics simulation analysis shows that the Janus effect can be established by the distinct structures of the hydration layer around IBF and NIBF. Our work greatly enhances the understanding of the mechanism of AFPs at the molecular level and brings insights to the fundamentals of heterogeneous ice nucleation.

Tuning Ice Nucleation with Supercharged Polypeptides

Supercharged unfolded polypeptides (SUPs) are exploited for controlling ice nucleation via tuning the nature of charge and charge density of SUPs. The results show that positively charged SUPs facilitate ice nucleation, while negatively charged ones suppress it. Moreover, the charge density of the SUP backbone is another parameter to control it.

Tuning ice nucleation with counterions on polyelectrolyte brush surfaces

Heterogeneous ice nucleation (HIN) on ionic surfaces is ubiquitous in a wide range of atmospheric aerosols and at biological interfaces. Despite its great importance in cirrus cloud formation and cryopreservation of cells, organs, and tissues, it remains unclear whether the ion-specific effect on ice nucleation exists. Benefiting from the fact that ions at the polyelectrolyte brush (PB)/water interface can be reversibly exchanged, we report the effect of ions on HIN on the PB surface, and we discover that the distinct efficiency of ions in tuning HIN follows the Hofmeister series. Moreover, a large HIN temperature window of up to 7.8°C is demonstrated. By establishing a correlation between the fraction of ice-like water molecules and the kinetics of structural transformation from liquid- to ice-like water molecules at the PB/water interface with different counterions, we show that our molecular dynamics simulation analysis is consistent with the experimental observation of the ion-specific effect on HIN.

Lipid carbonyl groups terminate the hydrogen bond network of membrane-bound water

We present a combined experimental sum-frequency generation (SFG) spectroscopy and ab initio molecular dynamics simulations study to clarify the structure and orientation of water at zwitterionic phosphatidylcholine (PC) lipid and amine N-oxide (AO) surfactant monolayers. Simulated O-H stretch SFG spectra of water show good agreement with the experimental data. The SFG response at the PC interface exhibits positive peaks, whereas both negative and positive bands are present for the similar zwitterionic AO interface. The positive peaks at the water/PC interface are attributed to water interacting with the lipid carbonyl groups, which act as efficient hydrogen bond acceptors. This allows the water hydrogen bond network to reach, with its (up-oriented) O-H groups, into the headgroup of the lipid, a mechanism not available for water underneath the AO surfactant. This highlights the role of the lipid carbonyl group in the interfacial water structure at the membrane interface, namely, stabilizing the water hydrogen bond network.

Nanodroplet Depinning from Nanoparticles

Nanoscale defects on a substrate affect the sliding motion of water droplets. Using in situ transmission electron microscopy imaging, we visualized the depinning dynamics of water nanodroplets from gold nanoparticles on a flat SiNx surface. Our observations showed that nanoscale pinning effects of the gold nanoparticle oppose the lateral forces, resulting in stretching, even breakup, of the water nanodroplet. Using continuum long wave theory, we modeled the dynamics of a nanodroplet depinning from a nanoparticle of comparable length scales, and the model results are consistent with experimental findings and show formation of a capillary bridge prior to nanodroplet depinning. Our findings have important implications on surface cleaning at the nanoscale.

Surface Effect of Alumina on the First Electronic Transition of Liquid Water Studied by Far-Ultraviolet Spectroscopy

The first electronic transition (à ← X̃) of liquid water (H2O and D2O) on an α-alumina substrate was studied using variable angle attenuated total reflection far-ultraviolet (VA-ATR-FUV) spectroscopy in the wavelength region 140-180 nm (8.86-6.89 eV). A variation in the penetration depth of the evanescent wave of a probe light (25-19 nm) directly determined individual FUV spectra associated with bulk water (distance from the alumina surface >2 nm) and interfacial water (<2 nm). We found that the à ← X̃ band of the interfacial water was markedly blue-shifted and red-tailed relative to the bulk water. The electronic state difference of the interfacial water from the bulk water mainly arose from the hydrogen-bond structure and energy affected by the alumina surface.

Mosaic of Water Orientation Structures at a Neutral Zwitterionic Lipid/Water Interface Revealed by Molecular Dynamics Simulations

Ordering of water structures near the surface of biological membranes has been recently extensively studied using interface-selective techniques like vibrational sum frequency generation (VSFG) spectroscopy. The detailed structures of interface water have emerged for charged lipids, but those for neutral zwitterionic lipids remain obscure. We analyze an all-atom molecular dynamics (MD) trajectory of a hydrated 1-palmitoyl-2-oleoyl-sn-glycero-3-phosphocholine bilayer to characterize the orientation of interface waters in different chemical environments. The structure and dynamics of interfacial waters strongly depend on both their vertical position along the bilayer normal as well as vicinal lipid charged groups. Water orientation in the vicinity of phosphate groups is opposite to that around choline groups. The results are consistent with observed VSFG spectra and demonstrate that a mosaic of water orientation structures exists on the surface of a neutral zwitterionic phospholipid bilayer, reflecting rapid water exchange and the influence of local chemical environments.

Raman imaging at biological interfaces: applications in breast cancer diagnosis

BACKGROUND

One of the most important areas of Raman medical diagnostics is identification and characterization of cancerous and noncancerous tissues. The methods based on Raman scattering has shown significant potential for probing human breast tissue to provide valuable information for early diagnosis of breast cancer. A vibrational fingerprint from the biological tissue provides information which can be used to identify, characterize and discriminate structures in breast tissue, both in the normal and cancerous environment.

RESULTS

The paper reviews recent progress in understanding structure and interactions at biological interfaces of the human tissue by using confocal Raman imaging and IR spectroscopy. The important differences between the noncancerous and cancerous human breast tissues were found in regions characteristic for vibrations of carotenoids, fatty acids, proteins, and interfacial water. Particular attention was paid to the role played by unsaturated fatty acids and their derivatives as well as carotenoids and interfacial water.

CONCLUSIONS

We demonstrate that Raman imaging has reached a clinically relevant level in regard to breast cancer diagnosis applications. The results presented in the paper may have serious implications on understanding mechanisms of interactions in living cells under realistically crowded conditions of biological tissue.

Why Do Sulfuric Acid Coatings Influence the Ice Nucleation Properties of Mineral Dust Particles in the Atmosphere?

Laboratory studies with supermicrometer particles have shown that mineral particles coated with sulfuric acid are relatively poor ice nuclei. We investigated this phenomenon, which is of atmospheric relevance, by probing the structure of water at the mineral-aqueous acid interface as a function of the sulfuric acid concentration using sum frequency generation vibrational spectroscopy. We found that ordered water structures at water/mica interfaces drastically diminished at molarities of sulfuric acid equal to 0.5 M and totally disappeared when the molarities reached 5 M. The decrease in ordered water structures at the interface was caused by a combined effect of the decreased mica surface potential at low pH, the adsorption of sulfates on mica, and the lack of free water molecules in high concentrations of acidic solution. The good ice nucleation ability above liquid water saturation is correlated with the presence of structured water, suggesting that structured water at the interface may be needed for efficient heterogeneous ice nucleation.

Hydration of sulphobetaine and tetra(ethylene glycol)-terminated self-assembled monolayers studied by sum frequency generation vibrational spectroscopy

Sum-frequency generation (SFG) vibrational spectroscopy is used to study the surface and the underlying substrate of both homogeneous and mixed self-assembled monolayers (SAMs) of 11-mercaptoundecyl-1-sulphobetainethiol (HS(CH(2))(11)N(+)(CH(3))(2)(CH(2))(3)SO(3)(-)) and 1-mercapto-11-undecyl tetra(ethylene glycol) (HS(CH(2))(11)O(CH(2)CH(2)O)(4)OH) with an 11-mercapto-1-undecanol (HS(CH(2))(11)OH) diluent. SFG results on the C-H region of the dry and hydrated SAMs gave an in situ look into the molecular orientation and suggested an approach to maximize signal-to-noise ratio on these difficult to analyze hydrophilic SAMs. Vibrational fingerprint studies in the 3000-3600 cm(-1) spectral range for the SAMs exposed serially to air, water, and deuterated water revealed that a layer of tightly bound structured water was associated with the surface of a nonfouling monolayer but was not present on a hydrophobic N-undecylmercaptan (HS(CH(2))(10)CH(3)) control. The percentage of water retained upon submersion in D(2)O correlated well with the relative amount of protein that was previously shown to absorb onto the monolayers. These results provide evidence supporting the current theory regarding the role of a tightly bound vicinal water layer in the protein resistance of a nonfouling group.

High-resolution in situ x-ray study of the hydrophobic gap at the water-octadecyl-trichlorosilane interface

The knowledge of the microscopic structure of water at interfaces is essential for the understanding of interfacial phenomena in numerous natural and technological environments. To study deeply buried liquid water-solid interfaces, high-energy x-ray reflectivity measurements have been performed. Silicon wafers, functionalized by a self-assembled monolayer of octadecyl-trichlorosilane, provide strongly hydrophobic substrates. We show interfacial density profiles with angstrom resolution near the solid-liquid interface of water in contact with an octadecyl-trichlorosilane layer. The experimental data provide clear evidence for the existence of a hydrophobic gap on the molecular scale with an integrated density deficit rhod = 1.1 A g cm(-3) at the solid-water interface. In addition, measurements on the influence of gases (Ar, Xe, Kr, N(2), O(2), CO, and CO(2)) and HCl, dissolved in the water, have been performed. No effect on the hydrophobic water gap was found.

Reduced water density at hydrophobic surfaces: effect of dissolved gases

Here, direct noninvasive neutron reflectivity measurements reveal the presence of a reduced (deuterated) water density region, with a sigmoidal density profile at the hydrophobic silane-water interface that depends on the type and concentration of dissolved gases in the water. Removal of dissolved gases decreases the width of the reduced water density region, and their reintroduction leads to its increase. When compared with recent computer simulations, a locally fluctuating density profile is proposed, whereas preexisting nanobubbles are excluded. The presence of a fluctuating reduced water density region between two hydrophobic surfaces and the attractive "depletion force" to which it leads may help explain the hydrophobic force and its reported diminution in deaerated water. Our results are also quantitatively consistent with recent dynamic surface force apparatus results that drastically revise previous estimates of the slip length of water flowing past hydrophobic surfaces from microns to approximately 20 nm. Our observations, therefore, go a long way toward reconciling three quite different types of experiments and phenomena: water depletion at hydrophobic surfaces, water slip at hydrophobic surfaces, and the hydrophobic interaction.