Probing Effect of 6 MeV Electron Beam Irradiation on Haemoglobin Protein Using Spectroscopic Techniques

In this work, we study the effect of 6 MeV electron beam irradiation on the physicochemical properties of lyophilized Human Haemoglobin A (HbA). Electron beams generated from Race Track Microtron accelerator with energy 6 MeV were used to irradiate HbA at fluences of 5 × 1014 e-/cm2 and 10 × 1014 e-/cm2. Pristine and electron beam irradiated HbA were characterized using UV-visible and Fourier transform infrared spectroscopy (FTIR) spectroscopy. The interfacial tension of the aqueous solutions of HbA are also analysed by pendant drop method. Absorbance intensity, % transmittance and interfacial tension decrease with fluence. The peak position of the Soret band (λsoret = 404 nm) remains unaffected by the fluences. FTIR spectroscopy confirms the changes in the secondary structure of the haemoglobin. In the amide band I, the percentage of α-helix reduced from 8% to 1%, and an increase in β-sheet (19% to 29%) and β helix (6.3% to 15%) is observed. Interfacial tension decreases from 46.0 mN/m and 44.0 mN/m with increase in irradiation dose. These finding provides realistic guideline for biological cells exposure to electron beam radiation doses.

In Situ Engineering of Conducting Polymer Nanocomposites at Liquid/Liquid Interfaces: A Perspective on Fundamentals to Technological Significance

The conducting polymers have continuously been hybridized with their counterparts to overcome the intrinsic functional limitations compared to the metallic or inorganic analogs. Remarkably, the liquid/liquid interface-assisted methods represent an efficient and facile route for developing fully tunable metamaterials for various applications. The spontaneous adsorption of nanostructures at a quasi-two-dimensional interface is energetically favorable due to the reduction in interfacial tension, interfacial area, and interfacial energy (Helmholtz free energy). This Perspective highlights the fundamentals of nanostructure adsorption leading to hierarchical architecture generation at the interface from an experimentalist's point of view. Thereafter, the essential applications of the conducting polymer/nanocomposites synthesized at the interface emphasize the capability of the interface to tune functional materials. This Perspective also summarizes the future challenges and the use of the known fundamental aspects in overcoming the functional limitations of polymer/nanomaterial composites and also provides some future research directions.

Ultrasound-Induced Adsorption of Acousto-Responsive Microgels at Water-Oil Interface

Ultrasonic mixing is a well-established method to disperse and mix substances. However, the effects of ultrasound on dispersed soft particles as well as on their adsorption kinetics at interfaces remain unexplored. Ultrasound not only accelerates the movement of particles via acoustic streaming, but recent research indicates that it can also manipulate the interaction of soft particles with the surrounding liquid. In this study, it evaluates the adsorption kinetics of microgel at the water-oil interface under the influence of ultrasound. It quantifies how acoustic streaming accelerates the reduction of interfacial tension. It uses high-frequency and low-amplitude ultrasound, which has no destructive effects. Furthermore, it discusses the ultrasound-induced shrinking and thus interfacial rearrangement of the microgels, which plays a secondary but non-negligible role on interfacial tension reduction. It shows that the decrease in interfacial tension due to the acoustic streaming is stronger for microgels with higher cross-linker density. Moreover, it shows that ultrasound can induce a reversible decrease in interfacial tension due to the shrinkage of microgels at the interface. The presented results may lead to a better understanding in any field where ultrasonic waves meet soft particles, e.g., controlled destabilization in foams and emulsions or systems for drug release.

Study on the Performance Mechanism of Polyformaldehyde Glycol Ether Polymer for Crude Oil Recovery Enhancement

The demand for energy continues to increase as the global economy continues to grow. The role of oilfield chemicals in the process of oil and gas exploration, development, and production is becoming more and more important, and the demand is rising year by year. The support of national policies and the formulation of environmental protection regulations have put forward higher requirements for oilfield chemical products, which has promoted the innovative research and development and market application of oilfield chemicals. Polyformaldehyde glycol ether polymer (PGEP) is simple to synthesize, easily biodegradable, green and environmentally friendly, and in line with the development trend of chemicals used in oil and gas development. The interfacial tension performance of PGEP after compounding with different surfactants can reach as low as 0.00034 mN/m, which meets the requirements of the oilfield (interfacial tension ≤ 5 × 10-3 mN/m). The best oil washing efficiency performance of PGEP compounded with different surfactants reached 78.2%, which meets the requirements of the oilfield (oil washing efficiency ≥ 40%). The fracturing fluid drainage efficiency of PGEP after compounding with different surfactants reaches 22%, which meets the requirements of the oilfield (drainage efficiency ≥ 15%). The surface interfacial tension of the system remains constant after the concentration exceeds 0.2% and decreases with lower concentrations. The drainage efficiency increases with increasing concentrations in the range below 0.6%. It was determined that PGEP can be used as a surfactant instead of fatty-alcohol ethoxylates (FAE) in oilfield development.

New Trends in Biosurfactants: From Renewable Origin to Green Enhanced Oil Recovery Applications

Enhanced oil recovery (EOR) processes are technologies used in the oil and gas industry to maximize the extraction of residual oil from reservoirs after primary and secondary recovery methods have been carried out. The injection into the reservoir of surface-active substances capable of reducing the surface tension between oil and the rock surface should favor its extraction with significant economic repercussions. However, the most commonly used surfactants in EOR are derived from petroleum, and their use can have negative environmental impacts, such as toxicity and persistence in the environment. Biosurfactants on the other hand, are derived from renewable resources and are biodegradable, making them potentially more sustainable and environmentally friendly. The present review intends to offer an updated overview of the most significant results available in scientific literature on the potential application of biosurfactants in the context of EOR processes. Aspects such as production strategies, techniques for characterizing the mechanisms of action and the pros and cons of the application of biosurfactants as a principal method for EOR will be illustrated and discussed in detail. Optimized concepts such as the HLD in biosurfactant choice and design for EOR are also discussed. The scientific findings that are illustrated and reviewed in this paper show why general emphasis needs to be placed on the development and adoption of biosurfactants in EOR as a substantial contribution to a more sustainable and environmentally friendly oil and gas industry.

Oil and Organic Liquids Incorporation into Fresh Geopolymer Pastes Using Suitable Quaternary Ammonium Surfactants

The direct incorporation of low viscosity organic liquids (OL) such as dodecane and tributylphosphate (TBP) into fresh geopolymers (GP) is difficult and generally leads to variable amounts of un-incorporated OL remaining outside the hardened geopolymer. Experimentally, it is observed that a regular torque increase during OL incorporation corresponds to a suitable dispersion of the OL in the form of fine micrometric droplets. This can be obtained for TBP and dodecane by adding a small quantity of quaternary ammoniums salts (QAs) such as cetyltrimethylammonium bromide (CTAB). Shorter alkyl chains QAs, such as hexamethyltrimethylammonium (HMTA) can also be used but with a reduced efficiency. The positive impact of CTAB is then confirmed by the Washburn capillary rise method, showing that the interactions between TBP and CTAB-modified metakaolin are weaker compared to untreated powder. Finally, it is observed that the incorporation of TBP into geopolymer slurries is much easier than the incorporation of dodecane. The low interfacial tension measured between TBP and the activating solution (around 8 mN·m -1 ), contrasting with dodecane (29 mN·m -1 ), explains that the dispersion of TBP droplets in fresh metakaolin suspensions is more efficient.

Demulsification of Silica Stabilized Pickering Emulsions Using Surface Freezing Transition of CTAC Adsorbed Films at the Tetradecane-Water Interface

The adsorbed film of cetyltrimethylammonium chloride (CTAC) at the tetradecane (C14) - water interface undergoes a first-order surface transition from two-dimensional liquid to solid states upon cooling. In this paper, we utilized this surface freezing transition to realize a spontaneous demulsification of Pickering emulsions stabilized by silica particles. In the temperature range above the surface freezing transition, the interfacial tension of silica laden oil-water interface was lower than CTAC adsorbed film, hence, stable Pickering emulsion was obtained by vortex mixing. However, the interfacial tension of CTAC adsorbed film decreased rapidly below the surface freezing temperature and became lower than the silica laden interface. The reversal of the interfacial tensions between silica laden and CTAC adsorbed films gave rise to Pickering emulsion demulsification by the desorption of silica particles from the oil-water interface. The exchange of silica particles and CTAC at the surface of emulsion droplets was also confirmed experimentally by using phase modulation ellipsometry at the oil-water interface.

Effect of the Interfacial Tension on the Stability of Silica Stabilized Pickering Emulsions near the Lower Critical Solution Temperature of 2,6-Lutidine - Water Mixtures

In this paper, the kinetic stability of Pickering emulsions stabilized by spherical silica particles (100 nm in diameter) was examined in the water - 2,6-lutidine mixture. In the close vicinity of the lower critical solution temperature, Pickering emulsions were unstable due to the ultra-low liquid-liquid interfacial tension but increased their stability with increasing the temperature. In this system, the interfacial tension obeys universal scale law and can be tuned by temperature without adding any surface-active agents. Owing to this unique feature, we elucidated the relation between the interfacial tension and the stability of Pickering emulsions.

Role of Temperature-Dependent Interfacial Tension on Shear Wave Velocity for Energy Geosystems

Interfacial tension varies with temperature. This paper investigates the effects of temperature-dependent interfacial tension on shear wave velocity. We designed a nylon cell equipped with bender elements in a cross-hole configuration to measure the shear wave velocity of nine sand-silt mixtures with different degrees of saturation (S = 0%, 2.5%, 5%, 10%, and 100%). All specimens were subjected to a temperature change from 10 °C to 1 °C. The results demonstrate that shear wave velocity tends to be very sensitive to changes in temperature at a low degree of saturation. Particle-scale analyses overlapped with the experimental results and captured the critical role of temperature-dependent interfacial tension in small-strain skeletal stiffness. In fact, the temperature should be considered during laboratory and field shear modulus measurements of the long-term performance of energy geosystems subjected to thermally induced repetitive loads.

Interfacial Tension-Impelled Self-Assembly and Morphology Tuning of Poly(3,4-ethylene dioxythiophene)/Tellurium Nanocomposites at Various Liquid/Liquid Interfaces

Compared to the enormous number of nanostructures that have been documented, the variety of nanostructures produced by organic polymerization is rather limited. We devised an unconventional route and a sustainable approach to distribute tellurium nanoparticles (Te NPs) in a poly(3,4-ethylene dioxythiophene) (PEDOT) matrix to form semiconducting organic-inorganic nanocomposites for potential applications in electrochemical sensing. The adopted strategy of in situ liquid/liquid interface-assisted polymerization aids in the formation of intimately tethered Te NPs on the PEDOT polymer chains, thereby preventing the aggregation of Te NPs. The untapped versatility inherent to using biphasic systems for interfacial polymerization is explored at three interface systems of immiscible solvents: chloroform/water, dichloromethane/water, and hexane/water, giving rise to PEDOT/Te nanocomposite (PTeNC) of distinct morphology. Chemical nature, crystallinity, and morphology investigations proved the successful formation of PTeNC in different interface systems. Consequently, the temporal evolution of interfacial tension in the preferential adsorption of nanoparticles and final product morphology was monitored by pendant drop tensiometry. Owing to the role of morphology, PTeNC synthesized at the hexane/water interface showcased the best electrocatalytic behavior toward nonenzymatic detection of l-ascorbic acid, an essential nutritional factor, and a neuromodulator with a limit of detection of 0.66 μM and excellent sensitivity, selectivity, and reproducibility. Hence, we envision that interface-assisted polymerization offers a nascent and robust strategy for encapsulating unusual electrode materials in polymeric matrices.

Tissue Morphogenesis Through Dynamic Cell and Matrix Interactions

Multicellular organisms generate tissues of diverse shapes and functions from cells and extracellular matrices. Their adhesion molecules mediate cell-cell and cell-matrix interactions, which not only play crucial roles in maintaining tissue integrity but also serve as key regulators of tissue morphogenesis. Cells constantly probe their environment to make decisions: They integrate chemical and mechanical information from the environment via diffusible ligand- or adhesion-based signaling to decide whether to release specific signaling molecules or enzymes, to divide or differentiate, to move away or stay, or even whether to live or die. These decisions in turn modify their environment, including the chemical nature and mechanical properties of the extracellular matrix. Tissue morphology is the physical manifestation of the remodeling of cells and matrices by their historical biochemical and biophysical landscapes. We review our understanding of matrix and adhesion molecules in tissue morphogenesis, with an emphasis on key physical interactions that drive morphogenesis.

Tailoring Properties of Hyaluronate-Based Core-Shell Nanocapsules with Encapsulation of Mixtures of Edible Oils

Dispersions of core-shell nanocapsules (nanoemulsion) composed of liquid oil cores and polysaccharide-based shells were fabricated with emulsification using various mixtures of edible oils and amphiphilic hyaluronate derivatized with 12-carbon alkyl chains forming the shells. Such nanocapsules, with typical diameters in the 100-500 nm range, have been previously shown as promising carriers of lipophilic bioactive compounds. Here, the influence of some properties of the oil cores on the size and stability of the capsules were systematically investigated using oil binary mixtures. The results indicated that, in general, the lower the density, viscosity, and interfacial tension (IFT) between the oil and aqueous polymer solution phases, the smaller the size of the capsules. Importantly, an unexpected synergistic reduction of IFT of mixed oils was observed leading to the values below the measured for individual oils. Such a behavior may be used to tailor size but also other properties of the nanocapsules (e.g., stability, solubility of encapsulated compounds) that could not be achieved applying just a single oil. It is in high demand for applications in pharmaceutical or food industries and opens opportunities of using more complex combinations of oils with more components to achieve an even further reduction of IFT leading to even smaller nanocapsules.

Monolayer/Bilayer Equilibrium of Phospholipids in Gel or Liquid States: Interfacial Adsorption via Monomer or Liposome Diffusion?

Phospholipids (PLs) are widely used in the pharma industry and a better understanding of their behavior under different conditions is helpful for applications such as their use as medical transporters. The transition temperature Tm affects the lipid conformation and the interfacial tension between perfluoroperhydrophenanthrene (PFP) and an aqueous suspension of 1,2-dipalmitoyl-sn-glycero-3-phosphatidylcholine (DPPC), 1,2-distearoyl-sn-glycero-3-phosphatidylcholine (DSPC), as well as a mixture of these PLs with cholesterol. Interfacial tensions were measured with the Du Noüy ring at quasi-equilibrium; the area per molecule was calculated according to the Gibbsian approach and a time-dependent tension gradient. Results show that the time tε to reach quasi-equilibrium was shorter when the temperature was above Tm, indicating a faster adsorption process (tε,DPPC,36 °C = 48 h, tε,DPPC,48 °C = 24 h) for PL in the liquid crystalline state than in the gel state (T < Tm). In addition, concentration-dependent results of the interfacial tension revealed that above the respective Tm and at all concentrations c > 0.1 mM, the average minimum interfacial tension for DPPC and DSPC (14.1 mN/m and 15.3 mN/m) does not differ significantly between those two lipids. Equilibrium between monolayers and bilayers shows that for T < Tm, surface pressures ∏ ≈ 31 mN/m are reached while for T > Tm, ∏ ≈ 41 mN/m. Mixtures with cholesterol only reach ∏ ≤ 31 mN/m Tm, with no significant difference between the two PLs. The higher interfacial tension of the mixture indicates stabilization of the liposomal conformation in the aqueous phase by the addition of cholesterol. The high diffusion coefficients show that adsorption is mainly based on liposomes.

Effect of Composition and Size on Surface Properties of Anti-Cancer Nanoparticles

Liposomal formulations offer significant advantages as anticancer drug carriers for targeted drug delivery; however, due to their complexity, clinical translation has been challenging. In addition, liposomal product manufacturing has been interrupted in the past, as was the case for Doxil® (doxorubicin hydrochloride liposome injection). Here, interfacial tension (IFT) measurements were investigated as a potential physicochemical characterization tool to aid in liposomal product characterization during development and manufacturing. A pendant drop method using an optical tensiometer was used to measure the interfacial tension of various analogues of Doxil® liposomal suspensions in air and in dodecane. The effect of liposome concentration, formulation (PEG and cholesterol content), presence of encapsulated drug, as well as average particle size was analyzed. It was observed that Doxil® analog liposomes demonstrate surfactant-like behavior with a sigmoidal-shape interfacial tension vs. concentration curve. This behavior was heavily dependent on PEG content, with a complete loss of surfactant-like behavior when PEG was removed from the formulation. In addition to interfacial tension, three data analyses were identified as able to distinguish between formulations with variations in PEG, cholesterol, and particle size: (i) polar and non-polar contribution to interfacial tension, (ii) liposomal concentration at which the polar and non-polar components were equal, and (iii) rate of interfacial tension decay after droplet formation, which is indicative of how quickly liposomes migrate from the bulk of the solution to the surface. We demonstrate for the first time that interfacial tension can be used to detect certain liposomal formulation changes, such as PEG content, encapsulated drug presence, and size variability, and may make a useful addition to physicochemical characterization during development and manufacturing of liposomal products.

Hot and Cold: Photochemical Weathering Mediates Oil Properties and Fate Differently Depending on Seawater Temperature

Photochemical weathering transforms petroleum oil and changes its bulk physical properties, as well as its partitioning into seawater. This transformation process is likely to occur in a cold water marine oil spill, but little is known about the behavior of photochemically weathered oil in cold water. We quantified the effect of photochemical weathering on oil properties and partitioning across temperatures. Compared to weathering in the dark, photochemical weathering increases oil viscosity and water-soluble content, decreases oil-seawater interfacial tension, and slightly increases density. Many of these photochemical changes are much larger than changes caused by evaporative weathering. Further, the viscosity and water-soluble content of photochemically weathered oil are more temperature-sensitive compared to evaporatively weathered oil, which changes the importance of key fate processes in warm versus cold environments. Compared to at 30 °C, photochemically weathered oil at 5 °C would have a 16× higher viscosity and a 7× lower water-soluble content, resulting in lower entrainment and dissolution. Collectively, the physical properties and thus fate of photochemically weathered oil in a cold water spill may be substantially different from those in a warm water spill. These differences could affect the choice of oil spill response options in cold, high-light environments.

Pure Graphene Acts as an "Entropic Surfactant" at the Octanol-Water Interface

Graphene oxide (GO) has proved itself as a nanomaterial capable of acting as a surfactant by lowering the interfacial tension of the oil-water interface due to its polar oxygen groups. However, the surfactant behavior of the pure graphene sheet─since prevention of edge oxidation in experimental setups is nontrivial─is still an unresolved issue in graphene research despite significant progress in the field in recent years. Here, we conduct both atomistic and coarse-grained simulations to demonstrate that─surprisingly─even pristine graphene, which only consists of hydrophobic carbon atoms, is attracted to the octanol-water interface and consequently reduces its surface tension by 2.3 k_BT/nm² or about 10 mN/m. Interestingly, the location of the free energy minimum is not precisely at the oil-water interface itself but is rather buried about two octanol layers into the octanol phase, being about 0.9 nm from the water phase. We demonstrate that the observed surfactant behavior is purely entropically driven and can be attributed to the unfavorable lipid-like structuring of octanol molecules at the free octanol-water interface. In essence, graphene enhances the inherent lipid-like behavior of octanol at the water interface rather than directly acting as a surfactant. Importantly, graphene does not display surfactant-like behavior in corresponding Martini coarse-grained simulations of the octanol-water system since the free liquid-liquid interface loses essential structure at the lower coarse-grained resolution. However, a similar surfactant behavior is recovered in coarse-grained simulations of longer alcohols such as dodecan-1-ol and hexadecan-1-ol. The observed discrepancies at different model resolutions enable us to construct a comprehensive model of the surfactant behavior of graphene at the octanol-water interface. The here-gained insights may facilitate the broader utilization of graphene in numerous domains of nanotechnology. Furthermore, since a drug's octanol-water partition coefficient is a crucial physicochemical parameter in rational drug discovery, we also believe that the universality of the here-illustrated entropic surfactant behavior of planar molecules deserves special attention in the drug design and development field.

Preparation of Multifunctional Surfactants Derived from Sodium Dodecylbenzene Sulfonate and Their Use in Oil-Field Chemistry

Four products were obtained from sodium dodecylbenzene sulfonate (SDBS) and formaldehyde (40% solution) using a simple reaction. The products were characterized by TGA, IR, UV and MS to confirm the major chemicals in each sample. The new products could reduce the interfacial tension between oil and water in the experimental temperature range further compared to SDBS. The emulsion ability was also enhanced by SDBS-1 to SDBS-4. The oil-displacement efficiencies of SDBS-1 to SDBS-4 were obviously higher than that of SDBS, and the oil-displacement efficiency of SDBS-2 was the best, with an efficiency of 25%. The experimental results all indicate that these products have an excellent ability to reduce oil-water interfacial tension and that they can be used in the oil and petrochemical industry for oil production and have certain practical uses.

Cellular proteins act as surfactants to control the interfacial behavior and function of biological condensates

Interfacial tension governs the behaviors and physiological functions of multiple biological condensates during diverse biological processes. Little is known about whether there are cellular surfactant factors that regulate the interfacial tension and functions of biological condensates within physiological environments. TFEB, a master transcription factor that controls expression of autophagic-lysosomal genes, assembles into transcriptional condensates to control the autophagy-lysosome pathway (ALP). Here, we show that interfacial tension modulates the transcriptional activity of TFEB condensates. MLX, MYC, and IPMK act as synergistic surfactants to decrease the interfacial tension and consequent DNA affinity of TFEB condensates. The interfacial tension of TFEB condensates is quantitatively correlated to their DNA affinity and subsequent ALP activity. The interfacial tension and DNA affinity of condensates formed by TAZ-TEAD4 are also regulated by the synergistic surfactant proteins RUNX3 and HOXA4. Our results indicate that the interfacial tension and functions of biological condensates can be controlled by cellular surfactant proteins in human cells.

Dynamic Molecular Simulation of Polyethylene/Organoclay Nanocomposites for Their Physical Properties and Foam Morphology

Polyethylene materials are of great interest to be used in many applications due to their many advantageous characteristics. It is light, highly chemical resistant, easy to process, low in cost and has good mechanical properties. Polyethylene is widely used as a cable-insulating material. However, research is still needed to further improve its insulation quality and properties. In this study, an experimental and alternative approach through a dynamic modeling method was conducted. The main objective was to investigate the effect of modified organoclay concentration on the properties of polyethylene/organoclay nanocomposites by observing their characterization and optical and mechanical properties. The thermogram curve reveals that 2 wt% organoclay used has the highest crystallinity (46.7%) while the highest amount of organoclay used produced the lowest crystallinity (31.2%). The presence of cracks was also observed mostly in the nanocomposite with higher content of organoclay, usually where 2.0 wt% and above of organoclay was used. Morphological observation from simulation results supports the experimental work. Only small pores were observed to form in lower concentrations, and as the concentration was increased to 2.0 wt% and above, the pores present became larger in size. Increasing the concentration of organoclay up to 2.0 wt% reduced the interfacial tension while increasing the concentration above 2.0 wt% did not bring any changes to the interfacial tension value. Different formulations produced different behavior of nanocomposite. Hence the control of the formulation was important to control the final result of the products for appropriate application in different sectors of industry.

The Synergistic Effects between Sulfobetaine and Hydrophobically Modified Polyacrylamide on Properties Related to Enhanced Oil Recovery

In order to explore the mechanism responsible for the interactions in the surfactant-polymer composite flooding and broaden the application range of the binary system in heterogeneous oil reservoirs, in this paper, the influences of different surfactants on the viscosity of two polymers with similar molecular weights, partially hydrolyzed polyacrylamide (HPAM) and hydrophobically modified polyacrylamide (HMPAM), were studied at different reservoir environments. In addition, the relationship between the surfactant-polymer synergistic effects and oil displacement efficiency was also investigated. The experimental results show that for HPAM, surfactants mainly act as an electrolyte to reduce its viscosity. For HMPAM, SDBS and TX-100 will form aggregates with the hydrophobic blocks of polymer molecules, reducing the bulk viscosity. However, zwitterionic surfactant aralkyl substituted alkyl sulfobetaine BSB molecules can build "bridges" between different polymer molecules through hydrogen bonding and electrostatic interaction. After forming aggregates with HMPAM molecules, the viscosity will increase. The presence of two polymers all weakened the surfactant oil-water interfacial membrane strength to a certain extent, but had little effect on the interfacial tension. The synergistic effect of the "bridge" between HMPAM and BSB under macroscopic conditions also occurs in the microscopic pores of the core, which has a beneficial effect on improving oil recovery.

How to Regulate the Migration Ability of Emulsions in Micro-Scale Pores: Droplet Size or Membrane Strength?

Micro visualization has become an important means of solving colloid and interface scientific problems in enhanced oil recovery. It can establish a relationship between a series of performance evaluations of an oil-water interface under macroscopic dimensions and the actual application effect in confined space, and more truly and reliably reflect the starting and migration behavior of crude oil or emulsion in rock pores. In this article, zwitterionic surfactant alkyl sulfobetaine (ASB) and anionic extended surfactant alkyl polyoxypropylene sulfate (A145) were employed as flooding surfactants. The macroscopic properties of the surfactant solutions, such as the oil-water interfacial tension (IFT), the interfacial dilational rheology and the viscosity of crude oil emulsions, have been measured. At the same time, we link these parameters with the oil displacement effect in several visual glass models and confirm the main factors affecting the migration ability of emulsions in micro-scale pores. The experimental results show that ASB reduces the IFT through mixed adsorption with crude oil fractions. The flat arrangement of the large hydrophilic group of ASB molecules enhances the interactions between the surfactant molecules on the oil-water interface. Compared with sulfate, betaine has higher interfacial membrane strength and emulsion viscosity. A145 has a strong ability to reduce the IFT against crude oil because of the larger size effect of the PO chains at the oil side of the interface. However, the membrane strength of A145 is moderate and the emulsion does not show a viscosity-increasing effect. During the displacement process, the deformation ability of the front emulsions or oil banks is the main controlling factor of the displacement efficiency, which is determined by the membrane strength and emulsion viscosity. The strong interfacial membrane strength and the high emulsion viscosity are not conducive to the migration of droplets in pore throats and may result in low displacement efficiency.

Dynamic Interfacial Tensions of Surfactant and Polymer Solutions Related to High-Temperature and High-Salinity Reservoir

Betaine is a new surfactant with good application prospects in high-temperature and high-salinity reservoirs. The interfacial properties of two kinds of betaine mixtures with a good synergistic effect were evaluated in this paper. On this basis, the effects of temperature-resistant, salt-resistant polymers with different contents of 2-acrylamide-2-methylpropanesulfonic acid (AMPS) on dynamic interfacial tensions (IFTs) against n-alkanes and crude oil were studied. The experimental results show that the IFTs between betaine ASB and n-alkanes can be reduced to ultra-low values by compounding with anionic surfactant petroleum sulfonate (PS) and extended anionic surfactant alkoxyethylene carboxylate (AEC), respectively. ASB@AEC is very oil-soluble with n_min value ≥14, and ASB@PS is relatively water-soluble with n_min value of 10. The water solubility of both ASB@PS and ASB@AEC is enhanced by the addition of water-soluble polymers. The HLB of the ASB@AEC solution becomes better against crude oil after the addition of polymers, and the IFT decreases to an ultra-low value as a result. On the contrary, the antagonistic effect in reducing the IFT can be observed for ASB@PS in the same case. In a word, polymers affect the IFTs of surfactant solutions by regulating the HLB.

Modeling of Interfacial Tension and Inclusion Motion Behavior in Steelmaking Continuous Casting Mold

The current work is an expansion of our previous numerical model in which we investigated the motion behavior of mold inclusions in the presence of interfacial tension effects. In this paper, we used computational fluid dynamic simulations to examine the influence of interfacial tension on inclusion motion behavior near to the solid-liquid interface (solidifying shell). We have used a multiphase model in which molten steel (SPFH590), sulfur, and alumina inclusions have been considered as different phases. In addition, we assume minimal to negligible velocity at the solid-liquid interface, and we restrict the numerical simulation to only include critical phenomena like heat transport and interfacial tension distribution in two-dimensional space. The two-phase simulation of molten steel mixed with sulfur and alumina was modeled on volume of fluid (VOF) method. Furthermore, the concentration of the surfactant (sulfur) in molten steel was defined using a species model. The surfactant concentration and temperature affect the Marangoni forces, and subsequently affects the interfacial tension applied on inclusion particles. It was found that the alteration in interfacial tension causes the inclusion particles to be pushed and swallowed near the solidifying boundaries. In addition, we have compared the computational results of interfacial tension, and it was found to be in good agreement with experimental correlations.

Use of Nanoparticles in Completion Fluids as Dual Effect Treatments for Well Stimulation and Clay Swelling Damage Inhibition: An Assessment of the Effect of Nanoparticle Chemical Nature

The objective of this study is to evaluate the role of nanoparticles with different chemical structures in completion fluids (CF) in providing a positive dual effect for well stimulation and clay swelling damage inhibition. Six types of commercial (C) or synthesized (S) nanoparticles have been incorporated into a commercial completion fluid. Doses varied between 100 and 500 mg·L^-1. CF-nanoparticles were evaluated by fluid-fluid, fluid-nanoparticle, and fluid-rock interactions. The adsorption isotherms show different degrees of affinity, which impacts on the reduction of the interfacial tension between the CF and the reservoir fluids. Fluid-fluid interactions based on interfacial tension (IFT) measurements suggest that positively charged nanoparticles exhibit high IFT reductions. Based on contact angle measurements, fluid-rock interactions suggest that ZnO-S, SiO₂-C, SiO₂-S, and ZrO₂ can adequately promote water-wet rock surfaces compared with other nanomaterials. According to the capillary number, ZnO-S and MgO-S have a higher capacity to reduce both interfacial and surface restrictions for crude oil production, suggesting that completion fluid with nanoparticles (NanoCF) can function as a stimulation agent. The clay swelling inhibition test in the presence of ZnO-S-CTAB and MgO-S-CTAB nanoparticles showed a 28.6% decrease in plastic viscosity (PV), indicating a reduction in clay swelling. The results indicate that a high-clay environment can meet the completion fluid's requirements. They also indicate that the degree of clay swelling inhibition of the nanoparticles depends on their chemical nature and dosage. Finally, displacement tests revealed that CF with nanoparticles increased the oil linear displacement efficiency.

New Prediction Model of Surface and Interfacial Energies Based on COSMO-UCE

The nature and strength of intermolecular and surface forces are the key factors that influence the solvation, adhesion and wetting phenomena. The universal cohesive energy prediction equation based on conductor-like screening model (COSMO-UCE) was extended from like molecules (pure liquids) to unlike molecules (dissimilar liquids). A new molecular-thermodynamic model of interfacial tension (IFT) for liquid-liquid and solid-liquid systems was developed in this work, which can predict the surface free energy of solid materials and interfacial energy directly through cohesive energy calculations based on COSMO-UCE. The applications of this model in prediction of IFT for water-organic, solid (n-hexatriacontane, polytetrafluoroethylene(PTFE) and octadecyl-amine monolayer)-liquid systems have been verified extensively with successful results; which indicates that this is a straightforward and reliable model of surface and interfacial energies through predicting intermolecular interactions based on merely molecular structure (profiles of surface segment charge density), the dimensionless wetting coefficient R_A/C can characterize the wetting behavior (poor adhesive (non-wetting), wetting, spreading) of liquids on the surface of solid materials very well.

Pickering Emulsions Stabilized by Chitosan/Natural Acacia Gum Biopolymers: Effects of pH and Salt Concentrations

In this study, chitosan (CT) and naturally occurring acacia gum (AG) blends were employed as emulsifiers to form a series of emulsions developed from diesel and water. Effects of pH level (3, 5, 10, and 12) and various NaCl salt concentrations (0.25-1%) on the stability, viscosity, and interfacial properties of CT-(1%)/AG-(4%) stabilized Pickering emulsions were evaluated. Bottle test experiment results showed that the stability indexes of the CT/AG emulsions were similar under acidic (3 and 5) and alkaline (10 and 12) pH media. On the other hand, the effects of various NaCl concentrations on the stability of CT-(1%)/AG-(4%) emulsion demonstrated analogous behavior throughout. From all the NaCl concentrations and pH levels examined, viscosities of this emulsion decreased drastically with the increasing shear rate, indicating pseudoplastic fluid with shear thinning characteristics of these emulsions. The viscosity of CT-(1%)/AG-(4%) emulsion increased at a low shear rate and decreased with an increasing shear rate. The presence of NaCl salt and pH change in CT/AG solutions induced a transformation in the interfacial tension (IFT) at the diesel/water interface. Accordingly, the IFT values of diesel/water in the absence of NaCl/CT/AG (without emulsifier and salt) remained fairly constant for a period of 500 s, and its average IFT value was 26.16 mN/m. In the absence of salt, the addition of an emulsifier (CT-(1%)/AG-(4%)) reduced the IFT to 16.69 mN/m. When the salt was added, the IFT values were further reduced to 12.04 mN/m. At low pH, the IFT was higher (17.1 mN/M) compared to the value of the IFT (10.8 mN/M) at high pH. The results obtained will help understand the preparation and performance of such emulsions under different conditions especially relevant to oil field applications.

A Critical Overview of ASP and Future Perspectives of NASP in EOR of Hydrocarbon Reservoirs: Potential Application, Prospects, Challenges and Governing Mechanisms

Oil production from depleted reservoirs in EOR (Enhanced Oil Recovery) techniques has significantly increased due to its huge demands in industrial energy sectors. Chemical EOR is one of the best approaches to extract the trapped oil. However, there are gaps to be addressed and studied well for quality and cost consideration in EOR techniques. Therefore, this paper addresses for the first time a systematic overview from alkaline surfactant polymer ((ASP)) and future perspectives of nano-alkaline surfactant polymer ((NASP)), its synergy effects on oil recovery improvement, and the main screening criteria for these chemicals. The previous findings have demonstrated that the optimum salinity, choosing the best concentration, using effective nano-surfactant, polymer and alkaline type, is guaranteed an ultra-low IFT (Interfacial Tension). Core flood results proved that the maximum oil is recovered by conjugating nanoparticles with conventional chemical EOR methods (surfactant, alkaline and polymer). This work adds a new insight and suggests new recommendation into the EOR application since, for the first time, it explores the role and effect of nanotechnology in a hybrid with ASP. The study illustrates detailed experimental design of using NASP and presents an optimum micro-model setup for future design of NASP flow distribution in the porous media. The presence of nano along with other chemicals increases the capillary number as well as the stability of chemicals in the solution and strengthens the effective mechanisms on the EOR.

SpiDec: Computing binodals and interfacial tension of biomolecular condensates from simulations of spinodal decomposition

Phase separation of intrinsically disordered proteins (IDPs) is a phenomenon associated with many essential cellular processes, but a robust method to compute the binodal from molecular dynamics simulations of IDPs modeled at the all-atom level in explicit solvent is still elusive, due to the difficulty in preparing a suitable initial dense configuration and in achieving phase equilibration. Here we present SpiDec as such a method, based on spontaneous phase separation via spinodal decomposition that produces a dense slab when the system is initiated at a homogeneous, low density. After illustrating the method on four model systems, we apply SpiDec to a tetrapeptide modeled at the all-atom level and solvated in TIP3P water. The concentrations in the dense and dilute phases agree qualitatively with experimental results and point to binodals as a sensitive property for force-field parameterization. SpiDec may prove useful for the accurate determination of the phase equilibrium of IDPs.

Simulation of Inclusion Particle Motion Behavior under Interfacial Tension in Continuous Casting Mold

Inclusions entrapped by the solidifying front during continuous casting adversely affect the properties of the final steel products. In this study, we investigated the effect of the interfacial tension due to surfactant concentration, particularly sulfur, on alumina inclusion motion behavior during molten steel solidification in a continuous casting mold. A two-dimensional numerical model was developed in Ansys Fluent software to simulate the inclusion motion in a continuous casting mold. Further, the impacts of different values of the alumina inclusion diameter, sulfur concentration, and melt temperature were studied to understand the inclusion motion behavior. The inclusion diameter affected the inclusion distribution throughout the domain. The alumina inclusion entrapment percentage varied in the case of sulfur mixing (using an empirical relationship for modeling). It was found that the removal percentage varied according to the sulfur concentration. The addition of sulfur at concentrations from 10 ppm to 70 ppm resulted in a 4% increase in the removal of alumina inclusions (trapped in the solidifying shell), except for the 100-ppm case. Smaller-sized inclusion particles had a 25% higher chance of entrapment at the top level of the mold. Under the effect of a higher surface tension gradient between inclusions and the melt, the predicted findings show that inclusions were vulnerable to engulfment by the solidification front.

Adhesion-Based Self-Organization in Tissue Patterning

Since the proposal of the differential adhesion hypothesis, scientists have been fascinated by how cell adhesion mediates cellular self-organization to form spatial patterns during development. The search for molecular tool kits with homophilic binding specificity resulted in a diverse repertoire of adhesion molecules. Recent understanding of the dominant role of cortical tension over adhesion binding redirects the focus of differential adhesion studies to the signaling function of adhesion proteins to regulate actomyosin contractility. The broader framework of differential interfacial tension encompasses both adhesion and nonadhesion molecules, sharing the common function of modulating interfacial tension during cell sorting to generate diverse tissue patterns. Robust adhesion-based patterning requires close coordination between morphogen signaling, cell fate decisions, and changes in adhesion. Current advances in bridging theoretical and experimental approaches present exciting opportunities to understand molecular, cellular, and tissue dynamics during adhesion-based tissue patterning across multiple time and length scales.

Macromolecular Regulation of the Material Properties of Biomolecular Condensates

Biomolecular condensates inside cells contain dozens to hundreds of macromolecular components and are surrounded by many others. Our computational studies predicted that macromolecular regulators have matching effects on the phase equilibrium and interfacial tension of condensates. Here we validate this prediction experimentally and characterize the effects of macromolecular regulators on other material properties, including viscoelasticity and fusion speed. Local melting due to the heating of a laser beam and turbidity assay both show that Ficoll70 raises the melting temperature of condensates formed by polylysine:heparin mixtures, whereas optical-tweezer measurements reveal parallel increases in interfacial tension. Additional optical-tweezer experiments report elevations in viscosity and shear relaxation time but also fusion speed by Ficoll70. The fusion speed is higher than predicted by modeling the condensates as purely viscous, demonstrating viscoelasticity and shear thinning. These results illustrate the ample opportunities for macromolecular regulators to tune material properties for proper functions of biomolecular condensates.

Detection of PFAS and Fluorinated Surfactants Using Differential Behaviors at Interfaces of Complex Droplets

Contamination of per- and polyfluoroalkyl substances (PFAS) in water supplies will continue to have serious health and environmental consequences. Despite the importance of monitoring the concentrations of PFAS at potential sites of contamination and at treatment plants, there are few suitable and rapid on-site methods. Many nonconventional techniques do not possess the necessary selectivity and sensitivity to distinguish PFAS from other surface-active components and to quantify the low concentrations in real-world conditions. Herein, we report a novel and rapid method for the detection of perfluorooctane sulfonate (PFOS) and perfluorooctanoic acid (PFOA) by leveraging their differential behaviors at the interfaces of emissive complex droplets. Measurement of surface and interfacial tensions via a force tensiometer reveals that PFAS preferentially self-assemble at the water-fluorocarbon oil interface (F/W) rather than the water-hydrocarbon oil interface (H/W). We also observe an opposite behavior for hydrocarbon surfactants. This difference in interfacial behavior produces distinct effects on the morphological change and optical emission of biphasic oil-in-water droplets. The change in the intensity of fluorescence emission, measured with a simple spectroscopic setup, correlates with the concentrations of PFAS. We also demonstrate that the range of detection and sensitivity can be tuned by adjusting the initial composition of the complex droplets. Our results illustrate an alternative mode of sensors that may provide a rapid and on-site detection of PFAS.

Interfacial Properties, Wettability Alteration and Emulsification Properties of an Organic Alkali-Surface Active Ionic Liquid System: Implications for Enhanced Oil Recovery

Combinatory flooding techniques evolved over the years to mitigate various limitations associated with unitary flooding techniques and to enhance their performance as well. This study investigates the potential of a combination of 1-hexadecyl-3-methyl imidazolium bromide (C₁₆mimBr) and monoethanolamine (ETA) as an alkali–surfactant (AS) formulation for enhanced oil recovery. The study is conducted comparative to a conventional combination of cetyltrimethylammonium bromide (CTAB) and sodium metaborate (NaBO₂). The study confirmed that C₁₆mimBr and CTAB have similar aggregation behaviors and surface activities. The ETA–C₁₆mimBr system proved to be compatible with brine containing an appreciable concentration of divalent cations. Studies on interfacial properties showed that the ETA–C₁₆mimBr system exhibited an improved IFT reduction capability better than the NaBO₂–CTAB system, attaining an ultra-low IFT of 7.6 × 10⁻³ mN/m. The IFT reduction performance of the ETA–C₁₆mimBr system was improved in the presence of salt, attaining an ultra-low IFT of 2.3 × 10⁻³ mN/m. The system also maintained an ultra-low IFT even in high salinity conditions of 15 wt% NaCl concentration. Synergism was evident for the ETA–C₁₆mimBr system also in altering the carbonate rock surface, while the wetting power of CTAB was not improved by the addition of NaBO₂. Both the ETA–C₁₆mimBr and NaBO₂–CTAB systems proved to form stable emulsions even at elevated temperatures. This study, therefore, reveals that a combination of surface-active ionic liquid and organic alkali has excellent potential in enhancing the oil recovery in carbonate reservoirs at high salinity, high-temperature conditions in carbonate formations.

DPD Simulation on the Transformation and Stability of O/W and W/O Microemulsions

The dissipative particle dynamics simulation method is adopted to investigate the microemulsion systems prepared with surfactant (H1T1), oil (O) and water (W), which are expressed by coarse-grained models. Two topologies of O/W and W/O microemulsions are simulated with various oil and water ratios. Inverse W/O microemulsion transform to O/W microemulsion by decreasing the ratio of oil-water from 3:1 to 1:3. The stability of O/W and W/O microemulsion is controlled by shear rate, inorganic salt and the temperature, and the corresponding results are analyzed by the translucent three-dimensional structure, the mean interfacial tension and end-to-end distance of H1T1. The results show that W/O microemulsion is more stable than O/W microemulsion to resist higher inorganic salt concentration, shear rate and temperature. This investigation provides a powerful tool to predict the structure and the stability of various microemulsion systems, which is of great importance to developing new multifunctional microemulsions for multiple applications.

Solvent-Free Fabrication of Biphasic Lipid-Based Microparticles with Tunable Structure

Lipid-based biphasic microparticles are generally produced by long and complex techniques based on double emulsions. In this study, spray congealing was used as a solvent-free fabrication method with improved processability to transform water-in-oil non-aqueous emulsions into spherical solid lipid-based particles with a biphasic structure (b-MPs). Emulsions were prepared by melt emulsification using different compositions of lipids (Dynasan^®118 and Compritol^®888 ATO), surfactants (Cetylstearyl alcohol and Span^®60) and hydrophilic carriers (PEGs, Gelucire^®48/16 and Poloxamer 188). First, pseudo-ternary phase diagrams were constructed to identify the area corresponding to each emulsion type (coarse emulsion or microemulsion). The hydrophobicity of the lipid mostly affected the interfacial tension, and thus the microstructure of the emulsion. Emulsions were then processed by spray congealing and the obtained b-MPs were characterized in terms of thermal and chemical properties (by DSC and FT-IR), external and internal morphology (by SEM, CLSM and Raman mapping). Solid free-flowing spherical particles (main size range 200–355 µm) with different architectures were successfully produced: microemulsions led to the formation of particles with a homogeneous internal structure, while coarse emulsions generated “multicores-shell” particles consisting of variable size hydrophilic cores evenly distributed within the crystalline lipid phase. Depending on their composition and structure, b-MPs could achieve various release profiles, representing a more versatile system than microparticles based on a single lipid phase. The formulation and technological strategy proposed, provides a feasible and cost-effective way of fabricating b-MPs with tunable internal structure and release behavior.

Essential-Oil-Loaded Nanoemulsion Lipidic-Phase Optimization and Modeling by Response Surface Methodology (RSM): Enhancement of Their Antimicrobial Potential and Bioavailability in Nanoscale Food Delivery System

Nanoencapsulation is an attractive technique used for incorporating essential oils in foods. Thus, our main goal was to formulate a novel nanoemulsion (NE) with nanoscale droplet size and lowest interfacial tension in the oil–water interface, contributing positively to the stability and the enhancement of essential oil potential. Thereby, response surface methodology (RSM), with mixture design was used to optimize the composition of the NE lipid phase. The essential oil combinations were encapsulated through high-pressure homogenization (HPH) with the binary emulsifier system (Tween 80: Gum Arabic). Then, the electrophoretic and physical properties were evaluated. We also conducted a follow-up stability and antimicrobial study that examined the stabilization mechanism of optimal NE. Thereafter, the effect of nanoencapsulation on the essential oil composition was assessed. The RSM results were best fitted into polynomial models with regression coefficient values of more than 0.95. The optimal NE showed a nanometer-sized droplet (270 nm) and lower interfacial tension (~11 mN/m), favoring negative ζ-potential (−15 mV), showing good stability under different conditions—it synergistically enhances the antimicrobial potential. GC-MS analysis showed that the use of HPH affected the active compounds, consistent with the differences in linalool and 2-Caren-10-al content. Hence, the novel nanometric delivery system contributes to food industry fortification.

The Effects of Copolymer Compatibilizers on the Phase Structure Evolution in Polymer Blends-A Review

This paper summarizes the results of studies describing the effect of block and graft copolymers on the phase structure formation and evolution in immiscible polymer blends. The main phenomenological rules for prediction of the copolymer compatibilization efficiency are briefly described and compared with selected experimental data. The results of the theories of equilibrium distribution of a copolymer between the blend interface and the bulk phases and its effect on the blend interfacial tension are summarized. The theories of the compatibilizer effect on the droplet breakup in flow are analyzed. The mechanisms of the copolymer effect on the coalescence of droplets in flow are compared and their effect on the droplet size is shown. The problems of reliable description of the effect of a copolymer on the coalescence in quiescent state are presented. Obstacles to derivation of a realistic theory of the copolymer effect on the competition between the droplet breakup and coalescence are discussed. Selected experimental data are compared with the theoretical results.

Interfacial Behavior of Solid- and Liquid-like Polyelectrolyte Complexes as a Function of Charge Stoichiometry

We systematically investigate in this work the surface activity of polyelectrolyte complex (PECs) suspensions as a function of the molar charge ratio Z (= [-]/[+]) from two model systems: the weakly and strongly interacting poly (diallyldimethylammonium chloride)/poly (acrylic acid sodium salt) (PDADMAC/PANa) and poly (diallyldimethylammonium chloride)/poly (sodium 4- styrenesulfonate) (PDADMAC/PSSNa) pairs, respectively. For both systems, the PEC surface tension decreases as the system approaches charge stoichiometry (Z = 1) whenever the complexation occurs in the presence of excess PDADMAC (Z < 1) or excess polyanion (Z > 1) consistent with an increased level of charge neutralization of PEs forming increasingly hydrophobic and neutral surface-active species. The behavior at stoichiometry (Z = 1) is also particularly informative about the physical nature of the complexes. The PDADMAC/PANa system undergoes a liquid-liquid phase transition through the formation of coacervate microdroplets in equilibrium with macroions remaining in solution. In the PDADMAC/PSSNa system, the surface tension of the supernatant was close to that of pure water, suggesting that the PSSNa-based complexes have completely sedimented, consistent with a complete liquid-solid phase separation of an out-of-equilibrium system. Besides, the high sensitivity of surface tension measurements, which can detect the presence of trace amounts of aggregates and other precursors in the supernatant, allows for very accurate determination of the exact charge stoichiometry of the complexes. Finally, the very low water/water interfacial tension that develops between the dilute phase and the denser coacervate phase in the PDADAMAC/PANa system was measured using the generalized Young-Laplace method to complete the full characterization of both systems. The overall study showed that simple surface tension measurements can be a very sensitive tool to characterize, discriminate, and better understand the formation mechanism of the different structures encountered during the formation of PECs.

Nanoparticle-Induced Disorder at Complex Liquid-Liquid Interfaces: Effects of Curvature and Compositional Synergy on Functional Surfaces

The self-assembly of surfactant monolayers at interfaces plays a sweeping role in tasks ranging from household cleaning to the regulation of the respiratory system. The synergy between different nanoscale species at an interface can yield assemblies with exceptional properties, which enhance or modulate their function. However, understanding the mechanisms underlying coassembly, as well as the effects of intermolecular interactions at an interface, remains an emerging and challenging field of study. Herein, we study the interactions of gold nanoparticles striped with hydrophobic and hydrophilic ligands with phospholipids at a liquid-liquid interface and the resulting surface-bound complexes. We show that these nanoparticles, which are themselves minimally surface active, have a direct concentration-dependent effect on the rapid reduction of tension for assembling phospholipids at the interface, implying molecular coassembly. Through the use of sum frequency generation vibrational spectroscopy, we reveal that nanoparticles impart structural disorder to the lipid molecular layers, which is related to the increased volumes that amphiphiles can sample at the curved surface of a particle. The results strongly suggest that hydrophobic and electrostatic attractions imparted by nanoparticle functionalization drive lipid-nanoparticle complex assembly at the interface, which synergistically aids lipid adsorption even when lipids and nanoparticles approach the interface from opposite phases. The use of tensiometric and spectroscopic analyses reveals a physical picture of the system at the nanoscale, allowing for a quantitative analysis of the intermolecular behavior that can be extended to other systems.

O/W Pickering Emulsions Stabilized with Cellulose Nanofibrils Produced through Different Mechanical Treatments

This work aimed at studying the stabilization of O/W Pickering emulsions using nanosized cellulosic material, produced from raw cellulose or tomato pomace through different mechanical treatments, such as ball milling (BM) and high-pressure homogenization (HPH). The cellulose nanofibrils obtained via HPH, which exhibited longer fibers with higher flexibility than those obtained via ball milling, are characterized by lower interfacial tension values and higher viscosity, as well as better emulsion stabilization capability. Emulsion stability tests, carried out at 4 °C for 28 d or under centrifugation at different pH values (2.0, 7.0, and 12.0), revealed that HPH-treated cellulose limited the occurrence of coalescence phenomena and significantly slowed down gravitational separation in comparison with BM-treated cellulose. HPH-treated cellulose was responsible for the formation of a 3D network structure in the continuous phase, entrapping the oil droplets also due to the affinity with the cellulose nanofibrils, whereas BM-treated cellulose produced fibers with a more compact structure, which did adequately cover the oil droplets. HPH-treated tomato pomace gave similar results in terms of particle morphology and interfacial tension, and slightly lower emulsion stabilization capability than HPH-treated cellulose, suggesting that the used mechanical disruption process does not require cellulose isolation for its efficient defibrillation.

Core-Shell Microcapsules from Unpurified Legume Flours

Plant-based ingredients are key building blocks for future sustainable advanced materials. Functionality is typically higher for highly purified plant-based ingredients, but this is at the expense of their sustainability value. Here, a method is introduced for creating a soft functional material, with structural elements ranging from the nanometer to the millimeter scale, directly from legume flours. Globulins from soy and pea flours are extracted in their native state at acidic pH and mixed with gum arabic, resulting in liquid-liquid phase separation into a dilute phase and a viscoelastic complex coacervate. Interfacial tensions of the coacervates, determined via AFM-based probing of capillary condensation, are found to be very low (γ = 48.5 and 32.3 μN/m for, respectively, soy and pea), thus promoting the deposition of a shell of coacervate material around oil droplets. Despite the complex nature of the starting material, the dependence of interfacial tensions on salt concentrations follows a scaling law previously shown to hold for model complex coacervates. Curing of the coacervate material into a strong and purely elastic hydrogel is shown to be possible via simple heating, both in bulk and as a shell around oil droplets, thus providing proof of principle for the fabrication of precise core-shell microcapsules directly from legume flours.

Fine-Tuning Miscibility and π-π Stacking by Alkylthio Side Chains of Donor Molecules Enables High-Performance All-Small-Molecule Organic Solar Cells

Optimization of morphology and precise control of miscibility between donors and acceptors play an important role in improving the power conversion efficiencies (PCEs) of all-small-molecule organic solar cells (SM-OSCs). Besides device optimization, methods such as additives and thermal annealing are applied for finely tuning bulk-heterojunction morphology; strategies of molecular design are also the key to achieve efficient phase separation. Here, a series of A-D-A-type small-molecule donors (SM4, SM8, and SM12) based on benzodithiophene units were synthesized with different lengths of alkylthio side chains to regulate crystallinity, and their miscibility with the acceptor (BO-4Cl) was investigated. Consequently, SM4 with a short alkylthio substituent had a high crystallization propensity, leading to the oversized molecular domains and the poor morphology of the active layer. Meanwhile, SM12 with a longer alkylthio substituent showed weak crystallinity, causing a relatively looser π-π stacking and thus adversely affecting charge-carrier transport. The SM-OSC based on the small-molecule donor SM8 with a mid-length alkylthio substituent achieved a better PCE over 13%, which was attributed to a more harmonious blend miscibility without sacrificing carrier-charge transport. Eventually, the modulation of phase separation and miscibility via controlling the lateral side chains has proven its potential in optimizing the blend morphology to aid the development of highly efficient SM-OSCs.

Study on the Effect of Nanoparticle Used in Nano-Fluid Flooding on Droplet-Interface Electro-Coalescence

Nano-fluid flooding is a new method capable of improving oil recovery; however, nanoparticles (NPs) significantly affect electric dehydration, which has rarely been investigated. The effect of silica (SiO₂) NPs on the droplet–interface coalescence was investigated using a high-speed digital camera under an electric field. The droplet experienced a fall, coalescence, and secondary droplet formation. The results revealed that the oil–water interfacial tension and water conductivity changed because of the SiO₂ NPs. The decrease of interfacial tension facilitated droplet deformation during the falling process. However, with the increase of particle concentration, the formed particle film inhibited the droplet deformation degree. Droplet and interface are connected by a liquid bridge during coalescence, and the NP concentration also resulted in the shape of this liquid bridge changing. The increase of NP concentration inhibited the horizontal contraction of the liquid bridge while promoting vertical collapse. As a result, it did not facilitate secondary droplet formation. Moreover, the droplet falling velocity decreased, while the rising velocity of the secondary droplet increased. Additionally, the inverse calculation of the force balance equation showed that the charge of the secondary droplet also increased. This is attributed to nanoparticle accumulation, which resulted in charge accumulation on the top of the droplet.

Formulation Improvements in the Applications of Surfactant-Oil-Water Systems Using the HLDN Approach with Extended Surfactant Structure

Soap applications for cleaning and personal care have been used for more than 4000 years, dating back to the pharaonic period, and have widely proliferated with the appearance of synthetic surfactants a century ago. Synthetic surfactants used to make macro-micro-nano-emulsions and foams are used in laundry and detergency, cosmetics and pharmaceuticals, food conditioning, emulsified paints, explosives, enhanced oil recovery, wastewater treatment, etc. The introduction of a multivariable approach such as the normalized hydrophilic–lipophilic deviation (HLD _N) and of specific structures, tailored with an intramolecular extension to increase solubilization (the so-called extended surfactants), makes it possible to improve the results and performance in surfactant–oil–water systems and their applications. This article aims to present an up-to-date overview of extended surfactants. We first present an introduction regarding physicochemical formulation and its relationship with performance. The second part deals with the importance of HLD _N to make a straightforward classification according to the type of surfactants and how formulation parameters can be used to understand the need for an extension of the molecule reach into the oil and water phases. Then, extended surfactant characteristics and strategies to increase performance are outlined. Finally, two specific applications, i.e., drilling fluids and crude oil dewatering, are described.

Droplet Microfluidic Optimisation Using Micropipette Characterisation of Bio-Instructive Polymeric Surfactants

Droplet microfluidics can produce highly tailored microparticles whilst retaining monodispersity. However, these systems often require lengthy optimisation, commonly based on a trial-and-error approach, particularly when using bio-instructive, polymeric surfactants. Here, micropipette manipulation methods were used to optimise the concentration of bespoke polymeric surfactants to produce biodegradable (poly(d,l-lactic acid) (PDLLA)) microparticles with unique, bio-instructive surface chemistries. The effect of these three-dimensional surfactants on the interfacial tension of the system was analysed. It was determined that to provide adequate stabilisation, a low level (0.1% (w/v)) of poly(vinyl acetate-co-alcohol) (PVA) was required. Optimisation of the PVA concentration was informed by micropipette manipulation. As a result, successful, monodisperse particles were produced that maintained the desired bio-instructive surface chemistry.

Dissipative Particle Dynamics Study on Interfacial Properties of Symmetric Ternary Polymeric Blends

We investigated the interfacial properties of symmetric ternary A_n/A_mB_m/B_n and A_n/A_m/2B_mA_m/2/B_n polymeric blends by means of dissipative particle dynamics (DPD) simulations. We systematically analyzed the effects of composition, chain length, and concentration of the copolymers on the interfacial tensions, interfacial widths, and the structures of each polymer component in the blends. Our simulations show that: (i) the efficiency of the copolymers in reducing the interfacial tension is highly dependent on their compositions. The triblock copolymers are more effective in reducing the interfacial tension compared to that of the diblock copolymers at the same chain length and concentration; (ii) the interfacial tension of the blends increases with increases in the triblock copolymer chain length, which indicates that the triblock copolymers with a shorter chain length exhibit a better performance as the compatibilizers compared to that of their counterparts with longer chain lengths; and (iii) elevating the triblock copolymer concentration can promote copolymer enrichment at the center of the interface, which enlarges the width of the phase interfaces and reduces the interfacial tension. These findings illustrate the correlations between the efficiency of copolymer compatibilizers and their detailed molecular parameters.

Hybrid Application of Nanoparticles and Polymer in Enhanced Oil Recovery Processes

Nowadays, the addition of nanoparticles to polymer solutions would be of interest; however, the feasible property of nanoparticles and their impact on oil recovery has not been investigated in more detail. This study investigates the rheology and capillary forces (interfacial tension and contact angle) of nanoparticles in the polymer performances during oil recovery processes. Thereby, a sequential injection of water, polymer, and nanoparticles; Nanosilica (SiO₂) and nano-aluminium oxide (Al₂O₃) was performed to measure the oil recovery factor. Retention decrease, capillary forces reduction, and polymer viscoelastic behavior increase have caused improved oil recovery due to the feasible mobility ratio of polymer-nanoparticle in fluid loss. The oil recovery factor for polymer flooding, polymer-Al₂O₃, and polymer-SiO₂ is 58%, 63%, and 67%, respectively. Thereby, polymer-SiO₂ flooding would provide better oil recovery than other scenarios that reduce the capillary force due to the structural disjoining pressure. According to the relative permeability curves, residual oil saturation (S_or) and water relative permeability (K_rw) are 29% and 0.3%, respectively, for polymer solution; however, for the polymer-nanoparticle solution, S_or and K_rw are 12% and 0.005%, respectively. Polymer treatment caused a dramatic decrease, rather than the water treatment effect on the contact angle. The minimum contact angle for water and polymer treatment are about 21 and 29, respectively. The contact angle decrease for polymer treatment in the presence of nanoparticles related to the surface hydrophilicity increase. Therefore, after 2000 mg L^-1 of SiO₂ concentration, there are no significant changes in contact angle.

Macromolecular regulators have matching effects on the phase equilibrium and interfacial tension of biomolecular condensates

The interfacial tension of phase-separated biomolecular condensates affects their fusion and multiphase organization, and yet how this important property depends on the composition and interactions of the constituent macromolecules is poorly understood. Here we use molecular dynamics simulations to determine the interfacial tension and phase equilibrium of model condensate-forming systems. The model systems consist of binary mixtures of Lennard-Jones particles or chains of such particles. We refer to the two components as drivers and regulators; the former has stronger self-interactions and hence a higher critical temperature (T_c ) for phase separation. In previous work, we have shown that, depending on the relative strengths of driver-regulator and driver-driver interactions, regulators can either promote or suppress phase separation (i.e., increase or decrease T_c ). Here we find that the effects of regulators on T_c quantitatively match the effects on interfacial tension (γ). This important finding means that, when a condensate-forming system experiences a change in macromolecular composition or a change in intermolecular interactions (e.g., by mutation or posttranslational modification, or by variation in solvent conditions such as temperature, pH, or salt), the resulting change in T_c can be used to predict the change in γ and vice versa. We also report initial results showing that disparity in intermolecular interactions drives multiphase coexistence. These findings provide much needed guidance for understanding how biomolecular condensates mediate cellular functions.

The C-Terminus of Perilipin 3 Shows Distinct Lipid Binding at Phospholipid-Oil-Aqueous Interfaces

Lipid droplets (LDs) are ubiquitously expressed organelles; the only intracellular organelles that contain a lipid monolayer rather than a bilayer. Proteins localize and bind to this monolayer as they do to intracellular lipid bilayers. The mechanism by which cytosolic LD binding proteins recognize, and bind, to this lipid interface remains poorly understood. Amphipathic α-helix bundles form a common motif that is shared between cytosolic LD binding proteins (e.g., perilipins 2, 3, and 5) and apolipoproteins, such as apoE and apoLp-III, found on lipoprotein particles. Here, we use pendant drop tensiometry to expand our previous work on the C-terminal α-helix bundle of perilipin 3 and the full-length protein. We measure the recruitment and insertion of perilipin 3 at mixed lipid monolayers at an aqueous-phospholipid-oil interface. We find that, compared to its C-terminus alone, the full-length perilipin 3 has a higher affinity for both a neat oil/aqueous interface and a phosphatidylcholine (PC) coated oil/aqueous interface. Both the full-length protein and the C-terminus show significantly more insertion into a fully unsaturated PC monolayer, contrary to our previous results at the air-aqueous interface. Additionally, the C-terminus shows a preference for lipid monolayers containing phosphatidylethanolamine (PE), whereas the full-length protein does not. These results strongly support a model whereby both the N-terminal 11-mer repeat region and C-terminal amphipathic α-helix bundle domains of perilipin 3 have distinct lipid binding, and potentially biological roles.

Self-shaping liquid crystal droplets by balancing bulk elasticity and interfacial tension

Liquid crystal (LC) research is rapidly expanding to include studies of curved and topologically nontrivial structures. Here, we explore the role of the bulk LC elasticity and interfacial free energy under weak thermal stimuli to achieve structural transformations in LC emulsions using two different surfactants. Our method is universal and could be used for any LC material or phase. A theoretical model for transforming LC emulsions into uniform fibers and vice versa is presented. We also show the self-shaping of smectic vesicle structures and monodispersed droplet formation at the nematic–smectic transition, utilizing the LC bulk elasticity. This work shows the potential to obtain the controllable shape of complex curved structures for a constant volume of different LCs and other soft materials.

The shape diversity and controlled reconfigurability of closed surfaces and filamentous structures, universally found in cellular colonies and living tissues, are challenging to reproduce. Here, we demonstrate a method for the self-shaping of liquid crystal (LC) droplets into anisotropic and three-dimensional superstructures, such as LC fibers, LC helices, and differently shaped LC vesicles. The method is based on two surfactants: one dissolved in the LC dispersed phase and the other in the aqueous continuous phase. We use thermal stimuli to tune the bulk LC elasticity and interfacial energy, thereby transforming an emulsion of polydispersed, spherical nematic droplets into numerous, uniform-diameter fibers with multiple branches and vice versa. Furthermore, when the nematic LC is cooled to the smectic-A LC phase, we produce monodispersed microdroplets with a tunable diameter dictated by the cooling rate. Utilizing this temperature-controlled self-shaping of LCs, we demonstrate life-like smectic LC vesicle structures analogous to the biomembranes in living systems. Our experimental findings are supported by a theoretical model of equilibrium interface shapes. The shape transformation is induced by negative interfacial energy, which promotes a spontaneous increase of the interfacial area at a fixed LC volume. The method was successfully applied to many different LC materials and phases, demonstrating a universal mechanism for shape transformation in complex fluids.