End-of-life biodegradation? how to assess the composting of polyesters in the lab and the field

The aerobic composting of biodegradable plastics can be a promising solution to the growing issue of waste accumulation. Therefore, this article offers a review of papers investigating the biodegradability of polyesters (PLA, PHB, PBS and PCL) in home- and industrial composting. Not only the thermal and biodegradation properties are discussed, but also a comparison is made between the different polyesters under the same composting conditions. From this review, it becomes clear that composting shows promise for polyester waste management. However, although several methods for assessing the composting properties of polyester have been developed, the fact that they rarely follow the same standards does not allow for a comparative analysis that would clearly define composting as the most viable solution.

Mechanically robust and flame-retardant poly(lactide)/poly(butylene adipate-co-terephthalate) composites based on carbon nanotubes and ammonium polyphosphate

In order to synchronously improve mechanical and flame retardant properties of polylactide/poly(butylene adipate-co-terephthalate) (PLA/PBAT) composites, a series of multifunctional composites containing multi-walled carbon nanotubes (CNTs), ammonium polyphosphate (APP) and a commercial multifunctional epoxy oligomer (MEO) as chain extender were prepared via melt blending. The results show that the optimal flame retardant properties of PLA5-PBAT5/10A/6C composite containing 6 % CNTs and 10 wt% APP, presented the limited oxygen index reached 28.3 % and exhibited a decrease in peak heat release rate (pHRR) and total heat release (THR) to 368 kJ/m² and 72 MJ/m², respectively because of the co-continuous phase, CNTs network and condensed effect of APP. Meanwhile, the construction of co-continuous phases endows PLA5-PBAT5 with better mechanical compared to PLA8-PBAT2 composites. The elongation at break reaches (245.9 %) and notched impact strength (16.5 kJ/m²) of PLA5-PBAT5/10A/6C were higher than the PLA8-PBAT2/10A/6C by 16.0 and 283.7 %.

Three-armed RGD-decorated starPLA-PEG nanoshuttle for docetaxel delivery

A novel star-shaped amphiphilic copolymer based on three poly(lactide)-block-poly(ethylene glycol) (PLA-PEG) terminal arms extending from a glycerol multifunctional core was newly synthesized and decorated with the tumor-targeting ligand cyclic-RGDyK peptide (Arg-Gly-Asp-D-Tyr-Lys) to be eventually formulated in polymeric micelles incorporating a suitable anticancer drug (i.e., Docetaxel, DTX; drug loading 16 %, encapsulation efficiency 69 %). The biological profile of unloaded micelles (RGD-NanoStar) was studied on Human Adipose-derived Mesenchymal Stem Cells (Ad-MSCs) as health control, pointing out the absence of toxicity. Surprisingly, an unprecedented effect on cell viability was exerted by RGD-NanoStar, comparable to that of the free DTX, on tumoral MDA-MB 468 Human Breast Adenocarcinoma cells, specifically starting from 48 h of culture (about 40 % and 60 % of dead cells at 48 and 72 h, respectively, at all tested concentrations). RGD-NanoStar reduced the cell viability also of tumoral U87 Human Glioblastoma cells, compared to cells only, at 72 h (about 25 % of dead cells) demonstrating a time-dependent effect exerted by the highest concentrations. The effects of DTX-loaded micelles (RGD-NanoStar/DTX) on U87 and MDA-MB 468 cell lines were evaluated by MTT, cell morphology analysis, and scratch test. A compromised cell morphology was observed without significant difference between DTX-treated and RGD-NanoStar/DTX - treated cells, especially in U87 cell line. Although no apparent benefit emerged from the drug incorporation into the nanosystem by MTT assay, the scratch test revealed a statistically significant inhibition of tumoral cell migration on both cell lines, confirming the well-known role of DTX in inhibiting cell movements even when loaded on polymeric micelles. Specifically, only 43 μm distance was covered by U87 cells after 30 h culture with RGD-NanoStar/DTX (30 μg/mL) compared to 73 μm in the presence of free DTX at the same concentration; more interestingly, a total absence of MDA-MB 468 cell movements was detected at 30 h compared to about 50 μm distance covered by cells in the presence of free DTX (10 μg/mL). The stronger inhibitory activity on cell migration of RGD-NanoStar/DTX compared to the free drug in both cell lines at 30 h attested for a good ability of the drug-loaded nanocarrier to reduce tumor propagation and invasiveness, enhancing the typical effect of DTX on metastatization.

Polyurethane based hybrid ciprofloxacin-releasing wound dressings designed for skin engineering purpose

PURPOSE

Even in the 21st century, chronic wounds still pose a major challenge due to potentially inappropriate treatment options, so the latest wound dressings are hybrid systems that enable clinical management, such as a hybrid of hydrogels, antibiotics and polymers. These wound dressings are mainly used for chronic and complex wounds, which can easily be infected by bacteria.

MATERIALS AND METHODS

Six Composite Porous Matrices (CPMs) based on polyurethane (PUR) in alliance with polylactide (PLAs) and poly(vinyl alcohol) (PVA) were prepared and analyzed using optical microscopy. Three different types of hydrogels and their Ciprofloxacin (Cipro) modified variants' ratios were prepared and analyzed using FTIR, SEM and EDX techniques. Six Hybrid Cipro-Releasing Hydrogel Wound Dressings (H-CRWDs) were also prepared and underwent short-term degradation, Cipro release, microbiology and cell viability measurements.

RESULTS

Average porosity of CPMs was in the range of 69-81%. The pore size of the obtained CPMs was optimal for skin regeneration. Short-term degradation studies revealed degradability in physiological conditions regardless of sample type. A meaningful release was also observed even in short time (21.76 ​± ​0.64 ​μg/mL after 15 ​min). Microbiological tests showed visible inhibition zones. Cell viability tests proved that the obtained H-CRWDs were biocompatible (over 85% of cells).

CONCLUSIONS

A promising hybrid wound dressing was labeled. Simple and cost-effective methods were used to obtain microbiologically active and biocompatible dressings. The results were of importance for the design and development of acceptable solutions in the management of chronic wounds of high potential for infection.

Effect of the structural features of biobased linear polyester plasticizers on the crystallization of polylactides

This work presents, for the first time, a detailed report on how the nucleation and crystallization of polylactide (PLLA) are affected by biobased aliphatic polyesters plasticizers. Three biobased polyesters were synthesized via solvent-free two-stage melt polycondensation of adipic acid (AdA) with three different biobased aliphatic diols and used as plasticizers for poly (L-lactic acid) (PLLA). The molecular structure of the synthesized polyesters was proved using ¹H NMR, ¹³C NMR and Fourier transform infrared (FTIR) spectroscopy. PLLA/AdA-based blends containing 10 wt% of the polyester plasticizers were studied by tensile tests, dynamic mechanical analysis (DMA), wide-angle x-ray scattering (WAXS), differential scanning calorimetry (DSC) and polarized light optical microscopy (PLOM). Adding the plasticizers to PLLA decreased T_g by up to 11 °C and significantly increased the elongation at break by about 8 times compared with neat PLLA. The addition of 10 wt% of any AdA-based plasticizer to PLLA increases the nucleation rate from the glassy state by around 50-110 % depending on the plasticizer. The overall crystallization rate from the glassy state was 2-3 times faster for the plasticized PLLAs than neat PLLA. These results are a consequence of the lower energy barrier for both nucleation and growth processes. The incorporation of AdA-based linear polyesters had an incremental impact on the crystal growth rate (or secondary nucleation) of PLLA spherulites from the melt and glassy states. In conclusion, the AdA-based aliphatic polyesters allowed to enhance PLLA crystallization rates and showed interesting potential for the formulation of fully biobased PLLA blends.

Real-time monitoring of the emission of volatile organic compounds from polylactide 3D printing filaments

Establishing the emission profile of volatile organic compounds generated during fused deposition modeling 3D printing using polymer filaments is important in terms of both understanding the processes taking place during thermal degradation of thermoplastics, and assessing the user's exposure to potentially harmful volatiles. However, obtaining detailed, real-time qualitative and quantitative results poses a challenge. In this paper solid-phase microextraction-gas chromatography-time-of-flight mass spectrometry and proton transfer reaction time-of-flight mass spectrometry were used to identify and monitor the emission of volatiles during thermal degradation of polylactide filaments and during 3D printing. Filaments of two different grades and three colours were used. It was possible to obtain detailed, time- and temperature-resolved emission profiles of the main products of thermal decomposition of lactide and polylactide 3D printing filaments at concentration levels of a few μg/g. This revealed different temperature-dependent emission characteristics of particular volatiles, such as, among others, lactide, acetaldehyde, acetic acid, and 2-butanone between various polylactide 3D printing filaments. This approach can be used to monitor the emission associated with printing with various other types of polymer 3D printing materials.

Coaxial electrospray of uniform polylactide core-shell microparticles for long-acting contraceptive

Despite its high efficacy and good patient compliance, the only long-acting injectable (LAI) contraceptive currently available in the US, depot medroxyprogesterone acetate (DMPA), is limited by significant side effects and a delayed return to fertility for up to 10 months after its intended duration of action. To overcome these limitations, we sought to develop an injectable poly(D,l-lactide) (PLA) microparticle for sustained release of contraceptive hormone, etonogestrel (ENG). A one-step technique, coaxial electrospray method was applied to prepare uniform ENG loaded core-shell structured and slow-degrading PLA microparticles (ENG-cs-MPs) to provide release control while minimizing polymer content. By adjusting voltage, polymer concentration and flow rate of the coaxial jetting solution, the prepared ENG-cs-MPs exhibited uniformly small particle size with volume mean diameter of 14.7 ± 0.5 μm and a shell thickness of 2.5 ± 0.1 μm, high drug loading of ~54%, high encapsulation efficiency of ~99%, and initial 1-day burst release of just ~10%. Long-term in vitro release of ENG was continuous for more than 3 months without change of the shell structure in 6 months. In PK studies, ENG-cs-MPs achieved a steady and continuous drug release for approximately 3 months and then quickly tapered off within 3 weeks. Hence, ENG-cs-MPs prepared by the coaxial electrospray method may be useful as a LAI contraceptive with an improved PK profile relative to DMPA.

Potential of Serratia plymuthica IV-11-34 strain for biodegradation of polylactide and poly(ethylene terephthalate)

Serratia plymuthica strain IV-11-34 belongs to the plant growth promoting bacteria (PGPR). In the sequenced genome of S. plymuthica IV-11-34, we have identified the genes involved in biodegradation and metabolisms of xenobiotics. The potential of S. plymuthica IV-11-34 for the degradation of biodegradable aliphatic polyester polylactide (PLA) and resistant to biodegradation - poly(ethylene terephthalate) (PET) was assessed by biochemical oxygen consumption (BOD) and carbon dioxide methods. After seven days of growth, the bacteria strain showed more than 80% and 60% increase in respiratory activity in the presence of PLA and PET, respectively. We assume that during biodegradation, S. plymuthica IV-11-34 colonise the surface of PLA and PET, since the formation of a biofilm on the surface of polymers was shown by the LIVE/DEAD method. We have demonstrated for the relA gene, which is an alarmone synthetase, a 1.2-fold increase in expression in the presence of PLA, and a 4-fold decrease in expression in the presence of PET for the spoT gene, which is a hydrolase of alarmones. Research has shown that the bacterium has the ability to biodegrade PLA and PET, and the first stage of this process involves bacterial stringent response genes responsible for survival under extreme conditions.

Inhibition of edge stenosis of endografts in swine iliac arteries by a novel endograft with biodegradable coating at both ends

Objective

This study evaluated the effectiveness and safety of a novel endograft with a biodegradable coating at both ends in preventing edge stenosis in swine iliac arteries. The biodegradable coating was composed of polylactide and paclitaxel.

Methods

Four types of endograft were implanted in the iliac arteries of healthy swine: an endograft without coating (control group) and endografts with polylactide and paclitaxel coating containing 0.1, 0.3, or 3.6 μg/mm² of paclitaxel. The edge stenosis of these endografts in swine iliac arteries was assessed using angiographic image data at 30, 90, and 180 days after the operation. After terminal angiography, histologic evaluation of the treated arteries was performed. The treated sections of iliac arteries and blood samples were obtained at 1, 7, 30, 90, and 180 days for pharmacokinetic analysis.

Results

The results of angiographic and histologic evaluation demonstrated that intimal hyperplasia contributed to edge stenosis and polylactide-paclitaxel coating effectively inhibited edge stenosis. At 30 days, edge stenosis was observed at both the proximal and distal edges of the endograft without coating. At 90 days, edge stenosis was detected for the endograft coated with 0.1 μg/mm² paclitaxel, and ectasia dilation occurred at the proximal and distal edges of the endograft coated with 3.6 μg/mm² paclitaxel. No edge stenosis or other adverse effects were observed at 90 and 180 days for the endograft coated with 0.3 μg/mm² paclitaxel. In addition, for the endograft coated with 0.3 μg/mm² paclitaxel, a pharmacokinetic analysis showed that the paclitaxel concentration of treated segments decreased from 14 264 ± 1020 ng/g at day 1 to 80 ± 70 ng/g at day 90, and 20 ± 40 ng/g at day 180. The plasma paclitaxel concentration was low at day 1 and no longer detected after 7 days.

Conclusions

Polylactide and paclitaxel coating containing 0.3 μg/mm² paclitaxel at both ends of endografts effectively and safely inhibits edge stenosis in swine iliac arteries.

Incorporating redox-sensitive nanogels into bioabsorbable nanofibrous membrane to acquire ROS-balance capacity for skin regeneration

Facing the high incidence of skin diseases, it is urgent to develop functional materials with high bioactivity for wound healing, where reactive oxygen species (ROS) play an important role in the wound healing process mainly via adjustment of immune response and neovasculation. In this study, we developed a kind of bioabsorbable materials with ROS-mediation capacity for skin disease therapy. Firstly, redox-sensitive poly(N-isopropylacrylamide-acrylic acid) (PNA) nanogels were synthesized by radical emulsion polymerization method using a disulfide molecule as crosslinker. The resulting nanogels were then incorporated into the nanofibrous membrane of poly(l-lactic acid) (PLLA) via airbrushing approach to offer bioabsorbable membrane with redox-sensitive ROS-balance capacity. In vitro biological evaluation indicated that the PNA-contained bioabsorbable membrane improved cell adhesion and proliferation compared to the native PLLA membrane. In vivo study using mouse wound skin model demonstrated that PNA-doped nanofibrous membranes could promote the wound healing process, where the disulfide bonds in them were able to adjust the ROS level in the wound skin for mediation of redox potential to achieve higher wound healing efficacy.

Food packaging wastes amid the COVID-19 pandemic: Trends and challenges

BACKGROUND

The COVID-19 crisis generated changes in consumer behavior related to food purchase and the management of food packaging. Due to the intensification of online purchases for home delivery, there has been an increase in the use of food packaging (mostly non-biodegradable or non-renewable). Moreover, the fear of contamination with SARS-CoV-2 through contact with materials and surfaces has led to an intensified disposal of food packaging, promoting a setback in waste management.

SCOPE AND APPROACH

The purpose of this short commentary is to address the impacts of increased use and disposal of food packaging during the COVID-19 pandemic. Technological solutions have been presented as tools to minimize the environmental impacts of the increased volume of disposed food packaging (namely, the development of biodegradable food packaging) as well as to minimize the occurrence of cross-contamination (namely, the incorporation of active antiviral components).

KEY FINDINGS AND CONCLUSIONS

The consumer behavior in the COVID-19 pandemic requires actions concerning adoption of bioplastics for single-use food packaging. Polylactide (PLA) stands out for high production viability, performance comparable to those of petroleum-based thermoplastics, and carbon neutral life cycle. Moreover, active components including organic compounds (resveratrol, luteolin, myricetin etc.) and metals (e.g., copper, zinc, silver) can mitigate cross-contamination. Therefore, there are opportunities to reduce food packaging-related environmental footprints while also decreasing the occurrence of surface-mediated cross-contamination.

Effect of solvent type on the dispersion quality of spray-and freeze-dried CNCs in PLA through rheological analysis

Polylactide (PLA) nanocomposites with spray-and freeze-dried cellulose nanocrystals (i.e., SCNC and FCNC) were prepared through solution casting using four different solvents: tetrahydrofuran (THF), chloroform (CHL), dimethylformamide (DMF), and dimethyl sulfoxide (DMSO). Small amplitude oscillatory shear rheological analysis was extensively employed to explore the CNC dispersion quality in PLA. Overall, the rheological properties differences of PLA/SCNC and PLA/FCNC nanocomposites were not very significant. Moreover, the use of THF and CHL did not lead to a proper dispersion of CNCs in PLA due to their low dielectric constants. On the other hand, while the use of DMF was effective on the enhancement of CNC dispersion, DMSO could more dramatically lead to such enhancement due to its higher dielectric constant. The percolation threshold in PLA/SCNC nanocomposites prepared with DMF and DMSO was predicted around 1.52 and 0.12 wt% CNC, respectively. The crystallization behavior of PLA/nanocomposites prepared with DMF and DMSO were also explored.

Mithramycin delivery systems to develop effective therapies in sarcomas

BACKGROUND

Sarcomas comprise a group of aggressive malignancies with very little treatment options beyond standard chemotherapy. Reposition of approved drugs represents an attractive approach to identify effective therapeutic compounds. One example is mithramycin (MTM), a natural antibiotic which has demonstrated a strong antitumour activity in several tumour types, including sarcomas. However, its widespread use in the clinic was limited by its poor toxicity profile.

RESULTS

In order to improve the therapeutic index of MTM, we have loaded MTM into newly developed nanocarrier formulations. First, polylactide (PLA) polymeric nanoparticles (NPs) were generated by nanoprecipitation. Also, liposomes (LIP) were prepared by ethanol injection and evaporation solvent method. Finally, MTM-loaded hydrogels (HG) were obtained by passive loading using a urea derivative non-peptidic hydrogelator. MTM-loaded NPs and LIP display optimal hydrodynamic radii between 80 and 105 nm with a very low polydispersity index (PdI) and encapsulation efficiencies (EE) of 92 and 30%, respectively. All formulations show a high stability and different release rates ranging from a fast release in HG (100% after 30 min) to more sustained release from NPs (100% after 24 h) and LIP (40% after 48 h). In vitro assays confirmed that all assayed MTM formulations retain the cytotoxic, anti-invasive and anti-stemness potential of free MTM in models of myxoid liposarcoma, undifferentiated pleomorphic sarcoma and chondrosarcoma. In addition, whole genome transcriptomic analysis evidenced the ability of MTM, both free and encapsulated, to act as a multi-repressor of several tumour-promoting pathways at once. Importantly, the treatment of mice bearing sarcoma xenografts showed that encapsulated MTM exhibited enhanced therapeutic effects and was better tolerated than free MTM.

CONCLUSIONS

Overall, these novel formulations may represent an efficient and safer MTM-delivering alternative for sarcoma treatment.

Biodegradable and renewable UV-shielding polylactide composites containing hierarchical structured POSS functionalized lignin

The demand for biodegradable and renewable UV-shielding materials is ever increasing due to the rising concern for the environment. In this paper, biobased lignin was functionalized by polyhedral oligomeric silsesquioxane (POSS) with an epoxy substituent. Then the POSS decorated lignin (lignin-POSS) was mixed with polylactide (PLA) to act as UV-shielding filler by melt compounding. The SEM observation revealed that the presence of POSS contributed to improving the homogeneous dispersion of lignin-POSS in the PLA matrix with good compatibility when the content of lignin-POSS was lower than 5 wt%. The synergistic effects of lignin and POSS endowed PLA composite films with a good balance of UV-shielding ability and transparency in the visible light region. With the addition of 5 wt% lignin-POSS, the PLA composite film absorbed almost all UV irradiation across the entire UV spectrum. In addition, the presence of lignin-POSS could serve as a nucleating agent to increase the degree of crystallinity of PLA. The dynamical rheological tests revealed that the lignin-POSSS reduced the complex viscosity and storage modulus of PLA composites, improving the flowability of PLA composites. This work presents a viable pathway to prepare biodegradable and renewable UV-shielding materials for potential packaging applications.

Advances in amphiphilic polylactide/vinyl polymer based nano-assemblies for drug delivery

Micelles from self-assembled amphiphilic copolymers are highly attractive in drug delivery, due to their small size and hydrophilic stealth corona allowing prolonged lifetimes in the bloodstream and thus improved drug bioavailability. Polylactide (PLA)-based amphiphilic copolymer micelles are key candidates in this field, owing to the well-established biodegradability and biocompatibility of PLA. While PLA-b-poly(ethylene glycol) (PEG) block copolymer micelles can be seen as the "gold standard" in drug delivery research so far, the progresses in controlled radical polymerizations (Atom Transfer Radical Polymerization, Reversible Addition-Fragmentation Transfer and Nitroxide Mediated Polymerization) have offered new opportunities in the design of advanced amphiphilic copolymers for drug delivery due to their flexibility in many regards: (i) they can be easily combined with ring-opening polymerization (ROP) of lactide, with a diversity in types of architectures (e.g., block, graft, star), (ii) they allow (co)polymerization of a wide range of vinyl monomers, possibly circumventing PEG limitations, (iii) functionalization (with biomolecules or stimuli-cleavable moieties) is versatile due to end-group fidelity and copolymerization ability with reactive/functional comonomers. In this review, we report on the advances in the past decade of such amphiphilic PLA/vinyl polymer based nano-carriers, regarding key properties such as stealth character, cell targeting and stimuli-responsiveness.

Quantitative analyses of products from chemical recycling of polylactide (PLA) by alcoholysis with various alcohols and their applications as healable lactide-based polyurethanes

Chemical recycling is a promising approach for converting post-consumer bio-plastics, especially polyesters, into small-sized starting materials for other value-added products. In this work, a process for alcoholysis of polylactide (PLA) by various alcohols has been developed. The products are then employed as bio-based polyols in the production of highly elastic polyurethanes (PUs) with self-healing properties. Various alcohols with three carbons in the structure but different numbers and nature of hydroxyl groups, i.e., 1,3-propanediol (PDO), propylene glycol (PG), and glycerol (Gly), were employed in the alcoholysis reaction with tetrabutyl orthotitanate (TBT) as a catalyst, using a microwave reactor. Standard quantitative and qualitative analysis techniques have been developed for the characterization of the alcoholyzed PLA products, in terms of compositions, reaction yields, and structural fractions, by employing ATR-FTIR, 2D-NMR, ¹H NMR, and GC-MS spectroscopy. A mixture of hydroxyl-capped lactate sequences with different lengths was achieved as alcoholyzed PLA products, which are classified as mono-lactates, dilactates, and poly-lactates. The smallest mono-lactate is a major product for all systems, indicating that the developed process, which employs a microwave reactor, has high efficiency in the cleaving of ester bonds in long PLA chains (also at short reaction times). The yield of the mono-lactates decreases when the PLA/alcohol feed ratios were changed from 1:1 to 4:1 wt/wt, while those of the dilactates and poly-lactates increase. At similar PLA/alcohol feed ratios, the reactivity of different hydroxyls in the cleaving of the ester bonds of PLA is compared by examining the compositions of the alcoholyzed products generated when different numbers and nature of hydroxyls participate in the reaction (nucleophilicity and functionality). This provides insights into the reaction mechanisms, which are essential in determining the reaction conditions for effectively designing a process to obtain products with specific structures and properties for further use in specific applications. Additionally, lactide can be directly obtained from the alcoholysis reaction, whose content is strongly dependent on the PLA/alcohol feed ratios. The products obtained from the PG reaction was selected as a potential candidate for use as the polyol starting material for preparing highly-elastic PUs. The resulting PU products show a low modulus comparable to rubber materials, with high elongation at break, which is suitable for use as toughness-enhancement agents for other polyesters, or as functional biomaterials. The materials exhibit excellent healing property, and further enhancements in the tensile strength and modulus after heat treatments.

Structure-property relationships in 3D-printed poly(l-lactide-co-ε-caprolactone) degradable polymer

The recent growth of polymer 3D-printing has brought innovation to the medical implant field. Implants with complex porous structures can be fabricated by printing to tune mechanical behavior and enable diffusion, consequently improving integration with tissues in the human body. Poly(L-lactide-co-ε-caprolactone) (PLCL) is a 3D-printable polymer that possess a wide range of possible mechanical properties depending on its monomer composition. It is often used in biomedical applications requiring degradability. In this study, we explore 1) the effect of annealing 3D-printed PLCL and 2) the degradation profile of both annealed and unannealed 3D-printed PLCL scaffolds. The degraded samples were characterized for its molecular weight, mass loss, microstructure, and mechanical properties. By annealing the 3D-printed PLCL, we reveal the structure-property relationship of PLCL. Crystallization was found to be a crucial factor in the resulting mechanical properties, increasing stiffness significantly. The subsequent degradation study revealed that there was no significant difference brought about by pre-annealing the scaffolds. The scaffolds were found to maintain their mechanical properties until up to 8 weeks, at which point the scaffolds reached a critical molecular weight and lost their mechanical integrity.

Investigation of cellular morphology and proliferation on patterned electrospun PLA-gelatin mats

The morphology and proliferation of eukaryotic cells depend on their microenvironment. When electrospun mats are used as tissue engineering scaffolds, the local alignment of the fibers has a pronounced influence on cells. Here we analyzed the morphology of the patterned mats produced by electrospinning of PLA-gelatin blend onto a conductive grid. We investigated the cellular morphology and proliferation of two cell lines (keratinocytes HaCaT and fibroblasts NIH 3T3) on the patterned mats. The non-patterned mats of the same chemical composition were used as control ones. The HaCaT cells predominantly grew on convex areas of the patterned mats along with increasing their nucleus area and decreasing cell area. The 3T3 cells had a lower proliferative rate when grown on the patterned mats. The results can be valuable for further development of the procedures, which allow the patterned electrospun mats development as well as for the investigation of cell-substrate interactions.

Catalytic pyrolysis of petroleum-based and biodegradable plastic waste to obtain high-value chemicals

The petroleum-based plastics, high-density polyethylene (HDPE), low-density polyethylene (LDPE), and polypropylene (PP), and the biodegradable plastic, polylactide (PLA) were processed by thermal and catalytic pyrolysis to investigate their suitability as feedstock for chemical recycling. The influence of pyrolysis temperature (400-600 °C) and catalyst (zeolite, spent FCC, and MgO catalyst) on the pyrolysis liquid composition and yield was studied. The studied petroleum-based plastics had similar decomposition temperature ranges but produced their highest pyrolysis yields at different temperatures. Pyrolysis liquids from thermal degradation of HDPE and LDPE consisted high yield of waxes but those of PP and PLA consisted of both waxes and liquid oil. Catalysts affected not only the pyrolysis yield, but also the proportions of liquid oil and wax in pyrolysis liquids. Alkenes, alkanes, and aromatics were the main compounds in the pyrolysis liquids. Spent FCC catalyst reduced the production of waxes and increased the production of gasoline-range hydrocarbons and aromatics. MgO catalyst led to high coke formation from polyolefins and PLA. Lactic acid, lactide and propanoic acid were examples of valuable chemicals recovered from the pyrolysis of PLA. Lactide was the main product (up to 79%) of catalytic pyrolysis with zeolite at 400 °C. Spent FCC catalyst produced mostly propanoic acid at 400 °C but at 600 °C, L-lactic acid became the most abundant compound.

Structure and properties of in situ reactive blend of polylactide and thermoplastic starch

In this study, in situ reactive extrusion of polylactide and thermoplastic starch modified with chloropropyl trimethoxysilane coupling agent (PLA/mTPS) is proposed. The success of covalent bond formation between PLA matrix and mTPS phase is clarified by two-dimensional nuclear magnetic resonance (2D-NMR) spectroscopy with ¹H¹H TOCSY mode. This chemically bound PLA with starch gives the remarkable compatibility in the PLA/mTPS film, with not only a decreased glass transition temperature (47 °C) but also an increased crystallinity of PLA (Χ_c of 50%). It consequently increases oxygen barrier significantly and also enhances the film flexibility as observed from the drastic increase of elongation at break (from 3% to 50%). Moreover, the PLA/mTPS 60/40 (w/w) film exhibits the accelerated degradation as compared with pure PLA film.

Fully biodegradable polylactide foams with ultrahigh expansion ratio and heat resistance for green packaging

Long chain branching (LCB) structures are efficiently introduced into polylactide (PLA) by employing sustainable soybean oil (SO) under the initiation of trace amount of cyclic peroxide, which displays robust foamability and heat resistance. It is discovered that with the introduction of 0.6 wt% SO, the expansion ratio and Vicat softening temperature of LCB PLA are sharply raised to 75.2-fold and 155.8 °C, respectively, which is about 17.9 and 2.6 times those of linear PLA. This is because that the amounts of LCB structures are significantly increased in LCB PLA by the addition of SO with low reactivity of internal CC bonds, which can avoid the oligomerization reaction, resulting in more dramatically improved melting strength and crystallization performance of LCB PLA. Moreover, the hydrolytic degradation of LCB PLA is largely expedited as compared to linear PLA, owing to the more rapid water permeation caused by the loose packing of LCB structures. Finally, the PLA foam tray with light weight and good heat resistance is successfully developed by using LCB PLA with 0.6 wt% SO through extrusion foaming with supercritical carbon oxide and thermoforming techniques. Hence, this research offers a green route to produce eco-friendly light-weight and high-heat-resistance LCB-PLA foam with full biodegradability, which is an ideal alternative to the non-degradable oil-based plastics in the field of disposable packaging products.

Post-chemical grafting poly(methyl methacrylate) to commercially renewable elastomer as effective modifiers for polylactide blends

A novel poly(epichlorohydrin-co-ethylene oxide)-g-poly(methyl methacrylate) copolymer (ECO-g-PMMA) was successfully synthesized from a commercially renewable elastomer via the ATRP method. The graft copolymer was investigated as a toughening agent and compatibilizer for polylactide (PLA) and PLA/ECO blends, respectively. Binary blending PLA with the copolymers (5-15 wt%) significantly improved the strain at break of PLA above 200% without a great strength loss. More importantly, the ternary PLA/ECO/ECO-g-PMMA copolymer blends exhibited a remarkably high impact strength of 96.9 kJ/m² with non-broken behaviors. An interesting phase structure transformation from a typical sea-island structure to a unique quasi-continuous network structure was observed with varying the content of ECO-g-PMMA from 0 to 15 wt% in the ternary blends. The native toughening mechanism analysis indicated the synergistic toughening effect of the good interfacial adhesion and unique quasi-continuous morphology endowed the ternary blends with excellent mechanical performance.

Polylactide/Polyvinylalcohol-Based Porous Bioscaffold Loaded with Gentamicin for Wound Dressing Applications

This study explores the feasibility of modifying the surface liquid spraying method to prepare porous bioscaffolds intended for wound dressing applications. For this purpose, gentamicin sulfate was loaded into polylactide-polyvinyl alcohol bioscaffolds as a highly soluble (hygroscopic) model drug for in vitro release study. Moreover, the influence of inorganic salts including NaCl (10 g/L) and KMnO4 (0.4 mg/L), and post-thermal treatment (T) (80 °C for 2 min) on the properties of the bioscaffolds were studied. The bioscaffolds were characterized by scanning electron microscopy, Fourier Transform infrared spectroscopy, and differential scanning calorimetry. In addition, other properties including porosity, swelling degree, water vapor transmission rate, entrapment efficiency, and the release of gentamicin sulfate were investigated. Results showed that high concentrations of NaCl (10 g/L) in the aqueous phase led to an increase of around 68% in the initial burst release due to the increase in porosity. In fact, porosity increased from 68.1 ± 1.2 to 94.1 ± 1.5. Moreover, the thermal treatment of the Polylactide-polyvinyl alcohol/NaCl (PLA-PVA/NaCl) bioscaffolds above glass transition temperature (Tg) reduced the initial burst release by approximately 11% and prolonged the release of the drug. These results suggest that thermal treatment of polymer above Tg can be an efficient approach for a sustained release.

Damage in extrusion additive manufactured biomedical polymer: Effects of testing direction and environment during cyclic loading

Although biodegradable polymers were widely researched, this is the first study considering the effect of combined testing environments and cyclic loading on the most important aspect related to additive manufacturing: the interfacial bond between deposited layers. Its results give confidence in applicability of the material extrusion additive manufacturing technology for biomedical fields, by demonstrating that the interface behaves in a manner similar to that of the bulk-polymer material. To do this, especially designed tensile specimens were used to analyse the degradation of 3D-printed polymers subjected to constant-amplitude and incremental cyclic loads when tested in air at room temperature (control) and submerged at 37 °C (close to in-vivo conditions). The mechanical properties of the interface between extruded filaments were compared against the bulk material, i.e. along filaments. In both cases, cyclic loading caused only a negligible detrimental effect compared to non-cyclic loading (less than 10 % difference in ultimate tensile strength), demonstrating the suitability of using 3D-printed components in biomedical applications, usually exposed to cyclic loading. For cyclic tests with a constant loading amplitude, larger residual deformation (>100 % greater) and energy dissipation (>15 % greater) were found when testing submerged in solution at 37 °C as opposed to in laboratory conditions (air at room temperature), as used by many studies. This difference may be due to plasticisation effects of water and temperature. For cyclic tests with incrementally increasing loading amplitudes, the vast majority of energy dissipation happened in the last two cycles prior to failure, when the polymer approached the yield point. The results demonstrate the importance of using an appropriate methodology for biomedical applications; otherwise, mechanical properties may be overestimated.