26
|
Yokooji T, Kurihara S, Murakami T, Chinuki Y, Takahashi H, Morita E, Harada S, Ishii K, Hiragun M, Hide M, Matsuo H. Characterization of causative allergens for wheat-dependent exercise-induced anaphylaxis sensitized with hydrolyzed wheat proteins in facial soap. Allergol Int 2013; 62:435-45. [PMID: 23963475 DOI: 10.2332/allergolint.13-oa-0561] [Citation(s) in RCA: 63] [Impact Index Per Article: 5.7] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 03/21/2013] [Accepted: 04/18/2013] [Indexed: 11/20/2022] Open
Abstract
BACKGROUND In Japan, hydrolyzed wheat proteins (HWP) have been reported to cause wheat-dependent exercise-induced anaphylaxis (WDEIA) by transcutaneous sensitization using HWP-containing soap. Patients develop allergic reactions not only with soap use, but also with exercise after the intake of wheat protein (WP). ω5-Gliadin and HMW-glutenin were identified as major allergens in conventional WP-WDEIA patients. However, the allergens in HWP-WDEIA have yet to be elucidated. METHODS Sera were obtained from 22 patients with HWP-sensitized WDEIA. The allergenic activities of HWP and six recombinant wheat gluten proteins, including α/β-, γ-, ω1,2- and ω5-gliadin and low- and high molecular weight (HMW)-glutenins, were characterized by immunoblot analysis and histamine releasing test. IgE-binding epitopes were identified using arrays of overlapping peptides synthesized on SPOTs membrane. RESULTS Immunoblot analysis showed that IgE antibodies (Abs) from HWP-WDEIA bound to α/β-, γ- and ω1,2-gliadin. Recombinant γ-gliadin induced significant histamine release from basophils in eight of 11 patients with HWP-WDEIA. An IgE-binding epitope "QPQQPFPQ" was identified within the primary sequence of γ-gliadin, and the deamidated peptide containing the "PEEPFP" sequence bound with IgE Abs more strongly compared to the native epitope-peptide. The epitope-peptide inhibited IgE-binding to HWP, indicating that the specific IgE to HWP cross-reacts with γ-gliadin. CONCLUSIONS HWP-WDEIA patients could be sensitized to HWP containing a PEEPFP sequence, and WDEIA symptoms after WP ingestion could partly be induced by γ-gliadin. These findings could be useful to help develop tools for diagnosis and desensitization therapy for HWP-WDEIA.
Collapse
|
27
|
Xu W, Song A, Dong S, Chen J, Hao J. A systematic investigation and insight into the formation mechanism of bilayers of fatty acid/soap mixtures in aqueous solutions. LANGMUIR : THE ACS JOURNAL OF SURFACES AND COLLOIDS 2013; 29:12380-12388. [PMID: 24028317 DOI: 10.1021/la403008d] [Citation(s) in RCA: 30] [Impact Index Per Article: 2.7] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/02/2023]
Abstract
Vesicles are the most common form of bilayer structures in fatty acid/soap mixtures in aqueous solutions; however, a peculiar bilayer structure called a "planar sheet" was found for the first time in the mixtures. In the past few decades, considerable research has focused on the formation theory of bilayers in fatty acid/soap mixtures. The hydrogen bond theory has been widely accepted by scientists to explain the formation of bilayers. However, except for the hydrogen bond, no other driving forces were proposed systematically. In this work, three kinds of weak interactions were investigated in detail, which could perfectly demonstrate the formation mechanism of bilayer structures in the fatty acid/soap mixtures in aqueous solutions. (i) The influence of hydrophobic interaction was detected by changing the chain length of fatty acid (C(n)H(2n+1)COOH), in which n = 10 to 18, the phase behavior was investigated, and the phase region was presented. With the help of cryogenic transmission electron microscopy (cryo-TEM) observations, deuterium nuclear magnetic resonance ((2)H NMR), and X-ray diffraction (XRD) measurements, the vesicles and planar sheets were determined. The chain length of C(n)H(2n+1)COOH has an important effect on the physical state of the hydrophobic chain, resulting in an obvious difference in the viscoelasticity of the solution samples. (ii) The existence of hydrogen bonds between fatty acids and their soaps in aqueous solutions was demonstrated by Fourier transform infrared (FT-IR) spectroscopy and molecule dynamical simulation. From the pH measurements, the pH ranges of the bilayer formation were at the pKa values of fatty acids, respectively. (iii) Counterions can be embedded in the stern layer of the bilayers and screen the electrostatic repulsion between the COO(-) anionic headgroups. FT-IR characterization demonstrated a bidentate bridging coordination mode between counterions and carboxylates. The conductivity measurements provided the degree of counterion binding (β = 0.854), indicating the importance of the counterions.
Collapse
|
28
|
Luo X, Hu S, Zhang X, Li Y. Thermochemical conversion of crude glycerol to biopolyols for the production of polyurethane foams. BIORESOURCE TECHNOLOGY 2013; 139:323-329. [PMID: 23665694 DOI: 10.1016/j.biortech.2013.04.011] [Citation(s) in RCA: 32] [Impact Index Per Article: 2.9] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 01/25/2013] [Revised: 04/02/2013] [Accepted: 04/03/2013] [Indexed: 06/02/2023]
Abstract
This study aimed to produce biopolyols from crude glycerol via a novel thermochemical conversion process. The effect of operational parameters, including sulfuric acid loading and reaction temperature and time, on the properties of the produced biopolyols was investigated. Biopolyols produced under preferred reaction conditions of 200°C, 90 min, and 3% sulfuric acid loading showed a hydroxyl number of around 481 mg KOH/g, an acid number of around 5mg KOH/g, and a viscosity of around 25.0 Pas. The resulting polyurethane (PU) foams showed a compressive strength of around 184.5 kPa and a density of around 43.0 kg/m(3), comparable to those of some petroleum-based analogs. Characterization of the biopolyols via pyrolysis-gas chromatography-mass spectrometry (Py-GC-MS), gas chromatography (GC), and thermogravimetrical analysis (TGA) showed that the major reactions of this process were the formation of monoglycerides and diglycerides through the esterification and transesterification of different components in crude glycerol.
Collapse
|
29
|
Rengstl D, Diat O, Klein R, Kunz W. Influence of chain length and double bond on the aqueous behavior of choline carboxylate soaps. LANGMUIR : THE ACS JOURNAL OF SURFACES AND COLLOIDS 2013; 29:2506-2519. [PMID: 23368901 DOI: 10.1021/la304431c] [Citation(s) in RCA: 13] [Impact Index Per Article: 1.2] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/01/2023]
Abstract
In preceding studies, we demonstrated that choline carboxylates ChC(m) with alkyl chain lengths of m = 12 - 18 are highly water-soluble (for m = 12, soluble up to 93 wt % soap and 0 °C). In addition, choline soaps are featured by an extraordinary lyotropic phase behavior. With decreasing water concentration, the following phases were found: micellar phase (L(1)), discontinuous cubic phase (I(1)' and I(1)"), hexagonal phase (H(1)), bicontinuous cubic phase (V(1)), and lamellar phase (L(α)). The present work is also focused on the lyotropic phase behavior of choline soaps but with shorter alkyl chains or different alkyl chain properties. We have investigated the aqueous phase behavior of choline soaps with C(8) and C(10) chain-lengths (choline octanoate and choline decanoate) and with a C(18) chain-length with a cis-double bond (choline oleate). We found that choline decanoate follows the lyotropic phase behavior of the longer-chain homologues mentioned above. Choline octanoate in water shows no discontinuous cubic phases, but an extended, isotropic micellar solution phase. In addition, choline octanoate is at the limit between a surfactant and a hydrotrope. The double bond in choline oleate leads also to a better solubility in water and a decrease of the solubilization temperature. It also influences the Gaussian curvature of the aggregates which results in a loss of discontinuous cubic phases in the binary phase diagram. The different lyotropic mesophases were identified by the penetration scan technique with polarizing light microscope and visual observations. To clarify the structural behavior small (SAXS) and wide (WAXS) angle X-ray scattering were performed. To further characterize the extended, isotropic micellar solution phase in the binary phase diagram of choline octanoate viscosity and conductivity measurements were also carried out.
Collapse
|
30
|
Tyski S, Bocian E, Zawistowska A, Mrówka A, Kruszewska H, Grzybowska W, Zareba T. [Microbiological characteristics of selected liquid soaps for hands washing]. MEDYCYNA DOSWIADCZALNA I MIKROBIOLOGIA 2013; 65:207-226. [PMID: 24432560] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [MESH Headings] [Subscribe] [Scholar Register] [Indexed: 06/03/2023]
Abstract
INTRODUCTION According to common belief, supported by the authority of the World Health Organization - WHO, the common (social) hand washing is the simplest, cheapest and the most effective way of reduction the hospital-acquired infections. For this purpose products of"liquid soaps", present in a large number on the market, are most often applied. Microbiological status (microbiological purity and antimicrobial activity) of"liquid soaps" available on the Polish market is not known, because relevant routinely studies have not been performed. Only the antibacterial and / or antifungal activity of certain formulations is sometimes assessed, especially when the manufacturer suggests the standardized application of the products for surgical or hygienic procedures. The aim of this study was to determine the microbiological quality, especially microbiological purity and antimicrobial activity of the selected hands washing products, presents on the Polish market. METHODS The 12 selected commercial products, available on the market in Poland, dedicated for hands washing were included into study. Microbiological purity test was carried out in accordance with the Polish Pharmacopoeia (FP) monograph (FP monograph numbers correspond to numbers of the European Pharmacopoeia monograph- Ph. Eur.) No 2.6.12 "Microbiological examination of non-sterile products: microbial enumaration tests", and the monograph of FP No. 2.6.13 "Microbiological examination of non-sterile products: test for specified microorganisms". The following physico-chemical properties of soaps were examined: the pH of the formulations was measured according to the monograph FP No. 2.2.3. "Potentiometric determination of pH", the density of products was assayed according to the monograph FPNo. 2.2.5. "Relative density" and determination the water activity was performed by monograph FP No 2.9.39 "Water-solid interactions: determination of sorption-desorption isotherms and of water activity". Next, antibacterial and antifungal protection was determined in accordance with the monograph FP No 5.1.3. "Efficacy of antimicrobial preservation". The study of antimicrobial activity was carried out in accordance with PN-EN 1040 "Chemical disinfectants and antiseptics - Quantitative suspension test for the evaluation of basic bactericidal activity of chemical disinfectants and antiseptics - Test method and requirements (phase 1)". Finally, using the "time-kill" method the survival of microorganisms after different contact times of the products with bacteria and fungi were determined. RESULTS All the examined products showed a very high microbiological purity. None of the formulations was characterized by a high acidity or alkalinity. All the analyzed products were slightly thicker than water, but such density of the preparation does not seem to be important parameter in the growth of microorganisms. The results of water activity estimation - the parameter indicating the presence of free, not chemically bound water stimulating microbes growth - do not show that low water content in the preparation may inhibit bacteria and fungi growth. Taking into consideration the antimicrobial protection of the products demonstrated in the tests carried out in accordance within FP monograph No 5.1.3. and PN-EN 1040, and analysing curves indicating killing rate of bacteria and fungi obtained by "time-kill" method, the microorganisms contaminating the products generally should not multiply in their environment, and gradually they die - what can take many hours or even days. CONCLUSIONS The cases of bacterial infections connected with the usage of non-medical liguid soaps, applied in the health care units and described in the literature, should be considered as related rather to contamination of plastic packaging and dosage system, then to contamination of preparation itself inside the package. It was proved, that in all tested products amount of contaminating microbes diminishes in time. The dynamics of this process depends on the microorganisms character - bacteria dies quicker then fungi. The special attention should be given to washing, cleaning and disinfection of preparation dispensing systems, to avoid microbial contamination of product doses applied directly on the hands. It should be emphasized that only formulations containing antimicrobial agents in an appropriate amount, eliminate microorganisms from the skin surface fast and effectively. In case of hygienic and surgical procedures following the standardized manner in order to obtain required reduction rate of microorganisms in a short time - only products complying with appropriate EN standards are suitable. For these puroposes, the popular "liquid soaps" should not be used.
Collapse
|
31
|
Chinuki Y, Morita E. Wheat-dependent exercise-induced anaphylaxis sensitized with hydrolyzed wheat protein in soap. Allergol Int 2012; 61:529-37. [PMID: 23093796 DOI: 10.2332/allergolint.12-rai-0494] [Citation(s) in RCA: 67] [Impact Index Per Article: 5.6] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 08/19/2012] [Indexed: 11/20/2022] Open
Abstract
Wheat-dependent exercise-induced anaphylaxis (WDEIA) is a specific form of wheat allergy typically induced by exercise after ingestion of wheat products. Wheat ω-5 gliadin is a major allergen associated with conventional WDEIA, and detection of serum immunoglobulin E (IgE) specific to recombinant ω-5 gliadin is a reliable method for its diagnosis. Recently, an increased incidence of a new subtype of WDEIA, which is likely to be sensitized via a percutaneous and/or rhinoconjunctival route to hydrolyzed wheat protein (HWP), has been observed. All of the patients with this new subtype had used the same brand of soap, which contained HWP. Approximately half of these patients developed contact allergy several months later and subsequently developed WDEIA. In each of these patients, contact allergy with soap exposure preceded food ingestion-induced reactions. Other patients directly developed generalized symptoms upon ingestion of wheat products. The predominant observed symptom of the new WDEIA subtype was angioedema of the eyelids; a number of patients developed anaphylaxis. This new subtype of WDEIA has little serum ω-5 gliadin-specific serum IgE.
Collapse
|
32
|
Kirstetter G, Raufaste C, Celestini F. Jet impact on a soap film. PHYSICAL REVIEW. E, STATISTICAL, NONLINEAR, AND SOFT MATTER PHYSICS 2012; 86:036303. [PMID: 23031009 DOI: 10.1103/physreve.86.036303] [Citation(s) in RCA: 3] [Impact Index Per Article: 0.3] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 07/26/2011] [Revised: 03/13/2012] [Indexed: 06/01/2023]
Abstract
We experimentally investigate the impact of a liquid jet on a soap film. We observe that the jet never breaks the film and that two qualitatively different steady regimes may occur. The first one is a refractionlike behavior obtained at small incidence angles when the jet crosses the film and is deflected by the film-jet interaction. For larger incidence angles, the jet is absorbed by the film, giving rise to a new class of flows in which the jet undulates along the film with a characteristic wavelength. Besides its fundamental interest, this paper presents a different way to guide a micrometric flow of liquid in the inertial regime and to probe foam stability submitted to violent perturbations at the soap film scale.
Collapse
|
33
|
Kołodziejczyk MK, Zgoda MM. [The influence of macromolecular excipients on the process of mass transfer at the boundary phase from a model anti-dandruff preparation into the external compartment under in vitro conditions]. Polim Med 2012; 42:79-88. [PMID: 22783736] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [MESH Headings] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 06/01/2023] Open
Abstract
AIM OF THE STUDY The aim of the research was the application assessment of a model preparation--anti-dandruff emulsion. The experiments was conducted under in vitro conditions using of a model system of human skin, which are cellulose dialysis membranes with a standardized pore size. The behaviour of the preparation on the dialysis membrane was analyzed, and the degree of film formation performing the function of a protective barrier was evaluated after gentle rinsing with tepid water without cleaning agents. It was checked whether the product layer remaining on the membrane product layer does not block diffusion and penetration processes. Additionally, an attempt to assess the character of the layer with the use of a hydrophilic marker was made. MATERIALS AND METHODS Model anti-dandruff emulsion, Servapor Dialysis Tubing 100 dialysis membranes with a wall thickness d = 0.1 mm and a declared pore diameter phi = 25 A degrees, sodium chloride, purified water--assessment of the residue level of the analyzed preparation on the dialysis membrane. Examination on the marker diffusion through the dialysis membrane covered with the model anti-dandruff preparation, Approximation of the obtained results. RESULTS The first phase of the experiment was the preparation of dialysis membranes for the adsorption process of a model anti-dandruff preparation, then its adsorption, rinsing with tepid water and the measurement of residue level of the product on the membrane control. It has been observed that the mass of the membrane on which the preparation was applied increased in relation to the membrane from a control sample. The mass increase of the membrane in a research sample is accompanied with the increase of its thickness caused by the adsorbed amount of the product and water on the membrane. The diffusion through the membrane in a control sample turned out to be slightly slower what may indicate the character of the membrane residue of the model anti-dandruff preparation. CONCLUSIONS; The technology of model anti-dandruff emulsion enables the formation of a layer forming a specific protective barrier on the surface of the dialysis membrane. The presence of the layer of model anti-dandruff emulsion on the membrane is confirmed by mean values of mass and thickness increase of the dialysis membrane. The hydrophobic diffusion layer is of a variable character. The properly applied emulsion under "in vivo" conditions might fill voids of the corneal layer of epidermis creating a structure of a film character performing the function of a protective barrier. On the basis of the in vitro assessment, the therapeutic effectiveness under in vivo conditions may be concluded.
Collapse
|
34
|
D'Erme AM, Francalanci S, Milanesi N, Ricci L, Gola M. Contact dermatitis due to dipentene and pine oil in an automobile mechanic. Occup Environ Med 2011; 69:452. [PMID: 22146991 DOI: 10.1136/oemed-2011-100446] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/03/2022]
|
35
|
Romero-Franco M, Hernández-Ramírez RU, Calafat AM, Cebrián ME, Needham LL, Teitelbaum S, Wolff MS, López-Carrillo L. Personal care product use and urinary levels of phthalate metabolites in Mexican women. ENVIRONMENT INTERNATIONAL 2011; 37:867-71. [PMID: 21429583 DOI: 10.1016/j.envint.2011.02.014] [Citation(s) in RCA: 126] [Impact Index Per Article: 9.7] [Reference Citation Analysis] [Abstract] [MESH Headings] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Received: 08/26/2010] [Revised: 01/24/2011] [Accepted: 02/20/2011] [Indexed: 05/02/2023]
Abstract
Sources of phthalates other than Polyvinyl chloride (PVC) related products are scarcely documented in Mexico. The objective of our study was to explore the association between urinary levels of nine phthalate metabolites and the use of personal care products. Subjects included 108 women who participated as controls in an ongoing population-based case-control study of environmental factors and genetic susceptibility to breast cancer in northern Mexico. Direct interviews were performed to inquire about sociodemographic characteristics, reproductive history, use of personal care products, and diet. Phthalate metabolites measured in urine by high performance liquid chromatography-isotope dilution tandem mass spectrometry were monoethyl phthalate (MEP), monobenzyl phthalate (MBzP), mono-n-butyl phthalate (MBP), mono-isobutyl phthalate (MiBP), mono-3-carboxypropyl phthalate (MCPP) as well as mono-2-ethylhexyl phthalate (MEHP), mono-2-ethyl-5-oxohexyl phthalate (MEOHP), mono-2-ethyl-5-hydroxyhexyl phthalate (MEHHP), mono-2-ethyl-5-carboxypentyl phthalate (MECPP) that are metabolites of di-ethylhexyl phthalate (DEHP). Detectable urinary concentrations of phthalate metabolites varied from 75% (MEHP) to 100% (MEP, MBP, MEOHP, MEHHP and MECPP). Medians of urinary concentrations of some phthalate metabolites were significantly higher among users of the following personal care products compared to nonusers: body lotion (MEHHP, MECPP and sum of DEHP metabolites (ΣDEHP)), deodorant (MEHP and ΣDEHP), perfume (MiBP), anti-aging facial cream (MEP, MBP and MCPP) and bottled water (MCPP, MEHHP and MEOHP). Urinary concentrations of MEP showed a positive relationship with the number of personal care products used. Our results suggest that the use of some personal care products contributes to phthalate body burden that deserves attention due to its potential health impact.
Collapse
|
36
|
Mendow G, Veizaga NS, Querini CA. Ethyl ester production by homogeneous alkaline transesterification: influence of the catalyst. BIORESOURCE TECHNOLOGY 2011; 102:6385-6391. [PMID: 21339065 DOI: 10.1016/j.biortech.2011.01.072] [Citation(s) in RCA: 5] [Impact Index Per Article: 0.4] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 11/25/2010] [Revised: 01/19/2011] [Accepted: 01/20/2011] [Indexed: 05/30/2023]
Abstract
In this work, the process for ethyl ester production is studied using refined sunflower oil, and NaOH, KOH, CH(3)ONa, and CH(3)OK, as catalysts. In all cases, the reaction is carried out in a single reaction step. The best conversion is obtained when the catalyst is either sodium methoxide or potassium methoxide. We found that during the transesterification with ethanol, soap formation is more important than in the case of methanol. The saponification reaction consumes an important fraction of the catalyst. The amount of catalyst consumed by this reaction is 100% in the case of using hydroxides as catalyst (KOH or NaOH), and 25%, and 28% when using CH(3)ONa and CH(3)OK as catalysts, respectively. Ethanol increases the catalyst solubility in the oil-ethyl ester phase, thus accelerating the saponification reaction. It is possible to obtain high conversions in a one-step reaction, with a total glycerine concentration close to 0.25%.
Collapse
|
37
|
Abstract
Abstract
The surface tensions of 1,16-hexadecane disodium sulphate in 0.001, 0.2 and 1.0M l.−1 sodium chloride solutions have been determined by the Wilhelmy plate method. Considerable ageing effects were noted. The minimum molecular areas calculated were 95, 88 and 86 sq. Å respectively in the three salt solutions. The lowering of the surface tension was not as great as that caused by sodium dodecyl sulphate, and the hydrocarbon chain linking the two head groups in 1,16-hexadecane disodium sulphate appeared to prevent very close packing in the surface layer.
Collapse
|
38
|
Hernández-Leal L, Temmink H, Zeeman G, Buisman CJN. Removal of micropollutants from aerobically treated grey water via ozone and activated carbon. WATER RESEARCH 2011; 45:2887-96. [PMID: 21453950 DOI: 10.1016/j.watres.2011.03.009] [Citation(s) in RCA: 109] [Impact Index Per Article: 8.4] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 11/09/2010] [Revised: 02/28/2011] [Accepted: 03/06/2011] [Indexed: 05/22/2023]
Abstract
Ozonation and adsorption onto activated carbon were tested for the removal micropollutants of personal care products from aerobically treated grey water. MilliQ water spiked with micropollutants (100-1600 μgL(-1)) was ozonated at a dosing rate of 1.22. In 45 min, this effectively removed (>99%): Four parabens, bisphenol-A, hexylcinnamic aldehyde, 4-methylbenzylidene-camphor (4MBC), benzophenone-3 (BP3), triclosan, galaxolide and ethylhexyl methoxycinnamate. After 60 min, the removal efficiency of benzalkonium chloride was 98%, tonalide and nonylphenol 95%, octocrylene 92% and 2-phenyl-5-benzimidazolesulfonic acid (PBSA) 84%. Ozonation of aerobically treated grey water at an applied ozone dose of 15 mgL(-1), reduced the concentrations of octocrylene, nonylphenol, triclosan, galaxolide, tonalide and 4-methylbenzylidene-camphor to below limits of quantification, with removal efficiencies of at least 79%. Complete adsorption of all studied micropollutants onto powdered activated carbon (PAC) was observed in batch tests with milliQ water spiked with 100-1600 μgL(-1) at a PAC dose of 1.25 gL(-1) and a contact time of 5 min. Three granular activated carbon (GAC) column experiments were operated to treat aerobically treated grey water. The operation of a GAC column with aerobically treated grey water spiked with micropollutants in the range of 0.1-10 μgL(-1) at a flow of 0.5 bed volumes (BV)h(-1) showed micropollutant removal efficiencies higher than 72%. During the operation time of 1728 BV, no breakthrough of TOC or micropollutants was observed. Removal of micropollutants from aerobically treated grey water was tested in a GAC column at a flow of 2 BVh(-1). Bisphenol-A, triclosan, tonalide, BP3, galaxolide, nonylphenol and PBSA were effectively removed even after a stable TOC breakthrough of 65% had been reached. After spiking the aerobically treated effluent with micropollutants to concentrations of 10-100 μgL(-1), efficient removal to below limits of quantification continued for at least 1440 BV. Both ozonation and adsorption are suitable techniques for the removal of micropollutants from aerobically treated grey water.
Collapse
|
39
|
Cantarero S, Zafra-Gómez A, Ballesteros O, Navalón A, Reis MS, Saraiva PM, Vílchez JL. Environmental monitoring study of linear alkylbenzene sulfonates and insoluble soap in Spanish sewage sludge samples. JOURNAL OF ENVIRONMENTAL SCIENCE AND HEALTH. PART A, TOXIC/HAZARDOUS SUBSTANCES & ENVIRONMENTAL ENGINEERING 2011; 46:617-626. [PMID: 21526451 DOI: 10.1080/10934529.2011.562857] [Citation(s) in RCA: 1] [Impact Index Per Article: 0.1] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 05/30/2023]
Abstract
In this work we present a monitoring study of linear alkylbenzene sulfonates (LAS) and insoluble soap performed on Spanish sewage sludge samples. This work focuses on finding statistical relations between LAS concentrations and insoluble soap in sewage sludge samples and variables related to wastewater treatment plants such as water hardness, population and treatment type. It is worth to mention that 38 samples, collected from different Spanish regions, were studied. The statistical tool we used was Principal Component Analysis (PC), in order to reduce the number of response variables. The analysis of variance (ANOVA) test and a non-parametric test such as the Kruskal-Wallis test were also studied through the estimation of the p-value (probability of obtaining a test statistic at least as extreme as the one that was actually observed, assuming that the null hypothesis is true) in order to study possible relations between the concentration of both analytes and the rest of variables. We also compared LAS and insoluble soap behaviors. In addition, the results obtained for LAS (mean value) were compared with the limit value proposed by the future Directive entitled "Working Document on Sludge". According to the results, the mean obtained for soap and LAS was 26.49 g kg(-1) and 6.15 g kg(-1) respectively. It is worth noting that LAS mean was significantly higher than the limit value (2.6 g kg(-1)). In addition, LAS and soap concentrations depend largely on water hardness. However, only LAS concentration depends on treatment type.
Collapse
|
40
|
Boonchai W, Iamtharachai P. The pH of commonly available soaps, liquid cleansers, detergents and alcohol gels. Dermatitis 2010; 21:154-156. [PMID: 20487658] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [MESH Headings] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 05/29/2023]
Abstract
BACKGROUND The hydrogen ion concentration (pH) of a cleanser certainly has an impact on skin condition. Dermatologists always need to recommend a cleanser to patients with hand dermatitis or sensitive skin; particularly during the outbreak of swine (AH1N1 virus) influenza, frequent hand washing and alcohol gel cleansing were greatly recommended. OBJECTIVES The purpose of this study was to evaluate the pH of various commonly available cleansers and alcohol gels on the market to assess patient comfort in using such products and to make good recommendations to our patients. METHODS Multiple brands of liquid cleansers, dishwashing liquids, soaps, laundry detergents, and alcohol gels commonly available on the market were assessed for pH by using a pH meter and pH-indicator strips. The pH assessment imitated real-life conditions by diluting each cleanser with tap water and then comparing the changed pH. RESULTS The pH levels of liquid cleansers, dishwashing liquids, a beauty bar, and alcohol gels were acidic to neutral and compatible with normal skin pH. Most bar soaps, baby soaps, and powdered laundry detergents had a pH in the alkali range. The pH of concentrated cleansers was slightly different from that of their dissolved forms. CONCLUSION Regarding the antiseptic property and pH of the cleansers, alcohol gels with moisturizers appeared to be the best hand cleansers to recommend to our patients.
Collapse
|
41
|
Russell K, Jacob SE. Sodium hydroxymethylglycinate. Dermatitis 2010; 21:109-110. [PMID: 20233550] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [MESH Headings] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 05/28/2023]
Abstract
Sodium hydroxymethylglycinate (SHMG) is a preservative used in many commercially available products, including shampoos, conditioners, soaps, moisturizers, body sprays, baby wipes, room sprays, cleaning agents, and pesticides. It is in a class of chemicals known as formaldehyde-releasing preservatives. Notably, members of this class have been associated with allergic contact dermatitis, possibly due to the agents themselves, the formaldehyde they release, or both. Studies on SHMG in animals have demonstrated potential for sensitization and dermatitis, and formaldehyde-allergic patients have been reported to improve when products containing SHMG are avoided. Patients and providers need to be aware of this preservative.
Collapse
|
42
|
Athalye SK, Garcia RA, Wen Z. Use of biodiesel-derived crude glycerol for producing eicosapentaenoic acid (EPA) by the fungus Pythium irregulare. JOURNAL OF AGRICULTURAL AND FOOD CHEMISTRY 2009; 57:2739-44. [PMID: 19265450 DOI: 10.1021/jf803922w] [Citation(s) in RCA: 75] [Impact Index Per Article: 5.0] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 05/04/2023]
Abstract
Crude glycerol is a major byproduct for the biodiesel industry. Producing value-added products through microbial fermentation on crude glycerol provides opportunities to utilize a large quantity of this byproduct. The objective of this study is to explore the potential of using crude glycerol for producing eicosapentaenoic acid (EPA, 20:5 n-3) by the fungus Pythium irregulare . When P. irregulare was grown in medium containing 30 g/L crude glycerol and 10 g/L yeast extract, EPA yield and productivity reached 90 mg/L and 14.9 mg/L x day, respectively. Adding pure vegetable oils (flaxseed oil and soybean oil) to the culture greatly enhanced the biomass and the EPA production. This enhancement was due to the oil absorption by the fungal cells and elongation of shorter chain fatty acids (e.g., linoleic acid and alpha-linolenic acid) into longer chain fatty acid (e.g., EPA). The major impurities contained in crude glycerol, soap and methanol, were inhibitory to fungal growth. Soap can be precipitated from the liquid medium through pH adjustment, whereas methanol can be evaporated from the medium during autoclaving. The glycerol-derived fungal biomass contained about 15% lipid, 36% protein, and 40% carbohydrate, with 9% ash. In addition to EPA, the fungal biomass was also rich in the essential amino acids lysine, arginine, and leucine, relative to many common feedstuffs. Elemental analysis by inductively coupled plasma showed that aluminum, calcium, copper, iron, magnesium, manganese, phosphorus, potassium, silicon, sodium, sulfur, and zinc were present in the biomass, whereas no heavy metals (such as mercury and lead) were detected. The results show that it is feasible to use crude glycerol for producing fungal biomass that can serve as EPA-fortified food or feed.
Collapse
|
43
|
Abstract
Lawsone (2-hydroxy-1,4-naphthoquinone) is the principal color ingredient in henna, a color additive approved with limitations for coloring hair by the Food and Drug Administration (FDA) under 21 CFR 73.2190. In 2002, the scientific committee on cosmetics and non-food products (SCCNFP), now known as the scientific committee for consumer products (SCCP), evaluated the safety of lawsone as a coloring agent in hair dye products of the European Union (EU). The SCCNFP concluded that lawsone was mutagenic and not suitable for use as a hair coloring agent. As a result, studies were conducted to measure the extent of lawsone absorption through human skin. Lawsone skin absorption was determined from two hair coloring products and two shampoo products, all containing henna. [(14)C]-Lawsone (sp. act. 22.9 mCi/mmol) was added to each commercial product and the products were applied to dermatomed, nonviable human skin mounted in flow-through diffusion cells perfused with a physiological buffer (HEPES-buffered Hanks' balanced salt solution, pH 7.4). Products remained on the skin for 5 minutes (shampoos) and 1 hour (hair color paste). For the henna hair paste products, 0.3 and 1.3% of the applied dose was absorbed into the receptor fluid in 24 hours while 2.2 and 4.0% remained in the skin. For both henna shampoo products, 0.3% of the applied dose was absorbed into the receptor fluid at 24 hours while 3.6 and 6.8% remained in the skin. For all products, most of the lawsone applied was washed from the surface of the skin (83-102%) at the end of the exposure period. Extended absorption studies were conducted for 72 hours to determine if skin levels of lawsone in the 24 hour studies might eventually be percutaneously absorbed. These studies determined that the majority of the lawsone remained in the skin with only a small but significant increase (for three out of four products) in receptor fluid values. Therefore, it appears that receptor fluid values would give a good estimate of lawsone absorption for an exposure estimate and that skin levels of lawsone need not be included.
Collapse
|
44
|
Baldwin RW, Koehler PG, Pereira RM. Toxicity of fatty acid salts to German and American cockroaches. JOURNAL OF ECONOMIC ENTOMOLOGY 2008; 101:1384-1388. [PMID: 18767751 DOI: 10.1603/0022-0493(2008)101[1384:tofast]2.0.co;2] [Citation(s) in RCA: 3] [Impact Index Per Article: 0.2] [Reference Citation Analysis] [Abstract] [MESH Headings] [Subscribe] [Scholar Register] [Indexed: 05/26/2023]
Abstract
The toxicity of fatty acid salts to German, Blattella germanica (L.), and American cockroaches, Periplaneta americana (L.), was evaluated. Potassium and sodium laurate caused up to 95% mortality of German cockroaches and 100% mortality of American cockroaches. Even-numbered potassium fatty acid salts, C8-C18 were assessed for toxicity at 0.125, 0.25, 0.5, 1, and 2% concentrations by a 30-s immersion of cockroaches. The more soluble of the fatty acid salts at 2% concentration caused 65-95% mortality of German cockroaches and 100% mortality of American cockroaches. Potassium oleate, C18, was most toxic to both German (LC50 = 0.36%) and American (LC50 = 0.17%) cockroaches. Fatty acid salt solutions on a substrate were tested by placing cockroaches in contact with treated floor tiles immediately after application (wet) or after the solutions had dried. Sodium laurate and potassium caprate caused mortality of German (62 +/- 17.4 and 58 +/- 12.6%, respectively) and American cockroaches (52 +/- 18.5 and 28 +/- 4.9%, respectively) on wet tiles, whereas potassium oleate caused mortality of German cockroaches (67 +/- 14.1%) only. Dry fatty acids caused no mortality among exposed cockroaches. Fatty acid salt solutions can be effective in killing German and American cockroaches but only when insects are thoroughly wetted with 1-2% fatty acid salt solutions.
Collapse
|
45
|
Tavakoli O, Yoshida H. Application of sub-critical water technology for recovery of heavy metal ions from the wastes of Japanese scallop Patinopecten yessoensis. THE SCIENCE OF THE TOTAL ENVIRONMENT 2008; 398:175-184. [PMID: 18452973 DOI: 10.1016/j.scitotenv.2008.03.019] [Citation(s) in RCA: 4] [Impact Index Per Article: 0.3] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 12/05/2007] [Revised: 03/04/2008] [Accepted: 03/04/2008] [Indexed: 05/26/2023]
Abstract
Sub-critical water (sub-CW) technology was used as a new technology with environmental and financial benefits for the recovery of harmful heavy metal ions Cd (II), Zn (II), Cu (II), Fe (II), Mn (II) and Ni (II) in the waste of Japanese scallop Patinopecten yessoensis. The metals are responsible for environmental problems owing to the large amount of the waste. This study proposes a new method using sub-CW treatment to recover the metal ions from scallop waste and simultaneously produce harmless and valuable materials. Reactions were conducted in a temperature range of 473-653 K and for reaction times of 1-60 min. After the sub-CW reaction, four phases existed: an oil phase, metal-soap phase, aqueous phase and solid residual. Some oil was hydrolyzed by the sub-CW reaction and converted to free fatty acids and glycerin. Free fatty acids reacted with metal ions and became metal-soap phase. Both the metal-soap phase and oil phase caught almost all metal ions at low and medium reaction temperatures (473-573 K) from original wastes, although the concentrations of the metal ions in the metal-soap phase were much higher than those in the oil phase. With increasing temperature, these two phases decomposed and the metal ions concentrated in solid residual (un-reacted waste). The binding mechanisms in the oil and metal-soap phases are discussed including the key functional groups involved. The maximum concentrations of metal ions in metal-soap phase were 7225 ppm (Fe), 862 ppm (Zn), and 800 ppm (Cd) at 573 K. The aqueous phase showed the lowest concentration of metal ions especially at temperatures above 550 K (~1.5 ppm).
Collapse
|
46
|
Roosens L, Covaci A, Neels H. Concentrations of synthetic musk compounds in personal care and sanitation products and human exposure profiles through dermal application. CHEMOSPHERE 2007; 69:1540-7. [PMID: 17631381 DOI: 10.1016/j.chemosphere.2007.05.072] [Citation(s) in RCA: 27] [Impact Index Per Article: 1.6] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 03/02/2007] [Revised: 05/24/2007] [Accepted: 05/26/2007] [Indexed: 05/16/2023]
Abstract
Synthetic musks, such as 7-acetyl-1,1,3,4,4,6-hexamethyl-1,2,3,4-tetrahydronaphthalene (AHTN) and 1,3,4,6,7,8-hexahydro-4,6,6,7,8,8-hexamethylcyclopenta-gamma-2-benzopyran (HHCB), musk ketone (MK) and musk xylene (MX), are used as an alternative for natural musk. Due to their widespread use, these synthetic compounds turned up in different environmental compartments, such as wastewater, human and animal tissues. Yet, little is known about their distribution and occurrence in personal care and household products, information needed in order to evaluate the different human exposure routes. This paper gives an overview of the synthetic musk levels in six different product categories: body lotions, perfumes, deodorants, hair care products, shower products and sanitation products. Especially body lotions, perfumes and deodorants contained high levels of synthetic musks. Maximum concentrations of HHCB, AHTN, MX and MK were 22 mg g(-1), 8 mg g(-1), 26 microg g(-1) and 0.5 microg g(-1), respectively. By combining these results with the average usage of consumer products, low-, medium- and high-exposure profiles through dermal application could be estimated. HHCB was the highest contributor to the total amount of synthetic musks in every exposure profile (18-23 700 microg d(-1)). Exposure to MK and MX did not increase substantially (10-20-fold) between low- and high-exposure profiles, indicating that these compounds cover a less broad range. In comparison, exposure to HHCB and AHTN increased up to 10 000 fold between low- and high-exposure.
Collapse
|
47
|
Besson S, Debrégeas G. Statics and dynamics of adhesion between two soap bubbles. THE EUROPEAN PHYSICAL JOURNAL. E, SOFT MATTER 2007; 24:109-117. [PMID: 17955165 DOI: 10.1140/epje/i2007-10219-y] [Citation(s) in RCA: 6] [Impact Index Per Article: 0.4] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 03/19/2007] [Accepted: 08/07/2007] [Indexed: 05/25/2023]
Abstract
An original set-up is used to study the adhesive properties of two hemispherical soap bubbles put into contact. The contact angle at the line connecting the three films is extracted by image analysis of the bubbles profiles. After the initial contact, the angle rapidly reaches a static value slightly larger than the standard 120 degrees angle expected from Plateau rule. This deviation is consistent with previous experimental and theoretical studies: it can be quantitatively predicted by taking into account the finite size of the Plateau border (the liquid volume trapped at the vertex) in the free energy minimization. The visco-elastic adhesion properties of the bubbles are further explored by measuring the deviation Delta theta (d)(t) of the contact angle from the static value as the distance between the two bubbles supports is sinusoidally modulated. It is found to linearly increase with Delta r(c) / r(c) , where r(c) is the radius of the central film and Delta r(c) the amplitude of modulation of this length induced by the displacement of the supports. The in-phase and out-of-phase components of Delta theta (d)(t) with the imposed modulation frequency are systematically probed, which reveals a transition from a viscous to an elastic response of the system with a crossover pulsation of the order 1rad x s(-1). Independent interfacial rheological measurements, obtained from an oscillating bubble experiment, allow us to develop a model of dynamic adhesion which is confronted to our experimental results. The relevance of such adhesive dynamic properties to the rheology of foams is briefly discussed using a perturbative approach to the Princen 2D model of foams.
Collapse
|
48
|
Infection risks at petting zoos...reducing infections: "antibacterial" soaps don't help...but certain equipment in childcare centers does. CHILD HEALTH ALERT 2007; 25:1-2. [PMID: 18273933] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [MESH Headings] [Subscribe] [Scholar Register] [Indexed: 05/25/2023]
|
49
|
Stuart MCA, van Esch J, van de Pas JC, Engberts JBFN. Chain-length and solvent dependent morphological changes in sodium soap fibers. LANGMUIR : THE ACS JOURNAL OF SURFACES AND COLLOIDS 2007; 23:6494-7. [PMID: 17488042 DOI: 10.1021/la063633l] [Citation(s) in RCA: 7] [Impact Index Per Article: 0.4] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 05/15/2023]
Abstract
Sodium soap fibers with varying alkyl chain lengths were studied by cryotransmission electron microscopy and differential scanning calorimetery in water and water-propylene glycol mixtures. The morphology of the lamellar fibers was found to be dependent on the chain length of the alkyl chain and the solvent polarity. Cryoelectron microscopy revealed that short-chain (C10-C14) sodium soaps have the bilayer plane perpendicular to the fiber width, which enables one to see the bilayer striations on the fibers, whereas long-chain (C16-C20) sodium soaps have bilayer planes parallel to the fiber width, and the bilayer striations are not visible. This change in morphology is accompanied by a change in dissolution enthalpy.
Collapse
|
50
|
Zhu S, Pudney PDA, Heppenstall-Butler M, Butler MF, Ferdinando D, Kirkland M. Interaction of the acid soap of triethanolamine stearate and stearic acid with water. J Phys Chem B 2007; 111:1016-24. [PMID: 17266256 DOI: 10.1021/jp0659047] [Citation(s) in RCA: 26] [Impact Index Per Article: 1.5] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/30/2022]
Abstract
Stearic acid and triethanolamine (TEA) in a molar ratio of 2:1 were mixed in aqueous solution at 80 degrees C and subsequently cooled to ambient temperature. The structural evolution of the resultant sample during storage was characterized by using light microscopy, Cryo-SEM, differential scanning calorimetery, pH, infrared spectroscopy, elemental analysis, and simultaneous small and wide-angle X-ray diffraction. It was found that a lamellar liquid crystalline phase was formed when stearic acid and TEA solution were mixed at 80 degrees C and multilamellar spheres of a few microns diameter were formed initially after cooling. A hydrolysis reaction (i.e., the reverse reaction of neutralization between stearic acid and TEA) occurred thereafter that caused the breakdown of the lamellar gel phase and the formation of platelet stearic acid crystals. Three polymorphs of stearic acid (defined following previous work as the A, C, and E forms) were formed as the result of hydrolysis reaction, which gave rise to a strong optically pearlescent appearance.
Collapse
|