The safety of paediatric dentistry procedures under general anaesthesia. A five-year experience of a tertiary care center

AIM

Frequently general anaesthesia (GA) is used to treat noncompliant children. Especially in children with morbid diseases general anaesthesia can be a challenging procedure for anaesthetists. The aim of this paper was to evaluate the risks and adverse reactions with a special focus on the impact of existing medication conditions and syndromes.

MATERIALS AND METHODS

and methods Records of children up to 10 years of age, who were admitted for paediatric dentistry procedures under GA from January 2011 to December 2016 at the University Hospital of the University of Aachen (Germany), were reviewed. A special attention was paid to the intra- and perioperative critical adverse reactions and concomitant systemic conditions and their impact on treatment outcome.

RESULTS

Two hundred and twenty patients were admitted for dental restorations. Critical adverse reactions occurred in 4% of the treated patients and they were statistically significantly (p=0.004) related to the ASA classification above II. The use of a laryngeal mask airway was significantly associated (p<0.001) with a shorter duration of surgery. Most common concomitant medical conditions were congenital heart disease, mental retardation and inherited syndromes.

CONCLUSION

Although the administration of general anaesthesia in infants and children can be regarded as a safe procedure, clinically significant adverse reactions can occur, especially in patients with an existing medical condition.

Hand Perfusion in Patients with Physiological or Pathological Allen's Tests

Background The Allen test (AT) is a widely used clinical tool for the preoperative assessment of sufficient dual vessel hand perfusion although the impact of a pathological AT on tissue perfusion of the hand is not entirely clear. This study reveals perfusion changes of the hand in patients with pathological and physiological AT after terminating the dual blood supply.

Methods Patients were distributed into 2 groups (physiological and pathological AT) that each contained 25 members. Perfusion of the thumb, middle, and small fingers was measured with a laser Doppler based (“oxygen-to-see” [O2C]) device. A steady state was measured and also values at 1, 3, 5, and 10 minutes after radial occlusion were measured.

Results In patients with a physiological AT, only 1 out of 18 values differed significantly from the steady state measurements after 10 minutes, whereas patients with a pathological AT showed significant alterations in 8 out of 18 values. Oxygen saturation of the superficial and deep tissues appeared to be significantly worse in patients with a pathological AT.

Conclusion Patients with a pathological AT suffered significantly more from the loss of dual hand perfusion than patients with a physiological AT. Patients with a pathological AT need more time to compensate for the altered perfusion pattern.

Development of a Rapid Analysis Method for Bone Resection Margins for Oral Squamous Cell Carcinoma by Immunoblotting

The purpose of this proof-of-principle study was to develop a rapid and approachable method to analyse bone resection margins in patients with oral squamous cell carcinoma (OSCC) in an intraoperative setting, similar to assessing frozen sections of soft tissue. Bone excision and risk of remaining tumour cells could be minimised, thus improving reconstruction measures and facilitating convalescence. Frozen, sawed wafers of porcine bone artificially combined with porcine skin (simulating OSCC properties) were used to develop and evaluate a new molecular method: protein transfer from non-decalcified, sawed wafers onto a membrane stained by immunofluorescence (Tissue-ProtTrans). Tissue-ProtTrans was based on the detection of keratin 5/6 as a marker of tumour cells. The results were compared to standard immunohistochemistry (IHC) and H&E results of the same wafers after decalcification. Tissue-ProtTrans resulted in a total assay time of 3.5 h using the Trans-Blot® Turbo™ Transfer System (Bio-Rad) for protein transfer. Amersham Protran® Premium Nitrocellulose Membranes 0.2 µm (GE Healthcare) were stained with a primary antibody to keratin 5/6 (Dako Agilent) and a secondary antibody labelled with IRDye® 800CW (LI-COR). Visualisation was performed with an infrared laser scanner (Odyssey). Upon comparison, five independent experiments on porcine specimens processed with the Tissue-ProtTrans showed similar results to standard IHC and H&E analysis. In comparison to standard IHC results (requiring several days due to decalcification) Tissue-ProtTrans provided similar results, but was much faster (3.5 h). This highly promising method has good potential for further time reduction and will be suitable for intraoperative assessment.

Volumetric comparison of autogenous bone and tissue-engineered bone replacement materials in alveolar cleft repair: a systematic review and meta-analysis

The goal of reconstruction of the alveolar cleft in patients with cleft lip and palate is to improve the quality of tissue, the structural stability, and increase the volume of bone. This study is a systematic review with meta-analysis of volumetric bony filling using autogenous bone and various tissue-engineered bone substitutes. We made an electronic search on MEDLINE, EMBASE, SCOPUS, WEB OF SCIENCE, "grey" publications (materials and research produced by organisations outside traditional channels for commercial or academic publishing and distribution), and relevant cross references according to the Preferred Reporting Items for Systematic Reviews and Meta-Analyses (PRISMA) guidelines. Studies that reported the outcomes of volumetric grafting were included in the meta-analysis. Of 1276 studies, 26 were included in the meta-analysis. Pooled analysis of 25 studies that used autogenous bone showed a significant reduction in the volume of the cleft equivalent to 62.0% bone fill (95% CI 54.3 to 69.6), in contrast to 10 studies that used a tissue-engineered material and reported bone filling of 68.7% (95% CI 54.5 to 82.8). The estimated sizes of pooled effects across studies showed that there was no significant difference between the two major intervention groups (p value 0.901). Our statistical analysis showed that autogenous bone grafts did not differ significantly from tissue-engineered materials in their ability to fill clefts. Systematic review registration: International Prospective Register of Systematic Reviews, PROSPERO (CRD42017065045).

Distress thermometer for preoperative screening of patients with oral squamous cell carcinoma

In this study, we evaluate the association between distress, various demographic and medical variables, and the prevalence of psychosocial distress in preoperative patients with oral squamous cell carcinoma. A total of 100 consecutive patients were recruited into the study and asked to complete the Distress Thermometer (DT) form with the Problem List questionnaire prior to surgical intervention; the average distress score was 5.7 ± 2.7. The distress score was neither correlated with age (r = -0.025; p = 0.804) nor with tumor size (r = 0.028; p = 0.785). General worries, anxiety, sadness, depression, pain, exhaustion, sleeping disorders, or problems with nutrition resulted in significantly higher distress scores compared to patients without these complaints. Individuals with a DT score of 5 or higher (p = 0.006) were advised to seek out psychological support. There is a strong correlation between a high DT score and emotional disorders, as well as physical problems.

Comparison of mucosal and mucoperiosteal wound cover for the treatment of medication-related osteonecrosis of the jaw lesions: a retrospective cohort study

OBJECTIVES

Actually, there is no detailed guidance on how to deal with wound closure after surgical removal of medication-related osteonecrosis of the jaw (MRONJ) lesions. This study attempts to compare the difference in outcome between the mucosal and the mucoperiosteal flap closure after surgery.

PATIENTS AND METHODS

In this retrospective monocentric cohort study, patients (n = 61; 35 female/26 male) suffering from MRONJ and requiring surgical therapy at the University of Aachen between 2013 and 2015 were included. Due to intra-institutional variances, one group was treated with the mucosal, the other group with the mucoperiosteal technique. The success rate, i.e., mucosal closure and no relapse at the point of follow-up, was evaluated and compared. All patients were clinically investigated for the postoperative follow-up during a special consultation appointment.

RESULTS

The success rates between the different techniques after 2 years follow-up were very similar. In the group of mucosal wound closure, 22 of 29 (75.86%) patients revealed mucosal integrity without signs of MRONJ. The rate in the mucoperiosteal wound closure group was almost identical (24 of 32 (75%)).

CONCLUSION

No differences in the success rates between the two different techniques could be evaluated.

CLINICAL RELEVANCE

The results of this study suggest that the complete removal of the necrotic bone might have a higher impact on the success rates than the technique of the wound closure. Due to the fact that the mucoperiosteal wound closure technique offers a better overview of the extent of the MRONJ lesion, the authors advise to use this technique.

Preoperative assessment of the risk of postoperative death in patients with oral squamous cell carcinoma: a consideration beyond age, sex, and stage of cancer

Despite improvements in the management of patients in critical care, about 3% patients who have an operation with curative intent for oral squamous cell carcinoma (SCC) do not survive their stay in hospital. Our aim was to assess the risk factors for postoperative death that were independent of the stage of the cancer, or the age and sex of the patients. We screened 4760 consecutive inpatients at a maxillofacial tertiary care centre from 2011 to 2016, and 34 of them had died within the first three months after operation. We matched them with a further 34 patients with the same TNM stage, age, and sex. General personal and clinical data and preoperative laboratory values were screened, and we applied a Charlson Comorbidity Score (for anaesthetic risk) for each group. Patients' mean (SD) age was 66 (12) years old. There was no significant difference in sex (p=1), age (p=0.718), or TNM classification. Those who died after operation had significantly more renal (p=0.027) and gastrointestinal (p=0.006) diseases, but cardiac diseases (p=0.468) and diabetes mellitus (p=1) were not significant risk factors in themselves. Patients who died postoperatively had significantly worse risk scores (p=0.001) overall. The most common causes of death were septic shock (n=10) and acute cardiac (n=9) or respiratory failure (n=7). Our findings suggested that general diseases were not intrinsically a contraindication for operation with curative intent. The Charlson Comorbidity Score helped to detect potentially fatal courses and could be useful in the preoperative assessment of patients whose general health is not good.

Effect of strontium surface-functionalized implants on early and late osseointegration: A histological, spectrometric and tomographic evaluation

Numerous in vivo, in vitro and clinical studies report on beneficial effects of strontium with respect to increased bone growth. Based on this knowledge the aim of this study was to evaluate early and late osseointegration stages of functionalized titanium implants showing sustained release of strontium (Sr) and further investigate its potential systemic effect. Strontium functionalized (Ti-Sr-O) and Grade 4 (Control) titanium implants were inserted in the femoral condyle of New Zealand White rabbits. The Ti-Sr-O coating was characterized using Scanning Electron Microscopy (SEM) and Energy Dispersive X-ray Spectrometry (EDX) for structure, coating thickness and chemical composition. Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-AES) was used to evaluate released strontium in vitro while Atomic Absorption Spectrometry (AAS) was utilized to monitor serum levels of strontium and calcium. Additionally, histological and tomographic analysis of bone-to-implant contact (BIC%) and bone formation (BF%) was performed, following implantation periods of two or twelve weeks, respectively. Median values for BIC% for Ti-Sr-O revealed significant differences within the two- and twelve-week observation periods, while exceeding BF% was discovered especially after twelve weeks when performing the histological evaluation. The results from the micro-computed tomography (µ-CT) showed no significant differences, when comparing the experimental groups. AAS measurements did not indicate a systemic effect by the local strontium release. Within the limitations of the study, it was shown that a Ti-Sr-O coating with sustained release characteristics of strontium, accelerates bone apposition and represents a potential potent surface modification for endosseous medical implant devices.

STATEMENT OF SIGNIFICANCE

This study presents first data with respect to early and late in vivo response on a strontium functionalized titanium surface comprising a nanotopography manufactured by a magnetron sputtering process. We investigated different osseointegration stages of screw-shaped implants with dental implant geometries in a rabbit femur model observing beneficial effects of the functionalized surface on bone-to-implant contact and bone formation caused by tailored release of the bone anabolic strontium. Histomorphometrical data revealed that a functionalized titanium surface with controlled liberation of strontium accelerates osseointegration while spectrometry measurements did not indicate a potential systemic effect of this osteoinductive agent and could thus have impact on modifications of medical implant devices.

Cortical Bone Repositioning Technique for Horizontal Alveolar Bone Augmentation: A Case Series

The objective of this study was to present a novel procedure for cortical bone repositioning (CBR) that maintains a secure space under the periosteum by replacement of the lateral cortex via fixation, employing titanium screws. Seven systemically healthy patients presenting with horizontal alveolar bone defects in radiographs and CT images were enrolled for CBR technique for horizontal alveolar bone augmentation. A lateral cortical bone block was cut in the defects and freed from the original bony surface. A screw was inserted into the block, and the block was placed laterally to allow fixation. The block was checked for adequate stability, and the flap was closed after creation of periosteal releasing incisions to ensure tension-free closure. There were no complications, and 16 implants were placed uneventfully. Preoperative bone width in the defect area was 3.28 mm; the postoperative 4-month bone width in the same area was 6.46 mm. The mean implant stability quotient (ISQ) at placement was 68. At the secondary operation for changing to a healing abutment, the mean ISQ was 72. All patients were functionally and esthetically rehabilitated with implant-supported dentures. CBR technique is a simple procedure without the use of any biomaterials or devices. The main advantage of this technique in comparison to autogenous grafts is the lack of donor site issues. This technique has the possibility of inducing the patient's regenerative ability for bone healing.

Bone regeneration using composite non-demineralized xenogenic dentin with beta-tricalcium phosphate in experimental alveolar cleft repair in a rabbit model

Background

Alveolar cleft repair is performed via bone grafting procedure to restore the dental arch continuity. A suitable bone substitute materials should possess osteoinductive and osteoconductive properties, to promote new bone formation, along with a slowly resorbable scaffold that is subsequently replaced with functionally viable bone. Calcium phosphate biomaterials have long proved their efficacy as bone replacement materials. Dentin in several forms has also demonstrated its possibility to be used as bone graft replacement material in several studies. The purpose of this study was to evaluate bone regeneration pattern and quantify bone formation after grafting pre-established experimental alveolar clefts defects model in rabbits using composite xenogenic dentin and β-TCP in comparison to β-TCP alone.

Methods

Unilateral alveolar cleft defects were created in 16 New Zealand rabbits according to previously described methodology. Alveolar clefts were allowed 8 weeks healing period. 8 defects were filled with β-TCP, whereas 8 defects filled with composite xenogenic dentin with β-TCP. Bone regeneration of the healed defects was compared at the 8 weeks after intervention. Quantification of bone formation was analyzed using micro-computed tomography (µCT) and histomorphometric analysis.

Results

µCT and histomorphometric analysis revealed that defects filled with composite dentin/β-TCP showed statistically higher bone volume fraction, bone mineral density and percentage residual graft volume when compared to β-TCP alone. An improved surgical handling of the composite dentin/β-TCP graft was also noted.

Conclusions

Composite xenogenic dentin/β-TCP putty expresses enhanced bone regeneration compared to β-TCP alone in the reconstruction of rabbit alveolar clefts defects.

A rabbit model for experimental alveolar cleft grafting

Objectives

The purpose of the present study was to develop an animal model for creating alveolar cleft defects with properly simulated clinical defect environment for tissue-engineered bone-substitute materials testing without compromising the health of the animal. Cleft creation surgery was aimed at creating a complete alveolar cleft with a wide bone defect with an epithelial lining (oral mucosa) overlying the cleft defect.

Methods

A postmortem skull of a New Zealand White (NZW) rabbit skull (Oryctolagus cuniculus) underwent an osteological and imaging survey. A pilot postmortem surgery was conducted to confirm the feasability of a surgical procedure and the defect was also radiologically confirmed and illustrated with micro-computed tomography. Then, a surgical in vivo model was tested and evaluated in 16 (n = 16) 8-week-old NZW rabbits to create in vivo alveolar cleft creation surgery.

Results

Clinical examination and imaging analysis 8 weeks after cleft creation surgery revealed the establishment of a wide skeletal defect extending to the nasal mucosa simulating alveolar clefts in all of the rabbits.

Conclusions

Our surgical technique was successful in creating a sizable and predictable model for bone grafting material testing. The model allows for simulating the cleft site environment and can be used to evaluate various bone grafting materials in regard to efficacy of osteogenesis and healing potential without compromising the health of the animal.

Influence of Connecting Two Standalone Mobile Three-Dimensional Scanners on Accuracy Comparing with a Standard Device in Facial Scanning

Objectives

In this study is investigated if bundling of two scanners leads to better accuracy in recording faces than a standard face-scanning device.

Material and Methods

In a group of 28 volunteers, two test specimens were attached to their faces: one on their forehead and one turned 90° on their cheek. Each volunteer was scanned by FaceScan3D^® and two bundled Artec EVA^® scanners. The scans were aligned to a three-dimensional model of the test specimen, and the mean error was recorded. Length, width and angles between the test specimen’s planes were compared.

Results

The mean deviation is significantly lower for the cheek test specimen in alignment (P < 0.001), length and width (P < 0.001) but not for the forehead test specimen in alignment and length and width (P > 0.05) using FaceScan3D^®. The aberration from the original angle between two sides of the test specimen is significantly lower measured with Artec EVA^® for the angle between the front and the bottom plane of both test specimens (P < 0.01). Besides the angle between the right plane and the bottom plane as well as the top plane of the test specimen mounted to the cheek, the deviation of the angle between the other side planes to each other is significantly lower (P > 0.05) scanned with Artec EVA^®.

Conclusions

Compared to FaceScan3D^®, two bundled Artec EVA^® scanners provide different accuracies depending on the location of the measured parameters. The accuracy measured for both scanners is inside the range found in the literature.