First imaging result with an ultrahigh resolution stationary MR compatible SPECT system

In this paper, we will present the design and preliminary performance of an ultrahigh resolution stationary MR compatible SPECT (MRC-SPECT) system that is developed in our lab. The MRC-SPECT system is based on the second-generation energy-resolved photon-counting (ERPC) CdTe detectors and there are several key features associated with this system. Firstly, up to a total of twenty ERPC detectors will be assembled as a very compact ring, which provides an adequate angular sampling capability and a relatively high detection efficiency. The detectors are supported on a gantry made of high strength polyamide structure constructed using 3-D printing. This compact system can be directly operated inside an MR scanner. The detector module used in this system offers an intrinsic resolution of 350μm and an excellent energy resolution of around 3~4kev. Each ERPC detector module consists of four pixelated CdTe detectors with a total dimension of 4.5cm×2.25cm. Secondly, a die-cast platinum pinhole inserts and cast lead apertures are developed for this stationary SPECT system. Four 300/500μm diameter pinholes are used for each detector and all pinholes are mounted around a casted cylinder lead aperture tube. The inner diameter of the lead aperture tube is 6cm and the lead tube thickness is 16mm. The opposite detectors are placed 15.6cm apart and the magnification factor of this SPECT system is about 1.2. Thirdly, a comprehensive charge collection model inside strong magnetic field has been developed to account for the magnetic field induced distortion in the SPECT image. This model can accurately predict the detector's energy and spatial response to gamma ray incident events and then help to compensate for the event position recording error due to the strong magnetic field. In this development, we have made an effort to minimize the amount of magnetic materials in the system to alleviate potential interference to magnetic field inhomogeneity.

Ab initio studies on the optical effects in the deep ultraviolet nonlinear optical crystals of the KBe2BO3F2 family

Electronic structures of the deep ultraviolet nonlinear optical crystals of the KBe(2)BO(3)F(2) (KBBF) family, including KBBF, RbBe(2)BO(3)F(2) and CsBe(2)BO(3)F(2), have been investigated based on a plane-wave pseudopotential method. Their linear and nonlinear optical coefficients are also calculated, and are in good agreement with the experimental results. A real-space atom-cutting method is adopted to analyze the respective contributions of the alkali metal cations and anionic groups to optical response. The results show that the contributions of anionic groups to the nonlinear optical anisotropic responses are dominant, but the influence of the A-site alkali metal cations becomes slightly more pronounced with the increase of their radius. Moreover, the birefringence difference among these crystals strongly depends on the volume effect, i.e., the spatial density of the (BO(3))(3-) anionic groups.

Inhibitory Effects of Chinese Medicinal Herbs on Plant-Pathogenic Bacteria and Identification of the Active Components from Gallnuts of Chinese Sumac

The aqueous extracts of 30 out of 67 Chinese medicinal herbs were shown to have inhibitory effects on growth of Xanthomonas euvesicatoria by a paper disc diffusion assay. The inhibitory substances with the strongest antibacterial activity were extracted from Chinese sumac gallnut and black myrobalan. The aqueous extract of gallnut inhibited the growth of eight of the tested plant-pathogenic bacteria, and that of black myrobalan inhibited five. The gallnut extract produced at least an 8-mm inhibition zone against Acidovorax citrulli, Ralstonia solanacearum, X. citri pv. citri, and X. euvesicatoria at a 10-fold dilution, and it was still active at 800- to 1,600-fold dilutions. The aqueous extract of gallnut was more inhibitory than the acetone-water extract. To identify the inhibitory compounds in the gallnut aqueous extract, the crude extract was chromatographed over a silica column, and the primary compounds in fractions 3 and 8 were identified by nuclear magnetic resonance as gallic acid and methyl gallate, respectively. The inhibitory effect of methyl gallate on the growth of four plant-pathogenic bacteria was 10 to 80 times that of gallic acid. The minimum inhibition and minimum bactericidal concentration tests showed that the inhibition effect of the original aqueous was higher than that of methyl gallate. These results indicate that methyl gallate in gallnut is an important compound that is inhibitory to plant-pathogenic bacterial growth, and there are other unidentified compounds that are also responsible for the antibacterial effects. This is the first report regarding the antibacterial effects of gallnut extract and its chemical components on plant-pathogenic bacteria.

Energy band gap engineering in borate ultraviolet nonlinear optical crystals: ab initio studies

The development of ultraviolet (UV) nonlinear optical (NLO) crystals demands optical materials with wide energy band gaps. Here we report first-principles studies on the electronic structures in several UV NLO borates with representative structures. Combined with model analysis, we find that the oxygen non-bonding 2p orbitals play an important role on the top of valence bands. The energy band gap can be adjusted by modifying the coordination environment around the oxygen atoms. Under ideal conditions the energy band gaps achieve 9 eV if the non-bonding orbitals are totally eliminated, despite the original values varying from 6.6 to 8.3 eV.

Improve efficiency of white organic light-emitting diodes by using nanosphere arrays in color conversion layers

The authors demonstrated an efficient color conversion layer (CCL) by using nanosphere arrays in down-converted white organic light-emitting diodes (WOLEDs). The introduced periodical nanospheres not only helped extract the confined light in devices, but also increased the effective light path to achieve high-efficiency color conversion. By applying a CCL with red phosphor on a 400-nm-period nanosphere array, we achieved 137% color conversion ratio for blue OLEDs, which was 2.68 times higher than conventional flat CCL. The resulting luminous efficiency of WOLEDs with patterned CCLs (20.97 cd/A, 1000 cd/m2) was two times higher than the efficiency of the flat device (10.26 cd/A, 1000 cd/m2).

Conformation and π-conjugation of olefin-bridged acceptor on the pyrrole β-carbon of nickel tetraphenylporphyrins: implicit evidence from linear and nonlinear optical properties

This paper has scrutinized, both experimentally and theoretically, the conformation of an olefinic substituent on the pyrrole β-carbon of tetraphenylporphyrin. Compelling evidences collected from linear optical absorption and NOESY 1H NMR experiment strongly suggest that, in solution, it is highly possible for the olefinic acceptor on pyrrole β-carbon to have a coplanar or near coplanar conformation with the pyrrole of the porphyrin core. This conformation ensures effective π-conjugation between the pyrrole ring and its olefinic substituent which is reflected in the linear absorption spectroscopy as the red-shifting of both Soret and Q-bands and possibly the splitting of the absorption Soret band. The intensified long wavelength absorption Q-band of the porphyrin is also consistent with the proposed π-conjugation. Regarding nonlinear optical absorption, an active nonlinear optical (NLO) response has been observed for these porphyrins, indicative of efficient electronic coupling (resonance interaction) between the electronic acceptor and porphyrin macrocyclic ring, compatible with a coplanar or near coplanar conformation in order to achieve π-conjugation. Such conformation of the peripherally appended olefinic acceptor has been further confirmed by INDO/1 Hamiltonian in the ZINDO computational calculations. The INDO/S electron density calculation further reveals that the range of intramolecular charge-transfer (ICT) does not encompass the whole porphyrin core but is mostly confined to the pyrrole ring attached to the olefin-linked acceptor. Furthermore, ICT characteristics were found to be more heavily involved in the Soret absorption band than Q-band. Our analysis of the porphyrin π-conjugation is consistent with modest solvatochromic behavior and the moderate NLO activity of the porphyrins compared with NLO chromophores with many less π-electrons.

L-arginine trifluoroacetate salt bridges in its solid state compound: the low-temperature three dimensional structural determination of L-arginine bis(trifluoroacetate) crystal and its vibrational spectral analysis

Structural varieties of L-arginine trifluoroacetate (abbreviated as LATF) and L-arginine bis(trifluoroacetate), LABTF, in the solid state compounds were observed and analyzed by the nuclear magnetic resonance (NMR) spectroscopy. The guanidinium-carboxylate interaction plays an important role involving in the crystal structure construction. Conformational changes of L-Arg(+) and L-Arg(2+) cations result from the intrinsic structural difference by hydrogen bonding and electrostatic interactions. The low-temperature structure of its crystalline salt, L-arginine bis(trifluoroacetate), was determined to describe the hydrogen bonding interactions. In comparison with the crystal structure at room temperature, the low-temperature L-Arg(2+) cations present tiny conformational difference and the rotational disorder of CF(3) group disappears. FT-IR and Raman spectra were investigated and hydrogen bonding interactions were analyzed on the basis of its vibrational spectra. Results indicate that this type interaction is greatly contributive to the structural features and vibrational spectral properties.

Microscopic origin of the giant ferroelectric polarization in tetragonal-like BiFeO(3)

We report direct experimental evidence for a room-temperature, ∼130  μC/cm(2) ferroelectric polarization from the tetragonal-like BiFeO(3) phase. The physical origin of this remarkable enhancement of ferroelectric polarization has been investigated by a combination of x-ray absorption spectroscopy, scanning transmission electron microscopy, and first principles calculations. A large strain-induced Fe-ion displacement relative to the oxygen octahedra, combined with the contribution of Bi 6s lone pair electrons, is the mechanism driving the large ferroelectric polarization in this tetragonal-like phase.

Determination of the Co valence in bilayer hydrated superconducting NaxCoO2 · yH2O by soft x-ray absorption spectroscopy

We addressed the so-far unresolved issue concerning the Co valence in the superconducting bilayer hydrated Na(x)CoO(2) · yH(2)O (x∼0.35, y∼1.3) using soft x-ray absorption spectroscopy at the Co-L(2,3) and O-K edges. We find that the valence state of the Co lies in a narrow range from +3.3 to +3.4 for all studied Na(x)CoO(2) · yH(2)O samples and their deuterated analogue with T(c)'s ranging from 3.8 to 4.7 K. These valence values are far from the often claimed +3.7, the number based on the Na content only. We propose to modify the phase diagram accordingly, where the basic electronic structure of the superconducting phase is very close to that of the Na(0.7)CoO(2) system, suggesting that the presence of in-plane spin fluctuations could play an important role for the superconductivity.

Effect of co-doping of donor and acceptor impurities in the ferromagnetic semiconductor Zn(1-x)Cr(x)Te studied by soft x-ray magnetic circular dichroism

We have performed x-ray absorption spectroscopy (XAS) and x-ray magnetic circular dichroism (XMCD) studies of the diluted ferromagnetic semiconductor Zn(1-x)Cr(x)Te doped with iodine (I) or nitrogen (N), corresponding to electron or hole doping, respectively. From the shape of the Cr 2p absorption peak in the XAS spectra, it was concluded that the Cr ions in the undoped, I-doped and lightly N-doped samples are divalent (Cr(2+)), while Cr(2+) and trivalent (Cr(3+)) coexist in the heavily N-doped sample. This result indicates that the doped nitrogen atoms act as acceptors but that doped holes are located on the Cr ions. In the magnetic field dependence of the XMCD signal at the Cr 2p absorption edge, ferromagnetic behaviors were observed in the undoped, I-doped, and lightly N-doped samples, while ferromagnetism was considerably suppressed in the heavily N-doped sample, which is consistent with the results of magnetization measurements.

Bulk and surface magnetization of Co atoms in rutile Ti(1-x)Co(x)O(2-δ) thin films revealed by x-ray magnetic circular dichroism

We have studied magnetism in Ti(1-x)Co(x)O(2-δ) thin films with various x and δ by soft x-ray magnetic circular dichroism (XMCD) measurements at the Co L(2, 3) absorption edges. The estimated ferromagnetic moment by XMCD was 0.15-0.24 µ(B)/Co at the surface, while in the bulk it was 0.82-2.25 µ(B)/Co, which is in the same range as the saturation magnetization of 1.0-1.5 µ(B)/Co. These results suggest an intrinsic origin of the ferromagnetism. The smaller moment of the Co atom at the surface is an indication of a magnetically dead layer of a few nanometers thick at the surface of the thin films.

Development of the sediment and water quality management strategies for the Salt-water River, Taiwan

The Salt-water River watershed is one of the major river watersheds in the Kaohsiung City, Taiwan. Water quality and sediment investigation results show that the river water contained high concentrations of organics and ammonia-nitrogen, and sediments contained high concentrations of heavy metals and organic contaminants. The main pollution sources were municipal and industrial wastewaters. Results from the enrichment factor (EF) and geo-accumulation index (Igeo) analyses imply that the sediments can be characterized as heavily polluted in regard to Cd, Cr, Pb, Zn, and Cu. The water quality analysis simulation program (WASP) model was applied for water quality evaluation and carrying capacity calculation. Modeling results show that the daily pollutant inputs were much higher than the calculated carrying capacity (1050 kg day(-1) for biochemical oxygen demand and 420 kg day(-1) for ammonia-nitrogen). The proposed watershed management strategies included river water dilution, intercepting sewer system construction and sediment dredging.

Toluidine blue O photodynamic inactivation on multidrug-resistant Pseudomonas aeruginosa

BACKGROUND AND OBJECTIVES

Multidrug-resistant (MDR) Pseudomonas aeruginosa infection is becoming a critical problem worldwide. Currently, only limited therapeutic options are available for the treatment of infections caused by MDR P. aeruginosa, therefore, the development of new alternative treatments is needed. Toluidine blue O (TBO) is an effective antibacterial photosensitizing agent against various bacteria. However, reports on antibacterial photosensitization of MDR bacteria are limited. This study aims to determine the in vitro photobactericidal activity of TBO against MDR P. aeruginosa.

STUDY DESIGN/MATERIALS AND METHODS

The efficacy of antibacterial photodynamic inactivation, DNA fragmentation and protein carbonylation of three MDR P. aeruginosa strains and one susceptible strain was compared using TBO as the photosensitizer followed by red light irradiation (630 nm, 90 J/cm(2)) from a light-emitting diode light source. Subsequently, the efficacy of TBO photodynamic inactivation (TBO-PDI) on 60 MDR strains, including 11 with the efflux pump phenotype and 49 with no pump activity, was tested using the minimum lethal drug concentration (MLC) assay.

RESULTS

TBO-PDI caused similar bactericidal effect (6-7 logs of killing effect), DNA fragmentation and protein carbonylation in three MDR and one susceptible P. aeruginosa strains. Although the TBO accumulation assay indicated that TBO is a substrate for the efflux pump, TBO-PDI produce similar photobactericidal activity against 60 MDR P. aeruginosa strains, either with or without efflux-pump phenotype, and 19 susceptible strains.

CONCLUSION

MDR did not affect the susceptibility of P. aeruginosa strains to TBO-PDI. The efflux pump played an insignificant role in TBO-PDI of MDR P. aeruginosa.

Hydroxynaphthyridine-derived group III metal chelates: wide band gap and deep blue analogues of green Alq3 (tris(8-hydroxyquinolate)aluminum) and their versatile applications for organic light-emitting diodes

A series of group III metal chelates have been synthesized and characterized for the versatile application of organic light-emitting diodes (OLEDs). These metal chelates are based on 4-hydroxy-1,5-naphthyridine derivates as chelating ligands, and they are the blue version analogues of well-known green fluorophore Alq(3) (tris(8-hydroxyquinolinato)aluminum). These chelating ligands and their metal chelates were easily prepared with an improved synthetic method, and they were facially purified by a sublimation process, which enables the materials to be readily available in bulk quantity and facilitates their usage in OLEDs. Unlike most currently known blue analogues of Alq(3) or other deep blue materials, metal chelates of 4-hydroxy-1,5-naphthyridine exhibit very deep blue fluorescence, wide band gap energy, high charge carrier mobility, and superior thermal stability. Using a vacuum-thermal-deposition process in the fabrication of OLEDs, we have successfully demonstrated that the application of these unusual hydroxynaphthyridine metal chelates can be very versatile and effective. First, we have solved or alleviated the problem of exciplex formation that took place between the hole-transporting layer and hydroxynaphthyridine metal chelates, of which OLED application has been prohibited to date. Second, these deep blue materials can play various roles in OLED application. They can be a highly efficient nondopant deep blue emitter: maximum external quantum efficiency eta(ext) of 4.2%; Commision Internationale de L'Eclairage x, y coordinates, CIE(x,y) = 0.15, 0.07. Compared with Alq(3), Bebq(2) (beryllium bis(benzoquinolin-10-olate)), or TPBI (2,2',2''-(1,3,5-phenylene)tris(1-phenyl-1H-benzimidazole), they are a good electron-transporting material: low HOMO energy level of 6.4-6.5 eV and not so high LUMO energy level of 3.0-3.3 eV. They can be ambipolar and possess a high electron mobility of 10(-4) cm(2)/V s at an electric field of 6.4 x 10(5) V/cm. They are a qualified wide band gap host material for efficient blue perylene (CIE(x,y) = 0.14, 0.17 and maximum eta(ext) 3.8%) or deep blue 9,10-diphenylanthracene (CIE(x,y) = 0.15, 0.06 and maximum eta(ext) 2.8%). For solid state lighting application, they are desirable as a host material for yellow dopant (rubrene) in achieving high efficiency (eta(ext) 4.3% and eta(P) 8.7 lm/W at an electroluminance of 100 cd/m(2) or eta(ext) 3.9% and eta(P) 5.1 lm/W at an electroluminance of 1000 cd/m(2)) white electroluminescence (CIE(x,y) = 0.30, 0.35).

Spin blockade, orbital occupation, and charge ordering in La1.5Sr0.5CoO4

Using Co-L2,3 and O-K x-ray absorption spectroscopy, we reveal that the charge ordering in La1.5Sr0.5CoO4 involves high spin (S=3/2) Co2+ and low spin (S=0) Co3+ ions. This provides evidence for the spin-blockade phenomenon as a source for the extremely insulating nature of the La2-xSrxCoO4 series. The associated e{g}{2} and e{g}{0} orbital occupation accounts for the large contrast in the Co-O bond lengths and, in turn, the high charge ordering temperature. Yet, the low magnetic ordering temperature is naturally explained by the presence of the nonmagnetic (S=0) Co3+ ions. From the identification of the bands we infer that La1.5Sr0.5CoO4 is a narrow band material.

An Ultrahigh Resolution SPECT System for I-125 Mouse Brain Imaging Studies

This paper presents some initial experimental results obtained with a dual-head prototype single photon emission microscope system (SPEM) that is dedicated to mouse brain studies using I-125 labeled radiotracers. In particular, this system will be used for in vivo tacking of radiolabeled T cells in mouse brain. This system is based on the use of the intensified electron multiplying charge-coupled device (I-EMCCD) camera that offers the combination of an excellent intrinsic spatial resolution, a good signal-to-noise ratio, a large active area and a reasonable detection efficiency over an energy range between 27-140keV. In this study, the dual-head SPEM system was evaluated using both resolution phantoms and a mouse with locally injected T cells labelled with I-125. It was demonstrated that for a relatively concentrated source object, the current dual-head SPEM system is capable of visualizing the tiny amount of radioactivity (~12 nCi) carried by a very small number (<1000) of T cells. The current SPEM system design allows four or six camera heads to be installed in a stationary system configuration that offers a doubled or tripled sensitivity at a spatial resolution similar to that obtained with the dualhead system. This development would provide a powerful tool for in vivo and non-invasive tracking of radiolabeled T cells in mouse brain and potentially for other rodent brain imaging studies.

Thermally or magnetically induced polarization reversal in the Multiferroic CoCr2O4

We report the unexpected evolution, with thermal and magnetic-field (H) variations, of the interrelation between the polarization P, magnetization M, and spiral wave vector Q in CoCr2O4, which has a ferrimagnetic conical-spiral magnetic order. For example, P suddenly jumps and changes its sign at the magnetic lock-in transition (T_{L}) with thermal variation, or with isothermal variation of H (without changing its direction) at T_{L}, which surprisingly occurs without change in spiral handedness (i.e., the sign of Q). The presence of multiple spiral sublattices may be behind this unusual behavior.