Tridentate Copper Ligand Influences on Heme−Peroxo−Copper Formation and Properties: Reduced, Superoxo, and μ-Peroxo Iron/Copper Complexes

In cytochrome c oxidase synthetic modeling studies, we recently reported a new mu-eta2:eta2-peroxo binding mode in the heteronuclear heme/copper complex [(2L)Fe(III)-(O2(2-))-CuII]+ (6) which is effected by tridentate copper chelation (J. Am. Chem. Soc. 2004, 126, 12716). To establish fundamental coordination and O2-reactivity chemistry, we have studied and describe here (i) the structure and dioxygen reactivity of the copper-free compound (2L)FeII (1), (ii) detailed spectroscopic properties of 6 in comparisons with those of known mu-eta2:eta1 heme-peroxo-copper complexes, (iii) formation of 6 from the reactions of [(2L)FeIICuI]+ (3) and dioxygen by stopped-flow kinetics, and (iv) reactivities of 6 with CO and PPh3. In the absence of copper, 1 serves as a myoglobin model compound possessing a pyridine-bound five-coordinate iron(II)-porphyrinate which undergoes reversible dioxygen binding. Oxygenation of 3 below -60 degrees C generates the heme-peroxo-copper complex 6 with strong antiferromagnetic coupling between high-spin iron(III) and copper(II) to yield an S = 2 spin system. Stopped-flow kinetics in CH2Cl2/6% EtCN show that dioxygen reacts with iron(II) first to form a heme-superoxide moiety, [(EtCN)(2L)FeIII-(O2-)...CuI(EtCN)]+ (5), which further reacts with Cu(I) to generate 6. Compared to those properties of a known mu-eta2:eta1-heme-peroxo-copper complex, 6 has a significantly diminished resonance Raman nu(O-O) stretching frequency at 747 cm(-1) and distinctive visible absorptions at 485, 541, and 572 nm, all of which seem to be characteristics of a mu-eta2:eta2-heme-peroxo-copper system. Addition of CO or PPh3 to 6 yields a bis-CO adduct of 3 or a PPh(3) adduct of 5, the latter with a remaining FeIII-(O2-) moiety.

Hypervalent iodine-mediated vicinal syn diazidation: application to the total synthesis of (+/-)-dibromophakellstatin

[reaction: see text] The total synthesis of (+/-)-dibromophakellstatin is described. The molecule is constructed from a key syn-diazide, formed by a hypervalent iodine-mediated diazidation of a dihydrodipyrrolopyrazinone ring structure.

Rhodium boryl complexes in the catalytic, terminal functionalization of alkanes

A series of studies have been conducted by experimental and theoretical methods on the synthesis, structures, and reactions of CpRh boryl complexes that are likely intermediates in the rhodium-catalyzed regioselective, terminal functionalization of alkanes. The photochemical reaction of CpRh(eta(6)-C(6)Me(6)) with pinacolborane (HBpin) generates the bisboryl complex CpRh(H)(2)(Bpin)(2) (2), which reacts with neat HBpin to generate CpRh(H)(Bpin)(3) (3). X-ray diffraction, density functional theory (DFT) calculations, and NMR spectroscopy suggest a weak, but measurable, B-H bonding interaction. Both 2 and 3 dissociate HBpin and coordinate PEt(3) or P(p-Tol)(3) to generate the conventional rhodium(III) species CpRh(PEt(3))(H)(Bpin) (4) and CpRh[P(p-tol)(3)](Bpin)(2) (5). Compounds 2 and 3 also react with alkanes and arenes to form alkyl- and arylboronate esters at temperatures similar to or below those of the catalytic borylation of alkanes and arenes. Further, these compounds were observed directly in catalytic reactions. The enthalpies and free energies for generation of the 16-electron intermediate and for the C-H bond cleavage and B-C bond formation have been calculated with DFT. These results strongly suggest that the C-H bond cleavage process occurs by a metal-assisted sigma-bond metathesis mechanism to generate a borane complex that isomerizes if necessary to place the alkyl group cis to the boryl group. This complex with cis boryl and alkyl groups then undergoes B-C bond formation by a second sigma-bond metathesis to generate the final functionalized product.

Titanium(IV) Citrate Speciation and Structure under Environmentally and Biologically Relevant Conditions

The water-soluble complexes of Ti(IV) with citrate are of interest in environmental, biological, and materials chemistry. The aqueous solution speciation is revealed by spectropotentiometric titration. From pH 3-8, given at least three equivalents of ligand, 3:1 citrate/titanium complexes predominate in solution with successive deprotonation of dangling carboxylates as the pH increases. In this range and under these conditions, hydroxo- or oxo-metal species are not supported by the data. At ligand/metal ratios between 1:1 and 3:1, the data are difficult to fit, and are consistent with the formation of such hydroxo- or oxo- species. Stability constants for observed species are tabulated, featuring log beta-values of 9.18 for the 1:1 complex [Ti(Hcit)](+), and 16.99, 20.41, 16.11, and 4.07 for the 3:1 complexes [Ti(H(2)cit)(3)](2-), [Ti(H(2)cit)(Hcit)(2)](4-), [Ti(Hcit)(2)(cit)](6-), and [Ti(cit)(3)](8-), respectively (citric acid = H(4)cit). Optical spectra for the species are reported. The complexes exhibit similar yet distinct spectra, featuring putative citrate-to-Ti(IV) charge-transfer absorptions (lambda(max) approximately 250-310 nm with epsilon approximately 5000-7000 M(-)(1) cm(-1)). The prevailing 3:1 citrate/titanium ratio in solution is supported by electrospray mass spectrometry data. The X-ray crystal structure of a fully deprotonated tris-citrate complex Na(8)[Ti(C(6)H(4)O(7))(3)].17H(2)O (1) (or Na(8)[Ti(cit)(3)].17H(2)O) that crystallizes from aqueous solution at pH 7-8 is reported. Compound 1 crystallizes in the triclinic space group P, with a = 11.634(2) Angstroms, b = 13.223(3) Angstroms, c = 13.291(3) Angstroms, V = 1982.9(7) Angstroms(3), and Z = 2.

Binding Cooperativity of Two Different Lewis Acid Groups at the Edge of Ferrocene

The binding properties of heteronuclear bidentate Lewis acids, in which an organoboron and an organotin moiety are attached adjacent to each other at one of the Cp rings of ferrocene, have been studied. Treatment of [1,2-fc(SnMe2Cl)(BClMe)] (1-Cl) (fc = ferrocenediyl) with one equivalent of pyridine or 4-dimethylaminopyridine (DMAP) resulted in diastereoselective complexation of boron. Adducts 2 and 3 have been studied by multinuclear NMR, and the stereoselectivity of complexation was further confirmed by single crystal X-ray diffraction of 2. The importance of cooperative effects that involve an intramolecular B-ClSn interaction on the diastereoselectivity is evident from comparison with binding studies on the phenyl-substituted analogue [1,2-fc(SnMe2Cl)(BPhMe)] (1-Ph). Complexation of 1-Ph led to diastereomeric mixtures of adducts 4 and 5, respectively, which were identified by multinuclear NMR including NOESY experiments. The solid-state structure of one of the diastereomers of 5 was confirmed by X-ray crystallography. Facile isomerization was found in solution and the barrier of activation was determined by VT NMR studies (4: Delta(#)(298) = 54.9+/-0.4 kJ mol(-1); 5: Delta(#)(298) = 70.3+/-0.1 kJ mol(-1)). Competitive binding of pyridine to 1-Cl and [FcB(Cl)Me] (Fc = ferrocenyl) showed that cooperative effects between tin and boron lead to significant Lewis acidity enhancement. Binding of a second nucleophile in the presence of excess of base occurred also at boron. The novel zwitterionic complexes [1,2-fc(BMe(py)2)(SnMe2Cl2)] (6) and [1,2-fc(BMe(dmap)(2))(SnMe(2)Cl2)] (7) formed, which consist of boronium cation and stannate anion moieties. The structure of 7 in the solid-state was confirmed by X-ray crystallography. Multinuclear NMR data and competition experiments indicate weak binding of chloride to tin in 7 and partial dissociation in solution.

A Chromium Catalyst for the Polymerization of Ethylene as a Homogeneous Model for the Phillips Catalyst

A structurally characterized cationic chromium(III) alkyl featuring a bulky nacnac ligand catalyzes the polymerization of ethylene as well as the copolymerization of ethylene with alpha-olefins. This well-characterized homogeneous catalyst constitutes a structural as well as functional model of the widely used heterogeneous Phillips olefin polymerization catalyst.

Heme-copper/dioxygen adduct formation relevant to cytochrome c oxidase: spectroscopic characterization of [(6L)FeIII-(O2(2-))-CuII]+

In the further development and understanding of heme-copper dioxygen reactivity relevant to cytochrome c oxidase O(2)-reduction chemistry, we describe a high-spin, five-coordinate dioxygen (peroxo) adduct of an iron(II)-copper(I) complex, [((6)L)Fe(II)Cu(I)](BArF(20)) (1), where (6)L is a tetraarylporphyrinate with a tethered tris(2-pyridylmethyl)amine chelate for copper. Reaction of 1 with O(2) in MeCN affords a remarkably stable [t(1/2) (rt; MeCN) approximately 60 min] adduct, [((6)L)Fe(III)-(O(2) (2-))-Cu(II)](+) (2) [EPR silent; lambda(max)=418 (Soret), 561 nm], formulated as a peroxo complex based on manometry (1:O(2)=1:1; spectrophotometric titration, -40 degrees C, MeCN), mass spectrometry {MALDI-TOF-MS: (16)O(2), m/z 1191 ([((6)L)Fe(III)-((16)O(2) (2-))-Cu(II)](+)); (18)O(2), m/z 1195}, and resonance Raman spectroscopy (nu((O-O))=788 cm(-1); Delta(16)O(2)/(18)O(2)=44 cm(-1); Delta(16)O(2)/(16/18)O(2)=22 cm(-1)). (1)H and (2)H NMR spectroscopy (-40 degrees C, MeCN) reveals that 2 is the first heme-copper peroxo complex which is high-spin, with downfield-shifted pyrrole resonances (delta(pyrrole)=75 ppm, s, br) and upfield shifted peaks at delta= -22, -35, and -40 ppm, similar to the pattern observed for the mu-oxo complex [((6)L)Fe(III)-O-Cu(II)](BAr(F)) (3) (known S=2 system, antiferromagnetically coupled high-spin Fe(III) and Cu(II)). The corresponding magnetic moment measurement (Evans method, CD(3)CN, -40 degrees C) also confirms the S=2 spin state, with mu(B)=4.9. Structural insights were obtained from X-ray absorption spectroscopy, showing Fe-O (1.83 A) and Cu-O (1.882 A) bonds, and an Fe...Cu distance of 3.35(2) A, suggestive of a mu-1,2-peroxo ligand present in 2. The reaction of 2 with cobaltocene gives 3, differing from the observed full reduction seen with other heme-Cu peroxo complexes. Finally, thermal decomposition of 2 yields 3, with concomitant release of 0.5 mol O(2) per mol 2, as confirmed quantitatively by an alkaline pyrogallol dioxygen scavenging solution.

New Family of Lithium Salts for Highly Conductive Nonaqueous Electrolytes

New lithium salts of weakly coordinating anions were prepared by treating lithium imidazolates or LiN(CH3)2 with 2 equiv of BF(3). They are LiIm(BF3)2, Li 2-MeIm(BF3)2, Li 4-MeIm(BF3)2, LiBenzIm(BF3)2, Li 2-iPrIm(BF3)2, and LiN(CH3)2(BF3)2 (Im=imidazolate, Me=methyl, iPr=isopropyl, BenzIm=benzoimidazolate). The salts were characterized by NMR spectroscopy and mass spectrometry. The structure of LiBenzIm(BF3)2 consists of a dimeric centrosymmetric unit with each lithium atom forming a bridge between the two anions through one fluorine contact to each anion. The structure of a hydrate of LiN(CH3)2(BF3)2 consists of an infinite chain in which each anion chelates two different lithium atoms through Li-F bonds. The conductivities of electrolyte solutions of these salts were measured and are discussed in terms of different ion-pairing modes determined from the solid-state structures, the anion's ability to distribute charge, and solution viscosity. Organic carbonate solutions of LiIm(BF3)2 partially disproportionate at 85 degrees C forming LiBF4, LiBF2[Im(BF3)]2, and Li[(BF3)ImBF2ImBF2Im(BF3)], reaching equilibrium by 3 months at 85 degrees C but not disproportionating at room temperature after 9 months. A mechanism for the formation of these disproportionation products is proposed. The lower conductivity of the 1 M LiIm(BF3)2 solution that has undergone disproportionation is attributed to the formation LiBF4, which is less conductive, and LiBF2[Im(BF3)]2 and Li[(BF3)ImBF2ImBF2Im(BF3)], which increase solution viscosity.

Synthesis, molecular structures, and chemistry of some new palladium(II) and platinum(II) complexes with pentafluorophenyl ligands

A series of palladium(II) and platinum(II) complexes possessing pentafluorophenyl ligands of the general formula [M(L-L)(C6F5)Cl][space](M = Pd 3; L-L=tmeda (N,N,N',N',-tetramethylethylenediamine) a; 1,2-bis(2,6-dimethylphenylimino)ethane) b; dmpe (1,2-bis(dimethylphosphino)ethane) c; dcpe (1,2-bis(dicyclohexylphosphino)ethane) d; Pt ; L-L=tmeda a; 1,2-bis[3,5-bis(trifluoromethyl)phenylimino]-1,2-dimethylethane b; dmpe c; dcpe d) were readily synthesized from the dimer [M(C6F5)(tht)(mu-Cl)2] (M=Pd 1b, Pt 2b; tht=tetrahydrothiophene) and the corresponding bidentate ligand. In the case of palladium, the corresponding iodo analogues (6a-c) were readily synthesized in a one-pot reaction from [Pd2(dba)3], iodopentafluorobenzene, and the appropriate ligand. The platinum complexes 4c-d were then converted to the water complexes [Pt(L-L)(C6F5)(OH2)]OTf (L-L =dmpe 7a; dcpe 7b)via reaction with AgOTf in the presence of water. Attempts to convert the palladium complexes 3c-d to the corresponding water complexes resulted in the disproportionation of the intermediate water complex to form [Pd(L-L)(C6F5)2] (L-L=dmpe 8) or [Pd(L-L)2][OTf]2(L-L=dcpe 9). Upon standing in solution for prolonged periods, complex 7a undergoes an identical disproportionation reaction to the Pd analogues to form [Pt(L-L)(C6F5)2] (L-L=dmpe 10). Complexes 4c and 4d were converted to the corresponding hydrides (11b-c, respectively) using two different hydride sources: 11a was formed by the reaction of with NaBH4 in refluxing THF, while 11b was synthesized in near quantitative yield using [Cp2ZrH2] in refluxing THF. Attempts to synthesize eta2-tetrafluorobenzyne complexes [Pt(L-L)(C6F4)] (L-L=dmpe, dcpe) from reaction of 11a-b with butyllithium were unsuccessful. The molecular structures of 3a,4a, 4c, 4d, 6b, 7a, 8, 11b and have been determined by X-ray crystallographic studies, and are discussed.

Mononuclear, Five-Coordinate Lanthanide Amido and Aryloxide Complexes Bearing Tetradentate (N2O2) Schiff Bases

Two monomeric, five-coordinate lanthanide complexes, [bis-5,5'-(1,3-propanediyldiimino)-2,2-dimethyl-4-hexene-3-onato]samarium[2,6-bis(tert-butyl)-4-methylphenoxide] and [bis-5,5'-(1,3-propanediyldiimino)-2,2-dimethyl-4-hexene-3-onato]erbium[2,6-bis(tert-butyl)-4-methylphenoxide], were isolated from the reactions of 2,6-bis(tert-butyl)-4-methylphenol with [bis-5,5'-(1,3-propanediyldiimino)-2,2-dimethyl-4-hexene-3-onato]lanthanide[bis(trimethylsilyl)amido] (lanthanide = Er(3+) and Sm(3+)). The purified phenoxides were recovered in excellent yields and analytical purity, and the reactions proceeded cleanly without Schiff-base degradation or cluster formation. Analogously, [bis-3,3'-(1,3-propanediyldiimino)-1-phenyl-2-butene-1-onato]erbium[bis(trimethylsilyl)amido] was also directly converted to [bis-3,3'-(1,3-propanediyldiimino)-1-phenyl-2-butene-1-onato]erbium[2,6-bis(tert-butyl)-4-methylphenoxide]; however, a less sterically demanding alcohol (i.e., ethanol) yielded a neutral trinuclear oxo alkoxide species with each dianionic Schiff base asymmetrically bridging through micro-oxo interactions. In this polynuclear cluster, each symmetry-related, seven-coordinate erbium(III) ion exhibits monocapped trigonal prismatic geometry, which assembles by sharing triangular capped faces. Single-crystal X-ray diffraction revealed square-pyramidal metal coordination in each five-coordinate lanthanide ion with varied S(4) ruffling of the "square base" donor atoms and the six-membered propylene diamine chelate ring adopting the boat conformation. To contrast the effect of subtle ligand changes, we also report the synthesis and characterization of [bis-5,5'-(2,2-dimethyl-1,3-propanediyldiimino)-2,2-dimethyl-4-hexene-3-onato]samarium[bis(trimethylsilyl)amido], having gem-dimethyl substituents appended to the propylene bridge central carbon. The six-membered diamine chelate ring in this compound adopts the chair conformation without metal-hydrocarbon interaction. Also presented are qualitative activity observations and polymerization data for the polymerization of rac-lactide and epsilon-caprolactone using the five-coordinate lanthanide amidos and phenoxides.

Mono-, Bi-, and Trinuclear CuII-Cl Containing Products Based on the Tris(2-pyridylmethyl)amine Chelate Derived from Copper(I) Complex Dechlorination Reactions of Chloroform

The ligand TMPA (tris(2-pyridylmethyl)amine) and its copper complexes have played a prominent role in recent (bio)inorganic chemistry studies; the copper(I) complex [CuI(TMPA)(CH3CN)]+ possesses an extensive dioxygen reactivity, and it is also known to effect the reductive dechlorination of substrates such as dichloromethane and benzyl and allyl chlorides. In this report, we describe a set of new analogues of TMPA, ligand 6TMPAOH, binucleating Iso-DO, and trinucleating SYMM. Copper(I) complexes with these ligands and a previously described binucleating ligand DO react with chloroform, resulting in reductive dechlorination and production of [CuIIx(L)Clx]x+ (x = 1, 2, or 3). X-ray crystal structures of [CuII(6TMPAOH)Cl]PF6, [CuII2(Iso-DO)Cl2](PF6)2, [CuII2(DO)Cl2](PF6)2, and [Cu3(SYMM)Cl3](PF6)3 are presented, and the compounds are also characterized by UV-vis and EPR spectroscopies as well as cyclic voltammetry. The steric influence of a pyridyl 6-substituent (in the complexes with 6TMPAOH, Iso-DO, and SYMM) on the solid state and solution structures and redox potentials are compared and contrasted to those chlorocopper(II) complexes with a pyridyl 5'-substituent (in [CuII2(DO)Cl2](PF6)2 and in [CuII(TMPA)Cl]+). Some insights into the reductive dechlorination process have been obtained by using 2H NMR spectroscopy in following the reaction of [Cu2(Iso-DO)(CH3CN)2](PF6)2 with CDCl3, in the presence or absence of a radical trap, 2,4-di-tert-butylphenol.

Synthesis, structure, theoretical studies, and Ligand exchange reactions of monomeric, T-shaped arylpalladium(II) halide complexes with an additional, weak agostic interaction

A series of monomeric arylpalladium(II) complexes LPd(Ph)X (L = 1-AdPtBu2, PtBu3, or Ph5FcPtBu2 (Q-phos); X = Br, I, OTf) containing a single phosphine ligand have been prepared. Oxidative addition of aryl bromide or aryl iodide to bis-ligated palladium(0) complexes of bulky, trialkylphosphines or to Pd(dba)2 (dba = dibenzylidene acetone) in the presence of 1 equiv of phosphine produced the corresponding arylpalladium(II) complexes in good yields. In contrast, oxidative addition of phenyl chloride to the bis-ligated palladium(0) complexes did not produce arylpalladium(II) complexes. The oxidative addition of phenyl triflate to PdL2 (L = 1-AdPtBu2, PtBu3, or Q-phos) also did not form arylpalladium(II) complexes. The reaction of silver triflate with (1-AdPtBu2)Pd(Ph)Br furnished the corresponding arylpalladium(II) triflate in good yield. The oxidative addition of phenyl bromide and iodide to Pd(Q-phos)2 was faster than oxidative addition to Pd(1-AdPtBu2)2 or Pd(PtBu3)2. Several of the arylpalladium complexes were characterized by X-ray diffraction. All of the arylpalladium(II) complexes are T-shaped monomers. The phenyl ligand, which has the largest trans influence, is located trans to the open coordination site. The complexes appear to be stabilized by a weak agostic interaction of the metal with a ligand C-H bond positioned at the fourth-coordination site of the palladium center. The strength of the Pd.H bond, as assessed by tools of density functional theory, depended upon the donating properties of the ancillary ligands on palladium.

Cobalt tris(mercaptoimidazolyl)borate complexes: synthetic studies and the structure of the first cobaltaboratrane

The paramagnetic complexes (TmtBu)CoX (X = Cl, Br, I) have been readily prepared and structurally characterized and provide a convenient entry into cobalt(II) tris(mercaptoimidazolyl)borate chemistry. A number of derivatives, including mononuclear triphenylphosphine adducts [(TmtBu)Co(PPh3)]X and dinuclear compounds [Co2(TmtBu)2X]Y, have been prepared in order to ascertain whether cobalt is a reliable surrogate for zinc in biological systems, particularly in sulfur-rich coordination environments. The structure of the first cobaltaboratrane is also reported.

Design of a Synthetic Foldamer that Modifies the Growth of Calcite Crystals

An oligopyridine foldamer, whose structure is dictated by bifurcated hydrogen bonds, was designed to recognize the surface of calcite through three carboxylates, projected from one face of the molecule. At low concentrations of the trimer, elongated calcite crystals with angular, teeth-like growths, identified as {0l} faces, were exclusively formed. In the presence of a related monomer, only calcite rhombohedra are formed, indicating that it is the ordered array of carboxylates that causes the morphological changes, via a specific interaction between the foldamer and the newly expressed faces of the growing calcite crystals.

Gold(I) Phosphido Complexes: Synthesis, Structure, and Reactivity

Deprotonation of the phosphine complexes Au(PHR(2))Cl with aqueous ammonia gave the gold(I) phosphido complexes [Au(PR(2))](n)() (PR(2) = PMes(2) (1), PCy(2) (2), P(t-Bu)(2) (3), PIs(2) (4), PPhMes (5), PHMes (6); Mes = 2,4,6-Me(3)C(6)H(2), Is = 2,4,6-(i-Pr)(3)C(6)H(2), Mes = 2,4,6-(t-Bu)(3)C(6)H(2), Cy = cyclo-C(6)H(11)). (31)P NMR spectroscopy showed that these complexes exist in solution as mixtures, presumably oligomeric rings of different sizes. X-ray crystallographic structure determinations on single oligomers of 1-4 revealed rings of varying size (n = 4, 6, 6, and 3, respectively) and conformation. Reactions of 1-3 and 5 with PPN[AuCl(2)] gave PPN[(AuCl)(2)(micro-PR(2))] (9-12, PPN = (PPh(3))(2)N(+)). Treatment of 3 with the reagents HI, I(2), ArSH, LiP(t-Bu)(2), and [PH(2)(t-Bu)(2)]BF(4) gave respectively Au(PH(t-Bu)(2))(I) (14), Au(PI(t-Bu)(2))(I) (15), Au(PH(t-Bu)(2))(SAr) (16, Ar = p-t-BuC(6)H(4)), Li[Au(P(t-Bu)(2))(2)] (17), and [Au(PH(t-Bu)(2))(2)]BF(4) (19).

Terphenyl Cyclooctatetraenyl Compounds of Samarium

The syntheses and molecular structures of a number of terphenyl-based compounds of the lanthanide element samarium are reported. Reaction of 2 equiv of DppLi (Dpp = 2,6-diphenylphenyl) with 1 equiv of SmCl(3) in tetrahydrofuran at room temperature yields (Dpp)(2)SmCl(micro-Cl)Li(THF)(3) (1). The one-pot reaction of 1 equiv of K(2)COT (COT(2)(-) = cyclooctatetraenyl dianion) with 1 equiv SmCl(3) in tetrahydrofuran at room temperature followed by addition of 1 equiv of terphenyllithium salt DppLi, DmpLi (Dmp = 2,6-dimesitylphenyl), or DanipLi (Danip = 2,6-di(o-anisol)phenyl) produces DppSmCOT(micro-Cl)Li(THF)(3) (2), DmpSm(THF)COT (3), and DanipSm(THF)COT (4), respectively. In the case of the Danip-based compound 4 the order of addition of reagents can be reversed producing the same compound, however, in considerably lower yield. Compound 2 can also be prepared by reaction of 1 with 1 equiv of K(2)COT in tetrahydrofuran. The molecular structure of the bis(terphenyl) compound 1 exhibits a formally four-coordinate metal atom. The molecular structures of the terphenyl COT compounds 2-4 feature monomeric complexes which are obtained either as a lithium chloride adduct (2) or as tetrahydrofuran adducts (3, 4). In 4 the Danip ligand adopts the meso form.