Molecularly engineered hole-transport material for low-cost perovskite solar cells

Triphenylamine-N-phenyl-4-(phenyldiazenyl)aniline (TPA-AZO) is synthesized via a facile CuI-catalyzed reaction and used as a hole transport material (HTM) in perovskite solar cells (PSCs), as an alternative to the expensive spiro-type molecular materials, including commercial 2,2',7,7'-tetrakis[N,N-di(4-methoxyphenyl)amino]-9,9'-spirobifluorene (spiro-OMeTAD). Experimental and computational investigations reveal that the highest occupied molecular orbital (HOMO) level of TPA-AZO is deeper than that of spiro-OMeTAD, and optimally matches with the conduction band of the perovskite light absorber. The use of TPA-AZO as a HTM results in PSC prototypes with a power conversion efficiency (PCE) approaching that of the spiro-OMeTAD-based reference device (17.86% vs. 19.07%). Moreover, the use of inexpensive starting reagents for the synthesis of TPA-AZO makes the latter a new affordable HTM for PSCs. In particular, the cost of 1 g of TPA-AZO ($22.76) is significantly lower compared to that of spiro-OMeTAD ($170-475). Overall, TPA-AZO-based HTMs are promising candidates for the implementation of viable PSCs in large-scale production.

Extending the Colloidal Transition Metal Dichalcogenide Library to ReS2 Nanosheets for Application in Gas Sensing and Electrocatalysis

Among the large family of transition metal dichalcogenides, recently ReS₂ has stood out due to its nearly layer-independent optoelectronic and physicochemical properties related to its 1T distorted octahedral structure. This structure leads to strong in-plane anisotropy, and the presence of active sites at its surface makes ReS₂ interesting for gas sensing and catalysts applications. However, current fabrication methods use chemical or physical vapor deposition (CVD or PVD) processes that are costly, time-consuming and complex, therefore limiting its large-scale production and exploitation. To address this issue, a colloidal synthesis approach is developed, which allows the production of ReS₂ at temperatures below 360 °C and with reaction times shorter than 2h. By combining the solution-based synthesis with surface functionalization strategies, the feasibility of colloidal ReS₂ nanosheet films for sensing different gases is demonstrated with highly competitive performance in comparison with devices built with CVD-grown ReS₂ and MoS₂ . In addition, the integration of the ReS₂ nanosheet films in assemblies together with carbon nanotubes allows to fabricate electrodes for electrocatalysis for H₂ production in both acid and alkaline conditions. Results from proof-of-principle devices show an electrocatalytic overpotential competitive with devices based on ReS₂ produced by CVD, and even with MoS₂ , WS₂ , and MoSe₂ electrocatalysts.

Energy storage: The future enabled by nanomaterials

Lithium-ion batteries, which power portable electronics, electric vehicles, and stationary storage, have been recognized with the 2019 Nobel Prize in chemistry. The development of nanomaterials and their related processing into electrodes and devices can improve the performance and/or development of the existing energy storage systems. We provide a perspective on recent progress in the application of nanomaterials in energy storage devices, such as supercapacitors and batteries. The versatility of nanomaterials can lead to power sources for portable, flexible, foldable, and distributable electronics; electric transportation; and grid-scale storage, as well as integration in living environments and biomedical systems. To overcome limitations of nanomaterials related to high reactivity and chemical instability caused by their high surface area, nanoparticles with different functionalities should be combined in smart architectures on nano- and microscales. The integration of nanomaterials into functional architectures and devices requires the development of advanced manufacturing approaches. We discuss successful strategies and outline a roadmap for the exploitation of nanomaterials for enabling future energy storage applications, such as powering distributed sensor networks and flexible and wearable electronics.

Zermelo's problem: Optimal point-to-point navigation in 2D turbulent flows using reinforcement learning

To find the path that minimizes the time to navigate between two given points in a fluid flow is known as Zermelo's problem. Here, we investigate it by using a Reinforcement Learning (RL) approach for the case of a vessel that has a slip velocity with fixed intensity, V_s, but variable direction and navigating in a 2D turbulent sea. We show that an Actor-Critic RL algorithm is able to find quasioptimal solutions for both time-independent and chaotically evolving flow configurations. For the frozen case, we also compared the results with strategies obtained analytically from continuous Optimal Navigation (ON) protocols. We show that for our application, ON solutions are unstable for the typical duration of the navigation process and are, therefore, not useful in practice. On the other hand, RL solutions are much more robust with respect to small changes in the initial conditions and to external noise, even when V_s is much smaller than the maximum flow velocity. Furthermore, we show how the RL approach is able to take advantage of the flow properties in order to reach the target, especially when the steering speed is small.

Flexible Graphene/Carbon Nanotube Electrochemical Double-Layer Capacitors with Ultrahigh Areal Performance

The fabrication of electrochemical double-layer capacitors (EDLCs) with high areal capacitance relies on the use of elevated mass loadings of highly porous active materials. Herein, we demonstrate a high-throughput manufacturing of graphene/carbon nanotubes hybrid EDLCs. The wet-jet milling (WJM) method is exploited to exfoliate the graphite into single-few-layer graphene flakes (WJM-G) in industrial volumes (production rate ca. 0.5 kg/day). Commercial single-/double-walled carbon nanotubes (SDWCNTs) are mixed with graphene flakes in order to act as spacers between the flakes during their film formation. The WJM-G/SDWCNTs films are obtained by one-step vacuum filtration of the material dispersions, resulting in self-standing, metal- and binder-free flexible EDLC electrodes with high active material mass loadings up to around 30 mg cm^-2 . The corresponding symmetric WJM-G/SDWCNTs EDLCs exhibit electrode energy densities of 539 μWh cm^-2 at 1.3 mW cm^-2 and operating power densities up to 532 mW cm^-2 (outperforming most of the reported EDLC technologies). The EDCLs show excellent cycling stability and outstanding flexibility even in highly folded states (up to 180°).

Curvature dynamics and long-range effects on fluid-fluid interfaces with colloids

We investigate the dynamics of a phase-separating binary fluid, containing colloidal dumbbells anchored to the fluid-fluid interface. Extensive lattice Boltzmann-immersed boundary method simulations reveal that the presence of soft dumbbells can significantly affect the curvature dynamics of the interface between phase-separating fluids, even though the coarsening dynamics is left nearly unchanged. In addition, our results show that the curvature dynamics exhibits distinct non-local effects, which might be exploited for the design of new soft mesoscale materials. We point out that the inspection of the statistical dynamics of the curvature can disclose new insights into local inhomogeneities of the binary fluid configuration, as a function of the volume fraction and aspect ratio of the dumbbells.

Electrically Conducting and Mechanically Strong Graphene-Polylactic Acid Composites for 3D Printing

The advent of 3D printing has had a disruptive impact in manufacturing and can potentially revolutionize industrial fields. Thermoplastic materials printable into complex structures are widely employed for 3D printing. Polylactic acid (PLA) is among the most promising polymers used for 3D printing, owing to its low cost, biodegradability, and nontoxicity. However, PLA is electrically insulating and mechanically weak; this limits its use in a variety of 3D printing applications. This study demonstrates a straightforward and environment-friendly method to fabricate conductive and mechanically reinforced PLA composites by incorporating graphene nanoplatelets (GNPs). To fully utilize the superior electrical and mechanical properties of graphene, liquid-exfoliated GNPs are dispersed in isopropyl alcohol without the addition of any surfactant and combined with PLA dissolved in chloroform. The GNP-PLA composites exhibit improved mechanical properties (improvement in tensile strength by 44% and maximum strain by 57%) even at a low GNP threshold concentration of 2 wt %. The GNP-PLA composites also exhibit an electrical conductivity of over 1 mS/cm at >1.2 wt %. The GNP-PLA composites can be 3D-printed into various features with electrical conductivity and mechanical flexibility. This work presents a new direction toward advanced 3D printing technology by providing higher flexibility in designing multifunctional 3D printed features.

Carbon Nanotube-Supported MoSe2 Holey Flake:Mo2C Ball Hybrids for Bifunctional pH-Universal Water Splitting

The design of cost-effective and efficient electrocatalysts for both hydrogen evolution reaction (HER) and oxygen evolution reaction (OER) is pivotal for the molecular hydrogen (H₂) production from electrochemical water splitting as a future energy source. Herein, we show that the hybridization between multiple HER- and OER-active components is effective for the design and realization of bifunctional electrocatalysts for universal water splitting, i.e., in both acidic and alkaline media. Our strategy relies on the production and characterization of MoSe₂ holey flake:Mo₂C ball hybrids supported by single-walled carbon nanotube (SWCNT) electrocatalysts. Flakes of MoSe₂ are produced through hydrogen peroxide (H₂O₂)-aided liquid phase exfoliation (LPE), which promotes both the exfoliation of the materials and the formation of nanopores in the flakes via chemical etching. The amount of H₂O₂ in the solvent used for the exfoliation process is optimized to obtain ideal high ratio between edge and basal sites ratio, i.e., high-number of electrocatalytic sites. The hybridization of MoSe₂ flakes with commercial ball-like shaped Mo₂C crystals facilitates the Volmer reaction, which works in both acidic and alkaline media. In addition, the electrochemical coupling between SWCNTs (as support) and MoSe₂:Mo₂C hybrids synergistically enhances both HER- and OER-activity of the native components, reaching high η₁₀ in acidic and alkaline media (0.049 and 0.089 V for HER in 0.5 M H₂SO₄ and 1 M KOH, respectively; 0.197 and 0.241 V for OER in 0.5 M H₂SO₄ and 1 M KOH, respectively). The exploitation of the synergistic effects occurring between multicomponent electrocatalysts, coupled with the production of the electrocatalysts themselves through scalable and cost-effective solution-processed manufacturing techniques, is promising to scale-up the production of H₂ via efficient water splitting for the future energy portfolio.

Nonvolatile Memories Based on Graphene and Related 2D Materials

The pervasiveness of information technologies is generating an impressive amount of data, which need to be accessed very quickly. Nonvolatile memories (NVMs) are making inroads into high-capacity storage to replace hard disk drives, fuelling the expansion of the global storage memory market. As silicon-based flash memories are approaching their fundamental limit, vertical stacking of multiple memory cell layers, innovative device concepts, and novel materials are being investigated. In this context, emerging 2D materials, such as graphene, transition metal dichalcogenides, and black phosphorous, offer a host of physical and chemical properties, which could both improve existing memory technologies and enable the next generation of low-cost, flexible, and wearable storage devices. Herein, an overview of graphene and related 2D materials (GRMs) in different types of NVM cells is provided, including resistive random-access, flash, magnetic and phase-change memories. The physical and chemical mechanisms underlying the switching of GRM-based memory devices studied in the last decade are discussed. Although at this stage most of the proof-of-concept devices investigated do not compete with state-of-the-art devices, a number of promising technological advancements have emerged. Here, the most relevant material properties and device structures are analyzed, emphasizing opportunities and challenges toward the realization of practical NVM devices.

Carbon-Based Photocathode Materials for Solar Hydrogen Production

Hydrogen is considered a promising environmentally friendly energy carrier for replacing traditional fossil fuels. In this context, photoelectrochemical cells effectively convert solar energy directly to H₂ fuel by water photoelectrolysis, thereby monolitically combining the functions of both light harvesting and electrolysis. In such devices, photocathodes and photoanodes carry out the hydrogen evolution reaction (HER) and the oxygen evolution reaction (OER), respectively. Here, the focus is on photocathodes for HER, traditionally based on metal oxides, III-V group and II-VI group semiconductors, silicon, and copper-based chalcogenides as photoactive material. Recently, carbon-based materials have emerged as reliable alternatives to the aforementioned materials. A perspective on carbon-based photocathodes is provided here, critically analyzing recent research progress and outlining the major guidelines for the development of efficient and stable photocathode architectures. In particular, the functional role of charge-selective and protective layers, which enhance both the efficiency and the durability of the photocathodes, is discussed. An in-depth evaluation of the state-of-the-art fabrication of photocathodes through scalable, high-troughput, cost-effective methods is presented. The major aspects on the development of light-trapping nanostructured architectures are also addressed. Finally, the key challenges on future research directions in terms of potential performance and manufacturability of photocathodes are analyzed.

Graphene-Induced Improvements of Perovskite Solar Cell Stability: Effects on Hot-Carriers

Hot-carriers, that is, charge carriers with an effective temperature higher than that of the lattice, may contribute to the high power conversion efficiency (PCE) shown by perovskite-based solar cells (PSCs), which are now competitive with silicon solar cells. Hot-carriers lose their excess energy in very short times, typically in a few picoseconds after excitation. For this reason, the carrier dynamics occurring on this time scale are extremely important in determining the participation of hot-carriers in the photovoltaic process. However, the stability of PSCs over time still remains an issue that calls for a solution. In this work, we demonstrate that the insertion of graphene flakes into the mesoscopic TiO₂ scaffold leads to stable values of carrier temperature. In PSCs aged over 1 week, we indeed observe that in the graphene-free perovskite cells the carrier temperature decreases by about 500 K from 1800 to 1300 K, while the graphene-containing cell shows a reduction of less than 200 K after the same aging time delay. The stability of the carrier temperature reflects the stability of the perovskite nanocrystals embedded in the mesoporous graphene-TiO₂ layer. Our results, based on femtosecond transient absorption measurements, show that the insertion of graphene can be beneficial for the design of stable PSCs with the aim of exploiting the hot-carrier contribution to the PCE of the PSCs.

Polypyridyl ligands as a versatile platform for solid-state light-emitting devices

A comprehensive review of tuneable polypyridine complexes as the emissive components of OLED and LEC devices is presented, with a view to bridging the gap between molecular design and commercialization.

MoS2 Quantum Dot/Graphene Hybrids for Advanced Interface Engineering of a CH3NH3PbI3 Perovskite Solar Cell with an Efficiency of over 20

Interface engineering of organic-inorganic halide perovskite solar cells (PSCs) plays a pivotal role in achieving high power conversion efficiency (PCE). In fact, the perovskite photoactive layer needs to work synergistically with the other functional components of the cell, such as charge transporting/active buffer layers and electrodes. In this context, graphene and related two-dimensional materials (GRMs) are promising candidates to tune "on demand" the interface properties of PSCs. In this work, we fully exploit the potential of GRMs by controlling the optoelectronic properties of molybdenum disulfide (MoS₂) and reduced graphene oxide (RGO) hybrids both as hole transport layer (HTL) and active buffer layer (ABL) in mesoscopic methylammonium lead iodide (CH₃NH₃PbI₃) perovskite (MAPbI₃)-based PSCs. We show that zero-dimensional MoS₂ quantum dots (MoS₂ QDs), derived by liquid phase exfoliated MoS₂ flakes, provide both hole-extraction and electron-blocking properties. In fact, on one hand, intrinsic n-type doping-induced intraband gap states effectively extract the holes through an electron injection mechanism. On the other hand, quantum confinement effects increase the optical band gap of MoS₂ (from 1.4 eV for the flakes to >3.2 eV for QDs), raising the minimum energy of its conduction band (from -4.3 eV for the flakes to -2.2 eV for QDs) above the one of the conduction band of MAPbI₃ (between -3.7 and -4 eV) and hindering electron collection. The van der Waals hybridization of MoS₂ QDs with functionalized reduced graphene oxide (f-RGO), obtained by chemical silanization-induced linkage between RGO and (3-mercaptopropyl)trimethoxysilane, is effective to homogenize the deposition of HTLs or ABLs onto the perovskite film, since the two-dimensional nature of RGO effectively plugs the pinholes of the MoS₂ QD films. Our "graphene interface engineering" (GIE) strategy based on van der Waals MoS₂ QD/graphene hybrids enables MAPbI₃-based PSCs to achieve a PCE up to 20.12% (average PCE of 18.8%). The possibility to combine quantum and chemical effects into GIE, coupled with the recent success of graphene and GRMs as interfacial layer, represents a promising approach for the development of next-generation PSCs.

WS2-Graphite Dual-Ion Batteries

A novel WS₂-graphite dual-ion battery (DIB) is developed by combining a conventional graphite cathode and a high-capacity few-layer WS₂-flake anode. The WS₂ flakes are produced by exploiting wet-jet milling (WJM) exfoliation, which allows large-scale and free-material loss production (i.e., volume up to 8 L h^-1 at concentration of 10 g L^-1 and exfoliation yield of 100%) of few-layer WS₂ flakes in dispersion. The WS₂ anodes enable DIBs, based on hexafluorophosphate (PF₆^-) and lithium (Li⁺) ions, to achieve charge-specific capacities of 457, 438, 421, 403, 295, and 169 mAh g^-1 at current rates of 0.1, 0.2, 0.3, 0.4, 0.8, and 1.0 A g^-1, respectively, outperforming conventional DIBs. The WS₂-based DIBs operate in the 0 to 4 V cell voltage range, thus extending the operating voltage window of conventional WS₂-based Li-ion batteries (LIBs). These results demonstrate a new route toward the exploitation of WS₂, and possibly other transition-metal dichalcogenides, for the development of next-generation energy-storage devices.

Biotransformation and Biological Interaction of Graphene and Graphene Oxide during Simulated Oral Ingestion

The biotransformation and biological impact of few layer graphene (FLG) and graphene oxide (GO) are studied, following ingestion as exposure route. An in vitro digestion assay based on a standardized operating procedure (SOP) is exploited. The assay simulates the human ingestion of nanomaterials during their dynamic passage through the different environments of the gastrointestinal tract (salivary, gastric, intestinal). Physical-chemical changes of FLG and GO during digestion are assessed by Raman spectroscopy. Moreover, the effect of chronic exposure to digested nanomaterials on integrity and functionality of an in vitro model of intestinal barrier is also determined according to a second SOP. These results show a modulation of the aggregation state of FLG and GO nanoflakes after experiencing the complex environments of the different digestive compartments. In particular, chemical doping effects are observed due to FLG and GO interaction with digestive juice components. No structural changes/degradation of the nanomaterials are detected, suggesting that they are biopersistent when administered by oral route. Chronic exposure to digested graphene does not affect intestinal barrier integrity and is not associated with inflammation and cytotoxicity, though possible long-term adverse effects cannot be ruled out.

Liquid-Phase Exfoliated Indium-Selenide Flakes and Their Application in Hydrogen Evolution Reaction

Single- and few-layered InSe flakes are produced by the liquid-phase exfoliation of β-InSe single crystals in 2-propanol, obtaining stable dispersions with a concentration as high as 0.11 g L^-1 . Ultracentrifugation is used to tune the morphology, i.e., the lateral size and thickness of the as-produced InSe flakes. It is demonstrated that the obtained InSe flakes have maximum lateral sizes ranging from 30 nm to a few micrometers, and thicknesses ranging from 1 to 20 nm, with a maximum population centered at ≈5 nm, corresponding to 4 Se-In-In-Se quaternary layers. It is also shown that no formation of further InSe-based compounds (such as In₂ Se₃ ) or oxides occurs during the exfoliation process. The potential of these exfoliated-InSe few-layer flakes as a catalyst for the hydrogen evolution reaction (HER) is tested in hybrid single-walled carbon nanotubes/InSe heterostructures. The dependence of the InSe flakes' morphologies, i.e., surface area and thickness, on the HER performances is highlighted, achieving the best efficiencies with small flakes offering predominant edge effects. The theoretical model unveils the origin of the catalytic efficiency of InSe flakes, and correlates the catalytic activity to the Se vacancies at the edge of the flakes.

Publisher Correction: Quantum engineering of transistors based on 2D materials heterostructures

In the version of this Perspective originally published, in the email address for the author Giuseppe Iannaccone, the surname was incorrectly given as "innaconne"; this has now been corrected in all versions of the Perspective. Also, an error in the production process led to Figs. 1, 2 and 3 being of low resolution; these have now been replaced with higher-quality versions.

A ruthenium tetrazole complex-based high efficiency near infrared light electrochemical cell

We report on the exploitation of a new tetrazole-substituted 1,10-phenanthroline and a 2,2'-bipyridine (bpy) ancillary ligand modified with an electron-donating group in cationic ruthenium complexes. This complex, placed in between two electrodes without any polymer, demonstrates high efficiency near-infrared (NIR) electroluminescence (EL). The comparison between bpy and its methyl-substituted ancillary ligand shows that the cationic Ru tetrazolate complex containing methyl groups exhibits a red shift in the EL wavelength from 620 to 800 nm compared to [Ru(bpy)₃]²⁺ and an almost twofold reduction in the turn-on voltage, i.e., from 5 to 3 V, with respect to 5-tetrazole-1,10-phenanthroline. An external quantum efficiency of 0.95% for the dimethyl derivative is demonstrated, which is a remarkable result for non-doped NIR light electrochemical cells based on ruthenium polypyridyl.

Quantum engineering of transistors based on 2D materials heterostructures

Quantum engineering entails atom-by-atom design and fabrication of electronic devices. This innovative technology that unifies materials science and device engineering has been fostered by the recent progress in the fabrication of vertical and lateral heterostructures of two-dimensional materials and by the assessment of the technology potential via computational nanotechnology. But how close are we to the possibility of the practical realization of next-generation atomically thin transistors? In this Perspective, we analyse the outlook and the challenges of quantum-engineered transistors using heterostructures of two-dimensional materials against the benchmark of silicon technology and its foreseeable evolution in terms of potential performance and manufacturability. Transistors based on lateral heterostructures emerge as the most promising option from a performance point of view, even if heterostructure formation and control are in the initial technology development stage.

Ultralow friction of ink-jet printed graphene flakes

We report the frictional response of few-layer graphene (FLG) flakes obtained by the liquid phase exfoliation (LPE) of pristine graphite. To this end, we inkjet print FLG on bare and hexamethyldisilazane-terminated SiO₂ substrates, producing micrometric patterns with nanoscopic roughness that are investigated by atomic force microscopy. Normal force spectroscopy and atomically-resolved morphologies indicate reduced surface contamination by solvents after a vacuum annealing process. Notably, the printed FLG flakes show ultralow friction comparable to that of micromechanically exfoliated graphene flakes. Lubricity is retained on flakes with a lateral size of a few tens of nanometres, and with a thickness as small as ∼2 nm, confirming the high crystalline quality and low defects density in the FLG basal plane. Surface exposed step edges exhibit the highest friction values, representing the preferential sites for the origin of the secondary dissipative processes related to edge straining, wear or lateral displacement of the flakes. Our work demonstrates that LPE enables fundamental studies on graphene friction to the single-flake level. The capability to deliver ultralow-friction-graphene over technologically relevant substrates, using a scalable production route and a high-throughput, large-area printing technique, may also open up new opportunities in the lubrication of micro- and nano-electromechanical systems.

Size-Tuning of WSe2 Flakes for High Efficiency Inverted Organic Solar Cells

The development of large-scale production methods of two-dimensional (2D) crystals, with on-demand control of the area and thickness, is mandatory to fulfill the potential applications of such materials for photovoltaics. Inverted bulk heterojunction (BHJ) organic solar cell (OSC), which exploits a polymer-fullerene binary blend as the active material, is one potentially important application area for 2D crystals. A large ongoing effort is indeed currently devoted to the introduction of 2D crystals in the binary blend to improve the charge transport properties. While it is expected that the nanoscale domains size of the different components of the blend will significantly impact the performance of the OSC, to date, there is no evidence of quantitative information on the interplay between 2D crystals and fullerene domains size. Here, we demonstrate that by matching the size of WSe₂ few-layer 2D crystals, produced by liquid-phase exfoliation, with that of the PC₇₁BM fullerene domain in BHJ OSCs, we obtain power conversion efficiencies (PCEs) of ∼9.3%, reaching a 15% improvement with respect to standard binary devices (PCE = 8.10%), i.e., without the addition of WSe₂ flakes. This is the highest ever reported PCE for 2D material-based OSCs, obtained thanks to the enhanced exciton generation and exciton dissociation at the WSe₂-fullerene interface and also electron extraction to the back metal contact as a consequence of a balanced charge carriers mobility. These results push forward the implementation of transition-metal dichalcogenides to boost the performance of BHJ OSCs.

Modifying the Size of Ultrasound-Induced Liquid-Phase Exfoliated Graphene: From Nanosheets to Nanodots

Ultrasound-induced liquid-phase exfoliation (UILPE) is an established method to produce single- (SLG) and few-layer (FLG) graphene nanosheets starting from graphite as a precursor. In this paper we investigate the effect of the ultrasonication power in the UILPE process carried out in either N-methyl-2-pyrrolidone (NMP) or ortho-dichlorobenzene (o-DCB). Our experimental results reveal that while the SLGs/FLGs concentration of the NMP dispersions is independent of the power of the ultrasonic bath during the UILPE process, in o-DCB it decreases as the ultrasonication power increases. Moreover, the ultrasonication power has a strong influence on the lateral size of the exfoliated SLGs/FLGs nanosheets in o-DCB. In particular, when UILPE is carried out at ∼600 W, we obtain dispersions composed of graphene nanosheets with a lateral size of 180 nm, whereas at higher power (∼1000 W) we produce graphene nanodots (GNDs) with an average diameter of ∼17 nm. The latter nanostructures exhibit a strong and almost excitation-independent photoluminescence emission in the UV/deep-blue region of the electromagnetic spectrum arising from the GNDs' intrinsic states and a less intense (and strongly excitation wavelength dependent) emission in the green/red region attributed to defect states. Notably, we also observe visible emission with near-infrared excitation at 850 and 900 nm, a fingerprint of the presence of up-conversion processes. Overall, our results highlight the crucial importance of the solvent choice for the UILPE process, which under controlled experimental conditions allows the fine-tuning of the morphological properties, such as lateral size and thickness, of the graphene nanosheets toward the realization of luminescent GNDs.

Graphene-Perovskite Solar Cells Exceed 18 % Efficiency: A Stability Study

Interface engineering is performed by the addition of graphene and related 2 D materials (GRMs) into perovskite solar cells (PSCs), leading to improvements in the power conversion efficiency (PCE). By doping the mesoporous TiO₂ layer with graphene flakes (mTiO₂ +G), produced by liquid-phase exfoliation of pristine graphite, and by inserting graphene oxide (GO) as an interlayer between the perovskite and hole-transport layers, using a two-step deposition procedure in air, we achieved a PCE of 18.2 %. The obtained PCE value mainly results from improved charge-carrier injection/collection with respect to conventional PSCs. Although the addition of GRMs does not influence the shelf life, it is beneficial for the stability of PSCs under several aging conditions. In particular, mTiO₂ +G PSCs retain more than 88 % of the initial PCE after 16 h of prolonged 1 sun illumination at the maximum power point. Moreover, when subjected to prolonged heating at 60 °C, the GO-based structures show enhanced stability with respect to mTiO₂ +G PSCs, as a result of thermally induced modification at the mTiO₂ +G/perovskite interface. The exploitation of GRMs in the form of dispersions and inks opens the way for scalable large-area production, advancing the possible commercialization of PSCs.