Modified halloysite nanotubes: nanoarchitectures for enhancing the capture of oils from vapor and liquid phases

We prepared hybrid halloysite nanotubes (HNT/sodium alkanoates) in which the inner cavity of the nanoclay was selectively modified. Physicochemical studies evidenced the interactions between HNT and sodium alkanoates, ruled out clay exfoliation, quantified the amount of the loaded substance, and showed an increase of the total net negative charge, allowing us to obtain rather stable aqueous nanoclay dispersions. These dispersions were exploited as inorganic micelles to capture hydrocarbon and aromatic oils in the vapor and liquid states and were revealed to be nonfoaming but very efficient in encapsulating oils. Here, we have fabricated biocompatibile and low-cost inorganic micelles that can be exploited for industrial applications on a large scale.

Cyclodextrin–calixarene co-polymers as a new class of nanosponges

Novel nanosponge materials, obtained by co-polymerization of cyclodextrin and calixarene derivatives, have been characterized by various techniques and tested for the removal of model pollutants from aqueous solution.

Halloysite nanotube with fluorinated lumen: non-foaming nanocontainer for storage and controlled release of oxygen in aqueous media

Halloysite clay nanotubes were selectivity modified by adsorbing perfluoroalkylated anionic surfactants at the inner surface. The modified nanotubes formed kinetically stable dispersions due to the enhanced electrostatic repulsions exercised between the particles. We proved that the modified nanotubes can be used as non-foaming oxygen nanocontainers in aqueous media. The gas release from supersaturated dispersions can be controlled by external stimuli and system composition. In conclusion, we managed to put forward an easy strategy to develop smart materials from natural nanoclays, which can endow important applications like the storage and delivery of gas.

Quantitative description of temperature induced self-aggregation thermograms determined by differential scanning calorimetry

A novel thermodynamic approach for the description of differential scanning calorimetry (DSC) experiments on self-aggregating systems is derived and presented. The method is based on a mass action model where temperature dependence of aggregation numbers is considered. The validity of the model was confirmed by describing the aggregation behavior of poly(ethylene oxide)-poly(propylene oxide) block copolymers, which are well-known to exhibit a strong temperature dependence. The quantitative description of the thermograms could be performed without any discrepancy between calorimetric and van 't Hoff enthalpies, and moreover, the aggregation numbers obtained from the best fit of the DSC experiments are in good agreement with those obtained by light scattering experiments corroborating the assumptions done in the derivation of the new model.

Dispersions of nanoclays of different shapes into aqueous and solid biopolymeric matrices. Extended physicochemical study

Dispersions of nanofillers into aqueous and solid biopolymeric matrices were studied from the physicochemical viewpoint. This work was carried out based on the idea that the combination of biopolymers, derived from renewable resources, and nanofiller, environmentally friendly, may form a new generation of nanomaterials with excellent and unique properties at low cost. To this purpose, two pectins with different degrees of methyl esterification and nanoclays like halloysite and laponite RD were selected. The thermodynamic and structural studies on the aqueous mixtures of pectin and nanoclay were able to discriminate the interactions, which control the adsorption of pectin onto the filler and the aggregation of both pectin and clay particles. The gained insights were useful to interpret the mesoscopic structure of the nanocomposites (prepared from the aqueous mixtures by means of the casting method) evidenced by SEM, thermal stability, tensile properties, and transparency investigations. The attained knowledge represents a basic point for designing new hybrid nanostructures in both the aqueous and the solid phase for specific purposes.

Extended investigation of the aqueous self-assembling behavior of a newly designed fluorinated surfactant

The physicochemical behavior of the newly synthesized fluorinated 5-hydroxyamino-3-perfluoroheptyl-1,2,4-oxadiazin-6-one (PFHO) surfactant was investigated. Thermal analysis showed that the pure surfactant is thermally stable under an inert atmosphere to 135 degrees C, which is several degrees higher than the melting point (99 degrees C). PFHO is rather active at the water/air interface where it assumes a standing up configuration. It exhibits an enhanced self-assembling behavior; accordingly, the critical micellar concentrations at some temperatures are 2 orders of magnitude lower than those of a similar surfactant having the same phobicity, such as sodium perfluorooctanoate. Even in the dilute domains, PFHO forms large micelles, detected by dynamic light scattering studies, that are precursors of the gel occurring at rather low composition (only 2.0% w/w at 25 degrees C). Optical microscopy evidenced cylindrical aggregates in gel systems whereas differential scanning calorimetry and viscosity showed that the gels are stable over a wide temperature range to ca. 70 degrees C where they undergo a reversible gel --> fluid transition. Finally, percolation theory combined with data provided by the experimental studies enabled us to predict the PFHO gelation process correctly, in very good agreement with the experimental findings.

Adsorption of triblock copolymers and their homopolymers at laponite clay/solution interface. Role played by the copolymer nature

The adsorption thermodynamics of copolymers, based on ethylene oxide (EO) and propylene oxide (PO) units, at the laponite (RD) clay/liquid interface was determined at 298 K. The copolymer nature was tuned at molecular level by changing the hydrophilicity, the architecture and the molecular weight (Mw) keeping constant the EO/PO ratio. Polyethylene (PEGs) and polypropylene (PPGs) glycols with varying Mw and their mixture were also investigated to discriminate the role of the EO and the PO segments in the adsorption process. Enthalpies of transfer of RD, at fixed concentration, from water to the aqueous macromolecule solutions as functions of the macromolecule molality were determined. They were treated quantitatively by means of a model based on two equilibria: (1) one-to-one binding between the macromolecule and the site on the solid and (2) two-to-one binding following which one macromolecule interacts with another one adsorbed onto the solid. The good agreement between the equilibrium constants obtained from calorimetry and those determined from kinetic experiments confirmed the reliability of the experimental and theoretical approaches. Almost all of the systems investigated are highlighted by the one-to-one binding; the L35 and 10R5 systems present both equilibria. The insights provided by the thermodynamics of adsorption of their homopolymers onto RD were fruitful in obtaining detailed information on the nature of the forces involved between RD and the copolymers. The data obtained in the present work clearly evidenced that for comparable polymer Mw, PPG is more suitable in building up a steric barrier around the RD particles and, indeed, exhibits several advantages and no drawbacks. Moreover, the parent copolymers may properly functionalize the RD surface by exploiting both their high affinity to the solid surface and the ability to self-assemble onto it as L35 and 10R5 clearly showed.

Adsorption of a dye on clay and sand. Use of cyclodextrins as solubility-enhancement agents

Laboratory-scale studies were aimed at elucidating the physico-chemical aspects on the removal process of crystal violet (CV) from waters and solid substrates. The laponite clay (RD) and sand were chosen for the double aim at investigating them as CV adsorbents for water treatment and as substrates which mime the soil components. Sand is very effective in removing CV from waters. The cyclodextrins (CDs) were exploited as solubility-enhancement agents to remove CV from the solid substrates. They are powerful solvent media because they extract the CV from sand forming water-soluble CV/CD inclusion complexes and do not show affinity for sand. Optimum performance was shown by the modified CDs (i.e. hydroxypropyl-beta-cyclodextrin and methyl-beta-cyclodextrin). A linear correlation between the logarithm of the equilibrium constant for the CV/CD inclusion complexes formation (K(cpx)) and the maximum amount of CV extracted from sand in the columns experiments at a flow rate of 1.5 ml min(-1) was drawn. This relationship predicts that CDs with K(cpx)<180 M(-1) are not suitable for CV removal from sand. CDs failed to displace CV from RD because they generate the formation of RD clusters where CV remains entrapped.

Aqueous Block Copolymer−Surfactant Mixtures and Their Ability in Solubilizing Chlorinated Organic Compounds. A Thermodynamic and SANS Study

Within the topic of surfactant enhanced solubilization of additives sparingly soluble in water, volumetric, solubility, conductivity, and small-angle neutron scattering (SANS) experiments on mixtures composed of alpha,omega-dichloroalkane, surfactant, copolymer, and water were carried out at 298 K. The triblock copolymers (ethylene oxide)132(propylene oxide)50(ethylene oxide)132 (F108) and (ethylene oxide)76(propylene oxide)29(ethylene oxide)76 (F68) were chosen to investigate the role of the molecular weight keeping constant the hydrophilic/hydrophobic ratio. The selected surfactants are sodium decanoate (NaDec) and decyltrimethylammonium bromide (DeTAB) with comparable hydrophobicity and different charged heads. The alpha,omega-dichloroalkanes were chosen as contaminant prototypes. For the water + surfactant + copolymer mixtures, both the volume and the SANS results straightforwardly evidenced that (1) monomers of NaDec and copolymer unimers generate small mixed aggregates, (2) monomers of DeTAB combined with copolymer unimers do not form aggregates, and (3) unimeric copolymer is solubilized into NaDec and DeTAB micelles. The alpha,omeaga-dichloroalkanes presence induces the F108 aggregation even at very low copolymer composition. The addition of surfactant disintegrates the F108 aggregates and, consequently, the additive is expelled into the aqueous phase. Once F108 is in the unimeric state, it forms copolymer-micelle aggregates which incorporate the oil. In the case of F68 both the volumetric and the SANS data reveal that the additive does not alter the copolymer unimeric state. Moreover, they show that for the aqueous DeTAB-F68 system the additive trapping in both the copolymer-micelle aggregate and the pure micelles takes place being enhanced in the former aggregate in agreement with solubility experiments. For the NaDec-F68 mixtures, an additional solubilization process in the premicellar copolymer-surfactant microstructures occurs. SANS and conductivity data show that the additive incorporation into the mixed and the pure micelles does not essentially influence the structural properties of the aggregates.

Aqueous nonionic copolymer-functionalized laponite clay. A thermodynamic and spectrophotometric study to characterize its behavior toward an organic material

The affinity of functionalized Laponite clay toward an organic material in the aqueous phase was explored. Functionalization was performed by using triblock copolymers based on ethylene oxide (EO) and propylene oxide (PO) units that are EO(11)PO(16)EO(11) (L35) and PO(8)EO(23)PO(8) (10R5). Phenol (PhOH) was chosen as organic compound, which represents a contaminant prototype. To this purpose, densities and enthalpies of mixing as well as PhOH UV-absorption spectra were determined. The enthalpy and the spectrophotometry revealed PhOH-Laponite interactions whereas the volume did not. It emerged that the area occupied by PhOH on the Laponite surface is equal to that computed from the partial molar volume of PhOH in water, corroborating the insensitivity of the experimental volumes to the adsorption process. The situation where both PhOH and copolymer are simultaneously present in the aqueous Laponite suspension was also investigated. It turned out that the copolymer replaces PhOH from the water/Laponite clay interface, resulting in L35 being the more efficient. Moreover, the lateral copolymer-phenol interactions enhance the anchoring of PhOH to the solid surface. The reverse copolymer exercises the most important relevant effect. The UV-absorption spectra of PhOH in the water + copolymer + Laponite mixtures provided information that is consistent with those given by the calorimetric experiments. In conclusion, the aqueous copolymer-functionalized Laponite presents surface properties very different from the bare Laponite, favoring the removal of the organic compound from the solid surface.

A thermodynamic study to evidence the -dichloroalkane/ block copolymer mixed aggregates formation: Effect of the copolymer architecture

The thermodynamics of alpha,omega-dichloroalkanes in aqueous solutions of (ethylene oxide)(11)(propylene oxide)(16)(ethylene oxide)(11) (L35) and (propylene oxide)(8)(ethylene oxide)(23)(propylene oxide)(8) (10R5) was determined at 298 and 305 K. Modeling the experimental data allowed to calculate the standard free energy (DeltaG(D)(o)/w) and the volume (DeltaV(D)/w) for the additive-copolymer mixed aggregates formation per additive molecule. DeltaG(D)(o)/w for Cl(2)CH(2) and Cl(2)(CH(2))(2) evidenced that the process is controlled by the forces exercising between the chlorine atoms and the OH groups of the copolymer micelles protruded into the aqueous phase. Cl(2)(CH(2))(3) experiences both the hydrophilic and hydrophobic domains into the aggregates. The hydrophobic interactions are more significant in 10R5 whereas the hydrophilic ones are more significant in L35. Temperature increase does not influence DeltaG(D)(o)/w in 10R5, whereas, it does influence DeltaG(D)(o)/w in L35, enhancing the ability of the aggregate to extract the chlorinated compounds from the aqueous phase. The DeltaV(D)/w values are consistent with the free energy results. These insights agree with those predicted by the Flory liquid lattice theory. The calculations extended to several alpha,omega-dichloroalkanes showed that Cl(2)CH(2) and Cl(2)(CH(2))(2) prefer poly(ethylene oxide) (PEO), Cl(2)(CH(2))(3) exhibits the same affinity for both PEO and poly(propylene oxide) (PPO), whereas the more hydrophobic additives show a preference for PPO. The copolymer architecture plays a relevant role in the alpha,omega-dichloroalkane solubilization into the polymeric aggregates.

The solubilisation behaviour of some dichloroalkanes in aqueous solutions of PEO–PPO–PEO triblock copolymers: a dynamic light scattering, fluorescence spectroscopy, and SANS study

The aggregation behaviour of PEO-PPO-PEO triblock copolymers in water and in water + chlorinated additive mixtures was studied by means of fluorescence spectroscopy, dynamic light scattering (DLS), and small-angle neutron scattering (SANS). The copolymers were chosen such as to investigate the effects of molecular architecture (L35 and 10R5) and molecular weight by keeping constant the hydrophilic/hydrophobic balance (F88 and F108). 1,2-Dichloroethane was used as a prototype of water basins contaminants. The hydrodynamic radius of the block copolymer aggregates (R(h,M)) and the intensity ratio of pyrene of the first and the third vibrational band (I(1)/I(3)) were determined as a function of temperature (10-45 degrees C) and concentration. The copolymer architecture essentially does not affect R(h,M) in the entire range of temperature and concentration investigated. At a given temperature, increasing macromolecular size leads to a decrease of R(h,M). With rising temperature R(h,M) also decreases. According to the DLS results, the I(1)/I(3) change with temperature clearly detects the aggregation only for F88 and F108. The presence of 1,2-dichloroethane, at concentrations close to its solubility in water, does not lead to changes in the distribution of hydrodynamic radii for L35 and 10R5. Larger quantities of additive induce the formation of quite polydisperse mixed aggregates for L35 and of networks for 10R5. In the case of F88 and F108, low concentrations of additive lead to formation of mixed aggregates with smaller R(h,M). The SANS results corroborate the DLS and fluorescence findings proving enhancement of the copolymer aggregation through the presence of 1,2-dichloroethane. The DLS findings combined with those from the fluorescence spectroscopy provide some insight into the site of solubilisation of the additive in the aggregates.

Heat capacity of transfer of (Ethylene oxide)13-(propylene oxide)30-(ethylene oxide)13 from water to the aqueous anionic surfactant solutions at 298 K. A quantitative treatment

Heat capacities of transfer (DeltaCpt) of unimeric (ethylene oxide)13-(propylene oxide)30-(ethylene oxide)13 from water to the aqueous surfactant solutions as functions of the surfactant concentrations (mS) were determined at 298 K. The surfactants investigated are sodium hexanoate, sodium heptanoate, sodium octanoate, sodium undecanoate, and sodium dodecanoate. For short alkyl chain surfactants, the profiles of the DeltaCpt versus mS curves show maxima and minima; for long alkyl chain surfactants, the maximum becomes sharper and moved to lower mS values whereas the minimum tends to disappear. These experimental trends are different from those of the enthalpy in agreement with the fact that heat capacity, being the derivative of enthalpy with respect to temperature, reflects additional terms generated by temperature change on the equilibria in solution. On the basis of a thermodynamic model recently proposed by us for properties first derivatives of Gibbs free energy, a quantitative treatment of the experimental data was done. Such an approach assumes that even in the dilute surfactant region monomers of surfactant associate with unimeric copolymer generating surfactant-copolymer aggregation complexes and, whenever the surfactant achieves the conditions for the micellization, the formation of copolymer-micelle mixed aggregates takes place. The equation derived for the heat capacity of transfer is more complex than that for the enthalpy because it contains five additional terms due to the shift of the equilibria induced by the temperature change. It turned out that these contributions, evaluated by using the equilibrium constants and the associated enthalpies, cannot be neglected for a quantitative treatment of the experimental data. The minimizing procedure provided the heat capacity changes for the formation of the surfactant-copolymer aggregation complexes and the copolymer-micelle mixed aggregates.

Microvascular lesions in reflux oesophagitis and Barrett's oesophagus

In 30 patients with reflux oesophagitis, the mucosal microvessels have been studied by transmission electron microscopy. The aim of the study was to test the hypothesis that a microvascular injury is involved in reflux oesophagitis, and to clarify if the epithelial metaplasia is correlated with a contemporaneous modification of the microvasculature in Barrett's oesophagus. In squamous epithelium-lined mucosa, signs of microangiopathy were found in all patients and capillaries regularly showed an interrupted, duplicated, or thickened basal lamina. In areas of columnar metaplasia, capillaries showed an ectatic lumen and a thin basal lamina without duplications or interruptions; endothelial cells had a thin rim of cytoplasm with many fenestrations. These findings demonstrate that microangiopathy is associated with epithelial damage in reflux oesophagitis.

[The choice of the surgical intervention in nonvaricose hemorrhages of the digestive tract]

In the last years, the emergency endoscopic treatment has greatly reduced the number of non-variceal gastro-duodenal haemorrhages treated by surgery. The authors review the literature from 1980 to 1990 in the light of personal clinical experience and formulate a surgical protocol of the cases not healed by medical or endoscopic therapy.