Transient power elevation during iron dextran infusion in a patient with a continuous-flow left ventricular assist device

Anemia is common in patients with mechanical circulatory support and is associated with increased morbidity. Repletion using parenteral iron infusions has been proven to be beneficial in patients with heart failure. In this report, we describe a case of increased power and flows of continuous-flow left ventricular assist device (LVAD) during an iron dextran infusion. We subsequently studied the effects of iron dextran infusion in an in vitro LVAD mock circulatory loop. The observed increase in flow and power was most likely due to drug-patient interaction rather than drug-LVAD interaction. Mock loops and in vivo animal models may be necessary for proactive evaluation of the safety of intravenous (IV) preparations in this patient population.

Use of a Mechanical Circulatory Support Simulation to Study Pump Interactions With the Variable Hemodynamic Environment

The Virtual Mock Loop, a versatile virtual mock circulation loop, was developed using a lumped-parameter model of the mechanically assisted human circulatory system. Inputs allow specification of a variety of continuous-flow pumps (left, right, or biventricular assist devices) and a total artificial heart that can self-regulate between left and right pump outputs. Hemodynamic inputs were simplified using a disease-based input panel, allowing selection of a combination of cardiovascular disease states, including systolic and diastolic heart failure, stenosis, and/or regurgitation in each of the four valves, and high to low systemic and pulmonary vascular resistance values. The menu-driven output includes a summary of hemodynamic parameters and graphical output of selected flows, pressures, and volumes in the heart's four chambers as well as in the pulmonary artery and aorta. New tools to augment experimental research on implantable heart-assist devices and to increase our understanding of patient-specific pump interactions are in high demand. The purpose of this ongoing study is to demonstrate the use of a system analysis computer simulation to explore and better comprehend the interactions of mechanical circulatory support pumps with a more extensive combination of patient-specific or simulation conditions than can be established by practical experimentation. Usability is an important factor in constructing computer models for research purposes, and among our primary objectives in creating this simulation model were to make it as portable and useful as possible outside the lab environment, by people not involved in the creation of its operational software.

New Cardioscope-Based Platform for Minimally Invasive and Percutaneous Beating Heart Interventions

With heart disease increasing worldwide, demand for new minimally invasive techniques and transcatheter technologies to treat structural heart disease is rising. Cardioscopy has long been considered desirable, as it allows direct tissue visualization and intervention to deliver therapy via a closed chest, with real-time fiber-optic imaging of intracardiac structures. Herein, the feasibility of the advanced cardioscopic platform, allowing both transapical and fully percutaneous access is reported. The latter technique, in particular, is believed to represent a milestone in the development of the cardioscope. Cardioscope prototypes were used in 7 bovine models (77.2-101.1 kg) for transapical or percutaneous insertion. Miniature custom-built, water-sealed cameras (diameters: Storz, 7 Fr; Medigus, 1.2 mm) were used. For percutaneous cardiopulmonary bypass, the pulmonary artery was occluded by a balloon catheter (Intraclude, 10.5 Fr, 100 cm) and perfused with a crystalloid solution. Cameras were inserted transapically (n = 4) through the left ventricular apex or percutaneously (n = 5) via the carotid artery. Insertion of the optimized cardioscope devices was feasible via either approach. Intracardiac structures (left ventricle, mitral valve opening/closure, chordal apparatus, aortic valve leaflets, and regurgitation) were visualized clearly and without deformation. Catheter tips were successfully bent >180° inside the left ventricle; rotation and navigation to view various intracardiac structures were feasible in all cases. This study showed the technical feasibility of direct cardioscopic visualization using transapical and percutaneous approaches. This advanced cardioscopic instrumentarium represents a promising platform for future interventions and surgery under direct visualization of the beating heart.

Initial in vitro testing of a paediatric continuous-flow total artificial heart

OBJECTIVES

Mechanical circulatory support has become standard therapy for adult patients with end-stage heart failure; however, in paediatric patients with congenital heart disease, the options for chronic mechanical circulatory support are limited to paracorporeal devices or off-label use of devices intended for implantation in adults. Congenital heart disease and cardiomyopathy often involve both the left and right ventricles; in such cases, heart transplantation, a biventricular assist device or a total artificial heart is needed to adequately sustain both pulmonary and systemic circulations. We aimed to evaluate the in vitro performance of the initial prototype of our paediatric continuous-flow total artificial heart.

METHODS

The paediatric continuous-flow total artificial heart pump was downsized from the adult continuous-flow total artificial heart configuration by a scale factor of 0.70 (1/3 of total volume) to enable implantation in infants. System performance of this prototype was evaluated using the continuous-flow total artificial heart mock loop set to mimic paediatric circulation. We generated maps of pump performance and atrial pressure differences over a wide range of systemic vascular resistance/pulmonary vascular resistance and pump speeds.

RESULTS

Performance data indicated left pump flow range of 0.4-4.7 l/min at 100 mmHg delta pressure. The left/right atrial pressure difference was maintained within ±5 mmHg with systemic vascular resistance/pulmonary vascular resistance ratios between 1.4 and 35, with/without pump speed modulation, verifying expected passive self-regulation of atrial pressure balance.

CONCLUSIONS

The paediatric continuous-flow total artificial heart prototype met design requirements for self-regulation and performance; in vivo pump performance studies are ongoing.

Lumbar muscle atrophy caused by harness replacement in a chronic calf model of total artificial heart implantation

The postoperative care of animals implanted with mechanical circulatory support devices is complex. The standard of care requires continuous monitoring of hemodynamic parameters post implant, wound care, and maintenance of the animal's well-being, but also includes controlling the animal's biomechanics under conditions of continuous restraint and harnessing. In such studies, a harness provides secure fixation of the exteriorized device driveline and pressure lines and aids animal handling (lifting, position adjustment, and assistance with standing up). Harnessing is a key element in large-animal surgery. It affects the animal's conditions, safety, and post-procedure troubleshooting and thus may drastically worsen postoperative outcomes if improperly handled. Here we report a case associated with an unplanned harness replacement in a chronic animal model implanted with the Cleveland Clinic continuous-flow total artificial heart. Inadvertent changes to the harness resulted in posture change caused by muscular atrophy of the calf's spine that had been under long-term harness support.

Early in vivo experience with the pediatric continuous-flow total artificial heart

BACKGROUND

Heart transplantation in infants and children is an accepted therapy for end-stage heart failure, but donor organ availability is low and always uncertain. Mechanical circulatory support is another standard option, but there is a lack of intracorporeal devices due to size and functional range. The purpose of this study was to evaluate the in vivo performance of our initial prototype of a pediatric continuous-flow total artificial heart (P-CFTAH), comprising a dual pump with one motor and one rotating assembly, supported by a hydrodynamic bearing.

METHODS

In acute studies, the P-CFTAH was implanted in 4 lambs (average weight: 28.7 ± 2.3 kg) via a median sternotomy under cardiopulmonary bypass. Pulmonary and systemic pump performance parameters were recorded.

RESULTS

The experiments showed good anatomical fit and easy implantation, with an average aortic cross-clamp time of 98 ± 18 minutes. Baseline hemodynamics were stable in all 4 animals (pump speed: 3.4 ± 0.2 krpm; pump flow: 2.1 ± 0.9 liters/min; power: 3.0 ± 0.8 W; arterial pressure: 68 ± 10 mm Hg; left and right atrial pressures: 6 ± 1 mm Hg, for both). Any differences between left and right atrial pressures were maintained within the intended limit of ±5 mm Hg over a wide range of ratios of systemic-to-pulmonary vascular resistance (0.7 to 12), with and without pump-speed modulation. Pump-speed modulation was successfully performed to create arterial pulsation.

CONCLUSION

This initial P-CFTAH prototype met the proposed requirements for self-regulation, performance, and pulse modulation.

Chronic in Vivo Function of a New Ventricular Assist Device: The Extracorporeal Pulsatile Assist Device (Epad)

An extracorporeal pulsatile assist device (EPAD) is a valveless, single-chambered, pneumatically-actuated blood pump composed of a graft conduit, connecting ring, bladder, and blowmolded housing. This allows a simple and quick surgical procedure and is easily actuated with a conventional intraaortic balloon pumping console if desired. To evaluate in vivo pump functions, the EPAD was tested in calves as a left ventricular assist device for 6-24 days. The EPAD was well synchronized to the natural heart beat up to 130 bpm in the counterpulsation mode with mild systemic heparinization (active clotting time: 200-250 seconds). Heart rate, coronary flow and cardiac output were not significantly changed by on-off testing. However, the pump showed promising diastolic augmentation (10.8% increase in the diastolic pressure time index) in these chronic animal experiments.

Acute Swine Model for Assessing Biocompatibility of Biomedical Interface Materials

We established an acute animal model for early, straightforward, and reproducible assessment of a biocompatible material interface. Bilateral femoral artery-to-vein shunts were created in 12 pigs: two tubes per shunt, the left two coated and the right two uncoated. We evaluated two groups: uncontrolled flow (UF; shunt flow unregulated) and controlled flow (CF; shunt flow ∼50 mL/min). For each case on each side, two shunts were evaluated: one for 1 h and the other for 3 h. Arterial blood gas and complete blood count were recorded at baseline, 1, and 3 h. Mean shunt flows were 532 ± 88 mL/min UF and 52 ± 8 mL/min CF. Differences in flow were much smaller in CF (0.5 mL/min; 1% of mean flow) than UF (24.8 mL/min; 5% of mean flow). In UF, significant changes occurred: in pH, from start of shunting through 1 h; in pO₂ and pCO₂, from start through 3 h. This swine model using bilateral femoral shunts with controlled blood flow provides a reliable, reproducible, easily implemented method by which to evaluate biocompatibility of device coatings at an early stage of investigation.

Novel technique for airless connection of artificial heart to vascular conduits

Successful implantation of a total artificial heart relies on multiple standardized procedures, primarily the resection of the native heart, and exacting preparation of the atrial and vascular conduits for pump implant and activation. Achieving secure pump connections to inflow/outflow conduits is critical to a successful outcome. During the connection process, however, air may be introduced into the circulation, traveling to the brain and multiple organs. Such air emboli block blood flow to these areas and are detrimental to long-term survival. A correctly managed pump-to-conduit connection prevents air from collecting in the pump and conduits. To further optimize pump-connection techniques, we have developed a novel connecting sleeve that enables airless connection of the Cleveland Clinic continuous-flow total artificial heart (CFTAH) to the conduits. In this brief report, we describe the connecting sleeve design and our initial results from two acute in vivo implantations using a scaled-down version of the CFTAH.

Mechanism of Self-Regulation and In Vivo Performance of the Cleveland Clinic Continuous-Flow Total Artificial Heart

Cleveland Clinic's continuous-flow total artificial heart (CFTAH) provides systemic and pulmonary circulations using one assembly (one motor, two impellers). The right pump hydraulic output to the pulmonary circulation is self-regulated by the rotating assembly's passive axial movement in response to atrial differential pressure to balance itself to the left pump output. This combination of features integrates a biocompatible, pressure-balancing regulator with a double-ended pump. The CFTAH requires no flow or pressure sensors. The only control parameter is pump speed, modulated at programmable rates (60-120 beats/min) and amplitudes (0 to ±25%) to provide flow pulses. In bench studies, passive self-regulation (range: -5 mm Hg ≤ [left atrial pressure - right atrial pressure] ≤ 10 mm Hg) was demonstrated over a systemic/vascular resistance ratio range of 2.0-20 and a flow range of 3-9 L/min. Performance of the most recent pump configuration was demonstrated in chronic studies, including three consecutive long-term experiments (30, 90, and 90 days). These experiments were performed at a constant postoperative mean speed with a ±15% speed modulation, demonstrating a totally self-regulating mode of operation, from 3 days after implant to explant, despite a weight gain of up to 40%. The mechanism of self-regulation functioned properly, continuously throughout the chronic in vivo experiments, demonstrating the performance goals.

Unlocking the box: basic requirements for an ideal ventricular assist device controller

INTRODUCTION

A modern ventricular assist device (VAD) system comprises an implantable rotary blood pump and external components located outside the patient's body: a wearable controller connected to the pump via a percutaneous cable, wearable rechargeable batteries, battery charger, alternating- and direct-current power supplies, and a hospital device to control and monitor the system. If the blood pump is the 'heart' of a VAD system, the controller is its 'brain.' The controller drives the pump's electrical motor; varies the pump speed or flow based on user commands or feedback signals; collects, processes, and stores data; performs self-diagnostics; transmits to and receives data from other system components, i.e., hospital monitor and batteries; and provides various types of user interface - audible, visual, and tactile. Areas covered: Here we describe the essential functions and basic design of the VAD external controller and give our views on the future of this technology. Expert commentary: Controllers for VAD systems are crucial to their successful operation. The current clinically available system comprises an external power supply and patient-friendly controller unit. Future controller solutions may enable remote hospital monitoring, more intuitive system interface, and the potential to use a single controller to automatically control a biventricular assist device configuration.

Generating pulsatility by pump speed modulation with continuous-flow total artificial heart in awake calves

The purpose of this study was to evaluate the effects of sinusoidal pump speed modulation of the Cleveland Clinic continuous-flow total artificial heart (CFTAH) on hemodynamics and pump flow in an awake chronic calf model. The sinusoidal pump speed modulations, performed on the day of elective sacrifice, were set at ±15 and ± 25% of mean pump speed at 80 bpm in four awake calves with a CFTAH. The systemic and pulmonary arterial pulse pressures increased to 12.0 and 12.3 mmHg (±15% modulation) and to 15.9 and 15.7 mmHg (±25% modulation), respectively. The pulsatility index and surplus hemodynamic energy significantly increased, respectively, to 1.05 and 1346 ergs/cm at ±15% speed modulation and to 1.51 and 3381 ergs/cm at ±25% speed modulation. This study showed that it is feasible to generate pressure pulsatility with pump speed modulation; the platform is suitable for evaluating the physiologic impact of pulsatility and allows determination of the best speed modulations in terms of magnitude, frequency, and profiles.

Current status of mechanical circulatory support for treatment of advanced end-stage heart failure: successes, shortcomings and needs

INTRODUCTION

Heart failure (HF) remains a major global burden in terms of morbidity and mortality. Despite advances in pharmacological and resynchronization device therapy, many patients worsen to end-stage HF. Although the gold-standard treatment for such patients is heart transplantation, there will always be a shortage of donor hearts. Areas covered: A left ventricular assist device (LVAD) is a valuable option for these patients as a bridge measure (to recovery, to candidacy for transplant, or to transplant itself) or as destination therapy. This review describes the current indications for and complications of the most commonly implanted LVADs. In addition, we review the potential and promising new LVADs, including the HeartMate 3, MVAD, and other LVADs. Studies investigating each were identified through a combination of online database and direct extraction of studies cited in previously identified articles. Expert commentary: The goal of LVADs has been to fill the gap between patients with end-stage HF who would likely not benefit from heart transplantation and those who could benefit from a donor heart. As of now, the use of LVADs has been limited to patients with end-stage HF, but next-generation LVAD therapy may improve both survival and quality of life in less sick patients.

Moderate hypothermia technique for chronic implantation of a total artificial heart in calves

The benefit of whole-body hypothermia in preventing ischemic injury during cardiac surgical operations is well documented. However, application of hypothermia during in vivo total artificial heart implantation has not become widespread because of limited understanding of the proper techniques and restrictions implied by constitutional and physiological characteristics specific to each animal model. Similarly, the literature on hypothermic set-up in total artificial heart implantation has also been limited. Herein we present our experience using hypothermia in bovine models implanted with the Cleveland Clinic continuous-flow total artificial heart.

The axial continuous-flow blood pump: Bench evaluation of changes in flow associated with changes of inflow cannula angle

BACKGROUND

Changes in the geometry of the HeartMate II (HMII) inflow cannula have been implicated in device thrombosis post-implant. The purpose of this in vitro study was to evaluate what effects changing the angle of the cannula in relation to the pump may have on pump flow and arterial pressure, under simulated inflow conditions.

METHODS

The HMII with an inflow cannula was mounted on a mock loop consisting of a pulsatile pneumatic ventricle to simulate the native ventricle. The angles of the HMII in relation to the inflow cannula were adjusted by separate fixed gooseneck holders. A custom-made miniature steerable camera was introduced into a flexible portion of the HMII inflow cannula. Endoscopic views of various types of inflow cannula constriction (bending, squeezing, stretching and twisting) were recorded, and pump flow and systemic arterial pressure (AoP) were assessed during each simulation.

RESULTS

Baseline mean pump flow (3.5 liters/min) and mean AoP (91.5 mm Hg) were unchanged by bending maximally in 2 different directions, twisting up to 30°, stretching (compression or extension), or occluding the inflow graft <90%. However, mean pump flow and mean AoP decreased substantially when the inflow graft became occluded by ≥90% by sliding or squeezing.

CONCLUSIONS

"Less-than-critical" obstruction (what we define here as <90%) of the HMII inflow cannula did not reveal substantial changes in pump flow or AoP. Data suggest that a major alteration to inflow cannula geometry is required to achieve clinically relevant hemodynamic changes. These data confirm that minor changes in angulation of the inflow cannula have no impact on flow through the device.