Obliquely oriented superior accessory fissure of the lower lobe of the lung: CT evaluation of the normal appearance and effect on the distribution of parenchymal and pleural opacities

PURPOSE

To review computed tomographic (CT) and radiographic features of an oblique superior accessory fissure in the lower lobe of the lung.

MATERIALS AND METHODS

CT scans in 34 patients with a prospectively identified accessory fissure of the lower lobe were reviewed and correlated with chest radiographs (31 patients). The fissure and its relationship to segmental bronchovascular structures were evaluated on transverse scans. Three-dimensional (3D) shaded surface display (SSD) reconstructions were obtained from spiral volume data (six patients).

RESULTS

Thirty-four patients had 36 accessory fissures (26 right, 10 left). Four of the 36 accessory fissures were manifested by a normal fissure line; two, by slight thickening or minimal linear atelectasis; 16, by thicker linear or subsegmental atelectasis; two, by contiguous tumor infiltration; one, by adjacent consolidation; and 11, by intrafissural extension of pleural fluid. Analysis of bronchovascular structures revealed that this fissure was the superior accessory fissure. The 3D SSD reconstructions demonstrated an oblique orientation. On frontal radiographs, presence of this fissure correlated with a curvilinear band of atelectasis coursing inferomedially and obliquely from its intersection with the lateral aspect of the major fissure toward the infrahilar region on the right and the heart border on the left. Chest radiographs also showed intrafissural extension of pleural fluid.

CONCLUSION

A superior accessory fissure of the lower lobe, more common on the right than on the left, can be identified at transverse CT. Contrary to previous descriptions, it may be oblique, as findings on transverse images suggest and 3D SSD reconstructions confirm. Its presence correlates with characteristic patterns of atelectasis and pleural fluid collection on conventional radiographs.

Production of listeriolysin O by Listeria monocytogenes (Scott A) under heat-shock conditions

Early stationary phase cells of Listeria monocytogenes (Scott A) were examined to determine the effect of heat-shock on the production of listeriolysin O (LLO) during and after resuscitation at 37 degrees C. Cells were subjected to a heat-shock at 48 degrees C for 1 h. Intracellular and extracellular proteins of the heat-shocked cells were assayed for LLO using a microtiter plate hemolysis assay and analyzed by sodium dodecyl sulfate-polyacrylamide gel electrophoresis (SDS-PAGE) and immunoblotting. Our results showed that significant amounts of LLO are synthesized under heat-shock conditions that are not detected in the extracellular medium by a functional assay. This situation is evident by the absence of hemolytic activity immediately after heat-shock, and may be due to either a lack of excretion or inactivation of the LLO at 48 degrees C once outside the cell. By studying the intracellular and extracellular proteins using SDS-PAGE and immunoblots of the heat-shocked cells, we substantiated an absence of excretion as an operating mechanism. Heat-shocked cells resumed LLO production within 2-4 h of resuscitation at 37 degrees C, achieving an activity level 2-fold higher compared to the controls and 4-fold higher compared to cells immediately after heat-shock. Most likely, the LLO excreted must have been from LLO accumulated in the cells during heat-shock.

Attitudes towards mental illness: testing the contact hypothesis among Chinese student nurses in Hong Kong

This study investigated whether previous contact with mental illness affected the attitudes to mental illness (AMI) of general student nurses in Hong Kong-the contact hypothesis. We employed a quasi-experimental design. We compared the attitudes to mental illness of students who had previous contact with mental illness through having taken a psychiatric secondment with those who had not taken a psychiatric secondment. Also, we compared the AMI of: students who had taken other courses related to mental illness with those who had not; those who had a family history of mental illness with those who had not; and those who lived with a mentally ill relative with those who did not. We found that previous contact with mental illness had no significant effect on the attitudes to mental illness of the students. In other words our findings do not support the contact hypothesis. Our sample expressed positive general attitudes to mental illness when presented with general issues about mental illness. However, their attitudes were less positive when presented with specific issues about mental illness that might impinge upon their daily lives. We discuss the implications of these findings for mental health nursing practice, education and research.

The psychophysiological assessment method for pilot's professional reliability

BACKGROUND

Previous research has shown that a pilot's professional reliability depends on two relative factors: the pilot's functional state and the demands of task workload. The Psychophysiological Reserve Capacity (PRC) is defined as a pilot's ability to accomplish additive tasks without reducing the performance of the primary task (flight task).

HYPOTHESIS

We hypothesized that the PRC was a mirror of the pilot's functional state. The purpose of this study was to probe the psychophysiological method for evaluating a pilot's professional reliability on a simulator.

METHODS

The PRC Comprehensive Evaluating System (PRCCES) which was used in the experiment included four subsystems: a) quantitative evaluation system for pilot's performance on simulator; b) secondary task display and quantitative estimating system; c) multiphysiological data monitoring and statistical system; and d) comprehensive evaluation system for pilot PRC. Two studies were performed. In study one, 63 healthy and 13 hospitalized pilots participated. Each pilot performed a double 180 degrees circuit flight program with and without secondary task (three digit operation). The operator performance, score of secondary task and cost of physiological effort were measured and compared by PRCCES in the two conditions. Then, each pilot's flight skill in training was subjectively scored by instructor pilot ratings. In study two, 7 healthy pilots volunteered to take part in the experiment on the effects of sleep deprivation on pilot's PRC. Each participant had PRC tested pre- and post-8 h sleep deprivation.

RESULTS

The results show that the PRC values of a healthy pilot was positively correlated with abilities of flexibility, operating and correcting deviation, attention distribution, and accuracy of instrument flight in the air (r = 0.27-0.40, p < 0.05), and negatively correlated with emotional anxiety in flight (r = -0.40, p < 0.05). The values of PRC in healthy pilots (0.61 +/- 0.17) were significantly higher than that of hospitalized pilots (0.43 +/- 0.15) (p < 0.05). The PRC value after 8 h sleep loss (0.50 +/- 0.17) was significantly lower than those before sleep loss (0.70 +/- 0.15) (p < 0.05).

CONCLUSION

We conclude that a pilot's PRC, which was closely related to flight ability and functional state, could partly represent the pilot's professional reliability. It is worthwhile to further research using a pilot's PRC as a predictor of mental workload in aircraft design.

Progress in the development of the ABIOMED total artificial heart

The ABIOMED implantable total artificial hearts in the final phase of engineering development. The system has a compact electrohydraulically driven energy converter sandwiched between two blood pumps, an internal electronics pack, an internal battery, a transcutaneous energy transmission coil for power transmission, and external wearable electronics pack and battery. The current effort is to complete development of the system during 1996 in preparation for formal pre clinical testing of the device. In vivo studies with the current thoracic unit (ABH II) have achieved 108 days of survival verifying the thermal, physiologic, and hematologic compatibility of the system. The abdominal implantable electronics pack showed no thermal dissipation problem. System improvements include scaling down the size of the thoracic unit, and efficiency enhancement in the power and hybrid electronics. The new system (ABH III) retains the flow capacity of greater than 10 L/min. Size reduction results in an atrial to sternal dimension that would fit 98% and 75% of men and women, respectively.

Chronic in vivo evaluation of an electrohydraulic total artificial heart

Development of the Abiomed total artificial heart (TAH) designed for human use is progressing. Implant durations of longer than 60 days have been achieved in calves. The device consists of blood pumps, valves, and a hydraulic atrial flow balancing chamber fabricated from polyetherurethane. The energy converter, a centrifugal hydraulic pump with a rotary fluid switching valve, is positioned between the blood pumps. In two consecutive chronic in vivo studies (47 days and longer than 60 days), cardiac output was maintained in excess of 8 l/min. The atrial flow balancing chamber maintained a mean right-to-left pressure gradient of 7.5 and -1.4 mmHg in each respective study. There were no pulmonary complications. Platelet counts, fibrinogen concentrations, and hematocrit values returned to baseline levels within 20 days, whereas bilirubin, serum glutamic-oxaloacetic transaminase, blood urea nitrogen, and creatinine levels returned to normal within 1 week of implant. After the first post-operative day, plasma free hemoglobin levels of less than 10 mg/dl indicated no device-related hemolysis throughout the duration of the studies. At explant (47 day study), pathologic analysis showed no renal infarcts, no tissue necrosis, and no thermal damage. The device was fully encapsulated by 2-4 mm thick fibrous connective tissue. A newly designed textured-to-smooth surface inflow showed no signs of pannus ingrowth or thrombotic complications. These studies demonstrate that this TAH is suitable for long-term implantation.

Life testing of implantable batteries for a total artificial heart

Although lithium cells may promise to be ideal as a rechargeable internal battery for a TAH, NiCd cells remain the most easily accessible off the shelf energy source. Twelve 1.2 A.hr prismatic NiCd (Sanyo, San Diego, CA) cells in series are being tested under the load condition of our TAH. The load consisted of a 1.5 A DC current with 1 A pulses of 40 msec duration at 3.33 Hz (100 bpm), a condition that can generate up to 8 L/min of cardiac output at physiologic pressures. Cells were tested at 37 degrees C. Cell voltages and temperatures were monitored. Testing was accelerated to five charge/discharge cycles per day. Discharge was terminated when any one cell dropped below 1.1 V. Charging (C/4) was continued until the battery voltage indicated a change in slope. Cell temperatures remained below 42 degrees C throughout the charge/discharge cycle. The battery pack settled to a nearly constant capacity of over 25 min after 10 cycles and has accumulated more than 1,000 cycles. Voltage differences among cells were small (SD < 25 mV), indicating consistency among cells. NiCd cells can serve as a reliable interim for TAH internal battery application.

An atrial hydraulic shunt in a total artificial heart. A balance mechanism for the bronchial shunt

An implantable TAH must be able to maintain physiologic atrial pressures over a range of left side shunt flows, which in humans can range up to 5% of the total cardiac output (CO). The authors describe the characteristics of an atrial hydraulic shunt in an electrohydraulic TAH. A small (10 cc stroke) chamber placed in line between the left atrial cuff and the inflow valve is shunted to the right hydraulic chamber. High left atrial pressure increases the volume displaced by this chamber; this concurrently reduces the right chamber stroke volume and flow relative to the left side. For left atrial pressures (LAP) between 0 and 15 mmHg, CO increased from approximately 3 to > 9 L/min (Starling-like behavior). This was attainable with bronchial flow settings between 0.2 to 0.7 L/min, satisfying physiologic needs. Left atrial pressure and RAP (right atrial pressure) tracked each other. The mean difference, LAP-RAP, remained within 5 mmHg at low filling pressures and approached 0 mmHg difference at high filling pressures. The results showed that the atrial hydraulic shunt method can adequately compensate for and manage physiologic left-right flow differences.

A compact and noise free electrohydraulic total artificial heart

The ABIOMED total artificial heart (TAH) is designed for long-term tether-free use in patients with end-stage heart disease. Blood pumping is achieved through hydraulic fluid motion across flexing diaphragms. The hydraulic power is derived from a miniature centrifugal pump (50% efficiency). Flow directional change needed for alternate left and right filling and ejection is achieved with a rotary valve. With no mechanical contact with the flexing membrane, the wedge angle between the two pumps sandwiching the energy convertor can be easily optimized for anatomic fit. The blood pumps (80 ml strokes) are fitted with trileaflet polyetherurethane valves (24 mm). The TAH is implanted using twist-lock stepless quick connectors to the inflow cuffs and outflow grafts. Left-right flow balance is achieved with an atrial hydraulic shunt placed between the left cuff and inflow valve. Animal studies show that the TAH fits very well in Long Horn calves weighing 90 to 100 kg and can provide cardiac output in excess of 10 L/min. A cadaver (85 kg) study showed the TAH fits within the pericardial region.

Five-tube most-probable-number method using the Fung-Yu tube for enumeration of Listeria monocytogenes in restructured meat products during refrigerated storage

The survival of Listeria monocytogenes in cooked, chopped hams stored at 5 degrees C for 5 weeks was studied. Slices of chopped ham (25 g) were inoculated with a three-strain mixture of L. monocytogenes (LM 101M, LM 103M, and Scott A) at levels of < or = 350 cfu/25 g and packaged in Stomacher bags. Prior to inoculation, L. monocytogenes cells were subjected to either heat-injury (56 degrees C, 30 min) or freeze-injury (-18 degrees C, 14 days). The organisms were detected by a five-tube most-probable-number (MPN) technique using the motility enrichment Fung-Yu tube, and the direct plating method. After storage at 5 degrees C for 1 week, there was a one log10 reduction in counts. Thereafter, Listeria recovered and heat- and freeze-injured cells grew to 10(7) and 10(8) within 5 weeks, respectively. Similar results were obtained from both methods. However, direct plating could not recover L. monocytogenes at low levels (< or = 100/25 g), whereas MPN counts were obtained at these low levels. The pH (6.22 +/- 0.10) of the chopped hams remained constant throughout the study. These results indicated that low numbers of L. monocytogenes surviving sublethal heat- or freeze-injury could initiate growth after recovery in chopped hams. The five-tube MPN method using the Fung-Yu tube was effective in enumerating both low and high levels of L. monocytogenes in food.

Electronystagmographic features in some peripheral and central vestibular disorders: application of multiple discriminant analysis of electronystagmographic parameters

In routine clinical electronystagmographic (ENG) tests (postrotatory, optokinetic, caloric and tracking tests), eye movement signals were analyzed and a multiple discriminant analysis was carried out with the aid of a microcomputer. Six parameters were selected and, based on these, two functions for discriminating between peripheral and central disorders were established. Discrimination between 35 patients with peripheral lesions and 15 patients with central lesions was made with a correct classification rate of 97.1 and 86.7%, respectively. These rates are significantly higher than that of any single ENG test analysis. Our results indicate that the clinical application of ENG can be improved by searching for more sensitive ENG parameters and adopting the comprehensive analysis approach.

In vitro hemodynamic analysis of flexible artificial ventricles

An in vitro fluid dynamic study was performed to compare the hemodynamic characteristics of a rigid and a flexible total artificial heart. The artificial ventricles were incorporated into a mock circulatory system, and pressure signals within the ventricular chamber, proximal to the inflow valve and distal to the outflow valve, were obtained. The instantaneous flow rate through the inflow and outflow valves was measured with electromagnetic flow probes. Flow visualization studies performed on the flexible ventricle suggested a vortical motion within the chamber with a smooth washout of fluid in the next pumping phase, but flow disturbances were observed near the wall of the ventricle as well as near the outflow valve. The rate of pressure increase (dP/dt) was smaller in the flexible ventricle as compared with the rigid ventricle for comparable flows and heart rates. The results of the present study indicated that the flexible ventricle with polyurethane valves, having the advantage of ease of implantation and cost savings, can be a viable alternative as a bridge to transplant.

Evaluation of a stented polyurethane mitral valve prosthesis

In the search for the perfect valve prosthesis, polyurethane has been used for its excellent physical properties, but thrombosis and embolism have been real problems. The authors investigated the performance and durability of a 23 mm vacuum formed polyurethane Tricuspid Semilunar Valve, in the mitral position. The valve was implanted in eight sheep using standard cardiopulmonary bypass and intermittent aortic cross clamping. Two early failures were due to valve tears. After modification of the manufacturing process, six further valves were implanted in six sheep. All were anticoagulated with warfarin. The valves were calcified on echocardiography and had increasing transvalvular gradients beginning 3 months postoperatively. All six survived and were killed 1-2.5 years after implantation. Despite gross calcification of the leaflets, medium-term function was good. Careful serial sections of brain showed no evidence of thromboembolism. Both kidneys contained small calcium emboli, but no evidence of infarction. Despite calcification, with good medium-term function and no cerebral emboli, this valve may find application in temporary cardiac assist devices.

Concept of a soft, compressible artificial ventricle under evaluation

This study was designed to compare the relative merits of soft and rigid artificial ventricles. A cascade mock circulation was used to measure cardiac output under different circumstances. The data show that these soft air driven ventricles show a Starling's-like response over a wider range of filling pressures than identical, but rigid, ventricles. Compression of soft ventricles by high intrathoracic pressures was simulated in vitro. Air pressures up to +20 mm Hg did not seriously affect soft ventricles. Cardiac tamponade was simulated by compressing the ventricle in a closed fluid compartment. Tamponade became severe when volume reduction of the ventricle rose to 60 ml. Hemolysis caused by soft and rigid ventricles was tested in a blood bag set-up and was 48-82% higher in the rigid ventricle, depending on the driving conditions. Possibly, this could be explained by the authors' finding that rigid ventricles showed a 20% higher intraventricular dP/dtmax value than soft ventricles. Soft ventricles were implanted in three calves as a total artificial heart (TAH). Implantation without quick connectors was easy because the surgeon could easily fold and compress the ventricles. No physiological complications of softness were observed. Blood damage in the animals was low (less than 5 mg/dl). The authors conclude that soft ventricles show distinct surgical and functional advantages over rigid ventricles.

Development of a new inflow valve for a 20cc semisoft ventricle: preliminary results

We remodeled and tested our semisoft 20cc ventricle and made a new bileaflet flap inflow valve. Housings, bases, outflow valve, and a newly designed diaphragm were all made by vacuum forming and put together by radiofrequency welding or glue. In vitro, the ventricle produced a cardiac output of 2.5 to 3.0 L/min and showed reliable durability results. Hematological testing showed no important thrombogenicity of the new valve. Cardiac output was higher than expected for the volume of the ventricle, perhaps because of stretching or flow through. Animal experiments with the left ventricular assist device (LVAD) version was done at Ohio State University. Earlier in Utah, we did 20 cc total artificial heart (TAH) implantations and LVAD experiments in lambs and recently in calves with the 60cc TAH version. A soft ventricle is easy to implant and low in production costs.

Soft artificial ventricles for infants and adults, with or without a clamshell

The quick connect system and mechanical disk valves used in total artificial hearts (TAH) are sources of thrombogenesis and blood damage. Our soft TAH, which has no quick connectors, can be squeezed and bent, making it easily implantable, and blood damage is reduced by the use of trileaflet and biflap polyurethane valves. The soft ventricles were made by vacuum forming, after which the pieces were welded together by radiofrequency heat sealing. A rapid clamshell can be pushed and slipped over the soft heart to prevent deformation of the ventricle. Three calves have had the 60 cc soft TAH implanted, both with and without a clamshell. The cardiac outputs were as high as 7 L/min, without a vacuum applied during diastole. Two lambs received the 20 cc TAH (as an acute experiment); it fit and functioned well. One healthy lamb received a 20 cc left ventricular assist device (LVAD) with a pulsating artificial atrium as a survival experiment. The lamb survived for 8 days, after which the device was removed and the lamb returned to the meadow. Thrombosis in the TAH was minimal, and the plasma free hemoglobin values in all the TAH and LVAD experiments were usually lower than 5 mg/dl and often lower than 2 mg/dl.

In vitro ultrasound characterization of a polyurethane trileaflet valve

Polyurethane synthetic trileaflet valves were compared with commercial prostheses in vitro, in a pulse duplicator using ultrasound to characterize the flow velocities and patterns. Flow-pressure drop behavior was in the middle range of other prosthetic valves. Diastolic regurgitant jets were located by color Doppler ultrasound, and there appeared to be some leakage through the leaflet fold at the commissure. Nevertheless, the closing volumes and closed valve leakage volumes were, on average, lower than other prosthetic valves. Systolic 20 Hz spectral oscillations detected with pulsed Doppler and continuous wave Doppler were attributed to leaflet flutter in the open valve.

Loss of anticoagulant effect of heparin during circulation of human blood in vitro

Device-induced thrombogenesis was studied in an in vitro model using human blood circulated through an artificial ventricle. A new constant pressure filtration technique was used to detect circulating microemboli, the activated partial thromboplastin time (APTT) test was used to monitor the blood for the presence of anticoagulant activity of heparin, and hemolysis was quantified by measuring the plasma free hemoglobin level. Circulation of blood through a 20-ml stroke volume pneumatically driven ventricle for 6-9 h resulted in a significant reduction of APTT, indicating the loss of the anticoagulant effect of heparin. Microemboli concentration was minimal until the APTT decreased below 125 s, at which time the microemboli concentration increased rapidly. This was presumed to be due to the formation of thrombi following a decrease in heparin activity. A significant increase in hemolysis was also noted when blood was pumped. None of these changes was noted in the nonpumped control blood. Spontaneous loss of heparin activity in blood circulated by a pneumatically driven pump may have clinical implications and may help understanding of the problems associated with device-induced thrombogenesis.

The return of elastomer valves

This paper concerns the heart valves to be used mainly in artificial hearts. Most of our tricusp semilunar valves are made of polyurethane. These valves have functioned in artificial hearts for up to 62 days, and have been implanted in sheep for 1 year without evidence of thromboembolism. Our valves have a wide opening, using redundant leaflets that are "bistable." Accelerated testing by air jet provides 1,000 closures per second. Regurgitation is measured in an apparatus with the help of a competent valve. All polyurethanes change with age, but Silastic does not.

New polyurethane valves in new soft artificial hearts

This article describes new bistable valves, and introduces a new soft heart that is easy to implant. Earlier, five polyurethane (PU) valves were implanted in the mitral position in sheep. All five survived for 1 year or more, and the valves, although calcified, were intact. Since the opening resistance was somewhat high, valves that are bistable were developed, which means they may be open or closed. These valves have lower opening resistance, and regurgitation is similar to that of mechanical valves. Eight calves have been implanted with a new, soft total artificial heart (TAH). Seven had bistable leaflet valves; the eighth had mechanical (Bicer) valves in the inflow position. Four of the calves were sacrificed after 22 to 43 days. At autopsy, the number of thromboemboli found, particularly in the kidneys, was low compared with previous experiments. None of these animals received anticoagulants other than the heparin given during heart/lung bypass.

In vitro comparison of velocity profiles and turbulent shear distal to polyurethane trileaflet and pericardial prosthetic valves

A comparative study of flow dynamics past biomer trileaflet valves and a pericardial bioprosthetic valve under steady and physiological pulsatile flow conditions in vitro is reported in this paper. The velocity profiles and the turbulent shear stresses distal to the valves were measured using laser Doppler anemometry. The authors' results showed that the velocity profiles distal to the trileaflet valves were similar to that measured distal to the pericardial valve. Higher magnitudes of absolute turbulent shear stresses were measured distal to the synthetic valves in comparison to the pericardial valves. However, when the stresses were nondimensionalized with respect to the orifice diameter at the inlet aspect, the stresses were comparable for all of the three valves. With design modifications to increase the orifice diameter at the inlet aspect of the polyurethane valves, the turbulent stresses distal to the valves can be minimized. Such in vitro studies on the flow dynamics past the polyurethane valves can provide information towards design changes to improve the performance characteristics of these valves. Polyurethane valves with flow characteristics comparable to the pericardial valves can be manufactured relatively inexpensively compared to mechanical or tissue valve prosthesis. Hence, the synthetic valves may be a viable alternative for short-term use in total artificial heart devices as a bridge to transplant.

Hemodynamic comparisons of polyurethane trileaflet and bioprosthetic heart valves

Hemodynamic comparison of two polyurethane prosthetic heart valves with a bioprosthetic valve is presented. The valves were incorporated in a pulse duplicator simulating physiologic pulsatile flow, and comparisons between the valves were made on the transvalvular pressure drop, percent regurgitation, valve orifice area, rate of opening and closing as well as the performance index. The results showed that the functional characteristics of the polyurethane valve compared favorably with that of the bioprosthetic valve. The polyurethane valve can be a viable and inexpensive alternative, especially for short-term use in a total artificial heart as a bridge to transplant.

Development of smaller artificial ventricles and valves made by vacuum forming

Implantable prosthetic ventricles and trileaflet valves made by vacuum forming have been developed and implant tested. All components are made from Pellethane. Recognizing the need for smaller as well as larger ventricles, designs with effective stroke volumes of 50, 85, 100 and 130 cc have been tested with several valve types. The pneumatically driven Utah ventricular assist device (UVAD) can be used as a total artificial heart (TAH) or ventricular assist device (VAD) by using the appropriate inflow and outflow adapters. In vitro durability testing has demonstrated ventricular lifetime beyond two years and valve lifetime to nearly one and one half years. The polymer valves have lower regurgitation than mechanical valves. Animal implantation experience includes 21 TAH implants and 16 left ventricular assist device (LVAD) implantations. TAH survival ranges from 2 to 210 days. LVAD animals have lived up to 116 days before elective termination. The animal were healthy and grew normally. The devices exhibit a "Starling's Law" response. One TAH animal survived 72 days before successful explantation followed by transplantation. At autopsy, this animal had no renal infarcts. Hematology data has demonstrated the existance of little or no intravascular hemolysis (PF Hb less than 5 mg%). The "Philadelphia" version of the UVAD vacuum formed ventricles are small enough to be implanted without thrombus provoking connectors. Eight animals have received this TAH and survived up to 120 days. Vacuum forming offers a rapid and inexpensive way to produce reliable and effective total artificial hearts and valves for widespread, temporary clinical application in any size adult human.