Spectral weight shift in the valence band density of states and concurrent increase in field emission by hydrogenation of FeCo–SiO2 nanocomposites

Roughened surface and enhanced valence electronic states of hydrogen plasma treated FeCo–SiO₂ nanogranular films has made it an efficient field emitter in comparison to its as-grown and furnace annealed counterparts.

Evidence for fully gapped strong coupling s-wave superconductivity in Bi4O4S3

We report on the superconducting gap and pairing symmetry in the layered superconductor Bi4O4S3. The measurement of temperature dependence of magnetic penetration depth was carried out using the tunnel diode oscillator technique. It is observed that Bi4O4S3 is a conventional s-wave type superconductor with a fully developed gap. The zero-temperature value of the superconducting energy gap Δ0 was found to be 1.54 meV, corresponding to the ratio 2Δ0/k(B)T(c) = 7.2 which is much higher than the BCS value of 3.53. In the superconducting range, superfluid density is very well described by the single gap s-wave model.

Synthesis of silver nanoparticles using haloarchaeal isolate Halococcus salifodinae BK3

Numerous bacteria, fungi, yeasts and viruses have been exploited for biosynthesis of highly structured metal sulfide and metallic nanoparticles. Haloarchaea (salt-loving archaea) of the third domain of life Archaea, on the other hand have not yet been explored for nanoparticle synthesis. In this study, we report the intracellular synthesis of stable, mostly spherical silver nanoparticles (AgNPs) by the haloarchaeal isolate Halococcus salifodinae BK3. The culture on adaptation to silver nitrate exhibited growth kinetics similar to that of the control. NADH-dependent nitrate reductase was involved in silver tolerance, reduction, synthesis of AgNPs, and exhibited metal-dependent increase in enzyme activity. The AgNPs preparation was characterized using UV-visible spectroscopy, XRD, TEM and EDAX. The XRD analysis of the nanoparticles showed the characteristic Bragg peaks of face-centered cubic silver with crystallite domain size of 22 and 12 nm for AgNPs synthesized in NTYE and halophilic nitrate broth (HNB), respectively. The average particle size obtained from TEM analysis was 50.3 and 12 nm for AgNPs synthesized in NTYE and HNB, respectively. This is the first report on the synthesis of silver nanoparticles by haloarchaea.

Mechanisms of metal resistance and homeostasis in haloarchaea

Haloarchaea are the predominant microflora of hypersaline econiches such as solar salterns, soda lakes, and estuaries where the salinity ranges from 35 to 400 ppt. Econiches like estuaries and solar crystallizer ponds may contain high concentrations of metals since they serve as ecological sinks for metal pollution and also as effective traps for river borne metals. The availability of metals in these econiches is determined by the type of metal complexes formed and the solubility of the metal species at such high salinity. Haloarchaea have developed specialized mechanisms for the uptake of metals required for various key physiological processes and are not readily available at high salinity, beside evolving resistance mechanisms for metals with high solubility. The present paper seeks to give an overview of the main molecular mechanisms involved in metal tolerance in haloarchaea and focuses on factors such as salinity and metal speciation that affect the bioavailability of metals to haloarchaea. Global transcriptomic analysis during metal stress in these organisms will help in determining the various factors differentially regulated and essential for metal physiology.

First Report of Downy Mildew (Hyaloperonospora camelinae) on Camelina sativa in Florida

Camelina sativa (L.) Crantz, Brassicaceae, whose common name is Crantz-large-seeded false flax, is an annual oilseed species. It is grown as a forage and biofuel crop in Europe and North America. False flax is an ideal low-input crop for biodiesel production, because of its low requirements for nitrogen fertilizer and pesticides. Production costs of this crop are substantially lower than those of many other oilseed crops such as rapeseed, corn, and soybean. It is an excellent rotation crop and can reduce disease and insect and weed pressure in wheat fields. During the spring of 2011, commercial and research plantings of C. sativa cultivar Calena in Liberty and Gadsden counties in north Florida developed symptoms typical of downy mildew. In spring of 2012, the same symptoms were observed in experimental plantings of false flax. A white downy mold was observed on the upper third portion of the plants, on the upper stem internodes, and on the developing seed. The affected stems exhibited a twisted growth. Conidiophores had main trunks with dichotomous branches terminating in slender curved tips. Conidia were ovoid and 28 to 45 (mean 36) μm long and 22 to 38 (mean 30) μm wide. Conidiophores were branched (three to four branches, each with six to eight curved tips) and ranged from 107 to 236 μm long and 5 to 14 μm wide. Mycelium was obtained directly from diseased plants for DNA extraction (Qiagen DNeasy Plant Mini Kit, Valencia, CA). Primers ITS1 and ITS4 were used for PCR amplification (4). The PCR product was sequenced bidirectionally with the PCR primers. A consensus nucleotide sequence (Accession JQ997103) was compared to those in the NCBI GenBank database using a BLAST search. The sequence was 99% similar to sequence from Hyaloperonospora camelinae (Gäum.) Göker, Voglmayr, Riethm, M. Weiss & Oberw. (Accession AY198249.1) with a 95% query coverage (1). Pathogenicity was established by applying white conidial masses of downy mildew from field samples to stems of 4-week-old plants grown in pots in a greenhouse maintained at 25 ± 2°C. Noninoculated plants maintained under the similar conditions served as control. Symptoms and signs of downy mildew developed after 14 days only on inoculated plants. Downy mildew constitutes a serious threat to the cultivation of C. sativa in Florida because of the humid climate favoring disease development. Diseased plants may reduce yield and disease management would increase production costs. H. camelinae was previously reported on C. sativa in Oregon, Minnesota, Montana (3), and Nebraska (2). To the best of our knowledge, this is the first report of downy mildew caused by H. camelinae on C. sativa in Florida. References: (1) M. Göker et al. Canad. J. Bot. 81:672, 2003. (2) R. M. Harveson et al. Plant Health Progress. 2011. doi: 10.1094/PHP-2011-1014-01-BR. (3) M. L. Putnam et al. Plant Health Progress. 2009. doi: 10.1094/PHP-2009-0910-01-BR. (4) T. J. White et al. Page 315 in: PCR Protocols: A Guide to Methods and Applications. M. A. Innis et al., eds. Academic Press, San Diego, 1990.

First Report of Sclerotinia Stem Rot Caused by Sclerotinia sclerotiorum on Brassica carinata in Florida

Brassica carinata A. Braun, commonly referred to as Ethiopian rapeseed, a near relative of collards and mustard, has become the object of increasing interest as an oil crop. It has been reported that B. carinata adapts better and is more productive than B. napus (canola) in adverse conditions, such as clay and sandy soils and under low management cropping systems (1). In late February 2012, symptoms typical of sclerotinia stem rot were observed in B. carinata trials (cultivars 090867 EM and 080814 EM) at the University of Florida, North Florida Research and Education Center located in Quincy, FL. Approximately 20 to 30% of the B. carinata cultivar 090867 EM were observed to have symptoms and approximately 5% of cultivar 080814 EM displayed symptoms. Stems had white mycelia growing on the outside, plants were lodging and spherical to cylindrical, 3 to 8 mm, and black sclerotia were found outside and inside bleached stems. Sclerotia from diseased stems were surface sterilized and placed in 9-cm diameter petri plates on quarter strength potato dextrose agar (PDA) amended with 25% lactic acid. Fungal cultures consisting of white mycelia and medium-sized (mean 4 mm), black, irregular sclerotia were consistently recovered and identified as Sclerotinia sclerotiorum (Lib.) de Bary based on morphological characteristics (3). Sequence analyses were conducted on mycelium by extracting fungal DNA with the Qiagen DNeasy Plant Mini Kit (Valencia, CA). PCR amplification was performed using primers ITS1 and ITS4. The BLAST search revealed that the sequence (GenBank Accession No. JX307092) had 99 and 100% sequence identity with S. sclerotiorum GenBank accessions JN013184.1 and JN012606.1. Pathogenicity was determined by inoculating six 1-month-old B. carinata plants (cultivars 090867 EM and 080814 EM) that were grown in greenhouse pots (20 cm in diameter). Mycelia plugs (8 mm in diameter) were excised from the colony margin after 6 days of incubation at room temperature (approximately 25°C), and placed on stems, at the soil line, of B. carinata plants. Six control plants were inoculated with noncolonized PDA plugs. All plants were enclosed in plastic bags that had been sprayed with water on the inside to maintain high humidity and kept in the laboratory at room temperature (approximately 25°C). Symptoms similar to those observed in the field were evident after 3 days on inoculated plants and S. sclerotiorum was reisolated. In the controls, no symptoms developed and the fungus could not be isolated. The experiment was repeated with similar results. The majority of rapeseed production is in North Dakota, where sclerotinia stem rot caused by S. sclerotiorum is a major fungal disease affecting production (2). Currently, there is no significant B. carinata production in Florida; however, interest in biofuels could lead to an increase in planted acreage and sclerotinia stem rot could become a significant disease problem in areas of Florida were B. carinata is planted. To our knowledge, this is the first report of sclerotinia stem rot of B. carinata caused by S. sclerotiorum in Florida. References: (1) M. Cardone et al. Biomass and Bioenergy. 25:623, 2003. (2) L. E. del Río et al. Plant Dis. 91:191, 2007. (3) L. M. Kohn. Phytopathology 69:881, 1979.

A predictive model for the synthesis of polylactide from lactic acid by response surface methodology

The present work describes the statistical process optimization of a lowcost production process of PLA using organometallic (stannous octoate) compounds. The process optimization for both lactide and polylactide, was developed by factorial design and response surface methodology. The influence of different experimental parameters such as reaction temperature, time, concentration of catalyst and co-initiator concentration on the yield of lactide and polylactide has been evaluated. There are many studies reported on the synthesis of polylactide but no earlier study exists for the application of statistical analysis in determining the interactions among the process variables for lactide and polylactide production. Central composite experimental design with multiple linear regression has been used to estimate the coefficients of the polynomial model equation for the yield(s) of both lactide and polylactide. The statistical significance of polynomial model equation was validated by F test (ANOVA). Determination coefficient (R2) values found to be 0.913 and 0.958 for lactide and polylactide respectively, states that predicted values were in good agreement with the experimental values. Results of the statistical analysis showed that the model fits in all cases. Above synthesised polymer was characterized by FT-IR, 1H-NMR, DSC and GPC to confirm the polymer structure and properties.

Optical and structural features of silicon-rich hydrogenated amorphous silicon nitride thin films

A systematic study of fabrication and effect of post-deposition processing on the optical and structural features of silicon-rich hydrogenated amorphous silicon nitride thin films deposited by Hg-sensitized Photo-Chemical Vapour Deposition technique is presented. Both deposition parameters and post-deposition thermal treatment resulted into substantial change in the refractive index associated with the densification of the film. Our studies reveal that the presence of hydrogen and its out-diffusion upon thermal treatment play a crucial role in the overall structural evolution, specially the stabilization of individual phases such as Si and Si3N4. We further report the room-temperature photoluminescence from as-deposited films, which is due to formation of silicon nanostructures in crystalline and amorphous forms. These studies are of great interest from the prospective of commercially viable Si-based technology.

EMS-induced cytomictic variability in safflower (Carthamus tinctorius L.)

Seeds of safflower (Carthamus tinctorius L.) were subjected to three treatment durations (3h, 5h and 7h) of 0.5 % Ethyl Methane Sulphonate (EMS). Microsporogenesis was carried out in the control as well as in the treated materials. EMS treated plants showed interesting feature of partial inter-meiocyte chromatin migration through channel formation, beak formation or direct cell fusion. Another interesting feature noticed during the study was the fusion among tetrads due to wall dissolution. The phenomenon of cytomixis was recorded at nearly all the stages of microsporogenesis connecting from a few to several meiocytes. Other abnormalities such as laggards, precocious movement, bridge and non-disjunction of chromosomes were also recorded but in very low frequencies. The phenomenon of cytomixis increased along with the increase in treatment duration of EMS. Cells with these types of cytomictic disturbances may probably result in uneven formation of gametes or zygote, heterogenous sized pollen grains or even loss of fertility in future.