51
|
Pogoda K, Charrier EE, Janmey PA. A Novel Method to Make Polyacrylamide Gels with Mechanical Properties Resembling those of Biological Tissues. Bio Protoc 2021; 11:e4131. [PMID: 34541049 DOI: 10.21769/bioprotoc.4131] [Citation(s) in RCA: 4] [Impact Index Per Article: 1.3] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 11/30/2020] [Revised: 04/05/2021] [Accepted: 05/09/2021] [Indexed: 11/02/2022] Open
Abstract
Studies characterizing how cells respond to the mechanical properties of their environment have been enabled by the use of soft elastomers and hydrogels as substrates for cell culture. A limitation of most such substrates is that, although their elastic properties can be accurately controlled, their viscous properties cannot, and cells respond to both elasticity and viscosity in the extracellular material to which they bind. Some approaches to endow soft substrates with viscosity as well as elasticity are based on coupling static and dynamic crosslinks in series within polymer networks or forming gels with a combination of sparse chemical crosslinks and steric entanglements. These materials form viscoelastic fluids that have revealed significant effects of viscous dissipation on cell function; however, they do not completely capture the mechanical features of soft solid tissues. In this report, we describe a method to make viscoelastic solids that more closely mimic some soft tissues using a combination of crosslinked networks and entrapped linear polymers. Both the elastic and viscous moduli of these substrates can be altered separately, and methods to attach cells to either the elastic or the viscous part of the network are described. Graphic abstract: Polyacrylamide gels with independently controlled elasticity and viscosity.
Collapse
|
52
|
Sun Y, Zhang S, Jin B, Cheng S. Efficient degradation of polyacrylamide using a 3-dimensional ultra-thin SnO 2-Sb coated electrode. JOURNAL OF HAZARDOUS MATERIALS 2021; 416:125907. [PMID: 34492842 DOI: 10.1016/j.jhazmat.2021.125907] [Citation(s) in RCA: 11] [Impact Index Per Article: 3.7] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 02/19/2021] [Revised: 04/13/2021] [Accepted: 04/13/2021] [Indexed: 06/13/2023]
Abstract
Polyacrylamide (PAM) is widely used in polymer flooding processes to increase oil recovery while the byproduct of PAM-containing wastewater is a serious environmental issue. In this study, electrochemical oxidation process (EAOP) was applied for treating PAM wastewater using a new type of 3-dimensional ultra-thin SnO2-Sb electrode. Nano-sized catalysts were evenly dispersed both on the surface and inside of a porous Ti filter forming nano-thickness catalytic layer that enhances the utilization and bonding of catalysts. This porous Ti electrode showed 20% improved OH· production and 16.3 times increased accelerated service life than the planar Ti electrode. Using this electrode to treat 100 mg L-1 PAM, the TOC removal efficiency reached over 99% within 3 h under current density of 20 mA cm-2. The EAOP could fastly break the long-chain PAM molecules into small molecular intermediates. With the porous electrode treating 5 g L-1 PAM under current density of 30 mA cm-2, EAOP reduced 94.2% of average molecular weight in 1 h and 92.0% of solution viscosity in 0.5 h. Moreover, the biodegradability of PAM solution was significantly improved as the solution BOD5/COD ratio raised from 0.05 to 0.41 after 4 h treatment. The degradation pathway of PAM was also investigated.
Collapse
|
53
|
Katzman D, Bohbot-Raviv Y, Dubowski Y. Does polyacrylamide-based adjuvant actually reduce primary drift of airborne pesticides? THE SCIENCE OF THE TOTAL ENVIRONMENT 2021; 775:145816. [PMID: 33631585 DOI: 10.1016/j.scitotenv.2021.145816] [Citation(s) in RCA: 8] [Impact Index Per Article: 2.7] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Received: 12/10/2020] [Revised: 02/08/2021] [Accepted: 02/08/2021] [Indexed: 06/12/2023]
Abstract
Atmospheric drift of pesticides sprayed outside treated fields may pose serious environmental and health concerns. Chemical adjuvants, among other techniques, reduce drift by modifying the physicochemical properties of the pesticide solution, which presumably produces larger droplets upon spraying that are less prone to drift. Previous studies, that have addressed the effect of adjuvants on drift reduction, mainly rely on measurements of droplet sedimentation while ignoring the presence of pesticides in the forms of small aerosols and vapor. Such forms are expected to be highly susceptible to atmospheric drift that may pose human health risk via inhalation exposure. The present study examines the effect of a polymer-based adjuvant on airborne-pesticide drift using active air sampling in two field campaigns. Surprisingly, these measurements indicate higher primary drift (PD) of airborne pesticides in the presence of adjuvant in the spraying solution. The results are further supported by comparing measured drifts to those calculated using a modified Gaussian puff dispersion model, which enabled to evaluate the impact of varying meteorological conditions during the field experiments. In addition, the adjuvant effect on droplet size distribution generated by common nozzles, was tested in a wind tunnel. The resulting size-distributions demonstrated that while the addition of adjuvant resulted in a desired shift of the volumetric distribution towards larger droplets, it also led to a significant increase in the number concentration of fine droplets. Such trends can explain how the addition of polymeric adjuvant can yield both, a reduction in sedimenting drift outside treated areas and an increase in airborne PD intensity, as observed in the present study. This study demonstrates the complex effect of chemical adjuvants and the urgent need to further explore and understand their environmental impact.
Collapse
|
54
|
Myhr SS, Rakovan M, Schiøtz HA. Periurethral injection with polyacrylamide after previous TVT surgery. Int Urogynecol J 2021; 33:1017-1022. [PMID: 34106322 DOI: 10.1007/s00192-021-04891-y] [Citation(s) in RCA: 1] [Impact Index Per Article: 0.3] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 03/26/2021] [Accepted: 05/26/2021] [Indexed: 11/26/2022]
Abstract
INTRODUCTION AND HYPOTHESIS The aim of this registry study was to assess the clinical utility of using periurethral bulking with polyacrylamide hydrogel in women with stress urinary incontinence (SUI) after previous midurethral sling surgery. METHODS The study period was 2007 through 2019. Using data from the Norwegian Female Incontinence Registry we included 57 women who had received Bulkamid® because of insufficient improvement or recurrent SUI after previous retropubic TVT surgery. The primary outcome was cure of SUI, and secondary outcomes were patient satisfaction, degree of leakage, change in urgency incontinence (UUI), free flow rate, postvoid residual volume, and complications. Descriptive statistics were used to characterize data and Wilcoxon signed-rank test to compare pre- and postoperative results for pairs, with level of significance at p < 0.05. RESULTS Pure SUI was seen in 19 (33.3%) while 38 (66.7%) had mixed incontinence. Postoperatively 72.9% had a negative stress test and 73.7% were satisfied with treatment. There was only 1 complication in 67 injections (1.5%). De novo UUI occurred in five patients, corresponding to 8.8% of the whole study group, but 26.3% among those with no preoperative UUI problems. Among the patients with preoperative UUI, 39.5% were cured of this problem and a further 36.8% were improved. CONCLUSIONS The cure rate and satisfaction rate of periurethral bulking with polyacrylamide after previous MUS are favorable and complications are rare. There seems to be a risk of overactive bladder symptoms developing in women with no such symptoms preoperatively.
Collapse
|
55
|
Hariri A, Palma-Chavez J, Wear KA, Pfefer TJ, Jokerst JV, Vogt WC. Polyacrylamide hydrogel phantoms for performance evaluation of multispectral photoacoustic imaging systems. PHOTOACOUSTICS 2021; 22:100245. [PMID: 33747787 PMCID: PMC7972966 DOI: 10.1016/j.pacs.2021.100245] [Citation(s) in RCA: 8] [Impact Index Per Article: 2.7] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Received: 10/05/2020] [Revised: 12/09/2020] [Accepted: 02/12/2021] [Indexed: 05/21/2023]
Abstract
As photoacoustic imaging (PAI) begins to mature and undergo clinical translation, there is a need for well-validated, standardized performance test methods to support device development, quality control, and regulatory evaluation. Despite recent progress, current PAI phantoms may not adequately replicate tissue light and sound transport over the full range of optical wavelengths and acoustic frequencies employed by reported PAI devices. Here we introduce polyacrylamide (PAA) hydrogel as a candidate material for fabricating stable phantoms with well-characterized optical and acoustic properties that are biologically relevant over a broad range of system design parameters. We evaluated suitability of PAA phantoms for conducting image quality assessment of three PAI systems with substantially different operating parameters including two commercial systems and a custom system. Imaging results indicated that appropriately tuned PAA phantoms are useful tools for assessing and comparing PAI system image quality. These phantoms may also facilitate future standardization of performance test methodology.
Collapse
|
56
|
Chalcarz M, Żurawski J. Injection of Aquafilling ® for Breast Augmentation Causes Inflammatory Responses Independent of Visible Symptoms. Aesthetic Plast Surg 2021; 45:481-490. [PMID: 32939601 PMCID: PMC8012309 DOI: 10.1007/s00266-020-01949-y] [Citation(s) in RCA: 17] [Impact Index Per Article: 5.7] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Grants] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 06/24/2020] [Accepted: 08/16/2020] [Indexed: 01/11/2023]
Abstract
Background A major concern related to modern surgery is to evaluate and address the complications associated with breast enlargement using Aquafilling® injection. This study aimed to assess the effect of Aquafilling® injection on immune response in such patients. Methods For four patients who consulted a surgeon after receiving Aquafilling® injection, medical history of the patients was taken; based on imaging examinations, Aquafilling® was removed. Samples were processed for histopathological and immunohistochemical examination. For detecting tissue antigens in histopathological samples, monoclonal antibodies against CD3 (lymphocytes T), CD 20 (lymphocytes B), and CD68 (macrophages) were used. By analyzing the images, the number of immune cells (lymphocytes T, lymphocytes B, and macrophages) and immunohistochemical reaction area were semiquantitatively evaluated. Results Different clinical features were observed in each patient after receiving Aquafilling® injection. In samples obtained from four patients, lymphocytes T (CD3), lymphocytes B (CD20), and macrophages (CD68) tissue expressions were observed. Statistically significant variations in the number of lymphocytes B (CD20) and macrophages (CD68), and differentiation of immunohistochemical reaction area for lymphocytes T (CD3) and lymphocytes B (CD20) were observed. Conclusions Inflammation is elevated in patients who received Aquafilling® injection. Medical imaging should be carried out in all such patients even if there are no visible symptoms. Removal of Aquafilling® can reduce the inflammation and risk of neoplastic progression in the patients. The influence of time elapsed since Aquafilling® injection and intensity of immune response requires further validation. Level of Evidence IV This journal requires that authors assign a level of evidence to each article. For a full description of these Evidence-Based Medicine ratings, please refer to the Table of Contents or the online Instructions to Authors www.springer.com/00266.
Collapse
|
57
|
Ma L, Hu T, Liu Y, Liu J, Wang Y, Wang P, Zhou J, Chen M, Yang B, Li L. Combination of biochar and immobilized bacteria accelerates polyacrylamide biodegradation in soil by both bio-augmentation and bio-stimulation strategies. JOURNAL OF HAZARDOUS MATERIALS 2021; 405:124086. [PMID: 33153796 DOI: 10.1016/j.jhazmat.2020.124086] [Citation(s) in RCA: 9] [Impact Index Per Article: 3.0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 07/08/2020] [Revised: 09/21/2020] [Accepted: 09/22/2020] [Indexed: 05/22/2023]
Abstract
Polyacrylamide (PAM) has been used extensively due to its well-known stable chemical properties, but limited information is available on the biodegradation of soil-containing PAM. In this work, sufficient degradation of PAM was achieved via the addition of the Klebsiella sp. PCX-biochar composite to PAM-containing soil, due to the synergic effect of bio-augmentation and bio-stimulation. The optimal degradation rate of 69.1% over 30-day period was observed under the following conditions: the addition of immobilized bacteria at 0.07 g/g, pH 6.6, and temperature at 38.0 °C. In this study, we showed that PAM was successfully hydrolyzed by amidase, and ammonia in the hydrolysis product was then oxidized by the nitrifying bacteria. The decrease of water-extractable organic carbon (WEOC) also demonstrated the chain cleavage in PAM. PAM was utilized as a carbon source not only by Klebsiella sp. PCX but also by some taxa from indigenous bacteria. Last but not least, it was shown in this study that biochar, even though immobilized with exogenous microorganisms, actually enhanced bacterial diversity and stimulated the growth of some indigenous PAM-degrading taxa. Based on the above observations, we concluded that PAM biodegradation via the addition of bacteria-immobilized biochar was a synergy of both bio-augmentation and bio-stimulation strategies.
Collapse
|
58
|
Ai J, Wang Z, Dionysiou DD, Liu M, Deng Y, Tang M, Liao G, Hu A, Zhang W. Understanding synergistic mechanisms of ferrous iron activated sulfite oxidation and organic polymer flocculation for enhancing wastewater sludge dewaterability. WATER RESEARCH 2021; 189:116652. [PMID: 33278721 DOI: 10.1016/j.watres.2020.116652] [Citation(s) in RCA: 8] [Impact Index Per Article: 2.7] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 09/20/2020] [Revised: 11/01/2020] [Accepted: 11/16/2020] [Indexed: 06/12/2023]
Abstract
The bound water in waste activated sludge (WAS) is trapped in extracellular polymeric substances (EPS) in the form of gel-like structure, leading to a great challenge in the sludge deep dewatering. Traditional flocculation conditioning is unable to destroy EPS and ineffective to remove the bound water in WAS. In this study, we employed integration of Fe(II)-sulfite oxidation and polyacrylamide flocculation (F/S-PAM) treatment for removing the bound water and improving sludge dewaterability under aerobic conditions. Meanwhile, the floc microstructure and EPS properties were examined to understand the mechanisms of F/S-PAM conditioning. F/S produced SO3·- radicals which could decompose the EPS in sludge, releasing bound water into free water. In addition, the formed Fe(III) from F/S led to re-coagulation of decomposed EPS, and C=O groups of tryptophan played the leading role in Fe-EPS association binding, causing transformation of the secondary structure of proteins (especially β-sheets and α-helices). Then, the introduction of PAM caused re-flocculation of disintegrated sludge flocs, enhancing the sludge filterability. This work provides a novel and cost-effective method for efficient removal of bound water in sludge, and subsequence improvement in sludge dewaterability.
Collapse
|
59
|
Labeeuw L, Commault AS, Kuzhiumparambil U, Emmerton B, Nguyen LN, Nghiem LD, Ralph PJ. A comprehensive analysis of an effective flocculation method for high quality microalgal biomass harvesting. THE SCIENCE OF THE TOTAL ENVIRONMENT 2021; 752:141708. [PMID: 32892040 DOI: 10.1016/j.scitotenv.2020.141708] [Citation(s) in RCA: 19] [Impact Index Per Article: 6.3] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 06/15/2020] [Revised: 08/12/2020] [Accepted: 08/13/2020] [Indexed: 06/11/2023]
Abstract
Flocculation is a low-cost harvesting technique for microalgae biomass production, but flocculation efficiency is species dependent. In this study, we investigated the efficacy of two synthetic (polyacrylamide) and one natural (chitosan) flocculants against three algal species: the cyanobacterium Synechocystis sp., the freshwater Chlorella vulgaris, and the marine Phaeodactylum tricornutum at laboratory and pilot scales to evaluate harvesting efficiency, biomass integrity and media recycling. Growth phase affected the harvesting efficiency of the eukaryotic microalgae. The flocculation was optimal at stationary phase with high flocculation efficiency achieved using polyacrylamides at 24-36 mg/g dry weight. The effect of the flocculants on the harvested biomass was investigated. The flocculated Synechocystis sp. showed a higher proportion of compromised cells compared to C. vulgaris and P. tricornutum likely due to differences in cell walls composition. Compromised cells could lead to the release of valuable products into the surrounding growth media during flocculation. The residual culture media was recycled once with no impact on cell growth for all treatments and algal species. The flocculation technique was demonstrated at pilot-scale using 350 L microalgal suspension, showing an efficiency of 82-90% at a polyacrylamide dosage of 6.5-10 mg/L. This efficiency and the biomass quality are comparable to the laboratory-scale results. Overall, results indicate that polyacrylamide flocculants work on a wide range of species without the need for pre-treatment. The information generated in this study can contribute to making the microalgae industry more competitive.
Collapse
|
60
|
Liu J, Liu A, Guo J, Zhou T, Zhang WX. Enhanced aggregation and sedimentation of nanoscale zero-valent iron (nZVI) with polyacrylamide modification. CHEMOSPHERE 2021; 263:127875. [PMID: 32835968 DOI: 10.1016/j.chemosphere.2020.127875] [Citation(s) in RCA: 3] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 07/02/2020] [Revised: 07/24/2020] [Accepted: 07/27/2020] [Indexed: 06/11/2023]
Abstract
Nanoscale zero-valent iron (nZVI) settled slowly and incompletely in a nano-iron reactor (NIR) in wastewater treatment, and the effluent quality and processing capacity of nZVI were degenerated. Herein, three types of polyacrylamide (PAM), anionic-APAM (nZVIAPAM), cationic-CPAM (nZVICPAM), and nonionic-NPAM (nZVINPAM)) were applied to modify the nZVI (nZVIPAM), which were proved to enhance aggregation and sedimentation in the gravity settling clarifier of NIR. PAM modification lead to aggregate by forming large agglomerates. The median sizes of aggregates were 32, 194, 168 and 133 μm respectively for nZVI, nZVICPAM, nZVINPAM, and nZVIAPAM. Under quiescent conditions, bare nZVI needed 5 min to reach sedimentation equilibrium, while nZVIPAM just within 1 min nZVICPAM settled more quickly and completely than nZVINPAM and nZVIAPAM. The Fe concentration in the dynamic flow NIR effluent could keep a low level for 8 h for nZVIPAM, while bare nZVI for 6 h. Iron concentration was 3.11, 0.037, 0.93, and 1.20 mg·L-1 for nZVI, nZVICPAM, nZVINPAM, and nZVIAPAM after 8-h-reaction. Meanwhile, the reactivity of nZVIPAM was kept much longer for lead removal in the NIR. Results demonstrated PAM modifications (especially CPAM) provided a reliable solution for nZVI aggregation and sedimentation in wastewater treatment.
Collapse
|
61
|
Properties of polyacrylamide composites reinforced by cellulose nanocrystals. Heliyon 2020; 6:e05529. [PMID: 33294677 PMCID: PMC7683315 DOI: 10.1016/j.heliyon.2020.e05529] [Citation(s) in RCA: 9] [Impact Index Per Article: 2.3] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 05/25/2020] [Revised: 09/02/2020] [Accepted: 11/12/2020] [Indexed: 12/02/2022] Open
Abstract
In this work, a series of polyacrylamide/cellulose nanocrystal (PAM/CNC) composites with a wide range of compositions were prepared by a solution casting method. Subsequently, the influence of the PAM conformation on the behaviour of the PAM/CNC composites was studied. The microstructural, thermal, and mechanical properties of the PAM/CNC composites were also investigated, as well as their flocculation and dispersion behaviour. Thermal degradation of both CNC and PAM in the composites occurred simultaneously, at a much higher temperature than the degradation of the neat CNC. By TEM and SEM, PAM globule aggregates in the PAM/CNC composites were detected. With an increase in the medium acidity, the PAM globule aggregate size of in the composites decreased. Moreover, the composite films cast from high pH solutions (extended PAM conformation) exhibited superior strength properties than those cast from low pH solutions (contracted coil PAM conformation). The PAM globule conformation provided good re-dispersibility of the freeze-dried PAM/CNC composites by preventing aggregation of the CNC particles. The PAM globule adsorption onto the CNC particles caused CNC surface hydrophobization and a decrease in their surface charge, while maintaining high colloidal stability of the CNC suspensions. Furthermore, the CNC particles with adsorbed PAM were demonstrated to be useful as emulsifiers and compatibilisers.
Collapse
|
62
|
Zhang L, Han Q, Chen S, Suo D, Zhang L, Li G, Zhao X, Yang Y. Soft hydrogel promotes dorsal root ganglion by upregulating gene expression of Ntn4 and Unc5B. Colloids Surf B Biointerfaces 2020; 199:111503. [PMID: 33338883 DOI: 10.1016/j.colsurfb.2020.111503] [Citation(s) in RCA: 5] [Impact Index Per Article: 1.3] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 10/26/2020] [Revised: 11/24/2020] [Accepted: 12/02/2020] [Indexed: 10/22/2022]
Abstract
Mechanical property is an important factor of cellular microenvironment for neural tissue regeneration. In this study, polyacrylamide (PAM) hydrogels with systematically varying elastic modulus were prepared using in situ radical polymerization. We found that the hydrogel was biocompatible, and the length of dorsal root ganglion (DRG)'s axon and cell density were optimal on the hydrogels with elastic modulus of 5.1 kPa (among hydrogels with elastic modulus between 3.6 kPa and 16.5 kPa). These DRGs also exhibited highest gene and protein expression of proliferation marker Epha4, Ntn4, Sema3D and differentiation marker Unc5B. Our study revealed the mechanism of how material stiffness affects DRG proliferation and differentiation. It will also provide theoretical basis and evidence for the design and development of nerve graft with better repair performance.
Collapse
|
63
|
Zhao X, Jiang J, Zhou Z, Yang J, Chen G, Wu W, Sun D, Yao J, Qiu Z, He K, Wu Z, Lou Z. Applying organic polymer flocculants in conditioning and advanced dewatering of landfill sludge as a substitution of ferric trichloride and lime: Mechanism, optimization and pilot-scale study. CHEMOSPHERE 2020; 260:127617. [PMID: 32683031 DOI: 10.1016/j.chemosphere.2020.127617] [Citation(s) in RCA: 3] [Impact Index Per Article: 0.8] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 06/07/2020] [Revised: 07/05/2020] [Accepted: 07/07/2020] [Indexed: 06/11/2023]
Abstract
In this study, poly dimethyl diallyl ammonium chloride (PDADMAC) and polyacrylamide (PAM) were applied to substitute ferric trichloride (FeCl3) and lime conditioning for advanced dewatering of landfill sludge (LS). Four response surface methodology (RSM) models were constructed for FeCl3-lime, FeCl3-PAM, PDADMAC-lime and PDADMAC-PAM, and identical dosages, namely 29.86, 57.91, 5.73 and 2.99 mg/g dry solids (DS) for FeCl3, lime, PDADMAC and PAM, were obtained by solving the system of four RSM equations at water content of 60% to investigate conditioning mechanisms. Compared to FeCl3-lime, PDADMAC-PAM conditioning had strong charge neutralization and bridging performance, and obtained conditioned LS with large flocs size, strong network structure and rapid dewatering rate. By integrating RSM with nonlinear programming for optimization, the total cost of PDADMAC-PAM route was saved by 7.9% and close to FeCl3-lime, and the optimized condition with dosages of 1.93 and 3.47 kg/t DS was further confirmed by pilot-scale experiments. The results indicated that PDADMAC-PAM was a feasible substitute for FeCl3-lime in sludge conditioning, and showed more advantage if dewatered sludge was further treated by incineration.
Collapse
|
64
|
Parigoris E, Dunkelmann DL, Silvan U. Generation of Giant Unilamellar Vesicles (GUVs) Using Polyacrylamide Gels. Bio Protoc 2020; 10:e3807. [PMID: 33659461 PMCID: PMC7842411 DOI: 10.21769/bioprotoc.3807] [Citation(s) in RCA: 1] [Impact Index Per Article: 0.3] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 04/29/2020] [Revised: 08/17/2020] [Accepted: 08/25/2020] [Indexed: 07/28/2023] Open
Abstract
Giant unilamellar vesicles (GUVs) are a widely used model system for a range of applications including membrane biophysics, drug delivery, and the study of actin dynamics. While several protocols have been developed for their generation in recent years, the use of these techniques involving charged lipid types and buffers of physiological ionic strength has not been widely adopted. This protocol describes the generation of large numbers of free-floating GUVs, even for charged lipid types and buffers of higher ionic strength, using a simple approach involving soft polyacrylamide (PAA) gels. This method entails glass cover slip functionalization with (3-Aminopropyl)trimethoxysilane (APTES) and glutaraldehyde to allow for covalent bonding of PAA onto the glass surface. After polymerization of the PAA, the gels are dried in vacuo. Subsequently, a lipid of choice is evenly dispersed on the dried gel surface, and buffers of varying ionic strength can be used to rehydrate the gels and form GUVs. This protocol is robust for the production of large numbers of free-floating GUVs composed of different lipid compositions under physiological conditions. It can conveniently be performed with commonly utilized laboratory reagents.
Collapse
|
65
|
Kolhe N, Zinjarde S, Acharya C. Removal of uranium by immobilized biomass of a tropical marine yeast Yarrowia lipolytica. JOURNAL OF ENVIRONMENTAL RADIOACTIVITY 2020; 223-224:106419. [PMID: 32950912 DOI: 10.1016/j.jenvrad.2020.106419] [Citation(s) in RCA: 5] [Impact Index Per Article: 1.3] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 06/03/2020] [Revised: 08/08/2020] [Accepted: 09/03/2020] [Indexed: 06/11/2023]
Abstract
A marine yeast, Yarrowia lipolytica isolated from an oil polluted sea water and shown earlier to sequester dissolved uranium (U) at pH 7.5, was utilized in the present study for developing an immobilized-cell process for U removal from aqueous solutions under batch and continuous flow through systems. In batch system, optimum biosorption conditions for U removal were assessed by investigating the effects of biomass dose, initial U concentration, contact time and pH of solution using Y. lipolytica cells immobilized in calcium alginate beads. Appreciable uranium-binding capabilities over a wide pH range (3-9) were observed with the alginate beads bearing yeast cells. Out of Langmuir and Freundlich models employed for describing the sorption equilibrium data under batch mode, uranyl adsorption followed Langmuir approach with satisfactory correlation coefficient higher than 0.9. Uranyl adsorption kinetics by Y. lipolytica entrapped in alginate beads was best described by the pseudo-second-order model. While the environmental scanning electron microscopy established the immobilization and the uniform distribution of Y. lipolytica cells in the alginate beads, the Energy Dispersive X-ray spectroscopy analysis confirmed the deposition of U in the beads following their exposure to uranyl solution. Fixed bed flow-through column comprising of Y. lipolytica biomass immobilized in polyacrylamide matrix displayed high efficacy for continuous removal of uranium at pH 7.5 up to five adsorption-desorption cycles. Adsorbed U by immobilized cells could be significantly desorbed using 0.1 N HCl. Overall, our results present the superior efficiency of immobilized Y. lipolytica biomass for U removal using batch and regenerative approaches.
Collapse
|
66
|
Dutra MAL, Marques NDN, Fernandes RDS, de Souza Filho MDSM, Balaban RDC. ECO-FRIENDLY hybrid hydrogels for detection of phenolic RESIDUES in water using SERS. ECOTOXICOLOGY AND ENVIRONMENTAL SAFETY 2020; 200:110771. [PMID: 32464443 DOI: 10.1016/j.ecoenv.2020.110771] [Citation(s) in RCA: 11] [Impact Index Per Article: 2.8] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 04/06/2020] [Revised: 05/13/2020] [Accepted: 05/15/2020] [Indexed: 06/11/2023]
Abstract
Herein is presented a simple and sensible method to determine organic pollutants in water, based on the utilization of silver nanoparticles (AgNPs) loaded in Polyacrylamide (PAAm)/starch hybrid hydrogels combined with surface-enhanced Raman scattering (SERS) spectroscopy. The materials were characterized by swelling degree studies, UV-Visible spectroscopy (UV-Vis), X-ray diffraction (XRD) and scanning electron microscopy (SEM). PAAm/starch hydrogels showed variable swelling capacity, according to the synthetic molar composition. The most promising results were attributed to lower concentrations of starch and crosslink agent (N,N'-methylenebisacrylamide - MBA). Spectroscopic analysis confirmed the formation of AgNPs, by noticing the peak at around 420 nm, due to its surface plasmon resonance (SPR) effect. The results showed that AgNPs were stabilized by hydrogels networks. The average size of the AgNPs was smaller than 100 nm and the size and quantity of nanoparticles were influenced by the molar composition of the hydrogel matrix. The SERS substrate based on the AgNPs-PAAm/starch exhibited reproducibility, stability, and limit of detection (LOD) of phenol in water of 1 × 10-8 M. The average mass of AgNPs-PAAm/starch hydrogels used for each detection analysis was around 10 mg. The spectra with enhanced intensities were possible due to a large number of hot spots generated on the AgNPs-PAAm/starch hydrogel substrate, which leads to potential use for organic pollutant detection. In addition, there is also the possibility of reusing the hydrogel matrix substrate in other analyzes.
Collapse
|
67
|
Rivero CW, De Benedetti EC, Sambeth J, Trelles JA. Biotransformation of cladribine by a nanostabilized extremophilic biocatalyst. J Biotechnol 2020; 323:166-173. [PMID: 32841608 DOI: 10.1016/j.jbiotec.2020.08.012] [Citation(s) in RCA: 3] [Impact Index Per Article: 0.8] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 04/27/2020] [Revised: 08/01/2020] [Accepted: 08/19/2020] [Indexed: 12/19/2022]
Abstract
Cladribine (2-chloro-2'-deoxy-β-d-adenosine) is a 2'-deoxyadenosine analogue, approved by the FDA for the treatment of hairy cell leukemia and more recently has been proved for therapeutic against many autoimmune diseases as multiple sclerosis. The biosynthesis of this compound using Thermomonospora alba CECT 3324 as biocatalyst is herein reported. This thermophilic microorganism was successfully entrapped in polyacrylamide gel supplemented with nanoclays such as bentonite. The immobilized biocatalyst (T. alba-Ac-Bent 1.00 %), was able to biosynthesize cladribine with a conversion of 89 % in 1 h of reaction and retains its activity for more than 270 reuses without significantly activity loss, showing better operational stability and mechanical properties than the natural matrix. A microscale assay using the developed system, could allow the production of at least 181 mg of cladribine in successive bioprocesses.
Collapse
|
68
|
3D Microwell Platforms for Control of Single Cell 3D Geometry and Intracellular Organization. Cell Mol Bioeng 2020; 14:1-14. [PMID: 33643464 DOI: 10.1007/s12195-020-00646-9] [Citation(s) in RCA: 1] [Impact Index Per Article: 0.3] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 03/29/2020] [Accepted: 08/11/2020] [Indexed: 12/17/2022] Open
Abstract
Introduction Cell structure and migration is impacted by the mechanical properties and geometry of the cell adhesive environment. Most studies to date investigating the effects of 3D environments on cells have not controlled geometry at the single-cell level, making it difficult to understand the influence of 3D environmental cues on single cells. Here, we developed microwell platforms to investigate the effects of 2D vs. 3D geometries on single-cell F-actin and nuclear organization. Methods We used microfabrication techniques to fabricate three polyacrylamide platforms: 3D microwells with a 3D adhesive environment (3D/3D), 3D microwells with 2D adhesive areas at the bottom only (3D/2D), and flat 2D gels with 2D patterned adhesive areas (2D/2D). We measured geometric swelling and Young's modulus of the platforms. We then cultured C2C12 myoblasts on each platform and evaluated the effects of the engineered microenvironments on F-actin structure and nuclear shape. Results We tuned the mechanical characteristics of the microfabricated platforms by manipulating the gel formulation. Crosslinker ratio strongly influenced geometric swelling whereas total polymer content primarily affected Young's modulus. When comparing cells in these platforms, we found significant effects on F-actin and nuclear structures. Our analysis showed that a 3D/3D environment was necessary to increase actin and nuclear height. A 3D/2D environment was sufficient to increase actin alignment and nuclear aspect ratio compared to a 2D/2D environment. Conclusions Using our novel polyacrylamide platforms, we were able to decouple the effects of 3D confinement and adhesive environment, finding that both influenced actin and nuclear structure.
Collapse
|
69
|
One-step synthesis of hydrophilic microspheres for highly selective enrichment of N-linked glycopeptides. Anal Chim Acta 2020; 1130:91-99. [PMID: 32892942 DOI: 10.1016/j.aca.2020.07.049] [Citation(s) in RCA: 6] [Impact Index Per Article: 1.5] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 04/06/2020] [Revised: 07/17/2020] [Accepted: 07/19/2020] [Indexed: 11/22/2022]
Abstract
A polyacrylamide-based hydrophilic microsphere with a lot of hydroxyl groups on surface (PAM-OH HMS) was prepared in one step. The synthetic process was simple reverse suspension polymerization without any chemical derivation or grafting steps. The properties of obtained HMS were characterized by scanning electron microscopy (SEM), static water contact angle measurement, and FT-IR. The abundant hydroxyl groups on the surface make the material highly good hydrophilic and thus it was utilized for N-glycopeptides enrichment. The enrichment efficiency of PAM-OH HMSs was demonstrated by capturing N-linked glycopeptides from tryptic digest of human immunoglobulin G (IgG). The detection sensitivity for N-glycopeptides identification by MALDI-TOF MS was as low as 10 fmol for tryptic digest of standard human IgG. The selectivity of the HMS towards N-glycopeptides had almost no decrease when the molar ratio of BSA tryptic digest to IgG tryptic digest was increased from 10:1 to 100:1. Moreover, in the LC-MS/MS analysis of real biological sample, a total of 344 unique N-glycosites in 598 unique N-glycopeptides from 172 N-glycoproteins were identified from 2 μL human serum after deglycosylated by PNGase F, and 825 intact N-glycopeptides with different types of glycoform were detected when directly analyzed the N-glycopeptides enriched by PAM-OH HMS. To show the potential of our material in solving real biological issues, N-glycopeptides in the serum from hepatocelluar carcinoma (HCC) patient and health control were enriched and quantified. All the experiments demonstrated that this polyacrylamide-based hydrophilic microsphere shows a great potential to enrich the low-abundance N-glycopeptides for glycoproteome analysis of real complicated biological samples.
Collapse
|
70
|
Binaeian E, Babaee Zadvarzi S, Yuan D. Anionic dye uptake via composite using chitosan- polyacrylamide hydrogel as matrix containing TiO 2 nanoparticles; comprehensive adsorption studies. Int J Biol Macromol 2020; 162:150-162. [PMID: 32565298 DOI: 10.1016/j.ijbiomac.2020.06.158] [Citation(s) in RCA: 33] [Impact Index Per Article: 8.3] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 04/07/2020] [Revised: 06/16/2020] [Accepted: 06/16/2020] [Indexed: 01/22/2023]
Abstract
In the present study, TiO2 nanoparticles dispersed in chitosan grafted polyacrylamide matrix (TiO2-PAM-CS) was synthesized using in situ technique, and applied for the uptake of Sirius yellow K-CF dye from aqueous solution. The synthesized nano-composite was characterized by FE-SEM, TEM, XRD and FT-IR analysis. The effect of significant parameters such as pH, dose, time and temperature in batch adsorption experiments were investigated. The adsorption process was pH dependent and the optimum value of pH was obtained 2 with 96.81% dye removal at 40 °C. The equilibrium data were compatible well with the Langmuir isotherm having qm value of 1000 mg/g. The Dubinin-Radushkevich (D-R) isotherm and thermodynamic studies prove that the adsorption is physical, endothermic and spontaneous. Kinetic study also verifies that pseudo second order kinetic model is the predominant model. The interactions between amin groups of polyacrylamide-chitosan (PAM-CS) composite in from of NH3+ and molecules of anionic dye via hydrogen bond formation (Dye-NH3+), also electrostatic interactions between Ti+4 available in PAM-CS composite and anionic dye (free energy of 1.66 kJ/mol calculated from D-R model) govern the adsorption mechanism. The reusability test showe that TiO2-PAM-CS composite can be renewed easily with HCl solution as an efficient adsorbent for practical wastewater treatment.
Collapse
|
71
|
Kumar A, Bhardwaj NK, Singh SP. Polyacrylamide stabilized alkenyl succinic anhydride emulsion as sizing agent for various cellulosic pulps and fillers. Carbohydr Polym 2020; 236:116069. [PMID: 32172884 DOI: 10.1016/j.carbpol.2020.116069] [Citation(s) in RCA: 4] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 08/22/2019] [Revised: 02/22/2020] [Accepted: 02/24/2020] [Indexed: 11/29/2022]
Abstract
Cellulosic fiber is hydrophilic in nature and making it hydrophobic represents a process called sizing in papermaking. Alkenyl succinic anhydride (ASA) sizing is dominating over other sizing processes due to its high reactivity and economy. The shelf life of conventionally used cationic starch (CS) stabilized ASA emulsion is 20-25 min. In our previous study, the ASA emulsion was found to be stable up to 4 h using anionic polyacrylamide (APAM) as stabilizer. Present communication was aimed to utilize, the APAM stabilized ASA emulsion with most commonly utilized cellulosic pulps (mixed hardwood, bagasse and recycled) and fillers to assist its commercial utilization in papermaking. APAM stabilized ASA emulsion facilitated back water utilization with improved sizing degree unlike CS based ASA emulsion. Lower amount of ASA sizing was required in bagasse pulp compared to other pulps which might be attributed to low crystallinity ratios and hydrogen bond energy.
Collapse
|
72
|
Li D, Gao H, Li M, Chen G, Guan L, He M, Tian J, Cao R. Nanochitin/metal ion dual reinforcement in synthetic polyacrylamide network-based nanocomposite hydrogels. Carbohydr Polym 2020; 236:116061. [PMID: 32172876 DOI: 10.1016/j.carbpol.2020.116061] [Citation(s) in RCA: 13] [Impact Index Per Article: 3.3] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 10/12/2019] [Revised: 02/20/2020] [Accepted: 02/21/2020] [Indexed: 12/11/2022]
Abstract
Nanocomposite hydrogels consisting of a synthetic matrix reinforced by nanosized crystalline polysaccharides offer significant potential in various fields. Different from nanocellulose, the combination of nanochitin with synthetic polymers to obtain nanocomposite hydrogels has not been extensively and systematically studied. Herein, a physically and chemically dual crosslinked nanocomposite hydrogel was successfully synthesized, where chitin nanowhiskers (ChNWs) and Zn2+ were incorporated within polyacrylamide (PAAm) matrix. Nanochitin/metal ion dual reinforcement imparts increased elasticity, enhanced mechanical properties, and improved recovery performance to PAAm network. The PAAm/ChNWs/Zn2+ hydrogel could be stretched to over 13 times its original length with tensile strength of 321.9 ± 8.2 kPa, and restore its original shape rapidly even when compressed at a strain of 95% with a corresponding compressive strength of 6.95 ± 0.20 MPa. The multiple crosslinks and interactions among ChNWs, Zn2+ and synthetic polymeric network were investigated. Moreover, the hydrogel was applied in drug release and soft bioelectronics.
Collapse
|
73
|
Zheng M, Huang Z, Ji H, Qiu F, Zhao D, Bredar ARC, Farnum BH. Simultaneous control of soil erosion and arsenic leaching at disturbed land using polyacrylamide modified magnetite nanoparticles. THE SCIENCE OF THE TOTAL ENVIRONMENT 2020; 702:134997. [PMID: 31726340 DOI: 10.1016/j.scitotenv.2019.134997] [Citation(s) in RCA: 6] [Impact Index Per Article: 1.5] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Received: 04/21/2019] [Revised: 10/09/2019] [Accepted: 10/14/2019] [Indexed: 06/10/2023]
Abstract
Rapid urbanization and human disturbance of land often results in serious soil erosion and releases of fine sediments and soil-bound toxic metals/metalloids. Yet, technologies for simultaneously controlling soil erosion and metals/metalloids leaching have been lacking. This study developed a new class of polyacrylamide-dispersed magnetite (PAM-MAG) nanoparticles and tested the effectiveness for simultaneous control of soil erosion and arsenic leaching from a model soil. Two parallel box test setups (L × W × H: 91.4 × 30.5 × 7.6 cm) were constructed to test the releases of sediments and soluble pollutants from the surface soil under simulated rainfall conditions (intensity = 11.15 cm/hr). A sandy loam soil from a local quarry mining site was used as the model soil, and arsenate As(V) as a prototype leachable metalloid. A stable dispersion of PAM-MAG was prepared with 0.3 wt% of PAM and 0.1 g/L as Fe of magnetite. The results indicated that treating the soil with 5.985 g/m2 of PAM-MAG was able to decrease cumulative soil mass loss in the runoff by 90.8% (from 254.50 ± 0.10 g to 23.35 ± 3.19 g), or turbidity of the runoff by 79.9% (from 244.5 ± 27.5 NTU to 49.2 ± 22.5 NTU). Compared to PAM only, the PAM-MAG suspension showed a 30% reduction of viscosity, allowing for easier application and transport of the nanoparticles in soil. Concurrently, the PAM-MAG treatment also immobilized 82.5% of water-leachable arsenate compared to untreated controls. Fourier-transform infrared (FTIR) spectroscopy analyses revealed that arsenate was immobilized by magnetite nanoparticles through inner sphere surface complexation (Fe-O-As). Overall, the PAM-MAG based technology holds the promise for simultaneously controlling soil erosion and metal/metalloid releases from disturbed land.
Collapse
|
74
|
Abstract
Microbial whole cells are efficient, ecological, and low-cost catalysts that have been successfully applied in the pharmaceutical, environmental, and alimentary industries, among others.Microorganism immobilization is a good way to carry out the bioprocess under preparative conditions. The main advantages of this methodology lie in their high operational stability, easy upstream separation, and bioprocess scale-up feasibility.Cell entrapment is the most widely used technique for whole cell immobilization. This technique-in which the cells are included within a rigid network-is porous enough to allow the diffusion of substrates and products, protects the selected microorganism from the reaction medium, and has high immobilization efficiency (100% in most cases).
Collapse
|
75
|
Chen W, Rong X, Peng J, Tang Q, Luo H, Fan L, Feng K, Zheng H. Assessment of a novel nanostructured flocculant with elevated flocculation and antimicrobial activity. CHEMOSPHERE 2020; 239:124736. [PMID: 31494326 DOI: 10.1016/j.chemosphere.2019.124736] [Citation(s) in RCA: 10] [Impact Index Per Article: 2.5] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 07/13/2019] [Revised: 08/22/2019] [Accepted: 08/30/2019] [Indexed: 06/10/2023]
Abstract
In this work, a novel process involving the preparation of nanochitosan-grafted flocculants (CPAM-g-NCS) to treat low turbid and salmonella suspensions simultaneously was introduced. Nanotechnology was employed to enhance the adsorption-adhesion and sterilization abilities of dual-functional flocculants. The monomers of chitosan, acrylamide, methacryloyl ethyl trimethyl ammonium chloride, and sodium tripolyphosphate were utilized for flocculants copolymerization. Then, using fourier-transform infrared spectroscopy, nuclear magnetic resonance hydrogen spectrum, and thermogravimetric and differential scanning calorimetry analysis, the successful synthesis of CPAM-g-NCS was verified. Scanning electron microscopy and size analysis suggested that nanostructured flocculants with irregular morphology and nanocolloids of 60.44 nm were formed. CPAM-g-NCS was applied to treat a series of simulated low turbid and salmonella suspensions. The simulation results showed that the minimum residual turbidity of 1.97 NTU and optical density of 0.16 (initial 0.89) can be achieved at dosages of 2.5 and 8.75 mg L-1, respectively, which were superior to conventional organics flocculants. Mechanistic studies suggested that the excellent adsorption property, and large numbers of quaternary ammonium and amino groups of nanoflocculants contributed to the superior flocculation and antibacterial performance of CPAM-g-NCS.
Collapse
|