Action of xyloglucan hydrolase within the native cell wall architecture and its effect on cell wall extensibility in azuki bean epicotyls

Xyloglucan hydrolase (XGH) has recently been purified from the cell wall of azuki bean (Vigna angularis Ohwi et Ohashi) epicotyls as a new type of xyloglucan-degrading enzyme [Tabuchi et al. (2001) Plant Cell Physiol. 42: 154]. In the present study, the effects of XGH on the mechanical properties of the cell wall and on the level and the molecular size of xyloglucans within the native wall architecture were examined in azuki bean epicotyls. When the epidermal tissue strips from the growing regions of azuki bean epicotyls were incubated with XGH, the mechanical extensibility of the cell wall dramatically increased. XGH exogenously applied to cell wall materials (homogenates) or epidermal tissue strips decreased the amount of xyloglucans via the solubilization of the polysaccharides. Also, XGH substantially decreased the molecular mass of xyloglucans in both materials. These results indicate that XGH is capable of hydrolyzing xyloglucans within the native cell wall architecture and thereby increasing the cell wall extensibility in azuki bean epicotyls.

Comparison of classical and ultrasound-assisted isolation procedures of cellulose from kenaf (Hibiscus cannabinus L.) and eucalyptus (Eucalyptus rodustrus Sm.)

A comparative study of classical and ultrasound-assisted extraction and purification of cellulose from kenaf (Hibiscus cannabinus L.) and eucalyptus (Eucalyptus rodustrus Sm.), has been conducted. The isolated cellulose samples were studied by diffuse reflectance infrared Fourier transform spectroscopy and 13C nuclear magnetic resonance (13C-NMR) spectroscopy and the crystallinity was also determined. The use of ultrasound decreased the total time of treatment, in addition the purity of the obtained cellulose was very high.

Use of molecular-genetically bred Coprinus cinereus strains for an efficient isolation of cellulose from rice straw

Molecular-bred Coprinus cinereus monokaryotic strains with high lignin- and xylan-degrading activities were mixed-cultured at 27 degrees C in the liquid medium containing 0.5% (w/v) cut rice straw and 0.025% MnCl2. After 3 weeks, the culture supernatant was extensively treated with crude cellulase, showing the presence in it of 9.3% of the total cellulose of rice straw. When rice straw treated with 0.1 N NaOH or cultured with Ganoderma applanatum were used, the recoveries of the cellulose increased up to 29%. The same experiments were done by using a non-bred control strain, showing the recoveries of the cellulose from the treated or cultured rice straw to be 8%.

[Isolation and characterization of holocellulose from Alfalfa]

Holocellulose isolated from the aerial parts of alfalfa (Medicago sativa) contains a polysaccharide complex of cellulose and hemicelluloses, the major structural components of cell walls. Holocellulose is highly hydrophilic and has a dense biopolymer packing. The carboxylic groups of hemicelluloses and cellulose determines the ability of holocellulose to adsorb polyvalent metal cations.

Purification of polymeric biomaterials

Employing a combined filtration and precipitation method, the endotoxin concentration in sodium alginate (SA) and sodium cellulose sulfate (SCS) was reduced to a value of 200 EU/g polymer. This is one tenth of the regulatory threshold calculated, for example, for an appropriate bioartificial pancreas that consists of approximately 420,000 encapsulated islets of Langerhans. The low endotoxin (ET) levels were maintained below this threshold during a six-month storage period. The purification procedure of the polymers did not negatively influence the final microcapsule properties. The mechanical stability of microcapsules from purified material is even slightly higher than that of microcapsules from the original polymers. A second approach to avoid endotoxin release from the device is its direct complexation during the bead or capsule formation process. The durability of endotoxin binding in binary, ternary, and quaternary complexes could be demonstrated for storage in culture medium and saline. Very low total endotoxin release from the complexes was detected after three months in culture medium and five months in saline. This complexation is primarily based on electrostatic interactions with the participating cationic components and provides additional security for the final bioartificial organ or delivery device.

A hemicellulose B fraction from grape skin (Vitis vinifera, Palomino variety)

The structure of a hemicellulose B fraction (B-1) isolated from grape skins (Vitis vinifera) of the Palomino variety has been studied by methylation analysis, (1)H NMR and (13)C NMR spectroscopy, and partial acid hydrolysis. Hemicellulose B-1 appeared to be homogeneous by gel filtration with a weight-average molecular weight of 22 600. This polysaccharide is a linear xyloglucan chain composed of xylopyranosyl and glucopyranosyl residues linked by beta-(1-->4) glycosidic bonds. Attached to this backbone, 4-O-methyl-D-glucuronopyranosyl acid, D-glucopyranosyl, and L-fucopyranosyl residues occur at position 2 in a ratio of one residue for every five units of xylose in the main chain, with D-xylopyranosyl residues attached at position 6 of glucose units in a ratio of one residue for every two glucose-derived moieties in the main chain.

Investigation of aqueous biphasic systems for the separation of lignins from cellulose in the paper pulping process

In efforts to apply a polymer-based aqueous biphasic system (ABS) extraction to the paper pulping process, the study of the distribution of various lignin and cellulosic fractions in ABS and the effects of temperature on system composition and solute partitioning have been investigated. The partitioning of three lignin species (Indulin AT, Indulin C, and Reax 85A) have been studied in ABS prepared from stock solutions of 40% (w/w) poly(ethylene glycol) (PEG)-2000 and increasing concentrations of K2CO3, (NH4)2SO4, and NaOH. The partitioning of these lignins is affected by the free energy of hydration of the salt forming the ABS, the tie line length, and the dissociation of the sulfonic acid and hydroxyl groups of the distributed solutes. The partitioning of fibrous cellulose and diethylaminoethyl cellulose have been studied in 40% (w/w) PEG-2000-(NH4)2SO4 ABS. The hydrophilic nature of these species is important in terms of their phase preference when designing a polymer-based aqueous biphasic extraction process for use in a paper pulping process. Both cellulosic samples do not dissolve, but rather report to the salt-rich phase of an ABS. In both chemical pulping and Organosolv pulping, temperatures in excess of 120 degrees C are needed to solubilize the lignin from the cellulose fraction of wood. To study the effects of temperature on the phase diagram and solute partitioning, phthalic acid and NH499TcO4 (as system probes) have been partitioned in 40% (w/w) PEG-2000-(NH4)2SO4 ABS at known tie line lengths as a function of temperature. Temperature does not appear to affect the partitioning results beyond the expected increase in phase divergence as temperature is increased. The PEG-2000 polymer itself appears to be stable to chemical pulping conditions.

Cellulose powder from Cladophora sp. algae

The surface are and crystallinity was measured on a cellulose powder made from Cladophora sp. algae. The algae cellulose powder was found to have a very high surface area (63.4 m2/g, N2 gas adsorption) and build up of cellulose with a high crystallinity (approximately 100%, solid state NMR). The high surface area was confirmed by calculations from atomic force microscope imaging of microfibrils from Cladophora sp. algae.

The role of solid state 13C NMR spectroscopy in studies of the nature of native celluloses

Published spectroscopic observations pertaining to the crystal structure of native celluloses are reviewed for the purpose of defining our current level of understanding about crystalline polymorphism in these materials. Emphasis is placed on observations from solid state 13C nuclear magnetic resonance (NMR), which first led to the postulate that most native, semicrystalline celluloses are composites of two crystalline allomorphs, labeled Ialpha and Ibeta. Historical background is presented, highlighting the structural controversies which mainly arose because different native celluloses were used, each one representing a different mixture of allomorphs. Input from Raman, infrared (IR) and electron diffraction data is included in the discussion of our current understanding of polymorphism in native celluloses. Also noted is the input from more recently studied celluloses (e.g., Halocynthia) as well as from newer processes that convert the Ialpha to the Ibeta form. On the basis of Raman and IR observations, it is argued that the Ialpha and Ibeta allomorphs differ in hydrogen bonding patterns only and that backbone conformations are nearly identical. Also, the point is made that the absence of correlation field splittings in the Raman spectra calls into question (although it does not disprove) whether the normal two-chain-per-unit-cell, monoclinic Ibeta allomorph really possesses two equivalent chains. Considerable discussion is devoted to the allomorphic composition of cellulose crystallites in higher plants. Published methods of NMR lineshape analysis for the higher plant celluloses are reviewed and critiqued, both from the point of view of lineshape theory and from the point of view of self-consistency of inferences that are based on lineshape analyses for different carbons (particularly C1 and C4). It is concluded that higher plant celluloses most likely possess a minor amount of the Ialpha allomorph where the Ialpha/Ibeta ratio is probably less than 0.25.

Almost pure I(alpha) cellulose in the cell wall of Glaucocystis

Crystalline features of cellulose microfibrils in the cell walls of Glaucocystis (Glaucophyta) were studied by combined spectroscopy and diffraction techniques, and the results were compared with those of Oocystis (Chlorophyta). Although these algae are grouped into two different classes, by the composition of their chloroplasts for instance, their cell walls are quite similar in size and morphology. The most striking features of their cellulose crystallites are that they have the highest cellulose I(alpha) contents reported to date. In particular, the I(alpha) fraction of cellulose from Glaucocystis was found to be as high as 90% from (13)C NMR analysis. The mode of preferential orientation of cellulose crystallites in their cell walls is also interesting; equatorial 0.53-nm lattice planes were oriented parallel to the cell surface in the case of Glaucocystis, while the 0.62-nm planes were parallel to the Oocystis cell surface. Such a structural variation provides another link to the evolution of cellulose structure, biosynthesis, and its biocrystallization mechanism.

Proton spin-lattice relaxation time measurements of solid wood and its constituents as a function of pH: part II

The proton spin-lattice relaxation times (T1H) for isolated cuoxam lignin and fully bleached cellulose were measured as a function of pH in the solid-state. These experiments provided the opportunity to examine for possible macromolecular connectivities that may be present between lignin and carbohydrates within softwood. These studies have shown that the molecular mobilities of the isolated polymeric constituents of wood are affected by the ionization of their functional groups at different pHs. The shapes of the plots of T1H as a function of pH for the two isolated polymers were dramatically different, while those for softwood were similar. This fact provides evidence supporting the notion that in wood, lignin and carbohydrates are intimately associated with each other.

Estimation of the lateral dimensions of cellulose crystallites using 13C NMR signal strengths

Differences in proton rotating-frame spin relaxation rates were exploited to edit the 13C NMR spectra of solid lignocellulosics, separating signals assigned to cellulose crystallites from signals assigned to amorphous material. Clusters of signals at 89 and 85 ppm were assigned to C-4 in the interiors and on the surfaces of cellulose crystallites, respectively. Relative signal areas were used to estimate the weight-averaged lateral dimensions of crystallites, using a model in which crystallites have approximately square cross sections. The same 10 samples were also characterized by wide-angle X-ray scattering (WAXS). There was a strong correlation (r2 = 0.988) between the two sets of lateral dimensions, but those estimated by WAXS were typically 10% lower than those estimated by NMR. The deviations were attributed to differences in molecular conformations between interior and surface chains, causing broadening of the WAXS peaks. In the case of an eleventh sample containing well-ordered xylan, the NMR and WAXS methods were in good agreement only after exclusion of a xylan signal at 82.6 ppm from the NMR data.

CP/MAS 13C-NMR spectroscopy applied to structure and interaction studies on cellulose I

Solid-state Cross-Polarization Magic Angle Spinning Carbon-13 Nuclear Magnetic Resonance (CP/MAS 13C-NMR) has been used to investigate the structure and interactions of cellulose I. The use of spectral fitting for the extraction of information from CP/MAS 13C-NMR spectra is reviewed and results obtained are discussed. Examples are shown where the method has been used to monitor the structural changes occurring in wood cellulose during kraft pulping. The effects observed on the cellulose and hemicelluloses are further investigated using a model system. Assignments of signal intensities originating from xylan-cellulose interactions are made.

Fractionation of sugar beet pulp into pectin, cellulose, and arabinose by arabinases combined with ultrafiltration

Incubation of beet pulp with two arabinases (alpha-L-arabinofuranosidase and endo-arabinase), used singularly or in combination at different units of activity per gram of beet pulp, caused the hydrolysis of arabinan, which produced a hydrolyzate consisting mainly of arabinose. Pectin and a residue enriched with cellulose were subsequently separated from the incubation mixture. The best enzymatic hydrolysis results were obtained when 100 U/g of beet pulp of each enzyme worked synergistically with yields of 100% arabinose and 91.7% pectin. These yields were higher than those obtained with traditional chemical hydrolysis. The pectin fraction showed a low content of neutral sugar content and the cellulose residue contained only a small amount of pentoses. Semicontinuous hydrolysis with enzyme recycling in an ultrafiltration unit was also carried out to separate arabinose, pectin, and cellulose from beet pulp in 7 cycles of hydrolysis followed by ultrafiltration. The yields of separation were similar to those obtained in batch experiments, with an enzyme consumption reduced by 3.5 times and some significant advantages over batch processes.

Structure of an extracellular mannosylated cellulose produced by a mutant strain of Xanthomonas campestris

Structural studies were performed in two atypical polysaccharides, PS-1 and PS-2 isolated from the broth of a Tn5 mutant strain of Xanthomonas campestris. Sugar composition, methylation and nuclear magnetic resonance analyses were determined. PS-1 is composed by repeating trisaccharide units containing D-glucose, D-mannose and having the structure. carbohydrate sequence [see text]. Preliminary studies on the PS-2 show a polymer composed in a large extent of rhamnose. Unexpectedly, this polysaccharide is soluble in alcoholic solutions.

Characterization of microbial cellulose from a high-producing mutagenized Acetobacter pasteurianus strain

A wild-type Acetobacter pasteurianus was subjected to chemical mutagenesis for the induction and isolation of a cellulose overproducing strain. A mutagenized strain capable of synthesizing double amounts of cellulose compared to the wild type was obtained. Cellulose, both from the wild-type and the mutagenized strain, was extracted and purified for chemical characterization and investigation of its physico-chemical properties. The comparison of the two microbial polysaccharides shows that the putative mutation of A. pasteurianus strain had no effect on some cellulose features such as chemical structure, polymorphic form, crystallinity.

[Composition, physico-chemical properties and molecular superstructure of dietary fiber preparations of the cellan type]

Dietary fiber preparations of "cellan" type were prepared from apples, white cabbage, sugar beet pulp, soy hulls and wheat bran by treatment with amylolytic and proteolytic enzymes as well as by chemical extractions. Scanning electron microscopic examinations show different morphological structures of the preparations and a high maintenance of native biomolecular superstructure. The content of pectin, protein, polysaccharide-hexoses and -pentoses and the composition of monosaccharides (also after their treatment with 4 or 8% sodium hydroxide) were determined. The cellans possess waterbinding capacities (WBC) between < 10 and > 25 g H2O/g and waterholding capacities between < 10 and > 50 g H2O/g. The WBC is related to the internal surface; it diminishes after treatment with NaOH. The interactions between the cellans and the adsorbed water were characterized by NMR-spin-lattice relaxation time T1. The molecular mobility increases as the water content grows. The T1-values of dried cellans decreased with increasing degree of moisture before drying. The supermolecular structure is comparatively disordered. Only in case of soy cellan a crystalline cellulose-I-modification could be identified by X-ray-diffraction pattern, esp. after NaOH treatment. The low degree of order of cellans was observed in the 13C-NMR spectra, too. Only the soy hull preparation resulted in a spectrum corresponding to well-ordered cellulose. The botanic source has an essential influence on the physico-chemical properties of dietary fiber preparations of cellan type.

Formation, derivatization and applications of bacterial cellulose

Acetobacter xylinum produces highly crystalline cellulose extracellularly using glucose as a carbon source. The polymer formed is free of other biogenic compounds, separable in a simple way and characterized by its high water-absorption capacity. Stepwise solvent exchange from water to unpolar solvents leads to a drastic decrease of the water content of the bacterial cellulose without decrease of the highly swollen and activated state. Heterogeneous as well as homogeneous derivatizations, e.g. carboxymethylation, silylation and acetylation, were performed on the wet or dried biopolymer. Furthermore, different methods for formation of hollow fibres during biosynthesis were investigated. Such tubes may have applications as biocompatible material in medicine.

The toxicity of purified cellulose in studies with laboratory animals

The available literature has been reviewed for studies in laboratory animals using purified cellulose, as the production of purified cellulose may result in trace organochlorine contamination. The chronic ingestion of purified cellulose over the entire lifespans in rats and mice does not result in any increase in spontaneous disease or neoplasia. Further, purified cellulose does not display promotional activity in the mammary gland, the colon, or the bladder of rats and does not significantly alter the absorption or the metabolism of dietary components. No adverse effects were found on reproduction or neonate development in rats and mice. Therefore, no adverse health effects in humans are expected from exposure to purified cellulose.

Preparation and characterization of a [14C]cellulose suitable for human metabolic studies

In six normal subjects administered 5 microCi of an oral dose of a commercially available 14C-labelled cellulose, significant amounts of 14CO2 were detected in expired air within 30 min, suggesting that other 14C-labelled non-cellulosic material was present. Chemical and microscopical examination confirmed that starch was the principal contaminant. The commercial preparation was purified using amyloglucosidase (EC 3.2.1.3) digestion following gelatinization of the starch by autoclaving. Subsequent administration of the purified cellulose to a further six normal subjects decreased the expired air 14CO2 during the subsequent 10 h from 13.0 (SD 4.0) to 4.1 (SD 1.9)%. Administration of the purified product to a further group of four normal subjects, before and after a regimen of increased dietary fibre, showed a cumulative increase in expired 14CO2 over 24 h from 7.9 (SD 1.1) to 12.1 (SD 2.6)% on fibre. In six ileostomy subjects the cumulative excretion of 14CO2 was greatly decreased compared with normal controls (3.0 (SD 1.14) and 10.5 (SD 3.9)% respectively). In constipated subjects expired 14CO2 continued beyond 48 h, in contrast to normal subjects where expired 14CO2 at this time was negligible.

Molecular cloning of complementary DNA: preparation of a plasmid vector with low transformation background

A simple method that allows the rapid preparation of oligo dG-tailed plasmid vectors is presented. The procedure involves purification of the tailed molecules by hybridization to oligo dC-cellulose followed by a stepwise thermal elution. The resulting plasmid is virtually devoid of transformation activity in the absence of oligo dC-tailed DNA fragments. It allows construction of cDNA libraries with as low as 1% of colonies harboring wild-type plasmids.

Differential alkali-extraction of hemicellulose and hydroxyproline from non-delignified cell walls of lupin hypocotyls

The extraction by alkali of hemicellulose polysaccharides and polymer hydroxyproline from non-delignified, primary cell-walls of lupin hypocotyls has been studied, using sequential extractions at 0 degrees and 18-22 degrees. 10% Aqueous potassium hydroxide at 0 degrees rapidly removed about two-thirds of the hemicellulose normally extracted in 10% KOH at 18-22 degrees and including nearly all of the hemicellulose-A. Little hydroxyproline was released at 0 degrees. When the temperature was subsequently raised to 18-22 degrees, the remaining 10% KOH-soluble hemicellulose, along with most of the hydroxyproline, was released. The monosaccharide composition of these fractions changed markedly with the time of extraction. Arabinose increased from 35% of the polysaccharide extracted during the first hour at 18-22 degrees to similar to 65% of the polysaccharide extracted between 16 and 20 h at 18-22 degrees. Hydroxyproline changed similarly as a proportion of polymer. The implications of these and other results are discussed in relation to polysaccharide and polymer extraction without prior delignification and to models of the primary cell-wall.

Cellulose: its regeneration in the native lattice

The regeneration of cellulose from solutions in 85 percent phosphoric acid into glycerol at 170 degrees C resulted in its recovery wholly in the native or cellulose I lattice. Identification of the structure of the regenerated material is based on comparisons of its x-ray diffractogram and its Raman spectrum with those of the native fiber, cellulose II, and cellulose IV.