Comparison of accuracy of immediate implant placement between planned and actual position in pre-extractive versus conventional method - A prospective study

This study aims to evaluate the accuracy of immediate implants in mandibular molars between the conventional method and the pre-extractive inter-radicular method.

MATERIALS AND METHODS

A total of 20 patients were equally divided into two groups. Implants were placed using the conventional method (Group A) and pre-extractive inte-rradicular method (Group B). Coronal, apical and angular deviation between planned and placed implants were evaluated by superimposing preoperative and postoperative three-dimensional (3D) STL models in Geomagic Freeform software. The data were subjected to an unpaired Student t-test.

RESULTS

Results revealed that the coronal, apical and angular deviation were lower in the pre-extractive inter-radicular drilling method than in the conventional method, which was statistically significant. Apical deviation was greater than coronal deviation in both the sagittal and coronal planes. It was also found that the mean deviation was greater in the sagittal plane (mesio-distal axis) than in the coronal plane (bucco-lingual axis).

CONCLUSION

Comparison of the two methods revealed significant changes between the planned and actual positions of implant. When stringent steps were followed, the degree of deviation was found to be less in the pre-extractive inter-radicular approach, proving it to be more accurate than the conventional method. However, large-scale research studies are required to extrapolate our findings.

The three-dimensional stability and accuracy of 3D printing surgical templates: An In Vitro study

OBJECTIVE

To evaluate the three-dimensional (3D) stability and accuracy of additively manufactured surgical templates fabricated using two different 3D printers and materials.

MATERIALS AND METHODS

Forty surgical templates were designed and printed using two different 3D printers: the resin group (n = 20) used a digital light processing (DLP) 3D printer with photopolymer resin, and the metal group (n = 20) employed a selective laser melting (SLM) 3D printer with titanium alloy. All surgical templates were scanned immediately after production and re-digitalized after one month of storage. Similarly, the implant simulations were performed twice. Three-dimensional congruency between the original design and the manufactured surgical templates was quantified using the root mean square (RMS), and the definitive and planned implant positions were determined and compared.

RESULTS

At the postproduction stage, the metal templates exhibited higher accuracy than the resin templates (p < 0.001), and these differences persisted after one month of storage (p < 0.001). The resin templates demonstrated a significant decrease in three-dimensional stability after one month of storage (p < 0.001), whereas the metal templates were not affected (p > 0.05). No significant differences in implant accuracy were found between the two groups. However, the resin templates showed a significant increase in apical and angular deviations after one month of storage (p < 0.001), whereas the metal templates were not affected (p > 0.05).

CONCLUSION

Printed metal templates showed higher fabrication accuracy than printed resin templates. The three-dimensional stability and implant accuracy of printed metal templates remained unaffected by one month of storage.

CLINICAL SIGNIFICANCE

With superior three-dimensional stability and acceptable implant accuracy, printed metal templates can be considered a viable alternative technique for guided surgery.

Characteristics of healthy peri-implant tissues

This article forms part of the themed issue on dental implants, with the general dentist being the main intended reader and with particular relevance to primary care dental professionals. It aims to describe the various characteristics of the implant in health, address contemporary developments in implant dentistry and offer some novel insights on the prevention of peri-implant diseases. A healthy implant exhibits specific histological, clinical and radiographic characteristics. Understanding such aspects leads to proper diagnosis and measures to maintain tissue integrity and prevent the development and progression of peri-implant diseases. Moreover, internationally and widely accepted definitions and recommendations based on expert consensus have been put forward to guide day-to-day clinical practice. This information should provide general practitioners with the means necessary to achieve the best possible outcome for their patients.

Accuracy of linear measurements for implant planning based on low-dose cone beam CT protocols: a systematic review and meta-analysis

OBJECTIVES

The aim of this systematic review was to verify the accuracy of linear measurements performed on low-dose CBCT protocols for implant planning, in comparison with those performed on standard and high-resolution CBCT protocols.

METHODS

The literature search included four databases (Pubmed, Web of Science, Embase, and Scopus). Two reviewers independently screened titles/abstracts and full texts according to eligibility criteria, extracted the data, and examined the methodological quality. Risk of bias assessment was performed using the Quality Assessment Tool For In Vitro Studies. Random-effects meta-analysis was used for pooling measurement error data.

RESULTS

The initial search yielded 4684 titles. In total, 13 studies were included in the systematic review, representing a total of 81 samples, while 9 studies were included in the meta-analysis. The risk of bias ranged from medium to low. The main results across the studies indicate a strong consistency in linear measurements performed on low-dose images in relation to the reference methods. The overall pooled planning measurement error from low-dose CBCT protocols was -0.24 mm (95% CI, -0.52 to 0.04) with a high level of heterogeneity, showing a tendency for underestimation of real values. Various studies found no significant differences in measurements across different protocols (eg, voxel sizes, mA settings, or dose levels), regions (incisor, premolar, molar) and types (height vs. width). Some studies, however, noted exceptions in measurements performed on the posterior mandible.

CONCLUSION

Low-dose CBCT protocols offer adequate precision and accuracy of linear measurements for implant planning. Nevertheless, diagnostic image quality needs must be taken into consideration when choosing a low-dose CBCT protocol.

Histologic evaluation of edentulous alveolar ridge horizontal bone augmentations using a xenogeneic bone substitute and autologous platelet concentrates: a case series

OBJECTIVES

This case series aimed to assess the efficacy of a novel horizontal ridge augmentation modality using histology. Combinations of "sticky bone" and tenting screws without autologous bone were used as augmentative materials.

METHOD AND MATERIALS

Five individuals presenting healed, atrophic, partially edentulous sites that required horizontal bone augmentation before implant placement were enrolled. Patients underwent the same augmentation type and 5 months of postoperative reentry procedures. The first surgery served as implant site development, whereas the biopsy and corresponding implant placement were performed during reentry. The bone was qualitatively analyzed using histology and histomorphometry and quantitatively evaluated using CBCT.

RESULTS

Four individuals healed uneventfully. Early wound dehiscence occurred in one case. Histology showed favorable bone substitute incorporation into the newly formed bone and intimate contact between de novo bone and graft material in most cases. Histomorphometry revealed an average of 48 ± 28% newly formed bone, 19 ± 13% graft material, and 33 ± 26% soft tissue components. The CBCT-based mean alveolar ridge horizontal increase was 3.9 ± 0.6 mm at 5 months postoperatively.

CONCLUSIONS

The described augmentation method appears suitable for implant site development resulting in favorable bone quality according to histology. However, clinicians must accommodate 1 to 2 mm of resorption in augmentative material width at the buccal aspect.

Evaluation of the Correlation Between the Structural Parameters of Trabecular Bone in CBCT and the Primary Stability of Dental Implants

PURPOSE

To investigate the relationship between the structural parameters of trabecular bone obtained from CBCT imaging and the primary stability of dental implants.

MATERIALS AND METHODS

Sixty patients underwent implant placement followed by primary stability evaluation via measurement of the insertion torque (IT) and the implant stability quotient (ISQ). Gray values (GV) and the fractal dimension (FD) were also measured using pretreatment CBCT images.

RESULTS

FD values showed a positive and significant relationship with ISQ and IT values (P = .017 and P = .004, respectively). Additionally, there was a positive and significant correlation between GV and IT (P = .004) as well as between GV and ISQ (P = .010). FD and GV showed a considerable difference between the maxillary and mandibular jaws and were higher in the mandible. Only FD was significantly different between men and women and was higher in men. In the two age groups (older and younger than 45 years), only GV was considerably higher in people older than 45 (P < .05).

CONCLUSIONS

Both fractal dimension and gray values obtained from CBCT are efficient methods for predicting the primary stability of the implant due to their relationship with ISQ and IT values.

Do Implant Coatings Affect Healing of Placed Implants? An Umbrella Review

PURPOSE

To analyze the available evidence and assess the effect of different implant coatings on healing outcomes.

MATERIALS AND METHODS

Using the PICOS strategy, a structured question was formed. A protocol was agreed upon and registered with PROSPERO (no. CRD42022321926). The MEDLINE, Embase, Cochrane Database of Systematic Reviews, Scopus, Web of Science, Pubmed, and ScienceDirect databases were searched using a structured strategy. Study selection was independently carried out in duplicate, first by title and abstract, then by full-text assessment. Quality and risk of bias were independently assessed in duplicate using AMSTAR 2 and ROBIS. Data extraction was independently undertaken in duplicate using a predefined extraction form.

RESULTS

The search yielded 11 systematic reviews for inclusion. The most commonly assessed coatings were based on calcium phosphate-including hydroxyapatite (HA), brushite, and bioabsorbable nano-HA-followed by bisphosphonate, then bioactive glass coatings. Included reviews most frequently assessed marginal bone loss (MBL), bone-to-implant contact (BIC), and survival/success rates. There was considerable heterogeneity and small sample sizes. The quality assessment suggested low confidence in the reviews and high risk of bias.

CONCLUSIONS

The included reviews provide weak evidence that implant coatings improve osseointegration and reduce MBL following implant placement. There was weak evidence for progressive complications for calcium phosphate coatings. Further research and long-term multicenter controlled clinical trials with improved standardization and control of bias are required to better understand the effects of coating implants.

Using a Bone Density Measuring Micromotor to Distinguish Different Cortical/Cancellous Combinations in Vitro: A Study Using Polyurethane Foam Blocks

PURPOSE

To assess whether a recently introduced implant placement micromotor that provides site-specific, operator independent cancellous bone density measurements can detect the presence of a cortical bone layer and measure its thickness and density.

MATERIALS AND METHODS

An in vitro experiment was performed on six double-layer polyurethane foam blocks mimicking the jawbone with different cortical thickness/cancellous density combinations. The densities were measured using the micromotor after either removing the cortical layer or leaving it intact, both with and without irrigation.

RESULTS

The results were compared by means of nonparametric statistical tests. Independent of irrigation, the micromotor detected the cortical layer when it was left intact and accurately estimated its thickness. The micromotor did not discriminate between blocks when they were considered separately, but it did when they were grouped into four or three classes.

CONCLUSIONS

The present study suggests that the micromotor may represent a valid device to quantitatively assess bone quality and density. If the micromotor can quantitatively distinguish different cortical/cancellous bone combinations in humans, it may be a helpful tool for performing finely tuned, patient-tailored preparations of the implant seat, making tooth rehabilitation in challenging clinical conditions more predictable.

Soft Tissue Response and Determination of Underlying Risk Drivers for Recession and Mucositis after AMSJI Implantation in the Maxilla

PURPOSE

To evaluate the soft tissue response to the placement of additively manufactured subperiosteal jaw implants (AMSJI) in the severely atrophic maxilla and to identify possible risk factors for soft tissue breakdown.

MATERIALS AND METHODS

An international multicenter study was conducted, and 15 men (mean age: 64.62 years; SD: ± 6.75) and 25 women (mean age: 65.24 years; SD: ± 6.77) with advanced maxillary jaw resorption (Cawood and Howell Class V or more) were included in this study. General patient data were collected, and all subjects were clinically examined. Inclusion criteria were patients who underwent bilateral AMSJI placement in the maxilla at least 1 year prior. Exclusion criteria were patients who did not have patient, surgeon, or dentist consent to participate in the study before their inclusion.

RESULTS

A total of 40 patients were enrolled, with a mean follow-up period of 917 days (SD: ± 306.89 days). Primary implant stability was achieved postoperatively in all cases, and all implants were loaded with a final prosthesis. At the time of the study, only 1 patient showed mobility (> 1 mm) of the bilateral AMSJI. Due to mucosal recession, exposure of the framework was seen in 26 patients (65%) and was mainly in the left (21.43% of 26) and right (18.57% of 26) midlateral region. A thin biotype and the presence of mucositis were found to be risk factors (P < .05). Although not significant, smokers had a risk of developing a recession that was nearly seven times (odds ratio: 6.88; P = .08) greater than that of nonsmokers.

CONCLUSIONS

Twenty-six (65%) patients presented with a recession in one (or more) of the seven regions after oral rehabilitation with bilateral AMSJI placement. Several risk drivers were evaluated. The collapse of soft tissues around the AMSJI that led to caudal exposure of the arms was correlated with a thin biotype and the presence of mucositis.

A Multicenter Cohort Study on 301 Tissue-Level Implants: Cumulative Implant Survival Rate and Marginal Bone Level Change up to 4.5 Years

PURPOSE

To retrospectively determine the cumulative survival rate (CSR) and marginal bone level change (ΔMBL) around novel hybrid design tissue-level (TL) dental implants that support multiple-screw-retained restorations.

MATERIALS AND METHODS

Implant CSRs were analyzed at the implant and patient level using Kaplan-Meier estimates. ΔMBL was measured by comparing the periapical loading and follow-up visit radiographs using an improved standardized digital methodology based on image gray levels. ΔMBL outcomes were subject to linear mixed regression to identify potential risk factors.

RESULTS

A total of 301 TL implants in 69 patients with an average age of 62.6 ± 11.7 years (range: 36 to 87 years) at the time of implant placement were considered for the analysis. All 301 implants were successfully restored and loaded. The 54-month CSRs at the implant and patient levels were 98.9% (95% CI: 96.7 to 99.6) and 95.3% (95% CI: 86.1 to 98.5), respectively. ΔMBL after a mean follow-up of 22 ± 10.7 months after loading was 0.00 ± 0.57 mm. None of the implant sites showed marginal bone loss exceeding 1.5 mm. Multivariate regression analysis revealed a significant association between ΔMBL and the loading protocol (P = .027) but not between ΔMBL and age or transgingival height.

CONCLUSIONS

The high CSRs and stable peri-implant marginal bone levels support the use of recent TL implants, which have a hybrid design inherited from the bone-level implant-abutment connection, as a suitable treatment option for restoring partially or fully edentulous patients with a good mid-term prognosis. These results should be complemented by further prospective studies in a real-world multicenter private practice setup that represents the daily realities of implant treatment.

The Effect of Clopidogrel Treatment on Osseointegration of Titanium Implants: A Histomorphometric Study in Rabbits

PURPOSE

To evaluate the effect of continuous perioperative clopidogrel treatment on the osseointegration of titanium implants.

MATERIALS AND METHODS

A total of 32 New Zealand rabbits were randomly divided between two groups: a clopidogrel group (n = 16) and a control group (n = 16). For 1 week prior to the surgical placement of a titanium implant in their medial femoral condyle, rabbits in the clopidogrel group received 3 mg/kg of clopidogrel daily, and the control group received only the vehicle. This treatment was continued for another 6 weeks postoperatively. At 6 weeks, the rabbits were euthanized and postmortem histologic and histomorphometric evaluation of the implants was performed.

RESULTS

The surgical procedures and postoperative period were uneventful and well tolerated by all animals without any surgical wound dehiscence, signs of infection, or other complication. No implant failure was observed in any of the groups. Histomorphometric analysis showed that bone-to-implant contact (BIC) was 48.77% for the clopidogrel group and 34.65% for the control group, with statistically significant difference between them (P < .001). Moreover, clopidogrel group had significantly greater bone tissue density (40.52% vs 28.74%, respectively; P <.001) and mean trabecular thickness (284.7 μm vs 180.7 μm, respectively; P < .001) in proximity to the implant surface than the control group, while the mean trabecular number had no difference between groups (1.56 vs 1.60, respectively; P = .961).

CONCLUSIONS

The present study showed that continuous clopidogrel treatment does not negatively affect osseointegration, but rather promotes it in terms of BIC and bone density around the titanium implants. Further studies on the effect of the P2Y12 receptor and its antagonists on peri-implant bone homeostasis may provide useful information or applications for long-term success of dental implant therapy.

Guided and Prosthetically Driven Bone Augmentation Using the Shell Technique and Allogeneic Cortical Plate: A Prospective Case Series

PURPOSE

To describe the use of digital technology to surgically guide the shell technique using allogenic cortical plates for a fully guided bone augmentation procedure.

MATERIALS AND METHODS

A total of 10 patients who required bone augmentation for implant placement were included in this study. Allogenic cortical plates were planned using CAD/CAM to have identical thickness to the original cortical plates, then were digitally positioned and shaped to outline the bone defect according to the existing anatomical details. A cutting pattern and a surgical template were manufactured according to the digitally preplanned bone graft and the intraoral setting.

RESULTS

A total of 12 horizontal bone grafting procedures were performed using the shell technique with allogenic cortical plates. All grafting procedures were deemed successful and allowed for ideal 3D implant positioning. Of the 12 bone grafting procedures, which used a surgical template to position the cortical plate, 3 required an adjustment to reposition the plate to a more ideal position.

CONCLUSIONS

Digital technology was used to create a surgical template to guide the shell bone grafting technique with allogenic cortical plates. All surgical templates offered a fixed support to hold the cortical allogenic plate in the preplanned position, offering a predictable, simplified, and accurate guided bone grafting procedure. Further studies on a larger population of patients are necessary to assess those results and to verify the treatment approach described in this study.

Volumetric Analysis of Peri-implant Tissue Change Over Time: Validating an Innovative 3D Method

PURPOSE

To validate an innovative 3D volumetric method of evaluating tissue changes proposed by Lee et al in 2020 by comparing the results of this method-in which the scanned peri-implant surfaces were transformed, visualized, and analyzed as 3D objects-to the results reported by an existing method based on calculation of the mean distance between measured surfaces. The null hypothesis was that there was no statistically significant difference between the two methods. Additionally, the present study evaluated peri-implant tissue changes 5 years after single implant placement in the esthetic zone.

MATERIALS AND METHODS

Both methods were applied to 11 oral implant site casts (6 maxillary central incisor sites, 5 maxillary lateral incisor sites) taken from 11 patients at crown placement and at follow-up examinations 5 years later. The methods are based on digital workflows in which the reference and 5-year casts are scanned and the resulting STL files are superimposed and analyzed for three regions of interest (mesial papilla, central area, and distal papilla). The volumetric changes reported by the Lee et al method and the mean distance method were calculated and compared using the Spearman rank correlation coefficient (P < .01) and the Wilcoxon signed-rank test (P < .05).

RESULTS

The correlation between the two sets of measurements was very high (Spearman rank correlation coefficient = 0.885). The new volumetric method indicated a mean volume loss of 2.82 mm3 (SD: 5.06), while the method based on the measurement of mean distance showed a mean volume loss of 2.92 mm3 (SD: 4.43; Wilcoxon signed-rank test result: P = .77). No statistically significant difference was found. The two methods gave equivalent results, and the null hypothesis was accepted.

CONCLUSIONS

The new volumetric method was validated and can be considered a trustworthy tool.

Dental Implant Positioning Accuracy Using a Key or Keyless Static Fully Guided Surgical System: A Prospective Systematic Review and Meta-analysis

PURPOSE

To realize a systematic review with prospective meta-analysis aiming to compare the accuracy of static fully guided implant placement depending on the drill key modality (conventional drill key surgery systems vs newer keyless systems) and evaluate the impact of deviation factors.

MATERIALS AND METHODS

An electronic systematic search was conducted to identify prospective clinical trials matching inclusion criteria. The variables of interest were coronal global, apical, vertical, and angular deviations. The types of edentulism and surgical guide support were investigated as deviation factors. Meta-regression (mixed-effect model) was performed. Heterogeneity was assessed using Cochrane's I. test and interpretation thresholds.

RESULTS

A total of 1,233 implants in 475 patients were analyzed (18 studies included). Coronal global deviation was significantly lower in the keyless group than in the key group (-0.36 mm; 95% CI -0.62, -0.09; P = .008). Angulation control of the keyless system was superior to that of the key system (-0.36 degrees; 95% CI -0.75, 0.02; P = .063). Nonsignificant differences were found between both groups in apical (P = .684) and vertical deviations (P = .958). Significant influence of the type of edentulism (single, partial, total) and surgical guide support (tooth, mucosa, bone) on the overall amount of coronal global, apical, and angular deviations was found (P < .001). The lowest deviations were found in partial edentulism and tooth-supported surgical guide groups. (P < .001).

CONCLUSIONS

Keyless static fully guided surgical systems allowed significantly better control of coronal and angular deviations than conventional systems. The types of edentulism and surgical guide support seemed to influence the positioning accuracy.

Assessment of a novel electrochemically deposited smart bioactive trabecular coating (SBTC®): a randomized controlled clinical trial

OBJECTIVES

A randomized controlled clinical trial of dental implants was conducted to compare the clinical properties of a novel electrochemically deposited calcium phosphate coating to those of a common marketed surface treatment.

MATERIAL AND METHODS

Forty implants of the same brand and type were placed in 20 fully edentulous participants requiring mandibular implantation. The two study groups were defined by the surface treatment of the implants. 20 implants in the control group were coated via a commercial electrochemical surface treatment that forms a mixture of brushite and hydroxyapatite, while the remaining 20 in the test group were coated with a novel electrochemical Smart Bioactive Trabecular Coating (SBTC®). A split-mouth design was employed, with each participants receiving one control implant in one mandibular side and a test implant in the other. To mitigate potential operator-handedness bias, control and test implants were randomly assigned to mandibular sides. All cases underwent digital planning, implant placement with a static surgical guide, and participants received locator-anchored full-arch dentures. The primary outcome was implant stability (measured using Osstell ISQ) assessed at insertion, loading, and then 3 months, 9 months, and 2 years post-insertion. The secondary outcome was bone level change (in millimeters) over the 2-year observation period. Oral health-related quality of life (OHRQL) was monitored using the OHIP-14 questionnaire. Complications and adverse events were recorded.

RESULTS

Successful osseointegration and implant stability were achieved in all cases, allowing loading. ISQ values steadily increased throughout the observation period. While no significant differences were observed between the SBTC® and control coatings, the test group exhibited a higher ISQ gain. Bone resorption was somewhat lower in the SBTC® but not significantly so. Patients' OHRQL significantly improved after denture delivery and remained stable throughout the follow-up. No complications or adverse events were observed.

CONCLUSIONS

Based on the study results, we conclude that the new surface treatment is a safe alternative to the widely used control surface, demonstrating similar osseointegrative properties and time-dependent bone level changes. Further research may explore the broader implications of these findings.

TRIAL REGISTRATION

The study is registered on clinicaltrials.gov under the identifier ID: NCT06034171.

[Risk factors and prevention for implant treatment in patients with periodontitis]

In patients with periodontitis, due to problems of periodontal tissue infection as well as soft and hard tissues defects, it may lead to implant infection, gingival papilla loss, soft tissue recession and poor coordination with adjacent teeth. For such patients, periodontal infection should be actively controlled before dental implant therapy. In consideration of insufficient soft and hard tissues, alveolar ridge preservation and soft tissue augmentation procedure can be used to preserve or increase soft and hard tissues as much as possible. Multi-disciplinary treatment is often needed for occlusion problems and coordination with adjacent tooth. Periodontal maintenance treatment of implants and natural teeth is also necessary after implant therapy. This paper discussed these risk factors and strategies for prevention and control, in order to provide some clinical guidances for the implant treatment of periodontitis patients.

Application of sticky bone combined with concentrated growth factor (CGF) for horizontal alveolar ridge augmentation of anterior teeth: a randomized controlled clinical study

OBJECTIVE

This study was designed to estimate the effect of sticky bone combined with concentrated growth factor (CGF) on anterior alveolar horizontal augmentation during implantation.

METHODS

Twenty-eight patients were randomly assigned to either the test group (Group 1, n = 14) or the control group (Group 2, n = 14). Patients in Group 1 and Group 2 underwent GBR using sticky bone combined with CGF and bone powders mixed with saline, respectively. On postoperative Day 7, the patients completed the visual analogue scale (VAS). Three-dimensional models of maxillary alveolar bone were reconstructed from CBCT data at different periods, and the bone volume conversion rate was calculated with the assistance of a measurement marker guide. Labial bone thickness before and after trauma closure and bone density at six months postoperatively were also measured.

RESULTS

The mean bone volume conversion rate for Group 1 (72.09 ± 12.18%) was greater than that for Group 2 (57.47 ± 9.62%, P = 0.002). The VAS score was lower for Group 1 than for Group 2 (P = 0.032). At six months postoperatively, greater bone density was found in patients in Group 1 than in those in Group 2, although the difference was not statistically significant (P > 0.05). The change in the thickness of the labial bone graft material in Group 1 was smaller than that in Group 2 (P = 0.025).

CONCLUSION

Sticky bone combined with CGF was able to achieve better bone augmentation than conventional GBR. With excellent mechanical properties and the capacity to release growth factors, sticky bone is an ideal material for bone grafting.

TRIAL REGISTRATION

The study was registered at the Chinese Clinical Trial Registry on 10/04/2022 (Identification number: ChiCTR2200058500).

A Novel Dental Implant Approach for Crestal Sinus Elevation: A Case Series Study

The aim of this study was to evaluate the radiographic and clinical outcomes of patients undergoing sinus membrane elevation via a minimally invasive crestal approach utilizing the dental implant. Twenty patients having 1 or more missing posterior teeth were included. The maxillary sinus membrane was elevated using dental implant via a crestal approach in areas with insufficient residual bone. CBCT scans were used to measure the amount of newly formed bone, implant length inside the sinus, bucco-palatal sinus width, and bone thickness. Surgical and postsurgical complications along with implant survival were also measured. The mean (±SD) values for the newly formed bone after 1 year were 2.4 (±1.87) mm, while values for implant length inside the sinus were 4 (±1.49) mm. The results showed that percentage of implant length inside the sinus and the palatal bone thickness were statistically significant positive predictors of the newly formed bone. Higher percentage of implant length inside the sinus and increased palatal bone thickness were associated with larger amounts of newly formed bone. A high patient satisfaction was reported along with a 100% implant survival. The utilization of the novel dental implant approach for crestal sinus elevation demonstrated predictable clinical and radiographic outcomes. This novel technique is simple to both patients and clinicians, rendering it a promising and cost-efficient procedure.

Simultaneous sinus elevation and immediate implant placement without biomaterial: A technical note

Sinus floor elevation is widely considered as one of the most reliable and predictable procedures for augmenting posterior maxillary bone volume before implant placement. The lateral window technique is often described as the gold standard, especially when dealing with limited residual bone height. Traditionally, severe vertical defects in the posterior maxilla required a two-stage approach: first elevating the sinus membrane with biomaterial, followed by a second surgery for implant placement. This article introduces an innovative approach to the lateral sinus lift procedure, enabling simultaneous implant placement in sites with less than 5 mm of remaining bone height. This original one-stage surgical approach is interesting because it does not involve grafting of any biomaterial into the sinus. Its main objectives are to enhance safety and predictability while reducing the risk of post-operative infections. However, it's essential to emphasize that achieving an ideal implant position with adequate primary stability is crucial for its viability.

Effect of guided implant placement learning experiences on freehand skills: A pilot study

OBJECTIVES

Guided implant systems can be used as a training approach for placing implants. This in vitro prospective randomized pilot study evaluated the learning progression and skill development in freehand placement of two implants supporting a three-unit fixed prosthesis on a simulation model among novice operators.

MATERIAL AND METHODS

Four senior dental students with no prior implant placement experience participated in the study. As a baseline, each student placed two mandibular and two maxillary implants by freehand technique on a simulation model. Sixteen consecutive guided placements using a static guide, dynamic navigation, and template-based guide followed totaling 32 guided implant placements into maxillary and mandibular models. Freehand implant placements before and after the various guided navigation attempts were compared to assess their impact on freehand skill. Metrics compared included surgical time, horizontal, vertical, and angulation discrepancies between the planned and placed implant positions measured on superimposed CBCT scans and analyzed with repeated measures regression with Tukey's adjusted pairwise comparisons (α = .05).

RESULTS

Before training with guided techniques, the average baseline freehand implant placement took 10.2 min and decreased to 8.2 after training but this difference was not statistically significant (p = .1670) There was marginal evidence of a significant difference in the 3D apex deviation with an average improvement of 0.89 mm (95% CI: -0.38, 2.16, p = .1120); and marginal evidence of a significant improvement in the overall angle with an average improvement of 3.74° (95% CI: -1.00, 8.48, p = .0869) between baseline and final freehand placement attempts.

CONCLUSIONS

Within the limitations of this pilot study, guided implant placement experiences did not significantly benefit or hinder freehand placement skills. Dental students should be exposed to various placement techniques to prepare them for clinical practice and allow them to make informed decisions on the best technique based on their skills and a given clinical scenario.

How do the dimensions of peri-implant mucosa affect marginal bone loss in equicrestal and subcrestal position of implants? A 1-year clinical trial

INTRODUCTION

There is evidence that the apico-coronal implant position and the mucosal phenotype can affect the extent of peri-implant bone loss. This clinical trial analyzes the bone remodeling and marginal bone loss that occur around conical-connection implants placed equicrestally and subcrestally, assessing the effect of the peri-implant soft-tissue phenotype.

METHODS

Fifty-one patients received 56 implants of distinct diameters (3.5 mm Ø n = 6; 4.3 mm Ø n = 41; 5 mm Ø n = 9) in the posterior part of the maxilla or mandible. The implants were placed equicrestally, 1 mm subcrestally and >1 mm subcrestally, depending on the initial supracrestal tissue height (STH). After 3 months of non-submerged healing, single metal-ceramic screw-retained implant-supported crowns were placed. Longitudinal measurements of STH, mucosal thickness and keratinized mucosa width (KMW) were made at the time of implant placement (T0), crown placement (T1), and after 3 (T2) and 6 months (T3) of prosthetic loading. At each of these points, a radiographic evaluation of bone remodeling and marginal bone loss was also performed.

RESULTS

STH was significantly greater for implants placed >1 mm subcrestally than for those placed 1 mm subcrestally. After 12 months of follow-up, a very significant (p < 0.001) loss of KMW was observed, in addition to a marginal bone loss of 0.08 ± 0.1, 0.15 ± 0.2, and 0.14 ± 0.2 mm in the groups placed equicrestally, 1 mm subcrestally and >1 mm subcrestally, respectively. After the multiple linear regression, marginal bone loss was found to depend primarily on KMW (β = -0.43), while also being affected by STH (β = 0.32) and implant diameter (β = -0.28).

CONCLUSIONS

Marginal bone loss may be influenced by the position with respect to the bone crest, as well as the KMW, STH, and implant diameter. However, more well-controlled studies are needed to verify these above-mentioned findings with different implant designs and connections.

Innovative principle of implant-oriented fibula placement in mandibular reconstruction using double-barrel fibula and simultaneous implants: A technical note

Simultaneous or secondary inserted implants with double-barrel fibula to reconstruct the mandible have become a common method. However, difficulties in later restoration caused by placement errors of fibula or incipiently placed implants have also been reported in some studies. This note describes a novel technique of implant-oriented guide plates helpful for mandible ablation, fibula segmentation and positioning, and implant placement. We design a series of guide plates especially an implant-fibula placing guide plate, and record and fix the relative spatial positions of the remaining teeth, the simultaneous implants and upper fibula. During surgery, the placement of upper fibula is oriented towards appropriate placement of implants. Therefore, the position of upper fibula can meet the requirements of simultaneous implant as much as possible. Within the limits of present observation, we believe that this technique may increase the manipuility while reducing the errors and the risk of complications.

Artificial intelligence serving pre-surgical digital implant planning: A scoping review

OBJECTIVES

To conduct a scoping review focusing on artificial intelligence (AI) applications in presurgical dental implant planning. Additionally, to assess the automation degree of clinically available pre-surgical implant planning software.

DATA AND SOURCES

A systematic electronic literature search was performed in five databases (PubMed, Embase, Web of Science, Cochrane Library, and Scopus), along with exploring gray literature web-based resources until November 2023. English-language studies on AI-driven tools for digital implant planning were included based on an independent evaluation by two reviewers. An assessment of automation steps in dental implant planning software available on the market up to November 2023 was also performed.

STUDY SELECTION AND RESULTS

From an initial 1,732 studies, 47 met eligibility criteria. Within this subset, 39 studies focused on AI networks for anatomical landmark-based segmentation, creating virtual patients. Eight studies were dedicated to AI networks for virtual implant placement. Additionally, a total of 12 commonly available implant planning software applications were identified and assessed for their level of automation in pre-surgical digital implant workflows. Notably, only six of these featured at least one fully automated step in the planning software, with none possessing a fully automated implant planning protocol.

CONCLUSIONS

AI plays a crucial role in achieving accurate, time-efficient, and consistent segmentation of anatomical landmarks, serving the process of virtual patient creation. Additionally, currently available systems for virtual implant placement demonstrate different degrees of automation. It is important to highlight that, as of now, full automation of this process has not been documented nor scientifically validated.

CLINICAL SIGNIFICANCE

Scientific and clinical validation of AI applications for presurgical dental implant planning is currently scarce. The present review allows the clinician to identify AI-based automation in presurgical dental implant planning and assess the potential underlying scientific validation.

Flapless dental implant surgery enabled by haptic robotic guidance: A case report

This case report presents the use of haptic robotic technology in one patient with six implants placed in the maxilla and five implants in the lower mandible with the goal of individual single implant supported crowns to be placed over each implant after 6 months. All implants were placed using a flapless technique, with one immediate implant placement after extraction. All implants were placed with a high degree of accuracy relative to the pre-operative plan as determined by post-op CBCT analysis with an average angular deviation of 2.58° and positional deviations at the coronal and apical aspects of the implant around 1 mm (0.93 and 1.06 mm, respectively). Total surgical time of less than 2 h. Haptic robotics physically guides the location, orientation, and depth of the tools during both drilling and implantation and thus allows for accurate placement as well as the intra-operative flexibility to change the plan as necessary while providing excellent visualization and irrigation. This robotic technology provides a treatment that focuses on accuracy and safety providing the best chance at excellent surgical outcomes for the patient.