Small-angle neutron scattering investigations on sintering behavior of combustion synthesized La0.8Sr0.2CrO3

Pore morphology of La0.8Sr0.2CrO3 (LSC) powder compacts, sintered between 1200 degrees C and 1450 degrees C for a fixed time, has been characterized by small-angle neutron scattering (SANS) in the scattering wave vector 'q' range, 0.003-0.17 nm(-1) of a double crystal based instrument. Scattering profile of green compact exhibits fractal scaling at two regions of 'q' with magnitudes of fractal dimensionality 1.8 and 2.36. Scattering profiles of sintered pellets have been modeled assuming a random distribution of near spherical pores in the solid matrix. Estimated pore size distributions of sintered pellets indicate decrease in pore volume has taken place by progressive elimination of smallest pores and growth of relatively larger pores with increasing sintering temperature. SANS results are supplemented by light scattering measurement and TEM image of powder and SEM image of the fracture surface of sintered pellet.

Luminescence properties of SnO2 nanoparticles dispersed in Eu3+ doped SiO2 matrix

SnO2 nanoparticles dispersed in Eu3+ doped silica (SnO2-SiO2:Eu3+) were prepared at a low temperature (185 degrees C) in ethylene glycol medium. Transmission electron microscopy studies on as-prepared samples have established that SnO2 nanoparticles having size of 4.6 nm are uniformly covered by the SiO2 matrix. Significant extent of exciton mediated energy transfer between SnO2 and Eu3+ ions in heat treated SnO2-SiO2:Eu3+ samples has been attributed to the diffusion of Eu3+ ions from the SiO2 matrix to the near vicinity of SnO2 nanoparticles and its incorporation in the SnO2 matrix. On the other hand, very weak energy transfer exists for SnO2:Eu3+ nanoparticles heated at different temperatures due to the phase segregation of Eu3+ ions from the matrix.

Green synthesis of highly stabilized nanocrystalline silver particles by a non-pathogenic and agriculturally important fungus T. asperellum

A controlled and up-scalable biosynthetic route to nanocrystalline silver particles with well-defined morphology using cell-free aqueous filtrate of a non-pathogenic and commercially viable biocontrol agent Trichoderma asperellum is being reported for the first time. A transparent solution of the cell-free filtrate of Trichoderma asperellum containing 1 mM AgNO(3) turns progressively dark brown within 5 d of incubation at 25 °C. The kinetics of the reaction was studied using UV-vis spectroscopy. An intense surface plasmon resonance band at ∼410 nm in the UV-vis spectrum clearly reveals the formation of silver nanoparticles. The size of the silver particles using TEM and XRD studies is found to be in the range 13-18 nm. These nanoparticles are found to be highly stable and even after prolonged storage for over 6 months they do not show significant aggregation. A plausible mechanism behind the formation of silver nanoparticles and their stabilization via capping has been investigated using FTIR and surface-enhanced resonance Raman spectroscopy.

Nanostructure assembly of indium sulphide quantum dots and their characterization

Nanocrystals (approximately 5 nm) of the semiconducting wide band gap material beta-In2S3 obtained by chemical synthesis through a hydrothermal route were characterized for phase and compositional purity. These nanoparticles exhibited quantum confinement characteristics as revealed by a blue-shifted optical absorption. These quantum dots of beta-In2S3 were electrically driven from a monodisperse colloidal suspension on to conducting glass substrates by Electophoretic Deposition (EPD) technique and nanostructural thin films were obtained. The crystalline and morphological structures of these deposits were investigated by X-ray diffraction and nanoscopic techniques. We report here that certain interesting nanostructural morphologies were observed in the two-dimensional quantum dot assemblies of beta-In2S3. The effect of the controlling parameters on the cluster growth and deposit integrity was also systematically studied through a series of experiments and the results are reported here.

A facile synthesis of CuInS2 nanoparticles from molecular single source precursors

CuInS2 nanoparticles have been synthesized via solvent thermolysis of novel bimetallic complexes of the general formula [(Ph3P)2CuIn(S2COR)4] (where R = CH3; C2H5; C(CH3)2); and [(Ph3P)2CuIn(SCH2CH2S)2]. These complexes have been prepared by the reactions of Na/KS2COR and NaSCH2CH2SNa with InCl3 and [(Ph3P)2CuNO3] in methanol, respectively. Solvent thermolyses of these complexes were carried out in ethylene glycol at 196 degrees C for different time periods. The nanoparticles obtained were characterized extensively by techniques like powder X-ray diffraction, transmission electron microscopy, selected area electron diffraction, and X-ray photoelectron spectroscopy. The optical band gap of the nanoparticles was determined by diffuse reflectance spectroscopy (DRS).

Nano crystalline ceria-neodymia solid solutions by combustion route: effect of agglomeration on powder properties

About 8 compositions in the system Ce(1-x)Nd(x)O(2-x/2) (0.0 < or = x < or = 0.50) were prepared by the combustion process using glycine as a fuel and corresponding metal nitrates as the oxidants. The oxidant-to-fuel ratio was taken as 1:1.0. The products were characterized by X-ray diffraction (XRD), surface area, scanning electron microscopy (SEM), transmission electron microscopy (TEM), dynamic light scattering, sinterability etc. The crystallite size of powders, as obtained by the line broadening method, was typically in the range of 7 to 16 nm. The deagglomeration studies carried out showed that the average agglomerate size of these powders increases with increasing content of Nd in CeO2. The powders were sintered at 1200 degrees C to yield densities in the range of 80-95% of theoretical densities. This wide variation in the sintered density was explained based on the powder properties. An interesting observation was that the nature and size of the agglomerates plays an important role in governing properties such as sintered density and in turn ionic conductivity of nano ceramics.

Nanostructured La(Sr)CrO3 through gel combustion: sintering and electrical behavior

Nanostructured La(Sr)CrO3 (LSC) powders was prepared through glycine-nitrate gel combustion process. It was shown for the first time that the use of relatively inexpensive CrO3 as a starting material for chromium has a potential for the bulk preparation of sinter-active LSC powder. As-prepared powder when calcined at 700 degrees C resulted in LSC along with a small amount of SrCrO4 as a secondary phase. The powder was found to be composed of soft agglomerates with a particle size of approximately 70-270 nm. The average agglomerate size was found to be 0.95 microm. The cold pressing and sintering of the LSC powder at 1450 degrees C resulted in mono-phasic La0.8Sr0.2CrO3 with 94% of its theoretical density. This is the lowest sintering temperature ever reported for La0.8Sr0.2CrO3. The conductivity of the sintered La0.8Sr0.2CrO3 at 1000 degrees C was found to be approximately 18 S cm(-1).

Nutrient dynamics and decomposition rates during composting of sulphitation pressmud by different methods

Decomposition rates and nutrient contents of sulphitation pressmud (SPM), either alone or by mixing with cow dung and rice straw, under the aerobic (heap and NADEP), anaerobic (pit) and vermicomposting methods were compared. Loss in Organic C and C/N ratios of the decomposing materials indicated the heap and NADEP methods faster for the composting of SPM alone and SPM + cow dung and vermicomposting method for SPM + rice straw registering significant reductions in Organic C ranging from 45.0 to 61.0% from the respective decomposing materials at termination time (119 days). The heap and NADEP methods recorded C/N ratio of SPM alone as low as 11 and 12 and SPM + cow dung as 12.0 and 13.9 at termination stage. Vermicomposting method brought the C/N ratio of SPM + rice straw to 16.4 as compared to 18.6 to 29.8 with the other methods. Irrespective of the composting methods, CO2 evolution from the decomposing materials was higher in early period (up to 28 days). Among methods, NADEP and heap methods recorded more CO2 evolution in early period while vermicomposting method showed more CO2 evolution at the later intervals in comparison to the other methods. Nutrient content in the decomposing materials at different intervals depended on their initial contents. Total N in the composts were statistically comparable, however, the composts of SPM alone recorded relatively more N than SPM + cow dung and SPM + rice-straw prepared by the respective methods. Total P and K contents of the composts increased with time irrespective of the composting methods. Composts of SPM alone recorded significantly more total P than SPM + cow dung and SPM + rice straw at 62, 91 and 119 days while SPM + rice straw recorded more total K than the composts of other materials. Total P in the composts did not differ with the composting methods, but total K in composts of SPM alone was relatively more with heap and NADEP methods, in SPM + cow dung with pit method and in SPM + rice straw by vermicomposting method. Total S in the composts decreased with time and both the aerobic methods showed more reductions than pit and vermicomposting methods.

SPM characterization of pulsed laser deposited nanocrystalline CrN hard coatings

Nanocrystalline CrN coatings, widely required for surface engineering application covering wear and corrosion resistance, need to be investigated for atomic scale morphology, surface roughness, local stiffness, phase uniformity, and homogeneity. Evolution of these properties as a function of thickness need to be studied. In this paper, we have attempted to address these issues through use of a multimode scanning probe microscope (SPM) equipped to carry out Atomic Force Microscopy (AFM) and Atomic Force Acoustic microscopy (AFAM) of Chromium nitride films (100-500 nm thick) on Si prepared under high vacuum by pulsed Laser Ablation using Nd-YAG Q-switched laser. Prior to SPM analysis, the coatings were annealed in N2 atmosphere at 700 degrees C for 30 minutes for improving crystallanity and coating substrate adhesion. The GIXRD patterns of these annealed specimens showed formation of nanocrystalline CrN. Also signature of amorphous phases was seen. The grain size was estimated to be less than 30 nm. Contact mode AFM imaging revealed a roughness value less than 50 nm. Local stiffness values were calculated from AFM force-distance curves. Imaging of frictional force and surface flaws are being investigated by Frictional Force Microscopy (FFM), resonance spectroscopy, and AFAM, respectively. The contrast in AFAM images is seen due to variation in surface elasticity in reference and CrN samples. Stiffness constant and elastic modulus were calculated for both the samples and compared.

Synthesis and characterization of nanocrystalline Cr2O3 and ZrO2 ceramic materials

A novel methodology based on a hybrid approach has been evolved for synthesizing nearly monodisperse nanocrystalline oxides. The approach basically involves precipitation of gelatinous hydroxide in liquid phase hydrolysis and subsequent temperature programmed calcination to obtain nanocrystalline oxide. Cr2O3 and ZrO2 have been synthesized through this route. This paper describes synthesis procedures giving details of temperature windows required for this synthesis. In addition, solid state analytical technique like X-Ray Diffraction (XRD) and Photoluminescence (PL) have been used to characterize these materials. Especially PL was used to derive information on confinement effect. Transmission Electron Microscope (TEM), Scanning Probe Microscope (SPM), and Scanning Near Field Optical Microscope (SNOM) were used to derive morphology.

Synthesis, characterization, and assembly of beta-In2S3 nanoparticles

Semiconductor nanoparticles of Indium Sulphide were synthesized by a hydrothermal method using InCl3 and Na2S. Powder X-ray Diffraction analysis confirmed that the product obtained was nanocrystals of single-phase beta-In2S3. The crystallite size distribution was obtained from the diffraction profile and the average size was approximately 5 nm. The compositional analyses performed on the as-prepared powder showed that the material was devoid of any impurity with an In:S ratio very close to 2:3. A colloid of very fine In2S3 particles was obtained from the as-prepared powder by suspending them in acetonitrile. The optical absorption of this colloid showed evidence of strong quantum confinement of excitons and as a result the particles yielded intense photoluminescence in the violet-blue region. These colloidal particles were then electrophoretically driven on to a transparent conducting substrate to assemble into a nanostructure. A Grazing Incidence X-ray Diffraction analysis of the deposited layer revealed that the preferred orientation noticed in the native powder was removed in the deposit. The surface morphology of the deposit studied using SEM and AFM displayed an inherent ordering behaviour in the clusters organized into a two-dimensional film. The locus of the cluster lines tend to form closed circles, at the nanoscopic as well as microscopic scales, indicative of certain strong neighborhood correlations. Such structures may be expected to exhibit novel correlated properties also.

Spectroscopic characterization of nanocrystalline chromium nitride (CrN)

Nanocrystalline chromiuim nitride has been synthesised by direct gas phase nitridation of nanocrystalline chromia at 1100 degrees C in ammonia-atmosphere. XRD of this material showed formation of single phase CrN with particle size around 20 nm. AFM studies showed particle distribution along with some soft agglomerated nanostructures. Nanocrystalline Cr2O3 and partially-as well as fully--converted nanocrystalline CrN were also investigated using various spectroscopic techniques like XPS, FT-IR, and Raman for gaining insight into the conversion pathways. Spectroscopic investigations of these materials clearly indicate that complete conversion of CrN occurs by nitriding at 1100 degrees C for 4 hrs. The salient spectroscopic features of these nanocrystalline materials with respect to their microcrystalline counterparts are discussed.

Structural study of La(0.75)Sr(0.25)CrO(3) at high temperatures

A high-temperature neutron diffraction study has been carried out on La(0.75)Sr(0.25)CrO(3) compound in the temperature range 300-1400 K. On doping the parent compound LaCrO(3) with Sr at the La site, the orthorhombic (Pbnm) to rhombohedral ([Formula: see text]) structural transition shifts to lower temperatures. From quantitative Rietveld analysis it is found unequivocally that there is a two-phase coexistence (orthorhombic and rhombohedral phases with ∼89 and 11 weight%, respectively) in the temperature range 300-470 K and a three-phase coexistence (with a new cubic phase with space group Pm3m) in the temperature range 480-1400 K. The weight percentages of the orthorhombic, rhombohedral and cubic phases were found to be ∼49%, 37% and 14%, respectively, in the temperature range 480-1300 K, while over 1350-1400 K, the average weight percentages of orthorhombic, rhombohedral and cubic phases were found to be ∼41%, 41% and 18%, respectively. The coefficients of volume thermal expansion and linear thermal expansion have been determined for all three phases. The importance of the present study has been discussed for practical applications of the studied compound in solid oxide fuel cells.

Cytomegalovirus retinitis in chronic lymphocytic leukaemia

PURPOSE

To describe a rare association of cytomegalovirus (CMV) retinitis.

PATIENTS AND METHODS

Report of three patients with chronic lymphocytic leukaemia (CLL) who developed CMV retinitis.

RESULTS

The diagnosis was established by the detection of CMV DNA by polymerase chain reaction analysis of aqueous and/or vitreous humour. CD4+ T-lymphocyte count was reduced in two patients and normal in the third one. There was bilateral involvement in two of the three patients. There was delay of 8-10 months in diagnosis. The visual outcome was poor in four out of the five eyes involved owing to optic atrophy or total retinal detachment with proliferative vitreoretinopathy.

CONCLUSION

Increased awareness of CMV retinitis in patients who have received immunosuppression for haematological malignancies, such as CLL, could lead to earlier diagnosis and possibly better visual outcome.

Dilated examination of patients referred with minor lid complaints--is it necessary?

OBJECTIVE

To evaluate whether dilated fundus examination is necessary on patients presenting to clinic with lid complaints and normal vision.

METHODS

Patients with lid complaints were recruited from general and emergency clinics. Patients with visual symptoms or previous ophthalmic history were excluded. Subjects were examined by a junior ophthalmologist with slit-lamp biomicroscopy and Goldmann tonometry. Dilated posterior segment examination was performed with a Volk lens and the peripheral retina was examined with a three-mirror contact lens.

RESULTS

A total of 100 patients (200 eyes) were recruited, 63 females and 37 males with an average age of 45 years (SD of 19 years). The majority of lid abnormalities were chalazia (66) and papilloma (21). Posterior segment findings were early cataracts in five cases (eight eyes), macular drusen in three cases (five eyes), peripheral retinal lattice degeneration in two cases (three eyes), retinal pigment epithelial changes in one case (two eyes), a choroidal naevus in one eye, choroidal atrophy in one eye, and one case with asymmetric disc cupping. Six patients were seen by senior ophthalmologists and all were discharged after the first visit.

CONCLUSIONS

In our sample of 100 patients presenting with lid complaints and normal visual acuity, dilated examination revealed no sight-threatening conditions that required further treatment or regular follow-up. Therefore, a single episode of screening for nonspecified retinal disease in a group with no particular risk factors is an inefficient screening method.

Synthesis of nanocrystalline La(Ca)CrO3 through a novel gel combustion process and its characterization

La(Ca)CrO3 (LCC) powders have been prepared through a novel gel combustion route using metal nitrates as oxidizers and ethylene diamine tetraacetic acid (EDTA) as a fuel. The process involves the combustion of a viscous gel obtained through mixed metal nitrate-EDTA solution. The effect of amount of EDTA used in the process on the nature of combustion reaction, phase formation, and densification has been studied. It was found that use of the fuel-rich precursor facile in controlling the reaction, which in turn helps in the scale up of the batch size. The calcination of the fuel-rich gel precursor at 650 degrees C resulted in the well-crystalline LCC along with a small amount of calcium chromate as a secondary phase. The HRSEM studies on the powder showed agglomerated nanoparticles. The average agglomerate size was found to be 0.54 microm. The cold pressing and sintering of the calcined powder at 1250 degrees C resulted in the mono-phasic La0.70Ca0.30CrO3 with 94% of its theoretical density. The sintered sample exhibited conductivity of 51 S/cm at 1000 degrees C. The average linear thermal expansion coefficient was found to be 10.3 x 10(-6) degrees C(-1).

Correlation of phase transition with the change in TL characteristics in CaSO4:Dy phosphor--effect of thermal treatment

The study is aimed at optimising the glow curve structure of CaSO4:Dy phosphor for dosimetric purpose and also to understand the observed changes owing to thermal treatment in the thermoluminescence (TL) sensitivity and glow curve structure. The reversible changes in the intensities of the lower temperature satellite peak and the main dosimetric glow peak with temperature of thermal treatment in the temperature range 400-700 degrees C indicates the interconversion of defect complexes responsible for the glow peaks in CaSO4:Dy. Phosphor samples subjected to thermal treatment in temperature range beyond 800 degrees C, showed irreversible changes in the intensities of the lower temperature and dosimetric peaks. The changes in TL characteristics of the phosphor for thermal treatments >800 degrees C are attributed to the partial phase transition in the phosphor as confirmed by the XRD and TG/DTA analysis of the phosphor.

Nanocrystalline ceria powders through citrate-nitrate combustion

Nanocrystalline ceria powders have been synthesized by combustion technique using citric acid as a fuel and nitrate as an oxidizer. The auto-ignition of the gels containing cerium nitrate and citric acid resulted in ceria powders. A theory based on adiabatic flame temperature for different citric acid-to-cerium nitrate molar ratios has been proposed to explain the nature of combustion reaction and its correlation with the powder characteristics. Specific surface area and primary particle size of the ceria powder obtained through fuel-deficient precursor was found to be approximately = 127 m2/g and 2.5-10 nm, respectively. The combustion synthesized ceria powder when cold pressed and sintered in air at 1250 degrees C for 1 hour resulted in approximately = 96% of its theoretical density with sub-micron grains.

Mapping of a major QTL for pre-harvest sprouting tolerance on chromosome 3A in bread wheat

Quantitative trait loci (QTL) analysis was conducted for pre-harvest sprouting tolerance (PHST) in bread wheat for a solitary chromosome 3A, which was shown to be important for this trait in earlier studies. An inter-varietal mapping population in the form of recombinant inbred lines (RILs) developed from a cross between SPR8198 (a PHS tolerant genotype) and HD2329 (a PHS susceptible cultivar) was used for this purpose. The parents and the RIL population were grown in six different environments and the data on PHS were collected in each case. A framework linkage map of chromosome 3A with 13 markers was prepared and used for QTL analysis. A major QTL (QPhs.ccsu-3A.1) was detected on 3AL at a genetic distance of approximately 183 cM from centromere, the length of the map being 279.1 cM. The QTL explained 24.68% to 35.21% variation in individual environments and 78.03% of the variation across the environments (pooled data). The results of the present study are significant on two counts. Firstly, the detected QTL is a major QTL, explaining up to 78.03% of the variation and, secondly, the QTL showed up in all the six environments and also with the pooled data, which is rather rare in QTL analysis. The positive additive effects in the present study suggest that a superior allele of the QTL is available in the superior parent (SPR8198), which can be used for marker-aided selection for the transfer of this QTL allele to obtain PHS-tolerant progeny. It has also been shown that the red-coloured grain of PHS tolerant parent is not associated with the QTL for PHST identified during the present study, suggesting that PHS tolerant white-grained cultivars can be developed.

Structural characterization, expression analysis and evolution of the red/far-red sensing photoreceptor gene, phytochrome C (PHYC), localized on the 'B' genome of hexaploid wheat (Triticum aestivum L.)

Phytochromes are a family of red/far-red light perceiving photoreceptors. The monocot phytochrome family is represented by three members, PHYA, PHYB and PHYC. We have isolated and characterized the first PHY gene member (TaPHYC) from common wheat, Triticum aestivum var. CPAN1676. It codes for a species of the photoreceptor, phyC, which is known to be light-stable in all plants analyzed so far. A sequence of 7.2 kb has been determined, which includes 3.42 kb of coding region. This is the second full-length PHYC gene sequenced from a monocot (first was from rice). TaPHYC gene shares structural similarities with the rice PHYC containing four exons and three introns in the coding region. The 5' UTR is 1.0-kb-long and harbors an upstream open reading frame (URF) encoding 28 aa. Southern blot analysis of TaPHYC indicates that it represents single locus in the wheat genome, although the possibility of additional loci cannot be completely ruled out. Chromosomal localization using nullisomic-tetrasomic lines of Triticum aestivum var. Chinese Spring places TaPHYC on chromosome 4B. PHYC represents a constitutively expressed gene in all the organs tested and under light/dark conditions. However, PHYC was found to be developmentally regulated showing maximal expression in 3-day-old dark-grown seedlings, which declined thereafter. In silico analysis has also been done to compare TaPHYC gene with the partial sequences known from other wheat species and cultivars. The presence of a topoisomerase gene immediately downstream of the PHYC gene, both in rice and wheat genomes, presents yet another example of synteny in cereals and its possible significance has been discussed.

Utilization of composted sugar industry waste (pressmud) to improve properties of sodic soil for rice cultivation

Sulphitation pressmud (SPM) and its composts were prepared by heap, pit, NADEP and vermicomposting methods and their effects were compared with soil properties and growth, yield and nutrient uptake by rice in a sodic soil under pot conditions. Application of 15 t ha(-1) SPM and its different composts significantly increased the plant height and dry matter accumulation at different intervals, grain and straw yields and N, P and K uptake by the crop over the control. NADEP compost of SPM alone recorded the maximum and significant plant height by 8.5 to 19.3% and plant dry matter by 14.6 to 32.8% over the raw SPM at different intervals. NADEP composts of SPM alone and SPM + rice straw were also found to be superior than raw SPM by recording 34.8 and 27.8% more grain yield respectively. The SPM composts prepared by NADEP and SPM by vermicomposting methods significantly accumulated higher N and K in rice grains and straw, while NADEP compost of SPM and SPM + rice straw recorded more P in grains and straw than raw SPM. Application of SPM and its composts reduced the pH, EC and bulk density of the soil after rice harvesting, though the reductions were not significant in comparison to the control. However, these treatments increased the soil organic C by 33.33 to 69.0%, available N by 41.4 to 74.8%, available P by 47.1 to 97.8%, available K by 11.8 to 59.2% and available S by 10.3 to 90.7% over the control. NADEP composts, in general, were found to be superior than the raw SPM and other composts in residual soil nutrient content after rice crop.

Increased expression of Mycobacterium tuberculosis 19 kDa lipoprotein obliterates the protective efficacy of BCG by polarizing host immune responses to the Th2 subtype

Mycobacterium tuberculosis can not only neutralize immune effector functions, but also has the ability to modulate host-signalling cascades involved in the development of these responses. The 19 kDa antigen (Rv3763), a lipoprotein of M. tuberculosis, elicits high levels of interleukin (IL)-12 from macrophages in addition to its powerful immunomodulatory properties, leading to suppression of antigen-presentation signalling cascades. The present study was aimed at analysing the effect of overexpression of this antigen on the immunostimulatory properties of M. bovis Bacille Calmette-Guerin (BCG). We have constructed a recombinant BCG strain (rBCG19N) producing higher levels of the 19 kDa antigen in both the cytoplasmic (approximately eightfold) and extracellular (approximately fivefold) fractions as compared to the wildtype BCG. Immunization of mice with rBCG19N elicited high levels of interferon-gamma (IFN-gamma) and relatively low levels of IL-10 against the purified 19 kDa antigen. However, in response to total BCG sonicate, mice immunized with rBCG19N produced significantly high levels of IL-10 with relatively very low levels of IFN-gamma. This polarization of the host immune responses towards T-helper 2 subtype resulted in complete abrogation of the protective efficacy of BCG, when rBCG19N was used as a live vaccine against M. tuberculosis challenge in guinea pigs.