Administration of Ascorbic Acid to Prevent Bleaching-induced Tooth Sensitivity: A Randomized Triple-blind Clinical Trial

This study evaluated the effect of ascorbic acid, 500 mg every eight hours, on bleaching-induced tooth sensitivity. A triple-blind, parallel design, and placebo-controlled randomized clinical trial was conducted on 39 adults. The pills (placebo or ascorbic acid) were administered three times per day for 48 hours; the first dose was given one hour prior to each bleaching session. Two bleaching sessions with 35% hydrogen peroxide gel were performed with a one-week interval. Tooth sensitivity was recorded up to 48 hours after bleaching. The color evaluation was performed before and 30 days after bleaching. The absolute risk and intensity of tooth sensitivity were evaluated by Fisher exact and Mann-Whitney U-tests, respectively. Color changes were evaluated by unpaired t-test (α=0.05). There were no significant differences in the absolute risk and intensity of tooth sensitivity and color change between the groups. Both groups showed a similar risk of tooth sensitivity (p>0.05). The perioperative use of an antioxidant, such as ascorbic acid (500 mg, three times daily) perorally, was not able to prevent bleaching-induced tooth sensitivity or reduce its intensity.

A New Universal Simplified Adhesive: 18-Month Clinical Evaluation

Purpose

To evaluate the 18-month clinical performance of a multimode adhesive (Scotchbond Universal Adhesive, SU, 3M ESPE, St Paul, MN, USA) in noncarious cervical lesions (NCCLs) using two evaluation criteria.

Materials and Methods

Thirty-nine patients participated in this study. Two-hundred restorations were assigned to four groups: ERm, etch-and-rinse + moist dentin; ERd, etch-and-rinse + dry dentin; Set, selective enamel etching; and SE, self-etch. The composite resin, Filtek Supreme Ultra (3M ESPE), was placed incrementally. The restorations were evaluated at baseline, and at 18 months, using both the World Dental Federation (FDI) and the United States Public Health Service (USPHS) criteria. Statistical analyses were performed using Friedman repeated-measures analysis of variance by rank and McNemar test for significance in each pair (α=0.05).

Results

Five restorations (SE: 3; Set: 1; and ERm: 1) were lost after 18 months (p>0.05 for either criteria). Marginal staining occurred in four and 10% of the restorations evaluated (p>0.05), respectively, for USPHS and FDI criteria. Nine restorations were scored as bravo for marginal adaptation using the USPHS criteria and 38%, 40%, 36%, and 44% for groups ERm, ERd, Set, and SE, respectively, when the FDI criteria were applied (p>0.05). However, when semiquantitative scores (or SQUACE) for marginal adaptation were used, SE resulted in a significantly greater number of restorations, with more than 30% of the total length of the interface showing marginal discrepancy (28%) in comparison with the other groups (8%, 6%, and 8%, respectively, for ERm, ERd, and Set).

Conclusions

The clinical retention of the multimode adhesive at 18 months does not depend on the bonding strategy. The only differences between strategies were found for the parameter marginal adaptation, for which the FDI criteria were more sensitive than the USPHS criteria.

Immediate adhesive properties to dentin and enamel of a universal adhesive associated with a hydrophobic resin coat

OBJECTIVES

To evaluate the effect of acid etching and application of a hydrophobic resin coat on the enamel/dentin bond strengths and degree of conversion (DC) within the hybrid layer of a universal adhesive system (G-Bond Plus [GB]).

METHODS

A total of 60 extracted third molars were divided into four groups for bond-strength testing, according to the adhesive strategy: GB applied as a one-step self-etch adhesive (1-stepSE); GB applied as in 1-stepSE followed by one coat of the hydrophobic resin Heliobond (2-stepSE); GB applied as a two-step etch-and-rinse adhesive (2-stepER); GB applied as in 2-stepER followed by one coat of the hydrophobic resin Heliobond (3-stepER). There were 40 teeth used for enamel microshear bond strength (μSBS) and DC; and 20 teeth used for dentin microtensile bond strength (μTBS) and DC. After restorations were constructed, specimens were stored in water (37°C/24 h) and then tested at 0.5 mm/min (μTBS) or 1.0 mm/min (μSBS). Enamel-resin and dentin-resin interfaces from each group were evaluated for DC using micro-Raman spectroscopy. Data were analyzed with two-way analysis of variance for each substrate and the Tukey test (α=0.05).

RESULTS

For enamel, the use of a hydrophobic resin coat resulted in statistically significant higher mean enamel μSBS only for the ER strategy (3-stepER vs 2-stepER, p<0.0002). DC was significantly improved for the SE strategy (p<0.00002). For dentin, the use of a hydrophobic resin coat resulted in significantly higher dentin mean μTBS only for the SE strategy (2-stepSE vs 1-stepSE, p<0.0007). DC was significantly improved in groups 2-stepSE and 3-stepER when compared with 1-stepSE and 2-stepER, respectively (p<0.0009).

CONCLUSIONS

The use of a hydrophobic resin coat may be beneficial for the selective enamel etching technique, because it improves bond strengths to enamel when applied with the ER strategy and to dentin when used with the SE adhesion strategy. The application of a hydrophobic resin coat may improve DC in resin-dentin interfaces formed with either the SE or the ER strategy. On enamel, DC may benefit from the application of a hydrophobic resin coat over 1-stepSE adhesives.

The Effect of Perioperative Ibuprofen Use on Tooth Sensitivity Caused by In-Office Bleaching

Objective:

This study determined the effect of the administration of perioperative ibuprofen 400 mg on tooth sensitivity caused by in-office bleaching.

Methods:

A triple-blind, parallel-design, randomized clinical trial was conducted on 30 adults who received placebo or ibuprofen before and after bleaching. The drugs were administered three times per day for 48 hours; the first dose was given one hour prior to the bleaching treatment. Two bleaching sessions with 35% hydrogen peroxide gel were performed with a one-week interval. Tooth sensitivity was recorded on two scales: visual analogue and five-point verbal rating scale up to 48 hours after bleaching. The shade evaluation was performed with a visual shade guide and spectrophotometer, before and 30 days after bleaching. The absolute risk of tooth sensitivity and its intensity were evaluated by Fisher exact and Mann-Whitney tests, respectively. The shade changes were evaluated by Student's t-test.

Results:

Both groups showed similar absolute risk of tooth sensitivity (p&gt;0.05). Lower tooth sensitivity was observed in the experimental group only up to one hour postbleaching (p=0.04). Similar tooth sensitivity was observed in the other periods of time.

Conclusion:

The perioperative use of the anti-inflammatory ibuprofen was not able to avoid tooth sensitivity but reduced its intensity up to one hour after bleaching.

Structural motifs in primary oxidation products of palmitoyl-arachidonoyl-phosphatidylcholines by LC-MS/MS

Oxidative modifications to phospholipids (OxPL) play a major role in modulating signaling events in inflammation and infection, and complete understanding on the induced biological effects can only be understood based on knowledge of the oxidative motifs present. Specific neutral losses observed in tandem mass spectrometry data (LC-MS/MS) of primary peroxidation products in oxidized palmitoyl-arachidonoyl-phosphatidylcholines (OxPAPC) provide information on the prevailing structural motifs regarding the oxidized acyl carbon chain, the nature of oxidized group and the site of carbon oxidation. The higher hydrophobicity of hydroperoxides compared to di-hydroxy derivatives under reverse-phase conditions together with specific fragmentation patterns enabled the identification of 12 structurally different OxPAPC structural (di-hydroxy and hydroperoxide derivatives) and positional isomers as well as the presence of poly-hydroxy together with isoprostanes derivatives. The fragmentation patterns described in quadrupole time-of-flight and linear ion trap instruments complement the m/z value and retention time parameters in the identification of oxidative composition in OxPAPC products becoming a valuable tool for the exploratory screening of oxidized phosphatidylcholines in OxPAPC extracts, distinction of native and modified PC isobaric structures in complex samples contributing to the increased understanding of redox lipidomics in inflammation and infection.

Clinical Effects of Exposure to Coffee During At-home Vital Bleaching

The purpose of the present study was to evaluate whether exposure to coffee during bleaching treatment with 16% carbamide peroxide (CP) affects the degree of whitening and tooth sensitivity. Forty patients with central incisors darker than A2 were selected. Participants who did not drink coffee were assigned to the control group (CG), while participants who drink coffee at least twice a day were assigned to the experimental group (EG). For CG, foods with dyes were restricted. For EG there was no restriction on food and patients were asked to make coffee rinses for 30 seconds, four times daily. For both groups 16% CP was used for a period of three hours daily for three weeks. Shade evaluation was assessed visually by Vita classical shade guide and by the Easyshade spectrophotometer at baseline, during bleaching (first, second, and third weeks), and postbleaching (one week and one month). Patients recorded their sensitivity perceptions by means of the numerical rating scale and 0-10 visual analog scales. Variation in shade guide units and the two colors (ΔE) were evaluated by two-way analysis of variance and Tukey tests (α=0.05). Absolute risk of tooth sensitivity and intensity of tooth sensitivity was evaluated by Fisher exact and Mann-Whitney tests (α=0.05). Effective bleaching was observed for both groups after three weeks, without statistical difference. No difference in terms of risk of tooth sensitivity and intensity of tooth sensitivity was detected between groups. Approximately 57% of the participants experienced tooth sensitivity, which was recorded mainly as “mild.” Exposure to coffee during bleaching treatment does not seem to affect the degree of bleaching and tooth sensitivity.

Effect of Operator Experience on the Outcome of Fiber Post Cementation With Different Resin Cements

Objectives

To evaluate the influence of operator experience (dentist vs student) and cementation system (Adper Scotchbond Multi-Purpose [SBMP] + RelyX ARC [1]; Adper Single Bond 2 [SB] + RelyX ARC [2] and RelyX U100 [3]) on the push-out bond strength (BS) of fiber post to radicular dentin.

Materials and Methods

The roots of 48 extracted human maxillary central incisors were prepared and divided into six groups (n=8), according to combination of the above factors. Glass fiber posts were cemented in accordance with the instructions of the manufacturer of each cementation system. After water storage at 37°C for one week, the roots were cross-sectioned into six 1-mm thick slices and the push-out test was performed (0.5 mm/min). Data were statistically analyzed by two-way analysis of variance and Tukey tests (α=0.05). The BS results obtained by dentist and student for each cementation system were compared using the Student t-test (α=0.05).

Results

Higher BS means were observed for the expert operators, irrespective of the cementation system used (p=0.006). RelyX U100 showed the highest bond strength, but it did not differ from SBMP + RelyX ARC. The Student t-test revealed that only RelyX U100 was not affected by the operator's experience.

Conclusion

Within the limitations of this in vitro study, it can be concluded that the self-adhesive cement RelyX U100 showed the highest bond strength to the root canal in the student's group, and its performance was not affected by the operator's experience.

Overview of Clinical Alternatives to Minimize the Degradation of the Resin-dentin Bonds

The incorporation of hydrophilic and acidic resin monomers substantially improved the initial bonding of contemporary etch-and-rinse (ER) and self-etch (SE) adhesives to intrinsically wet dental substrates, providing quite favorable immediate results, regardless of the bonding approach used. However, in the long term, the bonding effectiveness of most simplified ER and SE adhesives drop dramatically. This review examines the fundamental processes that are responsible for the aging mechanisms involved in the degradation of the resin-bonded interfaces and some possible clinical approaches that have been effective in minimizing or even preventing the degradation of the adhesive interfaces produced with simplified adhesives. The incorporation of some of the feasible approaches - described in this review - may improve the quality of the adhesive restorations performed in clinical practice, while manufacturers develop bonding materials that are less susceptible to the aging mechanisms present in the oral environment.

Enhanced lipidic algae biomass production using gas transfer from a fermentative Rhodosporidium toruloides culture to an autotrophic Chlorella protothecoides culture

In order to produce single-cell oil for biodiesel, a yeast and a microalga were, for the first time, grown in two separate reactors connected by their gas-phases, taking advantage of their complementary nutritional metabolisms, i.e., respiration and photosynthesis. The yeast Rhodosporidium toruloides was used for lipid production, originating a carbon dioxide-enriched outlet gas stream which in turn was used to stimulate the autotrophic growth of Chlorella protothecoides in a vertical-alveolar-panel (VAP) photobioreactor. The microalgal biomass productivity was 0.015 gL(-1)h(-1), and its lipid productivity attained 2.2 mgL(-1)h(-1) when aerated with the outlet gas stream from the yeast fermenter. These values represent an increase of 94% and 87%, respectively, as compared to a control culture aerated with air. The CO2 bio-fixed by the microalgal biomass reached an estimated value of 29 mgL(-1)h(-1) in the VAP receiving the gas stream from the fermenter, a value 1.9 times higher than that measured in the control VAP.

Identification of Fusarium oxysporum f. sp. lycopersici Race 3 Infecting Tomatoes in Northeast Brazil

The three races of Fusarium oxysporum f. sp. lycopersici (FOL) are important tomato pathogens throughout the world, causing severe economic losses (1). In Brazil, races 1 and 2 are widespread, but the current geographic distribution of race 3 is restricted to the mild climate areas of Espírito Santo and Rio de Janeiro States in the southeast region (2,3). Here we report the spread of FOL race 3 to the warm northeast region of Brazil. Plants in commercial fields of the hybrid 'Alambra' (resistant to FOL races 1 and 2) were found displaying chlorosis, vascular browning, and wilt symptoms in Jaguaquara County, Bahia State, Brazil. Disease incidence ranged from 10 to 50%. The virulence profile of six isolates obtained from three distinct tomato-producing fields was investigated by root-dipping inoculation (10⁶ conidia/ml) of 21-day-old seedlings from a set of FOL race differential accessions: 'Ponderosa' (susceptible to all races), 'IPA-5' (FOL race 1 resistance; I-1 locus); 'Alambra' and 'Floradade' (FOL races 1 and 2 resistance; I-2 gene), and Solanum pennellii 'LA 716' (resistant to all three races; I-3 locus). All six isolates were able to induce severe wilt symptoms in 100% of the plants from all lines but S. pennellii 'LA 716'. FOL race 3 identity was confirmed via PCR assays employing a specific set of primers that are able to discriminate all the three FOL races as well as F. oxysporum f. sp. radicis-lycopersici isolates (1). Total DNA was extracted from pure fungal colonies growing in agar medium. The typical FOL race 3 amplicon profiles (i.e. positive for the primers uni, sp13, and sp23 and negative for the primer sprl) were observed only in the six FOL 3 isolates from Bahia as well as in five reference isolates of race 3 (previously obtained from tomato in Espírito Santo and Rio de Janeiro States), thus confirming their race identities. This recent, fast, and wide geographic expansion of the FOL race 3 in Brazil suggests that the pathogen has been introduced into new tomato producing areas via either contaminated seeds or seedlings. Because of the complexity of establishing effective chemical and cultural control strategies, these epidemics caused by FOL race 3 in distinct areas of Brazil might cause the replacement of the currently grown susceptible hybrids by resistant ones. References: (1) Y. Hirano and T. Arie. J. Gen. Plant Pathol. 72:273, 2006; (2) A. Reis et al. Fitopatol. Bras. 30:426, 2005; (3) A. Reis and L. S. Boiteux. Hort. Bras. 25:451, 2007.

Efficacy of and effect on tooth sensitivity of in-office bleaching gel concentrations: a randomized clinical trial

With the aim of reducing the side effects of in-office bleaching agents, less-concentrated hydrogen peroxide (HP) gels have been released by manufacturers. We evaluated the tooth sensitivity (TS) and bleaching efficacy (BE) of two HP concentrations in this study. Gels containing 35% and 20% HP (HP35 and HP20, respectively) were applied on teeth of 60 caries-free patients. Color was recorded at baseline and one week after the first and second bleaching sessions using the Vita Classical shade guide. TS was recorded on a 0-4 scale. BE at each weekly recall was evaluated by Kruskall-Wallis and Mann-Whitney tests (α=0.05). Absolute risk of TS and its intensity was evaluated by Fisher exact and Mann-Whitney tests, respectively (α=0.05). After two bleaching sessions, color change of approximately eight tabs was obtained with HP35; whereas, with HP20 it was six tabs (p<0.05). Only 26.7% (HP35) and 16.7% (HP20) of the participants reported TS, and no statistical differences were detected among them. Both in-office bleaching gels showed similar TS intensity, but the 35% HP agent produced faster bleaching.

Prevalence of Babesia microti-like infection in red foxes (Vulpes vulpes) from Portugal

The prevalence of piroplasm (order Piroplasmida) infection was assessed in blood and bone marrow samples from 91 red foxes (Vulpes vulpes) from northern, central and southern Portugal by means of molecular methods. PCR for the 18S rRNA gene of Babesia spp. followed by sequencing revealed 63 foxes positive for the Babesia microti-like piroplasm (syn. Theileria annae) (69.2%; 95% confidence interval [CI]: 58.7-78.5%) and one fox positive for Babesia canis (1.1%; 95% CI: 0.0-6.0%). Positivity to the B. microti-like piroplasm or B. canis in 43 blood samples (83.7%) was significantly higher (p<0.001) than in 43 paired bone marrow samples (20.9%). There were no statistically significant differences in the prevalence of infection between genders (p=0.219) or age groups (<2 years vs. ≥ 2 years) (p=1.0). This is the first report of the B. microti-like piroplasm in foxes from Portugal as well as the first report on detection by PCR and genotyping of B. canis in a red fox worldwide. A natural cycle of the B. microti-like piroplasm is suggested in red fox populations based on the high prevalence of the protozoan. Red foxes might be a reservoir of the B. microti-like piroplasm and a source of infection to dogs.

Effect of bur roughness on bond to sclerotic dentin with self-etch adhesive systems

PURPOSE

To evaluate the effect of bur roughness on bond strength values and conditioner pattern of two-step self-etch adhesives applied on sclerotic dentin.

METHODS

The roots of 48 bovine incisors were removed and the crowns were divided into four groups: the control group (CO) teeth were left untreated or the teeth were slightly roughened with coarse-, medium-, or fine-grit diamond burs. Next, the teeth were subdivided and Clearfil SE Bond (CSE) and Adper SE Bond (ASE) were applied according to the manufacturers' instructions. Composite resin (Opallis) buildups were incrementally constructed on the bonded surfaces. After storage for 24 hours in distilled water at 37°C, the teeth were sectioned into sticks (area of 0.8 mm(2)). The sticks were stressed until failure by tensile forces (0.5 mm/min). Additionally, eight bovine teeth were treated as previously described, and after adhesive application, the surface was rinsed off and examined by scanning electron microscopy to measure the relative number of open tubules (OT). Data (MPa) were analyzed by two-way analysis of variance and Tukey test (p=0.05).

RESULTS

CO showed the highest bond strength values (p<0.05). As regards OT, the lowest mean was observed for CO (p<0.05) and the highest was found after application of CSE or ASE (p<0.05).

In-Frame Deletion and Missense Mutations of the C-Terminal Helicase Domain of SMARCA2 in Three Patients with Nicolaides-Baraitser Syndrome

Using high-resolution molecular karyotyping with SNP arrays to identify candidate genes for etiologically unexplained intellectual disability, we identified a 32-kb de novo in-frame deletion of the C-terminal helicase domain of the SMARCA2 gene in a patient with severe intellectual disability, epilepsy, sparse hair, prominent joints, and distinct facial anomalies. Sequencing of the gene in patients with a similar phenotype revealed de novo missense mutations in this domain in 2 further patients, pointing to a crucial role of the SMARCA2 C-terminal helicase domain. The clinical features observed in all 3 patients are typical of Nicolaides-Baraitser syndrome, an only rarely reported syndrome with mainly moderate to severe intellectual disability. Notably, one of our patients with a p.Gly1132Asp mutation showed typical morphological features but an exceptional good development with borderline overall IQ and learning difficulties, thus expanding the phenotypic spectrum of Nicolaides-Baraitser syndrome.

Adhesive temperature: effects on adhesive properties and resin-dentin bond strength

OBJECTIVES

To evaluate the effect of adhesive temperature on the resin-dentin bond strength (μTBS), nanoleakage (NL), adhesive layer thickness (AL), and degree of conversion (DC) of ethanol/water- (SB) and acetone-based (PB) etch-and-rinse adhesive systems.

METHODS

The bottles of the two adhesives were kept at each temperature (5°C, 20°C, 37°C, and 50°C) for 2 hours before application to demineralized dentin surfaces of 40 molars. Specimens were prepared for μTBS testing. Bonded sticks (0.8 mm(2)) were tested under tension (0.5 mm/min). Three bonded sticks from each tooth were immersed in silver nitrate and analyzed by scanning electron microscopy. The DC of the adhesives was evaluated by Fourier transformed infrared spectroscopy.

RESULTS

Lower μTBS was observed for PB at 50°C. For SB, the μTBS values were similar for all temperatures. DC was higher at 50°C for PB. Higher NL and thicker AL were observed for both adhesives in the 5°C and 20°C groups compared to the 37°C and 50°C groups. The higher temperatures (37°C or 50°C) reduced the number of pores within the adhesive layer of both adhesive systems.

CONCLUSIONS

It could be useful to use an ethanol/water-based adhesive at 37°C or 50°C and an acetone-based adhesive at 37°C to improve adhesive performance.

Clinical effects of prolonged application time of an in-office bleaching gel

OBJECTIVE

The aim of this study was to evaluate whether the use of a gel applied for 1 × 45 minutes would have the same bleaching rate and tooth sensitivity levels when compared with 3 × 15-minute applications.

METHODS

In-office bleaching was performed in 30 participants with 35% hydrogen peroxide gel. In one group (n=15; 3 x 15 minutes), the bleaching agent was refreshed every 15 minutes, three times at each bleaching appointment. In the other group (n=15; 1 x 45 minutes) the gel was left undisturbed on the buccal surfaces of all teeth for 45 minutes at each bleaching appointment. This protocol was repeated after one week. The bleaching evaluation was completed by two blinded, calibrated evaluators who compared the baseline color of the maxillary anterior teeth with a value-oriented shade guide after each period. The patients recorded the tooth sensitivity on a 0-4 scale. The color changes were evaluated by appropriate tests (α=0.05). The percentage of patients with tooth sensitivity and its intensity were also statistically analyzed (α=0.05), respectively.

RESULTS

The use of gel for a single 45-minute period (1 x 45 minutes) decreased the bleaching efficacy (p<0.05) 86.7%, and 100% of patients from the 3 × 15-minute and 1 × 45-minute groups, respectively, experienced tooth sensitivity (p=0.22). The intensity of sensitivity was lower for the 3 × 15-minute applications (p=0.04).

CONCLUSIONS

A 35% hydrogen peroxide gel for in-office bleaching preferably should be applied in three 15-minute applications because 1 × 45 minutes reduces the bleaching speed and slightly increases the intensity of tooth sensitivity.

Effect of light activation on tooth sensitivity after in-office bleaching

This clinical study evaluated the effects of light-emitting diode (LED)/laser activation on bleaching effectiveness (BE) and tooth sensitivity (TS) during in-office bleaching. Thirty caries-free patients were divided into two groups: light-activated (LA) and non-activated (NA) groups. A 35% hydrogen peroxide gel (Whiteness HP Maxx, FGM Dental Products, Joinville SC, Brazil) was used in three 15-minute applications for both groups. For the LA group, LED/laser energy (Whitening Lase Light Plus, DMC Odontológica, São Carlos SP, Brazil) was used, in accordance with the manufacturer's directions. Two sessions of bleaching were performed at one-week intervals. Color was registered at baseline and after the first and second bleaching sessions using a Vita shade guide. Patients recorded TS on a 0 to 4 scale during bleaching and within the next 24 and 48 hours of each session. BE at recall each week and intensity of TS were evaluated by repeated measures analysis of variance (ANOVA) and Tukey tests (α=0.05). Tooth sensitivity was compared using the Friedman repeated measures analysis of variance by rank and the Wilcoxon sign-ranked test. Faster bleaching was observed for the LA group than for the NA group after the first session (4.8 and 3.8 shade guide units [SGUs]; p=0.0001). However, both techniques were capable of bleaching the same number of SGUs after the second bleaching session (p=0.52). Most of the LA group (53.3%) had sensitivity even 24 hours after each bleaching session, but only 26.6% from the NA group reported TS. The intensity of TS was similar for both groups immediately after bleaching but significantly higher for the LA group 24 hours after each bleaching session (p=0.001). After two bleaching sessions, the use of LED/laser light activation did not improve bleaching speed. Persistent tooth sensitivity and higher tooth sensitivity after 24 hours of bleaching were observed when light activation was used.

Evaluation of risk loci for schizophrenia derived from genome-wide association studies in a German population

In the genome-wide association study (GWAS) on schizophrenia [O'Donovan et al. (2008); Nat Genet 40:1053–1055] a UK-sample of 479 cases with DSM-IV schizophrenia was genotyped in comparison to control subjects with follow up of 12 putative loci in international replication sets of approximately 15,000 cases and controls. In these cohorts and a combined bipolar and schizophrenia UK-sample, six single nucleotide polymorphisms (SNPs) supported association, with the strongest evidence for SNP-marker rs1344706 at the zinc finger ZNF804A locus on chromosome 2q32.1 (P = 1.61 × 10−7). We attempted replication of these findings in a German population of 2,154 individuals (632 with affective disorders, 937 with schizophrenia, and 585 controls), but found none of the GWAS risk alleles significantly associated with psychosis. Particularly rs1344706, initially surpassing the genome-wide significance level in an extended phenotype of schizophrenia and affective disorder, produced consistently negative results. At the ZNF804A locus estimated Odds ratios reached 1.08 (0.93–1.26 95% CI) for the schizophrenia sample and 1.04 (0.90–1.20 95% CI) for the combined set of cases with schizophrenia and affective disorder. The main limitation of our study may be the reduced power of the sample size, but our data may be useful for future meta-analysis of GWA data sets. Although GWAS have proven extraordinary successful in identifying susceptibility genes for complex genetic disorders, the hypothesis of common genetic variants in the complex group of the schizophrenic psychoses with small effect size but relatively high frequency is still put to further scrutiny.

Assessment of Tooth Sensitivity Using a Desensitizer Before Light-activated Bleaching

The use of a desensitizing gel before light-activated in-office bleaching does not eliminate, but may reduce, the duration of this side effect.

Disturbed Wnt Signalling due to a Mutation in CCDC88C Causes an Autosomal Recessive Non-Syndromic Hydrocephalus with Medial Diverticulum

The etiology of non-syndromic hydrocephalus is poorly understood. Via positional cloning in a consanguineous family with autosomal recessive hydrocephalus we have now identified a homozygous splice site mutation in the CCDC88C gene as a novel cause of a complex hydrocephalic brain malformation. The only living patient showed normal psychomotor development at the age of 3 years and 3 months and her deceased aunt, who was assumed to suffer from the same condition, had mild mental retardation. The mutation in the affected patients, a homozygous substitution in the donor splice site of intron 29, resulted in a shorter transcript due to exclusion of exon 29 and loss of functional protein, as shown by Western blotting (p.S1591HfsX7). In normal human tissue panels, we found CCDC88C ubiquitously expressed, but most prominently in the fetal brain, especially in pons and cerebellum, while expression in the adult brain appeared to be restricted to cortex and medulla oblongata. CCDC88C encodes DAPLE (HkRP2), a Hook-related protein with a binding domain for the central Wnt signalling pathway protein Dishevelled. Targeted quantitative RT-PCR and expression profiling of 84 genes from the Wnt signalling pathway in peripheral blood from the index patient and her healthy mother revealed increased mRNA levels of CCDC88C indicating transcriptional upregulation. Due to loss of CCDC88C function β-catenin (CTNNB1) and the downstream target LEF1 showed increased mRNA levels in the patient, but many genes from the Wnt pathway and transcriptional target genes showed reduced expression, which might be explained by a complex negative feedback loop. We have thus identified a further essential component of the Wnt signalling pathway in human brain development.

A Randomized Clinical Evaluation of a One- and Two-step Self-etch Adhesive Over 24 Months

The application of an extra hydrophobic bond layer over the self-etch adhesive system improved clinical performance over a 24-month period, mainly in terms of retention rate.

Durability of Surface Treatments and Intermediate Agents Used for Repair of a Polished Composite

In order to reach high composite repair strength, it is advisable to sandblast the polished composite surface with aluminum oxide. A hydrophobic intermediate agent should then be applied in order to prolong durability of the composite repair.

New hosts of Myrothecium SPP. In brazil and a preliminary In Vitro assay of fungicides

Myrothecium roridum and M. verrucaria are two plant pathogenic species causing foliar spots in a large number of cultivated plants. This paper aims to study the causal agents of foliar spots in vegetable crops (sweet pepper, tomato, cucumber), ornamental plants (Spathiphyllum, Solidago canadensis, Anthurium, Dieffenbachia) and a solanaceous weed plant (Nicandra physalodes). Most of the isolates were identified as M. roridum; only the isolate ‘Myr-02’ from S. canadensis was identified as M. verrucaria. All the isolates were pathogenic to their original plant hosts and also to some other plants. Some fungicides were tested in vitro against an isolate of M. roridum and the mycelial growth recorded after seven days. Fungicides with quartenary ammonium, Tebuconzole and copper were highly effective in inhibiting the mycelial growth of M. roridum. This paper confirms the first record of M. roridum causing leaf spots in sweet pepper, tomato, Spathiphyllum, Anthurium, Dieffenbachia and N. physalodes. We also report M. roridum as causal agent of cucumber fruit rot and also M. verrucaria in tango plants.

Bond Strength and Quality of the Hybrid Layer of One-step Self-etch Adhesives Applied with Agitation on Dentin

Vigorous application on the dentin surface is an excellent tool capable of improving the immediate performance of simplified self-etch adhesive systems.

The effects of E-cadherin and bcl-2 on prognosis in patients with breast cancer

BACKGROUND

Breast cancer is the most common malignancy in women. Axillary lymph node involvement and tumor size are the most significant prognostic factors in breast cancer. However, more factors are needed for evaluating the prognosis and individualizing the treatment in these patients. Intracellular adhesion molecule E-cadherin, antiapopitotic protein bcl-2, and p53 might have predictive and prognostic properties in breast cancer.

OBJECTIVE

We have investigated the effects of E-cadherin, bcl-2, and p53 on disease free survival and overall survival in patients with breast cancer.

METHODS

Positivity of aforementioned genes was detected with immunohistochemistry staining. Seventy-six women patients with invasive ductal and lobular breast cancer who had received adjuvant therapy were included in the study.

RESULTS

Bcl-2, E-cadherin, and p53 expression in tumor tissue specimens were found in 26.31%, 35.52%, and 9.21%, respectively. Mean duration of follow-up was 93.58 +/- 3.40 months. In multivariate analyses, axillary lymph node presence and C-erb-B2 overexpression were a strong negative prognostic factor of disease free survival and overall survival. E-cadherin and bcl-2 failed to have an effect on disease free survival and overall survival in our study. In addition, p53 overexpression was determined in a limited number of patients.

CONCLUSIONS

The results of this study showed that E-cadherin, bcl-2, and p53 did not have any significant prognostic value for our patients. In order to arrive at a decision, we need studies, which include more patients and long follow-up periods (Tab. 2, Fig. 2, Ref. 24).

Chlorhexidine-containing acid conditioner preserves the longevity of resin-dentin bonds

The current study evaluated the effect of 2% chlorhexidine digluconate (CHX) on the immediate and six-month resin-dentin bond strength (BS) and nanoleakage pattern (NL) of etch-and-rinse adhesives when applied in aqueous or associated to the phosphoric acid conditioner. The occlusal enamel of 42 caries-free extracted molars was removed in order to expose a flat dentin surface. In groups 1 and 2 (control-C), the surfaces were acid etched with conventional phosphoric acid, and the adhesives Prime&Bond NT (PB) and Adper Single Bond 2 (SB) were applied after rinsing, drying and rewetting with water. In groups 3 and 4 (Ac/CHX), the adhesives were applied in a similar manner, however, a 2% CHX-containing acid was previously applied. In groups 5 and 6 (CHX), the adhesives were applied according to the control group; however, the rewetting procedure was performed with an aqueous solution of 2% CHX for 60 seconds. Composite buildups (Opallis, FGM) were constructed incrementally, and the specimens were longitudinally sectioned in the "x" and "y" directions to obtain bonded sticks (0.8 mm2) to be tested in tension at 0.5 mm/minute immediately or after six months of water storage. For NL, two bonded sticks from each tooth were coated with nail varnish, placed in silver nitrate and polished down with SiC paper. Resin-dentin interfaces were analyzed by EDX-SEM. The BS and NL data from each adhesive was submitted to two-way repeated measures ANOVA and Tukey's test (alpha=0.05). After six months of water storage, significant reductions in BS were observed for both adhesives in the control group (p<0.05). When Ac/CHX or CHX was used, no significant reductions in BS were observed for both systems. Nanoleakage was more evident in the control group than in the experimental groups (p<0.05), even after six months. The use of CHX in an aqueous solution or associated with the acid conditioner was effective for reducing degradation of resin-dentin bonds after six months of water storage.

Role of fatty acids in energy provision during oocyte maturation and early embryo development

While much is known about the metabolism of exogenous nutrients such as glucose, lactate, pyruvate, amino acids by oocytes and pre-implantation mammalian embryos, the role of endogenous stores, particularly lipid, has been largely overlooked. The presence of lipid within oocytes and early embryos has been long known, and comparisons between species indicate that the amounts and types of lipid present vary considerably. Large amounts of intracellular lipid can compromise the success of cryopreservation and the removal of such lipid has been the subject of considerable effort. In this review, we present evidence that strongly suggests a metabolic role for lipid, specifically with regard to energy provision, in the late-stage oocyte and the pre-implantation embryo. We focus initially on oxygen consumption as a global indicator of metabolic activity, before reviewing different approaches that either have been designed to investigate directly, or have revealed indirectly the role of endogenous lipid in energy generation. These fall under five headings: (i) fatty acid oxidation; (ii) inhibition of triglyceride oxidation; (iii) culture in the absence of exogenous substrates; (iv) cytoplasmic organization; and (v) delipidation. On the basis of the data derived from these studies, we conclude that there is strong evidence for the utilization of endogenous lipid as an energy substrate by oocytes and early embryos.

Identification of free radicals of glycerophosphatidylcholines containing ω-6 fatty acids using spin trapping coupled with tandem mass spectrometry

Metal-catalysed radical oxidation of diacyl-glycerophosphatidylcholines (GPC) with omega-6 acyl polyunsaturated fatty acids (PAPC, palmitoyl-arachidonoyl-glycerophosphatidylcholine and PLPC, palmitoyl-lineloyl-glycerophosphatidylcholine) was studied. Free radical oxidation products were trapped by spin trapping with 5,5-dimethyl-1-pyrrolidine-N-oxide (DMPO) and identified by electrospray mass spectrometry (ES-MS). The spin adducts of oxidised GPC containing one and two oxygen atoms and one and two DMPO molecules were observed as doubly charged ions. Structural characterisation by tandem mass spectrometry (MS/MS) of these ions revealed product ions corresponding to loss of the acyl chains (sn-1-palmitoyl and sn-2-oxidised spin adduct of lineloyl or arachidonoyl), loss of the spin trap (DMPO) and product ions attributed to oxidised sn-2 fatty acid spin adduct (lineloyl and arachidonoyl). Product ions formed by homolytic cleavages near the spin trap and also from 1,4 hydrogen elimination cleavages involving the hydroxy group in the sn-2 fatty acid spin adduct allowed to infer the nature of the radical. Altogether, the presence of GPC hydroxy-alkyl/DMPO and hydroxy-alkoxyl/DMPO spin adducts was proposed.

A 36-month Clinical Evaluation of Ethanol/Water and Acetone-based Etch-and-Rinse Adhesives in Non-carious Cervical Lesions

Based on the findings of this clinical trial, one may conclude that non-carious cervical lesions should be restored with the ethanol/water-based two-step etch-and-rinse adhesive Single Bond, instead of the acetone-based One Step, as the latter presents a high number of debonded restorations after short- and long-term recalls. However, other literature findings should also be taken into account before reaching a clinical decision.

Characterisation of psoriasis susceptibility locus 6 (PSORS6) in patients with early onset psoriasis and evidence for interaction with PSORS1

BACKGROUND

Psoriasis is a genetically complex, chronic inflammatory skin disease. The authors have previously identified a susceptibility locus on chromosome 19p13 (PSORS6).

METHODS AND RESULTS

In a follow-up linkage disequilibrium (LD) study in an independent family based cohort, the authors found evidence for association to a newly discovered microsatellite at this locus (D19SPS21, p<5.3x10(-5)). An LD based association scan in 300 trios revealed association to several single, single nucleotide polymorphisms (SNPs) in one LD block. When the authors stratified this cohort for carrying the PSORS1 risk allele at the HLA-C locus, evidence for association became much stronger at single SNP and haplotype levels (p values between 1.0x10(-4) and 8.0x10(-4)). In a replication study of 1114 patients and 937 control individuals, evidence for association was also observed after stratification to the PSORS1 risk allele. In both study groups, logistic regression showed evidence for interaction between the risk alleles at PSORS1 and PSORS6. Best p values for rs12459358 in both study groups remained significant after correction for multiple testing. The associated LD block did not comprise any known genes. Interestingly, an adjacent gene, MUC16, coding for a large glycosylated protein expressed in epithelia and of unknown function, could be shown to be also expressed in tissues relevant for pathogenesis of psoriasis such as skin and thymus. Immunohistochemical analyses of skin revealed focal staining for MUC16 in suprabasal epidermal cells. Further functional studies are required to clarify its potential role in psoriasis and identify the causal variant(s) at this locus.

CONCLUSION

The data establish PSORS6 as a confirmed psoriasis susceptibility locus showing interaction with PSORS1.