Mechanoresponsive Properties of the Periodontal Ligament

The periodontal ligament (PDL) functions as an enthesis, a connective tissue attachment that dissipates strains created by mechanical loading. Entheses are mechanoresponsive structures that rapidly adapt to changes in their mechanical loading; here we asked which features of the PDL are sensitive to such in vivo loading. We evaluated the PDL in 4 physiologically relevant mechanical environments, focusing on mitotic activity, cell density, collagen content, osteogenic protein expression, and organization of the tissue. In addition to examining PDLs that supported teeth under masticatory loading and eruptive forces, 2 additional mechanical conditions were created and analyzed: hypoloading and experimental tooth movement. Collectively, these data revealed that the adult PDL is a remarkably quiescent tissue and that only when it is subjected to increased loads—such as those associated with mastication, eruption, and orthodontic tooth movement—does the tissue increase its rate of cell proliferation and collagen production. These data have relevance in clinical scenarios where PDL acclimatization can be exploited to optimize tooth movement.

A survey of outcomes and management of patients post fragility fractures in China

We found that the fragility hip and vertebral fractures caused excess mortality rates in this Chinese female population, which was unexpectedly lower than those in western countries and other Asian countries. This was the first nationwide survey relating to post-fracture outcomes conducted among Chinese population in Mainland China.

INTRODUCTION

This study aimed to investigate the mortality, self-care ability, diagnosis, and medication treatment of osteoporosis following fragility hip and vertebral fractures through a nationwide survey among female patients aged over 50 in Mainland China.

METHODS

This was a multicenter, retrospective cohort study based on medical chart review and patient questionnaire. Female patients aged 50 or older admitted for low-trauma hip or vertebral fractures and discharged from Jan 1, 2008 to Dec 31, 2012 were followed.

RESULTS

Total of 1151 subjects of hip fracture and 842 subjects of vertebral fracture were included. The mean age was 73.4 ± 10.0, and the median of duration from index fracture to interview was 2.6 years. The overall 1-year, 2-year, 3-year, 4-year, and 5-year cumulative mortality rates were 3.5, 7.0, 11.2, 13.1, and 16.9 %, respectively. The first year mortality rates in hip (3.8 %, 95% CI 3.3-4.4 %) and vertebral fracture (3.1 %, 95% CI 2.5-3.7 %) were significantly higher than that in the general population (1.6 %). Impaired self-care ability was observed in 33.2, 40.6, and 23.8 % of overall, hip fracture, and vertebral fracture group, respectively. The overall diagnosis rate of osteoporosis was 56.8 %, and bone mineral density (BMD) measurement had never been conducted in 42.0 % among these women. After the index fracture, 69.6 % of them received supplements and/or anti-osteoporotic medications, among which 39.6 % only received calcium with/without vitamin D supplementation.

CONCLUSIONS

The osteoporotic hip and vertebral fractures caused excess mortality rates in this population of Mainland China. The current diagnosis and medical treatment following the fragility fractures is still insufficient in Mainland China.

Towards next generation adenosine A(2A) receptor antagonists

The Adenosine A2A receptor is a member of the G-protein coupled receptor superfamily. It plays a key role in numerous physiological processes through the central nervous system and in peripheral tissues. Functional interactions between the A2A and dopamine D2 receptor has spurred interest in the use of antagonists as anti-Parkinson drugs. Additionally, oncology drugs are now being designed based on the potential for A2A antagonists to function as immunotherapeutics. From early studies based on classical xanthine type A2A antagonists through second generation agents, this mini review will cover aspects of the discovery, development, chemical synthesis and medicinal evaluation of this important class of drugs.

Search for patterns by combining cosmic-ray energy and arrival directions at the Pierre Auger Observatory

Energy-dependent patterns in the arrival directions of cosmic rays are searched for using data of the Pierre Auger Observatory. We investigate local regions around the highest-energy cosmic rays with [Formula: see text] eV by analyzing cosmic rays with energies above [Formula: see text] eV arriving within an angular separation of approximately 15[Formula: see text]. We characterize the energy distributions inside these regions by two independent methods, one searching for angular dependence of energy-energy correlations and one searching for collimation of energy along the local system of principal axes of the energy distribution. No significant patterns are found with this analysis. The comparison of these measurements with astrophysical scenarios can therefore be used to obtain constraints on related model parameters such as strength of cosmic-ray deflection and density of point sources.

Isomer-specific comparisons of the hydrolysis of synthetic pyrethroids and their fluorogenic analogues by esterases from the cotton bollworm Helicoverpa armigera

The low aqueous solubility and chiral complexity of synthetic pyrethroids, together with large differences between isomers in their insecticidal potency, have hindered the development of meaningful assays of their metabolism and metabolic resistance to them. To overcome these problems, Shan and Hammock (2001) [7] therefore developed fluorogenic and more water-soluble analogues of all the individual isomers of the commonly used Type 2 pyrethroids, cypermethrin and fenvalerate. The analogues have now been used in several studies of esterase-based metabolism and metabolic resistance. Here we test the validity of these analogues by quantitatively comparing their hydrolysis by a battery of 22 heterologously expressed insect esterases with the hydrolysis of the corresponding pyrethroid isomers by these esterases in an HPLC assay recently developed by Teese et al. (2013) [14]. We find a strong, albeit not complete, correlation (r = 0.7) between rates for the two sets of substrates. The three most potent isomers tested were all relatively slowly degraded in both sets of data but three esterases previously associated with pyrethroid resistance in Helicoverpa armigera did not show higher activities for these isomers than did allelic enzymes derived from susceptible H. armigera. Given their amenability to continuous assays at low substrate concentrations in microplate format, and ready detection of product, we endorse the ongoing utility of the analogues in many metabolic studies of pyrethroids.

Cellular response of chondrocytes to magnesium alloys for orthopedic applications

In the present study, the effects of Mg-Nd-Zn-Zr (JDBM), brushite (CaHPO₄·₂H₂O)-coated JDBM (C-JDBM), AZ31, WE43, pure magnesium (Mg) and Ti alloy (TC4) on rabbit chondrocytes were investigated in vitro. Adhesion experiments revealed the satisfactory morphology of chondrocytes on the surface of all samples. An indirect cytotoxicity test using MTT assay revealed that C-JDBM and TC4 exhibited results similar to those of the negative control, better than those obtained with JDBM, AZ31, WE43 and pure Mg (p<0.05). There were no statistically significant differences observed between the JDBM, AZ31, WE43 and pure Mg group (p>0.05). The results of indirect cell cytotoxicity and proliferation assays, as well as those of apoptosis assay, glycosaminoglycan (GAG) quantification, assessment of collagen II (Col II) levels and RT-qPCR revealed a similar a trend as was observed with MTT assay. These findings suggested that the JDBM alloy was highly biocompatible with chondrocytes in vitro, yielding results similar to those of AZ31, WE43 and pure Mg. Furthermore, CaHPO₄·₂H₂O coating significantly improved the biocompatibility of this alloy.

Enhanced antibacterial properties, biocompatibility, and corrosion resistance of degradable Mg-Nd-Zn-Zr alloy

Magnesium (Mg), a potential biodegradable material, has recently received increasing attention due to its unique antibacterial property. However, rapid corrosion in the physiological environment and potential toxicity limit clinical applications. In order to improve the corrosion resistance meanwhile not compromise the antibacterial activity, a novel Mg alloy, Mg-Nd-Zn-Zr (Hereafter, denoted as JDBM), is fabricated by alloying with neodymium (Nd), zinc (Zn), zirconium (Zr). pH value, Mg ion concentration, corrosion rate and electrochemical test show that the corrosion resistance of JDBM is enhanced. A systematic investigation of the in vitro and in vivo antibacterial capability of JDBM is performed. The results of microbiological counting, CLSM, SEM in vitro, and microbiological cultures, histopathology in vivo consistently show JDBM enhanced the antibacterial activity. In addition, the significantly improved cytocompatibility is observed from JDBM. The results suggest that JDBM effectively enhances the corrosion resistance, biocompatibility and antimicrobial properties of Mg by alloying with the proper amount of Zn, Zr and Nd.

Enhanced bioactivity of Mg-Nd-Zn-Zr alloy achieved with nanoscale MgF2 surface for vascular stent application

Magnesium (Mg) alloys have revolutionized the application of temporary load-bearing implants as they meet both engineering and medical requirements. However, rapid degradation of Mg alloys under physiological conditions remains the major obstacle hindering the wider use of Mg-based implants. Here we developed a simple method of preparing a nanoscale MgF2 film on Mg-Nd-Zn-Zr (denoted as JDBM) alloy, aiming to reduce the corrosion rate as well as improve the biological response. The corrosion rate of JDBM alloy exposed to artificial plasma is reduced by ∼20% from 0.337 ± 0.021 to 0.269 ± 0.043 mm·y(-1) due to the protective effect of the MgF2 film with a uniform and dense physical structure. The in vitro cytocompatibility test of MgF2-coated JDBM using human umbilical vein endothelial cells indicates enhanced viability, growth, and proliferation as compared to the naked substrate, and the MgF2 film with a nanoscale flakelike feature of ∼200-300 nm presents a much more favorable environment for endothelial cell adhesion, proliferation, and alignment. Furthermore, the animal experiment via implantation of MgF2-coated JDBM stent to rabbit abdominal aorta confirms excellent tissue compatibility of the well re-endothelialized stent with no sign of thrombogenesis and restenosis in the stented vessel.

Nontraditional risk factors for cardiovascular disease and visceral adiposity index among different body size phenotypes

BACKGROUND AND AIMS

Increased cardiovascular disease and mortality risk in metabolically healthy obese (MHO) individuals remain highly controversial. Several studies suggested risk while others do not. The traditional cardiovascular risk factors may be insufficient to demonstrate the complete range of metabolic abnormalities in MHO individuals. Hence, we aimed to compare the prevalence of elevated lipoprotein (a), apolipoprotein B, and uric acid (UA) levels, apolipoprotein B/apolipoprotein A1 ratio, and visceral adiposity index (VAI) scores, and low apolipoprotein A1 levels among 6 body size phenotypes (normal weight with and without metabolic abnormalities, overweight with and without metabolic abnormalities, and obese with or without metabolic abnormalities).

METHODS AND RESULTS

We conducted a cross-sectional analysis of 7765 Chinese adults using data from the nationwide China Health and Nutrition Survey 2009. MHO persons had intermediate prevalence of elevated apolipoprotein B and UA levels, apolipoprotein B/apolipoprotein A1 ratio and VAI scores, and low apolipoprotein A1 levels between metabolically healthy normal-weight (MHNW) and metabolically abnormal obese individuals (P < 0.001 for all comparisons). Elevated apolipoprotein B and UA concentrations, apolipoprotein B/apolipoprotein A1 ratio, and VAI scores were all strongly associated with the MHO phenotype (all P < 0.01).

CONCLUSIONS

Prevalence of elevated apolipoprotein B and UA levels, apolipoprotein B/apolipoprotein A1 ratio and VAI scores, and low levels of apolipoprotein A1 was higher among MHO persons than among MHNW individuals. The elevated levels of the nontraditional risk factors and VAI scores in MHO persons could contribute to the increased cardiovascular disease risk observed in long-term studies.

Enhancement of osteogenesis and biodegradation control by brushite coating on Mg-Nd-Zn-Zr alloy for mandibular bone repair

To diminish incongruity between bone regeneration and biodegradation of implant magnesium alloy applied for mandibular bone repair, a brushite coating was deposited on a matrix of a Mg-Nd-Zn-Zr (hereafter, denoted as JDBM) alloy to control the degradation rate of the implant and enhance osteogenesis of the mandible bone. Both in vitro and in vivo evaluations were carried out in the present work. Viability and adhesion assays of rabbit bone marrow mesenchyal stem cells (rBM-MSCs) were applied to determine the biocompatibility of a brushite-coated JDBM alloy. Osteogenic gene expression was characterized by quantitative real-time polymerase chain reaction (RT-PCR). Brushite-coated JDBM screws were implanted into mandible bones of rabbits for 1, 4, and 7 months, respectively, using 316L stainless steel screws as a control group. In vivo biodegradation rate was determined by synchrotron radiation X-ray microtomography, and osteogenesis was observed and evaluated using Van Gieson's picric acid-fuchsin. Both the naked JDBM and brushite-coated JDBM samples revealed adequate biosafety and biocompatibility as bone repair substitutes. In vitro results showed that brushite-coated JDBM considerably induced osteogenic differentiation of rBM-MSCs. And in vivo experiments indicated that brushite-coated JDBM screws presented advantages in osteoconductivity and osteogenesis of mandible bone of rabbits. Degradation rate was suppressed at a lower level at the initial stage of implantation when new bone tissue formed. Brushite, which can enhance oeteogenesis and partly control the degradation rate of an implant, is an appropriate coating for JDBM alloys used for mandibular repair. The Mg-Nd-Zn-Zr alloy with brushite coating possesses great potential for clinical applications for mandibular repair.

High efficiency chlorine removal from polyvinyl chloride (PVC) pyrolysis with a gas-liquid fluidized bed reactor

In this research a gas-liquid fluidized bed reactor was developed for removing chlorine (Cl) from polyvinyl chloride (PVC) to favor its pyrolysis treatment. In order to efficiently remove Cl within a limited time before extensive generation of hydrocarbon products, the gas-liquid fluidized bed reactor was running at 280-320 °C, where hot N2 was used as fluidizing gas to fluidize the molten polymer, letting the molten polymer contact well with N2 to release Cl in form of HCl. Experimental results showed that dechlorination efficiency is mainly temperature dependent and 300 °C is a proper reaction temperature for efficient dechlorination within a limited time duration and for prevention of extensive pyrolysis; under this temperature 99.5% of Cl removal efficiency can be obtained within reaction time around 1 min after melting is completed as the flow rate of N2 gas was set around 0.47-0.85 Nm(3) kg(-1) for the molten PVC. Larger N2 flow rate and additives in PVC would enhance HCl release but did not change the final dechlorination efficiency; and excessive N2 flow rate should be avoided for prevention of polymer entrainment. HCl is emitted from PVC granules or scraps at the mean time they started to melt and the melting stage should be taken into consideration when design the gas-liquid fluidized bed reactor for dechlorination.

Synergistic sporicidal effect of ethanol on a combination of orthophthalaldehyde and didecyldimethylammonium chloride

The objective of this study was to evaluate the potential synergistic effect of ethanol on a combination of orthophthalaldehyde (OPA) and didecyldimethylammonium chloride (DDAC) against the spores of Bacillus subtilis var. Niger. The quantitative carrier test for sporicidal testing of high-level disinfectants according to the guideline of China (Technical Standard for Disinfection 2002) was used as method. Considerable synergistic effect was observed after a 30-min treatment at 20°C. There was an augment in mean log reduction as the concentration of DDAC was increased ranging from 0·2 to 3 g l(-1) in combination with 6 g l(-1) OPA. Ten and 20% ethanol in combination with 6 g l(-1) OPA and 2 g l(-1) DDAC caused more than a 3-log reduction while either 6 g l(-1) OPA, 2 g l(-1) DDAC and 20% ethanol alone or a combination of two of the three agents produced less than a 1-log reduction. Further, 40-min exposure time of combination of OPA, DDAC and 20% ethanol led to greater than a 5-log reduction in spores, and no spore growth was observed following 60- and 90-min exposures.

SIGNIFICANCE AND IMPACT OF THE STUDY

Orthophthalaldehyde (OPA) is very effective at concentrations far lower than its recommended in-use concentration of 0·5% (w/v) and is equally effective against both the gram-negative and gram-positive bacteria. However, it shows lower activity against spores. The synergistic sporicidal effect exhibited by ethanol on a combination of OPA and DDAC can be considered to enhance sporicidal activity for using in situations of sterilization, to reduce in-use concentration of OPA used alone, which may minimize its side effect. OPA may be a more satisfactory and the first-choice agent to replace glutaraldehyde (GTA) as a high-level disinfectant for medical devices.

[Finite element analysis for compression and expansion behavior of magnesium stent]

Magnesium stents have gained increasing interest as an ideal stent of future intervention. In order to study the deformation behavior of magnesium alloy stents in the interventional treatment, the finite element method was used to analysis the effects of different crimp and expansion dimensions on the mechanical properties (maximum stress, radial recoil rate, longitudinal shortening rate and radial strength). The results showed that crimping and expanding have a minimal influence on the stent radial strength. When the expansion size is same, the maximum equivalent stress and recoil rate decrease with the crimp size. When the crimp size is same, in contrast with the radial recoil rate, the maximum equivalent stress and longitudinal shortening rate increase with the expansion size. In addition the paper verified the radial strength-radial displacement curve obtained by FEM. Results are basically consistent, indicating the finite element method can efficiently provide researchers with reliable, high-quality design.

Influence of fluoride treatment on surface properties, biodegradation and cytocompatibility of Mg-Nd-Zn-Zr alloy

Fluoride treatment is a commonly used technique or pre-treatment to optimize the degradation kinetic and improve the biocompatibility of magnesium-based implant. The influence of changed surface properties and degradation kinetics on subsequent protein adsorption and cytocompatibility is critical to understand the biocompatibility of the implant. In this study, a patent magnesium alloy Mg-Nd-Zn-Zr alloy (JDBM) designed for cardiovascular stent application was treated by immersion in hydrofluoric acid. A 1.5 μm thick MgF2 layer was prepared. The surface roughness was increased slightly while the surface zeta potential was changed to a much more negative value after the treatment. Static contact angle test was performed, showing an increase in hydrophilicity and surface energy after the treatment. The MgF2 layer slowed down in vitro degradation rate, but lost the protection effect after 10 days. The treatment enhanced human albumin adsorption while no difference of human fibrinogen adsorption amount was observed. Direct cell adhesion test showed many more live HUVECs retained than bare magnesium alloy. Both treated and untreated JDBM showed no adverse effect on HUVEC viability and spreading morphology. The relationship between changed surface characteristics, degradation rate and protein adsorption, cytocompatibility was also discussed.

A simple and sensitive gas chromatography method for determination of isosorbide dinitrate and its metabolites in human plasma: application to pharmacokinetics study on oral spray

A sensitive method for the simultaneous determination of isosorbide dinitrate (ISDN) and its mononitrate metabolites, isosorbide 2-mononitrate and isosorbide 5-mononitrate (IS-2-MN and IS-5-MN), in human plasma was developed using capillary gas chromatography with electron-capture detection, whereas 1,2,4-butanetriol trinitrate was used as internal standard. The analytes were extracted with a simple liquid-liquid extraction from plasma and separated on a DB-1 column. The results of method validation demonstrated that the calibration curves were linear in range of 2-60 ng/mL for ISDN and IS-5-MN, 1-20 ng/mL for IS-2-MN, respectively. The precision (RSD%) was less than 15%, and the lower limit of quantitation was identifiable and reproducible at 2 ng/mL for ISDN and IS-5-MN, 1 ng/mL for IS-2-MN. The analytes in plasma were stable after being stored for more than 30 days and after 2 freeze-thaw cycles (-20 to 25°C). And then this method was successfully applied to a pharmacokinetic investigation on isosorbide dinitrate oral spray in healthy volunteers.

Nanophasic biodegradation enhances the durability and biocompatibility of magnesium alloys for the next-generation vascular stents

Biodegradable metal alloys emerge as a new class of biomaterials for tissue engineering and medical devices such as cardiovascular stents. Deploying biodegradable materials to fabricate stents not only obviates a second surgical intervention for implant removal but also circumvents the long-term foreign body effect of permanent implants. However, these materials for stents suffer from an un-controlled degradation rate, acute toxic responses, and rapid structural failure presumably due to a non-uniform, fast corrosion process. Here we report that highly uniform, nanophasic degradation is achieved in a new Mg alloy with unique interstitial alloying composition as the nominal formula Mg-2.5Nd-0.2Zn-0.4Zr (wt%, hereafter, denoted as JDBM). This material exhibits highly homogeneous nanophasic biodegradation patterns as compared to other biodegradable metal alloy materials. Consequently it has significantly reduced degradation rate determined by electrochemical characterization. The in vitro cytotoxicity test using human vascular endothelial cells indicates excellent biocompatibility and potentially minimal toxic effect on arterial vessel walls. Finally, we fabricated a cardiovascular stent using JDBM and performed in vivo long-term assessment via implantation of this stent in an animal model. The results confirmed the reduced degradation rate in vivo, excellent tissue compatibility and long-term structural and mechanical durability. Thus, this new Mg-alloy with highly uniform nanophasic biodegradation represents a major breakthrough in the field and a promising material for manufacturing the next generation biodegradable vascular stents.

Pharmacokinetic and bioequivalence studies of ibuprofen suspension after a single-dose administration in healthy Chinese volunteers

OBJECTIVE

The aim of this study was to assessed the pharmacokinetic and bioequivalence of 2 formulations of ibuprofen suspension.

METHOD

20 healthy volunteers were enrolled into this random, single-dose, 2-way crossover, open-label, single-centre, pharmacokinetic study. After overnight fasting, 2 formulations (test and reference) of ibuprofen (400 mg ibuprofen/20 mL suspension) were administered as a single dose on 2 treatment days separated by a 7-day washout period. After dosing, blood samples were drawn for a period of 12 h. The plasma samples were analyzed for the presence of ibuprofen by HPLC with ultraviolet detection. Pharmacokinetic parameters were determined from plasma concentrations for both formulations.

RESULTS

The main pharmacokinetics parameters of test and reference were as follows: t1/2 was (1.94±0.38) h and (1.95±0.28) h; Cmax was (33.41±7.83) μg · mL- 1 and (31.08±9.30) μg · mL- 1; AUC0-12 was (91.44±19.26) μg · mL-1 · h and (84.75±24.45) μg · mL-1 · h; AUC0-∞ was (92.82±19.94) μg · mL-1 · h and (85.97±24.99) μg · mL-1 · h; median Tmax was 0.5 h (range, 0.25, 2) and 0.5 h (range, 0.25, 1.5). The 90% confidence intervals of the test/reference treatment ratios for Cmax, AUC0-12 and AUC0-∞ were observed to be within the predetermined acceptable interval of 80-125%.

CONCLUSION

This single-dose study in healthy Chinese fasted volunteers was shown that the ibuprofen test and reference met the requirement of the State Food and Drug Administration, and the test and reference were bioequivalent.