Construction of a series of episomal plasmids and their application in the development of an efficient CRISPR/Cas9 system in Pichia pastoris

The methylotrophic yeast Pichia pastoris is widely used in recombinant expression of eukaryotic proteins owing to the ability of post-translational modification, tightly regulated promoters, and high cell density fermentation. However, episomal plasmids for heterologous gene expression and the CRISPR/Cas9 system for genome editing have not been well developed in P. pastoris. In the present study, a panel of episomal plasmids containing various autonomously replicating sequences (ARSs) were constructed and their performance in transformation efficiency, copy numbers, and propagation stability were systematically compared. Among the five ARSs with different origins, panARS isolated from Kluyveromyces lactis was determined to have the best performance and used to develop an efficient CRISPR/Cas9 based genome editing system. Compared with a previously reported system using the endogenous and most commonly used ARS (PARS1), the CRISPR/Cas9 genome editing efficiency was increased for more than tenfold. Owing to the higher plasmid stability with panARS, efficient CRISPR/Cas9-mediated genome editing with a type III promoter (i.e. SER promoter) to drive the expression of the single guide RNA (sgRNA) was achieved for the first time. The constructed episomal plasmids and developed CRISPR/Cas9 system will be important synthetic biology tools for both fundamental studies and industrial applications of P. pastoris.

Highly Efficient Single-Pot Scarless Golden Gate Assembly

Golden Gate assembly is one of the most widely used DNA assembly methods due to its robustness and modularity. However, despite its popularity, the need for BsaI-free parts, the introduction of scars between junctions, as well as the lack of a comprehensive study on the linkers hinders its more widespread use. Here, we first developed a novel sequencing scheme to test the efficiency and specificity of 96 linkers of 4-bp length and experimentally verified these linkers and their effects on Golden Gate assembly efficiency and specificity. We then used this sequencing data to generate 200 distinct linker sets that can be used by the community to perform efficient Golden Gate assemblies of different sizes and complexity. We also present a single-pot scarless Golden Gate assembly and BsaI removal scheme and its accompanying assembly design software to perform point mutations and Golden Gate assembly. This assembly scheme enables scarless assembly without compromising efficiency by choosing optimized linkers near assembly junctions.

An Adiponectin Receptor Agonist Reduces Type 2 Diabetic Periodontitis

Periodontitis is twice as prevalent in diabetics as in nondiabetics, and type 2 diabetes (T2D)-associated periodontitis is severe in many cases due to the altered and aberrant functions of bone cells in hyperglycemic conditions. Therefore, developing an effective method to halt the disease process, as well as restore and regenerate lost alveolar bone to reserve the natural teeth in diabetics, is critically important. In the current study, we applied a newly discovered adiponectin receptor agonist AdipoRon (APR) in experimental periodontitis in diabetic animal models and demonstrated the underlying molecular mechanisms. We found that when APR systemically quenched the blood sugar level in diet-induced obesity (DIO) diabetic mice, it reduced osteoclast numbers and alveolar bone loss significantly due to APR's inhibition on osteoclast differentiation shown in our in vitro studies. APR also decreased the production of proinflammatory molecules CC chemokine ligand 2 and interleukin 6 in diseased gingival tissues. On the other hand, APR promoted alveolar bone regeneration through enhancing osteogenic differentiation and decreasing stromal cell-derived factor 1 in the bone marrow that facilitates stem cell migration. Same results were achieved by APR treatment of periodontitis induced in adiponectin (APN) knockout mice, indicating the ability of APR to activate the endogenous APN receptors to exert osteoanabolic effects. In summary, our study supports the notion that APR could be used as an effective multipronged approach to target T2D-associated periodontitis.

Metabolic pathway engineering for high-level production of 5-hydroxytryptophan in Escherichia coli

Cellular metabolic networks should be carefully balanced using metabolic engineering to produce the desired products at the industrial scale. As the precursor for the biosynthesis of the neurotransmitter serotonin, 5-hydroxytryptophan (5-HTP) is effective in treating a variety of diseases, such as depression, fibromyalgia, obesity, and cerebellar ataxia. Due to the lack of an efficient synthetic method, commercial production of 5-HTP is only achieved by extracting from the seeds of Griffonia Smplicifolia. This study reports efficient microbial production of 5-HTP via metabolically engineered Escherichia coli. Firstly, human tryptophan hydroxylase I (TPH1) gene was functionally expressed. For endogenous supply of the cofactor tetrahydrobiopterin (BH4), human BH4 biosynthesis and regeneration pathway was reconstituted. Whole-cell bioconversion resulted in high-level production of 5-HTP (~1.2 g/L) from 2 g/L L-tryptophan in shake flasks. Further metabolic engineering efforts were employed to achieve 5-HTP biosynthesis from simple carbon sources. The whole biosynthetic pathway was divided into three functional modules, L-tryptophan module, the hydroxylation module, and the BH4 module. By reducing the copy number of L-tryptophan module, replacing TPH1 with a more stable mutant form, and promoter regulation of the BH4 module, 5-HTP was produced at a final titer of 1.3 g/L in the shake flask and 5.1 g/L in a fed-batch fermenter with glycerol as the carbon source, both of which were the highest ever reported for microbial production of 5-HTP.

Metabolic Engineering of Saccharomyces cerevisiae Using a Trifunctional CRISPR/Cas System for Simultaneous Gene Activation, Interference, and Deletion

Design and construction of an optimal microbial cell factory typically requires overexpression, knockdown, and knockout of multiple gene targets. In this chapter, we describe a combinatorial metabolic engineering strategy utilizing an orthogonal trifunctional CRISPR system that combines transcriptional activation, transcriptional interference, and gene deletion (CRISPR-AID) in the yeast Saccharomyces cerevisiae. This strategy enables multiplexed perturbation of the metabolic and regulatory networks in a modular, parallel, and high-throughput manner. To implement this system, three orthogonal Cas proteins were utilized: dLbCpf1 fused to a transcriptional activator, dSpCas9 fused to a transcriptional repressor, and SaCas9 for gene deletion. Deletion was accomplished by the introduction of a 28bp frame-shift mutation using a homology donor on the guide RNA expression vector. This approach enables the application of metabolic engineering to systematically optimize phenotypes of interest through a combination of gain-, reduction-, and loss-of-function mutations. Finally, we describe the construction of the CRISPR-AID system and its application toward engineering an example phenotype, surface display of recombinant Trichoderma reesei endoglucanase II.

Advancing Metabolic Engineering of Saccharomyces cerevisiae Using the CRISPR/Cas System

Thanks to its ease of use, modularity, and scalability, the clustered regularly interspaced short palindromic repeats (CRISPR) system has been increasingly used in the design and engineering of Saccharomyces cerevisiae, one of the most popular hosts for industrial biotechnology. This review summarizes the recent development of this disruptive technology for metabolic engineering applications, including CRISPR-mediated gene knock-out and knock-in as well as transcriptional activation and interference. More importantly, multi-functional CRISPR systems that combine both gain- and loss-of-function modulations for combinatorial metabolic engineering are highlighted.

Cell-free protein synthesis enabled rapid prototyping for metabolic engineering and synthetic biology

Advances in metabolic engineering and synthetic biology have facilitated the manufacturing of many valuable-added compounds and commodity chemicals using microbial cell factories in the past decade. However, due to complexity of cellular metabolism, the optimization of metabolic pathways for maximal production represents a grand challenge and an unavoidable barrier for metabolic engineering. Recently, cell-free protein synthesis system (CFPS) has been emerging as an enabling alternative to address challenges in biomanufacturing. This review summarizes the recent progresses of CFPS in rapid prototyping of biosynthetic pathways and genetic circuits (biosensors) to speed up design-build-test (DBT) cycles of metabolic engineering and synthetic biology.

IL6 derived from cancer-associated fibroblasts promotes chemoresistance via CXCR7 in esophageal squamous cell carcinoma

Various factors and cellular components in the tumor microenvironment are key drivers associated with drug resistance in many cancers. Here, we analyzed the factors and molecular mechanisms involved in chemoresistance in patients with esophageal squamous cell carcinoma (ESCC). We found that interleukin 6 (IL6) derived mainly from cancer-associated fibroblasts played the most important role in chemoresistance by upregulating C-X-C motif chemokine receptor 7 (CXCR7) expression through signal transducer and activator of transcription 3/nuclear factor-κB pathway. CXCR7 knockdown resulted in the inhibition of IL6-induced proliferation and chemoresistance. In addition, CXCR7 silencing significantly decreased gene expression associated with stemness, chemoresistance and epithelial-mesenchymal transition and suppressed the proliferation ability of ESCC cells in three-dimensional culture systems and angiogenesis assay. In clinical samples, ESCC patients with high expression of CXCR7 and IL6 presented a significantly worse overall survival and progression-free survival upon receiving cisplatin after operation. These results suggest that the IL6-CXCR7 axis may provide a promising target for the treatment of ESCC.

Cortical Potential Imaging of Brain Electrical Activity by Means of Parametric Projection Filter

Objectives: The objective of this study was to explore suitable spatial filters for inverse estimation of cortical potentials from the scalp electroencephalogram. The effect of incorporating noise covariance into inverse procedures was examined by computer simulations and tested in human experiment.

Methods: The parametric projection filter, which allows inverse estimation with the presence of information on the noise, was applied to an inhomogeneous three-concentric-sphere model under various noise conditions in order to estimate the cortical potentials from the scalp potentials. The method for determining the optimum regularization parameter, which can be applied for parametric inverse techniques, is also discussed.

Results: Human visual evoked potential experiment was carried out to examine the performance of the proposed restoration method. The parametric projection filter gave more localized inverse solution of cortical potential distribution than the truncated SVD and Tikhonov regularization.

Conclusion: The present simulation results suggest that incorporation of information on the noise covariance allows better estimation of cortical potentials, than inverse solutions without knowledge about the noise covariance, when the correlation between the signal and noise is low.

Mechanism of iodine release from iodoapatite in aqueous solution

Incongruent release of iodine from iodoapatite (Pb₅(VO₄)₃I) for immobilization of¹²⁹iodine, controlled by exchange of iodide and hydroxide in solution.

Combinatorial metabolic engineering using an orthogonal tri-functional CRISPR system

Designing an optimal microbial cell factory often requires overexpression, knock-down, and knock-out of multiple gene targets. Unfortunately, such rewiring of cellular metabolism is often carried out sequentially and with low throughput. Here, we report a combinatorial metabolic engineering strategy based on an orthogonal tri-functional CRISPR system that combines transcriptional activation, transcriptional interference, and gene deletion (CRISPR-AID) in the yeast Saccharomyces cerevisiae. This strategy enables perturbation of the metabolic and regulatory networks in a modular, parallel, and high-throughput manner. We demonstrate the application of CRISPR-AID not only to increase the production of β-carotene by 3-fold in a single step, but also to achieve 2.5-fold improvement in the display of an endoglucanase on the yeast surface by optimizing multiple metabolic engineering targets in a combinatorial manner.

Metaboli engineering through gene overexpression, knock-down and knock-out is often carried out sequentially in a high labor, low-throughput manner. Here, the authors use CRISPR-mediated gene activation, interference and deletion to rapidly rewire S. cerevisiae metabolism in a single step.

Are we making good use of our public resources? The false-positive rate of screening by fundus photography for diabetic macular oedema

INTRODUCTION

A large proportion of patients diagnosed with diabetic maculopathy using fundus photography and hence referred to specialist clinics following the current screening guidelines adopted in Hong Kong and United Kingdom are found to be false-positive, implying that they did not have macular oedema. This study aimed to evaluate the false-positive rate of diabetic maculopathy screening using the objective optical coherence tomography scan.

METHODS

This was a cross-sectional observational study. Consecutive diabetic patients from the Hong Kong West Cluster Diabetic Retinopathy Screening Programme with fundus photographs graded R1M1 were recruited between October 2011 and June 2013. Spectral-domain optical coherence tomography imaging was performed. Central macular thickness of ≥300 μm and/or the presence of optical coherence tomography signs of diabetic macular oedema were used to define the presence of diabetic macular oedema. Patients with conditions other than diabetes that might affect macular thickness were excluded. The mean central macular thickness in various subgroups of R1M1 patients was calculated and the proportion of subjects with central macular thickness of ≥300 μm was used to assess the false-positive rate of this screening strategy.

RESULTS

A total of 491 patients were recruited during the study period. Of the 352 who were eligible for analysis, 44.0%, 17.0%, and 38.9% were graded as M1 due to the presence of foveal 'haemorrhages', 'exudates', or 'haemorrhages and exudates', respectively. The mean (±standard deviation) central macular thickness was 265.1±55.4 μm. Only 13.4% (95% confidence interval, 9.8%-17.0%) of eyes had a central macular thickness of ≥300 μm, and 42.9% (95% confidence interval, 37.7%-48.1%) of eyes had at least one optical coherence tomography sign of diabetic macular oedema. For patients with retinal haemorrhages only, 9.0% (95% confidence interval, 4.5%-13.5%) had a central macular thickness of ≥300 μm; 23.2% (95% confidence interval, 16.6%-29.9%) had at least one optical coherence tomography sign of diabetic macular oedema. The false-positive rate of the current screening strategy for diabetic macular oedema was 86.6%.

CONCLUSION

The high false-positive rate of the current diabetic macular oedema screening adopted by the United Kingdom and Hong Kong may lead to unnecessary psychological stress for patients and place a financial burden on the health care system. A better way of screening is urgently needed. Performing additional spectral-domain optical coherence tomography scans on selected patients fulfils this need.

Functional Reconstitution of a Pyruvate Dehydrogenase in the Cytosol of Saccharomyces cerevisiae through Lipoylation Machinery Engineering

Acetyl-CoA is a key precursor for the biosynthesis of a wide range of fuels, chemicals, and value-added compounds, whose biosynthesis in Saccharomyces cerevisiae involves acetyl-CoA synthetase (ACS) and is energy intensive. Previous studies have demonstrated that functional expression of a pyruvate dehydrogenase (PDH) could fully replace the endogenous ACS-dependent pathway for cytosolic acetyl-CoA biosynthesis in an ATP-independent manner. However, the requirement for lipoic acid (LA) supplementation hinders its wide industrial applications. In the present study, we focus on the engineering of a de novo synthetic lipoylation machinery for reconstitution of a functional PDH in the cytosol of yeast. First, a LA auxotrophic yeast strain was constructed through the expression of the Escherichia coli PDH structural genes and a lipoate-protein ligase gene in an ACS deficient (acs1Δ acs2Δ) strain, based on which an in vivo acetyl-CoA reporter was developed for following studies. Then the de novo lipoylation pathway was reconstituted in the cytosol of yeast by coexpressing the yeast mitochondrial lipoylation machinery genes and the E. coli type II fatty acid synthase (FAS) genes. Alternatively, an unnatural de novo synthetic lipoylation pathway was constructed by combining the reversed β-oxidation pathway with an acyl-ACP synthetase gene. To the best of our knowledge, reconstitution of natural and unnatural de novo synthetic lipoylation pathways for functional expression of a PDH in the cytosol of yeast has never been reported. Our study has laid a solid foundation for the construction and further optimization of acetyl-CoA overproducing yeast strains.

Optimization of polarizer azimuth in improving signal-to-noise ratio in Kerr microscopy

The magneto optical Kerr effect (MOKE) is a widely used technique in magnetic domain imaging for its high surface sensitivity and external magnetic compatibility. Optimization of Kerr microscopy will improve the detecting sensitivity and provide high-quality domain images. In this work, we provide a method to optimize the polarizer azimuth in improving the signal-to-noise ratio (S/N) in longitudinal Kerr microscopy with the generalized magneto optical ellipsometry. Detailed analysis of the MOKE signal and the noise components are provided to study the optimum polarizer and analyzer azimuth combinations. Results show that, for a fixed polarizer angle 1°, the laser intensity noise and the shot noise, which vary with the input laser power, have a similar amplitude and decline with the analyzer azimuth increasing. When the analyzer is set at the extinction place, the Johnson noise plays a dominate role in the total noise. Then, the S/N values are calculated to find the optimum polarizer and analyzer azimuth. Results show that the optimum polarizer and analyzer azimuth combination for Permalloy is (18.35°, 68.35°) under an incident angle of 45°. After that, the S/N of 200 nm Permalloy at different analyzer angles with the polarizer azimuth set at 18.35° is measured to verify the validity of the simulation results. At last, the S/N at different incident angles is calculated. Results show that the optimum incident angle of 200 nm Permalloy film to improve the S/N is 70.35° under the polarizer and analyzer angles set at the optimal combinations (18.35°, 68.35°).