Preclinical and Translational Studies in Small Ruminants (Sheep and Goat) as Models for Osteoporosis Research

PURPOSE OF THE REVIEW

This review summarizes research on the use of sheep and goats as large animal models of human osteoporosis for preclinical and translational studies.

RECENT FINDINGS

The most frequent osteoporotic sheep model used is the ovariectomized sheep with 12 months post-operatively or more and the combined treatment of ovariectomized sheep associated to calcium/vitamin D-deficient diet and glucocorticoid applications for 6 months, but other methods are also described, like pinealectomy or hypothalamic-pituitary disconnection in ovariectomized sheep. The goat model for osteoporosis research has been used in a very limited number of studies in osteoporosis research relative to sheep. These osteoporotic small ruminant models are applied for biomaterial research, bone augmentation, efficacy of implant fixation, fragility fracture-healing process improvement, or bone-defect repair studies in the osteopenic or osteoporotic bone. Sheep are a recognized large animal model for preclinical and translational studies in osteoporosis research and the goat to a lesser extent. Recently, the pathophysiological mechanism underlying induction of osteoporosis in glucocorticoid-treated ovariectomized aged sheep was clarified, being similar to what occurs in postmenopausal women with glucocorticoid-induced osteoporosis. It was also concluded that the receptor activator of NF-κB ligand was stimulated in the late progressive phase of the osteoporosis induced by steroids in sheep. The knowledge of the pathophysiological mechanisms at the cellular and molecular levels of the induction of osteoporosis in small ruminants, if identical to humans, will allow in the future, the use of these animal models with greater confidence in the preclinical and translational studies for osteoporosis research.

Cell-laden composite suture threads for repairing damaged tendons

Tendons have limited regenerative capacity due to their low cellularity and hypovascular nature, which results in poor clinical outcomes of presently used therapies. As tendon injuries are often observed in active adults, it poses an increasing socio-economic burden on healthcare systems. Currently, suture threads are used during surgical repair to anchor the tissue graft or to connect injured ends. Here, we created composite suture threads coated with a layer of cell-laden hydrogel that can be used for bridging the injured tissue aiming at tendon regeneration. In addition, the fibres can be used to engineer 3-dimensional constructs through textile processes mimicking the architecture and mechanical properties of soft tissues, including tendons and ligaments. Encapsulated human tendon-derived cells migrated within the hydrogel and aligned at the surface of the core thread. An up-regulation of tendon-related genes (scleraxis and tenascin C) and genes involved in matrix remodelling (matrix metalloproteinases 1, matrix metalloproteinases 2) was observed. Cells were able to produce a collagen-rich matrix, remodelling their micro-environment, which is structurally comparable to native tendon tissue.

The effects of platelet lysate patches on the activity of tendon-derived cells

Platelet-derived biomaterials are widely explored as cost-effective sources of therapeutic factors, holding a strong potential for endogenous regenerative medicine. Particularly for tendon repair, treatment approaches that shift the injury environment are explored to accelerate tendon regeneration. Herein, genipin-crosslinked platelet lysate (PL) patches are proposed for the delivery of human-derived therapeutic factors in patch augmentation strategies aiming at tendon repair. Developed PL patches exhibited a controlled release profile of PL proteins, including bFGF and PDGF-BB. Additionally, PL patches exhibited an antibacterial effect by preventing the adhesion, proliferation and biofilm formation by S. aureus, a common pathogen in orthopaedic surgical site infections. Furthermore, these patches supported the activity of human tendon-derived cells (hTDCs). Cells were able to proliferate over time and an up-regulation of tenogenic genes (SCX, COL1A1 and TNC) was observed, suggesting that PL patches may modify the behavior of hTDCs. Accordingly, hTDCs deposited tendon-related extracellular matrix proteins, namely collagen type I and tenascin C. In summary, PL patches can act as a reservoir of biomolecules derived from PL and support the activity of native tendon cells, being proposed as bioinstructive patches for tendon regeneration.

STATEMENT OF SIGNIFICANCE

Platelet-derived biomaterials hold great interest for the delivery of therapeutic factors for applications in endogenous regenerative medicine. In the particular case of tendon repair, patch augmentation strategies aiming at shifting the injury environment are explored to improve tendon regeneration. In this study, PL patches were developed with remarkable features, including the controlled release of growth factors and antibacterial efficacy. Remarkably, PL patches supported the activity of native tendon cells by up-regulating tenogenic genes and enabling the deposition of ECM proteins. This patch holds great potential towards simultaneously reducing post-implantation surgical site infections and promoting tendon regeneration for prospective in vivo applications.

Crosstalk between adipose stem cells and tendon cells reveals a temporal regulation of tenogenesis by matrix deposition and remodeling

Tendon injuries constitute an unmet clinical challenge owing to the limited intrinsic regenerative ability of this tissue. Cell-based therapies aim at improving tendon healing through the delicate orchestration of tissue rebuilding and regain of function. Hence, human adipose-derived stem cells (hASCs) have been proposed as a promising cell source for boosting tendon regeneration. In this work, we investigated the influence of hASCs on native human tendon-derived cells (hTDCs) through the establishment of a direct contact co-culture system. Results demonstrated that direct interactions between these cell types resulted in controlled proliferation and spontaneous cell elongation. ECM-related genes, particularly COL1A1 and TNC, and genes involved in ECM remodeling, such as MMP1, MMP2, MMP3, and TIMP1, were expressed in co-culture in a temporally regulated manner. In addition, deposition of collagen type I was accelerated in co-culture systems and favored over the production of collagen type III, resulting in an enhanced COL1/COL3 ratio as soon as 7 days. In conclusion, hASCs seem to be good candidates in modulating the behavior of native tendon cells, particularly through a balanced process of ECM synthesis and degradation.

Tendon explant cultures to study the communication between adipose stem cells and native tendon niche

Poor clinical outcomes of tendon repair, together with limited regenerative capacity of the tissue, have triggered the search for alternative regenerative medicine strategies. Human adipose-derived stem cells (hASCs) are being investigated as a promising cell source in contributing for tendon repopulation and reconstruction. However, the mechanisms involved in a potential beneficial effect in tendon regeneration are still to be uncovered. To gain further insights on the bi-directional crosstalk occurring between stem cells and the native tendon niche, it was used an indirect (trans-well) system for co-culturing human tendon explants and hASCs. The maintenance of tissue architecture was studied up to 14 days by histological techniques. The secretion of MMPs was evaluated at day 3. The behavior of hASCs was assessed regarding cell elongation and extracellular matrix (ECM) production. The paracrine communication enhanced collagenolytic activity of MMPs in co-cultures at day 3, in comparison to hASCs alone or tendon explants alone, suggesting that ECM remodeling is triggered early in culture. Moreover, hASCs were spontaneously more elongated in co-cultures and the deposition of collagen type III and tenascin-C by hASCs in co-culture was observed at a lower extent after 7 days, in comparison to hASCs alone, being lately recovered at day 14. Overall, explant co-cultures established herein may constitute a tool for replicating the first steps in tendon healing and help uncovering the bi-directional communication occurring between hASCs and the native tendon niche.

Supercritical Fluid Technology as a Tool to Prepare Gradient Multifunctional Architectures Towards Regeneration of Osteochondral Injuries

Platelet lysates (PLs) are a natural source of growth factors (GFs) known for its stimulatory role on stem cells which can be obtained after activation of platelets from blood plasma. The possibility to use PLs as growth factor source for tissue healing and regeneration has been pursued following different strategies. Platelet lysates are an enriched pool of growth factors which can be used as either a GFs source or as a three-dimensional (3D) hydrogel. However, most of current PLs-based hydrogels lack stability, exhibiting significant shrinking behavior. This chapter focuses on the application of supercritical fluid technology to develop three-dimensional architectures of PL constructs, crosslinked with genipin. The proposed technology allows in a single step operation the development of mechanically stable porous structures, through chemical crosslinking of the growth factors present in the PL pool, followed by supercritical drying of the samples. Furthermore gradient structures of PL-based structures with bioactive glass are also presented and are described as an interesting approach to the treatment of osteochondral defects.

Engineering magnetically responsive tropoelastin spongy-like hydrogels for soft tissue regeneration

Magnetic biomaterials are a key focus in medical research.

Tissue-engineered magnetic cell sheet patches for advanced strategies in tendon regeneration

Tendons are powerful 3D biomechanically structures combining a few cells in an intrincated and highly hierarchical niche environment. When tendon homeostasis is compromised, restoration of functionality upon injury is limited and requires alternatives to current augmentation or replacement strategies. Cell sheet technologies are a powerful tool for the fabrication of living extracellular-rich patches towards regeneration of tenotopic defects. Thus, we originally propose the development of magnetically responsive tenogenic patches through magnetic cell sheet (magCSs) technology that enable the remote control upon implantation of the tendon-mimicking constructs. A Tenomodulin positive (TNMD⁺) subpopulation of cells sorted from a crude population of human adipose stem cells (hASCs) previously identified as being prone to tenogenesis was selected for the magCSs patch construction. We investigated the stability, the cellular co-location of the iron oxide nanoparticles (MNPs), as well as the morphology and mechanical properties of the developed magCSs. Moreover, the expression of tendon markers and collagenous tendon-like matrix were further assessed under the actuation of an external magnetic field. Overall, this study confirms the potential to bioengineer tendon patches using a magnetic cell sheet construction with magnetic responsiveness, good mechanoelastic properties and a tenogenic prone stem cell population envisioning cell-based functional therapies towards tendon regeneration.

STATEMENT OF SIGNIFICANCE

The concept of magnetic force-based tissue engineering may assist the development of innovative solutions to treat tendon (or other tissues) disorders upon remote control of biological processes as cell migration or differentiation. Herein, we originally fabricated magnetic responsive cell sheets (magCSs) with a Tenomodulin positive subpopulation of adipose tissue derived stem cells identified to commit to the tenogenic lineage. To the best of authors knowledge, this is the first time a tendon oriented strategy resorting on magCSsis reported. Moreover, the promising role of tenogenic living constructs fabricated as magnetically responsive ECM-rich patches is highlighted, envisioning the stimulation of endogenous regenerative mechanisms. Altogether, these findings contribute to future stem cell studies and their translation toward tendon therapies.

Effects of hypergravity on the angiogenic potential of endothelial cells

Angiogenesis, the formation of blood vessels from pre-existing ones, is a key event in pathology, including cancer progression, but also in homeostasis and regeneration. As the phenotype of endothelial cells (ECs) is continuously regulated by local biomechanical forces, studying endothelial behaviour in altered gravity might contribute to new insights towards angiogenesis modulation. This study aimed at characterizing EC behaviour after hypergravity exposure (more than 1g), with special focus on cytoskeleton architecture and capillary-like structure formation. Herein, human umbilical vein ECs (HUVECs) were cultured under two-dimensional and three-dimensional conditions at 3g and 10g for 4 and 16 h inside the large diameter centrifuge at the European Space Research and Technology Centre (ESTEC) of the European Space Agency. Although no significant tendency regarding cytoskeleton organization was observed for cells exposed to high g's, a slight loss of the perinuclear localization of β-tubulin was observed for cells exposed to 3g with less pronounced peripheral bodies of actin when compared with 1g control cells. Additionally, hypergravity exposure decreased the assembly of HUVECs into capillary-like structures, with a 10g level significantly reducing their organization capacity. In conclusion, short-term hypergravity seems to affect EC phenotype and their angiogenic potential in a time and g-level-dependent manner.

Human adipose tissue-derived tenomodulin positive subpopulation of stem cells: A promising source of tendon progenitor cells

Cell-based therapies are of particular interest for tendon and ligament regeneration given the low regenerative potential of these tissues. Adipose tissue is an abundant source of stem cells, which may be employed for the healing of tendon lesions. However, human adult multipotent adipose-derived stem cells (hASCs) isolated from the stromal vascular fraction of adipose tissue originate highly heterogeneous cell populations that hinder their use in specific tissue-oriented applications. In this study, distinct subpopulations of hASCs were immunomagnetic separated and their tenogenic differentiation capacity evaluated in the presence of several growth factors (GFs), namely endothelial GF, basic-fibroblast GF, transforming GF-β1 and platelet-derived GF-BB, which are well-known regulators of tendon development, growth and healing. Among the screened hASCs subpopulations, tenomodulin-positive cells were shown to be more promising for tenogenic applications and therefore this subpopulation was further studied, assessing tendon-related markers (scleraxis, tenomodulin, tenascin C and decorin) both at gene and protein level. Additionally, the ability for depositing collagen type I and III forming extracellular matrix structures were weekly assessed up to 28 days. The results obtained indicated that tenomodulin-positive cells exhibit phenotypical features of tendon progenitor cells and can be biochemically induced towards tenogenic lineage, demonstrating that this subset of hASCs can provide a reliable source of progenitor cells for therapies targeting tendon regeneration.

Self-assembled Hydrogel Fiber Bundles from Oppositely Charged Polyelectrolytes Mimic Micro-/nanoscale Hierarchy of Collagen

Fiber bundles are present in many tissues throughout the body. In most cases, collagen subunits spontaneously self-assemble into a fibrilar structure that provides ductility to bone and constitutes the basis of muscle contraction. Translating these natural architectural features into a biomimetic scaffold still remains a great challenge. Here, we propose a simple strategy to engineer biomimetic fiber bundles that replicate the self-assembly and hierarchy of natural collagen fibers. The electrostatic interaction of methacrylated gellan gum (MeGG) with a countercharged chitosan (CHT) polymer led to the complexation of the polyelectrolytes. When directed through a polydimethylsiloxane (PDMS) channel, the polyelectrolytes formed a hierarchical fibrous hydrogel demonstrating nano-scale periodic light/dark bands similar to D-periodic bands in native collagen and aligned parallel fibrils at micro-scale. Importantly, collagen-mimicking hydrogel fibers exhibited robust mechanical properties (MPa scale) at a single fiber bundle level and enabled encapsulation of cells inside the fibers under cell-friendly mild conditions. Presence of carboxyl- (in gellan gum) or amino- (in chitosan) functionalities further enabled controlled peptide functionalization such as RGD for biochemical mimicry (cell adhesion sites) of native collagen. This biomimetic aligned fibrous hydrogel system can potentially be used as a scaffold for tissue engineering as well as a drug/gene delivery vehicle.

Uncovering the effect of low-frequency static magnetic field on tendon-derived cells: from mechanosensing to tenogenesis

Magnetotherapy has been receiving increased attention as an attractive strategy for modulating cell physiology directly at the site of injury, thereby providing the medical community with a safe and non-invasive therapy. Yet, how magnetic field influences tendon cells both at the cellular and molecular levels remains unclear. Thus, the influence of a low-frequency static magnetic field (2 Hz, 350 mT) on human tendon-derived cells was studied using different exposure times (4 and 8 h; short-term studies) and different regimens of exposure to an 8h-period of magnetic stimulation (continuous, every 24 h or every 48 h; long-term studies). Herein, 8 h stimulation in short-term studies significantly upregulated the expression of tendon-associated genes SCX, COL1A1, TNC and DCN (p < 0.05) and altered intracellular Ca2+ levels (p < 0.05). Additionally, every 24 h regimen of stimulation significantly upregulated COL1A1, COL3A1 and TNC at day 14 in comparison to control (p < 0.05), whereas continuous exposure differentially regulated the release of the immunomodulatory cytokines IL-1β and IL-10 (p < 0.001) but only at day 7 in comparison to controls. Altogether, these results provide new insights on how low-frequency static magnetic field fine-tune the behaviour of tendon cells according to the magnetic settings used, which we foresee to represent an interesting candidate to guide tendon regeneration.

Evaluation of bone turnover markers and serum minerals variations for predicting fracture healing versus non-union processes in adult sheep as a model for orthopedic research

Bone turnover markers (BTMs) have been considered as an auxiliary method of following the fracture healing process and for early prediction of impaired bone healing. A better understanding of the potential of BTMs in this application could allow for earlier interventions and improved patient care. The aim of this study with a large animal experimental model was to assess the variation of bone formation markers - namely the total alkaline phosphatase (ALP) and its bone-specific isoform (BALP), serum concentration of intact osteocalcin (OC), N-terminal propeptide type III procollagen (PIIINP) and of bone resorption markers - namely tartrate resistant acid phosphatase (TRAP) and deoxypyridinoline crosslink (DPD) during the first stages of a normal fracture healing process and of a segmental critical size defect (CSD), which progresses to a non-union process. Thirty healthy female sheep (Portuguese Churra-da-Terra-Quente breed), approximately 4-years-old, were enrolled in this study. Jugular venous blood samples were collected pre-operatively and at 1, 2, 3, 4, 6, 8, 10 and 12 post-operative weeks. The animals of the CSD group showed significant lower serum levels of BALP, OC and significant higher serum PIIINP levels at early stages of the fracture healing process, compared with animals that progressed in a normal fracture healing process. Serum BALP, OC and PIIINP levels could be useful as non-invasive auxiliary tools with other complementary methods for predicting the outcome of traumatic bone fractures.

3D Mimicry of Native-Tissue-Fiber Architecture Guides Tendon-Derived Cells and Adipose Stem Cells into Artificial Tendon Constructs

Tendon and ligament (T/L) function is intrinsically related with their unique hierarchically and anisotropically organized extracellular matrix. Their natural healing capacity is, however, limited. Here, continuous and aligned electrospun nanofiber threads (CANT) based on synthetic/natural polymer blends mechanically reinforced with cellulose nanocrystals are produced to replicate the nanoscale collagen fibrils grouped into microscale collagen fibers that compose the native T/L. CANT are then incrementally assembled into 3D hierarchical scaffolds, resulting in woven constructions, which simultaneously mimic T/L nano-to-macro architecture, nanotopography, and nonlinear biomechanical behavior. Biological performance is assessed using human-tendon-derived cells (hTDCs) and human adipose stem cells (hASCs). Scaffolds nanotopography and microstructure induce a high cytoskeleton elongation and anisotropic organization typical of tendon tissues. Moreover, the expression of tendon-related markers (Collagen types I and III, Tenascin-C, and Scleraxis) by both cell types, and the similarities observed on their expression patterns over time suggest that the developed scaffolds not only prevent the phenotypic drift of hTDCs, but also trigger tenogenic differentiation of hASCs. Overall, these results demonstrate a feasible approach for the scalable production of 3D hierarchical scaffolds that exhibit key structural and biomechanical properties, which can be advantageously explored in acellular and cellular T/L TE strategies.

Multifunctional magnetic-responsive hydrogels to engineer tendon-to-bone interface

Photocrosslinkable magnetic hydrogels are attracting great interest for tissue engineering strategies due to their versatility and multifunctionality, including their remote controllability ex vivo, thus enabling engineering complex tissue interfaces. This study reports the development of a photocrosslinkable magnetic responsive hydrogel made of methacrylated chondroitin sulfate (MA-CS) enriched with platelet lysate (PL) with tunable features, envisioning their application in tendon-to-bone interface. MA-CS coated iron-based magnetic nanoparticles were incorporated to provide magnetic responsiveness to the hydrogel. Osteogenically differentiated adipose-derived stem cells and/or tendon-derived cells were encapsulated within the hydrogel, proliferating and expressing bone- and tendon-related markers. External magnetic field (EMF) application modulated the swelling, degradation and release of PL-derived growth factors, and impacted both cell morphology and the expression and synthesis of tendon- and bone-like matrix with a more evident effect in co-cultures. Overall, the developed magnetic responsive hydrogel represents a potential cell carrier system for interfacial tissue engineering with EMF-controlled properties.

Periodontal tissue engineering: current strategies and the role of platelet rich hemoderivatives

Periodontal tissue engineering procures to regenerate the periodontal tissue assuring the right combination of scaffolds, biochemical cues and cells. The platelet rich hemoderivatives might provide the adequate growth factors and structural proteins for the predictable regeneration of periodontium.

Assessment of bone healing ability of calcium phosphate cements loaded with platelet lysate in rat calvarial defects

Injectable calcium phosphate cements have been used as a valid alternative to autologous bone grafts for bone augmentation with the additional advantage of enabling minimally invasive implantation procedures and for perfectly fitting the tissue defect. Nevertheless, they have low biodegradability and lack adequate biochemical signaling to promote bone healing and remodeling. In previous in vitro studies, we observed that the incorporation of platelet lysate directly into the cement paste or loaded in hyaluronic acid microspheres allowed to modulate the cement degradation and the in vitro expression of osteogenic markers in seeded human adipose derived stem cells. The present study aimed at investigating the possible effect of this system in new bone formation when implanted in calvarial bilateral defects in rats. Different formulations were assessed, namely plain calcium phosphate cements, calcium phosphate cements loaded with human platelet lysate, hybrid injectable formulations composed of the calcium phosphate cement incorporating hyaluronin acid non-loaded microparticles (20% hyaluronin acid) or with particles loaded with platelet lysate. The degradability and new bone regrowth were evaluated in terms of mineral volume in the defect, measured by micro-computed tomography and histomorphometric analysis upon 4, 8 and 12 weeks of implantation. We observed that the incorporation of hyaluronin acid microspheres induced an overly rapid cement degradation, impairing the osteoconductive properties of the cement composites. Moreover, the incorporation of platelet lysate induced higher bone healing than the materials without platelet lysate, up to four weeks after surgery. Nevertheless, this effect was not found to be significant when compared to the one observed in the sham-treated group.

Production and characterization of hyaluronic acid microparticles for the controlled delivery of growth factors using a spray/dehydration method

Hyaluronic acid is the main polysaccharide present in the connective tissue. Besides its structural function as backbone of the extracellular matrix, hyaluronic acid plays staple roles in several biological processes including the modulation of inflammation and wound healing processes. The application of hyaluronic acid in regenerative medicine, either as cells and/or drug/growth factors delivery vehicles, relies on its ability to be cross-linked using a plethora of reactions, producing stable hydrogels. In this work, we propose a novel method for the production of hyaluronic acid microparticles that presents several advantages over others that have been used. Basically, droplets of hyaluronic acid solution produced with a nozzle are collected in an isopropanol dehydration bath, and stabilized after crosslinking with adipic acid dihydrazide, using a cabodiimide-based chemistry. The size and morphology of the hyaluronic acid microparticles produced by this method varied with the molecular weight and concentration of the hyaluronic acid solution, the nozzle chamber pressure, the distance between the nozzle and the crosslinking solution, and the number of crosslinking steps. The degree of crosslinking of the hyaluronic acid microparticles produced was tunable and allowed to control the rate of the degradation promoted by hyaluronidase. Moreover, the particles were loaded with platelet lysate, a hemoderivative rich in cytokines with interest for regenerative medicine applications. The hyaluronic acid microparticles showed potential to bind selectively to positively charged molecules, as the factors present in the platelet lysate. It is envisioned that these can be further released in a sustained manner by ion exchange or by the degradation of the hyaluronic acid microparticles matrix promoted by extracellular matrix remodeling.