Specific clinical signs and symptoms are predictive of clinical course in sporadic Creutzfeldt-Jakob disease

Background and purpose

Akinetic mutism is thought to be an appropriate therapeutic end‐point in patients with sporadic Creutzfeldt−Jakob disease (sCJD). However, prognostic factors for akinetic mutism are unclear and clinical signs or symptoms that precede this condition have not been defined. The goal of this study was to identify prognostic factors for akinetic mutism and to clarify the order of clinical sign and symptom development prior to its onset.

Methods

The cumulative incidence of akinetic mutism and other clinical signs and symptoms was estimated based on Japanese CJD surveillance data (455 cases) collected from 2003 to 2008. A proportional hazards model was used to identify prognostic factors for the time to onset of akinetic mutism and other clinical signs and symptoms.

Results

Periodic synchronous discharges on electroencephalography were present in the majority of cases (93.5%). The presence of psychiatric symptoms or cerebellar disturbance at sCJD diagnosis was associated with the development of akinetic mutism [hazard ratio (HR) 1.50, 95% confidence interval (CI) 1.14–1.99, and HR 2.15, 95% CI1.61–2.87, respectively]. The clinical course from cerebellar disturbance to myoclonus or akinetic mutism was classified into three types: (i) direct path, (ii) path via pyramidal or extrapyramidal dysfunction and (iii) path via psychiatric symptoms or visual disturbance.

Conclusions

The presence of psychiatric symptoms or cerebellar disturbance increased the risk of akinetic mutism of sCJD cases with probable MM/MV subtypes. Also, there appear to be sequential associations in the development of certain clinical signs and symptoms of this disease.

Evaluation of touch-sensitive screen tablet terminal button size and spacing accounting for effect of fingertip contact angle

Touch-sensitive screen terminals enabling intuitive operation are used as input interfaces in a wide range of fields. Tablet terminals are one of the most common devices with a touch-sensitive screen. They have a feature of good portability, enabling use under various conditions. On the other hand, they require a GUI designed to prevent decrease of usability under various conditions. For example, the angle of fingertip contact with the display changes according to finger posture during operation and how the case is held. When a human fingertip makes contact with an object, the contact area between the fingertip and contact object increases or decreases as the contact angle changes. A touch-sensitive screen detects positions using the change in capacitance of the area touched by the fingertip; hence, differences in contact area between the touch-sensitive screen and fingertip resulting from different forefinger angles during operation could possibly affect operability. However, this effect has never been studied. We therefore conducted an experiment to investigate the relationship between size/spacing and operability, while taking the effect of fingertip contact angle into account. As a result, we have been able to specify the button size and spacing conditions that enable accurate and fast operation regardless of the forefinger contact angle.

Nanostructure of the rust formed on low alloy steels after exposure tests in a high SOx environment

Exposure tests were performed on low alloy steels in a high SOx environment, and the structure of the rust was analyzed by TEM (Transmission Electron Microscopy) and Raman spectroscopy.

Corrosion behavior of 316L and 304 stainless steels exposed to industrial-marine-urban environment: field study

The present investigation extensively compares the pitting corrosion behavior and mechanical stability of 316L and 304 stainless steels (SS) exposed to an Industrial-Marine-Urban (IMU) environment for 3 years from April 2012–March 2015.

Positive-bias gate-controlled metal-insulator transition in ultrathin VO2 channels with TiO2 gate dielectrics

The next generation of electronics is likely to incorporate various functional materials, including those exhibiting ferroelectricity, ferromagnetism and metal-insulator transitions. Metal-insulator transitions can be controlled by electron doping, and so incorporating such a material in transistor channels will enable us to significantly modulate transistor current. However, such gate-controlled metal-insulator transitions have been challenging because of the limited number of electrons accumulated by gate dielectrics, or possible electrochemical reaction in ionic liquid gate. Here we achieve a positive-bias gate-controlled metal-insulator transition near the transition temperature. A significant number of electrons were accumulated via a high-permittivity TiO2 gate dielectric with subnanometre equivalent oxide thickness in the inverse-Schottky-gate geometry. An abrupt transition in the VO2 channel is further exploited, leading to a significant current modulation far beyond the capacitive coupling. This solid-state operation enables us to discuss the electrostatic mechanism as well as the collective nature of gate-controlled metal-insulator transitions, paving the pathway for developing functional field effect transistors.

Total extraperitoneal approach for incarcerated obturator hernia repair

PURPOSE

To compare the feasibilities and efficacies of the total extraperitoneal (TEP) technique and laparotomy for incarcerated obturator hernia repair.

METHODS

All study subjects were diagnosed with incarcerated obturator hernia, preoperatively and TEP was performed as for TEP groin hernia repair. The incarcerated intestine was retracted into the peritoneal cavity with the hernia sac. The obturator foramen was then covered with a rectangular mesh (9 × 13 cm), which also covered the internal inguinal ring, Hesselbach's triangle, and the femoral ring. Non-ischemia of the incarcerated bowel was confirmed laparoscopically. In patients undergoing laparotomy, the obturator foramen was closed by continuous sutures, and no prosthesis was used. We recorded the length of hospital stay, operative time, amount of intraoperative bleeding, and postoperative complications.

RESULTS

Twenty-two patients underwent obturator hernia repair in our hospital between January 2000 and December 2012, of whom 10 were treated with laparotomy and the remaining 12 via TEP. Three patients undergoing TEP were converted to laparotomy. The operation time was significantly longer in the conversion group compared with either the laparotomy or the TEP groups. There was no difference between the laparotomy and TEP groups regarding intraoperative bleeding. Patients who underwent TEP without conversion had a significantly shorter hospital stay than those who underwent laparotomy or required conversion.

CONCLUSIONS

TEP provides a suitable approach for incarcerated obturator hernia repair, with favorable results regarding hospital stay. TEP is a feasible, minimally invasive technique for the repair of incarcerated obturator hernias.

Carboxypeptidase B2 deficiency reveals opposite effects of complement C3a and C5a in a murine polymicrobial sepsis model

BACKGROUND AND OBJECTIVES

Carboxypeptidase B2 (CPB2) is a basic carboxypeptidase with fibrin and complement C3a and C5a as physiological substrates. We hypothesized that in polymicrobial sepsis, CPB2-deficient mice would have sustained C5a activity, leading to disease exacerbation.

METHODS

Polymicrobial sepsis was induced by cecal ligation and puncture (CLP).

RESULTS

Contrary to our hypothesis, Cpb2(-/-) mice had significantly improved survival, with reduced lung edema, less liver and kidney damage, and less disseminated intravascular coagulation. Hepatic pro-CPB2 was induced by CLP, leading to increased pro-CPB2 levels. Thrombomodulin present on mesothelium supported thrombin activation of pro-CPB2. Both wild-type and Cpb2(-/-) animals treated with a C5a receptor antagonist had improved survival, demonstrating that C5a was detrimental in this model. Treatment with a fibrinolysis inhibitor, tranexamic acid, caused a decrease in survival in both genotypes; however, the Cpb2(-/-) animals retained their survival advantage. Administration of a C3a receptor antagonist exacerbated the disease in both wild-type and Cpb2(-/-) mice and eliminated the survival advantage of Cpb2(-/-) mice. C5a receptor is expressed in both peritoneal macrophages and neutrophils; in contrast, C3a receptor expression is restricted to peritoneal macrophages, and C3a induced signaling in macrophages but not neutrophils.

CONCLUSIONS

While C5a exacerbates the peritonitis, resulting in a deleterious generalized inflammatory state, C3a activation of peritoneal macrophages may limit the initial infection following CLP, thereby playing a diametrically opposing protective role in this polymicrobial sepsis model.

Usefulness of direct-conversion flat-panel detector system as a quality assurance tool for high-dose-rate 192Ir source

The routine quality assurance (QA) procedure for a high-dose-rate (HDR) 192Ir radioactive source is an important task to provide appropriate brachytherapy. Traditionally, it has been difficult to obtain good quality images using the 192Ir source due to irradiation from the high-energy gamma rays. However, a direct-conversion flat-panel detector (d-FPD) has made it possible to confirm the localization and configuration of the 192Ir source. The purpose of the present study was to evaluate positional and temporal accuracy of the 192Ir source using a d-FPD system, and the usefulness of d-FPD as a QA tool. As a weekly verification of source positional accuracy test, we obtained 192Ir core imaging by single-shot radiography for three different positions (1300/1400/1500 mm) of a check ruler. To acquire images for measurement of the 192Ir source movement distance with varying interval steps (2.5/5.0/10.0 mm) and temporal accuracy, we used the high-speed image acquisition technique and digital subtraction. For accuracy of the 192Ir source dwell time, sequential images were obtained using various dwell times ranging from 0.5 to 30.0 sec, and the acquired number of image frames was assessed. Analysis of the data was performed using the measurement analysis function of the d-FPD system. Although there were slight weekly variations in source positional accuracy, the measured positional errors were less than 1.0 mm. For source temporal accuracy, the temporal errors were less than 1.0%, and the correlation between acquired frames and programmed time showed excellent linearity (R2 = 1). All 192Ir core images were acquired clearly without image halation, and the data were obtained quantitatively. All data were successfully stored in the picture archiving and communication system (PACS) for time-series analysis. The d-FPD is considered useful as the QA tool for the 192Ir source.