Flow Analysis in Vascular Shunts that Bypass the Carotid Artery

When blood flow through a carotid artery is impaired and vascular surgery is necessary to restore adequate circulation a vascular shunt can be applied to maintain cerebral blood flow. Several vascular shunts are commercially available, but there is only limited test data on their flow capacity. The purpose of this study is to determine the flow capacity of three vascular shunt systems. A theoretical model has been developed for this purpose. To validate the model, in vitro flow measurements were taken. Application of the model showed that all shunts cause a decrease in blood flow. The amount of flow decrease varied widely from 13% (Javid shunt) to 55% (Pruitt-Inahara). In vitro measurements confirmed the validity of the model.

In conclusion, it is important for the vascular surgeon to realise that vascular shunts show large differences in flow capacity. Of the three investigated shunts, the Javid has the highest flow capacity.

Evaluating the effect of enzymatic pretreatment on the anaerobic digestibility of pulp and paper biosludge

•

A new and rigorous approach for assessing the effect of enzymatic pretreatment on AD is proposed.

•

Enzymes can improve anaerobic digestion increasing biogas yields by up to 26%.

•

First study to isolate the effect of catalytic activity and organic load from enzymes to evaluate enzymatic pretreatment.

•

Enzymes did not appear to be inhibited or denatured in the presence of biosludge.

Anaerobic digestion of biosludge has not yet been implemented in pulp mills due to low biogas yields. Enzymatic pretreatment of biosludge has shown improvements in biogas yields but results are varied. A key limitation of previous studies is that they fail to consider the COD contribution from the enzyme solutions. The aim of this study was to systematically investigate the potential for enzymatic pretreatment on the anaerobic digestibility of pulp mill biosludge. Out of the six enzymes tested, four enhanced the anaerobic digestibility of biosludge. At the end of the BMP, a maximum improvement of 26% in biogas yield was observed with protease from B. licheniformis. There was no correlation between enzymatic activities on standard substrates and/or on biosludge and the effect of enzymes on biogas yields. Enzymes have potential for improving biosludge anaerobic digestibility but more research on optimal conditions and potential synergies with other pretreatment is needed.

Characterization of aluminum, aluminum oxide and titanium dioxide nanomaterials using a combination of methods for particle surface and size analysis

The application of appropriate analytical techniques is essential for nanomaterial (NM) characterization. In this study, we compared different analytical techniques for NM analysis. Regarding possible adverse health effects, ionic and particulate NM effects have to be taken into account. As NMs behave quite differently in physiological media, special attention was paid to techniques which are able to determine the biosolubility and complexation behavior of NMs. Representative NMs of similar size were selected: aluminum (Al⁰) and aluminum oxide (Al₂O₃), to compare the behavior of metal and metal oxides. In addition, titanium dioxide (TiO₂) was investigated. Characterization techniques such as dynamic light scattering (DLS) and nanoparticle tracking analysis (NTA) were evaluated with respect to their suitability for fast characterization of nanoparticle dispersions regarding a particle's hydrodynamic diameter and size distribution. By application of inductively coupled plasma mass spectrometry in the single particle mode (SP-ICP-MS), individual nanoparticles were quantified and characterized regarding their size. SP-ICP-MS measurements were correlated with the information gained using other characterization techniques, i.e. transmission electron microscopy (TEM) and small angle X-ray scattering (SAXS). The particle surface as an important descriptor of NMs was analyzed by X-ray diffraction (XRD). NM impurities and their co-localization with biomolecules were determined by ion beam microscopy (IBM) and confocal Raman microscopy (CRM). We conclude advantages and disadvantages of the different techniques applied and suggest options for their complementation. Thus, this paper may serve as a practical guide to particle characterization techniques.

The application of appropriate analytical techniques is essential for nanomaterial (NM) characterization.

Detection of Short-Waved Spin Waves in Individual Microscopic Spin-Wave Waveguides Using the Inverse Spin Hall Effect

The miniaturization of complementary metal-oxide-semiconductor (CMOS) devices becomes increasingly difficult due to fundamental limitations and the increase of leakage currents. Large research efforts are devoted to find alternative concepts that allow for a larger data-density and lower power consumption than conventional semiconductor approaches. Spin waves have been identified as a potential technology that can complement and outperform CMOS in complex logic applications, profiting from the fact that these waves enable wave computing on the nanoscale. The practical application of spin waves, however, requires the demonstration of scalable, CMOS compatible spin-wave detection schemes in material systems compatible with standard spintronics as well as semiconductor circuitry. Here, we report on the wave-vector independent detection of short-waved spin waves with wavelengths down to 150 nm by the inverse spin Hall effect in spin-wave waveguides made from ultrathin Ta/Co₈Fe₇₂B₂₀/MgO. These findings open up the path for miniaturized scalable interconnects between spin waves and CMOS and the use of ultrathin films made from standard spintronic materials in magnonics.

Prognostic scores for sorafenib-treated hepatocellular carcinoma patients: A new application for the hepatoma arterial embolisation prognostic score

BACKGROUND

No prognostic classification is currently used for patients treated with systemic therapies for Hepatocellular Carcinoma (HCC).

METHODS

We retrospectively analysed data from patients treated with sorafenib for HCC from five centres in France and in the United Kingdom (UK). The training set comprised data from two centres and the validation set from three. Variables independently associated with Overall Survival (OS) in the training set were used to build the SAP (Sorafenib Advanced HCC Prognosis) score. The score was tested in the validation set, then compared with other prognostication systems.

RESULTS

The training set and validation set included 370 and 468 patients respectively. In the training set, variables independently associated with OS in multivariable analysis were: performance status (PS) >0, alpha-fetoprotein (AFP) >400 ng/ml, tumour size >7 cm, bilirubin >17 μmol/l and albumin <36 g/l. The SAP score was built giving one point to each abnormal variable, and three classes were constructed. The SAP score was significantly associated with OS in the training set, with median OS of 14.9 months for SAP A, 7.2 months for SAP B and 2.5 months for SAP C (P < 0.001). In the validation set, the SAP score was significantly associated with OS, and showed greater discriminative abilities than Barcelona Clinic Liver Cancer (BCLC) and albumin-bilirubin (ALBI) scores. However, the hepatoma arterial embolisation prognostic (HAP) score showed greater discriminative abilities than the SAP score.

CONCLUSION

In European patients treated with sorafenib, the HAP was the most discriminant prognostic score and may facilitate stratification in trials and inform clinical decision making.

QLiS-SF: Development of a short form of the quality of life in schizophrenia questionnaire

BACKGROUND

There is a need for useful standardized Quality of Life (QoL) measures for people diagnosed with schizophrenia. Therefore, a short form of the self-administered Quality of Life in Schizophrenia (QLiS) scale was developed and validated.

METHODS

Four steps were taken to develop the abridged version using samples from the Clinical Analysis of the Treatment of Schizophrenia (CATS) study. Firstly, a model with second order scales was developed using exploratory factor analysis (EFA). Secondly, it was tested in an independent sample using confirmatory factor analysis (CFA). Thirdly, this model served as the basis for selecting items for the short form. Distributional properties, content reviews, and factor loadings were taken into account in this step. Fourthly, the resulting short form was validated through confirmatory factor analysis (CFA). Composite reliability scores were calculated for the new subscales.

RESULTS

Three second order scales were constructed: illness-related quality of life (QoL), social life and finances, and global subjective well-being. CFA of the new theoretical model resulted in a CFI of 0.67 and absolute fit indices of CMIN/df = 2.55, RMSEA = 0.08, SRMR = 0.09. The selected 13 items showed good statistical properties and good fit of content to subscale. Fit of the underlying theoretical model with the reduced number of items was tested in an independent sample. Absolute and fit indices of the short form model were satisfactory (CFI = 0.95, CMIN/df = 2.23, RMSEA = 0.06, SRMR = 0.04). Composite reliability scores for three subscales were above 0.70.

CONCLUSIONS

The short form of the QLIS (QLiS-SF) showed good model fit and reliability. It should only be considered for use if the application of the long version is not suitable.

Sorafenib for the Treatment of Advanced Hepatocellular Cancer - a UK Audit

AIMS

Sorafenib is the current standard treatment for advanced hepatocellular carcinoma. We carried out a national audit of UK patients treated with sorafenib as standard-of-care and those treated with systemic therapy in first-line trials.

MATERIALS AND METHODS

Sorafenib-treated and trial-treated patients were identified via the Cancer Drugs Fund and local databases. Data were collected retrospectively from medical records according to a standard case report form. The primary outcome measure was overall survival, estimated by the Kaplan-Meier method.

RESULTS

Data were obtained for 448 sorafenib-treated patients from 15 hospitals. The median age was 68 years (range 17-89) and 75% had performance status ≤ 1. At baseline, 77% were Child-Pugh A and 16.1% Child-Pugh B; 38% were albumin-bilirubin grade 1 (ALBI-1) and 48% ALBI-2; 23% were Barcelona Clinic Liver Classification B (BCLC-B) and 72% BCLC-C. The median time on sorafenib was 3.6 months, with a mean daily dose of 590 mg. The median overall survival for 448 evaluable sorafenib-treated patients was 8.5 months. There were significant differences in overall survival comparing Child-Pugh A versus Child-Pugh B (9.5 versus 4.6 months), ALBI-1 versus ALBI-2 (12.9 versus 5.9 months) and BCLC-B versus BCLC-C (13.0 versus 8.3 months). For trial-treated patients (n=109), the median overall survival was 8.1 months and this was not significantly different from the sorafenib-treated patients.

CONCLUSION

For Child-Pugh A patients with good performance status, survival outcomes were similar to those reported in global randomised controlled trials. Patients with ALBI grade > 1, Child-Pugh B or poor performance status seem to derive limited benefit from sorafenib treatment.

The Influence of Different Melt Temperatures on the Mechanical Properties of Injection Molded PA-12 and the Post Process Detection by Thermal Analysis

Polyamide 12 (PA-12) test plates were injection molded using different melt temperatures and the influence on mechanical properties was investigated using quasi-static tensile and instrumented impact behavior in two conditioned states: dried, and following accelerated moisture intake. Energy absorption in tension is strongly dependent on process temperature (variations up to 99%) and additional variation (around 18%) was evident when testing at different conditioning states. Under high-velocity loading, the total impact energy varied by up to 8.70% and 9.05%, when systematic changes were made to process melt temperature and at moisture content, respectively, with all samples failing ductile. Differential Scanning Calorimetry (DSC) was used to characterise the unique endothermic melting behavior of molded PA-12 samples, by linking different process histories to the respective mechanical properties. With focus on the first heating curve progression, significant changes within the endothermic melting region were pointed out and quantified by using MatLab (software), proving DSC as a reliable testing tool for post-production analysis with increased practical implications regarding quality control as well as failure analysis. Findings for the initial heating curve progression were explained by studying the re-crystallisation peak values during cooling phase and obtained data for the second heating.

Examining habituation and sensitization across repetitive laboratory stress inductions using the MAST

Reliably eliciting acute stress repeatedly over time is of indispensable value for research into stress vulnerability and for developing interventions aimed at increasing stress resiliency. Here, we evaluated whether the Maastricht Acute Stress Test (MAST), a potent stress protocol that combines physical and psychosocial stress components, can be used to reliably elicit subjective and neuroendocrine stress responses multiple times. Sixty healthy undergraduate participants were exposed to the MAST on three occasions, with intervals of three-weeks and one-month in between sessions. Results showed no significant signs of habituation or sensitization to the MAST in terms of subjective or physiological (salivary alpha-amylase and cortisol) stress reactivity. Fifty-nine percent of the sample displayed a significant physiological stress response (i.e., cortisol) to two MAST exposures and 57% to every MAST exposure. This study demonstrates that the MAST can be used to repeatedly induce significant stress responses.

Prospective assessment of cosmesis before and after genital surgery

INTRODUCTION

Little data exist about the surgical interventions taking place for children with disorders of sex development (DSD). Most studies that have evaluated cosmetic outcomes after genitoplasty have included retrospective ratings by a physician at a single center.

OBJECTIVE

The present study aimed to: 1) describe frequency of sex assignment, and types of surgery performed in a cohort of patients with moderate-to-severe genital ambiguity; and 2) prospectively determine cosmesis ratings by parents and surgeons before and after genital surgery.

STUDY DESIGN

This prospective, observational study included children aged <2 years of age, with no prior genitoplasty at the time of enrollment, moderate-to-severe genital atypia, and being treated at one of 11 children's hospitals in the United States of America (USA). Clinical information was collected, including type of surgery performed. Parents and the local pediatric urologist rated the cosmetic appearance of the child's genitalia prior to and 6 months after genitoplasty.

RESULTS

Of the 37 children meeting eligibility criteria, 20 (54%) had a 46,XX karyotype, 15 (40%) had a 46,XY karyotype, and two (5%) had sex chromosome mosaicism. The most common diagnosis overall was congenital adrenal hyperplasia (54%). Thirty-five children had surgery; 21 received feminizing genitoplasty, and 14 had masculinizing genitoplasty. Two families decided against surgery. At baseline, 22 mothers (63%), 14 fathers (48%), and 35 surgeons (100%) stated that they were dissatisfied or very dissatisfied with the appearance of the child's genitalia. Surgeons rated the appearance of the genitalia significantly worse than mothers (P < 0.001) and fathers (P ≤ 0.001) at baseline. At the 6-month postoperative visit, cosmesis ratings improved significantly for all groups (P < 0.001 for all groups). Thirty-two mothers (94%), 26 fathers (92%), and 31 surgeons (88%) reported either a good outcome, or they were satisfied (see Summary Figure); there were no significant between-group differences in ratings.

DISCUSSION

This multicenter, observational study showed surgical interventions being performed at DSD centers in the USA. While parent and surgeon ratings were discordant pre-operatively, they were generally concordant postoperatively. Satisfaction with postoperative cosmesis does not necessarily equate with satisfaction with the functional outcome later in life.

CONCLUSION

In this cohort of children with genital atypia, the majority had surgery. Parents and surgeons all rated the appearance of the genitalia unfavorably before surgery, with surgeons giving worse ratings than parents. Cosmesis ratings improved significantly after surgery, with no between-group differences.

Developments in spontaneous and coherent Raman scattering microscopic imaging for biomedical applications

First, the potential role of Raman-based techniques in biomedicine is introduced. Second, an overview about the instrumentation for spontaneous and coherent Raman scattering microscopic imaging is given with a focus of recent developments. Third, imaging strategies are summarized including sequential registration with laser scanning microscopes, line imaging and global or wide-field imaging. Finally, examples of biomedical applications are presented in the context of single cells, laser tweezers, tissue sections, biopsies and whole animals.

Phase-to-intensity conversion of magnonic spin currents and application to the design of a majority gate

Magnonic spin currents in the form of spin waves and their quanta, magnons, are a promising candidate for a new generation of wave-based logic devices beyond CMOS, where information is encoded in the phase of travelling spin-wave packets. The direct readout of this phase on a chip is of vital importance to couple magnonic circuits to conventional CMOS electronics. Here, we present the conversion of the spin-wave phase into a spin-wave intensity by local non-adiabatic parallel pumping in a microstructure. This conversion takes place within the spin-wave system itself and the resulting spin-wave intensity can be conveniently transformed into a DC voltage. We also demonstrate how the phase-to-intensity conversion can be used to extract the majority information from an all-magnonic majority gate. This conversion method promises a convenient readout of the magnon phase in future magnon-based devices.