Spatially controlled fabrication of a bright fluorescent nanodiamond-array with enhanced far-red Si-V luminescence

We demonstrate a novel approach to precisely pattern fluorescent nanodiamond-arrays with enhanced far-red intense photostable luminescence from silicon-vacancy (Si-V) defect centers. The precision-patterned pre-growth seeding of nanodiamonds is achieved by a scanning probe 'dip-pen' nanolithography technique using electrostatically driven transfer of nanodiamonds from 'inked' cantilevers to a UV-treated hydrophilic SiO2 substrate. The enhanced emission from nanodiamond dots in the far-red is achieved by incorporating Si-V defect centers in a subsequent chemical vapor deposition treatment. The development of a suitable nanodiamond ink and mechanism of ink transport, and the effect of humidity and dwell time on nanodiamond patterning are investigated. The precision patterning of as-printed (pre-CVD) arrays with dot diameter and dot height as small as 735 nm ± 27 nm and 61 nm ± 3 nm, respectively, and CVD-treated fluorescent ND-arrays with consistently patterned dots having diameter and height as small as 820 nm ± 20 nm and, 245 nm ± 23 nm, respectively, using 1 s dwell time and 30% RH is successfully achieved. We anticipate that the far-red intense photostable luminescence (~738 nm) observed from Si-V defect centers integrated in spatially arranged nanodiamonds could be beneficial for the development of next generation fluorescence-based devices and applications.

Cleaning, disinfection and sterilization of surface prion contamination

BACKGROUND

Prion contamination is a risk during device reprocessing, being difficult to remove and inactivate. Little is known of the combined effects of cleaning, disinfection and sterilization during a typical reprocessing cycle in clinical practice.

AIM

To investigate the combination of cleaning, disinfection and/or sterilization on reducing the risk of surface prion contamination.

METHODS

In vivo test methods were used to study the impact of cleaning alone and cleaning combined with thermal disinfection and high- or low-temperature sterilization processes. A standardized test method, based on contamination of stainless steel wires with high titres of scrapie-infected brain homogenates, was used to determine infectivity reduction.

FINDINGS

Traditional chemical methods of surface decontamination against prions were confirmed to be effective, but extended steam sterilization was more variable. Steam sterilization alone reduced the risk of prion contamination under normal or extended exposure conditions, but did show significant variation. Thermal disinfection had no impact in these studies. Cleaning with certain defined formulations in combination with steam sterilization can be an effective prion decontamination process, in particular with alkaline formulations. Low-temperature, gaseous hydrogen peroxide sterilization was also confirmed to reduce infectivity in the presence and absence of cleaning.

CONCLUSION

Prion decontamination is affected by the full reprocessing cycle used on contaminated surfaces. The correct use of defined cleaning, disinfection and sterilization methods as tested in this report in the scrapie infectivity assay can provide a standard precaution against prion contamination.

Pan-European resistance monitoring programmes encompassing food-borne bacteria and target pathogens of food-producing and companion animals

Antimicrobial resistance is a concern both for animal and human health. Veterinary programmes monitoring resistance of animal and zoonotic pathogens are therefore essential. Various European countries have implemented national surveillance programmes, particularly for zoonotic and commensal bacteria, and the European Food Safety Authority (EFSA) is compiling the data. However, harmonisation is identified as a weakness and an essential need in order to compare data across countries. Comparisons of resistance monitoring data among national programmes are hampered by differences between programmes, such as sampling and testing methodology, and different epidemiological cut-off values or clinical breakpoints. Moreover, only very few valid data are available regarding target pathogens both of farm and companion animals. The European Animal Health Study Centre (CEESA) attempts to fill these gaps. The resistance monitoring programmes of CEESA have been a collaboration of veterinary pharmaceutical companies for over a decade and include two different projects: the European Antimicrobial Susceptibility Surveillance in Animals (EASSA) programme, which collects food-borne bacteria at slaughter from healthy animals, and the pathogen programmes that collect first-intention target pathogens from acutely diseased animals. The latter comprises three subprogrammes: VetPath; MycoPath; and ComPath. All CEESA projects include uniform sample collection and bacterial identification to species level in various European Union (EU) member states. A central laboratory conducts quantitative susceptibility testing to antimicrobial agents either important in human medicine or commonly used in veterinary medicine. This 'methodology harmonisation' allows easy comparisons among EU member states and makes the CEESA programmes invaluable to address food safety and antibiotic efficacy.

Nanofiber scaffold gradients for interfacial tissue engineering

We have designed a 2-spinnerette device that can directly electrospin nanofiber scaffolds containing a gradient in composition that can be used to engineer interfacial tissues such as ligament and tendon. Two types of nanofibers are simultaneously electrospun in an overlapping pattern to create a nonwoven mat of nanofibers containing a composition gradient. The approach is an advance over previous methods due to its versatility - gradients can be formed from any materials that can be electrospun. A dye was used to characterize the 2-spinnerette approach and applicability to tissue engineering was demonstrated by fabricating nanofibers with gradients in amorphous calcium phosphate nanoparticles (nACP). Adhesion and proliferation of osteogenic cells (MC3T3-E1 murine pre-osteoblasts) on gradients was enhanced on the regions of the gradients that contained higher nACP content yielding a graded osteoblast response. Since increases in soluble calcium and phosphate ions stimulate osteoblast function, we measured their release and observed significant release from nanofibers containing nACP. The nanofiber-nACP gradients fabricated herein can be applied to generate tissues with osteoblast gradients such as ligaments or tendons. In conclusion, these results introduce a versatile approach for fabricating nanofiber gradients that can have application for engineering graded tissues.

Nanostructured diamond coatings for orthopaedic applications

With increasing numbers of orthopaedic devices being implanted, greater emphasis is being placed on ceramic coating technology to reduce friction and wear in mating total joint replacement components, in order to improve implant function and increase device lifespan. In this chapter, we consider ultra-hard carbon coatings, with emphasis on nanostructured diamond, as alternative bearing surfaces for metallic components. Such coatings have great potential for use in biomedical implants as a result of their extreme hardness, wear resistance, low friction and biocompatibility. These ultra-hard carbon coatings can be deposited by several techniques resulting in a wide variety of structures and properties.

Analysis of K-ras gene mutations in human pancreatic cancer cell lines and in bile samples from patients with pancreatic and biliary cancers

The ras family of oncogenes are the most frequently activated group of dominant transforming genes in both human and experimental cancers. The ras family of genes encode highly similar proteins with molecular weights of 21 kDa which are thought to play a key role in signal transduction. Activation in vivo by point mutations results in the ras p21 protein being maintained in the activated form and stimulating cellular proliferation autonomously. Point mutations at codon 12 of K-ras have been observed in >75% of cases of adenocarcinomas of the exocrine pancreas. The type and frequency of K-ras gene mutations in pancreatic cancer cell lines and in bile samples from patients with cytologically-proven biliary tract malignancies and from patients with non-malignant disorders of the biliary tract were determined. Codons 12, 13 and 61 of the K-ras gene were analysed by using restriction fragment length polymorphisms created through mismatched primers during polymerase chain reaction (PCR) of genomic DNA. A mutation of codon 12 of K-ras was detected in 10 of 13 (77%) human pancreatic cancer cell lines. The amino-acid substitutions were glycine to aspartate (5 samples), arginine (2), valine (2) and cysteine (1). No mutations were found at codons 13 or 61. A mutation at codon 12 of K-ras was detected in 9 of 18 (50%) of bile samples analysed. Eleven bile samples had positive cytology for malignancy of pancreaticobiliary origin, and 4 (36%) of these had a codon 12 mutation. Mutations were detected in 5 of the 7 (71%) cytologically-negative bile samples, although malignancy was subsequently diagnosed in 2 of these patients on further histology, and was suspected in 3 other cases on clinical and radiological criteria. This method provides a rapid determination of K-ras gene mutations in bile samples for patients with pancreatic and biliary tract diseases, which may be useful when considering future therapy directed at inhibition of activated ras-induced signal transduction pathways.

In vitro studies on the effect of particle size on macrophage responses to nanodiamond wear debris

Nanostructured diamond coatings improve the smoothness and wear characteristics of the metallic component of total hip replacements and increase the longevity of these implants, but the effect of nanodiamond wear debris on macrophages needs to be determined to estimate the long-term inflammatory effects of wear debris. The objective was to investigate the effect of the size of synthetic nanodiamond particles on macrophage proliferation (BrdU incorporation), apoptosis (Annexin-V flow cytometry), metabolic activity (WST-1 assay) and inflammatory cytokine production (qPCR). RAW 264.7 macrophages were exposed to varying sizes (6, 60, 100, 250 and 500 nm) and concentrations (0, 10, 50, 100 and 200 μg ml(-1)) of synthetic nanodiamonds. We observed that cell proliferation but not metabolic activity was decreased with nanoparticle sizes of 6-100 nm at lower concentrations (50 μg ml(-1)), and both cell proliferation and metabolic activity were significantly reduced with nanodiamond concentrations of 200 μg ml(-1). Flow cytometry indicated a significant reduction in cell viability due to necrosis irrespective of particle size. Nanodiamond exposure significantly reduced gene expression of tumor necrosis factor-α, interleukin-1β, chemokine Ccl2 and platelet-derived growth factor compared to serum-only controls or titanium oxide (anatase 8 nm) nanoparticles, with variable effects on chemokine Cxcl2 and vascular endothelial growth factor. In general, our study demonstrates a size and concentration dependence of macrophage responses in vitro to nanodiamond particles as possible wear debris from diamond-coated orthopedic joint implants.

Mechano-morphological studies of aligned nanofibrous scaffolds of polycaprolactone fabricated by electrospinning

Mechanical and morphological studies of aligned nanofibrous meshes of poly(epsilon-caprolactone) (PCL) fabricated by electrospinning at different collector rotation speeds (0, 3000 and 6000 rpm) for application as bone tissue scaffolds are reported. SEM, XRD and DSC analyses were used for the morphological characterization of the nanofibers. Scaffolds have a nanofibrous morphology with fibers (majority) having a diameter in the range of 550-350 nm (depending on fiber uptake rates) and an interconnected pore structure. With the increase of collector rotation speed, the nanofibers become more aligned and oriented perpendicular to the axis of rotation. Deposition of fibers at higher fiber collection speeds has a profound effect on the morphology and mechanical properties of individual fibers and also the bulk fibrous meshes. Nanoindentation was used for the measurement of nanoscopic mechanical properties of individual fibers of the scaffolds. The hardness and Young's modulus of aligned fibers measured by nanoindentation decreased with collector rotation speeds. This reveals the difference in the local microscopic structure of the fibers deposited at higher speeds. The sequence of nanoscopic mechanical properties (hardness and modulus) of three fibers is PCL at 0 rpm > PCL at 3000 rpm > PCL at 6000 rpm. This may be explained due to the decrease in crystallinity of fibers at higher uptake rates. However, uni-axial tensile properties of (bulk) scaffolds (tensile strength and modulus) increased with increasing collector rotation speed. The average ultimate tensile strength of scaffolds (along the fiber alignment) increased from 2.21 +/- 0.23 MPa for PCL at uptake rate of zero rpm, to a value of 4.21 +/- 0.35 MPa for PCL at uptake rate of 3000 rpm and finally to 9.58 +/- 0.71 MPa for PCL at 6000 rpm. Similarly, the tensile modulus increased gradually from 6.12 +/- 0.8 MPa for PCL at uptake rate of zero rpm, to 11.93 +/- 1.22 MPa for PCL at uptake rate of 3000 rpm and to 33.20 +/- 1.98 MPa for PCL at 6000 rpm. The sequence of macroscopic mechanical properties (tensile strength and modulus) of three fibers, from highest to lowest, is PCL at 0 rpm < PCL at 3000 rpm < PCL at 6000 rpm. This is attributed to the increased fiber alignment and packing and decrease in inter-fiber pore size at higher uptake rates.

Central mucoepidermoid carcinoma of maxilla with radiographic appearance of mixed radiopaque-radiolucent lesion: a case report

Mucoepidermoid carcinoma is the most common primary malignancy of the salivary glands. Central mucoepidermoid carcinomas are extremely rare in the jaws. Here we report a case of a 19-year-old central mucoepidermoid carcinoma in a young female patient which was asymptomatic throughout her history and which radiographically simulated a fibro-osseous lesion; both features misled the clinical diagnosis. A radiographic picture of mixed radiopaque-radiolucent appearance in central mucoepidermoid carcinoma is extremely rare. The long duration is also uncommon for a malignant lesion. This case report adds a new dimension to the clinical and radiographic picture a central mucoepidermoid carcinoma can reveal.

Resistance of bacterial biofilms to disinfectants: a review

A biofilm can be defined as a community of microorganisms adhering to a surface and surrounded by a complex matrix of extrapolymeric substances. It is now generally accepted that the biofilm growth mode induces microbial resistance to disinfection that can lead to substantial economic and health concerns. Although the precise origin of such resistance remains unclear, different studies have shown that it is a multifactorial process involving the spatial organization of the biofilm. This review will discuss the mechanisms identified as playing a role in biofilm resistance to disinfectants, as well as novel anti-biofilm strategies that have recently been explored.

Comparative biocidal activity of peracetic acid, benzalkonium chloride and ortho-phthalaldehyde on 77 bacterial strains

Despite numerous reports on biocide activities, it is often difficult to have a reliable and relevant overview of bacterial resistance to disinfectants because each work challenges a limited number of strains and tested methods are often different. The aim of this study was to evaluate the bactericidal activity of three different disinfectants commonly used in industrial or medical environments (peracetic acid, benzalkonium chloride and ortho-phthalaldehyde) against 77 bacterial strains from different origins using one standard test method (NF EN 1040). Results highlight the existence of high interspecific variability of resistance to disinfectants and, contrary to widespread belief, Gram-positive strains generally appeared more resistant than Gram-negative strains. Resistance was also variable among strains of the same species such as Bacillus subtilis to peracetic acid, Pseudomonas aeruginosa to benzalkonium chloride and Staphylococcus aureus to ortho-phthalaldehyde.

In the absence of clinically significant graft vs. host disease, myeloablative conditioning may allow an effective graft vs. leukaemia effect

In AML, prevention of GvHD leads to better tolerance of myeloablative therapy. 66 individuals with AML in CR underwent myeloablative conditioning and transplantation with allogeneic PBPC grafts. Median presentation age was 44.5 years. Karyotyping was intermediate in 48% and of unfavourable risk in 36%. For GvHD prophylaxis, PBPC harvests were incubated ex vivo with anti CD52 antibodies. TRM at day 100 and 1 year was 9% and 17%. At a median of 1018 days 65% are alive. Grade >1 GvHD was seen in 11%. GvHD and adverse karyotype were associated with treatment failure. In younger patients preservation of the dose intensity may improve cure rates.

Engineering an antiplatelet adhesion layer on an electrospun scaffold using porcine endothelial progenitor cells

In coronary artery bypass graft interventions, luminal thrombosis is one of the greatest challenges for polymeric grafts with a luminal diameter less than 4 mm. Previously, we reported the fabrication of a highly porous micro/nanofibrous electrospun scaffold and demonstrated the excellent biocompatibility of the scaffolding materials with human endothelial cells. In this study, we explored the engineering of an antithrombotic layer on the scaffold's lumen within 48 h, using peripheral blood-derived porcine endothelial progentior cells (EPC). Flow cytometric results showed that they were CD31(-) but highly CD34(+) and CD105(+) , suggesting the primitive nature of these freshly isolated EPC. The vast majority of EPC readily took up low density lipoprotein, confirming their endothelial phenotype. These EPC also exhibited a strong proliferation capacity on the scaffold for up to 11 days. A confluent layer could be easily engineered within 24 h, which successfully prevented platelet adhesion, a critical step in the cascade of thrombotic events. We concluded that this scaffold could afford a convenient means for the regeneration of a functional cardiovascular endothelium shortly after implantation. © 2011 Wiley Periodicals, Inc. J Biomed Mater Res Part A:, 2011.

Mesenchymal stem cell responses to bone-mimetic electrospun matrices composed of polycaprolactone, collagen I and nanoparticulate hydroxyapatite

The performance of biomaterials designed for bone repair depends, in part, on the ability of the material to support the adhesion and survival of mesenchymal stem cells (MSCs). In this study, a nanofibrous bone-mimicking scaffold was electrospun from a mixture of polycaprolactone (PCL), collagen I, and hydroxyapatite (HA) nanoparticles with a dry weight ratio of 50/30/20 respectively (PCL/col/HA). The cytocompatibility of this tri-component scaffold was compared with three other scaffold formulations: 100% PCL (PCL), 100% collagen I (col), and a bi-component scaffold containing 80% PCL/20% HA (PCL/HA). Scanning electron microscopy, fluorescent live cell imaging, and MTS assays showed that MSCs adhered to the PCL, PCL/HA and PCL/col/HA scaffolds, however more rapid cell spreading and significantly greater cell proliferation was observed for MSCs on the tri-component bone-mimetic scaffolds. In contrast, the col scaffolds did not support cell spreading or survival, possibly due to the low tensile modulus of this material. PCL/col/HA scaffolds adsorbed a substantially greater quantity of the adhesive proteins, fibronectin and vitronectin, than PCL or PCL/HA following in vitro exposure to serum, or placement into rat tibiae, which may have contributed to the favorable cell responses to the tri-component substrates. In addition, cells seeded onto PCL/col/HA scaffolds showed markedly increased levels of phosphorylated FAK, a marker of integrin activation and a signaling molecule known to be important for directing cell survival and osteoblastic differentiation. Collectively these results suggest that electrospun bone-mimetic matrices serve as promising degradable substrates for bone regenerative applications.