Investigation of a passive sensor array for diagnosis of loosening of endoprosthetic implants

Currently, imaging methods are used to diagnose loosening of endoprosthetic implants, but fail to achieve 100% accuracy. In this study, a passive sensor array which is based on the interaction between magnetic oscillators inside the implant and an excitation coil outside the patient was investigated. The excited oscillators produce sound in the audible range, which varies according to the extent of loosening. By performing several experimental tests, the sensor array was optimized to guarantee reproducible and selective excitation of the sound emission. Variation in the distance between the oscillators demonstrated a definite influence on the quality of the generated sound signal. Furthermore, a numerical design analysis using the boundary element method was generated for consideration of the magnetic field and the selectivity of the oscillators during excitation. The numerical simulation of the coil showed the higher selectivity of a coil with a C-shape compared to a cylindrical coil. Based on these investigations, the passive sensor system reveals the potential for detection of implant loosening. Future aims include the further miniaturization of the oscillators and measurements to determine the sensitivity of the proposed sensor system.

bone mineral densities and mechanical properties of retrieved femoral bone samples in relation to bone mineral densities measured in the respective patients

The bone mineral density (BMD) of retrieved cancellous bone samples is compared to the BMD measured in vivo in the respective osteoarthritic patients. Furthermore, mechanical properties, in terms of structural modulus (E(s)) and ultimate compression strength (σ(max)) of the bone samples, are correlated to BMD data. Human femoral heads were retrieved from 13 osteoarthritic patients undergoing total hip replacement. Subsequently, the BMD of each bone sample was analysed using dual energy X-ray absorptiometry (DXA) as well as ashing. Furthermore, BMDs of the proximal femur were analysed preoperatively in the respective patients by DXA. BMDs of the femoral neck and head showed a wide variation, from 1016 ± 166 mg/cm(2) to 1376 ± 404 mg/cm(2). BMDs of the bone samples measured by DXA and ashing yielded values of 315 ± 199 mg/cm(2) and 347 ± 113 mg/cm(3), respectively. E(s) and σ(max) amounted to 232 ± 151 N/mm(2) and 6.4 ± 3.7 N/mm(2). Significant correlation was found between the DXA and ashing data on the bone samples and the DXA data from the patients at the femoral head (r = 0.85 and 0.79, resp.). E(s) correlated significantly with BMD in the patients and bone samples as well as the ashing data (r = 0.79, r = 0.82, and r = 0.8, resp.).

Influence of the distal femoral resection angle on the principal stresses in ceramic total knee components

PURPOSE

A certain failure mode using a newly developed cemented ceramic femoral component in total knee replacement was observed in clinical application, i.e. fracture of the femoral component during intraoperative impaction. This may be caused by unintentional deflection of the saw blades during cutting with consecutive higher resection angle of the distal femur than desired, leading to bending of the femoral component during implantation. A finite-element-analysis was carried out to simulate implantation of the femoral component and to evaluate the influence of distal femur preparation on implant stress.

SCOPE

We developed and validated a numerical model of the ceramic femoral component including a contact formulation which allowed calculating the principal stresses of the implant during implantation onto the resected femur. The analysis considered different anterior and posterior resection angles with a total of 17 variations. By increasing the femoral resection angle in the finite-element-model it could be shown that a deviation of three degrees from the intended resection angle can cause critical stress amounts during implantation.

CONCLUSIONS

When implanting the ceramic component in total knee arthroplasty, the femoral resection angles should be prepared very precisely, in particular anterior saw blade deflection has to be avoided. The implant manufacturer increased implant safety through an additional resection template. Moreover, the impaction of the ceramic femoral component during cementing was not further recommended by using a hammer.

Biomechanical evaluation of different abduction splints for the treatment of congenital hip dysplasia

BACKGROUND

Abduction splints for the treatment of hip dysplasia normally operate on curbing the legs at the hip flexion and abduction. The forces are absorbed in different designs of shoulder straps and thus diverted to the shoulder and the spine. The present study is the first comparing these undesired forces of two spread orthoses and subsequently the transmitted forces to the infant's spine.

METHODS

Between March 2009 and October 2009 the hips of 290 infants were investigated by ultrasound within the first 3 days after birth. Thereof 20 infants with a hip dysplasia Graf type IIc, D or IIIa met our inclusion criteria and were investigated with a Tübinger and a Superior abduction splint. Biomechanical evaluation was performed by using a high-sensitive strain gauge sensor applied to the infant's orthoses between pelvic harness and shoulder straps.

FINDINGS

The transmitted forces to the infant's shoulders correlated significantly with their body mass (P<0.05). Maximal forces on the shoulder of the infants and subsequently transmitted forces on the spine were significantly higher (P<0.05) with the Tübinger splint (range 7.6N to 32.3N; arithmetic mean M: 13.7N) in comparison to the Superior orthosis (range 0.0N to 3.5N; M: 0.7N).

INTERPRETATION

The Superior orthosis works with primary load transmission to the pelvic bone. Using the Tübinger splint the shoulders of the newborn infants are loaded with a maximum of 93.9% of their body mass. This may influence the development of the growing infant's spine.

Relationship between mechanical properties and bone mineral density of human femoral bone retrieved from patients with osteoarthritis

The objective of this study was to analyse retrieved human femoral bone samples using three different test methods, to elucidate the relationship between bone mineral density and mechanical properties. Human femoral heads were retrieved from 22 donors undergoing primary total hip replacement due to hip osteoarthritis and stored for a maximum of 24 hours postoperatively at + 6 °C to 8 °C.Analysis revealed an average structural modulus of 232±130 N/mm(2) and ultimate compression strength of 6.1±3.3 N/mm(2) with high standard deviations. Bone mineral densities of 385±133 mg/cm(2) and 353±172 mg/cm(3) were measured using thedual energy X-ray absorptiometry (DXA) and quantitative computed tomography (QCT), respectively. Ashing resulted in a bone mineral density of 323±97 mg/cm(3). In particular, significant linear correlations were found between DXA and ashing with r = 0.89 (p < 0.01, n = 22) and between structural modulus and ashing with r = 0.76 (p < 0.01, n = 22).Thus, we demonstrated a significant relationship between mechanical properties and bone density. The correlations found can help to determine the mechanical load capacity of individual patients undergoing surgical treatments by means of noninvasive bone density measurements.

The effect of the weight of equipment on muscle activity of the lower extremity in soldiers

Due to their profession and the tasks it entails, soldiers are exposed to high levels of physical activity and strain. This can result in overexertion and pain in the locomotor system, partly caused by carrying items of equipment. The aim of this study was to analyse the extent of muscle activity in the lower extremities caused by carrying specific items of equipment. For this purpose, the activity of selected groups of muscles caused by different items of equipment (helmet, carrying strap, backpack, and rifle) in the upper and lower leg was measured by recording dynamic surface electromyograms. Electrogoniometers were also used to measure the angle of the knee over the entire gait cycle. In addition to measuring muscle activity, the study also aimed to determine out what influence increasing weight load has on the range of motion (ROM) of the knee joint during walking. The activity of recorded muscles of the lower extremity, that is, the tibialis anterior, peroneus longus, gastrocnemius lateralis, gastrocnemius medialis, rectus femoris, and biceps femoris, was found to depend on the weight of the items of equipment. There was no evidence, however, that items of equipment weighing a maximum of 34% of their carrier's body weight had an effect on the ROM of the knee joint.

Influence of cementless hip stems on femoral cortical strain pattern depending on their extent of porous coating

The extent of porous coating of cementless total hip stems is held responsible for radiological periprosthetic changes, the rate of thigh pain, and even its long-term success. However, there is only sparse knowledge on how the biomechanical loading conditions of the femur are influenced by the extent of porous coating in the early phase after implantation of a cementless hip stem. Aiming to evaluate the effect of surface structuring on the strain pattern of the femur, we implanted three anatomic hip stems with different extents of porous coating (full, two-thirds proximal, and penguin type) in second-generation composite femora coated with a photoelastic layer. A cortical strain mapping was conducted before and after insertion of the implants under standardized loading conditions considering relevant muscle forces. The results of the statistical analysis of three different implantation sequences proved that composite femora are suitable for repeated measurements within the applied experimental setup. Cortical strain changes including stress-shielding effects medially (-60%) and laterally (-50%) were validated with a cadaver femur. The extent of porous coating had no significant influence on the surface strain pattern for an immediate postoperative situation.

The Effect of Structural Design on Mechanical Properties and Cellular Response of Additive Manufactured Titanium Scaffolds

Restoration of segmental defects in long bones remains a challenging task in orthopedic surgery. Although autologous bone is still the ‘Gold Standard’ because of its high biocompatibility, it has nevertheless been associated with several disadvantages. Consequently, artificial materials, such as calcium phosphate and titanium, have been considered for the treatment of bone defects. In the present study, the mechanical properties of three different scaffold designs were investigated. The scaffolds were made of titanium alloy (Ti6Al4V), fabricated by means of an additive manufacturing process with defined pore geometry and porosities of approximately 70%. Two scaffolds exhibited rectangular struts, orientated in the direction of loading. The struts for the third scaffold were orientated diagonal to the load direction, and featured a circular cross-section. Material properties were calculated from stress-strain relationships under axial compression testing. In vitro cell testing was undertaken with human osteoblasts on scaffolds fabricated using the same manufacturing process. Although the scaffolds exhibited different strut geometry, the mechanical properties of ultimate compressive strength were similar (145–164 MPa) and in the range of human cortical bone. Test results for elastic modulus revealed values between 3.7 and 6.7 GPa. In vitro testing demonstrated proliferation and spreading of bone cells on the scaffold surface.

[Musculoskeletal modeling of the patellofemoral joint. Dynamic analysis of patellar tracking]

Numerical simulations contribute to the understanding of patellofemoral diseases. Whereas cadaveric studies are limited with respect to reproducibility of results, the impact of different operative approaches can be systematically evaluated based on mathematical models. The objective of this study was to introduce a musculoskeletal model which is capable of describing the dynamic interactions within the patellofemoral joint. It contains major bony and soft tissue structures of the right leg including the medial patellofemoral ligament (MPFL). Two operative approaches were considered based on the model to illustrate the effect on patellofemoral biomechanics during active knee flexion: On the one hand the effect of femoral insertion during MPFL reconstruction on medial soft tissue tension, and on the other hand the difference in patella kinematics before and after total knee arthroplasty. Finally, the potential of musculoskeletal models is discussed.

How stiffness and distal interlocking of revision hip stems influence the femoral cortical strain pattern

BACKGROUND

Stress shielding and nonphysiological load transfer after primary or revision total hip replacement (THR) prepare the ground for resorptive bone remodeling. The quality of the bone stock influences the risk of periprosthetic fractures and the severity of future revision surgeries. The question of whether or not bending stiffness and distal screw interlocking influence load transfer of a modular revision hip stem with a solid, hollow, and hollow-slotted stem extension led to the conception of this experimental study. The results were compared with a standard hip stem for primary THR.

METHODS

Revision stems were implanted in photoelastically coated composite femora. Cortical strain mapping was conducted before and after insertion of the implants under standardized loading conditions, considering the relevant muscle forces. Statistical analysis was based on a 95% confidence interval and a variance analysis for repeated measurements.

RESULTS

Significant stress shielding was observed after insertion of all types of hip stems compared with the intact femora. There was also a marked difference between strain alterations induced by standard and revision hip stems. With revision stems, the most distinct stress shielding effects were registered with the solid stem extension, particularly in the femoral diaphysis. Distal interlocking screws only had a local action on strain pattern and tended to enhance stress shielding at the midstem area when using the more flexible components.

CONCLUSION

More flexible revision stems provide a cortical strain pattern of the femur closer to the preoperative status. This may reduce resorptive bone remodeling in the long term. However, any type of revision stem tested in this study caused higher stress shielding than the hip stem for primary THR, especially in the diaphyseal region medially and laterally. With sufficient proximal anchorage, the influence of distal interlocking screws on the femoral strain pattern was localized.

Ceramic femoral components in total knee arthroplasty - two year follow-up results of an international prospective multi-centre study

Background:

Total knee arthroplasty can be considered as a reliable surgical procedure with a good long-term clinical result. However, implant failure due to particle induced aseptic loosening as well as the aspect of hypersensitivity to metal ions still remains an emerging issue.

Methods:

The purpose of this prospective international multi-centre study was to evaluate the clinical and radiological outcomes and the reliability of the unconstrained Multigen Plus Total Knee System with a new BIOLOX® delta ceramic femoral component. Cemented total knee arthroplasty was performed on 108 patients (110 knees) at seven hospitals in three countries. Clinical and radiological evaluations were performed preoperatively, and after 3, 12 and 24 months postoperatively using the HSS-, WOMAC-, SF-36-score and standardised X-rays.

Results:

The mean preoperative HSS-Score amounted to 55.5 ± 11.5 points and improved significantly in all postoperative evaluations (85.7 ± 11.7 points at 24 months). Furthermore, improvements in WOMAC- and SF-36-score were evaluated as significant at all points of evaluation. Radiolucent lines around the femoral ceramic component at 24 months were found in four cases. Progression of radiolucent lines was not seen and no implant loosening was observed. During the 24 month follow-up eight patients underwent subsequent surgery due to reasons unrelated to the implant material.

Conclusions:

The observed clinical and radiological results are encouraging for a long-term survival of the ceramic femoral component. Therefore, ceramic implants could be a promising solution not only for patients with allergies against metallic implant materials, but also for the osteoarthritic knee joint. Long-term follow-up is necessary to draw conclusions regarding the superiority of the ceramic knee implants concerning in vivo wear and long-term survivorship.

Comparison of cross-sections of different femoral components for revision total knee replacement

PURPOSE. To compare the inner contour of the femoral component of 10 total knee replacement (TKR) designs for possible exchange in use.

METHODS

Inner contours of the femoral components of 10 cemented, cruciate-retaining TKR designs (e.motion, Genesis, Genia, Innex, LCS, Multigen Plus, NexGen, PFC, Scorpio, Vanguard) were scanned and reconstructed to 2-dimensional contours. Their cross-sections were compared by superimposition and aligning at the distal and anterior cuts. The patellar notch and outer contour were not analysed.

RESULTS

The maximum deviation was 5 mm in the posterior and posterior oblique cuts and 10 mm in the anterior oblique cut. Based on similarity of the inner contour, LCS and Innex was classified as group I, e.motion, Genesis, Scorpio, Vanguard, and Multigen Plus as group II, and Genia, NexGen, and PFC as group III. All 2 designs in group I were not compatible with the other 8 designs. Four of the 5 designs in group II showed good compatibility. All 3 designs in group III significantly differed in the posterior and oblique cuts.

CONCLUSION

A standardised inner contour of the femoral component can increase compatibility of different TKR systems in revision surgery and reduces the extent of bone resection.

Adenoviral transduction supports matrix expression of alginate cultured articular chondrocytes

The present study examines the effects of adenoviral (Ad) transduction of human primary chondrocyte on transgene expression and matrix production. Primary chondrocytes were isolated from healthy articular cartilage and from cartilage with mild osteoarthritis (OA), transduced with an Ad vector and either immediately cultured in alginate or expanded in monolayer before alginate culture. Proteoglycan production was measured using dimethylmethylene blue (DMMB) assay and matrix gene expression was quantified by real-time PCR. Viral infection of primary chondrocytes results in a stable long time transgene expression for up to 13 weeks. Ad transduction does not significantly alter gene expression and matrix production if chondrocytes are immediately embedded in alginate. However, if expanded prior to three dimension (3D) culture in alginate, chondrocytes produce not only more proteoglycans compared to non-transduced controls, but also display an increased anabolic and decreased catabolic activity compared to non-transduced controls. We therefore suggest that successful autologous chondrocyte transplantation (ACT) should combine adenoviral transduction of primary chondrocytes with expansion in monolayer followed by 3D culture. Future studies will be needed to investigate whether the subsequent matrix production can be further improved by using Ad vectors bearing genes encoding matrix proteins.

[Cementless total hip arthroplasty: a review]

The purpose of total hip replacement (THR) is the restoration of a painless functioning hip joint with the main focus on the biomechanical properties. Advances in surgical techniques and biomaterial properties currently allow predictable surgical results in most patients. Despite the overwhelming success of this surgical procedure, the debate continues surrounding the optimal choice of implants and fixation. Femoral and acetabular implants with varying geometries and fixation methods are currently available. Problems inherent with acrylic bone cement, however, have encouraged surgeons to use alternative surfaces to allow biologic fixation. Optimal primary and secondary fixation of cementless hip stems is a precondition for long-term stability. Important criteria to achieve primary stability are good rotational and axial stability by press-fit fixation. The objective of the cementless secondary fixation is the biological integration of the implant by bony ingrowth. Nevertheless, current investigations show excellent results of cementless fixation even in older patients with reduced osseous quality. The main advantages of cementless fixation include biological integration, reduced duration of surgery, no tissue damage by cement polymerization and reduction of intraoperative embolisms. In comparison to cemented THR both, cementless sockets and stems provide good long-term results.

Metal hypersensitivity in total knee arthroplasty: revision surgery using a ceramic femoral component - a case report

We present a case involving the revision of a total knee arthroplasty with a metal femoral component using a ceramic implant due to metal hypersensitivity. A 58-year-old female patient underwent total knee arthroplasty (TKA) with a standard metal bicondylar knee system. She suffered from persistent pain and strong limitations in her range of motion (ROM) associated with flexion during the early postoperative period. Arthroscopic arthrolysis of the knee joint and intensive active and passive physical treatment, in combination with a cortisone regime, temporarily increased the ROM and reduced pain. No signs of low grade infection or other causes of implant failure were evident. Histology of synovial tissue revealed lymphoplasmacellular fibrinous tissue, consistent with a type IV allergic reaction. Allergometry (skin reaction) revealed type IV hypersensitivity against nickel-II-sulfate and palladium chloride. Revision surgery of the metal components was performed with a cemented ceramic femoral component (same bicondylar design) and a cemented titanium alloy tibial component. Postoperative evaluations were performed 10days, and 3 and 12months after the revision surgery. There was an increased ROM in flexion to 90° at the 12month follow-up. No swelling or effusion was observed at all clinical examinations after the revision surgery. No pain at rest and moderate walking pain were evident. The presented case demonstrates that ceramic implants are a promising solution for patients suffering from hypersensitivity to metal ions in total knee arthroplasty.

HiL simulation in biomechanics: a new approach for testing total joint replacements

Instability of artificial joints is still one of the most prevalent reasons for revision surgery caused by various influencing factors. In order to investigate instability mechanisms such as dislocation under reproducible, physiologically realistic boundary conditions, a novel test approach is introduced by means of a hardware-in-the-loop (HiL) simulation involving a highly flexible mechatronic test system. In this work, the underlying concept and implementation of all required units is presented enabling comparable investigations of different total hip and knee replacements, respectively. The HiL joint simulator consists of two units: a physical setup composed of a six-axes industrial robot and a numerical multibody model running in real-time. Within the multibody model, the anatomical environment of the considered joint is represented such that the soft tissue response is accounted for during an instability event. Hence, the robot loads and moves the real implant components according to the information provided by the multibody model while transferring back the position and resisting moment recorded. Functionality of the simulator is proved by testing the underlying control principles, and verified by reproducing the dislocation process of a standard total hip replacement. HiL simulations provide a new biomechanical testing tool for analyzing different joint replacement systems with respect to their instability behavior under realistic movements and physiological load conditions.

Evaluation of antimicrobial effects of novel implant materials by testing the prevention of biofilm formation using a simple small scale medium-throughput growth inhibition assay

Staphylococcal colonization of implants is a serious complication of orthopaedic surgery. Anti-infectious modification of implant surfaces may serve to prevent bacterial colonization. The authors set out to develop an in vitro test system for the analysis of prevention of biofilm formation by Staphylococcus epidermidis and Staphylococcus aureus on implant materials. Biofilm growth was monitored over 10 days on titanium disks in order to develop appropriate test parameters. Bacterial cell counts following ultrasonic treatment of the colonized samples were compared with scanning electron microscope images of the specimens. Copper ion containing surfaces (ie copper [Cu] and inter-metallic Ti-Cu films) were used for growth inhibition assays: copper ion releasing specimens led to reduced bacterial numbers in biofilms and decreased bacterial persistence in the model used. The assay used represents an inexpensive and quick in vitro screen for the antibacterial effects of novel implant surface materials.

Titanium-copper-nitride coated spacers for two-stage revision of infected total hip endoprostheses

Within the first two years after total hip arthroplasty implant-associated infection has become the second most common reason for a revision surgery. Two-stage implant exchange is frequently conducted using temporary spacers made of antibiotic-loaded cement in order to prevent a bacterial colonization on the spacer. Avoiding several disadvantages of cement spacers, a conventional hemi-endoprosthesis was equipped with a copper-containing implant coating for inhibition of bacterial biofilms. In the present paper details of this novel treatment concept are presented including a case report.

Two-stage revision of implant-associated infections after total hip and knee arthroplasty

Septic loosening of total hip and knee endoprostheses gains an increasing proportion of revision arthroplasties. Operative revisions of infected endoprostheses are mentally and physically wearing for the patient, challenging for the surgeon and a significant economic burden for healthcare systems. In cases of early infection within the first three weeks after implantation a one-stage revision with leaving the implant in place is widely accepted. The recommendations for the management of late infections vary by far. One-stage revisions as well as two-stage or multiple revision schedules have been reported to be successful in over 90% of all cases for certain patient collectives. But implant associated infection still remains a severe complication. Moreover, the management of late endoprosthetic infection requires specific logistics, sufficient and standardized treatment protocol, qualified manpower as well as an efficient quality management. With regard to the literature and experience of specialized orthopaedic surgeons from several university and regional hospitals we modified a commonly used treatment protocol for two-stage revision of infected total hip and knee endoprostheses. In addition to the achievement of maximum survival rate of the revision implants an optimisation of the functional outcome of the affected artificial joint is aimed for.

[Biphosphonate-induced femoral stress fractures : A new problem and knowledge so far - case report]

During the last several years the treatment of osteoporosis with bisphosphonates has become accepted as a safe and effective procedure. However, recently there have been increasing numbers of reports of rare complications in the literature. Particularly the occurrence of atypical fractures of the femur has become a focus of interest but the problem is insufficiently known and only rarely addressed in the scientific discussion. The case illustrated here and a survey of the important facts in the recent literature highlight essential aspects of long-term bisphosphonate therapy.

A Novel Sensor Concept for Optimization of Loosening Diagnostics in Total Hip Replacement

The main reason for the revision of total hip replacements is aseptic loosening, caused by stress shielding and wear particle induced osteolysis. In order to detect an implant loosening early, the osseointegration of endoprosthetic implants must be measured exactly. Currently applied diagnostic methods, such as standard radiographs and clinical symptomatology, often result in an imprecise diagnosis. A novel radiation-free method to improve the diagnostic investigation of implant loosening is presented. The osseointegration of an implant can be identified using mechanical magnetic sensors (oscillators), which impinge on small membranes inside an implant component, e.g., the femoral hip stem. The maximum velocity after impingement of the oscillator depends on the osseointegration of the implant. Excitation of the oscillator is realized by a coil outside the human body. Another external coil is used to detect the velocity of the oscillator. To demonstrate the principle of the novel loosening sensor, an overdimensioned test device was designed to measure simulated loosening phases in the first experimental tests with different material layers. The overdimensioned test device of the loosening sensor showed significant differences in the various phases of fixation. Analysis of the membrane without any material layer in the case of advanced loosening resulted in a 23% higher maximum velocity compared to an attached artificial bone layer. Based on these preliminary results, the sensor system shows potential for the detection of implant loosening. Moreover, the proposed system could be used in experimental applications to determine the quality of bioactive coatings and new implant materials.

Comparative Study of Clinical and Radiological Outcomes of Unconstrained Bicondylar Total Knee Endoprostheses with Anti-allergic Coating

Background:

Hypersensitivity reactions to implant materials have become more important in total knee replacement (TKR). The purpose of this retrospective comparative study was to evaluate the clinical and radiological outcomes of unconstrained bicondylar total knee prostheses with and without anti-allergic titanium(niobium)nitrite (Ti(Nb)N) coating.

Methods:

Twenty-four patients (25 TKRs) underwent a preoperative clinical evaluation and then a postoperative evaluation after 26.2 months in the allergy group treated with coated implants (n=13 implants) and after 24.5 months in the control group treated with uncoated implants but identical geometry (n=12) using HSS, WOMAC and SF-36 scores. Radiological evaluations were performed using standard anterior-posterior (a.p.) and lateral X-rays.

Results:

During follow-up two patients of the allergy group had to undergo revision surgery due to non-implant-related reasons. A comparative analysis of both study groups showed a significant difference in the HSS scores at both evaluation time points (MW test p≤0.050); these findings are remarkable since the control group had a significantly lower score preoperatively (54.0 vs 65.0 points) and a significantly higher score (82.5 vs 75.0 points) postoperatively. The preoperative and postoperative WOMAC and SF-36 scores were comparable in both groups (MW test p≥0.052), although the postoperative increase in the score for the allergy group was lower. The radiological results were comparable in both groups and were unlikely to influence the results.

Conclusions:

This clinical study demonstrates the restricted outcome in postoperative function and quality of life in the allergy group compared to the control group.

Oxygen consumption, acidification and migration capacity of human primary osteoblasts within a three-dimensional tantalum scaffold

A major clinical problem within synthetic, large-scaled scaffolds is the insufficient nutrient supply resulting in inhomogeneous cell proliferation and differentiation. The aim of this study was to analyse pH value, oxygen consumption and migration of human osteoblasts within a 3D tantalum scaffold, clinically used for larger bone defects. After 24 h the oxygen concentration within the scaffold decreased significantly and remained low during incubation. Monitoring of the pH value inside the tantalum scaffold showed a slightly acidification under static culture conditions. However, cell migration within the 3D scaffold was detected. Hence, in clinical application it can be assumed that porous tantalum scaffolds can be settled by osteoblasts under critical oxygen and nutrient supply. In general, monitoring of cell migration, oxygen consumption and acidification can be a suitable instrument for creating advanced 3D bone scaffolds.

The influence in airforce soldiers through wearing certain types of army-issue footwear on muscle activity in the lower extremities

The objective of the study was to analyse the influence of the shape and material of the military footwear worn by soldiers on muscle activity in the lower extremities, and whether such footwear could explain specific strain complaints and traumatic lesions in the region of the lower extremities.

37 soldiers (one woman, 36 men) aged between 20 and 53 years underwent a dynamic electromyography (EMG) analysis. Wearing – one pair at a time - five different types of shoes, the subjects were asked to walk on a treadmill, where an EMG of the following muscles was taken: M. tibialis anterior, M. gastrocnemius mediales, M. gastrocnemius laterales, M. peroneus longus and M. rectus femoris.

When the subjects wore old-fashioned outdoor jogging shoes increased muscle activity was observed in the region of the M. peroneus longus. This can be interpreted as a sign of the upper ankle joint requiring increased support and thus explain the higher susceptibility to sprains experienced in connection with these shoes. When the subjects wore combat boots, increased activity was observed in the region of the Mm. tibialis anterior and rectus femoris. The specific activity differences that were observed in particular muscles may have influence in the occurrence of certain disorders, especially in untrained recruits. This can be linked to various strain-related disorders such as shin splints and patellofemoral pain. The data obtained using EMG can provide information about the likelihood of a clustering of the complaints experienced by soldiers during training or active service.

Differentiation capacity of human chondrocytes embedded in alginate matrix

Healing capacity of cartilage is low. Thus, cartilage defects do not regenerate as hyaline but mostly as fibrous cartilage which is a major drawback since this tissue is not well adapted to the mechanical loading within the joint. During in vitro cultivation in monolayers, chondrocytes proliferate and de-differentiate to fibroblasts. In three-dimensional cell cultures, de-differentiated chondrocytes could re-differentiate toward the chondrogenic lineage and re-express the chondrogenic phenotype. The objective of this study was to characterize the mesenchymal stem cell (MSC) potential of human chondrocytes isolated from articular cartilage. Furthermore, the differentiation capacity of human chondrocytes in three-dimensional cell cultures was analyzed to target differentiation direction into hyaline cartilage. After isolation and cultivation of chondrogenic cells, the expression of the MSC-associated markers: cluster of differentiation (CD)166, CD44, CD105, and CD29 was performed by flow cytometry. The differentiation capacity of human chondrocytes was analyzed in alginate matrix cultured in Dulbecco?s modified eagle medium with (chondrogenic stimulation) and without (control) chondrogenic growth factors. Additionally, the expression of collagen type II, aggrecan, and glycosaminoglycans was determined. Cultivated chondrocytes showed an enhanced expression of the MSC-associated markers with increasing passages. After chondrogenic stimulation in alginate matrix, the chondrocytes revealed a significant increase of cell number compared with unstimulated cells. Further, a higher synthesis rate of glycosaminoglycans and a positive collagen type II and aggrecan immunostaining was detected in stimulated alginate beads. Human chondrocytes showed plasticity whilst cells were encapsulated in alginate and stimulated by growth factors. Stimulated cells demonstrated characteristics of chondrogenic re-differentiation due to collagen type II and aggrecan synthesis.

Migration Capacity and Viability of Human Primary Osteoblasts in Synthetic Three-dimensional Bone Scaffolds Made of Tricalciumphosphate

In current therapeutic strategies, bone defects are filled up by bone auto- or allografts. Since they are limited by insufficient availability and donor site morbidity, it is necessary to find an appropriate alternative of synthetic porous bone materials. Because of their osteoconductive characteristics, ceramic materials like tricalciumphosphate (TCP) are suitable to fill up bone defects. Another advantage of TCP implants is the ability of patient-specific engineering. Objective of the present in-vitro study was to analyze the migration capacity and viability of human primary osteoblasts in porous three-dimensional TCP scaffolds in a static cell culture. To obtain data of the cellular supply with nutrients and oxygen, we determined the oxygen concentration and the pH value within the 3D scaffold compared to the surrounding medium using microsensors. After eight days of cultivation we found cells on all four planes. During incubation, the oxygen concentration within the scaffold decreased by approximately 8%. Furthermore, we could not demonstrate an increasing acidification in the core of the TCP scaffold. Our results suggest that osteoblasts could migrate and survive within the macroporous TCP scaffolds. The selected size of the macropores prevents overgrowth of cells, whereby the oxygen and nutrients supply is sufficiently guaranteed.

An extended spectrum bactericidal titanium dioxide (TiO2) coating for metallic implants: in vitro effectiveness against MRSA and mechanical properties

Implant infections remain feared and severe complications after total joint arthroplasty. The incidence of multi-resistant pathogens, causing such infections, is rising continuously, and orthopaedic surgeons are confronted with an ever-changing resistance pattern. Anti-infectious surface coatings aim for a high local effective concentration and a low systemic toxicity at the same time. Antibacterial efficacy and biomechanical stability of a novel broad-spectrum anti-infectious coating is assessed in the present study. Antibacterial efficacy of a sol-gel derived titanium dioxide (TiO(2)) coating for metal implants with and without integrated copper ions as antibiotic agent was assessed against methicillin resistant Staphylococcus aureus (MRSA 27065). Both bacterial surface adhesion and growth of planktonic bacteria were assessed with bare and various TiO(2)-coated Ti6Al4V metal discs. Furthermore, bonding strength of the TiO(2) surface coating, using standard testing procedures, as well as surface roughness were determined. We found a significant reduction of the bacterial growth rate for the coatings with integrated copper ions, with highest reduction rates observed for a fourfold copper TiO(2)-coating. Pure TiO(2) without integrated copper ions did not reduce bacterial growth compared to uncoated Ti6Al4V. The coating was not detached from the substrate by standard adhesive failure testing, which indicated an excellent durability of the implant coating. The TiO(2) coating with integrated copper ions could offer a new strategy for preventing implant-associated infections, with antibacterial properties not only against the most common bacteria causing implant infections but also against multiresistant strains such as MRSA.

Intraoperative impaction of total knee replacements: an explicit finite-element-analysis of principal stresses in ceramic vs. cobalt-chromium femoral components

BACKGROUND

In connection with technological advances in the manufacturing of medical ceramics, a newly developed ceramic femoral component was introduced in total knee arthroplasty. We generated an explicit finite-element-model to calculate the stresses developed under the highly dynamic intraoperative impaction with regard to cobalt-chromium and ceramic implant material as well as application of a silicone cover in order to reduce stress.

METHODS

The impaction was calculated with the hammer hitting the backside of the impactor at previously measured initial velocities. Subsequently the impactor, consisting of a steel handhold and a polyoxymethylene head, hit the femoral component. Instead of modelling femoral bone, the implant was mounted on four spring elements with spring constants previously determined in an experimental impaction model. The maximum principal stresses in the implants were evaluated at 8000 increments during the first 4 ms of impact.

FINDINGS

The ceramic implant showed principal stresses 10% to 48% higher than the cobalt chromium femoral component. The simulation of a 5mm thick silicone layer between the impactor and the femoral component showed a strong decrease of vibration resulting in a reduction of 54% to 68% of the maximum stress amounts. The calculated amounts of principal stress were beneath the ultimate bending strengths of each material.

INTERPRETATION

Based on the results, intraoperative fracture of femoral components in total knee replacement may not be caused solely by impaction, but also by contributing geometrical factors such as inadequate preparation of the distal femur. In order to minimize the influence of impaction related stress peaks we recommend limiting the velocity as well as the weight of the impaction hammer when inserting femoral components. The silicone cover seems to deliver a strong decrease of implant stress and should be considered in surgery technique in the future.

Impact of preoperative variables on the functional and radiological outcome of an uncemented femoral stem: a prospective two-year follow-up

The demand for improved clinical outcomes in total hip arthroplasty (THA) has led to improvements in fixation, bone ingrowth and designs providing an increased range of motion.The purpose of this prospective clinical study was to evaluate the outcome of a new cementless stem (Hipstar). The variables of body mass index (BMI), gender, preoperative function and age were explored as predictors for recovery after surgery. Clinical and radiological evaluation of 100 patients were undertaken preoperatively and at 6, 12 and 24 months postoperatively using the Harris Hip Score (HHS), WOMAC-Score and the SF-36-Score. The mean preoperative HHS was 53.6 + or - 14.5 points and it increased significantly to 82.8 + or - 15.4 at the postoperative evaluation at 24 months (WI-test p<0.001). Diminished preoperative function led to a lower postoperative score, but BMI, age and gender were not predictors of clinical and radiological outcome. Due to stress-shielding the straight Hipstar stem revealed radiolucent lines of between 41.5% and 68.5% in the proximal Gruen zones, which indicates a higher primary and secondary stability by enhanced osseous integration compared to other straight stems. Our clinical results are encouraging, but long-term follow-up will be necessary to confirm the successful introduction of the new Hipstar stem.

Infections after primary and revision total hip replacement caused by enterobacteria producing extended spectrum beta-lactamases (ESBL): a case series

Implant infection remains a feared complication after total hip replacement. A higher rate of infection is observed after revision surgery. An additional threat for such patients arises from the fact that bacteria resistant to a multitude of antibiotics are encountered with increasing frequency in the hospital setting. Among them enterobacteria producing extended spectrum beta-lactamases (ESBL) are the second most frequent group of multiresistant isolates. ESBLs are enzymes which hydrolyse third and fourth generation cephalosporins resulting in a distinctive resistance against these antibiotics. Even though ESBLs were first described in the early 1980's and now represent pathogens of importance in intensive care units, they have been only rarely encountered in orthopaedic and trauma surgery. We report on three cases of ESBL-associated infections in hip arthroplasty, resulting in 1) resolution of infection after removal of the hip implant, 2) death after developing a nosocomial pulmonary infection due to ESBL-producing bacteria, and 3) resolution of infection after two-stage revision. The infections, caused by multi-resistant ESBL-producing Escherichia coli and Klebsiella pneumoniae isolates, demonstrate the difficulties in managing implant associated infections with resistant bacteria, and emphasize the importance of recognizing ESBL-positive bacteria as increasingly important pathogens that require special precautions and treatment. Our observations suggest that ESBL-expressing bacteria in orthopaedic and trauma surgery are not a rare phenomenon any more.