Self-assembled polyhydroxy fatty acids vesicles: a mechanism for plant cutin synthesis

Despite its biological importance, the mechanism of formation of cutin, the polymeric matrix of plant cuticles, has not yet been fully clarified. Here, for the first time, we show the participation in the process of lipid vesicles formed by the self-assembly of endogenous polyhydroxy fatty acids. The accumulation and fusion of these vesicles (cutinsomes) at the outer part of epidermal cell wall is proposed as the mechanism for early cuticle formation.

Partial demethylation of oligogalacturonides by pectin methyl esterase 1 is required for eliciting defence responses in wild strawberry (Fragaria vesca)

In addition to the role of the cell wall as a physical barrier against pathogens, some of its constituents, such as pectin-derived oligogalacturonides (OGA), are essential components for elicitation of defence responses. To investigate how modifications of pectin alter defence responses, we expressed the fruit-specific Fragaria x ananassa pectin methyl esterase FaPE1 in the wild strawberry Fragaria vesca. Pectin from transgenic ripe fruits differed from the wild-type with regard to the degree and pattern of methyl esterification, as well as the average size of pectin polymers. Purified oligogalacturonides from the transgenic fruits showed a reduced degree of esterification compared to oligogalacturonides from wild-type fruits. This reduced esterification is necessary to elicit defence responses in strawberry. The transgenic F. vesca lines had constitutively activated pathogen defence responses, resulting in higher resistance to the necrotropic fungus Botrytis cinerea. Further studies in F. vesca and Nicotiana benthamiana leaves showed that the elicitation capacity of the oligogalacturonides is more specific than previously envisaged.

Cardiopulmonary adaptation in large for gestational age infants of diabetic and nondiabetic mothers

AIM

To compare cardiopulmonary adaptation in large for gestational age infants of diabetic and nondiabetic mothers.

METHODS

Color Doppler echocardiography was performed in 113 (22 large for gestational age infants of diabetic mothers, 21 of nondiabetic mothers and 70 adequate for gestational age newborns) full-term infants.

RESULTS

Pulmonary arterial pressure was significantly higher in infants of diabetic mothers than in those of nondiabetic mothers and normal infants at 24 h (38.5 vs. 32.5, and 35.5 mmHg, respectively). However, slow fall in this parameter was shown in all large for gestational age infants. Open ductus arteriosus was frequent in all large for gestational age infants, but its closure was significantly delayed in infants of diabetic mothers. Septal hypertrophy was higher in infants of diabetic mothers than in large for gestational age infants of nondiabetic mothers.

CONCLUSION

Large for gestational age infants born from nondiabetic mothers showed delayed fall in pulmonary arterial pressure similar to those born from diabetic mothers but showed lower proportion of septal hypertrophy. Patent ductus arteriosus persisted for longer period of time in all large for gestational age infants than in normal infants, but its closure was significantly delayed in infants of diabetic mothers.

Isolation, characterization, and localization of AgaSGNH cDNA: a new SGNH-motif plant hydrolase specific to Agave americana L. leaf epidermis

GDSL and SGNH hydrolases are lipases involved in a wide range of functions, behaving in many cases as bifunctional enzymes. In this work, the isolation and characterization of AgaSGNH, a cDNA encoding a member of the SGNH-hydrolase superfamily from young leaf epidermis of the monocot Agave americana L., is reported. The protein possesses a typical signal peptide at its N-terminus that allows its secretion to the epidermis cell wall, as verified by immunolocalization experiments. In addition, the AgaSGNH sequence contains a His-Leu-Gly-Ala-Glu (HLGAE) motif which is similar to that observed in other plant acyltransferases. Expression levels by northern blot and in situ localization of the corresponding mRNA, as well as the immunolocalization of the protein in Agave young leaves indicate that the protein is specifically present in the epidermal cells. The detailed study performed in different parts of the Agave leaf confirms two aspects: first, the expression of AgaSGNH is limited to the epidermis, and second, the maximum mRNA levels are found in the epidermis of the youngest zones of the leaf which are especially active in cutin biosynthesis. These levels dramatically decrease in the oldest zone of the leaf, where the presence of AgaSGNH mRNA is undetectable, and the biosynthesis of different cuticle components is severely reduced. These data could be compatible with the hypothesis that AgaSGNH could carry out both the hydrolysis and the transfer, from an activated acyl-CoA to a crescent cutin in Agave americana leaves and, therefore, be involved in the still unknown mechanism of plant cutin biosynthesis.

Biomechanics of isolated tomato (Solanum lycopersicum L.) fruit cuticles: the role of the cutin matrix and polysaccharides

The mechanical characteristics of the cuticular membrane (CM), a complex composite biopolymer basically composed of a cutin matrix, waxes, and hydrolysable polysaccharides, have been described previously. The biomechanical behaviour and quantitative contribution of cutin and polysaccharides have been investigated here using as experimental material mature green and red ripe tomato fruits. Treatment of isolated CM with anhydrous hydrogen fluoride in pyridine allowed the selective elimination of polysaccharides attached to or incrusted into the cutin matrix. Cutin samples showed a drastic decrease in elastic modulus and stiffness (up to 92%) compared with CM, which clearly indicates that polysaccharides incorporated into the cutin matrix are responsible for the elastic modulus, stiffness, and the linear elastic behaviour of the whole cuticle. Reciprocally, the viscoelastic behaviour of CM (low elastic modulus and high strain values) can be assigned to the cutin. These results applied both to mature green and red ripe CM. Cutin elastic modulus, independently of the degree of temperature and hydration, was always significantly higher for the ripe than for the green samples while strain was lower; the amount of phenolics in the cutin network are the main candidates to explain the increased rigidity from mature green to red ripe cutin. The polysaccharide families isolated from CM were pectin, hemicellulose, and cellulose, the main polymers associated with the plant cell wall. The three types of polysaccharides were present in similar amounts in CM from mature green and red ripe tomatoes. Physical techniques such as X-ray diffraction and Raman spectroscopy indicated that the polysaccharide fibres were mainly randomly oriented. A tomato fruit CM scenario at the supramolecular level that could explain the observed CM biomechanical properties is presented and discussed.

In vitro differentiation of human dental follicle cells with dexamethasone and insulin

The dental follicle is an ectomesenchymally derived connective tissue harboring precursor cells for the tooth supporting apparatus. In this study, we examined gene expression of freshly isolated human dental follicle cells during osteogenic differentiation in vitro. These plastic adherent fibroblastic cells express Notch-1, nestin and vimentin. We differentiated dental follicle cells with dexamethasone or insulin-based protocols into membrane-like structures containing mineralizing foci. An analysis of mineralized tissue with atomic force microscopy illustrated a bone and cementum-like structure. A real-time RT-PCR analysis was developed to investigate expression of typical osteoblast or cementoblast related genes during differentiation. Gene expressions of osteocalcin (OCN), bone morphogenic protein (BMP)-2 and nestin were increased during the both differentiation approaches. Our work demonstrates differentiation of dental follicle cells with an insulin-based protocol for the first time.

Basis of selectivity of cyhalofop-butyl in Oryza sativa L

Cyhalofop-butyl (CB), 2-[4-(4-cyano-2-fluorophenoxy)phenoxy]propanoic acid, butyl ester (R), is an aryloxyphenoxypropionate (AOPP) herbicide for postemergence use in rice to control grasses, mainly Echinochloa spp. Similar to other AOPP and cyclohexanedione herbicides, the site of action of CB is acetyl-coenzyme A carboxylase (ACCase), an enzyme in fatty acid biosynthesis. The mechanisms involved in the selectivity of CB in rice (Oryza sativa L.)-absorption, translocation, metabolism, and ACCase susceptibility-were studied. Studies of in vitro inhibition of ACCase in E. oryzoides and O. sativa L. species discounted any differential active site sensitivity as the basis of tolerance to CB. The O. sativa L. cuticle was uniformly covered by waxes, with predominantly unshaped large waxes randomly distributed, obtaining absorption values of under 30%, 24 h after application (HAA). The E. oryzoides cuticle formed a non-uniform covered reticule, with less wax density and areas lacking in waxes reaching maximum values of absorption rising to 73%, 24 HAA. Translocation studies revealed no significant differences, either between species, or between times, remaining in the treated leaf. There was a good correlation between the rate of metabolism and plant tolerance. Plant metabolism studies demonstrated that tolerant rice inactivated the esterases producing a lack of functionality thus reducing the conversion of CB to cyhalofop acid, which is the active form of the herbicide. Moreover, it increased the metabolism of the herbicide forming non toxic metabolites much faster than E. oryzoides. It was concluded that the basis of rice tolerance to CB was a lack of esterase functionality, a reduced absorption through the cuticle and an increase in cyhalofop acid metabolism.

Isolation and characterization of a cDNA encoding a membrane bound acyl-CoA binding protein from Agave americana L. epidermis

A cDNA encoding an acyl-CoA binding protein (ACBP) homologue has been cloned from a cDNA library made from mRNA isolated from epidermis of young leaves of Agave americana L. The derived amino acid sequence reveals a protein corresponding to the membrane-associated form of ACBPs only previously described in Arabidopsis and rice. Northern blot analysis showed that the A. americana ACBP gene is mainly expressed in the epidermis of mature zone of the leaves. The epidermis of A. americana leaves have a well developed cuticle with the highest amounts of the cuticular components waxes, cutin and cutan suggesting a potential role of the protein in cuticle formation.

Influence of seed size and seed nature on recruitment in the polymorphic harvester ant Messor barbarus

In the polymorphic harvester ant Messor barbarus, the colony modulates response during foraging according to seed characteristics. The easiness of picking up small seeds (oat fragments or canary seeds) shortens the time lapse between food discovery and the return of scouts to the nest, favouring the onset of recruitment and higher mobilisation rates than bigger seeds (whole oat). However, size is not the only criterion, as canary seeds are preferred among small ones. A modulation of the trail laid by the first scouts also plays a role in the shaping of harvesting patterns and in the enhancement of recruitment towards small and/or preferred seed. This flexibility extends to the relative participation of the three worker sizes classes, which differs according to seed. Media are the most numerous at the foraging arena and largely responsible for trail-laying. Minor participate in seed harvesting and trail-laying, mostly when they can be efficient in carrying seeds, such as oat fragments. Major scarcely participate in harvesting and trail-laying, but are involved in the exploitation of bigger and/or preferred seed species. When faced with different seed species, M. barbarus seems thus to collectively adopt a "foraging time minimisation" rather than an "energetic gain per item harvested maximisation" strategy. Dynamics of foraging and division of labour between foragers of different sizes are related to both the workers' ability to carry seed items, and the transfer of information to nestmates by trail-laying, all parameters that vary according to seed characteristics.

Functional results after a Krukenberg amputation

This case report presents a 51 year old female patient who had a train accident in 1999. She suffered bilateral trans-tibial and bilateral trans-radial amputations. In this paper, the evolution of the right transradial amputation where eventually a Krukenberg procedure was performed, is described as is its good functional outcome after rehabilitation treatment. After this first procedure the patient also asked for the Krukenberg procedure for her left arm.

Lolium rigidum, a pool of resistance mechanisms to ACCase inhibitor herbicides

Three diclofop-methyl (DM) resistant biotypes of Lolium rigidum (R1, R2, and R3) were found in different winter wheat fields in Spain, continuously treated with DM, DM + chlortoluron, or DM + isoproturon. Herbicide rates that inhibited shoot growth by 50% (ED50) were determined for DM. There were found that the different biotypes exhibited different ranges of resistance to this herbicide; the resistant factors were 7.2, 13, and 36.6, respectively. DM absorption, metabolism, and effects on ACCase isoforms were examined in these biotypes of L. rigidum. The most highly resistant, biotype R3, contained an altered isoform of ACCase. In biotype R2, which exhibited a medium level of resistance, there was an increased rate of oxidation of the aryl ring of diclofop, a reaction most likely catalyzed by a cytochrome P450 enzyme. In the other biotype, R1, DM penetration was significantly less than that observed in the resistant (R2 and R3) and susceptible (S) biotypes. Analysis of the leaf cuticle surface by scanning electron microscopy showed a greater epicuticular wax density in the leaf cuticles of biotype R1 than in the other biotypes.

Relative humidity and temperature modify the mechanical properties of isolated tomato fruit cuticles

The mechanical properties of enzymatically isolated cuticular membrane (CM) from ripe tomato fruits were investigated at 10 to 45°C and relative humidity (RH) of 40 to wet. CM samples were stressed by uniaxial tension loads to determine their tensile modulus, E, breaking stress (strength), σ(max), and maximum elongation, ε(max). The CM stress-strain curves revealed a biphasic behavior when tested at RH values below wet conditions. In the first phase, CM responded to the loads by instantaneous extension with no further extension recorded until a further load was added: defined as pure elastic strain (E(e)). In the second phase, CM responded by instantaneous extension and by some additional time-dependent extension, defined as viscoelastic strain (E(v)). When CMs were submerged in aqueous solution (wet), the stress-strain curves were monophasic, with both elastic and viscoelastic strain. E(e) depended on RH and was higher than E(v), which was independent of RH. Temperature decreased E(e) and σ(max) of tomato fruit CM. Temperature response was not linear but consisted of two temperature-independent phases separated by a transition temperature. This transition zone has been related previously to the presence of a secondary phase transition in the cutin matrix of the tomato fruit CM.

Glycerol Derivatives of Cutin and Suberin Monomers: Synthesis and Self-Assembly

Glycerol derivatives of cutin and suberin monomers were synthesized by acid catalysis. Their dispersion in an aqueous solution was examined by phase contrast microscopy, neutron scattering, and solid state NMR. It is shown that the phase behavior strongly depends on the nature of the derivatives forming either lumps of aggregated membranes or well dispersed membranes.

Studies on the structure of the plant wax nonacosan-10-ol, the main component of epicuticular wax conifers

The main component presents in the epicuticular waxes of needles of Pinus halepensis and the most of conifers, the secondary alcohol nonacosan-10-ol, has been investigated by X-ray diffraction and differential scanning calorimetry. The results obtained from these physical techniques permitted to establish a definitive structural model of the molecular arrangement of this wax, basically in good agreement with the model formulated by other authors from theoretical formulations. Biological implications of the proposed structure have been also formulated.

Plant biopolyester cutin: a tough way to its chemical synthesis

The chemical synthesis of an aliphatic biopolyester identical to the natural cutin which constitutes the major component of the cuticle of fruits and leaves of higher plants is for the first time achieved and reported. Potential applications of this new material is of great interest because its physical properties, non-toxicity, biodegradability, and availability of raw material.

Molecular characterization of the plant biopolyester cutin by AFM and spectroscopic techniques

Atomic force microscopy, FT-IR spectroscopy, and solid-state nuclear magnetic resonance have been used to improve our current knowledge on the molecular characteristics of the biopolyester cutin, the main component of the plant cuticle. After comparison of samples of cutin isolated from young and mature tomato fruit cuticles has been possible to establish different degrees of cross-linking in the biopolymer and that the polymer is mainly formed after esterification of secondary hydroxyl groups of the monomers that form this type of cutin. Atomic force microscopy gave useful structural information on the molecular topography of the outer surface of the isolated samples. The texture of these samples is a consequence of the cross-linking degree or chemical status of the polymer. Thus, the more dense and cross-linked cutin from ripe or mature tomato fruit is characterized by a flatter and more globular texture in addition to the development of elongated and orientated superstructures.