Investigation of the exclusive 3He(e,e' pn)1H reaction

Cross sections for the 3He(e,e' pn)1H reaction were measured for the first time at energy transfers of 220 and 270 MeV for several momentum transfers ranging from 300 to 450 MeV/c. Cross sections are presented as a function of the momentum of the recoil proton and the momentum transfer. Continuum Faddeev calculations using the Argonne V18 and Bonn-B nucleon-nucleon potentials overestimate the measured cross sections by a factor 5 at low recoil proton momentum with the discrepancy becoming smaller at higher recoil proton momentum.

Size-dependent effects of tungsten carbide-cobalt particles on oxygen radical production and activation of cell signaling pathways in murine epidermal cells

Hard metal or cemented carbide consists of a mixture of tungsten carbide (WC) (85%) and metallic cobalt (Co) (5-15%). WC-Co is considered to be potentially carcinogenic to humans. However, no comparison of the adverse effects of nano-sized WC-Co particles is available to date. In the present study, we compared the ability of nano- and fine-sized WC-Co particles to form free radicals and propensity to activate the transcription factors, AP-1 and NF-kappaB, along with stimulation of mitogen-activated protein kinase (MAPK) signaling pathways in a mouse epidermal cell line (JB6 P(+)). Our results demonstrated that nano-WC-Co generated a higher level of hydroxyl radicals, induced greater oxidative stress, as evidenced by a decrease of GSH levels, and caused faster JB6 P(+) cell growth/proliferation than observed after exposure of cells to fine WC-Co. In addition, nano-WC-Co activated AP-1 and NF-kappaB more efficiently in JB6(+/+) cells as compared to fine WC-Co. Experiments using AP-1-luciferase reporter transgenic mice confirmed the activation of AP-1 by nano-WC-Co. Nano- and fine-sized WC-Co particles also stimulated MAPKs, including ERKs, p38, and JNKs with significantly higher potency of nano-WC-Co. Finally, co-incubation of the JB6(+/+) cells with N-acetyl-cysteine decreased AP-1 activation and phosphorylation of ERKs, p38 kinase, and JNKs, thus suggesting that oxidative stress is involved in WC-Co-induced toxicity and AP-1 activation.

A comparison of two rehabilitation protocols after simultaneous bilateral total knee arthroplasty: a controlled, randomized study

Post-operative outcomes after simultaneous bilateral total knee arthroplasty in 115 patients randomly assigned to two rehabilitation protocols were compared. The traditional-protocol group performed a series of exercises on one leg and then repeated the same sequence on the other leg. The alternate-protocol group performed the same exercises, but alternated between legs with each individual repetition. Symptoms and function were assessed pre-operatively and at 1, 3, 6 and 12 months post-operatively. The alternate-protocol group had lower visual analogue pain scale scores in the early post-operative period, as well as higher Knee Society Scores and SF-12 physical and mental health summary scores after 1 and 3 months compared with the traditional-protocol group, but there were no differences between the two groups from 6 months post-operatively. There were no significant differences between the groups in terms of range of knee motion or incidence of deep vein thrombosis. The alternate-protocol for rehabilitation resulted in an early return to function and decreased pain levels following simultaneous bilateral total knee arthroplasty and was associated with the potential to produce more positive emotional states and earlier functional independence.

Bone density does not reflect mechanical properties in early-stage arthrosis

Subchondral cancellous bone specimens were removed from 10 human postmortem early-stage arthrotic proximal tibiae (mean age 73 (63-81) years) and 10 age- and gender-matched normal proximal tibiae. The early-stage arthrosis was confirmed histologically and the specimens were divided into 4 groups: medial arthrosis, lateral control, normal medial and normal lateral controls. The specimens were tested in compression to determine mechanical properties and then physical/compositional properties. Compared to the normal medial control, we found reductions in ultimate stress, Young's modulus, and failure energy, and an increase in ultimate strain of arthrotic cancellous bone. Bone volume fraction, apparent density, apparent ash density, and collagen density were higher in cancellous bone with arthrosis, but no differences were found in tissue density, mineral and collagen concentrations between arthrotic cancellous bone and the 3 controls. None of the mechanical properties of arthrotic cancellous bone could be predicted by the physical/compositional properties measured. The increase in bone tissue in early-stage arthrotic cancellous bone did not make up for the loss of mechanical properties, which suggests a deterioration in the quality of arthrotic cancellous bone.

An extension to 3D topological thinning method based on LUT for colon centerline extraction

Topological thinning is a valid but time-consuming method to calculate the centerline of human colon or other hollow organs accurately. An optimized 3D topological thinning method based on Look-up Table (LUT), which was proposed by Sadlier, proves to be effective in improving the efficiency on many occasions. However, it is still inefficient when processing some complex datasets. In this paper, we first analyze the reason causing the unstable performance, and then present an extension to Sadlier's method, which enables the rapid execution of the extraneous loops removing by avoiding unnecessary global connectivity testing. To reach this purpose, a min-heap structure is introduced to select a seed from the candidate voxels set of the final centerline, and region growing technique is used to find the voxels in the same branch with the seed. The comparison among the standard topological thinning, LUT method and the extension to LUT method indicates the extension achieves the most efficient performance.

Differentiation of mouse nuclear transfer embryonic stem cells into functional pancreatic beta cells

AIMS/HYPOTHESIS

Therapeutic cloning has been reported to have potential in the treatment of several degenerative diseases. However, it has yet to be determined whether mouse nuclear transfer-embryonic stem cells (NT-ESCs) can be differentiated into pancreatic beta cells and used to reverse diabetes in an animal model.

METHODS

We first used the somatic nuclear transfer technique to generate mouse NT-ESCs and then developed a chemically defined stepwise protocol to direct the NT-ESCs into functional pancreatic beta cells. We examined the gene expression pattern of the differentiated NT-ESCs and transplanted the NT-ESC-derived insulin-producing cells into recipient diabetic mice.

RESULTS

Four mouse NT-ESC lines were first established using an improved nuclear transfer technique and insulin-producing cells were efficiently generated from NT-ESCs by mimicking pancreatic in vivo development. Most of the insulin-producing cells that we generated co-produced pancreatic and duodenal homeobox 1, but not glucagon at the final stage of this differentiation method, which differed from the insulin and glucagon co-production reported by other groups. The differentiated NT-ESCs were able to release insulin in response to glucose stimuli and normalise the blood glucose level of diabetic mice for at least 2 months.

CONCLUSIONS/INTERPRETATION

These results demonstrate the potential of therapeutic cloning for cell therapy of type 1 diabetes in a mouse model.

Response preparation and inhibition: the role of the cortical sensorimotor beta rhythm

Paradigms requiring either a GO or a NO-GO response are often used to study the neural mechanisms of response inhibition. Here this issue is examined from the perspective of event-related beta (14-30 Hz) oscillatory activity. Two macaque monkeys performed a task that began with a self-initiated lever depression and maintenance (sustained motor output) and required a visual pattern discrimination followed by either a lever release (GO) or continued lever-holding (NO-GO) response. Analyzing simultaneous local field potentials (LFPs) from primary somatosensory, frontal motor, and posterior parietal cortices, we report two results. First, beta oscillation desynchronized shortly after stimulus presentation, the onset of which was approximately the same for both the GO and NO-GO conditions ( approximately 110 ms). Since it is well known that beta desynchronization is a reliable indicator of movement preparation, this result suggests that early motor preparation took place in both conditions. Second, following the GO/NO-GO decision ( approximately 190 ms), beta activity rebounded significantly ( approximately 300 ms) only in the NO-GO condition. Coherence and Granger causality measures revealed that the dynamical organization of the rebounded beta network was similar to that existing during the sustained motor output prior to stimulus onset. This finding suggests that response inhibition led to the restoration of the sensorimotor network to its prestimulus state.

Gene expression in lung and basal forebrain during influenza infection in mice

Inbred mice develop strain-dependent changes in sleep during the first few days after inoculation with influenza virus. To identify genes with the potential to differentially modulate sleep under this condition, we performed complementary DNA microarray analysis of both lung and basal forebrain (BF) of infected (I) and uninfected BALB/cByJ (C) and C57BL/6J (B6) mice. This analysis showed significant variation in the expression pattern of 667 and 1217 of the surveyed genes in BF and lung, respectively (P < 0.01). Applying the additional criterion of an effect size >or=2, 495 genes differed in expression in lung compared with 204 in BF. In BF, more genes were differentially expressed as a function of mouse strain, whereas in lung, more genes were differentially expressed as a function of health status. Significant alterations in expression after infection were more numerous and robust in BALB/cByJ vs. C57BL/6J mice. Some genes showed significant variation in both tissues as a function of strain or condition, but the changes in general were not parallel. Genes that showed significant and robust variation as a function of strain, health status or tissue included those related to immune function, metabolism, signal transduction, cell cycle regulation, apoptosis and other miscellaneous categories. Different patterns of gene expression in BF of uninfected mice suggest the possibility of fundamental mechanistic differences in pathways that modulate vigilance in these strains, whereas differences in expression of lung of infected mice suggests different peripherally generated sleep-modulatory stimuli in the two strains.

Stilbene C-glucosides from Cissus repens

Four new stilbene C-glucosides, namely trans-3-O-methyl-resveratrol-2-C-beta-glucoside (1), cis-3-O-methyl-resveratrol-2-C-beta-glucoside (2), trans-3-O-methyl-resveratrol-2-(2-p-coumaric)-C-beta-glucoside (cissuside A) (3), and trans-3-O-methyl-resveratrol-2-(3-p-coumaric)-C-beta-glucoside (cissuside B) (4), were isolated from the aerial parts of Cissus repens, along with known trans-resveratrol (5), trans-resveratrol-2-C-beta-glucoside (6) and cis-resveratrol-2-C-beta-glucoside (7). Their structures were established by spectroscopic methods. Stilbene C-glucosides were found in the genus Cissus for the first time.

Capillary Number Correlations for Gas-Liquid Systems

Abstract

Conventional capillary number theory predicts that residual oil will not be mobilized until a critical capillary number (2E - 5) is exceeded. This theory was tested to determine residual oil saturation mobilization after forced water imbibition. In the literature, high residual oil saturation was established from waterflooding at a certain pressure. Then gradually increasing pressure was applied for water injection until residual oil production was observed. It was confirmed that this critical capillary number is applicable when the initial residual oil saturation was estimated from spontaneous water imbibition tests. The same types of experiments were repeated for gas-liquid systems by creating the initial residual gas saturation through spontaneous oil or water imbibition tests on the same samples. The procedures, which included spontaneous imbibition tests followed by forced imbibition tests, were monitored by an on-line NMR system. Analysis of the experimental results produced an estimate of the critical capillary number for mobilizing residual gas from water imbibition or oil imbibition tests. In this research, we broadened the term of "imbibition" for both water and oil terms since, compared to gas, both water and oil are in the wetting phase. It was found that the critical capillary number for a gas-liquid system is very different from that of an oil-water system in the same type of rock.

Berea sandstone plugs were used in all the experiments. The reason for using Berea sandstone plugs is due to their relatively homogeneous pore structure. Additional Western Canadian sandstone plugs were used for testing gas-water systems to confirm the results obtained from the Berea sandstone plugs. Understanding the different mechanisms to produce discontinuous residual oil or residual gas is important for enhanced oil and gas recovery operations. Hopefully, this research can provide new insights into recovering additional gas from gas reservoirs with active aquifers.

Introduction

Increasing the capillary number has long been investigated as a strategy for improving oil recovery. Many methodologies around increasing the capillary number have been either tested in the laboratory or applied in the field. Capillary number is defined as the ratio of viscous forces to capillary forces. Evaluation of the capillary number can be used to describe the relative importance of viscous forces to capillary forces during immiscible displacements. There are various forms of the capillary number. The most common versions of capillary number are those by Saffman and Taylor(1):

Equation (1) (Available in full paper)

and Melrose and Brandner(2):

Equation (2) (Available in full paper)

When non-wetting phase oil is trapped in porous media, the pressure gradient required to move it through a capillary tube is much higher than what would be predicted by the pipe flow equation, due to the pressure discontinuity at the wetting/non-wetting interface. Because of the contact angle hysteresis, this discontinuity is not of the same magnitude on both sides of the discontinuous non-wetting phase. For example, in a water-wet medium, an oil droplet represents the discontinuous non-wetting phase. As the oil droplet is pushed through a pore throat, its downstream end gets squeezed into a much narrower segment making its radius of curvature much smaller than the upstream part.

Optimisation and validation of a medium-throughput electrophysiology-based hERG assay using IonWorks™ HT

INTRODUCTION

Regulatory and competitive pressure to reduce the QT interval prolongation risk of potential new drugs has led to focus on methods to test for inhibition of the human ether-a-go-go-related gene (hERG)-encoded K+ channel, the primary molecular target underlying this safety issue. Here we describe the validation of a method that combines medium-throughput with direct assessment of channel function.

METHODS

The electrophysiological and pharmacological properties of hERG were compared using two methods: conventional, low-throughput electrophysiology and planar-array-based, medium-throughput electrophysiology (IonWorks HT). A pharmacological comparison was also made between IonWorks HT and an indirect assay (Rb+ efflux).

RESULTS

Basic electrophysiological properties of hERG were similar whether recorded conventionally (HEK cells) or using IonWorks HT (CHO cells): for example, tail current V1/2 -12.1+/-5.0 mV (32) for conventional and -9.5+/-6.0 mV (46) for IonWorks HT (mean+/-S.D. (n)). A key finding was that as the number of cells per well was increased in IonWorks HT, the potency reported for a given compound decreased. Using the lowest possible cell concentration (250,000 cells/ml) and 89 compounds spanning a broad potency range, the pIC50 values from IonWorks HT (CHO-hERG) were found to correlate well with those obtained using conventional methodology (HEK-hERG)(r=0.90; p<0.001). Further validation using CHO-hERG cells with both methods confirmed the correlation (r=0.94; p<0.001). In contrast, a comparison of IonWorks HT and Rb+ efflux data with 649 compounds using CHO-hERG cells showed that the indirect assay consistently reported compounds as being, on average, 6-fold less potent, though the differences varied depending on chemical series.

DISCUSSION

The main finding of this work is that providing a relatively low cell concentration is used in IonWorks HT, the potency information generated correlates well with that determined using conventional electrophysiology. The effect on potency of increasing cell concentration may relate to a reduced free concentration of test compound owing to partitioning into cell membranes. In summary, the IonWorks HT hERG assay can generate pIC50 values based on a direct assessment of channel function in a timeframe short enough to influence chemical design.