Formation of intermetallic compound layer in multi-laminated Ni-(TiB2/Al) composite sheets during annealing treatment

Solid-state reactive diffusion between Ni and Al was investigated during annealing at 650°C by employing multi-laminated Ni-(TiB(2)/Al) composite sheets. In multi-laminated Ni-(TiB(2)/Al) composite sheets annealed up to 5min NiAl(3) was the only phase observed in the diffusion zone, and Ni(2)Al(3) appeared after longer annealing time. Most grains of Ni(2)Al(3) showed equiaxed morphology rather than columnar microstructures like NiAl(3), due to the low concentration gradients of Al and Ni at the Ni/NiAl(3) interface. The preferential formation of this intermetallic compound NiAl(3) in multi-laminated Ni-(TiB(2)/Al) composite sheets was predicted using an effective heat of formation model. The present work indicated that both Ni and Al interdiffused, and the formation of NiAl(3) was a reaction-diffusion process.

(4R*,5R*)-Diethyl 2-(4-nitro-phen-yl)-1,3-dioxolane-4,5-dicarboxyl-ate

In the title compound, C₁₅H₁₇NO₈, the nitro group is essentially coplanar with the aromatic ring [dihedral angle = 6.4 (3) Å]. The five-membered ring has a twist conformation. In the crystal, C—H⋯O inter­actions link the mol­ecules into a helical chain propagating along [010].

(4R*,5R*)-2-(4-Methoxyphenyl)-1,3-dioxolane-4,5-dicarboxamide

In the title compound, C₁₂H₁₄N₂O₅, the five-membered 1,3-dioxolane ring has a twisted conformation. In the crystal, N—H⋯O and C—H⋯O hydrogen bonds link the mol­ecules into a two-dimensional network lying parallel to the ab plane. There are also C—H⋯π inter­actions present in the crystal structure.

Valproate versus diazepam for generalized convulsive status epilepticus: a pilot study

BACKGROUND AND PURPOSE

Evidence-based data to guide the management of status epilepticus (SE) after failure of primary treatment are still scarce and the alternate needs to be found when phenytoin (PHT) is not available or contraindicated. Comparison of intravenous (IV) valproate (VPA) and diazepam (DZP) infusion has not been conducted in adults with SE. This prospective randomized controlled trial is thus designed to evaluate the relative efficacy and safety of IV VPA and continuous DZP infusion as second-line anticonvulsants.

METHODS

After failure of first-line anticonvulsants treatment, patients with generalized convulsive status epilepticus (GCSE) were randomized to receive either IV VPA or continuous DZP infusion. Primary outcome was the proportion of patients with effective control. Side effects were also evaluated.

RESULTS

There were 66 cases enrolled, with the mean age of 41 ± 21 years. Seizure was controlled in 56% (20/36) of the DZP group and 50% (15/30) of the VPA group (P = 0.652). No patient in the VPA group developed respiratory depression, hypotension, or hepatic dysfunction, whereas in the DZP group, 5.5% required ventilation and 5.5% developed hypotension. Time (hour) for regaining consciousness after control was near-significantly longer in the DZP group [13(3.15-21.5)] than in the VPA group [3(0.75-11)] (P = 0.057). Virus encephalitis and long duration of GCSE were independent risk factors of drug resistance.

CONCLUSIONS

  Both IV VPA and continuous DZP infusion are effective second-line anticonvulsants for GCSE. IV VPA was well tolerated and free of respiratory depression and hypotension, which may develop in the DZP group. Outcome parameters were not significantly different between groups.

Heritability estimates and linkage analysis of 23 short tandem repeat loci on chromosomes 2, 11, and 12 in an endemic osteochondropathy in China

OBJECTIVE

To estimate the heritability of Kashin-Beck disease (KBD) in first-degree relatives and to identify chromosome regions likely to contain susceptibility loci for KBD.

METHODS

A total of 331 probands with confirmed KBD in their pedigrees were selected from 9331 residents in 17 KBD villages of Linyou county, northwestern China. The heritability (h(2)) in first-degree relatives was estimated by using Falconer's formula. The segregation ratio was calculated by the Li-Mantel-Gart method. A total of 23 short tandem repeat (STR) loci on chromosomes 2, 11, and 12 were used to identify the susceptibility genes for KBD by linkage analysis using the GENEHUNTER program in 19 KBD pedigrees.

RESULTS

The general prevalence rate of KBD was 13.75% in the 17 KBD villages, lower than that of 20.88% in the first-degree relatives of the KBD probands. In the first-degree relatives, the heritability was 0.064 and the segregation ratio 35.10% (p < 0.05). Slight evidence for heritability was detected only in locus D12S1725 with a logarithm of odds (LOD) score of 1.95. However, the nonparametric linkage (NPL) scores showed no linkage between KBD and the 23 loci; the maximum NPL score was 1.59 for locus D12S1725.

CONCLUSIONS

Our results show that 35.10% of the heritability is attributable to genetic variation for the KBD phenotype among individuals of Linyou county, and the segregation ratio supports a multifactorial inheritance of KBD. There is no significant linkage between KBD and the 23 markers in the Linyou population examined; however, markers near the locus D12S1725 may indicate loci for further study.

Adverse health effects of lead exposure on children and exploration to internal lead indicator

Our research on adverse effects of lead exposures on physical and neurobehavioral health of children aged 6-12years in 4 villages, labeled as K, M, L, and X, in rural China, was reported in this article. Lead in blood (PbB), urine (PbU), hairs (PbH), and nails (PbN) were measured by graphite furnace atomic absorption spectrometry. Abbreviated Symptom Questionnaire of Conner's instruments and Revised Raven's Standard Progressive Matrices were applied to evaluate childhood attention deficit/hyperactivity disorders (ADHD) and intelligences. Geometric means (SD) of PbB, PbU, PbH and PbN concentrations were 71.2 microg/L (1.56), 11.7 microg/g (1.75), 12.5 microg/g (2.82), and 25.3 microg/g (2.79), respectively. 54 (17.0%) children had PbB levels of > or =100 microg/L. Boys, 6-10 years old, and living in village K were 2.11, 2.48, and 9.16 times, respectively, more likely to be poisoned by lead than girls, aged 11-12 years, and residing in X. 18 (5.7%) and 37 (11.7%) subjects had ADHD and mental retardations, respectively. Inverse relationships between intelligences and natural log transformed PbU and PbH levels were observed with respective odds ratios (95%CI) of 1.79 (1.00-3.22) and 1.46 (1.06-2.03) or 1.28 (1.04-1.58) and 1.73 (1.18-2.52) by binary or ordinal logistic regression modeling. ADHD prevalence was different by gender and age of subjects. PbU, PbH, and PbN related to PbB positively with respective correlation coefficients of 0.530, 0.477, and 0.181. Receiver operating characteristic (ROC) curves of the three measurements revealed areas under curves (AUCs) being 0.829, 0.758, and 0.687, respectively. In conclusion, children had moderate levels of lead exposures in this rural area. Intelligence declines were associated with internal lead levels among children. ROC analysis suggests PbU an internal lead indicator close to PbB.

Selected Stro-1-enriched bone marrow stromal cells display a major suppressive effect on lymphocyte proliferation

Mesenchymal stem cells (MSCs) have an immunosuppressive effect and can inhibit the proliferation of alloreactive T cells in vitro and in vivo. Cotransplantation of MSCs and hematopoietic stem cells (HSCs) from HLA-identical siblings has been shown to reduce the incidence of acute graft-vs.-host disease. MSCs are heterogeneous and data on the inhibitory effects of different MSC subsets are lacking. The antigen Stro1 is a marker for a pure primitive MSC subset. We investigated whether Stro-1-enriched induce a more significant suppressive effect on lymphocytes in a mixed lymphocyte reaction (MLR), and whether this action is related to a specific gene expression profile in Stro-1-enriched compared to other MSCs. We demonstrated that the Stro-1-enriched population elicits a significantly more profound dose-dependent inhibition of lymphocyte proliferation in a MLR than MSCs. One thousand expanded Stro-1-enriched induced an inhibitory effect comparable to that of 10 times as many MSCs. Inhibition by Stro-1-enriched was more significant in contact-dependent cultures than in noncontact-dependant cultures at higher ratio. The Stro-1-enriched inhibitory effect in both culture types was linked to increased gene expression for soluble inhibitory factors such as interleukin-8 (IL-8), leukemia inhibitory factor (LIF), indoleamine oxidase (IDO), human leukocyte antigen-G (HLA-G), and vascular cell adhesion molecule (VCAM1). However, tumor growth factor-beta1 (TGF-beta) and IL-10 were only up-regulated in contact-dependant cultures. These results may support using a purified Stro-1-enriched population to augment the suppressive effect in allogeneic transplantation.

Mismatch repair gene mutations in Chinese HNPCC patients

To explore the characteristics of DNA mismatch repair gene mutations in Chinese patients with hereditary non-polyposis colorectal cancer (HNPCC) or Lynch syndrome, the MLH1 and MSH2 genes from probands of 76 HNPCC families were sequenced. By doing so, two frame-shift mutations, three splice-site mutations and fourteen missense mutations (thirteen missense mutations and one nonsense mutation) were identified in the MLH1 gene. In addition, one splice-site mutation and six missense mutations were detected in the MSH2 gene. None of these mutations were detected in 100 matched healthy controls. The remaining mutation-negative cases were subjected to large fragment deletion analysis using multiplex ligation-dependent probe amplification (MLPA). By doing so, five large fragment deletions were detected in the MSH2 gene. No large fragment deletions were detected in the MLH1 gene. We conclude that the MLH1 and MSH2 genes in Chinese HNPCC families exhibit broad mutation spectra.

Flocculation behavior and mechanism of an exopolysaccharide from the deep-sea psychrophilic bacterium Pseudoalteromonas sp. SM9913

Flocculation behavior and mechanism of the exopolysaccharide secreted by Pseudoalteromonas sp. SM9913 (EPS SM9913), a psychrophilic bacterium isolated from 1855m deep-sea sediment, has been studied in this paper. EPS SM9913 showed a peak flocculating activity of 49.3 in 1g/L kaolin suspension with 4.55mmol/L CaCl2 and the optimum pH range of 5-8. It appears that the flocculating activity of EPS SM9913 was stimulated by Ca2+ and Fe2+. This study found that EPS SM9913 showed a better flocculation performance than Al2(SO4)3 at salinity of 5-100 per thousand or temperatures of 5-15 degrees C. In addition, this EPS was effective to flocculate several other suspended solids. The measured zeta-potentials, the size of flocs formed during the flocculation process and the surface profile of flocs revealed by scan electron micrograph suggest that bridging is the main flocculation mechanism of the studied EPS. Deacetylation of EPS SM9913 resulted in a significant decrease in its flocculating activity indicating that the large number of acetyl groups in EPS SM9913 played an important role in its flocculation performance.

Zirconia toughened alumina ceramic foams for potential bone graft applications: fabrication, bioactivation, and cellular responses

Zirconia toughened alumina (ZTA) has been regarded as the next generation orthopedic graft material due to its excellent mechanical properties and biocompatibility. Porous ZTA ceramics with good interconnectivity can potentially be used as bone grafts for load-bearing applications. In this work, three-dimensional (3D) interconnected porous ZTA ceramics were fabricated using a direct foaming method with egg white protein as binder and foaming agent. The results showed that the porous ZTA ceramics possessed a bimodal pore size distribution. Their mechanical properties were comparable to those of cancellous bone. Due to the bio-inertness of alumina and zirconia ceramics, surface bioactivation of the ZTA foams was carried out in order to improve their bioactivity. A simple NaOH soaking method was employed to change the surface chemistry of ZTA through hydroxylation. Treated samples were tested by conducting osteoblast-like cell culture in vitro. Improvement on cells response was observed and the strength of porous ZTA has not been deteriorated after the NaOH treatment. The porous 'bioactivated' ZTA ceramics produced here could be potentially used as non-degradable bone grafts for load-bearing applications.

Chitosan nanofibers from an easily electrospinnable UHMWPEO-doped chitosan solution system

Conversion of natural biopolymer chitosan into nanofibers through electrospinning has significant usefulness in various biomedical applications, in particular, for constructing a biomimetic and bioactive nanofibrous artificial extracellular matrix for engineering various tissues. Here, we show that introduction of an ultrahigh-molecular-weight poly(ethylene oxide) (UHMWPEO) into aqueous chitosan solutions remarkably enhances the formation of chitosan nanofibrous structure and leads to much lower loading of the water soluble fiber-forming aiding agent of PEO down to 5 wt % as compared to previous high PEO loadings in the electrospun chitosan nanofibers. The excellent electrospinnability of the current formulation renders electrospinning of natural biopolymer chitosan a robust process for large-scale production of practically applicable nanofibrous structures.

Biomimetic and bioactive nanofibrous scaffolds from electrospun composite nanofibers

Electrospinning is an enabling technology that can architecturally (in terms of geometry, morphology or topography) and biochemically fabricate engineered cellular scaffolds that mimic the native extracellular matrix (ECM). This is especially important and forms one of the essential paradigms in the area of tissue engineering. While biomimesis of the physical dimensions of native ECM's major constituents (eg, collagen) is no longer a fabrication-related challenge in tissue engineering research, conveying bioactivity to electrospun nanofibrous structures will determine the efficiency of utilizing electrospun nanofibers for regenerating biologically functional tissues. This can certainly be achieved through developing composite nanofibers. This article gives a brief overview on the current development and application status of employing electrospun composite nanofibers for constructing biomimetic and bioactive tissue scaffolds. Considering that composites consist of at least two material components and phases, this review details three different configurations of nanofibrous composite structures by using hybridizing basic binary material systems as example. These are components blended composite nanofiber, core-shell structured composite nanofiber, and nanofibrous mingled structure.

Genetic analysis of four porcine avian influenza viruses isolated from Shandong, China

A Bayesian phylogenetic analysis of eight separate gene segments indicated A/Swine/Shandong/2/2003 (H5N1), A/Swine/Shandong/na/2003 (H9N2), A/Swine/Shandong/nb/2003 (H9N2) and A/Swine/Shandong/nc/2005 (H9N2) probably represent two multiple reassortant lineages, that had not been described before, with genes coming from H5N1, H9N2 and other lineages from poultry in Asia. Amino acid motifs within the haemagglutinin sequence of A/Swine/Shandong/nb/2003 suggested it may be able to infect people, whereas the sequences of the other three isolates suggested they would not have had that capability. Our analysis emphasizes the need for a comprehensive study of the interactions between H5N1 and H9N2 viruses in Asia that includes sequencing and phylogenetic investigation.

A novel DFNA5 mutation, IVS8+4 A>G, in the splice donor site of intron 8 causes late-onset non-syndromic hearing loss in a Chinese family

We report here the clinical, genetic, and molecular characteristics of a large Chinese family exhibiting non-syndromic, late-onset autosomal dominant sensorineural hearing loss. Clinical evaluation revealed variable phenotypes of hearing loss in terms of severity and age-at-onset of disease in these subjects. Genome-wide linkage analysis mapped the disease gene to the DFNA5 locus with a maximum two-point log odds score of 5.39 at [theta] = 0 for marker D7S2457. DNA sequencing of DFNA5 revealed a novel heterozygous IVS8+4 A>G substitution in the splice donor site of intron 8. Reverse transcriptase-polymerase chain reaction (RT-PCR) showed skipping of exon 8 in the mutant transcript. This mutation faithfully cosegregated with hearing loss in the family. In addition, the mutation was absent in 100 unrelated control DNA samples of Chinese origin. The IVS8+4 A>G mutation is predicted to create a shift in the reading frame and introduce a stop codon at position 372, thereby resulting in a prematurely truncated DFNA5 protein. Up to date, a total of four mutations in DFNA5 have been reported to lead to hearing impairment, all of them result in skipping of exon 8 at the mRNA level. Our findings provide further support for the hypothesis that DFNA5-associated hearing loss is caused by a very specific gain-of-function mutation.

Evaluation of electrospun PCL/gelatin nanofibrous scaffold for wound healing and layered dermal reconstitution

The current design requirement for a tissue engineering skin substitute is that of a biodegradable scaffold through which fibroblasts can migrate and populate. This artificial "dermal layer" needs to adhere to and integrate with the wound, which is not always successful for the current artificial dermal analogues available. The high cost of these artificial dermal analogues also makes their application prohibitive both to surgeons and patients. We propose a cost-effective composite consisting of a nanofibrous scaffold directly electrospun onto a polyurethane dressing (Tegaderm, 3M Medical) - which we call the Tegaderm-nanofiber (TG-NF) construct - for dermal wound healing. Cell culture is performed on both sides of the nanofibrous scaffold and tested for fibroblast adhesion and proliferation. It is hoped that these studies will result in a fibroblast-populated three-dimensional dermal analogue that is feasible for layered applications to build up thickness of dermis prior to re-epithelialization. Results obtained in this study suggest that both the TG-NF construct and dual-sided fibroblast-populated nanofiber construct achieved significant cell adhesion, growth and proliferation. This is a successful first step for the nanofiber construct in establishing itself as a suitable three-dimensional scaffold for autogenous fibroblast populations, and providing great potential in the treatment of dermal wounds through layered application.

Screening and mutagenesis of a novel Bacillus pumilus strain producing alkaline protease for dehairing

AIMS

To characterize and optimize a novel Bacillus pumilus strain isolated from biological waste which produces protease with excellent dehairing effect. This newly isolated strain could be utilized in the industrial leather dehairing process.

METHODS AND RESULTS

Bacterial strains secreting proteases were screened from biological wastes. Positive clones were further characterized by analysing their efficacy in dehairing and effects on collagen integrity. Among 171 colonies tested, a strain BA06, identified as B. pumilus, was picked owing to its efficient dehairing capabilities with minimal impact on collagen. By combined mutagenesis using UV, N-methyl-N'-nitro-N-nitrosdguanidine and Co(60)-gamma-rays, this strain was further improved with regard to its alkaline protease production. The alkaline protease activity of the mutant strain SCU11was greatly improved up to 6000 U ml(-1), in comparison with its parent strain BA06 of 1200 U ml(-1).

CONCLUSIONS

By using screening and mutagenesis methods, we have successfully created a B. pumilus strain that can produce high levels of alkaline proteases that are able to efficiently remove hair from skin with minimal damage on the collagen.

SIGNIFICANCE AND IMPACT OF THE STUDY

This strain could be used in commercial alkaline protease production for leather dehairing.

Oily skin: specific features in Chinese women

BACKGROUND/PURPOSE

Inconsistent data are available on the various types of skin, their prevalence and characterization, particularly regarding Asian skins. This observation prompted to conduct a large study in China to assess the prevalence of oily skin and identify the specific factors related to that type of skin.

METHODS

The multicentre trial involved 1787 Chinese women in Shenyang, Harbin, Beijing, Chengdu and Suzhou, between 18 and 65 years of age. Data on history of acne, the presence of environmental factors and a detailed self-evaluation of the skin were collected using a standardized questionnaire. A clinical evaluation of facial skin oiliness was carried-out by a dermatologist at each centre. Sebum secretion was measured on the forehead using Sebumeter SM810. Statistical analysis (multiple correspondence analysis) of typology was conducted based on self-evaluation data.

RESULTS

According to self-evaluation data, oily skin prevalence in the overall Chinese population of the study was 25.6%. Self-evaluation results were quite consistent with sebum measurements and with clinical assessment by dermatologist. Parameters associated with oily skin were (i) shiny skin and a past history of acne, (ii) irregular menstruation, and (iii) highly reactive or sensitive skin. Moreover, a clear and significant link was noted between oily skin and the ingestion of spicy or sweet food. Lastly, sebum levels were found to be twice as high in Beijing as in the other cities and were correlated to higher oily skin prevalence.

CONCLUSION

The study demonstrated the capacity of women for proper self-evaluation of their skin type. It also suggests a potential link between nutritional factors such as spicy and/or sweet diets and oily skin as well as between sensitive and oily skin in this population.

Development and assessment of conventional and targeted drug combinations for use in the treatment of aggressive breast cancers

Combination chemotherapy has been at the forefront of cancer treatment for over 40 years. However, the rationale for selecting drug combinations and the process used to demonstrate clinical effectiveness has primarily followed trial and error methodology. Typically, the selection and assessment of combined drug therapies has been based on the effectiveness of each agent as monotherapy in treating the neoplasm and avoiding overlapping toxicities, followed by clinical trials to establish dose scheduling, toxicity, and efficacy. Unfortunately, this scheme is inefficient in terms of the time required to complete and revise these clinical trials based on the outcome to optimize the drug combination. A more rational approach for the development of combination oncology products should consider (i) in vitro assays for assessing therapeutic effects of drug combinations (antagonistic, additive or synergistic interactions) when added simultaneously; (ii) methods for measuring these interactions in vivo; (iii) the importance of understanding pharmacokinetic and biodistribution parameters when using drug combinations; (iv) the need to assess pathways known to contribute to cancer cell survival as well as metastasis; and (iv) the need to assess the fate of different cell populations (cancer and stroma) contributing to the development of cancer. Therefore, the goal of this article is to provide a road map for the preclinical development of drug combination products that will have improved therapeutic activity and a high likelihood of providing beneficial therapeutic outcomes in patients with aggressive cancers with a specific focus on patients with breast cancer.

Adsorption of Hydrogen Isotopes on Micro- and Mesoporous Adsorbents with Orderly Structure

The equilibrium and dynamic adsorption data of H(2) and D(2) on different micro- and mesoporous adsorbents with orderly structure including 3A, 4A, 5A, Y, and 10X zeolites; carbon CMK-3; silica SBA-15; and so forth were collected. Critical effect of the nanodimension of adsorbents on the adsorption behavior of hydrogen and its isotopes is shown. The highest adsorption capacity was observed at pore size 0.7 nm, but equal or even larger isotope difference in the equilibrium adsorption was observed at larger pore sizes, whereas the largest isotope difference in the dynamic adsorption was observed at 0.5 nm. The adsorption rate of D(2) is larger than that of H(2) in microporous adsorbents, but the sequence could be switched over in mesoporous materials. Linear relationship was observed between the adsorption capacity for hydrogen and the specific surface area of adsorbents although the adsorbents are made of different material, which provides a convincing proof of the monolayer mechanism of hydrogen adsorption. The linear plot for microporous adsorbents has a larger slope than that for mesoporous adsorbents, which is attributed to the stronger adsorption potential in micropores.

Development of an effective sample preparation approach for proteomic analysis of silkworm eggs using two-dimensional gel electrophoresis and mass spectrometry

Sample preparation is still the first and important step toward successful two-dimensional gel electrophoresis (2DE) and identification in proteomics study. The 2DE profiling of eggs of silkworm species by using conventional one-step extraction, however, is unsatisfactory because high-abundance proteins such as egg-specific protein (ESP) and No 30 family (30 KP) in the extract lead to difficulties in detecting most of biologically relevant proteins. Based on the tendency of these abundant proteins to be soluble in Tris-HCl buffer, we report herein a robust approach in which the extract enriched in ESP and 30 KP was fractionationed and mixed with the re-extract of residual pellet in an optimal proportion. In comparison with the one-step method, the 2DE pattern was improved by this new method with over one-third enhancement in spots. A total of 48 unique proteins obtained have been furthermore identified by mass spectrometry (MS) and MS/MS. The identified proteins are found to include heat shock proteins families, ribosomal proteins, disulfide isomerase proteins, Glutathione S-transferase, and elongation factor, etc., which are mainly involved in some important processes. To our knowledge, this is the first time that the several proteins have been detected in silkworm eggs by proteomics means. This simple and reproducible approach would raise the opportunity of discovering and identifying more biomarkers and determining their possible roles in further studies.

Coaxial Electrospinning of (Fluorescein Isothiocyanate-Conjugated Bovine Serum Albumin)-Encapsulated Poly(ε-caprolactone) Nanofibers for Sustained Release

As an aim toward developing biologically mimetic and functional nanofiber-based tissue engineering scaffolds, we demonstrated the encapsulation of a model protein, fluorescein isothiocyanate-conjugated bovine serum albumin (fitcBSA), along with a water-soluble polymer, poly(ethylene glycol) (PEG), within the biodegradable poly(epsilon-caprolactone) (PCL) nanofibers using a coaxial electrospinning technique. By variation of the inner flow rates from 0.2 to 0.6 mL/h with a constant outer flow rate of 1.8 mL/h, fitcBSA loadings of 0.85-2.17 mg/g of nanofibrous membranes were prepared. Variation of flow rates also resulted in increases of fiber sizes from ca. 270 nm to 380 nm. The encapsulation of fitcBSA/PEG within PCL was subsequently characterized by laser confocal scanning microscopy, transmission electron microscopy (TEM), and X-ray photoelectron spectroscopy (XPS) analysis. In vitro release studies were conducted to evaluate sustained release potential of the core-sheath-structured composite nanofiber PCL-r-fitcBSA/PEG. As a negative control, composite nanofiber PCL/fitcBSA/PEG blend was prepared from a normal electrospinning method. It was found that core-sheath nanofibers PCL-r-fitcBSA/PEG pronouncedly alleviated the initial burst release for higher protein loading and gave better sustainability compared to that of PCL/fitcBSA/PEG nanofibers. The present study would provide a basis for further design and optimization of processing conditions to control the nanostructure of core-sheath composite nanofibers and ultimately achieve desired release kinetics of bioactive proteins (e.g., growth factors) for practical tissue engineering applications.

Fabrication of modified and functionalized polycaprolactone nanofibre scaffolds for vascular tissue engineering

Electrospun polymer nanofibres were originally developed for their durability and resistance to all forms of degradation and biodegradation. Some polymer nanofibres are biocompatible and biodegradable and therefore suitable for replacement of structurally or physiologically deficient tissues and organs in humans. Here, biocompatible polycaprolactone (PCL) nanofibre scaffolds modified with collagen types I and III were used for vascular tissue engineering. Coronary artery smooth muscle cells (SMCs) were grown on PCL nanofibres, modified PCL/collagen biocomposite nanofibres and collagen nanofibres. The results show that the modified PCL/collagen biocomposite nanofibre scaffolds provide required mechanical properties for regulation of normal cell function in vascular tissue engineering.

Characterization of the Surface Biocompatibility of the Electrospun PCL-Collagen Nanofibers Using Fibroblasts

The effect of nanofiber surface coatings on the cell's proliferation behavior was studied. Individually collagen-coated poly(epsilon-caprolactone) (PCL) nanofibers (i.e., Collagen-r-PCL in the form of a core-shell structure) were prepared by a coaxial electrospinning technique. A roughly collagen-coated PCL nanofibrous matrix was also prepared by soaking the PCL matrix in a 10 mg/mL collagen solution overnight. These two types of coated nanofibers were then used to investigate differences in biological responses in terms of proliferation and cell morphology of human dermal fibroblasts (HDF). It was found that coatings of collagen on PCL nanofibrous matrix definitely favored cells proliferation, and the efficiency is coating means dependent. As compared to PCL, the HDF density on the Collagen-r-PCL nanofiber membrane almost increased linearly by 19.5% (2 days), 22.9% (4 days), and 31.8% (6 days). In contrast, the roughly collagen-coated PCL increased only by 5.5% (2 days), 11.0% (4 days), and 21.0% (6 days). SEM observation indicated that the Collagen-r-PCL nanofibers encouraged cell migration inside the scaffolds. These findings suggest that the Collagen-r-PCL nanofibers can be used as novel functional biomimetic nanofibers toward achieving excellent integration between cells and scaffolds for tissue engineering applications.

Toxicity and protective efficiency of cryoprotectants to flounder (Paralichthys olivaceus) embryos

With the purpose of finding an ideal cryoprotectant or combination of cryoprotectants in a suitable concentration for flounder (Paralichthys olivaceus) embryo cryopreservation, we tested the toxicities, at culture temperature (16 degrees C), of five most commonly used cryoprotectants-dimethyl sulfoxide (Me2SO), glycerol, methanol (MeOH), 1,2-propylene glycol (PG) and ethylene glycol (EG). In addition, cryoprotective efficiency to flounder embryos of individual and combined cryoprotectants were tested at -15 degrees C for 60 min. Five different concentrations of each of the five cryoprotectants and 20 different combinations of these cryoprotectants were tested for their protective efficiency. The results showed that the toxicity to flounder embryos of the five cryoprotectants are in the following sequence: PG < MeOH < Me2SO < glycerol < EG (P < 0.05); whereas the protective efficiency of each cryoprotectant, at -15 degrees C for a period of 60 min, are in the following sequence: PG > Me2SO approximately MeOH approximately glycerol > EG (greater symbols mean P < 0.05, and approximate symbols mean P > 0.05). Methanol combined with any one of the other cryoprotectants gave the best protection, while ethylene glycol combined with any one of the other cryoprotectants gave the poorest protection at -15 degrees C. Toxicity effect was concentration dependent with the lowest concentration being the least toxic for all five cryoprotectants at 16 degrees C. For PG, MeOH and glycerol, 20% solutions gave the best protection at -15 degrees C; whereas a 15% solution of Me2SO, and a 10% solution of EG, gave the best protection at -15 degrees C.