Photoenzymatic Catalytic Cascade System of a Pyromellitic Diimide/g-C3N4 Heterojunction to Efficiently Regenerate NADH for Highly Selective CO2 Reduction toward Formic Acid

Photocatalytic reduction of carbon dioxide (CO₂) holds great promise for both clean energy and environment protection. However, the low activity and poor selectivity of photocatalysts are the main bottlenecks. Herein, inspired by artificial photosynthesis and taking advantages of high efficiency and specificity of bioenzymes, we marry photo with enzyme to synergistically solve the above problems. A metal-free heterojunction of pyromellitic diimide/g-C₃N₄ (PDI/CN) with an excellent visible light response (λ < 660 nm) is fabricated for achieving a photoenzymatic catalytic cascade system, which efficiently regenerates nicotinamide adenine dinucleotide (NADH) and selectively reduces CO₂ to formic acid (HCOOH). The highest NADH yield of the PDI/CN hybrid achieved is 75%, and the HCOOH generation rate achieved is 1.269 mmol g^-1 h^-1 with nearly 100% selectivity, which is much higher than those of the reported materials. The excellent photocatalytic performance is attributed to the unique photoenzymatic catalytic cascade system, heterointerface effect, good conductivity, and a wide sunlight response range of the PDI/CN heterojunction. This work provides an efficient strategy and a corresponding photocatalyst for the directional conversion of CO₂ to HCOOH.

Oxidative Conversion of Glucose to Formic Acid as a Renewable Hydrogen Source Using an Abundant Solid Base Catalyst

Formic acid is one of the most desirable liquid hydrogen carriers. The selective production of formic acid from monosaccharides in water under mild reaction conditions using solid catalysts was investigated. Calcium oxide, an abundant solid base catalyst available from seashell or limestone by thermal decomposition, was found to be the most active of the simple oxides tested, with formic acid yields of 50 % and 66 % from glucose and xylose, respectively, in 1.4 % H2 O2 aqueous solution at 343 K for 30 min. The main reaction pathway is a sequential formation of formic acid from glucose by C-C bond cleavage involving aldehyde groups in the acyclic form. The reaction also involves base-catalyzed aldose-ketose isomerization and retroaldol reaction, resulting in the formation of fructose and trioses including glyceraldehyde and dihydroxyacetone. These intermediates were further decomposed into formic acid or glycolic acid. The catalytic activity remained unchanged for further reuse by a simple post-calcination.

Optimization of decalcification techniques for histologic examination of the rat maxillary and mandibular incisors for toxicity studies

The objective of this study was to provide optimized processing for examination of rat incisors in nonclinical toxicity studies that enables analysis using immunohistochemistry (IHC). Rat maxillas and mandibles were decalcified in Immunocal, a formic acid decalcifier, and Decal Stat, a hydrochloric acid decalcifier, to evaluate tissue quality when with hematoxylin and eosin (H&E) stain and an IHC. Following necropsy of 10 to 13-week-old male Sprague Dawley rats, tissues were collected, trimmed, fixed in neutral buffered formalin (NBF), and placed into the corresponding decalcifying solution. After a pilot study with multiple timepoints for both decalcifying solutions, times were selected for the definitive study. Incisors in the definitive study were decalcified for 72, 96 or 120 hours in Immunocal and 24 hours in Decal Stat, trimmed, processed, embedded in paraffin, and sectioned. The microtomy process and sections were evaluated by histotechnologists. Sections were stained withH&E or an IHC to detect vimentin. Veterinary pathologists used blinded assessment to evaluate staining and tissue quality. The H&E sections from Immunocal timepoints scored higher based on criteria such as cellular morphology. However, tissue quality decreased at 120 hours with Immunocal but was adequate after 24 hours with Decal Stat. For IHC, moderate to excellent expression of vimentin was observed at timepoints for both decalcifiers. Optimal tissue sectioning and histological quality were achieved on incisor sections decalcified for 96 hours with Immunocal and 24 hours with Decal Stat.

Pd-C Catalytic Thin Films Prepared by Magnetron Sputtering for the Decomposition of Formic Acid

Formic acid is an advantageous liquid organic hydrogen carrier. It is relatively nontoxic and can be synthesized by the reaction of CO₂ with sustainable hydrogen or by biomass decomposition. As an alternative to more widely studied powdery catalysts, supported Pd-C catalytic thin films with controlled nanostructure and compositions were newly prepared in this work by magnetron sputtering on structured supports and tested for the formic acid decomposition reaction. A two-magnetron configuration (carbon and tailored Pd-C targets) was used to achieve a reduction in Pd consumption and high catalyst surface roughness and dispersion by increasing the carbon content. Activity and durability tests were carried out for the gas phase formic acid decomposition reaction on SiC foam monoliths coated with the Pd-C films and the effects of column width, surface roughness and thermal pre-reduction time were investigated. Activity of 5.04 mol_H2·g_Pd^-1·h^-1 and 92% selectivity to the dehydrogenation reaction were achieved at 300 °C for the catalyst with a lower column width and higher carbon content and surface roughness. It was also found that deactivation occurs when Pd is sintered due to the elimination of carbon and/or the segregation and agglomeration of Pd upon cycling. Magnetron sputtering deposition appears as a promising and scalable route for the one-step preparation of Pd-C catalytic films by overcoming the different deposition characteristics of Pd and C with an appropriate experimental design.

Reconstructed Bismuth-Based Metal-Organic Framework Nanofibers for Selective CO2 -to-Formate Conversion: Morphology Engineering

Electrochemical reduction of carbon dioxide (ERCO₂ ) is an attractive and sustainable approach to close the carbon loop. Formic acid is a high-value and readily collectible liquid product. However, the current reaction selectivity remains unsatisfactory. In this study, the bismuth-containing metal-organic framework CAU-17, with morphological variants of hexagonal prisms (CAU-17-hp) and nanofibers (CAU-17-fiber), is prepared at room temperature through a wet-chemical approach and employed as the electrocatalyst for highly selective CO₂ -to-formate conversion. An H₃ BTC-mediated morphology reconstruction is systematically investigated and further used to build a CAU-17-fiber hierarchical structure. The as-prepared CAU-17-fiber_400 electrodes give the best electrocatalytic performance in selective and efficient formate production with FE_HCOO- of 96.4 % and j_COOH- of 20.4 mA cm^-2 at -0.9 V_RHE . This work provides a new mild approach for synthesis and morphology engineering of CAU-17 and demonstrates the efficacy of morphology engineering in regulating the accessible surface area and promoting the activity of MOF-based materials for ERCO₂ .

Heterostructured Pd/Ti/Pd Thin Films as Highly Efficient Catalysts for Methanol and Formic Acid Oxidation

Finding a highly efficient catalyst for proton exchange membrane fuel cells is still the subject of extensive research. This article describes heterostructured Pd/Ti/Pd bimetallic thin films prepared using a strain-release technology as electrocatalysts for fuel cells. With their particular structure, these materials exhibit intriguing electrocatalytic activity toward the oxidation of both methanol and formic acid, yielding current densities of 0.17 and 0.56 A mg^-1_Pd, much superior to that of the commercial Pd black catalyst. Moreover, the Pd/Ti/Pd thin films display a low onset oxidation potential and extremely high current retention in both acidic and alkaline media. The carbon monoxide poisoning resistance is also significantly enhanced, thus contributing to ultrahigh stability in the long-term electrocatalytic processes. Their encouraging performance implies that such composites could be potential materials for energy conversion in the fuel cell field.

Sodium buffered formic acid concentration and feed pH is stable over a 3-month period

Promoting feed hygiene with organic acids is an effective method to prevent foodborne illnesses from bacterial infection. The stability and acidification of mash and pelleted feed with sodium buffered formic acid was investigated. The acid product was incorporated to reach total formate inclusion levels of 0, 6, or 12 g/kg for swine nursery feed; 0, 4, or 9 g/kg for swine finishing feed; and 0, 3, or 6 g/kg for broiler grower feed. Samples were analyzed for total formate and pH on d 4, 32, 60, or 88 post-manufacturing. The concentration of formate remained stable across an 88-d period (P < 0.01). Treatment with the formic acid product decreased feed pH with increasing inclusion levels (all P < 0.01). Within each inclusion level of acid and across time, pH tended to increase in pelleted feed and decrease in mash feeds (all P < 0.01); however, these changes were small (0.1 units pH). These data suggest that sodium buffered formic acid can be applied to both mash and pelleted feed to provide continuous acidification over a 3-month period.

Formic Acid as a Potential On-Board Hydrogen Storage Method: Development of Homogeneous Noble Metal Catalysts for Dehydrogenation Reactions

Hydrogen can be used as an energy carrier for renewable energy to overcome the deficiency of its intrinsically intermittent supply. One of the most promising application of hydrogen energy is on-board hydrogen fuel cells. However, the lack of a safe, efficient, convenient, and low-cost storage and transportation method for hydrogen limits their application. The feasibility of mainstream hydrogen storage techniques for application in vehicles is briefly discussed in this Review. Formic acid (FA), which can reversibly be converted into hydrogen and carbon dioxide through catalysis, has significant potential for practical application. Historic developments and recent examples of homogeneous noble metal catalysts for FA dehydrogenation are covered, and the catalysts are classified based on their ligand types. The Review primarily focuses on the structure-function relationship between the ligands and their reactivity and aims to provide suggestions for designing new and efficient catalysts for H₂ generation from FA.

HCOOH in the remote atmosphere: Constraints from Atmospheric Tomography (ATom) airborne observations

Formic acid (HCOOH) is an important component of atmospheric acidity but its budget is poorly understood, with prior observations implying substantial missing sources. Here we combine pole-to-pole airborne observations from the Atmospheric Tomography Mission (ATom) with chemical transport model (GEOS-Chem CTM) and back trajectory analyses to provide the first global in-situ characterization of HCOOH in the remote atmosphere. ATom reveals sub-100 ppt HCOOH concentrations over most of the remote oceans, punctuated by large enhancements associated with continental outflow. Enhancements correlate with known combustion tracers and trajectory-based fire influences. The GEOS-Chem model underpredicts these in-plume HCOOH enhancements, but elsewhere we find no broad indication of a missing HCOOH source in the background free troposphere. We conclude that missing non-fire HCOOH precursors inferred previously are predominantly short-lived. We find indications of a wet scavenging underestimate in the model consistent with a positive HCOOH bias in the tropical upper troposphere. Observations reveal episodic evidence of ocean HCOOH uptake, which is well-captured by GEOS-Chem; however, despite its strong seawater undersaturation HCOOH is not consistently depleted in the remote marine boundary layer. Over fifty fire and mixed plumes were intercepted during ATom with widely varying transit times and source regions. HCOOH:CO normalized excess mixing ratios in these plumes range from 3.4 to >50 ppt/ppb CO and are often over an order of magnitude higher than expected primary emission ratios. HCOOH is thus a major reactive organic carbon reservoir in the aged plumes sampled during ATom, implying important missing pathways for in-plume HCOOH production.

Divergent Paths, Same Goal: A Pair-Electrosynthesis Tactic for Cost-Efficient and Exclusive Formate Production by Metal-Organic-Framework-Derived 2D Electrocatalysts

Electrosynthesis of formic acid/formate is a promising alternative protocol to industrial processes. Herein, a pioneering pair-electrosynthesis tactic is reported for exclusively producing formate via coupling selectively electrocatalytic methanol oxidation reaction (MOR) and CO₂ reduction reaction (CO₂ RR), in which the electrode derived from Ni-based metal-organic framework (Ni-MOF) nanosheet arrays (Ni-NF-Af), as well as the Bi-MOF-derived ultrathin bismuthenes (Bi-enes), both obtained through an in situ electrochemical conversion process, are used as efficient anodic and cathodic electrocatalysts, respectively, achieving concurrent yielding of the same high-value product at both electrodes with greatly reduced energy input. The as-prepared Ni-NF-Af only needs quite low potentials to reach large current densities (e.g., 100 mA cm^-2 @1.345 V) with ≈100% selectivity for anodic methanol-to-formate conversion. Meanwhile, for CO₂ RR in the cathode, the as-prepared Bi-enes can simultaneously exhibit near-unity selectivity, large current densities, and good stability in a wide potential window toward formate production. Consequently, the coupled MOR//CO₂ RR system based on the distinctive MOF-derived catalysts displays excellent performance for pair-electrosynthesis of formate, delivering high current densities and nearly 100% selectivity for formate production in both the anode and the cathode. This work provides a novel way to design advanced MOF-derived electrocatalysts and innovative electrolytic systems for electrochemical production of value-added feedstocks.

Selective Production of Linear Aldehydes and Alcohols from Alkenes using Formic Acid as Syngas Surrogate

Performing carbonylation without the use of carbon monoxide for high-value-added products is an attractive yet challenging topic in sustainable chemistry. Herein, effective methods for producing linear aldehydes or alcohols selectively with formic acid as both carbon monoxide and hydrogen source have been described. Linear-selective hydroformylation of alkenes proceeds smoothly with up to 88 % yield and >30 regioselectivity in the presence of single Rh catalyst. Strikingly, introducing Ru into the system, the dual Rh/Ru catalysts accomplish efficient and regioselective hydroxymethylation in one pot. The present processes utilizing formic acid as syngas surrogate operate simply under mild condition, which opens a sustainable way for production of linear aldehydes and alcohols without the need for gas cylinders and autoclaves. As formic acid can be readily produced via CO₂ hydrogenation, the protocols represent indirect approaches for chemical valorization of CO₂ .

Engineering Bismuth-Tin Interface in Bimetallic Aerogel with a 3D Porous Structure for Highly Selective Electrocatalytic CO2 Reduction to HCOOH

Electrochemical reduction of CO₂ (CO₂ RR) into valuable hydrocarbons is appealing in alleviating the excessive CO₂ level. We present the very first utilization of metallic bismuth-tin (Bi-Sn) aerogel for CO₂ RR with selective HCOOH production. A non-precious bimetallic aerogel of Bi-Sn is readily prepared at ambient temperature, which exhibits 3D morphology with interconnected channels, abundant interfaces and a hydrophilic surface. Superior to Bi and Sn, the Bi-Sn aerogel exposes more active sites and it has favorable mass transfer properties, which endow it with a high FE_HCOOH of 93.9 %. Moreover, the Bi-Sn aerogel achieves a FE_HCOOH of ca. 90 % that was maintained for 10 h in a flow battery. In situ ATR-FTIR measurements confirmed that the formation of *HCOO is the rate-determining step toward formic acid generation. DFT demonstrated the coexistence of Bi and Sn optimized the energy barrier for the production of HCOOH, thereby improving the catalytic activity.

Bi-Sn Oxides for Highly Selective CO2 Electroreduction to Formate in a Wide Potential Window

The electroreduction of CO₂ into the highly value-added fuel formic acid (HCOOH) has been considered an ideal approach to convert renewable energy and mitigate environmental crisis. SnO₂ electrode is one of the promising candidates to electrocatalytically convert CO₂ to HCOOH, but its poor stability limits its future development and application. In this study, highly stable SnO₂ /Bi₂ O₃ oxide catalysts are obtained by distributing SnO₂ nanoparticles on the surface of Bi₂ O₃ sheets. The XPS spectra revealed an interfacial electronic transportation from Bi₂ O₃ sheets to SnO₂ nanoparticles, which made SnO₂ rich of electrons. The strong interfacial interaction protected the active sites of SnO₂ from self-reduction in CO₂ electroreduction reaction (CO₂ RR), stabilizing SnO₂ species in the composite catalyst even after long-term usage. Calculations based on density functional theory signified that the presence of Bi₂ O₃ favored the adsorption of HCOO* intermediate, improved the CO₂ conversion into HCOOH on SnO₂ /Bi₂ O₃ interface. As a result, the SnO₂ /Bi₂ O₃ catalyst attained high performance on CO₂ RR (the highest FE C 1 value of 90 % at -1.0 V vs. RHE), suppressing H₂ evolution reaction (HER) at high potentials. In particular, the selectivity of HCOOH remained above 76 % in a wide potential window (from -1.0 to -1.4 V vs. RHE) and a long duration (12 h).

Role of Intermolecular Interactions in the Catalytic Reaction of Formic Acid on Cu(111)

Formic acid (HCOOH) can be catalytically decomposed into H₂ and CO₂ and is a promising hydrogen storage material. As H₂ production catalysts, Cu surfaces allow selective HCOOH decarboxylation; however, the on-surface HCOOH decomposition reaction pathway remains controversial. In this study, the temperature dependence of the HCOOH/Cu(111) adsorption structures is elucidated by scanning tunneling microscopy and non-contact atomic force microscopy, establishing the adsorbate chemical species using density functional theory. 2D HCOOH islands at 80 K, linear chains of HCOOH and monodentate formate at 150 K, chain-like assemblies of monodentate and bidentate formate at 200 K, and bidentate formate clusters at 300 K are observed. At each temperature, the adsorbates experience attractive interactions among themselves. Such aggregation stabilizes them against desorption and decomposition. Thus, accurate evaluation of intermolecular interactions is essential to understand catalytic reactivity.

Construction of Flexible Amine-linked Covalent Organic Frameworks by Catalysis and Reduction of Formic Acid via the Eschweiler-Clarke Reaction

Compared to the current mainstream rigid covalent organic frameworks (COFs) linked by imine bonds, flexible COFs have certain advantages of elasticity and self-adaptability, but their construction and application are greatly limited by the complexity in synthesis and difficulty in obtaining regular structure. Herein, we reported for the first time a series of flexible amine-linked COFs with high crystallinity synthesized by formic acid with unique catalytic and reductive bifunctional properties, rather than acetic acid, the most common catalyst for COF synthesis. The reaction mechanism was demonstrated to be a synchronous in situ reduction during the formation of imine bond. The flexibilities of the products endow them with accommodative adaptability to guest molecules, thus increasing the adsorption capacities for nitrogen and iodine by 27 % and 22 %, respectively. Impressively, a novel concept of flexibilization degree was proposed firstly, which provides an effective approach to rationally measure the flexibility of COFs.

Boosting Production of HCOOH from CO2 Electroreduction via Bi/CeOx

Formic acid (HCOOH) is one of the most promising chemical fuels that can be produced through CO₂ electroreduction. However, most of the catalysts for CO₂ electroreduction to HCOOH in aqueous solution often suffer from low current density and limited production rate. Herein, we provide a bismuth/cerium oxide (Bi/CeO_x ) catalyst, which exhibits not only high current density (149 mA cm^-2 ), but also unprecedented production rate (2600 μmol h^-1  cm^-2 ) with high Faradaic efficiency (FE, 92 %) for HCOOH generation in aqueous media. Furthermore, Bi/CeO_x also shows favorable stability over 34 h. We hope this work could offer an attractive and promising strategy to develop efficient catalysts for CO₂ electroreduction with superior activity and desirable stability.

Band Gap Engineering in Solvochromic 2D Covalent Organic Framework Photocatalysts for Visible Light-Driven Enhanced Solar Fuel Production from Carbon Dioxide

Solar light-driven fuel production from carbon dioxide using organic photocatalysts is a promising technique for sustainable energy sources. Band gap engineering in sustainable organic photocatalysts for improving efficiency and fulfilling the requirements is highly anticipated. Here, we present a new strategy to engineer the band gap in covalent organic framework (COF) photocatalysts by varying the push-pull electronic effect. To implement this strategy, we have designed and synthesized four different COFs using a tripodal amine 4,4',4″-(1,3,5-triazine-2,4,6-triyl)tris(([1,1'-biphenyl]-4-amine)) [Ttba] with 1,3,5-triformylbenzene (COF-1), 2,4,6-triformylphloroglucinol (COF-2), 2,4,6-triformylphenol (COF-3), and 2,4,6-triformylresorcinol (COF-4). On varying the number of hydroxyl units in the aldehyde precursor, the resulting COFs allow the fine-tuning of their band gap and band edge positions and result in different morphologies with varying surface areas. The enhanced optical properties of COF-3 and COF-4 with very suitable band gaps of 2.02 and 1.95 eV, respectively, enable them to demonstrate a high-efficiency photobiocatalytic system for NADH photoregeneration and enhanced visible light-driven formic acid production at a rate of 226.3 μmol g^-1 in 90 min. The triazine core enables efficient charge separation, while the hydroxyl groups induce an electronic push-pull effect, regulating their photocatalytic efficiency. The results demonstrated the morphology-guided enhanced surface area and dual keto-enol tautomerism-induced push-pull effect in asymmetrical charge distribution as key features in the fine-tuning of the photocatalysts.

Lignin Extraction from Waste Pine Sawdust Using a Biomass Derived Binary Solvent System

Lignocellulosic biomass fractionation is typically performed using methods that are somehow harsh to the environment, such as in the case of kraft pulping. In recent years, the development of new sustainable and environmentally friendly alternatives has grown significantly. Among the developed systems, bio-based solvents emerge as promising alternatives for biomass processing. Therefore, in the present work, the bio-based and renewable chemicals, levulinic acid (LA) and formic acid (FA), were combined to fractionate lignocellulosic waste (i.e., maritime pine sawdust) and isolate lignin. Different parameters, such as LA:FA ratio, temperature, and extraction time, were optimized to boost the yield and purity of extracted lignin. The LA:FA ratio was found to be crucial regarding the superior lignin extraction from the waste biomass. Moreover, the increase in temperature and extraction time enhances the amount of extracted residue but compromises the lignin purity and reduces its molecular weight. The electron microscopy images revealed that biomass samples suffer significant structural and morphological changes, which further suggests the suitability of the newly developed bio-fractionation process. The same was concluded by the FTIR analysis, in which no remaining lignin was detected in the cellulose-rich fraction. Overall, the novel combination of bio-sourced FA and LA has shown to be a very promising system for lignin extraction with high purity from biomass waste, thus contributing to extend the opportunities of lignin manipulation and valorization into novel added-value biomaterials.

Growth on Formic Acid Is Dependent on Intracellular pH Homeostasis for the Thermoacidophilic Methanotroph Methylacidiphilum sp. RTK17.1

Members of the genus Methylacidiphilum, a clade of metabolically flexible thermoacidophilic methanotrophs from the phylum Verrucomicrobia, can utilize a variety of substrates including methane, methanol, and hydrogen for growth. However, despite sequentially oxidizing methane to carbon dioxide via methanol and formate intermediates, growth on formate as the only source of reducing equivalents (i.e., NADH) has not yet been demonstrated. In many acidophiles, the inability to grow on organic acids has presumed that diffusion of the protonated form (e.g., formic acid) into the cell is accompanied by deprotonation prompting cytosolic acidification, which leads to the denaturation of vital proteins and the collapse of the proton motive force. In this work, we used a combination of biochemical, physiological, chemostat, and transcriptomic approaches to demonstrate that Methylacidiphilum sp. RTK17.1 can utilize formate as a substrate when cells are able to maintain pH homeostasis. Our findings show that Methylacidiphilum sp. RTK17.1 grows optimally with a circumneutral intracellular pH (pH 6.52 ± 0.04) across an extracellular range of pH 1.5–3.0. In batch experiments, formic acid addition resulted in no observable cell growth and cell death due to acidification of the cytosol. Nevertheless, stable growth on formic acid as the only source of energy was demonstrated in continuous chemostat cultures (D = 0.0052 h⁻¹, t_d = 133 h). During growth on formic acid, biomass yields remained nearly identical to methanol-grown chemostat cultures when normalized per mole electron equivalent. Transcriptome analysis revealed the key genes associated with stress response: methane, methanol, and formate metabolism were differentially expressed in response to growth on formic acid. Collectively, these results show formic acid represents a utilizable source of energy/carbon to the acidophilic methanotrophs within geothermal environments. Findings expand the known metabolic flexibility of verrucomicrobial methanotrophs to include organic acids and provide insight into potential survival strategies used by these species during methane starvation.

An Anthracene-Based Metal-Organic Framework for Selective Photo-Reduction of Carbon Dioxide to Formic Acid Coupled with Water Oxidation

A Zr-based metal-organic framework has been synthesized and employed as a catalyst for photochemical carbon dioxide reduction coupled with water oxidation. The catalyst shows significant carbon dioxide reduction property with concomitant water oxidation. The catalyst has broad visible light as well as UV light absorption property, which is further confirmed from electronic absorption spectroscopy. Formic acid was the only reduced product from carbon dioxide with a turn-over frequency (TOF) of 0.69 h^-1 in addition to oxygen, which was produced with a TOF of 0.54 h^-1 . No external photosensitizer is used and the ligand itself acts as the light harvester. The efficient and selective photochemical carbon dioxide reduction to formic acid with concomitant water oxidation using Zr-based MOF as catalyst is thus demonstrated here.

Preparation and Biocompatibility Characterization of Silk Fibroin 3D Scaffolds

In this paper, three different mass fractions of sodium carbonate were used for degumming to obtain different degrees of damaged silk fibroin fibers, which were then treated with formic acid to shrink and bond them into 3D scaffolds. The structure and performance of silk fibroin fibers and silk fibroin 3D scaffolds were characterized by scanning electron microscopy, infrared spectroscopy, X-ray diffraction, a differential thermal scanner, a universal materials testing machine, and laser confocal microscopy, and the degradation performance was tested by protease degradation. The results showed that an excessive mass fraction of sodium carbonate would cause partial hydrolysis of fibroin fibers, decrease the mechanical properties of fibroin fiber, increase the surface roughness of fibroin fibers, and make mouse embryonic fibroblasts easier to adhere and grow. Silk fibroin fibers were slightly dissolved, shrunk, and dispersed in formic acid. The mass fraction of sodium carbonate can adjust the enzymatic degradation rate of the silk fibroin 3D scaffolds. With the extension of the degradation time, minerals will be deposited on the surface of the scaffolds. The results show that the silk fibroin 3D scaffolds have biocompatibility, mechanical properties, and degradability, which provides a good material for a barrier biofilm in the future.

Nickel Iron Diselenide for Highly Efficient and Selective Electrocatalytic Conversion of Methanol to Formate

The electro-oxidation of methanol to formate is an interesting example of the potential use of renewable energies to add value to a biosourced chemical commodity. Additionally, methanol electro-oxidation can replace the sluggish oxygen evolution reaction when coupled to hydrogen evolution or to the electroreduction of other biomass-derived intermediates. But the cost-effective realization of these reaction schemes requires the development of efficient and low-cost electrocatalysts. Here, a noble metal-free catalyst, Ni_{1- x} Fe_x Se₂ nanorods, with a high potential for an efficient and selective methanol conversion to formate is demonstrated. At its optimum composition, Ni_0.75 Fe_0.25 Se₂ , this diselenide is able to produce 0.47 mmol cm^-2  h^-1 of formate at 50 mA cm^-2 with a Faradaic conversion efficiency of 99%. Additionally, this noble-metal-free catalyst is able to continuously work for over 50 000 s with a minimal loss of efficiency, delivering initial current densities above 50 mA cm^-2 and 2.2 A mg^-1 in a 1.0 m KOH electrolyte with 1.0 m methanol at 1.5 V versus reversible hydrogen electrode. This work demonstrates the highly efficient and selective methanol-to-formate conversion on Ni-based noble-metal-free catalysts, and more importantly it shows a very promising example to exploit the electrocatalytic conversion of biomass-derived chemicals.

Formic Acid-Assisted Selective Hydrogenolysis of 5-Hydroxymethylfurfural to 2,5-Dimethylfuran over Bifunctional Pd Nanoparticles Supported on N-Doped Mesoporous Carbon

Biomass‐derived 5‐hydroxymethylfurfural (HMF) is regarded as one of the most promising platform chemicals to produce 2,5‐dimethylfuran (DMF) as a potential liquid transportation fuel. Pd nanoparticles supported on N‐containing and N‐free mesoporous carbon materials were prepared, characterized, and applied in the hydrogenolysis of HMF to DMF under mild reaction conditions. Quantitative conversion of HMF to DMF was achieved in the presence of formic acid (FA) and H₂ over Pd/NMC within 2 h. The reaction mechanism, especially the multiple roles of FA, was explored through a detailed comparative study by varying hydrogen source, additive, and substrate as well as by applying in situ ATR‐IR spectroscopy. The major role of FA is to shift the dominant reaction pathway from the hydrogenation of the aldehyde group to the hydrogenolysis of the hydroxymethyl group via the protonation by FA at the C‐OH group, lowering the activation barrier of the C−O bond cleavage and thus significantly enhancing the reaction rate. XPS results and DFT calculations revealed that Pd²⁺ species interacting with pyridine‐like N atoms significantly enhance the selective hydrogenolysis of the C−OH bond in the presence of FA due to their high ability for the activation of FA and the stabilization of H⁻.

Highly Efficient and Selective CO2 Electro-Reduction to HCOOH on Sn Particle-Decorated Polymeric Carbon Nitride

Electrochemical conversion of CO₂ into liquid fuels by efficient and earth-abundant catalysts is of broad interest but remains a great challenge in renewable energy production and environmental remediation. Herein, a Sn particle-decorated polymeric carbon nitride (CN) electrocatalyst was successfully developed for efficient, durable, and highly selective CO₂ reduction to formic acid. High-resolution X-ray photoelectron spectroscopy confirmed that the metallic Sn particles and CN matrix are bound by strong chemical interaction, rendering the composite catalyst a stable structure. More notably, the electronic structure of Sn was well tuned to be highly electron-rich due to the electron transfer from N atoms of CN to Sn atoms via metal-support interactions, which favored the adsorption and activation of CO₂ molecules, promoted charge transport, and thus enhanced the electrochemical conversion of CO₂ . The composite electrocatalyst demonstrated an excellent Faradaic efficiency of formic acid (FE_HCOOH ) up to 96±2 % at the potential of -0.9 V vs. reversible hydrogen electrode, which remained at above 92 % during the electrochemical reaction of 10 h, indicating that the present Sn particle-decorated polymeric carbon nitride electrocatalyst is among the best in comparison with reported Sn-based electrocatalysts.

The Influence of Carbon Nature on the Catalytic Performance of Ru/C in Levulinic Acid Hydrogenation with Internal Hydrogen Source

The influence of the nature of carbon materials used as a support for Ru/C catalysts on levulinic acid hydrogenation with formic acid as a hydrogen source toward gamma-valerolactone was investigated. It has been shown that the physicochemical properties of carbon strongly affect the catalytic activity of Ru catalysts. The relationship between the hydrogen mobility, strength of hydrogen adsorption, and catalytic performance was established. The catalyst possessing the highest number of defects, stimulating metal support interaction, exhibited the highest activity. The effect of the catalyst grain size was also studied. It was shown that the decrease in the grain size resulted in the formation of smaller Ru crystallites on the catalyst surface, which facilitates the activity.