Survival of formalin intoxication in a 13-year-old Thoroughbred gelding

BACKGROUND

Formalin intoxication via the gastrointestinal route has not been previously reported in the horse. Whereas ingestion of formalin in humans, although rare, is well documented. Majority of human cases are either accidental, suicidal or homicidal and often lead to fatality, with a reported lethal formaldehyde dose equating to 0.12 - 0.16 g/kg bwt.

OBJECTIVES

To describe a single case report of the clinical management of an adult horse referred to a veterinary teaching hospital following accidental administration of 10% formalin via nasogastric tube.

METHODS

A 13-year-old Thoroughbred gelding originally presented to the referring veterinarian for colic where 1.8 L of 10% formalin was accidentally administered instead of mineral oil via nasogastric intubation, a potentially lethal dose of formaldehyde (0.12 g/kg bwt). Approximately 20-hours following 10% formalin administration the horse was admitted to the referral hospital with moderate tachycardia, occasional ectopic beats, tacky and hyperaemic mucous membranes, delayed capillary refill time, reduced borborygmi, and pronounced digital pulses. Diagnostic investigations included laboratory blood analysis, urinalysis, electrocardiogram, abdominal ultrasound, palpation per rectum and gastroscopy.

RESULTS

Patient assessment found evidence of toxicity to the gastrointestinal tract, hypovolaemia and risk for laminitis. Intensive care included fluid and electrolyte therapy, anti-inflammatories and analgesia, continuous digital cryotherapy, gastro-protectants and other methods of gastrointestinal support. The horse was discharged from hospital on day 14 with no long-term complications and the client-veterinarian relationship was preserved.

DISCUSSION

In human cases of ingestion, gastrointestinal injury is typically accompanied by severe metabolic acidosis and multiple organ dysfunction syndrome due to toxicity of other body systems that can contribute to non-survival. Formaldehyde toxicity in the present case predominantly affected the gastrointestinal tract, most likely a direct result of the route of administration. Aside from gastrointestinal injury, primary toxicity of other body systems was not confirmed. To prevent this medical error recurring, the referring veterinary clinic revised their labelling and storage of 10% formalin.

CONCLUSION

This is the first report of systemic formalin intoxication in the horse. Following a high dose of 10% formalin (0.12 g/kg bwt formaldehyde) enterally, the horse survived having received intensive supportive care based on human guidelines for ingested formalin.

Recent research progresses of Sn/Bi/In-based electrocatalysts for electroreduction CO2 to formate

Carbon dioxide electroreduction reaction (CO2RR) can take full advantage of sustainable power to reduce the continuously increasing carbon emissions. Recycling CO2 to produce formic acid or formate is a technologically and economically viable route to accomplish CO2 cyclic utilization. Developing efficient and cost-effective electrocatalysts with high selectivity towards formate is prioritized for the industrialized applications of CO2RR electrolysis. From the previous explored CO2RR catalysts, Sn, Bi and In based materials have drawn increasing attentions due to the high selectivity towards formate. However, there are still confronted with several challenges for the practical applications of these materials. Therefore, a rational design of the catalysts for formate is urgently needed for the target of industrialized applications. Herein, we comprehensively summarized the recent development in the advanced electrocatalysts for the CO2RR to formate. Firstly, the reaction mechanism of CO2RR is introduced. Then the preparation and design strategies of the highly active electrocatalysts are presented. Especially the innovative design mechanism in engineering materials for promoting catalytic performance, and the efforts on mechanistic exploration using in situ (ex situ) characterization techniques are reviewed. Subsequently, some perspectives and expectations are proposed about current challenges and future potentials in CO2RR research.

Corrosion Engineering of Part-Per-Million Single Atom Pt1/Ni(OH)2 Electrocatalyst for PET Upcycling at Ampere-Level Current Density

The plastic waste issue has posed a series of formidable challenges for the ecological environment and human health. While conventional recycling strategies often lead to plastic down-cycling, the electrochemical strategy of recovering valuable monomers enables an ideal, circular plastic economy. Here a corrosion synthesized single atom Pt1/Ni(OH)2 electrocatalyst with part-per-million noble Pt loading for highly efficient and selective upcycling of polyethylene terephthalate (PET) into valuable chemicals (potassium diformate and terephthalic acid) and green hydrogen is reported. Electro-oxidation of PET hydrolysate, ethylene glycol (EG), to formate is processed with high Faraday efficiency (FE) and selectivity (>90%) at the current density close to 1000 mA cm-2 (1.444 V vs RHE). The in situ spectroscopy and density functional theory calculations provide insights into the mechanism and the understanding of the high efficiency. Remarkably, the electro-oxidation of EG at the ampere-level current density is also successfully illustrated by using a membrane-electrode assembly with high FEs to formate integrated with hydrogen production for 500 h of continuous operation. This process allows valuable chemical production at high space-time yield and is highly profitable (588-700 $ ton-1 PET), showing an industrial perspective on single-atom catalysis of electrochemical plastic upcycling.

Interfacial Electronic Interaction in Amorphous-Crystalline CeOx -Sn Heterostructures for Optimizing CO2 to Formate Conversion

Formate, a crucial chemical raw material, holds significant promise for industrial applications in the context of CO2 electroreduction reaction (CO2 RR). Despite its potential, challenges, such as poor selectivity and low formation rate at high current densities persist, primarily due to the competing hydrogen evolution reaction (HER) and high energy barriers associated with *OCHO intermediate generation. Herein, one-step chemical co-reduction strategy is employed to construct an amorphous-crystalline CeOx -Sn heterostructure, demonstrating remarkable catalytic performance in converting CO2 to formate. The optimized CeOx -Sn heterostructures reach a current density of 265.1 mA cm-2 and a formate Faraday efficiency of 95% at -1.07 V versus RHE. Especially, CeOx -Sn achieves a formate current density of 444.4 mA cm-2 and a formate production rate of 9211.8 µmol h-1  cm-2 at -1.67 V versus RHE, surpassing most previously reported materials. Experimental results, coupled with （density functional theory）DFT calculations confirm that robust interface interaction between CeOx and Sn active center induces electron transfer from crystalline Sn site to amorphous CeOx , some Ce4+ of CeOx get electrons and convert to unsaturated Ce3+ , optimizing the electronic structure of active Sn. This amorphous-crystalline heterostructure promotes electron transfer during CO2 RR, reducing the energy barrier formed by *OCHO intermediates, and thus achieving efficient reduction of CO2 to formate.

Amorphous ZnSnOx Hollow Spheres Enable Highly Efficient CO2 Reduction

Carbon dioxide (CO2) adsorption and electron transport play an important role in CO2 reduction reaction (CO2RR). Herein, we have demonstrated a new class of diverse hollow ZnSnOx (ZSO) through the amorphization of hydroxides to enhance CO2 adsorption and accelerate electron transport. The amorphization is occurred by calcination process, as indicated by Fourier transform infrared spectroscopy and Raman spectra. In particular, the ZnSnOx hollow spheres (ZSO HSs) achieve a high Faradaic efficiency (FE) of HCOOH up to 92.7% at best, outperforming the commercial ZSO (Comm. ZSO, 83.9%). ZSO HSs also exhibit durable stability with negligible activity decay after 10 h of successive electrolysis. In-situ attenuated total reflectance infrared absorption spectroscopy further reveals strong adsorption of CO2 and rapid intermediate configuration transformation in amorphous ZSO HSs. This work demonstrates the practical application of ZSO for CO2RR and provides a new insight to create efficient CO2RR electrocatalysts.

Metal-Organic Framework Derived Bi-O-Sn/C Nanostructure: Tailoring the Adsorption Site of Dominant Intermediate for Highly Efficient CO2 Electroreduction to Formate

Electrochemical CO2 reduction into high-value-added formic acid/formate is an attractive strategy to mitigate global warming and achieve energy sustainability. However, the adsorption energy of most catalysts for the key intermediate *OCHO is usually weak, and how to rationally optimize the adsorption of *OCHO is challenging. Here, an effective Bi-Sn bimetallic electrocatalyst (Bi1 -O-Sn1 @C) where a Bi-O-Sn bridge-type nanostructure is constructed with O as an electron bridge is reported. The electronic structure of Sn is precisely tuned by electron transfer from Bi to Sn through O bridge, resulting in the optimal adsorption energy of intermediate *OCHO on the surface of Sn and the enhanced activity for formate production. Thus, the Bi1 -O-Sn1 @C exhibits an excellent Faradaic efficiency (FE) of 97.7% at -1.1 V (vs RHE) for CO2 reduction to formate (HCOO- ) and a high current density of 310 mA cm-2 at -1.5 V, which is one of the best results catalyzed by Bi- and Sn-based catalysts reported previously. Impressively, the FE exceeds 93% at a wide potential range from -0.9 to -1.4 V. In-situ ATR-FTIR, in-situ Raman, and DFT calculations confirm the unique role of the bridge-type structure of Bi-O-Sn in highly efficient electrocatalytic reduction of CO2 into formate.

Anion-Mediated In Situ Reconstruction of the Bi2MoO6 Precatalyst for Enhanced Electrochemical CO2 Reduction over a Wide Potential Window

Electrochemical CO2 reduction reaction (eCO2RR) is a viable approach to achieve carbon neutrality. Bismuth-based electrocatalysts demonstrate exceptional selectivity in CO2-to-formate conversion, but their reconstruction mechanisms during the eCO2RR remain elusive. Herein, the reconstruction processes of bismuth molybdate (Bi2MoO6) nanoplates are elucidated during the eCO2RR. Operando and ex situ measurements reveal the in situ partial reduction of Bi2MoO6 to Bi metal, forming Bi@Bi2MoO6 at negative potentials. Meanwhile, CO32- ions in the electrolyte spontaneously exchange with MoO42- in Bi2MoO6. The obtained Bi@Bi2MoO6/Bi2O2CO3 delivers a formate Faradaic efficiency (FE) of 95.2% at -1.0 V. Notably, high formate FEs (>90%) are maintained within a wide 500 mV window. Although computational calculations indicate a higher energy barrier for *OCHO formation on Bi2O2CO3, the prevention of excessive reduction to metal Bi significantly enhances long-term stability. Furthermore, the CO32- ion exchange process occurs in various 2D Bi-containing precatalysts, which should be emphasized in further studies.

Functionally redundant formate dehydrogenases enable formate-dependent growth in Methanococcus maripaludis

Methanogens are essential for the complete remineralization of organic matter in anoxic environments. Most cultured methanogens are hydrogenotrophic, using H2 as an electron donor to reduce CO2 to CH4, but in the absence of H2 many can also use formate. Formate dehydrogenase (Fdh) is essential for formate oxidation, where it transfers electrons for the reduction of coenzyme F420 or to a flavin-based electron bifurcating reaction catalyzed by heterodisulfide reductase (Hdr), the terminal reaction of methanogenesis. Furthermore, methanogens that use formate encode at least two isoforms of Fdh in their genomes, but how these different isoforms participate in methanogenesis is unknown. Using Methanococcus maripaludis, we undertook a biochemical characterization of both Fdh isoforms involved in methanogenesis. Both Fdh1 and Fdh2 interacted with Hdr to catalyze the flavin-based electron bifurcating reaction, and both reduced F420 at similar rates. F420 reduction preceded flavin-based electron bifurcation activity for both enzymes. In a Δfdh1 mutant background, a suppressor mutation was required for Fdh2 activity. Genome sequencing revealed that this mutation resulted in the loss of a specific molybdopterin transferase (moeA), allowing for Fdh2-dependent growth, and the metal content of the proteins suggested that isoforms are dependent on either molybdenum or tungsten for activity. These data suggest that both isoforms of Fdh are functionally redundant, but their activities in vivo may be limited by gene regulation or metal availability under different growth conditions. Together these results expand our understanding of formate oxidation and the role of Fdh in methanogenesis.

Surface-Enhanced Raman Spectroscopy for Boosting Electrochemical CO2 Reduction on Amorphous-Surfaced Tin Oxide Supported by MXene

Amorphous materials disrupt the intrinsic linear scalar dependence seen in their crystalline counterparts, typically exhibiting enhanced catalytic characteristics. Nevertheless, substantial obstacles remain in terms of boosting their stability, enhancing their conductivity, and elucidating distinct catalytic mechanisms. Herein, a core-shell catalyst, comprising a crystalline SnO2 core and an amorphous SnOx shell supported on MXene (denoted as SnO2@SnOx/MXene), was prepared utilizing hydrothermal and solution reduction methods. The SnO2@SnOx/MXene catalyst excels in the electrocatalytic conversion of CO2 to formate, yielding a Faradaic efficiency (FE) as high as 93% for formate production at -1.17 V vs RHE and demonstrating exceptional durability. Both density functional theory (DFT) calculations and experimental results indicate that the SnOx shell bolsters formate formation by fine-tuning the adsorption energy of the *OCHO intermediate. In SnO2@SnOx/MXene, MXene plays a vital role in enhancing the conductivity and stability of the amorphous shell and especially amplifying Raman signals of catalyst components. The ex/in situ surface-enhanced Raman scattering (SERS) application further confirms the formation of amorphous SnOx and further enables the direct detection of the formation of the intermediate species. This work provides the basis for the application of amorphous materials in practical electrocatalytic reduction of CO2 reduction.

Constructing Asymmetric Charge Polarized NiCo Prussian Blue Analogue for Promoted Electrocatalytic Methanol to Formate Conversion

The highly selective electrochemical conversion of methanol to formate is of great significance for various clean energy devices, but understanding the structure-to-property relationship remains unclear. Here, the asymmetric charge polarized NiCo prussian blue analogue (NiCo PBA-100) is reported to exhibit remarkable catalytic performance with high current density (210 mA cm-2 @1.65 V vs RHE) and Faraday efficiency (over 90%). Meanwhile, the hybrid water splitting and Zinc-methanol-battery assembled by NiCo PBA-100 display the promoted performance with decent stability. X-ray absorption spectroscopy (XAS) and operando Raman spectroscopy indicate that the asymmetric charge polarization in NiCo PBA leads to more unoccupied states of Ni and occupied states of Co, thereby facilitating the rapid transformation of the high-active catalytic centers. Density functional theory calculations combining operando Fourier transform infrared spectroscopy demonstrate that the final reconstructed catalyst derived by NiCo PBA-100 exhibits rearranged d band properties along with a lowered energy barrier of the rate-determining step and favors the desired formate production.

High Formate Selectivity and Deactivation Mechanism of CuS Nanoparticles in CO2 Electrocatalytic Reduction Reaction

CO2 electroreduction into liquid fuels is of broad interest and benefits reducing the energy crisis and environment burdens. CuS has been reported to be a desirable candidate for CO2 electroreduction into formate; however, its formate selectivity and stability are still far from the demands of practical application. Herein, we report CuS nanoparticles exhibiting good Faradaic efficiency of formate (about 98 %) in CO2 electroreduction and its deactivation mechanism during the reaction. The deactivation of CuS was found to be associated with the reconstruction and S loss of CuS, which deteriorates the Faradaic efficiency of formate. Combined with ionic and gas analyses, the S atom in CuS was lost in the form of H2 S, SO2 , and SO4 2- , followed by the reconstruction of CuS into copper oxides. Such a catalyst reconstruction facilitates electroreductions of CO2 and H2 O, respectively, into CO and H2 , etc., resulting in the degradation of catalytical performance of CO2 electroreduction into formate. This work reveals the important role of S loss and reconstruction of metal sulfide catalysts during the electroreduction reaction, which may benefit the further development of CuS-based electro-catalyst for CO2 electroreduction.

Formate Supplementation Enhances Antitumor CD8+ T-cell Fitness and Efficacy of PD-1 Blockade

The tumor microenvironment (TME) restricts antitumor CD8+ T-cell function and immunotherapy responses. Cancer cells compromise the metabolic fitness of CD8+ T cells within the TME, but the mechanisms are largely unknown. Here we demonstrate that one-carbon (1C) metabolism is enhanced in T cells in an antigen-specific manner. Therapeutic supplementation of 1C metabolism using formate enhances CD8+ T-cell fitness and antitumor efficacy of PD-1 blockade in B16-OVA tumors. Formate supplementation drives transcriptional alterations in CD8+ T-cell metabolism and increases gene signatures for cellular proliferation and activation. Combined formate and anti-PD-1 therapy increases tumor-infiltrating CD8+ T cells, which are essential for enhanced tumor control. Our data demonstrate that formate provides metabolic support to CD8+ T cells reinvigorated by anti-PD-1 to overcome a metabolic vulnerability in 1C metabolism in the TME to further improve T-cell function.

SIGNIFICANCE

This study identifies that deficiencies in 1C metabolism limit the efficacy of PD-1 blockade in B16-OVA tumors. Supplementing 1C metabolism with formate during anti-PD-1 therapy enhances CD8+ T-cell fitness in the TME and CD8+ T-cell-mediated tumor clearance. These findings demonstrate that formate supplementation can enhance exhausted CD8+ T-cell function. See related commentary by Lin et al., p. 2507. This article is featured in Selected Articles from This Issue, p. 2489.

Folate trapping is lethal to cancer cells

Regulation of formate flux by a key folate enzyme, MTHFD2 (methylene tetrahydrofolate dehydrogenase 2) in cancer cells remains poorly understood. Green et al. (Nature Metabolism, 2023; 5: 642-659) showed an interesting phenomenon of "folate trapping" toxicity leads to cancer cell kill using a potent inhibitor (TH9619) against the dehydrogenase and cyclohydrolase (DC) activities of cytosolic methylenetetrahydrofolate dehydrogenase 1 (cMTHFD1) and nuclear methylenetetrahydrofolate dehydrogenase 2 (nMTHFD2), but not the mitochondrial MTHFD2 (mTHFD2). But, mMTHFD2 is required for formate flow to cytosol which leads to the trapping of 10-formyl tetrahydrofolate and causes toxicity by TH9619 treatment, to kill cancer cells expressing mMTHFD2. This article opens new avenues to be evaluated for therapeutic benefits of cancer patients where MTHFD2 shows overexpression viz-a-viz breast, prostate, colorectal, acute myeloid leukemia, and other cancer types.

In vitro interactions between Blautia hydrogenotrophica, Desulfovibrio piger and Methanobrevibacter smithii under hydrogenotrophic conditions

Methanogens, reductive acetogens and sulfate-reducing bacteria play an important role in disposing of hydrogen in gut ecosystems. However, how they interact with each other remains largely unknown. This in vitro study cocultured Blautia hydrogenotrophica (reductive acetogen), Desulfovibrio piger (sulfate reducer) and Methanobrevibacter smithii (methanogen). Results revealed that these three species coexisted and did not compete for hydrogen in the early phase of incubations. Sulfate reduction was not affected by B. hydrogenotrophica and M. smithii. D. piger inhibited the growth of B. hydrogenotrophica and M. smithii after 10 h incubations, and the inhibition on M. smithii was associated with increased sulfide concentration. Remarkably, M. smithii growth lag phase was shortened by coculturing with B. hydrogenotrophica and D. piger. Formate was rapidly used by M. smithii under high acetate concentration. Overall, these findings indicated that the interactions of the hydrogenotrophic microbes are condition-dependent, suggesting their interactions may vary in gut ecosystems.

Boron Dopant Modulated Electron Localization of Tin Oxide for Efficient Electrochemical CO2 Reduction to Formate

Sn-based electrocatalysts have great economic potential in the reduction of CO2 to HCOOH, while they still suffer from low current density, dissatisfactory selectivity, and poor stability. Inspired by electronic modification engineering, boron-doped SnO2 nanospheres (B-SnO2 ) are successfully synthesized to achieve high-efficiency CO2 reduction reaction (CO2 RR). It is found that the introduction of boron dopants can increase the number of active sites and facilitate the formation of the electron-rich Sn sites in its structure, thus enhancing the activation of CO2 molecules and reducing the energy barrier of *OCHO intermediates on the SnO2 surface. Thus, the B-doped SnO2 electrocatalyst exhibits a remarkable FEHCOOH above 90% within a broad potential window of -0.7 to -1.3 V versus reversible hydrogen electrode (RHE) (600 mV) and obtains the maximum value of 95.1% (the partial current density of HCOOH is 42.35 mA cm-2 ) at -1 V versus RHE. In conclusion, this work provides a novel strategy for optimizing the intrinsic properties of electrocatalysts for CO2 RR by the method of tuning the electronic structure.

Genomic potential and physiological characteristics of C1 metabolism in novel acetogenic bacteria

Acetogenic bacteria can utilize C1 compounds, such as carbon monoxide (CO), formate, and methanol, via the Wood-Ljungdahl pathway (WLP) to produce biofuels and biochemicals. Two novel acetogenic bacteria of the family Eubacteriaceae ES2 and ES3 were isolated from Eulsukdo, a delta island in South Korea. We conducted whole genome sequencing of the ES strains and comparative genome analysis on the core clusters of WLP with Acetobacterium woodii DSM1030T and Eubacterium limosum ATCC8486T. The methyl-branch cluster included a formate transporter and duplicates or triplicates copies of the fhs gene, which encodes formyl-tetrahydrofolate synthetase. The formate dehydrogenase cluster did not include the hydrogenase gene, which might be replaced by a functional complex with a separate electron bifurcating hydrogenase (HytABCDE). Additionally, duplicated copies of the acsB gene, encoding acetyl-CoA synthase, are located within or close to the carbonyl-branch cluster. The serum bottle culture showed that ES strains can utilize a diverse range of C1 compounds, including CO, formate, and methanol, as well as CO2. Notably, ES2 exhibited remarkable resistance to high concentrations of C1 substrates, such as 100% CO (200 kPa), 700 mM formate, and 500 mM methanol. Moreover, ES2 demonstrated remarkable growth rates under 50% CO (0.45 h-1) and 200 mM formate (0.34 h-1). These growth rates are comparable to or surpassing those previously reported in other acetogenic bacteria. Our study introduces novel acetogenic ES strains and describes their genetic and physiological characteristics, which can be utilized in C1-based biomanufacturing.

Surfactant-Free Formate/O2 Biofuel Cell with Electropolymerized Phenothiazine Derivative-Modified Enzymatic Bioanode

A formate (HCOO-) bioanode was developed by utilizing a phenothiazine-based electropolymerized layer deposited on sucrose-derived carbon. The electrode modified with NAD-dependent formate dehydrogenase and the electropolymerized layer synergistically catalyzed the oxidation of the coenzyme (NADH) and fuel (HCOO-) to achieve efficient electron transfer. Further, the replacement of carbon nanotubes with water-dispersible sucrose-derived carbon used as the electrode base allowed the fabrication of a surfactant-free bioanode delivering a maximum current density of 1.96 mA cm-2 in the fuel solution. Finally, a separator- and surfactant-free HCOO-/O2 biofuel cell featuring the above bioanode and a gas-diffusion biocathode modified with bilirubin oxidase and 2,2'-azino-bis(3-ethylbenzothiazoline-6-sulfonate) was fabricated, delivering a maximum power density of 70 μW cm-2 (at 0.24 V) and an open-circuit voltage of 0.59 V. Thus, this study demonstrates the potential of formic acid as a fuel and possibilities for the application of carbon materials in bioanodes.

Formate Might Be a Novel Potential Serum Metabolic Biomarker for Type 2 Diabetic Peripheral Neuropathy

Background

As one of the most frequent complications of type 2 diabetes mellitus (T2DM), diabetic peripheral neuropathy (DPN) shows a profound impact on 50% of patients with symptoms of neuropathic pain, numbness and other paresthesia. No valid serum biomarkers for the prediction of DPN have been identified in the clinic so far. This study is to investigate the potential serum biomarkers for DPN firstly based on 1H-Nuclear Magnetic Resonance (1H-NMR)-based metabolomics technique.

Methods

Thirty-six patients enrolled in this study were divided into two groups: 18 T2DM patients without DPN (T2DM group) and 18 T2DM patients with DPN (DPN group). Serum metabolites were measured via 1H-NMR spectroscopy. Bioinformatic approaches including principal component analysis (PCA), orthogonal partial least squares-discriminant analysis (OPLS-DA), independent sample t-test, Fisher's test, Pearson and Spearman correlation analysis, Stepwise multiple linear regression analysis and receiver operating characteristic (ROC) curve analysis were used to identify the potential altered serum biomarkers.

Results

A total of 20 metabolites were obtained and further analyzed. Formate was identified as the only potential biomarker that decreased in the DPN group with statistical significance after multiple comparisons (p<0.05). Formate also displayed a negative relationship with some elevated clinical markers in DPN. ROC curve analysis showed a good discriminative ability for formate in DPN with an area under the curve (AUC) value of 0.981.

Conclusion

Formate could be considered a potential serum metabolic biomarker for DPN. The reduced level of formate in DPN may be associated with mitochondrial dysfunction and gut microbiota alteration. Monitoring the level of serum formate would be an important strategy for the early diagnosis of DPN and a supplement of formate may be a promising treatment for DPN in the future.

Development of Different Kinds of Electrocatalyst for the Electrochemical Reduction of Carbon Dioxide Reactions: An Overview

Significant advancements have been made in the development of CO2 reduction processes for applications such as electrosynthesis, energy storage, and environmental remediation. Several materials have demonstrated great potential in achieving high activity and selectivity for the desired reduction products. Nevertheless, these advancements have primarily been limited to small-scale laboratory settings, and the considerable technical obstacles associated with large-scale CO2 reduction have not received sufficient attention. Many of the researchers have been faced with persistent challenges in the catalytic process, primarily stemming from the low Faraday efficiency, high overpotential, and low limiting current density observed in the production of the desired target product. The highlighted materials possess the capability to transform CO2 into various oxygenates, including ethanol, methanol, and formates, as well as hydrocarbons such as methane and ethane. A comprehensive summary of the recent research progress on these discussed types of electrocatalysts is provided, highlighting the detailed examination of their electrocatalytic activity enhancement strategies. This serves as a valuable reference for the development of highly efficient electrocatalysts with different orientations. This review encompasses the latest developments in catalyst materials and cell designs, presenting the leading materials utilized for the conversion of CO2 into various valuable products. Corresponding designs of cells and reactors are also included to provide a comprehensive overview of the advancements in this field.

Real flue gas CO2 hydrogenation to formate by an enzymatic reactor using O2- and CO-tolerant hydrogenase and formate dehydrogenase

It is challenging to capture carbon dioxide (CO2), a major greenhouse gas in the atmosphere, due to its high chemical stability. One potential practical solution to eliminate CO2 is to convert CO2 into formate using hydrogen (H2) (CO2 hydrogenation), which can be accomplished with inexpensive hydrogen from sustainable sources. While industrial flue gas could provide an adequate source of hydrogen, a suitable catalyst is needed that can tolerate other gas components, such as carbon monoxide (CO) and oxygen (O2), potential inhibitors. Our proposed CO2 hydrogenation system uses the hydrogenase derived from Ralstonia eutropha H16 (ReSH) and formate dehydrogenase derived from Methylobacterium extorquens AM1 (MeFDH1). Both enzymes are tolerant to CO and O2, which are typical inhibitors of metalloenzymes found in flue gas. We have successfully demonstrated that combining ReSH- and MeFDH1-immobilized resins can convert H2 and CO2 in real flue gas to formate via a nicotinamide adenine dinucleotide-dependent cascade reaction. We anticipated that this enzyme system would enable the utilization of diverse H2 and CO2 sources, including waste gases, biomass, and gasified plastics.

Enhancing the Photocatalytic Activity of Zirconium-Based Metal-Organic Frameworks Through the Formation of Mixed-Valence Centers

Despite the desirability of metal-organic frameworks (MOFs) as heterogeneous photocatalysts, current strategies available to enhance the performance of MOF photocatalysts are complicated and expensive. Herein, a simple strategy is presented for improving the activity of MOF photocatalysts by regulating the atomic interface structure of the metal active sites on the MOF. In this study, MOF (PCN-222) is hybridized with cellulose acetate (CA@PCN-222) through an optimized atomic interface strategy, which lowers the average valence state of Zr ions. The electronic metal-support interaction mechanism of CA@PCN-222 is revealed by evaluating the photocatalytic CO2 reduction reaction (CO2 RR). The experimental results suggested that the electron migration efficiency at the atomic interface of the MOFs strongly coupled with cellulose is significantly improved. In particular, the CO2 RR to formate activity of CA@PCN-222 photocatalyst greatly increased from 778.2 to 2816.0 µmol g-1 compared with pristine PCN-222 without cellulose acetate. The findings suggest that the strongly coupled metal-ligand moiety at the atomic interface of MOFs may play a synergistic role in heterogeneous catalysts.

Formate-producing capacity provided by reducing ability of Streptococcus thermophilus nicotinamide adenine dinucleotide oxidase determines yogurt acidification rate

Yogurt is made by fermenting milk with 2 lactic acid bacteria, Lactobacillus delbrueckii ssp. bulgaricus and Streptococcus thermophilus. To comprehensively understand the protocooperation mechanism between S. thermophilus and L. bulgaricus in yogurt fermentation, we examined 24 combinations of cocultures comprising 7 fast- or slow-acidifying S. thermophilus strains with 6 fast- or slow-acidifying L. bulgaricus strains. Furthermore, 3 NADH oxidase (Nox)-deficient mutants (Δnox) and one pyruvate formate-lyase deficient mutant (ΔpflB) of S. thermophilus were used to evaluate the factor that determines the acidification rate of S. thermophilus. The results revealed that the acidification rate of S. thermophilus monoculture determined the yogurt fermentation rates, despite the coexistence of L. bulgaricus, whose acidification rate was either fast or slow. Significant correlation was found between the acidification rate of S. thermophilus monoculture and the amount of formate production. Result using ΔpflB showed that the formate was indispensable for the acidification of S. thermophilus. Moreover, results of the Δnox experiments revealed that formate production required Nox activity, which not only regulated dissolved oxygen, but also the redox potential. The Nox provided the large decrease in redox potential required by pyruvate formate-lyase to produce formate. A highly significant correlation was found between formate accumulation and Nox activity in S. thermophilus. In conclusion, the formate production ability provided by the action of Nox activity determines the acidification rate of S. thermophilus, and consequently, regulates yogurt coculture fermentation.

InBi Bimetallic Sites for Efficient Electrochemical Reduction of CO2 to HCOOH

Formic acid is receiving intensive attention as being one of the most progressive chemical fuels for the electrochemical reduction of carbon dioxide. However, the majority of catalysts suffer from low current density and Faraday efficiency. To this end, an efficient catalyst of In/Bi-750 with InOx nanodots load is prepared on a two-dimensional nanoflake Bi2 O2 CO3 substrate, which increases the adsorption of * CO2 due to the synergistic interaction between the bimetals and the exposure of sufficient active sites. In the H-type electrolytic cell, the formate Faraday efficiency (FE) reaches 97.17% at -1.0 V (vs reversible hydrogen electrode (RHE)) with no significant decay over 48 h. A formate Faraday efficiency of 90.83% is also obtained in the flow cell at a higher current density of 200 mA cm-2 . Both in-situ Fourier transform infrared spectroscopy (FT-IR) and theoretical calculations show that the BiIn bimetallic site can deliver superior binding energy to the * OCHO intermediate, thereby fundamentally accelerating the conversion of CO2 to HCOOH. Furthermore, assembled Zn-CO2 cell exhibits a maximum power of 6.97 mW cm-1 and a stability of 60 h.

Anion Exchange Facilitates the In Situ Construction of Bi/BiO Interfaces for Enhanced Electrochemical CO2 -to-Formate Conversion Over a Wide Potential Window

Electrochemical reduction of CO2 (CO2 RR) into value-added products is a promising strategy to reduce energy consumption and solve environmental issues. Formic acid/formate is one of the high-value, easy-to-collect, and economically viable products. Herein, the reconstructed Bi2 O2 CO3 nanosheets (BOCR NSs) are synthesized by an in situ electrochemical anion exchange strategy from Bi2 O2 SO4 as a pre-catalyst. The BOCR NSs achieve a high formate Faradaic efficiency (FEformate ) of 95.7% at -1.1 V versus reversible hydrogen electrode (vs. RHE), and maintain FEformate above 90% in a wide potential range from -0.8 to -1.5 V in H-cell. The in situ spectroscopic studies reveal that the obtained BOCR NSs undergo the anion exchange from Bi2 O2 SO4 to Bi2 O2 CO3 and further promote the self-reduction to metallic Bi to construct Bi/BiO active site to facilitate the formation of OCHO* intermediate. This result demonstrates anion exchange strategy can be used to rational design high performance of the catalysts toward CO2 RR.

Formate production is dispensable for Haemophilus ducreyi virulence in human volunteers

Haemophilus ducreyi is a causative agent of cutaneous ulcers in children who live in the tropics and of the genital ulcer disease chancroid in sexually active persons. In the anaerobic environment of abscesses and ulcers, anaerobic respiration and mixed acid fermentation (MAF) can be used to provide cellular energy. In Escherichia coli, MAF produces formate, acetate, lactate, succinate, and ethanol; however, MAF has not been studied in H. ducreyi. In human challenge experiments with H. ducreyi 35000HP, transcripts of the formate transporter FocA and pyruvate formate lyase (PflB) were upregulated in pustules compared to the inocula. We made single and double mutants of focA and pflB in 35000HP. Growth of 35000HPΔfocA was similar to 35000HP, but 35000HPΔpflB and 35000HPΔfocA-pflB had growth defects during both aerobic and anaerobic growth. Mutants lacking pflB did not secrete formate into the media. However, formate was secreted into the media by 35000HPΔfocA, indicating that H. ducreyi has alternative formate transporters. The pH of the media during anaerobic growth decreased for 35000HP and 35000HPΔfocA, but not for 35000HPΔpflB or 35000HPΔfocA-pflB, indicating that pflB is the main contributor to media acidification during anaerobic growth. We tested whether formate production and transport were required for virulence in seven human volunteers in a mutant versus parent trial between 35000HPΔfocA-pflB and 35000HP. The pustule formation rate was similar for 35000HP (42.9%)- and 35000HPΔfocA-pflB (62%)-inoculated sites. Although formate production occurs during in vitro growth and focA-pflB transcripts are upregulated during human infection, focA and pflB are not required for virulence in humans.

Regulation of Bimetallic Coordination Centers in MOF Catalyst for Electrochemical CO2 Reduction to Formate

Electrocatalytic reduction of CO2 to valuable chemicals can alleviate the energy crisis, and solve the greenhouse effect. The key is to develop non-noble metal electrocatalysts with high activity, selectivity, and stability. Herein, bimetallic metal organic frameworks (MOFs) materials (BiZn-MOF, BiSn-MOF, and BiIn-MOF) were constructed by coordinating the metals Zn, In, Sn, and Bi with the organic ligand 3-amino-1H-1,2,4-triazole-5-carboxylic acid (H2atzc) through a rapid microwave synthesis approach. The coordination centers in bimetallic MOF catalyst were regulated to optimize the catalytic performance for electrochemical CO2 reduction reaction (CO2RR). The optimized catalyst BiZn-MOF exhibited higher catalytic activity than those of Bi-MOF, BiSn-MOF, and BiIn-MOF. BiZn-MOF exhibited a higher selectivity for formate production with a Faradic efficiency (FE = 92%) at a potential of -0.9 V (vs. RHE, reversible hydrogen electrode) with a current density of 13 mA cm-2. The current density maintained continuous electrolysis for 13 h. The electrochemical conversion of CO2 to formate mainly follows the *OCHO pathway. The good catalytic performance of BiZn-MOF may be attributed to the Bi-Zn bimetallic coordination centers in the MOF, which can reduce the binding energies of the reaction intermediates by tuning the electronic structure and atomic arrangement. This study provides a feasible strategy for performance optimization of bismuth-based catalysts.

Whole-body modelling reveals microbiome and genomic interactions on reduced urine formate levels in Alzheimer's disease

In this study, we aimed to understand the potential role of the gut microbiome in the development of Alzheimer's disease (AD). We took a multi-faceted approach to investigate this relationship. Urine metabolomics were examined in individuals with AD and controls, revealing decreased formate and fumarate concentrations in AD. Additionally, we utilized whole-genome sequencing (WGS) data obtained from a separate group of individuals with AD and controls. This information allowed us to create and investigate host-microbiome personalized models. Notably, AD individuals displayed diminished formate microbial secretion in these models. Additionally, we identified specific reactions responsible for the production of formate in the host, and interestingly, these reactions were linked to genes that have correlations with AD. This study suggests formate as a possible early AD marker and highlights genetic and microbiome contributions to its production. The reduced formate secretion and its genetic associations point to a complex connection between gut microbiota and AD. This holistic understanding might pave the way for novel diagnostic and therapeutic avenues in AD management.

Perovskite-Derived Bismuth with I- and Cs+ Dual Modification for High-Efficiency CO2 -to-Formate Electrosynthesis and Al-CO2 Batteries

Bi-based materials are one of the most promising candidates for electrochemical CO2 reduction reaction (CO2 RR) to formate; however, the majority of them still suffer from low current density and stability that essentially constrain their potential applications at the industrial scale. Surface modification represents an effective approach to modulate the electrode microenvironment and the relative binding strength of key intermediates. Herein, it is demonstrated that the surface comodification with halides and alkali metal ions from the conversion of Bi-based halide perovskite nanocrystals is a viable strategy to boost the CO2 RR performance of Bi for formate electrosynthesis. Cs3 Bi2 I9 nanocrystals are prepared by a hot-injection method. The as-prepared products feature well-defined hexagonal shape and uniform size distribution. When used as the precatalyst, Cs3 Bi2 I9 nanocrystals are converted to Cs+ and I- comodified Bi. The resultant catalyst exhibits high formate Faradaic efficiency close to 100%, and remarkable partial current density up to 44 mA cm-2 in an H-cell and up to 276 mA cm-2 in a flow cell. Moreover, Cs3 Bi2 I9 is used as the cathode catalyst and paired with an Al anode in an Al-CO2 battery for simultaneous CO2 valorization and power generation.

High-Dispersive Pd Nanoparticles on Hierarchical N-Doped Carbon Nanocages to Boost Electrochemical CO2 Reduction to Formate at Low Potential

Electrochemical CO2 reduction reaction (CO2 RR) to value-added chemicals/fuels is an effective strategy to achieve the carbon neutral. Palladium is the only metal to selectively produce formate via CO2 RR at near-zero potentials. To reduce cost and improve activity, the high-dispersive Pd nanoparticles on hierarchical N-doped carbon nanocages (Pd/hNCNCs) are constructed by regulating pH in microwave-assisted ethylene glycol reduction. The optimal catalyst exhibits high formate Faradaic efficiency of >95% within -0.05-0.30 V and delivers an ultrahigh formate partial current density of 10.3 mA cm-2 at the low potential of -0.25 V. The high performance of Pd/hNCNCs is attributed to the small size of uniform Pd nanoparticles, the optimized intermediates adsorption/desorption on modified Pd by N-doped support, and the promoted mass/charge transfer kinetics arising from the hierarchical structure of hNCNCs. This study sheds light on the rational design of high-efficient electrocatalysts for advanced energy conversion.

Heterologous expression of formate dehydrogenase enables photoformatotrophy in the emerging model microalga, Picochlorum renovo

Rising global greenhouse gas emissions and the impacts of resultant climate change necessitate development and deployment of carbon capture and conversion technologies. Amongst the myriad of bio-based conversion approaches under evaluation, a formate bio-economy has recently been proposed, wherein CO2-derived formate serves as a substrate for concurrent carbon and energy delivery to microbial systems. To date, this approach has been explored in chemolithotrophic and heterotrophic organisms via native or engineered formatotrophy. However, utilization of this concept in phototrophic organisms has yet to be reported. Herein, we have taken the first steps to establish formate utilization in Picochlorum renovo, a recently characterized eukaryotic microalga with facile genetic tools and promising applied biotechnology traits. Plastidial heterologous expression of a formate dehydrogenase (FDH) enabled P. renovo growth on formate as a carbon and energy source. Further, FDH expression enhanced cultivation capacity on ambient CO2, underscoring the potential for bypass of conventional CO2 capture and concentration limitations. This work establishes a photoformatotrophic cultivation regime that leverages light energy-driven formate utilization. The resultant photosynthetic formate platform has widespread implications for applied phototrophic cultivation systems and the bio-economy at large.

Interfacial Electronic Interaction in In2O3/Poly(3,4-ethylenedioxythiophene)-Modified Carbon Heterostructures for Enhanced Electroreduction of CO2 to Formate

Formate, as an important chemical raw material, is considered to be one of the most promising products for industrialization among CO₂ electroreduction reaction (CO₂RR) products, but it still suffers from poor selectivity and a low formation rate at a high current density on account of the competitory hydrogen evolution reaction. Herein, the heterogeneous nanostructure was constructed by anchoring In₂O₃ nanoparticles on poly(3,4-ethylenedioxythiophene) (PEDOT)-modified carbon black (In₂O₃/PC), in which the PEDOT polymer interface layer could immobilize In₂O₃ nanoparticles and obtain a notable reduction in electron transfer resistance among the In₂O₃ particles, showing a 27% increase in the total electron transfer rate. The optimized In₂O₃/PC with rich heterogeneous interfaces selectively reduced CO₂ to formate with a high FE of 95.4% and a current density of 251.4 mA cm^-2 under -1.18 V vs RHE. Also, the formate production rate for In₂O₃/PC was up to 7025.1 μmol h^-1 cm^-2, surpassing most previously reported CO₂RR catalysts. The in situ XRD results revealed that In₂O₃ particles were reduced to metallic indium (In) as catalytic active sites during CO₂RR. DFT calculations verified that a strong interface interaction between In sites and PC induced electron transfer from In sites to PC, which could optimize the charge distribution of active sites, accelerate electron transfer, and elevate the p-band center of In sites toward the Fermi level, thereby lowering the adsorption energy of *OCHO intermediates for CO₂ conversion to formate.

ALDH1L2 regulation of formate, formyl-methionine, and ROS controls cancer cell migration and metastasis

Mitochondrial 10-formyltetrahydrofolate (10-formyl-THF) is utilized by three mitochondrial enzymes to produce formate for nucleotide synthesis, NADPH for antioxidant defense, and formyl-methionine (fMet) to initiate mitochondrial mRNA translation. One of these enzymes-aldehyde dehydrogenase 1 family member 2 (ALDH1L2)-produces NADPH by catabolizing 10-formyl-THF into CO2 and THF. Using breast cancer cell lines, we show that reduction of ALDH1L2 expression increases ROS levels and the production of both formate and fMet. Both depletion of ALDH1L2 and direct exposure to formate result in enhanced cancer cell migration that is dependent on the expression of the formyl-peptide receptor (FPR). In various tumor models, increased ALDH1L2 expression lowers formate and fMet accumulation and limits metastatic capacity, while human breast cancer samples show a consistent reduction of ALDH1L2 expression in metastases. Together, our data suggest that loss of ALDH1L2 can support metastatic progression by promoting formate and fMet production, resulting in enhanced FPR-dependent signaling.

Formate Metabolism in Shigella flexneri and Its Effect on HeLa Cells at Different Stages during the Infectious Process

Shigellosis caused by Shigella is one of the most important foodborne illnesses in global health, but little is known about the metabolic cross talk between this bacterial pathogen and its host cells during the different stages of the infection process. A detailed understanding of the metabolism can potentially lead to new drug targets remedying the pressing problem of antibiotic resistance. Here, we use stable isotope-resolved metabolomics as an unbiased and fast method to investigate how Shigella metabolizes 13C-glucose in three different environments: inside the host cells, adhering to the host cells, and alone in suspension. We find that especially formate metabolism by bacteria is sensitive to these different environments. The role of formate in pathogen metabolism is sparsely described in the literature compared to the roles of acetate and butyrate. However, its metabolic pathway is regarded as a potential drug target due to its production in microorganisms and its absence in humans. Our study provides new knowledge about the regulatory effect of formate. Bacterial metabolism of formate is pH dependent when studied alone in culture medium, whereas this effect is less pronounced when the bacteria adhere to the host cells. Once the bacteria are inside the host cells, we find that formate accumulation is reduced. Formate also affects the host cells resulting in a reduced infection rate. This was correlated to an increased immune response. Thus, intriguingly formate plays a double role in pathogenesis by increasing the virulence of Shigella and at the same time stimulating the immune response of the host. IMPORTANCE Bacterial infection is a pressing societal concern due to development of resistance toward known antibiotics. Central carbon metabolism has been suggested as a potential new target for drug development, but metabolic changes upon infection remain incompletely understood. Here, we used a cellular infection model to study how the bacterial pathogen Shigella adapts its metabolism depending on the environment starting from the extracellular medium until Shigella successfully invaded and proliferated inside host cells. The mixed-acid fermentation of Shigella was the major metabolic pathway during the infectious process, and the glucose-derived metabolite formate surprisingly played a divergent role in the pathogen and in the host cell. Our data show reduced infection rate when both host cells and bacteria were treated with formate, which correlated with an upregulated immune response in the host cells. The formate metabolism in Shigella thus potentially provides a route toward alternative treatment strategies for Shigella prevention.

1T/1H-SnS2 Sheets for Electrochemical CO2 Reduction to Formate

Understanding the catalytic mechanism of highly active two-dimensional electrocatalysts is crucial to their rational design. Herein, we reveal the element dependence of the reactivity of two-dimensional metal dichalcogenide sheets for electrocatalytic CO₂ reduction. We found that tin(IV) disulfide (SnS₂) and molybdenum(IV) disulfide (MoS₂) sheets exhibited Faradaic efficiencies of 63.3% and ∼0%, respectively, for formic acid. Scanning electrochemical cell microscopy and theoretical calculations were used to identify the catalytically active sites of SnS₂ as terraces and edges. Owing to the effective utilization of the entire surface area, SnS₂ can effectively accelerate catalytic reactions. This finding provides a direction for material research in two-dimensional electrocatalysts for energy-efficient chemical production from electrochemical CO₂ reduction, as well as for other energy devices.

Core and auxiliary functions of one-carbon metabolism in Pseudomonas putida exposed by a systems-level analysis of transcriptional and physiological responses

The soil bacterium Pseudomonas putida is a robust biomanufacturing host that assimilates a broad range of substrates while efficiently coping with adverse environmental conditions. P. putida is equipped with functions related to one-carbon (C1) compounds (e.g. methanol, formaldehyde, and formate) oxidation-yet pathways to assimilate these carbon sources are largely absent. In this work, we adopted a systems-level approach to study the genetic and molecular basis of C1 metabolism in P. putida. RNA sequencing identified two oxidoreductases, encoded by PP_0256 and PP_4596, transcriptionally active in the presence of formate. Quantitative physiology of deletion mutants revealed growth defects at high formate concentrations, pointing to an important role of these oxidoreductases in C1 tolerance. Moreover, we describe a concerted detoxification process for methanol and formaldehyde, the C1 intermediates upstream formate. Alcohol oxidation to highly-reactive formaldehyde by PedEH and other broad-substrate-range dehydrogenases underpinned the (apparent) suboptimal methanol tolerance of P. putida. Formaldehyde was mostly processed by a glutathione-dependent mechanism encoded in the frmAC operon, and thiol-independent FdhAB and AldB-II overtook detoxification at high aldehyde concentrations. Deletion strains were constructed and characterized towards unveiling these biochemical mechanisms, underscoring the worth of P. putida for emergent biotechnological applications-e.g. engineering synthetic formatotrophy and methylotrophy.IMPORTANCEC1 substrates continue to attract interest in biotechnology, as their use is both cost-effective and ultimately expected to mitigate the impact of greenhouse gas emissions. However, our current understanding of bacterial C1 metabolism remains relatively limited in species that cannot grow on (i.e., assimilate) these substrates. Pseudomonas putida, a model Gram-negative environmental bacterium, constitutes a prime example of this sort. The biochemical pathways active in response to methanol, formaldehyde, and formate have been largely overlooked-although the ability of P. putida to process C1 molecules has been previously alluded to in the literature. By using a systems-level strategy, this study bridges such knowledge gap through the identification and characterization of mechanisms underlying methanol, formaldehyde, and formate detoxification-including hitherto unknown enzymes that act on these substrates. The results reported herein both expand our understanding of microbial metabolism and lay a solid foundation for engineering efforts toward valorizing C1 feedstocks.

Heterogeneous Catalytic Systems for Carbon Dioxide Hydrogenation to Value-Added Chemicals

Utilizing renewable energy to hydrogenate carbon dioxide into fuels eliminates massive CO2 emissions from the atmosphere and diminishes our need for using fossil fuels. This review presents the most recent developments for designing heterogeneous catalysts for the hydrogenation of CO2 to formate, methanol, and C2+ hydrocarbons. Thermodynamic challenges and mechanistic insights are discussed, providing a strong foundation to propose a suitable catalyst. The main body of this review focuses on nanostructured catalysts for constructing efficient heterogeneous systems. The most important factors affecting catalytic performance are highlighted, including active metals, supports and promoters that can potentially be used. The summary of the results and the outlook are presented in the final section.

One-Step Electrochemical Dealloying of 3D Bi-Continuous Micro-Nanoporous Bismuth Electrodes and CO2RR Performance

The rapid development of electrochemical CO₂ reduction offers a promising route to convert intermittent renewable energy into products of high value-added fuels or chemical feedstocks. However, low faradaic efficiency, low current density, and a narrow potential range still limit the large-scale application of CO₂RR electrocatalysts. Herein, monolith 3D bi-continuous nanoporous bismuth (np-Bi) electrodes are fabricated via a simple one-step electrochemical dealloying strategy from Pb-Bi binary alloy. The unique bi-continuous porous structure ensures highly effective charge transfer; meanwhile, the controllable millimeter-sized geometric porous structure enables easy catalyst adjustment to expose highly suitable surface curvatures with abundant reactive sites. This results in a high selectivity of 92.6% and superior potential window (400 mV, selectivity > 88%) for the electrochemical reduction of carbon dioxide to formate. Our scalable strategy provides a feasible pathway for mass-producing high-performance and versatile CO₂ electrocatalysts.

Promote electroreduction of CO2 via catalyst valence state manipulation by surface-capping ligand

Electrochemical CO2 reduction provides a potential means for synthesizing value-added chemicals over the near equilibrium potential regime, i.e., formate production on Pd-based catalysts. However, the activity of Pd catalysts has been largely plagued by the potential-depended deactivation pathways (e.g., [Formula: see text]-PdH to [Formula: see text]-PdH phase transition, CO poisoning), limiting the formate production to a narrow potential window of 0 V to -0.25 V vs. reversible hydrogen electrode (RHE). Herein, we discovered that the Pd surface capped with polyvinylpyrrolidone (PVP) ligand exhibits effective resistance to the potential-depended deactivations and can catalyze formate production at a much extended potential window (beyond -0.7 V vs. RHE) with significantly improved activity (~14-times enhancement at -0.4 V vs. RHE) compared to that of the pristine Pd surface. Combined results from physical and electrochemical characterizations, kinetic analysis, and first-principle simulations suggest that the PVP capping ligand can effectively stabilize the high-valence-state Pd species (Pdδ+) resulted from the catalyst synthesis and pretreatments, and these Pdδ+ species are responsible for the inhibited phase transition from [Formula: see text]-PdH to [Formula: see text]-PdH, and the suppression of CO and H2 formation. The present study confers a desired catalyst design principle, introducing positive charges into Pd-based electrocatalyst to enable efficient and stable CO2 to formate conversion.

CoP2O6-Assisted Copper/Carbon Catalyst for Electrocatalytic Reduction of CO2 to Formate

Reducing CO₂ into value-added chemicals and fuels by electrochemical reduction of CO₂ (CO₂ER) in an aqueous medium is considered a potential way to store intermittent renewable energy and alleviate the energy crisis. Cu-based catalysts are a common electrocatalyst used in CO₂ER. However, selectivity has always been a difficult problem to solve, especially in terms of the production of C₁ products. Based on the characteristics of the carbon framework and the CoP₂O₆ species, herein, Cu and CoP₂O₆ co-anchored N-doped hollow carbon spheres (CoP₂O₆/HCS-Cu) with a precisely controllable copper content were prepared, in order to produce formate with a high current density and Faraday efficiency from CO₂ER. The ratio of copper to cobalt has a strong influence on the catalytic performance of the catalyst. In addition, the experimental results and density functional theory calculations show that CoP₂O₆ is an important factor in promoting the formation of formate.

Two-Dimensional Metal Coordination Polymer Derived Indium Nanosheet for Efficient Carbon Dioxide Reduction to Formate

Main group indium materials have been known as promising electrocatalysts for two-electron-involved carbon dioxide reduction to produce formate, which is a key energy vector in many industrial reactions. However, the synthesis of two-dimensional (2D) monometallic nonlayered indium remains a great challenge. Here, we present a facile electrochemical reduction strategy to transform 2D indium coordination polymer into elemental indium nanosheets. In a customized flow cell, the reconstructed metallic indium exhibits a high Faradaic efficiency (FE) of 96.3% for formate with a maximum partial current density exceeding 360 mA cm^-2 and negligible degradation after 140 h operation in 1 M KOH solution, outperforming the state-of-the-art indium-based electrocatalysts. Moreover, in and ex situ electrochemical analysis and characterizations demonstrate that the enhanced exposure of active sites and mass/charge transport at the CO₂ gas-catalyst-electrolyte triple-phase interface and the restrained electrolyte flooding are contributing to producing and stabilizing carbon dioxide radical anion intermediates, thus leading to superior catalytic performance.

Selective Ethylene Glycol Oxidation to Formate on Nickel Selenide with Simultaneous Evolution of Hydrogen

There is an urgent need for cost-effective strategies to produce hydrogen from renewable net-zero carbon sources using renewable energies. In this context, the electrochemical hydrogen evolution reaction can be boosted by replacing the oxygen evolution reaction with the oxidation of small organic molecules, such as ethylene glycol (EG). EG is a particularly interesting organic liquid with two hydroxyl groups that can be transformed into a variety of C1 and C2 chemicals, depending on the catalyst and reaction conditions. Here, a catalyst is demonstrated for the selective EG oxidation reaction (EGOR) to formate on nickel selenide. The catalyst nanoparticle (NP) morphology and crystallographic phase are tuned to maximize its performance. The optimized NiS electrocatalyst requires just 1.395 V to drive a current density of 50 mA cm^-2 in 1 m potassium hydroxide (KOH) and 1 m EG. A combination of in situ electrochemical infrared absorption spectroscopy (IRAS) to monitor the electrocatalytic process and ex situ analysis of the electrolyte composition shows the main EGOR product is formate, with a Faradaic efficiency above 80%. Additionally, C2 chemicals such as glycolate and oxalate are detected and quantified as minor products. Density functional theory (DFT) calculations of the reaction process show the glycol-to-oxalate pathway to be favored via the glycolate formation, where the CC bond is broken and further electro-oxidized to formate.

The dCache Domain of the Chemoreceptor Tlp1 in Campylobacter jejuni Binds and Triggers Chemotaxis toward Formate

Chemotaxis is an important virulence factor in some enteric pathogens, and it is involved in the pathogenesis and colonization of the host. However, there is limited knowledge regarding the environmental signals that promote chemotactic behavior and the sensing of these signals by chemoreceptors. To date, there is no information on the ligand molecule that directly binds to and is sensed by Campylobacter jejuni Tlp1, which is a chemoreceptor with a dCache-type ligand-binding domain (LBD). dCache (double Calcium channels and chemotaxis receptor) is the largest group of sensory domains in bacteria, but the dCache-type chemoreceptor that directly binds to formate has not yet been discovered. In this study, formate was identified as a direct-binding ligand of C. jejuni Tlp1 with high sensing specificity. We used the strategy of constructing a functional hybrid receptor of C. jejuni Tlp1 and the Escherichia coli chemoreceptor Tar to screen for the potential ligand of Tlp1, with the binding of formate to Tlp1-LBD being verified using isothermal titration calorimetry. Molecular docking and experimental analyses indicated that formate binds to the membrane-proximal pocket of the dCache subdomain. Chemotaxis assays demonstrated that formate elicits robust attractant responses of the C. jejuni strain NCTC 11168, specifically via Tlp1. The chemoattraction effect of formate via Tlp1 promoted the growth of C. jejuni, especially when competing with Tlp1- or CheY-knockout strains. Our study reveals the molecular mechanisms by which C. jejuni mediates chemotaxis toward formate, and, to our knowledge, is the first report on the high-specificity binding of the dCache-type chemoreceptor to formate as well as the physiological role of chemotaxis toward formate. IMPORTANCE Chemotaxis is important for Campylobacter jejuni to colonize favorable niches in the gastrointestinal tract of its host. However, there is still a lack of knowledge about the ligand molecules for C. jejuni chemoreceptors. The dCache-type chemoreceptor, namely, Tlp1, is the most conserved chemoreceptor in C. jejuni strains; however, the direct-binding ligand(s) triggering chemotaxis has not yet been discovered. In the present study, we found that the ligand that binds directly to Tlp1-LBD with high specificity is formate. C. jejuni exhibits robust chemoattraction toward formate, primarily via Tlp1. Tlp1 is the first reported dCache-type chemoreceptor that specifically binds formate and triggers strong chemotaxis. We further demonstrated that the formate-mediated promotion of C. jejuni growth is correlated with Tlp1-mediated chemotaxis toward formate. Our work provides important insights into the mechanism and physiological function of chemotaxis toward formate and will facilitate further investigations into the involvement of microbial chemotaxis in pathogen-host interactions.

Formate Over-Oxidation Limits Industrialization of Glycerol Oxidation Paired with Carbon Dioxide Reduction to Formate

Electrocatalytic CO₂ reduction processes are generally coupled with the oxidation of water. Process economics can greatly improve by replacing the water oxidation with a more valuable oxidation reaction, a process called paired electrolysis. Here we report the feasibility of pairing CO₂ reduction with the oxidation of glycerol on Ni₃ S₂ /NF anodes to produce formate at both anode and cathode. Initially we optimized the oxidation of glycerol to maximize the Faraday efficiency to formate by using design of experiments. In flow cell electrolysis, excellent selectivity (up to 90 % Faraday efficiency) was achieved at high current density (150 mA/cm² of geometric surface area). Then we successfully paired the reduction of CO₂ with the oxidation of glycerol. A prerequisite for industrial application is to obtain reaction mixtures with a high concentration of formate to enable efficient downstream separation. We show that the anodic process is limited in formate concentration, as Faraday efficiency to formate greatly decreases when operating at 2.5 M formate (∼10 w%) in the reaction mixture due to over-oxidation of formate. We identify this as a major bottleneck for the industrial feasibility of this paired electrolysis process.

Photoinduced Catalytic Organic-Hydride Transfer to CO2 Mediated with Ruthenium Complexes as NAD+ /NADH Redox Couple Models

The catalytic organic-hydride transfer to CO₂ was first achieved through the photoinduced two-electron reduction of the [Ru(bpy)₂ (pbn)]²⁺ /[Ru(bpy)₂ (pbnHH)]²⁺ (bpy=2,2'-bipyridine, pbn=2-(pyridin-2-yl)benzo[b]-1,5-naphthyridine, and pbnHH=2-(pyridin-2-yl)-5,10-dihydrobenzo[b]-1,5-naphthyridine) redox couple in the presence of 1,3-dimethyl-2-phenyl-2,3-dihydro-1H-benzo[d]imidazole (BIH). The active species for the catalytic hydride transfer to carbon dioxide giving formate is [Ru(bpy)(bpy⋅^- )(pbnHH)]⁺ formed by one-electron reduction of [Ru(bpy)₂ (pbnHH)]²⁺ with BI⋅.

One-Step Phase Separation for Core-Shell Carbon@Indium Oxide@Bismuth Microspheres with Enhanced Activity for CO2 Electroreduction to Formate

It is a substantial challenge to construct electrocatalysts with high activity, good selectivity, and long-term stability for electrocatalytic reduction of carbon dioxide to formic acid. Herein, bismuth and indium species are innovatively integrated into a uniform heterogeneous spherical structure by a neoteric quasi-microemulsion method, and a novel C@In₂ O₃ @Bi₅₀ core-shell structure is constructed through a subsequent one-step phase separation strategy due to melting point difference and Kirkendall effect with the nano-limiting effect of the carbon structure. This core-shell C@In₂ O₃ @Bi₅₀ catalyst can selectively reduce CO₂ to formate with high selectivity (≈90% faradaic efficiency), large partial current density (24.53 mA cm^-2 at -1.36 V), and long-term stability (up to 14.5 h), superior to most of the Bi-based catalysts. The hybrid Bi/In₂ O₃ interfaces of core-shell C@In₂ O₃ @Bi will stabilize the key intermediate HCOO* and suppress CO poisoning, benefiting the CO₂ RR selectivity and stability, while the internal cavity of core-shell structure will improve the reaction kinetics because of the large specific surface area and the enhancement of ion shuttle and electron transfer. Furthermore, the nano-limited domain effect of outmost carbon prevent active components from oxidation and agglomeration, helpful for stabilizing the catalyst. This work offers valuable insights into core-shell structure engineering to promote practical CO₂ conversion technology.

An Interesting Conversion Route of Mononuclear Zinc Complex to Zinc Mixed Carboxylate Coordination Polymer

A complex [Zn(bpy)(acr)₂]·H₂O (1) was converted in a DMF medium (DMF = N,N'-dimethylformamide) into a coordination polymer [Zn(bpy)(acr)(HCOO)]_n (1a) (bpy = 2,2'-bipyridine, and Hacr = acrylic acid), and the species was fully characterized through a single crystal X-ray diffraction. Additional data were obtained by IR and thermogravimetric analysis. Complex (1a) crystalized the coordination polymer in the space group Pca2₁ of an orthorhombic system. Structural characterization revealed that Zn(II) adopted a square pyramidal stereochemistry generated by bpy molecules, coordinated by chelate, acrylate, and formate ions as unidentate and bridged, respectively. The presence of both the formate and the acrylate with different coordination modes generated two bands in ranges that were characteristic for the carboxylate vibration modes. Thermal decomposition occurs in two complex steps: it first happens via a bpy release, which is followed by an overlapped process that is associated with acrylate and formate decomposition. The obtained complex is of present interest due to the presence of two different carboxylates in its composition and situation, which is rarely reported in the literature.

Self-Supporting Bi-Sb Bimetallic Nanoleaf for Electrochemical Synthesis of Formate by Highly Selective CO2 Reduction

Electrocatalytic reduction of CO₂ into valuable fuels and chemical feedstocks in a sustainable and environmentally friendly manner is an ideal way to mitigate climate change and environmental problems. Here, we fabricated a series of self-supporting Bi-Sb bimetallic nanoleaves on carbon paper (CP) by a facile electrodeposition method. The synergistic effect of Bi and Sb components and the change of the electronic structure lead to high formate selectivity and excellent stability in the electrochemical CO₂ reduction reaction (CO₂RR). Specifically, the Bi-Sb/CP bimetallic electrode achieved a high Faradic efficiency (FE_formate, 88.30%) at -0.9 V (vs RHE). The FE of formate remained above 80% in a broad potential range of -0.9 to -1.3 V (vs RHE), while FE_CO was suppressed below 6%. Density functional theory calculations showed that Bi(012)-Sb reduced the adsorption energy of the *OCHO intermediate and promoted the mass transfer of charges. The optimally adsorbed *OCHO intermediate promoted formate production while inhibiting the CO product pathway, thereby enhancing the selectivity to formate synthesis. Moreover, the CO₂RR performance was also investigated in a flow-cell system to evaluate its potential for industrial applications. The bimetallic Bi-Sb catalyst can maintain a steady current density of 160 mA/cm² at -1.2 V (vs RHE) for 25 h continuous electrolysis. Such excellent stability for formate generation in flow cells has rarely been reported in previous studies. This work offers new insights into the development of bimetallic self-supporting electrodes for CO₂ reduction.

Heterogeneous Structure of Sn/SnO2 Constructed via Phase Engineering for Efficient and Stable CO2 Reduction

The electrochemical carbon dioxide reduction reaction (CO₂RR) catalyzed by Sn-based materials shows great potential for CO₂-to-formate conversion. The presence of tin species with different oxidation states can promote the catalytic performance, most likely due to the interfaces of metallic and oxide phases that induce a synergistic effect. Therefore, it is desirable yet challenging to synthesize a hybrid catalyst with abundant active heterogeneous interfaces. Herein, we synthesize a hybrid catalyst constructed by decorating nanosized SnS₂ in the SnO₂ matrix. The uniformly distributed SnS₂ nanoparticles are first reduced to metallic tin, which assists in the generation of abundant Sn/SnO₂ heterogeneous interfaces under the in situ reduction process. Because of the electronic modulation at the heterogeneous interfaces, the resulting catalyst delivers a high current density of 200 mA·cm^-2 at -0.86 V vs RHE, and the performance is stable for over 20 h. This work suggests a potentially powerful interface engineering strategy for the development of high-performance electrocatalysts for the CO₂RR.

Ag-induced Phase Transition of Bi2 O3 Nanofibers for Enhanced Energy Conversion Efficiency towards Formate in CO2 Electroreduction

Bi-based electrocatalysts have been widely investigated in the CO₂ reduction reaction (CO₂ RR) for the formation of formate. However, it remains a challenge to achieve high Faradaic efficiency (FE) and industrial current densities at low overpotentials for obtaining both high formate productivity and energy efficiency (EE). Herein, we report an Ag-Bi₂ O₃ hybrid nanofiber (Ag-Bi₂ O₃ ) for highly efficient electrochemical reduction of CO₂ to formate. Ag-Bi₂ O₃ exhibits a formate FE of >90% for current densities from -10 to -250 mA ⋅ cm^-2 and attains a yield rate of 11.7 mmol ⋅ s^-1  ⋅ m^-2 at -250 mA ⋅ cm^-2 . Moreover, Ag-Bi₂ O₃ increased the EE (52.7%) by nearly 10% compared to a Bi₂ O₃ only counterpart. Structural characterization and in-situ Raman results suggest that the presence of Ag induced the conversion of Bi₂ O₃ from a monoclinic phase (α-Bi₂ O₃ ) to a metastable tetragonal phase (β-Bi₂ O₃ ) and accelerated the formation of active metallic Bi at low overpotentials (at > -0.3 V), which together contributes to the highly efficient formate formation.

Bionic Construction of Helical Bi2 O3 Microfibers for Highly Efficient CO2 Electroreduction

Helical Bi₂ O₃ microfibers (HBM) were prepared with the assistance of cotton template through a simple heating treatment in air. This twisted structure induced the lattice strains, enriched the oxygen vacancies of Bi₂ O₃ , and promoted the sufficient exposure of active sites simultaneously, thus performing outstanding activity and selectivity as catalyst for CO₂ electroreduction to formate. The faradaic efficiency (FE) of formate reached 100.4±1.9 % at -0.90 V vs. reversible hydrogen electrode (RHE) in an H-cell, and the partial current density was boosted to 226 mA cm^-2 with FE_formate of 96 % at -1.08 V vs. RHE in a flow cell. This work may open a new era for construction of metal oxide fibers by bionic strategy as high-performance electrocatalysts.